ISO 14284:1996
Withdrawn
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
View Superseded by
withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
Steel and iron — Sampling and preparation of samples for the determination of chemical composition
Available format(s)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
Withdrawn date
25-10-2022
Language(s)
English, French
Published date
27-06-1996
Gives methods for the determination of the chemical composition of pig iron, cast iron and steel. Methods are specified for use with both liquid and solid metal. Replaces ISO 377-2:1989.
| DevelopmentNote |
Supersedes ISO 377-2 (04/2001)
|
| DocumentType |
Standard
|
| Pages |
30
|
| PublisherName |
International Organization for Standardization
|
| Status |
Withdrawn
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| ONORM EN ISO 14284 : 2003 | Identical |
| DS EN ISO 14284 : 2002 | Identical |
| UNE-EN ISO 14284:2008 | Identical |
| GOST R ISO 14284 : 2009 | Identical |
| NF EN ISO 14284 : 2002 | Identical |
| NBN EN 10277-1 : 2008 | Identical |
| NBN EN ISO 14284 : 2003 | Identical |
| NEN EN ISO 14284 : 2002 | Identical |
| NS EN ISO 14284 : 1ED 2002 | Identical |
| I.S. EN ISO 14284:2002 | Identical |
| PN ISO 14284 : 1998 | Identical |
| PN EN ISO 14284 : 2003 | Identical |
| SN EN ISO 14284 : 2002 | Identical |
| UNI EN ISO 14284 : 2004 | Identical |
| SS-EN ISO 14284:2002 | Identical |
| BIS IS/ISO 14284 : 1996 | Identical |
| BS EN ISO 14284:2002 | Identical |
| EN ISO 14284:2002 | Identical |
| JIS G 0417:1999 | Identical |
| UNE-EN ISO 14284:2002 | Identical |
| DIN EN ISO 14284:2003-02 | Identical |
| ISO 17053:2005 | Steel and iron Determination of oxygen Infrared method after fusion under inert gas |
| DIN EN ISO 4829-2:2016-08 | STEELS - DETERMINATION OF TOTAL SILICON CONTENTS - REDUCED MOLYBDOSILICATE SPECTROPHOTOMETRIC METHOD - PART 2: SILICON CONTENTS BETWEEN 0,01 % AND 0,05 % (ISO 4829-2:2016) |
| DIN EN 10315:2006-10 | Routine method for analysis of high alloy steel by X-ray Fluorescence Spectrometry (XRF) by using a near by technique |
| UNE-EN 10088-5:2010 | Stainless steels - Part 5: Technical delivery conditions for bars, rods, wire, sections and bright products of corrosion resisting steels for construction purposes |
| UNE-EN 10343:2010 | Steels for quenching and tempering for construction purposes - Technical delivery conditions |
| 99/709740 DC : DRAFT JUN 99 | PREN 10253-2 - BUTT WELDING PIPE FITTINGS - PART 2: WROUGHT CARBON AND FERRITIC ALLOY STEELS WITH SPECIFIC INSPECTION REQUIREMENTS |
| I.S. EN 10208-2:2009 | STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 2: PIPES OF REQUIREMENT CLASS B |
| 08/30180856 DC : DRAFT JUNE 2008 | BS EN 10270-3 - STEEL WIRE FOR MECHANICAL SPRINGS - PART 3: STAINLESS SPRING STEEL WIRE |
| 02/704957 DC : DRAFT NOV 2002 | ISO 683-14 - HEAT-TREATABLE STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 14: HOT-ROLLED STEELS FOR QUENCHED AND TEMPERED SPRINGS |
| DIN EN 10338:2015-10 | Hot rolled and cold rolled non-coated products of multiphase steels for cold forming - Technical delivery conditions |
| ISO 404:2013 | Steel and steel products — General technical delivery requirements |
| 15/30287641 DC : 0 | BS EN ISO 16120-1 - NON-ALLOY STEEL WIRE ROD FOR CONVERSION TO WIRE - PART 1: GENERAL REQUIREMENTS |
| BS EN 10351:2011 | Chemical analysis of ferrous materials. Inductively coupled plasma optical emission spectrometric analysis of unalloyed and low alloyed steels. Determination of Mn, P, Cu, Ni, Cr, Mo, V, Co, Al (total) and Sn [Routine method] |
| 12/30250149 DC : 0 | BS ISO 16143-2 - STAINLESS STEELS FOR GENERAL PURPOSES - PART 2: SEMI-FINISHED PRODUCTS, BARS, RODS AND SECTIONS |
| 17/30346738 DC : 0 | BS EN 10225-2 - WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS - PART 2: SECTIONS |
| I.S. EN 10292:2007 | CONTINUOUSLY HOT-DIP COATED STRIP AND SHEET OF STEELS WITH HIGHER YIELD STRENGTH FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| PREN 10207 : DRAFT 2015 | STEELS FOR SIMPLE PRESSURE VESSELS - TECHNICAL DELIVERY REQUIREMENTS FOR PLATES, STRIPS AND BARS |
| 17/30337413 DC : 0 | BS EN ISO 4957 - TOOL STEELS |
| BS ISO 4939:2016 | Steel. Determination of nickel. Dimethylglyoxime spectrophotometric method |
| BS EN ISO 4946:2016 | Steel and cast iron. Determination of copper. 2,2\'-Biquinoline spectrophotometric method |
| API 5L REDLINE : 2007 | SPECIFICATION FOR LINE PIPE |
| I.S. EN ISO 4829-2:2016 | STEELS - DETERMINATION OF TOTAL SILICON CONTENTS - REDUCED MOLYBDOSILICATE SPECTROPHOTOMETRIC METHOD - PART 2: SILICON CONTENTS BETWEEN 0,01% AND 0,05% (ISO 4829-2:2016) |
