Customer Support: 131 242

  • There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

ISO 1219-1:2012

Current
Current

The latest, up-to-date edition.

Fluid power systems and components — Graphical symbols and circuit diagrams — Part 1: Graphical symbols for conventional use and data-processing applications
Available format(s)

Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users

Published date

21-05-2012

Preview

ISO 1219-1:2012 establishes basic elements for symbols. It specifies rules for devising fluid power symbols for use on components and in circuit diagrams.

ISO 1219-1:2012 is a collective application standard of the ISO 14617 series. In ISO 1219-1:2012, the symbols are designed in fixed dimensions to be used directly in data processing systems, which might result in different variants.

DevelopmentNote
Supersedes ISO 1219 (04/2001) Supersedes NFPA T3.10.18 (09/2004) Supersedes NFPA T3.10.4 (04/2008) Supersedes ISO/DIS 1219-1. (05/2012)
DocumentType
Standard
Pages
178
PublisherName
International Organization for Standardization
Status
Current
Supersedes

11/30251717 DC : 0 BS EN 81-20 - SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 20: PASSENGER AND GOODS PASSENGER LIFTS
UNE-EN ISO 4414:2011 Pneumatic fluid power - General rules and safety requirements for systems and their components (ISO 4414:2010)
BS ISO 4392-1:2002 Hydraulic fluid power. Determination of characteristics of motors At constant low speed and constant pressure
BS 7403-12:2000 Full-flow lubricating oil filters for internal combustion engines Filtration efficiency using particle counting, and contaminant retention capacity
BS EN 81-31:2010 Safety rules for the construction and installation of lifts. Lifts for the transport of goods only Accessible goods only lifts
ISO 4548-14:2016 Methods of test for full-flow lubricating oil filters for internal combustion engines — Part 14: Cold start simulation and hydraulic pulse durability for composite filter housings
I.S. EN 12415:2000 SAFETY OF MACHINE TOOLS - SMALL NUMERICALLY CONTROLLED TURNING MACHINES AND TURNING CENTRES
13/30250817 DC : 0 BS ISO 6953-2 - PNEUMATIC FLUID POWER - COMPRESSED AIR PRESSURE REGULATORS AND FILTER-REGULATORS - PART 2: TEST METHODS TO DETERMINE THE MAIN CHARACTERISTICS TO BE INCLUDED IN LITERATURE FROM SUPPLIERS
ISO 7789:2007 Hydraulic fluid power Two-, three- and four-port screw-in cartridge valves Cavities
ISO/TS 22595-1:2006 Dentistry Plant area equipment Part 1: Suction systems
BS ISO 5599-2:2001 Pneumatic fluid power. Five-port directional control valves Mounting interface surfaces with optional electrical connector
BIS IS 8384 : 2013 HYDRAULIC FLUID POWER - FILTER ELEMENTS - VERIFICATION OF COLLAPSE/BURST PRESSURE RATING
08/30176286 DC : DRAFT JAN 2008 BS ISO 6358-3 - PNEUMATIC FLUID POWER - DETERMINATION OF FLOW-RATE CHARACTERISTICS OF COMPONENTS USING COMPRESSIBLE FLUIDS - PART 3: DISCHARGE TEST AS AN ALTERNATE TEST METHOD
DIN ISO 12238 E : 2005 PNEUMATIC FLUID POWER - DIRECTIONAL CONTROL VALVES - MEASUREMENT OF SHIFTING TIME
BS ISO 16908:2014 Hydraulic filter element test methods. Thermal conditioning and cold start-up simulation
13/30258990 DC : 0 BS ISO 16908 - HYDRAULIC FILTER ELEMENT TEST METHODS - THERMAL CONDITIONING AND COLD START-UP SIMULATION
NFPA T3.21.3 : 2008 : R2013 PNEUMATIC FLUID POWER - FLOW RATING TEST PROCEDURE AND REPORTING METHOD - FOR FIXED ORIFICE COMPONENTS
BS ISO 11011 : 2013 COMPRESSED AIR - ENERGY EFFICIENCY - ASSESSMENT
BS ISO 14085-3:2015 Aerospace series. Hydraulic filter elements. Test methods Filtration efficiency and retention capacity
ISO 1217:2009 Displacement compressors Acceptance tests
BS 7403-11:1998 Full-flow lubricating oil filters for internal combustion engines Methods of test for self-cleaning filters
08/30176283 DC : DRAFT JAN 2008 BS ISO 6358-2 - PNEUMATIC FLUID POWER - DETERMINATION OF FLOW-RATE CHARACTERISTICS OF COMPONENTS USING COMPRESSIBLE FLUIDS - PART 2: GENERAL RULES
BS 7403-1:1998 Full-flow lubricating oil filters for internal combustion engines Methods of test for differential pressure/flow characteristics
13/30271038 DC : 0 BS ISO 14085-4 - AEROSPACE SERIES - HYDRAULIC FILTER ELEMENTS - TEST METHODS - PART 4: VERIFICATION OF COLLAPSE/BURST PRESSURE RATING
14/30280597 DC : 0 BS ISO 1219-3 - FLUID POWER SYSTEMS AND COMPONENTS - GRAPHICAL SYMBOLS AND CIRCUIT DIAGRAMS - PART 3: SYMBOL MODULES AND CONNECTED SYMBOLS IN CIRCUIT DIAGRAMS
BS ISO 10770-3:2007 Hydraulic fluid power. Electrically modulated hydraulic control valves Test methods for pressure control valves
BS ISO 19438:2003 Diesel fuel and petrol filters for internal combustion engines. Filtration efficiency using particle counting and contaminant retention capacity
I.S. EN ISO 8230-1:2008 SAFETY REQUIREMENTS FOR DRY-CLEANING MACHINES - PART 1: COMMON SAFETY REQUIREMENTS
NFPA T3.21.8 : 2008 : R2013 PNEUMATIC FLUID POWER - MEASUREMENT OF RESPONSE TIME - DIRECTIONAL CONTROL VALVES
00/716569 DC : DRAFT NOV 2000 PREN 1804-3 - MACHINES FOR UNDERGROUND MINES - SAFETY REQUIREMENTS FOR HYDRAULIC POWERED ROOF SUPPORTS - PART 3: HYDRAULIC CONTROL SYSTEMS
09/30196757 DC : 0 BS ISO 10041-2 - PNEUMATIC FLUID POWER - ELECTRICALLY MODULATED PNEUMATIC FLOW RATE CONTROL VALVES - PART 2: TEST METHODS TO DETERMINATE MAIN CHARACTERISTICS TO INCLUDE IN THE SUPPLIER'S LITERATURE FOR THREE-PORT CONTROL VALVES
05/30075032 DC : DRAFT AUG 2005 ISO 23181 - HYDRAULIC FLUID POWER - FILTER ELEMENTS - DETERMINATION OF RESISTANCE TO FLOW FATIGUE USING HIGH VISCOSITY FLUID
MIL-STD-3001-1 Revision A:2014 PREPARATION OF DIGITAL TECHNICAL INFORMATION FOR MULTI-OUTPUT PRESENTATION OF TECHNICAL MANUALS (PART 1 OF 8 PARTS)
BS ISO 13357-2:2017 Petroleum products. Determination of the filterability of lubricating oils Procedure for dry oils
SAE J 2311 : 2015 AUTOMATIC TRANSMISSION HYDRAULIC PUMP TEST PROCEDURE
UNE-EN ISO 4413:2011 Hydraulic fluid power - General rules and safety requirements for systems and their components (ISO 4413:2010)
NFPA T3.21.8 : 2008 PNEUMATIC FLUID POWER - MEASUREMENT OF RESPONSE TIME - DIRECTIONAL CONTROL VALVES
EN 15339-2:2007 Thermal spraying - Safety requirements for thermal spraying equipment - Part 2: Gas control units
ISO 10770-2:2012 Hydraulic fluid power — Electrically modulated hydraulic control valves — Part 2: Test methods for three-port directional flow-control valves
