Customer Support: 131 242

  • There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

ISO 11452-1:2015

Current
Current

The latest, up-to-date edition.

Road vehicles Component test methods for electrical disturbances from narrowband radiated electromagnetic energy Part 1: General principles and terminology
Available format(s)

Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users

Language(s)

English

Published date

02-06-2015

ISO 11452-1:2015 specifies general conditions, defines terms, gives practical guidelines, and establishes the basic principles of the component tests used in the other parts of ISO 11452 for determining the immunity of electronic components of passenger cars and commercial vehicles to electrical disturbances from narrowband radiated electromagnetic energy, regardless of the vehicle propulsion system (e.g. spark-ignition engine, diesel engine, electric motor).

The electromagnetic disturbances considered are limited to continuous narrowband electromagnetic fields. A wide frequency range (d.c. and 15 Hz to 18 GHz) is allowed for the immunity testing of the components in this and in the other parts of ISO 11452.

DevelopmentNote
Supersedes ISO/DIS 11452-1. (06/2015)
DocumentType
Standard
Pages
33
PublisherName
International Organization for Standardization
Status
Current
Supersedes

Standards Relationship
SS-ISO 11452-1 : 2015 Identical
BS ISO 11452-1:2015 Identical
NEN ISO 11452-1 : 2015 Identical
UNE 26472-1:1998 Identical
DIN ISO 11452-1:2000-03 Identical