| API 5CRA : 2010 : INC : ERR 1 : 2011 | SPECIFICATION FOR CORROSION-RESISTANT ALLOY SEAMLESS TUBES FOR USE AS CASING, TUBING AND COUPLING STOCK |
| BS 6200-3.40.3:1997 | Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Multi-element methods Determination of nickel, copper and cobalt contents by inductively coupled plasma atomic emission spectrometric method. Determination of copper content |
| 09/30196508 DC : 0 | BS ISO 9328-1 - STEEL FLAT PRODUCTS FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 1: GENERAL REQUIREMENTS |
| NF EN ISO 15351 : 2010 | STEEL AND IRON - DETERMINATION OF NITROGEN CONTENT - THERMAL CONDUCTIMETRIC METHOD AFTER FUSION IN A CURRENT OF INERT GAS (ROUTINE METHOD) |
| 13/30276363 DC : 0 | BS ISO 4942 - STEEL AND IRON - DETERMINATION OF VANADIUM CONTENT - N-BPHA SPECTROPHOTOMETRIC METHOD |
| BS EN ISO 4829-2:2016 | Steels. Determination of total silicon contents. Reduced molybdosilicate spectrophotometric method Silicon contents between 0,01 % and 0,05 % |
| 16/30332611 DC : DRAFT JAN 2016 | BS EN 10219-1 - COLD FORMED WELDED STRUCTURAL STEEL HOLLOW SECTIONS - PART 1: GENERAL |
| 13/30247437 DC : 0 | BS EN ISO 683-17 - HEAT-TREATED STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 17: BALL AND ROLLER BEARING STEELS (ISO/DIS 683-17:2013) |
| 08/30190326 DC : DRAFT DEC 2008 | BS EN 10225 - WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS |
| ISO 683-3:2016 | Heat-treatable steels, alloy steels and free-cutting steels Part 3: Case-hardening steels |
| 13/30279057 DC : 0 | BS ISO 683-4 - HEAT-TREATABLE STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 4: FREE-CUTTING STEELS |
| EN 10085:2001 | Nitriding steels - Technical delivery conditions |
| ISO 6935-1:2007 | Steel for the reinforcement of concrete Part 1: Plain bars |
| 14/30196840 DC : 0 | BS ISO 19272 - LOW ALLOYED STEEL - DETERMINATION OF TEN ELEMENTS - GLOW DISCHARGE OPTICAL EMISSION SPECTROMETRY (ROUTINE METHOD) |
| 12/30258463 DC : 0 | BS EN 16451 - RAILWAY APPLICATIONS - BRAKING - BRAKE PAD HOLDER |
| 11/30254168 DC : 0 | BS EN 10088-3 - STAINLESS STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR SEMI-FINISHED PRODUCTS, BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
| ISO 10799:2001 | Structural steels Cold-formed, welded, structural hollow sections Technical delivery requirements |
| DD ISO/TS 13899-3:2005 | Steel. Determination of Mo, Nb and W contents in alloyed steel. Inductively coupled plasma atomic emission spectrometric method Determination of W content |
| 16/30302555 DC : 0 | BS ISO 16962 - SURFACE CHEMICAL ANALYSIS - ANALYSIS OF ZINC- AND/OR ALUMINIUM-BASED METALLIC COATINGS BY GLOW-DISCHARGE OPTICAL-EMISSION SPECTROMETRY |
| 11/30191086 DC : 0 | BS ISO 12633-1 - HOT-FINISHED STRUCTURAL HOLLOW SECTIONS OF NON-ALLOY AND FINE GRAIN STEELS - PART 1: TECHNICAL DELIVERY CONDITIONS |
| 12/30258615 DC : 0 | BS ISO 10384 - HOT-ROLLED CARBON STEEL SHEET AS DEFINED BY CHEMICAL COMPOSITION |
| BS EN 10315:2006 | Routine method for analysis of high alloy steel by X-ray fluorescence spectrometry (XRF) by using a near by technique |
| BS ISO 15350 : 2001 | DETERMINATION OF TOTAL CARBON AND SULFUR CONTENT - INFRARED ABSORPTION METHOD AFTER COMBUSTION IN AN INDUCTION FURNACES (ROUTINE METHOD) |
| BS ISO 17058:2004 | Steel and iron. Determination of arsenic content. Spectrophotometric method |
| BS EN 10343:2009 | Steels for quenching and tempering for construction purposes. Technical delivery conditions |
| 15/30316161 DC : 0 | BS ISO 6931-1 - STAINLESS STEELS FOR SPRINGS - PART 1: WIRE |
| BS 6200-3.11.3:1997 | Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Determination of cobalt Flame atomic absorption spectrometric method |
| 17/30312516 DC : 0 | BS EN ISO 4945 - STEEL - DETERMINATION OF NITROGEN - SPECTROPHOTOMETRIC METHOD |
| 13/30256266 DC : 0 | BS ISO 683-18 - HEAT-TREATABLE STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 18: BRIGHT STEEL PRODUCTS |
| 04/30116142 DC : DRAFT JUL 2004 | ISO 4952 - STRUCTURAL STEELS WITH IMPROVED ATMOSPHERIC CORROSION RESISTANCE |
| PREN 10225-4 : DRAFT 2017 | WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS - PART 4: COLD FORMED WELDED HOLLOW SECTIONS |
| 04/30069217 DC : DRAFT FEB 2004 | ISO 16143-3 - STAINLESS STEELS FOR GENERAL PURPOSES - PART 3: WIRE |
| 06/30159843 DC : 0 | BS ISO 13680 - PETROLEUM AND NATURAL GAS INDUSTRIES - CORROSION - RESISTANT ALLOY SEAMLESS TUBES FOR USE AS CASING, TUBING AND COUPLING STOCK - TECHNICAL DELIVERY CONDITIONS |