ISO 4548-11:1997 Methods of test for full-flow lubricating oil filters for internal combustion engines Part 11: Self-cleaning filters
ISO 14617-1:2005 Graphical symbols for diagrams Part 1: General information and indexes
BS EN ISO 4414:2010 Pneumatic fluid power. General rules and safety requirements for systems and their components
ISO 1219-2:2012 Fluid power systems and components — Graphical symbols and circuit diagrams — Part 2: Circuit diagrams
UNI 10411-2 : 2014 MODIFICATION OF HYDRAULIC LIFTS NOT COMPLYING WITH DIRECTIVE 95/16/EC
ISO 13357-2:2017 Petroleum products — Determination of the filterability of lubricating oils — Part 2: Procedure for dry oils
BS ISO 6358-2:2013 Pneumatic fluid power. Determination of flow-rate characteristics of components using compressible fluids Alternative test methods
ISO 16889:2008 Hydraulic fluid power Filters Multi-pass method for evaluating filtration performance of a filter element
ISO 15086-3:2008 Hydraulic fluid power — Determination of the fluid-borne noise characteristics of components and systems — Part 3: Measurement of hydraulic impedance
UNI EN 81-20 : 2014 SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 20: PASSENGER AND GOODS PASSENGER LIFTS
DIN EN 1804-3:2010-05 Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 3: Hydraulic control systems (includes Amendment A1:2010)
NFPA 750 : 2015 WATER MIST FIRE PROTECTION SYSTEMS
BS ISO 27407:2010 Hydraulic fluid power. Marking of performance characteristics on hydraulic filters
17/30356606 DC : 0 BS ISO 8100-1 - LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 1: SAFETY REQUIREMENTS FOR PASSENGER AND GOODS PASSENGER LIFTS
BS EN ISO 10472-1:2008 Safety requirements for industrial laundry machinery Common requirements
I.S. EN 13443-2:2005 WATER CONDITIONING EQUIPMENT INSIDE BUILDINGS - MECHANICAL FILTERS - PART 2: PARTICLE RATING 1 [MU]M TO LESS THAN 80 [MU]M - REQUIREMENTS FOR PERFORMANCE, SAFETY AND TESTING
EN ISO 23125:2015 Machine tools - Safety - Turning machines (ISO 23125:2015, Corrected version 2016-03-15)
DIN ISO 12238:2005-12 Pneumatic fluid power - Directional control valves - Measurement of shifting time (ISO 12238:2001)
DIN EN 81-2:2000-05 SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PART 2: HYDRAULIC LIFTS
EN 13443-2:2005+A1:2007 Water conditioning equipment inside buildings - Mechanical filters - Part 2: Particle rating 1 µm to less than 80 µm - Requirements for performance, safety and testing
DIN EN 982:2009-06 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR FLUID POWER SYSTEMS AND THEIR COMPONENTS - HYDRAULICS
EN 12478:2000/AC:2001 SAFETY OF MACHINE TOOLS - LARGE NUMERICALLY CONTROLLED TURNING MACHINES AND TURNING CENTRES
BS ISO 4548-15:2014 Methods of test for full-flow lubricating oil filters for internal combustion engines Vibration fatigue test for composite filter housings
BS 7403-9:1995 Full-flow lubricating oil filters for internal combustion engines Method of test for inlet and outlet anti-drain valves
04/30022943 DC : DRAFT NOV 2004 BS ISO 12500-2 - FILTERS FOR COMPRESSED AIR - METHODS OF TEST - PART 2: OIL VAPOURS
ISO/TS 13353:2002 Diesel fuel and petrol filters for internal combustion engines Initial efficiency by particule counting
BS 7403-4:1998 Full-flow lubricating oil filters for internal combustion engines Methods of test for initial particle retention efficiency, life and cumulative efficiency (gravimetric method)
BS ISO 14085-4:2015 Aerospace series. Hydraulic filter elements. Test methods Verification of collapse/burst pressure rating
ISO 8573-8:2004 Compressed air — Part 8: Test methods for solid particle content by mass concentration
00/707842 DC : DRAFT APR 2000 ISO/CD 17559 - HYDRAULIC FLUID POWER - TEST METHOD FOR ELECTRICITY CONTROLLED OIL HYDRAULIC PUMPS
ISO 4409:2007 Hydraulic fluid power Positive-displacement pumps, motors and integral transmissions Methods of testing and presenting basic steady state performance
BS ISO 15407-2:2003 Pneumatic fluid power. Five-port directional control valves, sizes 18 mm and 26 mm Mounting interface surfaces with optional electrical connector
ISO/TS 16332:2006 Diesel engines Fuel filters Method for evaluating fuel/water separation efficiency
BS ISO 11727:1999 Pneumatic fluid power. Identification of ports and control mechanisms of control valves and other components
11/30182572 DC : 0 BS ISO 11011 - COMPRESSED AIR - ENERGY EFFICIENCY - ASSESSMENT
BS ISO 19973-2:2015 Pneumatic fluid power. Assessment of component reliability by testing Directional control valves
BS ISO 2941:2009 Hydraulic fluid power. Filter elements. Verification of collapse/burst pressure rating
BS ISO 15086-2:2000 Hydraulic fluid power. Determination of fluid-borne noise characteristics of components and systems Measurement of speed of sound in a fluid in a pipe
BS ISO 8426:2008 Hydraulic fluid power. Positive displacement pumps and motors. Determination of derived capacity
ISO 16908:2014 Hydraulic filter element test methods Thermal conditioning and cold start-up simulation
BS ISO 4548-9:2008 Methods of test for full-flow lubricating oil filters for internal combustion engines Inlet and outlet anti-drain valve tests
ISO 12500-2:2007 Filters for compressed air — Test methods — Part 2: Oil vapours
08/30186852 DC : DRAFT JULY 2008 BS EN ISO 4413 - HYDRAULIC FLUID POWER - GENERAL RULES AND SAFETY REQUIREMENTS FOR SYSTEMS AND THEIR COMPONENTS
BS 7403-2:1998 Full-flow lubricating oil filters for internal combustion engines Method of test for element by-pass valve characteristics
BS EN ISO 8230-1:2008 Safety requirements for dry-cleaning machines Common safety requirements
BS ISO 10767-3:1999 Hydraulic fluid power. Determination of pressure ripple levels generated in systems and components Method for motors
BS ISO 14085-5:2015 Aerospace series. Hydraulic filter elements. Test methods Resistance to flow fatigue
ISO 6358-2:2013 Pneumatic fluid power Determination of flow-rate characteristics of components using compressible fluids Part 2: Alternative test methods
BS ISO 1219-2:2012 Fluid power systems and components. Graphical symbols and circuit diagrams Circuit diagrams
BS EN ISO 11011:2015 Compressed air. Energy efficiency. Assessment