BS ISO 11452-3:2016 Road vehicles. Component test methods for electrical disturbances from narrowband radiated electromagnetic energy Transverse electromagnetic (TEM) cell
SAE J 1113/1 : 2013 ELECTROMAGNETIC COMPATIBILITY MEASUREMENT PROCEDURES AND LIMITS FOR COMPONENTS OF VEHICLES, BOATS (UP TO 15 M), AND MACHINES (EXCEPT AIRCRAFT) (16.6 HZ TO 18 GHZ)
17/30341351 DC : 0 BS ISO 11452-2 - ROAD VEHICLES - COMPONENT TEST METHODS FOR ELECTRICAL DISTURBANCES FROM NARROWBAND RADIATED ELECTROMAGNETIC ENERGY - PART 2: ABSORBER-LINED SHIELDED ENCLOSURE
08/30190852 DC : DRAFT OCT 2008 BS EN 61000-4-21 ED2 - ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-21: TESTING AND MEASUREMENT TECHNIQUES - REVERBERATION CHAMBER TEST METHODS
SAE J 1113/21 : 2013 ELECTROMAGNETIC COMPATIBILITY MEASUREMENT PROCEDURE FOR VEHICLE COMPONENTS - PART 21: IMMUNITY TO ELECTROMAGNETIC FIELDS, 30 MHZ TO 18 GHZ, ABSORBER-LINED CHAMBER
SAE J ISO 13766 : FEB 2003 EARTH-MOVING MACHINERY - ELECTROMAGNETIC COMPATIBILITY
PREN 15194 : DRAFT 2015 CYCLES - ELECTRICALLY POWER ASSISTED CYCLES - EPAC BICYCLES
SAE J 2954 : 2017 WIRELESS POWER TRANSFER FOR LIGHT-DUTY PLUG-IN/ELECTRIC VEHICLES AND ALIGNMENT METHODOLOGY
ISO 7634:2007 Road vehicles Compressed air braking systems for towed vehicles including those with electronic braking control functions Test procedures
I.S. EN 62132-4:2006 INTEGRATED CIRCUITS - MEASUREMENT OF ELECTROMAGNETIC IMMUNITY 150 KHZ TO 1 GHZ - PART 4: DIRECT RF POWER INJECTION METHOD
17/30358367 DC : 0 BS EN 17128 - NON-APPROVED LIGHT MOTORIZED VEHICLES FOR THE TRANSPORTATION OF PERSONS AND GOODS AND RELATED FACILITIES - PERSONAL LIGHT ELECTRIC VEHICLES (PLEV) - SAFETY REQUIREMENTS AND TEST METHODS
01/714099 DC : DRAFT OCT 2001 ISO 16750-2 - ROAD VEHICLES - ENVIRONMENTAL CONDITIONS AND TESTING FOR ELECTRICAL AND ELECTRONIC EQUIPMENT - PART 2: ELECTRICAL LOADS
EN 13309:2010 Construction machinery - Electromagnetic compatibility of machines with internal power supply
EN 62132-4:2006 Integrated circuits - Measurement of electromagnetic immunity 150 kHz to 1 GHz - Part 4: Direct RF power injection method
07/30147416 DC : 0 BS ISO 10605 - ROAD VEHICLES - TEST METHODS FOR ELECTRICAL DISTURBANCES FROM ELECTROSTATIC DISCHARGE
EN 61851-21-1:2017/AC:2017-11 ELECTRIC VEHICLE CONDUCTIVE CHARGING SYSTEM - PART 21-1: ELECTRIC VEHICLE ON-BOARD CHARGER EMC REQUIREMENTS FOR CONDUCTIVE CONNECTION TO AN AC/DC SUPPLY (IEC 61851-21-1:2017)
ISO 11452-11:2010 Road vehicles Component test methods for electrical disturbances from narrowband radiated electromagnetic energy Part 11: Reverberation chamber
06/30151992 DC : DRAFT JUN 2006 BS ISO 22239-2 - ROAD VEHICLES - CHILD SEAT PRESENCE AND ORIENTATION DETECTION SYSTEM (ISOCARE) - PART 2: RESONATOR SPECIFICATION
13/30261304 DC : 0 BS ISO 11452-8 - ROAD VEHICLES - COMPONENT TEST METHODS FOR ELECTRICAL DISTURBANCES FROM NARROWBAND RADIATED ELECTROMAGNETIC ENERGY - PART 8: IMMUNITY TO MAGNETIC FIELDS
07/30157503 DC : 0 BS ISO 11452-10 - ROAD VEHICLES - COMPONENT TEST METHODS FOR ELECTRICAL DISTURBANCES FROM NARROWBAND RADIATED ELECTROMAGNETIC ENERGY - PART 10: CONDUCTED IMMUNITY IN THE EXTENDED AUDIO FREQUENCY RANGE
SAE J 2578 : 2014 RECOMMENDED PRACTICE FOR GENERAL FUEL CELL VEHICLE SAFETY
ISO 11452-7:2003 Road vehicles Component test methods for electrical disturbances from narrowband radiated electromagnetic energy Part 7: Direct radio frequency (RF) power injection