| 07/30150368 DC : 0 | ISO 16918-1 - IRON AND STEEL - DETERMINATION OF NINE ELEMENTS BY THE INDUCTIVELY COUPLED PLASMA ATOMIC MASS SPECTROSCOPIC METHOD - PART 1: DETERMINATION OF TIN, ANTIMONY, CERIUM, LEAD AND BISMUTH |
| ISO 10799-1:2011 | Cold-formed welded structural hollow sections of non-alloy and fine grain steels — Part 1: Technical delivery conditions |
| DIN EN 10351:2011-05 | Chemical analysis of ferrous materials - Inductively coupled plasma optical emission spectrometric analysis of unalloyed and low alloyed steels - Determination of Mn, P, Cu, Ni, Cr, Mo, V, Co, Al (total) and Sn [Routine method] |
| API 5CRA CHINESE : 2011 | SPECIFICATION FOR CORROSION RESISTANT ALLOY SEAMLESS TUBES FOR USE AS CASING, TUBING AND COUPLING STOCK |
| UNE-EN 10071:2012 | Chemical analysis of ferrous materials - Determination of manganese in steels and irons - Electrometric titration method |
| UNE-EN ISO 4946:2016 | Steel and cast iron - Determination of copper - 2,2'-Biquinoline spectrophotometric method (ISO 4946:2016) |
| PREN 10208-3 : DRAFT 1997 | PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 3: PIPES OF REQUIREMENT CLASS C |
| BS EN 10083-3 : 2006-08 | STEELS FOR QUENCHING AND TEMPERING - PART 3: TECHNICAL DELIVERY CONDITIONS FOR ALLOY STEELS |
| ISO 4951-1:2001 | High yield strength steel bars and sections — Part 1: General delivery requirements |
| I.S. EN 10217-4:2002 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 4: ELECTRIC WELDED NON-ALLOY STEEL TUBES WITH SPECIFIED LOW TEMPERATURE PROPERTIES |
| PREN 10120 : DRAFT 2014 | STEEL SHEET AND STRIP FOR WELDED GAS CYLINDERS |
| I.S. EN ISO 4957:2000 | TOOL STEELS |
| ISO 9330-6:1997 | Welded steel tubes for pressure purposes — Technical delivery conditions — Part 6: Longitudinally welded austenitic stainless steel tubes |
| I.S. EN 10217-6:2002 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 6: SUBMERGED ARC WELDED NON-ALLOY STEEL TUBES WITH SPECIFIED LOW TEMPERATURE PROPERTIES |
| PREN 10028-1 : DRAFT 2014 | FLAT PRODUCTS MADE OF STEELS FOR PRESSURE PURPOSES - PART 1: GENERAL REQUIREMENTS |
| ISO 13899-2:2005 | Steel — Determination of Mo, Nb and W contents in alloyed steel — Inductively coupled plasma atomic emission spectrometric method — Part 2: Determination of Nb content |
| ISO 9328-1:2018 | Steel flat products for pressure purposes — Technical delivery conditions — Part 1: General requirements |
| ISO 683-5:2017 | Heat treatable steels, alloy steels and free-cutting steels — Part 5: Nitriding steels |
| BS EN 10217-4:2002 | Welded steel tubes for pressure purposes. Technical delivery conditions Electric welded non-alloy steel tubes with specified low temperature properties |
| 16/30332605 DC : 0 | BS EN 10210-1 - HOT FINISHED STRUCTURAL STEEL HOLLOW SECTIONS - PART 1: GENERAL |
| BS EN 10217-5:2002 | Welded steel tubes for pressure purposes. Technical delivery conditions Submerged arc welded non-alloy and alloy steel tubes with specified elevated temperature properties |
| UNE-EN 10351:2012 | Chemical analysis of ferrous materials - Inductively coupled plasma optical emission spectrometric analysis of unalloyed and low alloyed steels - Determination of Mn, P, Cu, Ni, Cr, Mo, V, Co, Al (total) and Sn [Routine method] |
| EN 10217-5:2002/A1:2005 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 5: SUBMERGED ARC WELDED NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES |
| EN 10132-1:2000 | Cold rolled narrow steel strip for heat treatment - Technical delivery conditions - Part 1: General |
| I.S. EN 10088-5:2009 | STAINLESS STEELS - PART 5: TECHNICAL DELIVERY CONDITIONS FOR BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR CONSTRUCTION PURPOSES |
| ISO 4829-1:2018 | Steel and cast iron — Determination of total silicon contents — Reduced molybdosilicate spectrophotometric method — Part 1: Silicon contents between 0,05 % and 1,0 % |
| I.S. EN 10216-2:2013 | SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES |
| EN 10222-1:2017 | Steel forgings for pressure purposes - Part 1: General requirements for open die forgings |
| BS EN 10216-2:2013 | Seamless steel tubes for pressure purposes. Technical delivery conditions Non-alloy and alloy steel tubes with specified elevated temperature properties |
| DIN EN 13261:2011-01 | RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - AXLES - PRODUCT REQUIREMENTS |
| DIN EN 13262:2011-06 | RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - WHEELS - PRODUCT REQUIREMENTS |
| DIN EN 10208-1:2009-07 | STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 1: PIPES OF REQUIREMENT CLASS A |
| BS EN 10095 : 1999-07 | HEAT RESISTING STEELS AND NICKEL ALLOYS |
