Customer Support: 131 242

  • There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

ISO 11140-4:2007

Current
Current

The latest, up-to-date edition.

Sterilization of health care products — Chemical indicators — Part 4: Class 2 indicators as an alternative to the Bowie and Dick-type test for detection of steam penetration
Available format(s)

Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users

Language(s)

English, French

Published date

15-03-2007

ISO 11140-4:2007 specifies the performance for a Class 2 indicator to be used as an alternative to the Bowie and Dick-type test for steam sterilizers for wrapped health care goods (instruments, etc. and porous loads).

An indicator complying with ISO 11140-4:2007 incorporates a specified material which is used as a test load. This test load may, or may not, be re-usable. ISO 11140-4:2007 does not specify requirements for the test load, but specifies the performance of the indicator in combination with the test load with which it is intended to be used. The indicator specified in ISO 11140-4:2007 is intended to identify poor steam penetration but does not necessarily indicate the cause of this poor steam penetration.

This part of ISO 11140-4:2007 does not include test methods to establish the suitability of these indicators for use in sterilizers in which the air removal stage does not include evacuation below atmospheric pressure.

DevelopmentNote
Supersedes ISO/DIS 11140-4. (03/2007)
DocumentType
Standard
Pages
35
PublisherName
International Organization for Standardization
Status
Current
Supersedes