BS ISO 7183:2007 Compressed-air dryers. Specifications and testing
NF ISO 12500-3 : 2009 FILTERS FOR COMPRESSED AIR - TEST METHODS - PART 3: PARTICULATES
08/30168462 DC : DRAFT APR 2008 BS ISO 1217 - DISPLACEMENT COMPRESSORS - ACCEPTANCE TEST
BS ISO 8573-8:2004 Compressed air Test methods for solid particle content by mass concentration
NFPA T3.21.3 : 2008 PNEUMATIC FLUID POWER - FLOW RATING TEST PROCEDURE AND REPORTING METHOD - FOR FIXED ORIFICE COMPONENTS
BS ISO 17559:2003 Hydraulic fluid power. Electrically controlled hydraulic pumps. Test methods to determine performance characteristics
05/30125047 DC : DRAFT JAN 2005 ISO 19973-3 - PNEUMATIC FLUID POWER - DETERMINATION OF RELIABILITY BY TESTING - PART 3: PISTON ROD CYLINDERS
18/30358591 DC : 0 BS ISO 4411 - HYDRAULIC FLUID POWER - VALVES - DETERMINATION OF PRESSURE DIFFERENTIAL/FLOW CHARACTERISTICS
DIN EN ISO 4414:2011-04 Pneumatic fluid power - General rules and safety requirements for systems and their components (ISO 4414:2010)
I.S. EN ISO 6412-1:2018 TECHNICAL PRODUCT DOCUMENTATION - SIMPLIFIED REPRESENTATION OF PIPELINES - PART 1: GENERAL RULES AND ORTHOGONAL REPRESENTATION (ISO 6412-1:2017)
UNI ISO 5598 : 2012 FLUID POWER SYSTEMS AND COMPONENTS - VOCABULARY
SAE J 747 : 2017 CONTROL VALVE TEST PROCEDURE
BS ISO 16889 : 2008 HYDRAULIC FLUID POWER - FILTERS - MULTI-PASS METHOD FOR EVALUATING FILTRATION PERFORMANCE OF A FILTER ELEMENT
DIN ISO 1219-2:1996-11 FLUID POWER SYSTEMS AND COMPONENTS - GRAPHIC SYMBOLS AND CIRCUIT DIAGRAMS - PART 2: CIRCUIT DIAGRAMS
ISO 3968:2017 Hydraulic fluid power — Filters — Evaluation of differential pressure versus flow
ISO 1219-3:2016 Fluid power systems and components — Graphical symbols and circuit diagrams — Part 3: Symbol modules and connected symbols in circuit diagrams
ISO 2942:2004 Hydraulic fluid power Filter elements Verification of fabrication integrity and determination of the first bubble point
ISO 20401:2017 Pneumatic fluid power systems — Directional control valves — Specification of pin assignment for 8 mm and 12 mm diameter electrical round connectors
ISO/TR 18569:2004 Safety of machinery Guidelines for the understanding and use of safety of machinery standards
ISO 7183:2007 Compressed-air dryers Specifications and testing
NF EN 1804-3 : 2006 + A1 2010 MACHINES FOR UNDERGROUND MINES - SAFETY REQUIREMENTS FOR HYDRAULIC POWERED ROOF SUPPORTS - PART 3: HYDRAULIC CONTROL SYSTEMS
DIN EN 81-20 E : 2014 SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 20: PASSENGER AND GOODS PASSENGER LIFTS
BS ISO 17082:2004 Pneumatic fluid power. Valves. Data to be included in supplier literature
BS EN 13443-2 : 2005 WATER CONDITIONING EQUIPMENT INSIDE BUILDINGS - MECHANICAL FILTERS - PART 2: PARTICLE RATING 1 MICROMETER TO LESS THAN 80 MICROMETER - REQUIREMENTS FOR PERFORMANCE, SAFETY AND TESTING
ISO 10472-1:1997 Safety requirements for industrial laundry machinery Part 1: Common requirements
08/30170008 DC : DRAFT SEP 2008 BS ISO 27407 - HYDRAULIC FLUID POWER - MARKING OF PERFORMANCE CHARACTERISTICS ON HYDRAULIC FILTERS
UNE-EN 81-20:2017 Safety rules for the construction and installation of lifts - Lifts for the transport of persons and goods - Part 20: Passenger and goods passenger lifts
UNI EN 1804-3 : 2010 MACHINES FOR UNDERGROUND MINES - SAFETY REQUIREMENTS FOR HYDRAULIC POWERED ROOF SUPPORTS - PART 3: HYDRAULIC CONTROL SYSTEMS
I.S. EN 1804-3:2006 MACHINES FOR UNDERGROUND MINES - SAFETY REQUIREMENTS FOR HYDRAULIC POWERED ROOF SUPPORTS - PART 3: HYDRAULIC CONTROL SYSTEMS
I.S. EN 14652:2006 WATER CONDITIONING EQUIPMENT INSIDE BUILDINGS - MEMBRANE SEPARATION DEVICES - REQUIREMENTS FOR PERFORMANCE, SAFETY AND TESTING
I.S. EN ISO 128-20:2002 TECHNICAL DRAWINGS - GENERAL PRINCIPLES OF PRESENTATION - PART 20: BASIC CONVENTIONS FOR LINES
I.S. EN ISO 10472-1:2008 SAFETY REQUIREMENTS FOR INDUSTRIAL LAUNDRY MACHINERY - PART 1: COMMON REQUIREMENTS
DIN EN 15339-2:2007-06 Thermal spraying - Safety requirements for thermal spraying equipment - Part 2: Gas control units
EN 1804-3:2006+A1:2010 Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 3: Hydraulic control systems
I.S. EN 81-3:2000 SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PART 3: ELECTRIC AND HYDRAULIC SERVICE LIFTS
I.S. EN 81-2:1999 SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PART 2: HYDRAULIC LIFTS
ANSI B11 TR6 : 2010 MACHINES - SAFETY CONTROL SYSTEM FOR MACHINE TOOLS
ISO 4548-1:1997 Methods of test for full-flow lubricating oil filters for internal combustion engines — Part 1: Differential pressure/flow characteristics
DIN EN ISO 4413:2011-04 Hydraulic fluid power - General rules and safety requirements for systems and their components (ISO 4413:2010)
NF EN ISO 4414 : 2011 PNEUMATIC FLUID POWER - GENERAL RULES AND SAFETY REQUIREMENTS FOR SYSTEMS AND THEIR COMPONENTS
03/319909 DC : DRAFT NOV 2003 BS EN 14817 - RAILWAY APPLICATIONS - SUSPENSION COMPONENTS - AIR-SPRING CONTROL ELEMENTS
16/30330392 DC : 0 BS ISO 20401 - PNEUMATIC FLUID POWER SYSTEMS - DIRECTIONAL CONTROL VALVES - SPECIFICATION OF PIN ASSIGNMENT FOR ELECTRICAL ROUND CONNECTORS OF DIAMETERS 8 MM AND 12 MM
13/30271041 DC : 0 BS ISO 14085-5 - AEROSPACE SERIES - HYDRAULIC FILTER ELEMENTS - TEST METHODS - PART 5: RESISTANCE TO FLOW FATIGUE
17/30362085 DC : 0 BS ISO 14617 - GRAPHICAL SYMBOLS FOR DIAGRAMS
BS ISO 8643:2017 Earth-moving machinery. Hydraulic excavator and backhoe loader lowering control device. Requirements and tests
BS ISO 7789:2007 Hydraulic fluid power. Two-, three- and four-port screw-in cartridge valves. Cavities
13/30294749 DC : 0 BS ISO 19973-2 - PNEUMATIC FLUID POWER - ASSESSMENT OF COMPONENT RELIABILITY BY TESTING - PART 2: DIRECTIONAL CONTROL VALVES
I.S. EN 12840:2001 SAFETY OF MACHINE-TOOLS - MANUALLY CONTROLLED TURNING MACHINES WITH OR WITHOUT AUTOMATIC CONTROL
BS ISO 10770-2:2012 Hydraulic fluid power. Electrically modulated hydraulic control valves Test methods for three-port directional flow-control valves
BS ISO 19973-3:2015 Pneumatic fluid power. Assessment of component reliability by testing Cylinders with piston rod
BS ISO 4020:2001 Road vehicles. Fuel filters for diesel engines.Test methods
BS ISO 10094-2:2010 Pneumatic fluid power. Electro-pneumatic pressure control valves Test methods to determine main characteristics to include in the supplier\'s literature