BS EN 15194:2017 Cycles. Electrically power assisted cycles. EPAC Bicycles
IEC 60839-10-1:1995 Alarm systems - Part 10: Alarm systems for road vehicles - Section 1: Passenger cars
CEI 79-51 : 2006 COMMUNICATION PROTOCOL FOR SECURITY INFORMATION (ALARMS) - PART 1: TRANSPORT LAYERS
NF ISO 11452-5 : 2004 ROAD VEHICLES - COMPONENT TEST METHODS FOR ELECTRICAL DISTURBANCES FROM NARROWBAND RADIATED ELECTROMAGNETIC ENERGY - PART 5: STRIP LINE
ISO 11452-3:2016 Road vehicles — Component test methods for electrical disturbances from narrowband radiated electromagnetic energy — Part 3: Transverse electromagnetic (TEM) cell
UNE-EN 13309:2010 Construction machinery - Electromagnetic compatibility of machines with internal power supply
ISO 14982:1998 Agricultural and forestry machinery Electromagnetic compatibility Test methods and acceptance criteria
I.S. EN 13309:2010 CONSTRUCTION MACHINERY - ELECTROMAGNETIC COMPATIBILITY OF MACHINES WITH INTERNAL POWER SUPPLY
I.S. EN ISO 14982:2009 AGRICULTURAL AND FORESTRY MACHINERY - ELECTROMAGNETIC COMPATIBILITY - TEST METHODS AND ACCEPTANCE CRITERIA
ISO/TR 12155:1994 Commercial vehicles Obstacle detection device during reversing Requirements and tests
BS EN 61851-21-1:2017 Electric vehicle conductive charging system Electric vehicle on-board charger EMC requirements for conductive connection to an AC/DC supply
BS ISO 11452-11:2010 Road vehicles. Component test methods for electrical disturbances from narrowband radiated electromagnetic energy Reverberation chamber
BS ISO 7634:2007 Road vehicles. Compressed air braking systems for towed vehicles including those with electronic braking control functions .Test procedures
15/30321305 DC : 0 BS EN 15194 - CYCLES - ELECTRICALLY POWER ASSISTED CYCLES - EPAC BICYCLES
CEI EN 62132-4 : 2006 CIRCUITS INTEGRES - MESURE DE L'IMMUNITE ELECTROMAGNETIQUE 150 KHZ A 1 GHZ - PARTIE 4: METHODE D'INJECTION DIRECTE DE PUISSANCE RF
06/30157139 DC : 0
00/706017 DC : DRAFT MAR 2000 BS ISO 15763 - ROAD VEHICLES - ALARM SYSTEMS FOR COMMERCIAL VEHICLES
NF ISO 13766 : 1999 EARTH-MOVING MACHINERY - ELECTROMAGNETIC COMPATIBILITY
ISO 13766-1:2018 Earth-moving and building construction machinery — Electromagnetic compatibility (EMC) of machines with internal electrical power supply — Part 1: General EMC requirements under typical electromagnetic environmental conditions
NF ISO 12097-3 : 2003 ROAD VEHICLES - AIRBAG COMPONENTS - PART 3: TESTING OF INFLATOR ASSEMBLIES
ISO 11835:2002 Road vehicles Motor vehicles with antilock braking systems (ABS) Measurement of braking performance
I.S. EN 61851-21-1:2017 ELECTRIC VEHICLE CONDUCTIVE CHARGING SYSTEM - PART 21-1: ELECTRIC VEHICLE ON-BOARD CHARGER EMC REQUIREMENTS FOR CONDUCTIVE CONNECTION TO AN AC/DC SUPPLY
ISO 10605:2008 Road vehicles — Test methods for electrical disturbances from electrostatic discharge
I.S. EN 15194:2017 CYCLES - ELECTRICALLY POWER ASSISTED CYCLES - EPAC BICYCLES
04/30089279 DC : DRAFT FEB 2004 ISO 21848 - ROAD VEHICLES - ELECTRICAL AND ELECTRONIC EQUIPMENT FOR 42 V NETWORKS - ELECTRICAL LOADS
UNI EN 13309 : 2010 CONSTRUCTION MACHINERY - ELECTROMAGNETIC COMPATIBILITY OF MACHINES WITH INTERNAL POWER SUPPLY
UNI EN ISO 14982 : 2009 AGRICULTURAL AND FORESTRY MACHINERY - ELECTROMAGNETIC COMPATIBILITY - TEST METHODS AND ACCEPTANCE CRITERIA
ISO 15763:2002 Road vehicles Alarm systems for buses and commercial vehicles of maximum authorized total mass greater than 3,5 t