PLUS 1173 (1st ed. pub. 2012) Guide to the selection and use of sterilization indicators
PREN ISO 11140-1 : DRAFT 2012 STERILIZATION OF HEALTH CARE PRODUCTS - CHEMICAL INDICATORS - PART 1: GENERAL REQUIREMENTS (ISO/DIS 11140-1:2012)
CSA Z15882 : 2009 : R2014 STERILIZATION OF HEALTH CARE PRODUCTS - CHEMICAL INDICATORS - GUIDANCE FOR SELECTION, USE AND INTERPRETATION OF RESULTS
DIN EN ISO 16061:2015-09 Instrumentation for use in association with non-active surgical implants - General requirements (ISO 16061:2015)
PREN 285 : DRAFT 2013 STERILIZATION - STEAM STERILIZERS - LARGE STERILIZERS
05/30138310 DC : DRAFT AUG 2005 ISO 15882 ED 2 - STERILIZATION OF HEALTH CARE PRODUCTS - CHEMICAL INDICATORS - GUIDANCE FOR SELECTION, USE AND INTERPRETATION OF RESULTS
AAMI ISO TIR 17665-3:2014 STERILIZATION OF HEALTH CARE PRODUCTS - MOIST HEAT - GUIDANCE ON THE DESIGNATION OF A MEDICAL PRODUCT TO A PRODUCT FAMILY AND PROCESSING CATEGORY FOR STEAM STERILIZATION
AAMI/ISO TIR17665-3:2014(R2016) STERILIZATION OF HEALTH CARE PRODUCTS - MOIST HEAT - GUIDANCE ON THE DESIGNATION OF A MEDICAL PRODUCT TO A PRODUCT FAMILY AND PROCESSING CATEGORY FOR STEAM STERILIZATION
ONORM EN ISO 18472 : 2006 STERILIZATION OF HEALTH CARE PRODUCTS - BIOLOGICAL AND CHEMICAL INDICATORS - TEST EQUIPMENT
CSA Z17665-1 : 2009 : FR STERILIZATION OF HEALTH CARE PRODUCTS - MOIST HEAT - PART 1: REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES
EN 285:2015 Sterilization - Steam sterilizers - Large sterilizers
DIN EN ISO 11140-1:2015-03 Sterilization of health care products - Chemical indicators - Part 1: General requirements (ISO 11140-1:2014)
BS EN ISO 11140-1:2014 Sterilization of health care products. Chemical indicators General requirements
BS EN ISO 14534:2015 Ophthalmic optics. Contact lenses and contact lens care products. Fundamental requirements
ISO 11140-1:2014 Sterilization of health care products Chemical indicators Part 1: General requirements
DIN EN ISO 15882:2008-12 STERILIZATION OF HEALTH CARE PRODUCTS - CHEMICAL INDICATORS - GUIDANCE FOR SELECTION, USE AND INTERPRETATION OF RESULTS
EN ISO 11140-1:2014 Sterilization of health care products - Chemical indicators - Part 1: General requirements (ISO 11140-1:2014)
UNE-EN ISO 16061:2015 Instrumentation for use in association with non-active surgical implants - General requirements (ISO 16061:2015)
I.S. EN ISO 17665-1:2006 STERILIZATION OF HEALTH CARE PRODUCTS - MOIST HEAT - PART 1: REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES
PD ISO/TS 17665-3:2013 Sterilization of health care products. Moist heat Guidance on the designation of a medical device to a product family and processing category for steam sterilization
12/30238553 DC : 0 BS EN ISO 11140-1 - STERILIZATION OF HEALTH CARE PRODUCTS - CHEMICAL INDICATORS - PART 1: GENERAL REQUIREMENTS
13/30278676 DC : 0 BS EN 285 - STERILIZATION - STEAM STERILIZERS - LARGE STERILIZERS
04/30048205 DC : DRAFT JUL 2004 BS EN ISO 17665 - STERILIZATION OF HEALTH CARE PRODUCTS - MOIST HEAT - DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES
UNI CEN ISO/TS 17665-2 : 2009 STERILIZATION OF HEALTH CARE PRODUCTS - MOIST HEAT - PART 2: GUIDANCE ON THE APPLICATION OF ISO 17665-1
BS EN ISO 18472:2006 Sterilization of health care products. Biological and chemical indicators. Test equipment and methods
EN ISO 18472:2006 Sterilization of health care products - Biological and chemical indicators - Test equipment (ISO 18472:2006)
CSA Z17665-2:09 (R2019) Sterilization of health care products — Moist heat — Part 2: Guidance on the application of ISO 17665-1 (ISO/TS 17665-2:2009, IDT)
DIN EN ISO 17665-1:2006-11 Sterilization of health care products - Moist heat - Part 1: Requirements for the development, validation and routine control of a sterilization process for medical devices (ISO 17665-1:2006)
I.S. EN ISO 14534:2015 OPHTHALMIC OPTICS - CONTACT LENSES AND CONTACT LENS CARE PRODUCTS - FUNDAMENTAL REQUIREMENTS (ISO 14534:2011)
I.S. EN ISO 11140-1:2014 STERILIZATION OF HEALTH CARE PRODUCTS - CHEMICAL INDICATORS - PART 1: GENERAL REQUIREMENTS (ISO 11140-1:2014)
I.S. EN ISO 15882:2008 STERILIZATION OF HEALTH CARE PRODUCTS - CHEMICAL INDICATORS - GUIDANCE FOR SELECTION, USE AND INTERPRETATION OF RESULTS
VDI 6300 Blatt 1:2016-05 Genetic engineering operations in genetic engineering facilities - Guidance on safe operation of genetic engineering facilities
I.S. EN 285:2015 STERILIZATION - STEAM STERILIZERS - LARGE STERILIZERS
13/30285624 DC : 0 BS EN ISO 16061 - INSTRUMENTATION FOR USE IN ASSOCIATION WITH NON-ACTIVE SURGICAL IMPLANTS - GENERAL REQUIREMENTS
16/30330536 DC : 0 BS EN ISO 18472 - STERILIZATION OF HEALTH CARE PRODUCTS - BIOLOGICAL AND CHEMICAL INDICATORS - TEST EQUIPMENT
CSA Z15882 :2009 STERILIZATION OF HEALTH CARE PRODUCTS - CHEMICAL INDICATORS - GUIDANCE FOR SELECTION, USE AND INTERPRETATION OF RESULTS
09/30207531 DC : 0 BS EN ISO 14534 - OPHTHALMIC OPTICS - CONTACT LENSES AND CONTACT LENS CARE PRODUCTS - FUNDAMENTAL REQUIREMENTS
AAMI ISO 15882 : 2008 STERILIZATION OF HEALTH CARE PRODUCTS - CHEMICAL INDICATORS - GUIDANCE FOR SELECTION, USE AND INTERPRETATION OF RESULTS
CSA Z17665-2:09 (R2019) Sterilization of health care products - Moist heat - Part 2: Guidance on the application of ISO 17665-1 (Adopted ISO/TS 17665-2:2009, first edition, 2009-01-15)