14/30304019 DC : 0 BS ISO 5781 - HYDRAULIC FLUID POWER - PRESSURE-REDUCING VALVES, SEQUENCE VALVES, UNLOADING VALVES, THROTTLE VALVES AND CHECK VALVES - MOUNTING SURFACES
BS ISO 12500-3:2009 Filters for compressed air. Test methods Particulates
BS ISO 10041-2:2010 Pneumatic fluid power. Electro-pneumatic continuous flow control valves Test methods to determine main characteristics to include in the supplier\'s literature
UNI EN ISO 8230-1 : 2009 SAFETY REQUIREMENTS FOR DRY-CLEANING MACHINES - PART 1: COMMON SAFETY REQUIREMENTS
BS ISO 6263:2013 Hydraulic fluid power. Compensated flow-control valves. Mounting surfaces
16/30317112 DC : 0 BS ISO 3968 - HYDRAULIC FLUID POWER - FILTERS - EVALUATION OF DIFFERENTIAL PRESSURE VERSUS FLOW
FM 5580 : 2012 HYBRID (WATER AND INERT GAS) FIRE EXTINGUISHING SYSTEMS
BS ISO 5598:2008 Fluid power systems and components. Vocabulary
BS ISO 19973-4:2014 Pneumatic fluid power. Assessment of component reliability by testing Pressure regulators
15/30271100 DC : 0 BS ISO 16332 - DIESEL ENGINES - FUEL FILTERS - METHOD FOR EVALUATING FUEL/ WATER SEPARATION EFFICIENCY
04/30108990 DC : DRAFT FEB 2004 ISO 17567 - AGRICULTURE AND FORESTRY TRACTORS AND IMPLEMENTS - HYDRAULIC POWER BEYOND
BS ISO 4392-2:2002 Hydraulic fluid power. Determination of characteristics of motors Startability
97/711340 DC : DRAFT JUL 1997 ISO/CD 5598 - FLUID POWER SYSTEMS - TERMINOLOGY, CLASSIFICATION AND SYMBOLS
MIL-STD-40051-2 Revision C:2015 PREPARATION OF DIGITAL TECHNICAL INFORMATION FOR PAGE-BASED TECHNICAL MANUALS (TMS)
BS ISO 14085-2:2015 Aerospace series. Hydraulic filter elements. Test methods Conditioning
BS ISO 20401:2017 Pneumatic fluid power systems. Directional control valves. Specification of pin assignment for 8 mm and 12 mm diameter electrical round connectors
14/30292494 DC : 0 BS EN ISO 22476-15 - GEOTECHNICAL INVESTIGATION AND TESTING - FIELD TESTING - PART 15: MEASURING WHILE DRILLING
ISO 15407-2:2003 Pneumatic fluid power — Five-port directional control valves, sizes 18 mm and 26 mm — Part 2: Mounting interface surfaces with optional electrical connector
BS 7403-3:1998 Full-flow lubricating oil filters for internal combustion engines Methods of test for resistance to high differential pressure and to elevated temperature
BS ISO 3968:2017 Hydraulic fluid power. Filters. Evaluation of differential pressure versus flow
ISO 6358-1:2013 Pneumatic fluid power — Determination of flow-rate characteristics of components using compressible fluids — Part 1: General rules and test methods for steady-state flow
ISO 27407:2010 Hydraulic fluid power Marking of performance characteristics on hydraulic filters
BS ISO 1217 : 2009 DISPLACEMENT COMPRESSORS - ACCEPTANCE TESTS
ISO 4548-9:2008 Methods of test for full-flow lubricating oil filters for internal combustion engines — Part 9: Inlet and outlet anti-drain valve tests
I.S. EN 15339-2:2007 THERMAL SPRAYING - SAFETY REQUIREMENTS FOR THERMAL SPRAYING EQUIPMENT - PART 2: GAS CONTROL UNITS
ISO 6301-2:2006 Pneumatic fluid power Compressed-air lubricators Part 2: Test methods to determine the main characteristics to be included in supplier's literature
ISO 4548-12:2017 Methods of test for full-flow lubricating oil filters for internal combustion engines — Part 12: Filtration efficiency using particle counting and contaminant retention capacity
ISO 19973-4:2014 Pneumatic fluid power Assessment of component reliability by testing Part 4: Pressure regulators
EN ISO 6412-1:2018 Technical product documentation - Simplified representation of pipelines - Part 1: General rules and orthogonal representation (ISO 6412-1:2017)
UNI EN 81-31 : 2010 SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - LIFTS FOR THE TRANSPORT OF GOODS ONLY - PART 31: ACCESSIBLE GOODS ONLY LIFTS
UNE-EN ISO 23125:2015 Machine tools - Safety - Turning machines (ISO 23125:2015, Corrected version 2016-03-15)
ISO 5598:2008 Fluid power systems and components Vocabulary
BS ISO 18413:2015 Hydraulic fluid power. Cleanliness of components. Inspection document and principles related to contaminant extraction and analysis, and data reporting
ISO 10770-3:2007 Hydraulic fluid power Electrically modulated hydraulic control valves Part 3: Test methods for pressure control valves
ISO 19438:2003 Diesel fuel and petrol filters for internal combustion engines — Filtration efficiency using particle counting and contaminant retention capacity
ISO 4548-4:1997 Methods of test for full-flow lubricating oil filters for internal combustion engines Part 4: Initial particle retention efficiency, life and cumulative efficiency (gravimetric method)
ISO 6953-2:2015 Pneumatic fluid power — Compressed air pressure regulators and filter-regulators — Part 2: Test methods to determine the main characteristics to be included in literature from suppliers
ISO 12500-1:2007 Filters for compressed air Test methods Part 1: Oil aerosols
ISO 4392-2:2002 Hydraulic fluid power Determination of characteristics of motors Part 2: Startability
ISO 10767-3:1999 Hydraulic fluid power — Determination of pressure ripple levels generated in systems and components — Part 3: Method for motors
ISO 5781:2016 Hydraulic fluid power Pressure-reducing valves, sequence valves, unloading valves, throttle valves and check valves Mounting surfaces
ISO/TS 23556:2007 Performance test method for diesel engine soot-removal devices in lubricating oils Initial filtration efficiency
ISO 10770-1:2009 Hydraulic fluid power — Electrically modulated hydraulic control valves — Part 1: Test methods for four-port directional flow-control valves
DIN EN ISO 10472-1:2009-10 Safety requirements for industrial laundry machinery - Part 1: Common requirements (ISO 10472-1:1997)
DIN EN 13443-2:2007-10 WATER CONDITIONING EQUIPMENT INSIDE BUILDINGS - MECHANICAL FILTERS - PART 2: PARTICLE RATING 1 MUM TO LESS THAN 80 MUM - REQUIREMENTS FOR PERFORMANCE, SAFETY AND TESTING
BS EN ISO 9905 : 1998 TECHNICAL SPECIFICATIONS FOR CENTRIFUGAL PUMPS - CLASS 1
BS EN 14817:2006 Railway applications. Suspension components. Air-spring control elements
UNE-EN 81-2:2001 SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PART 2: HYDRAULIC LIFTS.
EN ISO 8230-1:2008 Safety requirements for dry-cleaning machines - Part 1: Common safety requirements (ISO 8230-1:2008)