10/30205310 DC : 0 BS ISO 11452-4 - ROAD VEHICLES - COMPONENT TEST METHODS FOR ELECTRICAL DISTURBANCES FROM NARROWBAND RADIATED ELECTROMAGNETIC ENERGY - PART 4: HARNESS EXCITATION METHODS
03/301512 DC : DRAFT JAN 2003 BS ISO 11452-2 - ROAD VEHICLES - COMPONENT TEST METHODS FOR ELECTRICAL DISTURBANCES FROM NARROWBAND RADIATED ELECTROMAGNETIC ENERGY - PART 2: ABSORBER-LINED SHIELDED ENCLOSURE
16/30316581 DC : 0 BS EN ISO 13766-2 - EARTH-MOVING MACHINERY - ELECTROMAGNETIC COMPATIBILITY - PART 2: EMC REQUIREMENTS UNDER THE ASPECT OF FUNCTIONAL SAFETY
16/30316578 DC : 0 BS EN ISO 13766-1 - EARTH-MOVING- AND BUILDING CONSTRUCTION MACHINERY - ELECTROMAGNETIC COMPATIBILITY OF MACHINES WITH INTERNAL ELECTRICAL POWER SUPPLY - PART 1: GENERAL EMC REQUIREMENTS UNDER TYPICAL EMC ENVIRONMENTAL CONDITIONS
00/709873 DC : DRAFT JUN 2000 ISO/DIS 11452-5 - ROAD VEHICLES - COMPONENT TEST METHODS FOR ELECTRICAL DISTURBANCES BY NARROWBAND RADIATED ELECTROMAGNETIC ENERGY - PART 5: STRIPLINE
05/30114081 DC : DRAFT SEP 2005 ISO 11452-8 - ROAD VEHICLES - COMPONENT TEST METHODS FOR ELECTRICAL DISTURBANCES FOR NARROWBAND RADIATED ELECTROMAGNETIC ENERGY - PART 8: IMMUNITY TO RADIATED MAGNETIC FIELDS
ISO 11452-2:2004 Road vehicles Component test methods for electrical disturbances from narrowband radiated electromagnetic energy Part 2: Absorber-lined shielded enclosure
08/30172385 DC : DRAFT OCT 2008 BS ISO 11452-11 - ROAD VEHICLES - COMPONENT TEST METHODS FOR ELECTRICAL DISTURBANCES FROM NARROWBAND RADIATED ELECTROMAGNETIC ENERGY - PART 11: RADIATED IMMUNITY TEST METHOD USING A REVERBERATION CHAMBER
01/707379 DC : DRAFT APR 2001 ISO/DIS 11452-7 - ROAD VEHICLES - COMPONENT TEST METHODS FOR ELECTRICAL DISTURBANCES FROM NARROWBAND RADIATED ELECTROMAGNETIC ENERGY - PART 7: DIRECT RADIO FREQUENCY (RF) POWER INJECTION
SAE J 2357 : 2012 APPLICATION GUIDELINES FOR ELECTRONICALLY DRIVEN AND/OR CONTROLLED EXTERIOR AUTOMOTIVE LIGHTING EQUIPMENT
BS ISO 10605 : 2008 ROAD VEHICLES - TEST METHODS FOR ELECTRICAL DISTURBANCES FROM ELECTROSTATIC DISCHARGE
15/30304065 DC : 0 BS ISO 11452-3 - ROAD VEHICLES - COMPONENT TEST METHODS FOR ELECTRICAL DISTURBANCES FROM NARROWBAND RADIATED ELECTROMAGNETIC ENERGY - PART 3: TRANSVERSE ELECTROMAGNETIC MODE (TEM) CELL
05/30127980 DC : DRAFT JAN 2005 ISO 13766 - EARTH-MOVING MACHINERY - ELECTROMAGNETIC COMPATIBILITY
NF ISO 11452-7 : 2004 ROAD VEHICLES - COMPONENT TEST METHODS FOR ELECTRICAL DISTURBANCES FROM NARROWBAND RADIATED ELECTROMAGNETIC ENERGY - PART 7: DIRECT RADIO FREQUENCY (RF) POWER INJECTION
ISO 11452-4:2011 Road vehicles Component test methods for electrical disturbances from narrowband radiated electromagnetic energy Part 4: Harness excitation methods
IEC 61851-21-1:2017 Electric vehicle conductive charging system - Part 21-1 Electric vehicle on-board charger EMC requirements for conductive connection to AC/DC supply
DIN EN ISO 14982:2009-12 Agricultural and forestry machines - Electromagnetic compatibility - Test methods and acceptance criteria (ISO 14982:1998)
IEC 62132-4:2006 Integrated circuits - Measurement of electromagnetic immunity 150 kHz to 1 GHz - Part 4: Direct RF power injection method
EN ISO 14982:2009 Agricultural and forestry machinery - Electromagnetic compatibility - Test methods and acceptance criteria (ISO 14982:1998)
EN 15194:2017 Cycles - Electrically power assisted cycles - EPAC Bicycles