CSA Z15882:09 (R2019) Sterilization of health care products - Chemical indicators - Guidance for selection, use and interpretation of results (Adopted ISO 15882:2008, second edition, 2008-09-01)
CAN/CSA-Z314-18 Canadian medical device reprocessing
ANSI/AAMI ISO 17665-1:2006(R2013) STERILIZATION OF HEALTH CARE PRODUCTS - MOIST HEAT - PART 1: REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES
CSA Z17665-1 : 2009 : R2014 STERILIZATION OF HEALTH CARE PRODUCTS - MOIST HEAT - PART 1: REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES
ISO/TS 17665-3:2013 Sterilization of health care products — Moist heat — Part 3: Guidance on the designation of a medical device to a product family and processing category for steam sterilization
DIN EN 285:2016-05 Sterilization - Steam sterilizers - Large sterilizers
UNE-EN ISO 11140-1:2015 Sterilization of health care products - Chemical indicators - Part 1: General requirements (ISO 11140-1:2014)
UNI EN ISO 15882 : 2009 STERILIZATION OF HEALTH CARE PRODUCTS - CHEMICAL INDICATORS - GUIDANCE FOR SELECTION, USE AND INTERPRETATION OF RESULTS
AAMI ISO TIR 17665-2 : 2009 STERILIZATION OF HEALTH CARE PRODUCTS - MOIST HEAT - PART 2: GUIDANCE ON THE APPLICATION OF ANSI/AAMI/ISO 17665-1
CSA Z17665-1:09 (R2019) Sterilization of health care products - Moist heat - Part 1: Requirements for the development, validation and routine control of a sterilization process for medical devices (Adopted ISO 17665-1:2006, first edition, 2006-08-15, with Canadian deviations)
AAMI/ISO TIR17665-2:2009(R2016) STERILIZATION OF HEALTH CARE PRODUCTS - MOIST HEAT - PART 2: GUIDANCE ON THE APPLICATION OF ANSI/AAMI/ISO 17665-1
ISO 18472:2006 Sterilization of health care products Biological and chemical indicators Test equipment
I.S. EN ISO 18472:2006 STERILIZATION OF HEALTH CARE PRODUCTS - BIOLOGICAL AND CHEMICAL INDICATORS - TEST EQUIPMENT
I.S. EN ISO 16061:2015 INSTRUMENTATION FOR USE IN ASSOCIATION WITH NON-ACTIVE SURGICAL IMPLANTS - GENERAL REQUIREMENTS (ISO 16061:2015)
DIN EN ISO 14534:2015-08 Ophthalmic optics - Contact lenses and contact lens care products - Fundamental requirements (ISO 14534:2011)
ISO 16061:2015 Instrumentation for use in association with non-active surgical implants General requirements
ANSI/AAMI/ISO 15882:2008(R2013) STERILIZATION OF HEALTH CARE PRODUCTS - CHEMICAL INDICATORS - GUIDANCE FOR SELECTION, USE AND INTERPRETATION OF RESULTS
BS EN ISO 17665-1:2006 Sterilization of health care products. Moist heat Requirements for the development, validation and routine control of a sterilization process for medical devices
ISO 17665-1:2006 Sterilization of health care products — Moist heat — Part 1: Requirements for the development, validation and routine control of a sterilization process for medical devices
ISO 14534:2011 Ophthalmic optics Contact lenses and contact lens care products Fundamental requirements
BS EN 285:2015 Sterilization. Steam sterilizers. Large sterilizers
UNE-EN ISO 14534:2015 Ophthalmic optics - Contact lenses and contact lens care products - Fundamental requirements (ISO 14534:2011)
BS EN ISO 15882:2008 Sterilization of health care products. Chemical indicators. Guidance for selection, use and interpretation of results
EN ISO 14534:2015 Ophthalmic optics - Contact lenses and contact lens care products - Fundamental requirements (ISO 14534:2011)
EN ISO 17665-1 : 2006 Sterilization of health care products - Moist heat - Part 1: Requirements for the development, validation and routine control of a sterilization process for medical devices (ISO 17665-1:2006)
EN ISO 15882:2008 Sterilization of health care products - Chemical indicators - Guidance for selection, use and interpretation of results (ISO 15882:2008)
BS EN ISO 16061:2015 Instrumentation for use in association with non-active surgical implants. General requirements
DD CEN ISO/TS 17665-2:2009 Sterilization of health care products. Moist heat Guidance on the application of ISO 17665-1
S.R. CEN ISO/TS 17665-2:2009 STERILIZATION OF HEALTH CARE PRODUCTS - MOIST HEAT - PART 2: GUIDANCE ON THE APPLICATION OF ISO 17665-1
CSA Z17665-2 : 2009 : R2014 STERILIZATION OF HEALTH CARE PRODUCTS - MOIST HEAT - PART 2: GUIDANCE ON THE APPLICATION OF ISO 17665-1
AAMI ISO 17665-1 : 2006 STERILIZATION OF HEALTH CARE PRODUCTS - MOIST HEAT - PART 1: REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES
AAMI ISO 18472 : 2007 STERILIZATION OF HEALTH CARE PRODUCTS - BIOLOGICAL AND CHEMICAL INDICATORS - TEST EQUIPMENT
CSA ISO 11140-1 : 2016 STERILIZATION OF HEALTH CARE PRODUCTS - CHEMICAL INDICATORS - PART 1: GENERAL REQUIREMENTS
UNE-EN 285:2016 Sterilization - Steam sterilizers - Large sterilizers
ISO 15882:2008 Sterilization of health care products — Chemical indicators — Guidance for selection, use and interpretation of results
ISO/TS 17665-2:2009 Sterilization of health care products — Moist heat — Part 2: Guidance on the application of ISO 17665-1
EN ISO 16061:2015 Instrumentation for use in association with non-active surgical implants - General requirements (ISO 16061:2015)
CEN ISO/TS 17665-2:2009 Sterilization of health care products - Moist heat - Part 2: Guidance on the application of ISO 17665-1 (ISO/TS 17665-2:2009)