EN 982:1996+A1:2008 Safety of machinery - Safety requirements for fluid power systems and their components - Hydraulics
UNI EN 81-3 : 2008 SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PART 3: ELECTRIC AND HYDRAULIC SERVICE LIFTS
UNI EN 81-2 : 2010 SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PART 2: HYDRAULIC LIFTS
UNI EN ISO 9905 : 2011 TECHNICAL SPECIFICATIONS FOR CENTRIFUGAL PUMPS - CLASS 1
UNI EN 983 : 2009 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR FLUID POWER SYSTEMS AND THEIR COMPONENTS - PNEUMATICS
UNI EN 982 : 2009 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR FLUID POWER SYSTEMS AND THEIR COMPONENTS - HYDRAULICS
UNI EN ISO 10472-1 : 2009 SAFETY REQUIREMENTS FOR INDUSTRIAL LAUNDRY MACHINERY - PART 1: COMMON REQUIREMENTS
ISO 6263:2013 Hydraulic fluid power — Compensated flow-control valves — Mounting surfaces
BS ISO 6358-1:2013 Pneumatic fluid power. Determination of flow-rate characteristics of components using compressible fluids General rules and test methods for steady-state flow
DIN EN ISO 11011:2015-08 COMPRESSED AIR - ENERGY EFFICIENCY - ASSESSMENT (ISO 11011:2013)
13/30294752 DC : 0 BS ISO 19973-3 - PNEUMATIC FLUID POWER - ASSESSMENT OF COMPONENT RELIABILITY BY TESTING - PART 3: CYLINDERS WITH PISTON ROD
BS ISO 14084-2:2015 Process diagrams for power plants Graphical symbols
13/30209314 DC : 0 BS ISO 14084-2 - PROCESS DIAGRAMS FOR POWER PLANTS - PART 2: GRAPHICAL SYMBOLS
I.S. EN ISO 5199:2002 TECHNICAL SPECIFICATIONS FOR CENTRIFUGAL PUMPS - CLASS 2
04/30022935 DC : DRAFT NOV 2004 BS ISO 12500-1 - FILTERS FOR COMPRESSED AIR - METHODS OF TEST - PART 1: OIL AEROSOILS
13/30271035 DC : 0 BS ISO 14085-3 - AEROSPACE SERIES - HYDRAULIC FILTER ELEMENTS - TEST METHODS - PART 3: FILTRATION EFFICIENCY AND RETENTION CAPACITY
13/30271032 DC : 0 BS ISO 14085-2 - AEROSPACE SERIES - HYDRAULIC FILTER ELEMENTS - TEST METHODS - PART 2: CONDITIONING
17/30325994 DC : 0 BS ISO 4409 - HYDRAULIC FLUID POWER - POSITIVE-DISPLACEMENT PUMPS, MOTORS AND INTEGRAL TRANSMISSIONS - METHODS OF TESTING AND PRESENTING BASIC STEADY STATE PERFORMANCE
BS ISO 8573-9:2004 Compressed air Test methods for liquid water content
05/30128814 DC : DRAFT NOV 2005 ISO 19973-4 - PNEUMATIC FLUID POWER - ASSESSMENT OF COMPONENT RELIABILITY BY TESTING - PART 4: PRESSURE REGULATORS
I.S. EN 12478:2000 SAFETY OF MACHINE TOOLS - LARGE NUMERICALLY CONTROLLED TURNING MACHINES AND TURNING CENTRES
BS ISO 2942:2004 Hydraulic fluid power. Filter elements. Verification of fabrication integrity and determination of the first bubble point
BS ISO 5782-1:2017 Pneumatic fluid power. Compressed air filters Main characteristics to be included in supplier\'s literature and product-marking requirements
BS ISO 12500-1:2007 Filters for compressed air. Test methods Oil aerosols
BS ISO 10770-1:2009 Hydraulic fluid power. Electrically modulated hydraulic control valves Test methods for four-port directional flow-control valves
BS ISO 12238:2001 Pneumatic fluid power. Directional control valves. Measurement of shifting time
BS ISO 13357-1:2017 Petroleum products. Determination of the filterability of lubricating oils Procedure for oils in the presence of water
BS ISO 6953-2:2015 Pneumatic fluid power. Compressed air pressure regulators and filter-regulators Test methods to determine the main characteristics to be included in literature from suppliers
00/704298 DC : DRAFT FEB 2000 ISO/CD 2941 - HYDRAULIC FLUID POWER - FILTER ELEMENTS - VERIFICATION OF COLLAPSE/BURST PRESSURE RATING
09/30196676 DC : DRAFT OCT 2009 BS ISO 1219-2 - FLUID POWER SYSTEMS AND COMPONENTS - GRAPHIC SYMBOLS AND CIRCUIT DIAGRAMS - PART 2: CIRCUIT DIAGRAMS
15/30316146 DC : 0 BS ISO 13357-1 - PETROLEUM PRODUCTS - DETERMINATION OF THE FILTERABILITY OF LUBRICATING OILS - PART 1: PROCEDURE FOR OILS IN THE PRESENCE OF WATER
DIN ISO 13357-1:2009-04 PETROLEUM PRODUCTS - DETERMINATION OF THE FILTERABILITY OF LUBRICATING OILS - PART 1: PROCEDURE FOR OILS IN THE PRESENCE OF WATER
11/30240403 DC : 0 BS ISO 10770-2 - HYDRAULIC FLUID POWER - ELECTRICALLY MODULATED HYDRAULIC CONTROL VALVES - PART 2: TEST METHODS FOR THREE-WAY DIRECTIONAL FLOW CONTROL VALVES
02/710642 DC : DRAFT SEP 2002 BS ISO 2942 - HYDRAULIC FLUID POWER - FILTER ELEMENTS - VERIFICATION OF FABRICATION INTEGRITY AND DETERMINATION OF THE FIRST BUBBLE POINT
ISO 4548-3:1997 Methods of test for full-flow lubricating oil filters for internal combustion engines — Part 3: Resistance to high differential pressure and to elevated temperature
02/707919 DC : DRAFT JUN 2002 BS ISO 8573-8 - COMPRESSED AIR - PART 8: TEST METHODS FOR SOLID PARTICLE CONTENT BY MASS CONCENTRATION
09/30196686 DC : 0 BS ISO 10094-2 - PNEUMATIC FLUID POWER - ELECTRICALLY MODULATED PNEUMATIC PRESSURE CONTROL VALVES - PART 2: TEST METHODS TO DETERMINE MAIN CHARACTERISTICS TO INCLUDE IN THE SUPPLIER'S LITERATURE
02/708160 DC : DRAFT JUN 2002 BS ISO 8573-9 - COMPRESSED AIR - PART 9: TEST METHODS FOR LIQUID WATER CONTENT
DIN EN ISO 11011 E : 2015 COMPRESSED AIR - ENERGY EFFICIENCY - ASSESSMENT (ISO 11011:2013)
BS ISO 6264:1998 Hydraulic fluid power. Pressure-relief valves. Mounting surfaces
BS ISO 8573-6:2003 Compressed air Test methods for gaseous contaminant content
16/30316730 DC : 0 BS ISO 4548-12 - METHODS OF TEST FOR FULL-FLOW LUBRICATING OIL FILTERS FOR INTERNAL COMBUSTION ENGINES - PART 12: FILTRATION EFFICIENCY USING PARTICLE COUNTING, AND CONTAMINANT RETENTION CAPACITY
07/30164305 DC : 0 BS ISO 12500-3 - FILTERS FOR COMPRESSED AIR - TEST METHODS - PART 3: PARTICULATES
BS EN ISO 23125:2015 Machine tools. Safety. Turning machines
BS ISO 4413:1998 Hydraulic fluid power. General rules relating to systems
ISO 11943:1999 Hydraulic fluid power On-line automatic particle-counting systems for liquids Methods of calibration and validation
ISO 8573-9:2004 Compressed air — Part 9: Test methods for liquid water content
NF ISO 10770-1 : 2009 HYDRAULIC FLUID POWER - ELECTRICALLY MODULATED HYDRAULIC CONTROL VALVES - PART 1: TEST METHODS FOR FOUR-PORT DIRECTIONAL FLOW-CONTROL VALVES
NF EN 81-31 : 2011 SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - LIFTS FOR THE TRANSPORT OF GOODS ONLY - PART 31: ACCESSIBLE GOODS ONLY LIFTS