| BS EN 10276-1:2000 | Chemical analysis of ferrous materials. Determination of oxygen in steel and iron Sampling and preparation of steel samples for oxygen determination |
| UNE-EN 10272:2016 | Stainless steel bars for pressure purposes |
| BS EN 10088-2:2014 | Stainless steels Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes |
| BS EN 10089:2002 | Hot rolled steels for quenched and tempered springs. Technical delivery conditions |
| BS EN 10111:2008 | Continuously hot rolled low carbon steel sheet and strip for cold forming. Technical delivery conditions |
| ISO 4829-2:2016 | Steels Determination of total silicon contents Reduced molybdosilicate spectrophotometric method Part 2: Silicon contents between 0,01 % and 0,05 % |
| BS EN 10184:2006 | Chemical analysis of ferrous materials. Determination of phosphorus in non-alloyed steels and irons. Molybdenum blue spectrophotometric method |
| BS EN 10205:2016 | Cold reduced tinmill products. Blackplate |
| BS EN 10272:2007 | Stainless steel bars for pressure purposes |
| BS EN 13261 : 2009 | RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - AXLES - PRODUCT REQUIREMENTS |
| I.S. EN 10084:2008 | CASE HARDENING STEELS - TECHNICAL DELIVERY CONDITIONS |
| I.S. EN 10120:2017 | STEEL SHEET AND STRIP FOR WELDED GAS CYLINDERS |
| I.S. EN 10222-1:2017 | STEEL FORGINGS FOR PRESSURE PURPOSES - PART 1: GENERAL REQUIREMENTS FOR OPEN DIE FORGINGS |
| I.S. EN 10216-4:2013 | SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 4: NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED LOW TEMPERATURE PROPERTIES |
| EN 10277-1:2008 | Bright steel products - Technical delivery conditions - Part 1: General |
| EN 10263-1:2017 | Steel rod, bars and wire for cold heading and cold extrusion - Part 1: General technical delivery conditions |
| EN 10253-4:2008/AC:2009 | BUTT-WELDING PIPE FITTINGS - PART 4: WROUGHT AUSTENITIC AND AUSTENITIC-FERRITIC (DUPLEX) STAINLESS STEELS WITH SPECIFIC INSPECTION REQUIREMENTS |
| EN 10335:2005 | Steel for packaging - Flat steel products intended for use in contact with foodstuffs, products or beverages for human and animal consumption - Non alloyed electrolytic chromium/chromium oxide coated steel |
| EN 10088-2:2014 | STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
| CEN/TS 15718:2011 | Railway applications - Wheelsets and bogies - Product requirements for cast wheels |
| EN ISO 16120-1:2017 | NON-ALLOY STEEL WIRE ROD FOR CONVERSION TO WIRE - PART 1: GENERAL REQUIREMENTS (ISO 16120-1:2017) |
| EN 10224:2002/A1:2005 | NON-ALLOY STEEL TUBES AND FITTINGS FOR THE CONVEYANCE OF WATER AND OTHER AQUEOUS LIQUIDS - TECHNICAL DELIVERY CONDITIONS |
| EN 10216-1:2013 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties |
| EN 10210-1:2006 | Hot finished structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery conditions |
| EN 10273:2016 | Hot rolled weldable steel bars for pressure purposes with specified elevated temperature properties |
| EN 10270-1:2011+A1:2017 | Steel wire for mechanical springs - Part 1: Patented cold drawn unalloyed spring steel wire |
| EN 10268:2006+A1:2013 | COLD ROLLED STEEL FLAT PRODUCTS WITH HIGH YIELD STRENGTH FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| EN 10088-3:2014 | Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes |
| DIN EN ISO 13900:2002-10 | STEEL - DETERMINATION OF HIGH BORON CONTENT - CURCUMIN SPECTROPHOTOMETRIC METHOD AFTER DISTILLATION |
| EN 10270-2:2011 | Steel wire for mechanical springs - Part 2: Oil hardened and tempered spring steel wire |
| EN 10120:2017 | Steel sheet and strip for welded gas cylinders |
| EN 10219-1:2006 | Cold formed welded structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery conditions |
| EN 10088-4:2009 | Stainless steels - Part 4: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes |
| EN 10361:2015 | Alloyed steels - Determination of nickel content - Inductively coupled plasma optical emission spectrometric method |
| EN 10333:2005 | Steel for packaging - Flat steel products intended for use in contact with foodstuffs, products and beverages for human and animal consumption - Tin coated steel (tinplate) |
| DIN EN 10292:2007-06 | CONTINUOUSLY HOT-DIP COATED STRIP AND SHEET OF STEELS WITH HIGH YIELD STRENGTH FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| EN 10269:2013 | Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties |
| EN 10276-2:2003 | Chemical analysis of ferrous materials - Determination of oxygen content in steel and iron - Part 2: Infrared method after fusion under inert gas |
| EN 10025-1:2004 | Hot rolled products of structural steels - Part 1: General technical delivery conditions |