ISO 5636-3:2013 Paper and board — Determination of air permeance (medium range) — Part 3: Bendtsen method
ISO 15882:2008 Sterilization of health care products — Chemical indicators — Guidance for selection, use and interpretation of results
EN 285:2015 Sterilization - Steam sterilizers - Large sterilizers
ISO 11140-3:2007 Sterilization of health care products — Chemical indicators — Part 3: Class 2 indicator systems for use in the Bowie and Dick-type steam penetration test
ISO 187:1990 Paper, board and pulps — Standard atmosphere for conditioning and testing and procedure for monitoring the atmosphere and conditioning of samples
ISO 11140-1:2014 Sterilization of health care products Chemical indicators Part 1: General requirements
ISO 5-4:2009 Photography and graphic technology Density measurements Part 4: Geometric conditions for reflection density
ISO 5-3:2009 Photography and graphic technology Density measurements Part 3: Spectral conditions
IEC 60751:2008 Industrial platinum resistance thermometers and platinum temperature sensors
ISO 5-1:2009 Photography and graphic technology Density measurements Part 1: Geometry and functional notation
ISO 9001:2015 Quality management systems — Requirements
ISO/CIE 10526:1999 CIE standard illuminants for colorimetry
ISO 2248:1985 Packaging Complete, filled transport packages Vertical impact test by dropping
ISO 10012-1:1992 Quality assurance requirements for measuring equipment Part 1: Metrological confirmation system for measuring equipment
ISO 17665-1:2006 Sterilization of health care products — Moist heat — Part 1: Requirements for the development, validation and routine control of a sterilization process for medical devices

View more information
$284.56
Including GST where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Need help?
Call us on 131 242, then click here to start a Screen Sharing session
so we can help right away! Learn more