DIN EN 81-31:2010-08 Safety rules for the construction and installation of lifts - Lifts for the transport of goods only - Part 31: Accessible goods only lifts
07/30163925 DC : 0 BS ISO 4411 - HYDRAULIC FLUID POWER - VALVES - DETERMINATION OF PRESSURE DIFFERENTIAL/FLOW CHARACTERISTICS
NF ISO 10041-2 : 2010 PNEUMATIC FLUID POWER - ELECTRO-PNEUMATIC CONTINUOUS FLOW CONTROL VALVES - PART 2: TEST METHODS TO DETERMINE MAIN CHARACTERISTICS TO INCLUDE IN THE SUPPLIER'S LITERATURE
UNI ISO 4411 : 2012 HYDRAULIC FLUID POWER - VALVES - DETERMINATION OF PRESSURE DIFFERENTIAL/FLOW CHARACTERISTICS
DIN EN ISO 8230-1:2009-05 SAFETY REQUIREMENTS FOR DRY-CLEANING MACHINES - PART 1: COMMON SAFETY REQUIREMENTS
ISO 10637:1999 Dental equipment High- and medium-volume suction systems
BS ISO 1219-3:2016 Fluid power systems and components. Graphical symbols and circuit diagrams Symbol modules and connected symbols in circuit diagrams
ISO 12500-3:2009 Filters for compressed air Test methods Part 3: Particulates
ISO 5599-2:2001 Pneumatic fluid power — Five-port directional control valves — Part 2: Mounting interface surfaces with optional electrical connector
ISO 19973-3:2015 Pneumatic fluid power Assessment of component reliability by testing Part 3: Cylinders with piston rod
ISO 8426:2008 Hydraulic fluid power Positive displacement pumps and motors Determination of derived capacity
S.R. CWA 16221:2010 VEHICLE SECURITY BARRIERS - PERFORMANCE REQUIREMENTS, TEST METHODS AND GUIDANCE ON APPLICATION
ISO 2941:2009 Hydraulic fluid power Filter elements Verification of collapse/burst pressure rating
I.S. EN ISO 11011:2015 COMPRESSED AIR - ENERGY EFFICIENCY - ASSESSMENT (ISO 11011:2013)
BS ISO 4409:2007 Hydraulic fluid power. Positive-displacement pumps, motors and integral transmissions. Methods of testing and presenting basic steady state performance
SAE J 2312 : 2013 AUTOMATIC TRANSMISSION INTAKE FILTER TEST PROCEDURE
ISO 6412-1:2017 Technical product documentation — Simplified representation of pipelines — Part 1: General rules and orthogonal representation
ISO 4392-1:2002 Hydraulic fluid power — Determination of characteristics of motors — Part 1: At constant low speed and constant pressure
ISO 17559:2003 Hydraulic fluid power — Electrically controlled hydraulic pumps — Test methods to determine performance characteristics
ISO 13357-1:2017 Petroleum products — Determination of the filterability of lubricating oils — Part 1: Procedure for oils in the presence of water
ISO 19973-2:2015 Pneumatic fluid power Assessment of component reliability by testing Part 2: Directional control valves
ISO 19973-5:2015 Pneumatic fluid power Assessment of component reliability by testing Part 5: Non-return valves, shuttle valves, dual pressure valves (AND function), one-way adjustable flow control valves, quick-exhaust valves
ISO 4548-2:1997 Methods of test for full-flow lubricating oil filters for internal combustion engines — Part 2: Element by-pass valve characteristics
ISO 23181:2007 Hydraulic fluid power — Filter elements — Determination of resistance to flow fatigue using high viscosity fluid
ISO 10041-2:2010 Pneumatic fluid power Electro-pneumatic continuous flow control valves Part 2: Test methods to determine main characteristics to include in the supplier's literature
I.S. EN 81-31:2010 SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - LIFTS FOR THE TRANSPORT OF GOODS ONLY - PART 31: ACCESSIBLE GOODS ONLY LIFTS
ISO 14085-5:2015 Aerospace series Hydraulic filter elements Test methods Part 5: Resistance to flow fatigue
ISO 4411:2008 Hydraulic fluid power Valves Determination of pressure differential/flow characteristics
DIN EN 14817 E : 2006 RAILWAY APPLICATIONS - SUSPENSION COMPONENTS - AIR SPRING CONTROL ELEMENTS
DIN EN 14652 E : 2007 WATER CONDITIONING EQUIPMENT INSIDE BUILDINGS - MEMBRANE SEPARATION DEVICES - REQUIREMENTS FOR PERFORMANCE, SAFETY AND TESTING
ISO 8230-1:2008 Safety requirements for dry-cleaning machines Part 1: Common safety requirements
14/30302919 DC : 0 PD CEN/TR 81-12 - SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - BASICS AND INTERPRETATIONS - PART 12: USE OF EN 81-20 AND EN 81-50 IN SPECIFIC MARKETS
BS EN ISO 128-20:2001 Technical drawings. General principles of presentation Basic conventions for lines
BS EN 1804-3 : 2006 MACHINES FOR UNDERGROUND MINES - SAFETY REQUIREMENTS FOR HYDRAULIC POWERED ROOF SUPPORTS - PART 3: HYDRAULIC CONTROL SYSTEMS
ISO 10767-2:1999 Hydraulic fluid power Determination of pressure ripple levels generated in systems and components Part 2: Simplified method for pumps
BS EN 12840:2001 Safety of machine tools. Manually controlled turning machines with or without automatic control
ISO 8230:1997 Safety requirements for dry-cleaning machines using perchloroethylene
ONORM EN 81-20 : 2015 SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 20: PASSENGER AND GOODS PASSENGER LIFTS
BS EN 982 : 1996 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR FLUID POWER SYSTEMS AND THEIR COMPONENTS - HYDRAULICS
BS EN 15339-2:2007 Thermal spraying. Safety requirements for thermal spraying equipment Gas control units
BS EN 81-2 : 1998 SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PART 2: HYDRAULIC LIFTS
BS EN 14652 : 2005 WATER CONDITIONING EQUIPMENT INSIDE BUILDINGS - MEMBRANE SEPARATION DEVICES - REQUIREMENTS FOR PERFORMANCE, SAFETY AND TESTING
ISO 11011:2013 Compressed air — Energy efficiency — Assessment
ISO 23125:2015 Machine tools Safety Turning machines
ISO 4413:2010 Hydraulic fluid power General rules and safety requirements for systems and their components
ISO 5199:2002 Technical specifications for centrifugal pumps — Class II
BS EN 983 : 1996 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR FLUID POWER SYSTEMS AND THEIR COMPONENTS - PNEUMATICS
BS EN 81-20:2014 Safety rules for the construction and installation of lifts. Lifts for the transport of persons and goods Passenger and goods passenger lifts
BS EN 12415:2001 Safety of machine tools. Small numerically controlled turning machines and turning centres
ISO 9905:1994 Technical specifications for centrifugal pumps — Class I
BS ISO 10767-2:1999 Hydraulic fluid power. Determination of pressure ripple levels generated in systems and components Simplified method for pumps
BS ISO 3724:2007 Hydraulic fluid power. Filter elements. Determination of resistance to flow fatigue using particulate contaminant