ISO 11452-10:2009 Road vehicles Component test methods for electrical disturbances from narrowband radiated electromagnetic energy Part 10: Immunity to conducted disturbances in the extended audio frequency range
BS ISO 11452-9:2012 Road vehicles. Component test methods for electrical disturbances from narrowband radiated electromagnetic energy Portable transmitters
BS ISO 7635:2006 Road vehicles. Air and air/hydraulic braking systems of motor vehicles, including those with electronic control functions. Test procedures
BS ISO 11452-8:2015 Road vehicles. Component test methods for electrical disturbances from narrowband radiated electromagnetic energy Immunity to magnetic fields
BS EN 62132-4:2006 Integrated circuits. Measurement of electromagnetic immunity. 150 kHz to 1 GHz Direct RF power injection method
08/30159225 DC : 0 BS ISO 11452-9 - ROAD VEHICLES - COMPONENT TEST METHODS FOR ELECTRICAL DISTURBANCES FROM NARROWBAND RADIATED ELECTROMAGNETIC ENERGY - PART 9: PORTABLE TRANSMITTERS
ISO 11452-5:2002 Road vehicles — Component test methods for electrical disturbances from narrowband radiated electromagnetic energy — Part 5: Stripline
BS ISO 11452-4:2011 Road vehicles. Component test methods for electrical disturbances from narrowband radiated electromagnetic energy Harness excitation methods
03/317483 DC : DRAFT OCT 2003 ISO 11452-4 - ROAD VEHICLES - COMPONENT TEST METHODS FOR ELECTRICAL DISTURBANCES FROM NARROWBAND RADIATED ELECTROMAGNETIC ENERGY - PART 4: BULK CURRENT INJECTION (BCI)
07/30171041 DC : DRAFT AUG 2007 DD IEC/TS 61000-1-2 -ELECTROMAGNETIC COMPATIBILITY -GENERAL - METHODOLOGY FOR THE ACHIEVEMENT OF FUNCTIONAL SAFETY OF ELECTRICAL AND ELECTRONIC EQUIPMENT WITH REGARD TO ELECTROMAGNETIC PHENOMENA
BS ISO 11452-10:2009 Road vehicles. Component test methods for electrical disturbances from narrowband radiated electromagnetic energy Immunity to conducted disturbances in the extended audio frequency range
ISO/TR 15497:2000 Road vehicles Development guidelines for vehicle based software
CEI 79-56 : 2009 BLACK BOX TYPE SYSTEMS: FUNCTIONAL REQUIREMENTS AND TESTS
ISO 13766:2006 Earth-moving machinery Electromagnetic compatibility
ISO/TS 22239-2:2009 Road vehicles Child seat presence and orientation detection system (CPOD) Part 2: Resonator specification
ISO 7635:2006 Road vehicles Air and air/hydraulic braking systems of motor vehicles, including those with electronic control functions Test procedures
ISO 11452-9:2012 Road vehicles Component test methods for electrical disturbances from narrowband radiated electromagnetic energy Part 9: Portable transmitters
ISO 11452-8:2015 Road vehicles — Component test methods for electrical disturbances from narrowband radiated electromagnetic energy — Part 8: Immunity to magnetic fields
DIN EN 13309:2010-12 CONSTRUCTION MACHINERY - ELECTROMAGNETIC COMPATIBILITY OF MACHINES WITH INTERNAL POWER SUPPLY
BS EN ISO 14982:2009 Agricultural and forestry machinery. Electromagnetic compatibility. Test methods and acceptance criteria
BS EN 13309:2010 Construction machinery. Electromagnetic compatibility of machines with internal power supply

IEC 60050-726:1982 International Electrotechnical Vocabulary (IEV) - Part 726: Transmission lines and waveguides

View more information
$284.56
Including GST where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Need help?
Call us on 131 242, then click here to start a Screen Sharing session
so we can help right away! Learn more