| EN 10208-1:2009 | Steel pipes for pipelines for combustible fluids - Technical delivery condi-tions - Part 1: Pipes of requirement class A |
| EN 10351:2011 | Chemical analysis of ferrous materials - Inductively coupled plasma optical emission spectrometric analysis of unalloyed and low alloyed steels - Determination of Mn, P, Cu, Ni, Cr, Mo, V, Co, Al (total) and Sn [Routine method] |
| EN 10272:2016 | Stainless steel bars for pressure purposes |
| EN 10253-3:2008 | Butt-welding pipe fittings - Part 3: Wrought austenitic and austenitic-ferritic (duplex) stainless steels without specific inspection requirements |
| EN 10162:2003 | Cold rolled steel sections - Technical delivery conditions - Dimensional and cross-sectional tolerances |
| EN 10355:2013 | Chemical analysis of ferrous materials - Inductively coupled plasma optical emission spectrometric analysis of unalloyed and low alloyed steels - Determination of Si, Mn, P, Cu, Ni, Cr, Mo and Sn, following dissolution with nitric and sulphuric acids [Routine method] |
| EN 10184:2006 | Chemical analysis of ferrous materials - Determination of phosphorus in non-alloyed steels and irons - Molybdenum blue spectrophotometric method |
| EN 10130:2006 | Cold rolled low carbon steel flat products for cold forming - Technical delivery conditions |
| EN 10211:2013 | Chemical analysis of ferrous materials - Determination of titanium in steels and cast irons - Flame atomic absorption spectrometric method |
| DIN EN 10205:2017-03 | COLD REDUCED TINMILL PRODUCTS - BLACKPLATE |
| EN 10205:2016 | Cold reduced tinmill products - Blackplate |
| EN 10292:2007 | Continuously hot-dip coated strip and sheet of steels with high yield strength for cold forming - Technical delivery conditions |
| EN 10207:2017 | Steels for simple pressure vessels - Technical delivery requirements for plates, strips and bars |
| EN 10090:1998 | Valve steels and alloys for internal combustion engines |
| EN 10028-1:2017 | Flat products made of steels for pressure purposes - Part 1: General requirements |
| EN 10276-1:2000 | Chemical analysis of ferrous materials - Determination of oxygen in steel and iron - Part 1: Sampling and preparation of steel samples for oxygen determination |
| EN 10083-2:2006 | Steels for quenching and tempering - Part 2: Technical delivery conditions for non alloy steels |
| EN 10111:2008 | Continuously hot rolled low carbon steel sheet and strip for cold forming - Technical delivery conditions |
| 11/30191093 DC : 0 | BS ISO 10799-1 - COLD FORMED WELDED STRUCTURAL HOLLOW SECTIONS OF NON-ALLOY AND FINE GRAIN STEELS - PART 1: TECHNICAL DELIVERY CONDITIONS |
| BS EN 16451:2015 | Railway applications. Braking. Brake pad holder |
| BS ISO 19272:2015 | Low alloyed steel. Determination of C, Si, Mn, P, S, Cr, Ni, Al, Ti and Cu. Glow discharge optical emission spectrometry (routine method) |
| BIS IS/ISO 3183 : 2007 | PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS |
| 11/30230618 DC : 0 | BS ISO 683-2 - HEAT-TREATABLE STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 2: ALLOY STEELS FOR QUENCHING AND TEMPERING |
| EN 10217-7:2014 | Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes |
| DIN EN 10253-2:2008-09 | Butt-welding pipe fittings - Part 2: Non alloy and ferritic alloy steels with specific inspection requirements |
| 96/709602 DC : DRAFT JUL 1996 | ISO/CD 15351 - STEEL AND IRON - DETERMINATION OF NITROGEN CONTENT - THERMAL CONDUCTIMETRIC METHOD AFTER FUSION UNDER INERT GAS ROUTINE METHOD |
| 12/30208986 DC : 0 | BS ISO 13933 - STEEL AND IRON - DETERMINATION OF CALCIUM AND MAGNESIUM - INDUCTIVELY COUPLED PLASMA ATOMIC EMISSION SPECTROMETRIC METHOD |
| UNI EN ISO 15350 : 2010 | STEEL AND IRON - DETERMINATION OF TOTAL CARBON AND SULFUR CONTENT - INFRARED ABSORPTION METHOD AFTER COMBUSTION IN AN INDUCTION FURNACE (ROUTINE METHOD) |
| S.R. CEN/TR 10362:2014 | CHEMICAL ANALYSIS OF FERROUS MATERIALS - DETERMINATION OF SELENIUM IN STEELS - ELECTROTHERMAL ATOMIC ABSORPTION SPECTROMETRIC METHOD |
| DIN EN 10088-4:2010-01 | Stainless steels - Part 4: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes |
| DIN EN 16451:2015-09 | RAILWAY APPLICATIONS - BRAKING - BRAKE PAD HOLDER |
| BS EN 10361:2015 | Alloyed steels. Determination of nickel content. Inductively coupled plasma optical emission spectrometric method |
| 12/30270633 DC : 0 | BS EN 10222-1 - STEEL FORGINGS FOR PRESSURE PURPOSES - PART 1: GENERAL REQUIREMENTS |
| 13/30252100 DC : 0 | BS ISO 4990 - STEEL CASTINGS - GENERAL TECHNICAL DELIVERY REQUIREMENTS |
| 09/30169302 DC : 0 | BS EN ISO 16120-1 - NON-ALLOY STEEL WIRE ROD FOR CONVERSION TO WIRE - PART 1: GENERAL REQUIREMENTS |