EN 14817:2006 Railway applications - Suspension components - Air spring control elements
EN 81-3:2000+A1:2008/AC:2009 SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PART 3: ELECTRIC AND HYDRAULIC SERVICE LIFTS
EN 14652:2005+A1:2007 Water conditioning equipment inside buildings - Membrane separation devices - Requirements for performance, safety and testing
EN 81-31:2010 Safety rules for the construction and installation of lifts - Lifts for the transport of goods only - Part 31: Accessible goods only lifts
EN ISO 9905:1997/A1:2011 Technical specifications for centrifugal pumps - Class I - Amendment 1 (ISO 9905:1994/AMD 1:2011)
EN 81-2 : 1998 + A3 2009 SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PART 2: HYDRAULIC LIFTS
EN ISO 10472-1:2008 Safety requirements for industrial laundry machinery - Part 1: Common requirements (ISO 10472-1:1997)
EN ISO 5199 : 2002 TECHNICAL SPECIFICATIONS FOR CENTRIFUGAL PUMPS - CLASS 2
EN ISO 128-20:2001 Technical drawings - General principles of presentation - Part 20: Basic conventions for lines (ISO 128-20:1996)
EN ISO 4414:2010 Pneumatic fluid power - General rules and safety requirements for systems and their components (ISO 4414:2010)
EN ISO 8230 : 1997 SAFETY REQUIREMENTS FOR DRY-CLEANING MACHINES USING PERCHLOROETHYLENE
EN ISO 11011:2015 Compressed air - Energy efficiency - Assessment (ISO 11011:2013)
EN ISO 4413:2010 Hydraulic fluid power - General rules and safety requirements for systems and their components (ISO 4413:2010)
EN 983:1996+A1:2008 Safety of machinery - Safety requirements for fluid power systems and their components - Pneumatics
BS ISO 5781:2000 Hydraulic fluid power. Pressure reducing valves, sequence valves, unloading valves, throttle valves and check valves. Mounting surfaces
15/30321906 DC : 0 BS ISO 11943 - HYDRAULIC FLUID POWER - ON-LINE AUTOMATIC PARTICLE-COUNTING SYSTEMS FOR LIQUIDS - METHODS OF CALIBRATION AND VALIDATION
BS ISO 6953-3:2013 Pneumatic fluid power. Compressed air pressure regulators and filter-regulators Alternative test methods for measuring the flow-rate characteristics of pressure regulators
15/30316149 DC : 0 BS ISO 13357-2 - PETROLEUM PRODUCTS - DETERMINATION OF THE FILTERABILITY OF LUBRICATING OILS - PART 2: PROCEDURE FOR DRY OIL
BS ISO 4548-14:2016 Methods of test for full-flow lubricating oil filters for internal combustion engines Cold start simulation and hydraulic pulse durability for composite filter housings
05/30125044 DC : DRAFT JAN 2005 ISO 19973-2 - PNEUMATIC FLUID POWER - DETERMINATION OF RELIABILITY BY TESTING - PART 2: VALVES
BS ISO 4411:2008 Hydraulic fluid power. Valves. Determination of pressure differential/flow characteristics
BS ISO 18237:2017 Hydraulic fluid power. Method for evaluating water separation performance of dehydrators
ISO 12238:2001 Pneumatic fluid power — Directional control valves — Measurement of shifting time
NFPA T3.5.14 : 2009 : R2014 HYDRAULIC FLUID POWER - DIRECTIONAL CONTROL VALVE - METHOD FOR DETERMINING THE METERING CHARACTERISTICS
I.S. EN ISO 8230:1998 SAFETY REQUIREMENTS FOR DRY-CLEANING MACHINES USING PERCHLOROETHYLENE
BS ISO 14617-1:2002 Graphical symbols for diagrams General information and indexes
MIL-STD-40051-1 Revision C:2015 PREPARATION OF DIGITAL TECHNICAL INFORMATION FOR INTERACTIVE ELECTRONIC TECHNICAL MANUALS (IETMS)
BS ISO 17567:2005 Agriculture and forestry tractors and implements. Hydraulic power beyond
BS ISO 4548-12:2017 Methods of test for full-flow lubricating oil filters for internal combustion engines Filtration efficiency using particle counting and contaminant retention capacity
BIS IS 11509-1 : 2012 METHODS OF TEST FOR FULL-FLOW LUBRICATING OIL FILTERS FOR INTERNAL COMBUSTION ENGINES - PART 1: DIFFERENTIAL PRESSURE/FLOW CHARACTERISTICS
06/30128779 DC : DRAFT AUG 2006 ISO 8426 - HYDRAULIC FLUID POWER. POSITIVE DISPLACEMENT PUMPS AND MOTORS - DETERMINATION OF DERIVED CAPACITY
ISO 14084-2:2015 Process diagrams for power plants Part 2: Graphical symbols
BS ISO 12500-2:2007 Filters for compressed air. Test methods Oil vapours
05/30111949 DC : DRAFT JUL 2005 ISO 4409 - HYDRAULIC FLUID POWER - POSITIVE DISPLACEMENT PUMPS, MOTORS AND INTEGRAL TRANSMISSIONS - METHODS OF TESTING AND PRESENTING BASIC STEADY STATE PERFORMANCE
BS ISO 11943:1999 Hydraulic fluid power. On-line automatic particle-counting systems for liquids. Methods of calibration and validation
16/30268528 DC : 0 BS ISO 18237 - HYDRAULIC FLUID POWER - METHOD FOR EVALUATING WATER SEPARATION PERFORMANCE OF DEHYDRATORS
BS EN ISO 4413:2010 Hydraulic fluid power. General rules and safety requirements for systems and their components
BS ISO 4414:1998 Pneumatic fluid power. General rules relating to systems
DIN ISO 13357-2:2008-09 PETROLEUM PRODUCTS - DETERMINATION OF THE FILTERABILITY OF LUBRICATING OILS - PART 2: PROCEDURE FOR DRY OILS
BS ISO 19973-5:2015 Pneumatic fluid power. Assessment of component reliability by testing Non-return valves, shuttle valves, dual pressure valves (AND function), one-way adjustable flow control valves, quick-exhaust valves
98/717481 DC : DRAFT DEC 1998 ISO/CD 16009 - HYDRAULIC FLUID POWER - FILTER - METHOD FOR DETERMINING FILTRATION PERFORMANCE OF AN OFF-LINE ELEMENT
BIS IS 13534 : 2013 HYDRAULIC FLUID POWER - VALVES - DETERMINATION OF PRESSURE DIFFERENTIAL/FLOW CHARACTERISTICS
ISO 6953-3:2012 Pneumatic fluid power — Compressed air pressure regulators and filter-regulators — Part 3: Alternative test methods for measuring the flow-rate characteristics of pressure regulators
ISO 15086-2:2000 Hydraulic fluid power — Determination of the fluid-borne noise characteristics of components and systems — Part 2: Measurement of the speed of sound in a fluid in a pipe
BS ISO 5599-1:2001 Pneumatic fluid power. Five-port directional control valves Mounting interface surfaces without electrical connector
DD ISO/TS 23556:2007 Performance test method for diesel engine soot-removal devices in lubricating oils. Initial filtration efficiency
08/30176290 DC : DRAFT JAN 2008 BS ISO 6358-4 - PNEUMATIC FLUID POWER - DETERMINATION OF FLOW-RATE CHARACTERISTICS OF COMPONENTS USING COMPRESSIBLE FLUIDS - PART 4: CHARGE TEST AS AN ALTERNATE TEST METHOD
BS ISO 23181:2007 Hydraulic fluid power. Filter elements. Determination of resistance to flow fatigue using high viscosity fluid