| BS EN ISO 10720:2007 | Steel and iron. Determination of nitrogen content. Thermal conductimetric method after fusion in a current of inert gas |
| BS 6200-3.40.2:1997 | Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Multi-element methods Determination of nickel, copper and cobalt contents by inductively coupled plasma atomic emission spectrometric method. Determination of nickel content |
| BS ISO 13933:2014 | Steel and iron. Determination of calcium and magnesium. Inductively coupled plasma atomic emission spectrometric method |
| 17/30339115 DC : 0 | ISO/DIS 4978 - STEEL SHEET AND STRIP FOR WELDED GAS CYLINDERS |
| 02/713148 DC : DRAFT NOV 2002 | BS ISO 16143-2 - STAINLESS STEELS FOR GENERAL PURPOSES - PART 2: SEMI-FINISHED PRODUCTS, BARS, RODS AND SECTIONS |
| 11/30253751 DC : 0 | BS EN 10269 - STEELS AND NICKEL ALLOYS FOR FASTENERS WITH SPECIFIED ELEVATED AND/OR LOW TEMPERATURE PROPERTIES |
| ISO 10153:1997 | Steel Determination of boron content Curcumin spectrophotometric method |
| DIN EN ISO 4946 E : 2016 | STEEL AND CAST IRON - DETERMINATION OF COPPER - 2,2-BIQUINOLINE SPECTROPHOTOMETRIC METHOD (ISO 4946:2016) |
| PREN 10219-1 : DRAFT 2016 | COLD FORMED WELDED STRUCTURAL STEEL HOLLOW SECTIONS - PART 1: GENERAL |
| 98/712789 DC : DRAFT AUG 98 | PREN 10302 - CREEP RESISTING STEELS, NICKEL AND COBALT ALLOYS |
| UNI EN 10217-7 : 2014 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 7: STAINLESS STEEL TUBES |
| 15/30331537 DC : 0 | BS EN 10207 - STEELS FOR SIMPLE PRESSURE VESSELS - TECHNICAL DELIVERY REQUIREMENTS FOR PLATES, STRIPS AND BARS |
| 13/30276412 DC : 0 | BS EN ISO 4829-2 - STEEL AND IRONS - DETERMINATION OF TOTAL SILICON CONTENT - REDUCED MOLYBDOSILICATE SPECTROPHOTOMETRIC METHOD - PART 2: SILICON CONTENTS BETWEEN 0,01 AND 0,05% |
| PREN 10253-4 : DRAFT 2017 | BUTT-WELDING PIPE FITTINGS - PART 4: WROUGHT AUSTENITIC & AUSTENITIC-FERRITIC (DUPLEX) STAINLESS STEELS WITH SPECIFIC INSPECTION REQUIREMENTS |
| PREN 10088-2 : DRAFT 2011 | STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
| 08/30190548 DC : DRAFT DEC 2008 | BS EN ISO 17054 - ROUTINE METHOD FOR ANALYSIS OF HIGH ALLOY STEEL BY X-RAY FLUORESCENCE SPECTROMETRY (XRF) BY USING A NEAR BY TECHNIQUE |
| DIN EN ISO 15351:2010-08 | Steel and iron - Determination of nitrogen content - Thermal conductimetric method after fusion in a current of inert gas (Routine method) (ISO 15351:1999) |
| 03/103470 DC : DRAFT FEB 2003 | BS EN 10219-1 - COLD FORMED WELDED STRUCTURAL HOLLOW SECTIONS OF NON-ALLOY AND FINE GRAIN STEELS - PART 1: TECHNICAL DELIVERY REQUIREMENTS |
| 03/316092 DC : DRAFT SEP 2003 | ISO 16962 - SURFACE CHEMICAL ANALYSIS - ANALYSIS OF ZINC AND/OR ALUMINIUM-BASED METALLIC COATINGS BY GLOW-DISCHARGE OPTICAL-EMISSION SPECTROMETRY |
| 09/30210423 DC : 0 | BS EN ISO 15350 - STEEL AND IRON - DETERMINATION OF TOTAL CARBON AND SULFUR CONTENT - INFRARED ABSORPTION METHOD AFTER COMBUSTION IN AN INDUCTION FURNACE (ROUTINE METHOD) |
| BS ISO 404:2013 | Steel and steel products. General technical delivery requirements |
| BS EN 10338:2015 | Hot rolled and cold rolled non-coated products of multiphase steels for cold forming. Technical delivery conditions |
| BS ISO 17053:2005 | Steel and iron. Determination of oxygen. Infrared method after fusion under inert gas |
| BS ISO 16962:2017 | Surface chemical analysis. Analysis of zinc- and/or aluminium-based metallic coatings by glow-discharge optical-emission spectrometry |
| BS EN ISO 4938:2016 | Steel and iron. Determination of nickel content. Gravimetric or titrimetric method |
| DD CEN/TS 15718:2011 | Railway applications. Wheelsets and bogies. Product requirements for cast wheels |
| 05/30132585 DC : DRAFT APR 2005 | EN 10083-1 - STEELS FOR QUENCHING AND TEMPERING - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS |
| 07/30144593 DC : 0 | BS ISO 10384 - HOT-ROLLED CARBON STEEL SHEET AS DEFINED BY CHEMICAL COMPOSITION |
| I.S. EN ISO 3183:2012 | PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS (ISO 3183:2012) |
| 12/30250146 DC : 0 | BS ISO 16143-1 - STAINLESS STEELS FOR GENERAL PURPOSES - PART 1: FLAT PRODUCTS |
| 05/30091555 DC : DRAFT MAY 2005 | ISO 3183 - PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS |
| PREN 10210-1 : DRAFT 2016 | HOT FINISHED STRUCTURAL STEEL HOLLOW SECTIONS - PART 1: GENERAL |
| DIN EN 10343:2009-07 | STEELS FOR QUENCHING AND TEMPERING FOR CONSTRUCTION PURPOSES - TECHNICAL DELIVERY CONDITIONS |
| ISO 19272:2015 | Low alloyed steel Determination of C, Si, Mn, P, S, Cr, Ni, Al, Ti and Cu - Glow discharge optical emission spectrometry (routine method) |