ISO 8643:2017 Earth-moving machinery — Hydraulic excavator and backhoe loader lowering control device — Requirements and tests
ISO 14085-2:2015 Aerospace series Hydraulic filter elements Test methods Part 2: Conditioning
06/30128759 DC : 0 BS ISO 15086-3 - HYDRAULIC FLUID POWER - DETERMINATION OF THE FLUID-BORNE NOISE CHARACTERISTICS OF COMPONENTS AND SYSTEMS - PART 3: MEASUREMENT OF HYDRAULIC IMPEDANCE
08/30171024 DC : DRAFT MAY 2008 BS ISO 10770-1 - HYDRAULIC FLUID POWER - ELECTRICALLY MODULATED HYDRAULIC CONTROL VALVES - PART 1: TEST METHODS FOR FOUR-WAY DIRECTIONAL FLOW CONTROL VALVES
04/30115437 DC : 0 ISO 5598 - FLUID POWER SYSTEMS AND COMPONENTS - VOCABULARY
DIN ISO 20401:2007-07 Pneumatic fluid power systems - Directional control valves - Specification of pin assignment for electrical round connectors of diameters 8 mm and 12 mm (ISO 20401:2005 + Cor. 1:2005)
NF EN ISO 4413 : 2011 HYDRAULIC FLUID POWER - GENERAL RULES AND SAFETY REQUIREMENTS FOR SYSTEMS AND THEIR COMPONENTS
ISO 14085-3:2015 Aerospace series Hydraulic filter elements Test methods Part 3: Filtration efficiency and retention capacity
ISO 12500-4:2009 Filters for compressed air Methods of test Part 4: Water
I.S. EN 81-20:2014 SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 20: PASSENGER AND GOODS PASSENGER LIFTS
ISO 17567:2005 Agricultural and forestry tractors and implements Hydraulic power beyond
ISO 16332:2018 Diesel engines — Fuel filters — Method for evaluating fuel/water separation efficiency
NFPA T3.5.14 : 2009 HYDRAULIC FLUID POWER - DIRECTIONAL CONTROL VALVE - METHOD FOR DETERMINING THE METERING CHARACTERISTICS
ISO 4548-15:2014 Methods of test for full-flow lubricating oil filters for internal combustion engines Part 15: Vibration fatigue test for composite filter housings
ISO 5599-1:2001 Pneumatic fluid power — Five-port directional control valves — Part 1: Mounting interface surfaces without electrical connector
I.S. EN ISO 23125:2015 MACHINE TOOLS - SAFETY - TURNING MACHINES (ISO 23125:2015)
ISO 5782-1:2017 Pneumatic fluid power — Compressed air filters — Part 1: Main characteristics to be included in supplier's literature and product-marking requirements
ISO 18413:2015 Hydraulic fluid power Cleanliness of components Inspection document and principles related to contaminant extraction and analysis, and data reporting
ISO 10094-2:2010 Pneumatic fluid power Electro-pneumatic pressure control valves Part 2: Test methods to determine main characteristics to include in the supplier's literature
ISO 8573-6:2003 Compressed air — Part 6: Test methods for gaseous contaminant content
ISO 14085-4:2015 Aerospace series Hydraulic filter elements Test methods Part 4: Verification of collapse/burst pressure rating
DIN EN ISO 128-20 E : 2002 TECHNICAL DRAWINGS - GENERAL PRINCIPLES OF PRESENTATION - PART 20: BASIC CONVENTIONS FOR LINES
DIN EN 81-3:2011-06 Safety rules for the construction und installation of lifts - Part 3: Electric and hydraulic service lifts (includes Amendment A1:2008 + Corrigendum AC:2009)
ISO 17082:2004 Pneumatic fluid power — Valves — Data to be included in supplier literature
ISO 128-20:1996 Technical drawings General principles of presentation Part 20: Basic conventions for lines
BS EN 81-3 : 2003 SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PART 3: ELECTRIC AND HYDRAULIC SERVICE LIFTS
PD ISO/TR 18569:2004 Safety of machinery. Guidelines for the understanding and use of safety of machinery standards.
BS EN ISO 5199:2002 Technical specifications for centrifugal pumps. Class II
ISO 3724:2007 Hydraulic fluid power — Filter elements — Determination of resistance to flow fatigue using particulate contaminant
DIN EN 14817:2006-08 Railway applications - Suspension components - Air spring control elements
EN 12415:2000/A1:2002 SAFETY OF MACHINE TOOLS - SMALL NUMERICALLY CONTROLLED TURNING MACHINES AND TURNING CENTRES
DIN EN 14652:2007-09 WATER CONDITIONING EQUIPMENT INSIDE BUILDINGS - MEMBRANE SEPARATION DEVICES - REQUIREMENTS FOR PERFORMANCE, SAFETY AND TESTING
DIN EN ISO 5199:2003-12 TECHNICAL SPECIFICATIONS FOR CENTRIFUGAL PUMPS - CLASS 2
EN 12840 : 2001 SAFETY OF MACHINE-TOOLS - MANUALLY CONTROLLED TURNING MACHINES WITH OR WITHOUT AUTOMATIC CONTROL
DIN EN 983:1996-09 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR FLUID POWER SYSTEMS AND THEIR COMPONENTS - PNEUMATICS
DIN EN 81-20:2014-11 SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 20: PASSENGER AND GOODS PASSENGER LIFTS
DIN EN 983:2009-06 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR FLUID POWER SYSTEMS AND THEIR COMPONENTS - PNEUMATICS
DIN EN 81-2:2010-08 SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PART 2: HYDRAULIC LIFTS
UNE-EN 1804-3:2007 Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 3: Hydraulic control systems

ISO 3511-3:1984 Process measurement control functions and instrumentation — Symbolic representation — Part 3: Detailed symbols for instrument interconnection diagrams
ISO 9461:1992 Hydraulic fluid power — Identification of valve ports, subplates, control devices and solenoids
ISO 5598:2008 Fluid power systems and components Vocabulary
ISO 3098-5:1997 Technical product documentation Lettering Part 5: CAD lettering of the Latin alphabet, numerals and marks
ISO 1219-2:2012 Fluid power systems and components — Graphical symbols and circuit diagrams — Part 2: Circuit diagrams
ISO 81714-1:2010 Design of graphical symbols for use in the technical documentation of products Part 1: Basic rules
ISO 11727:1999 Pneumatic fluid power Identification of ports and control mechanisms of control valves and other components
ISO 3511-2:1984 Process measurement control functions and instrumentation — Symbolic representation — Part 2: Extension of basic requirements
IEC 81714-2:2006 Design of graphical symbols for use in the technical documentation of products - Part 2: Specification for graphical symbols in a computer sensible form, including graphical symbols for a reference library, and requirements for their interchange

View more information
$407.06
Including GST where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Need help?
Call us on 131 242, then click here to start a Screen Sharing session
so we can help right away! Learn more