| ISO 17054:2010 | Routine method for analysis of high alloy steel by X-ray fluorescence spectrometry (XRF) by using a near-by technique |
| UNI EN 10351 : 2011 | CHEMICAL ANALYSIS OF FERROUS MATERIALS - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRIC ANALYSIS OF UNALLOYED AND LOW ALLOYED STEELS - DETERMINATION OF MN, P, CU, NI, CR, MO, V, CO, AL (TOTAL) AND SN [ROUTINE METHOD] |
| I.S. EN 10217-3:2002 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 3: ALLOY FINE GRAIN STEEL TUBES |
| I.S. EN 10351:2011 | CHEMICAL ANALYSIS OF FERROUS MATERIALS - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRIC ANALYSIS OF UNALLOYED AND LOW ALLOYED STEELS - DETERMINATION OF MN, P, CU, NI, CR, MO, V, CO, AL (TOTAL) AND SN [ROUTINE METHOD] |
| I.S. EN 10217-5:2002 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 5: SUBMERGED ARC WELDED NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES |
| ISO 683-1:2016 | Heat-treatable steels, alloy steels and free-cutting steels Part 1: Non-alloy steels for quenching and tempering |
| PREN 10272 : DRAFT 2013 | STAINLESS STEEL BARS FOR PRESSURE PURPOSES |
| EN 10253-2:2007 | Butt-welding pipe fittings - Part 2: Non alloy and ferritic alloy steels with specific inspection requirements |
| PREN ISO 683-17 : DRAFT 2013 | HEAT-TREATED STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 17: BALL AND ROLLER BEARING STEELS (ISO/DIS 683-17:2013) |
| ISO 3183:2012 | Petroleum and natural gas industries Steel pipe for pipeline transportation systems |
| BS EN ISO 3183 : 2012 | PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS |
| I.S. EN 10207:2017 | STEELS FOR SIMPLE PRESSURE VESSELS - TECHNICAL DELIVERY REQUIREMENTS FOR PLATES, STRIPS AND BARS |
| 17/30346741 DC : 0 | BS EN 10225-1 - WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS - PART 1: PLATES |
| EN 10217-2:2002/A1:2005 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: ELECTRIC WELDED NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES |
| DIN EN 10217-6:2005-04 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 6: SUBMERGED ARC WELDED NON-ALLOY STEEL TUBES WITH SPECIFIED LOW TEMPERATURE PROPERTIES |
| UNE-EN 10088-4:2010 | Stainless steels - Part 4: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes |
| ASTM E 1806 : 2009 | Standard Practice for Sampling Steel and Iron for Determination of Chemical Composition |
| EN ISO 4829-1:2018 | Steel and cast iron - Determination of total silicon contents - Reduced molybdosilicate spectrophotometric method - Part 1: Silicon contents between 0,05 % and 1,0 % (ISO 4829-1:2018) |
| EN 10217-1:2002/A1:2005 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - NON-ALLOY STEEL TUBES WITH SPECIFIED ROOM TEMPERATURE PROPERTIES |
| EN 10083-1:2006 | Steels for quenching and tempering - Part 1: General technical delivery conditions |
| DIN EN 10216-5:2014-03 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes |
| I.S. EN 10253-2:2007 | BUTT-WELDING PIPE FITTINGS - PART 2: NON ALLOY AND FERRITIC ALLOY STEELS WITH SPECIFIC INSPECTION REQUIREMENTS |
| NF EN 13262 : 2004 + A2 2011 | RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - WHEELS - PRODUCT REQUIREMENTS |
| UNE-EN 10120:2018 | Steel sheet and strip for welded gas cylinders |
| DIN EN 10269:2014-02 | STEELS AND NICKEL ALLOYS FOR FASTENERS WITH SPECIFIED ELEVATED AND/OR LOW TEMPERATURE PROPERTIES |
| DIN EN 10211:2014-03 | Chemical analysis of ferrous materials - Determination of titanium in steels and cast irons - Flame atomic absorption spectrometric method |
| DIN EN 10216-2:2014-03 | SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES |
| DIN EN 15049:2007-12 | Railway applications - Suspension components - Torsion bar, steel |
| DIN EN 10130 : 2007-04 | COLD-ROLLED LOW CARBON STEEL FLAT PRODUCTS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| BS EN 10216-4:2013 | Seamless steel tubes for pressure purposes. Technical delivery conditions Non-alloy and alloy steel tubes with specified low temperature properties |
| BS EN 10335:2005 | Steel for packaging. Flat steel products intended for use in contact with foodstuffs, products or beverages for human and animal consumption. Non alloyed electrolytic chromium/chromium oxide coated steel |
| BS EN 10162:2003 | Cold rolled steel sections. Technical delivery conditions. Dimensional and cross-sectional tolerances |
| BS EN 10270-1 : 2011 | STEEL WIRE FOR MECHANICAL SPRINGS - PART 1: PATENTED COLD DRAWN UNALLOYED SPRING STEEL WIRE |
| ONORM EN 10216-2 : 2014 | SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES |
| ISO 13900:1997 | Steel — Determination of boron content — Curcumin spectrophotometric method after distillation |
| DIN EN 10270-2:2012-01 | Steel wire for mechanical springs - Part 2: Oil hardened and tempered spring steel wire |
| I.S. EN 10216-1:2013 | SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 1: NON-ALLOY STEEL TUBES WITH SPECIFIED ROOM TEMPERATURE PROPERTIES |
| I.S. EN 10273:2016 | HOT ROLLED WELDABLE STEEL BARS FOR PRESSURE PURPOSES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES |
| I.S. EN 10216-3:2013 | SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 3: ALLOY FINE GRAIN STEEL TUBES |
| I.S. EN 10130:2006 | COLD ROLLED LOW CARBON STEEL FLAT PRODUCTS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| DIN EN 10208-2:2009-07 | STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 2: PIPES OF REQUIREMENT CLASS B |
| DIN EN 13674-1:2011-04 | RAILWAY APPLICATIONS - TRACK - RAIL - PART 1: VIGNOLE RAILWAY RAILS 46 KG/M AND ABOVE |
| DIN EN 13674-1:2017-07 | RAILWAY APPLICATIONS - TRACK - RAIL - PART 1: VIGNOLE RAILWAY RAILS 46 KG/M AND ABOVE |
| DIN EN 10028-1:2017-10 | FLAT PRODUCTS MADE OF STEELS FOR PRESSURE PURPOSES - PART 1: GENERAL REQUIREMENTS |
| I.S. EN 10270-1:2011 | STEEL WIRE FOR MECHANICAL SPRINGS - PART 1: PATENTED COLD DRAWN UNALLOYED SPRING STEEL WIRE |
| ONORM EN 13261 : 2012 | RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - AXLES - PRODUCT REQUIREMENTS |
| I.S. EN 10216-5:2013 | SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 5: STAINLESS STEEL TUBES |
| I.S. EN 10088-2:2014 | STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
| DIN EN 10210-1:2006-07 | Hot finished structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery conditions |
| I.S. EN 10217-7:2014 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 7: STAINLESS STEEL TUBES |
| I.S. EN 10205:2016 | COLD REDUCED TINMILL PRODUCTS - BLACKPLATE |
| DIN EN 10208-1:1998-02 | STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 1: PIPES OF REQUIREMENT CLASS A |
| I.S. EN 10211:2013 | CHEMICAL ANALYSIS OF FERROUS MATERIALS - DETERMINATION OF TITANIUM IN STEELS AND CAST IRONS - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD |
| DIN EN 10088-2:2014-12 | STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
| I.S. EN 10270-2:2011 | STEEL WIRE FOR MECHANICAL SPRINGS - PART 2: OIL HARDENED AND TEMPERED SPRING STEEL WIRE |
| I.S. EN 10270-3:2011 | STEEL WIRE FOR MECHANICAL SPRINGS - PART 3: STAINLESS SPRING STEEL WIRE |
| I.S. EN 10269:2013 | STEELS AND NICKEL ALLOYS FOR FASTENERS WITH SPECIFIED ELEVATED AND/OR LOW TEMPERATURE PROPERTIES |
| I.S. EN 10219-1:2006 | COLD FORMED WELDED STRUCTURAL HOLLOW SECTIONS OF NON-ALLOY AND FINE GRAIN STEELS - PART 1: TECHNICAL DELIVERY CONDITIONS |
| I.S. EN 10083-2:2006 | STEELS FOR QUENCHING AND TEMPERING - PART 2: TECHNICAL DELIVERY CONDITIONS FOR NON ALLOY STEELS |
| I.S. EN 10272:2016&LC:2016 | STAINLESS STEEL BARS FOR PRESSURE PURPOSES |
| I.S. EN ISO 683-17:2014 | HEAT-TREATED STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 17: BALL AND ROLLER BEARING STEELS (ISO 683-17:2014) |
| I.S. EN 10200:2012 | CHEMICAL ANALYSIS OF FERROUS MATERIALS - DETERMINATION OF BORON IN STEEL - SPECTROPHOTOMETRIC METHOD |
| DIN EN ISO 10720:2007-06 | Steel and iron - Determination of nitrogen content - Thermal conductimetric method after fusion in a current of inert gas (ISO 10720:1997) |
| I.S. EN 10088-3:2014 | STAINLESS STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR SEMI-FINISHED PRODUCTS, BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
| I.S. EN 10268:2006 | COLD ROLLED STEEL FLAT PRODUCTS WITH HIGH YIELD STRENGTH FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| I.S. EN 10210-1:2006 | HOT FINISHED STRUCTURAL HOLLOW SECTIONS OF NON-ALLOY AND FINE GRAIN STEELS - PART 1: TECHNICAL DELIVERY CONDITIONS |
| DIN EN 10088-3:2014-12 | Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes |
| DIN EN 10083-3:2007-01 | STEELS FOR QUENCHING AND TEMPERING - PART 3: TECHNICAL DELIVERY CONDITIONS FOR ALLOY STEELS |
| I.S. EN 13674-1:2011 | RAILWAY APPLICATIONS - TRACK - RAIL - PART 1: VIGNOLE RAILWAY RAILS 46 KG/M AND ABOVE |
| DIN EN 10025-1:2005-02 | Hot rolled products of structural steels - Part 1: General technical delivery conditions; German version EN 10025-1:2004 |
| I.S. EN 10028-1:2017 | FLAT PRODUCTS MADE OF STEELS FOR PRESSURE PURPOSES - PART 1: GENERAL REQUIREMENTS |
| I.S. EN 10277-1:2008 | BRIGHT STEEL PRODUCTS - TECHNICAL DELIVERY CONDITIONS - PART 1: GENERAL |
| DIN EN 10277-1:2008-06 | BRIGHT STEEL PRODUCTS - TECHNICAL DELIVERY CONDITIONS - PART 1: GENERAL |
| I.S. EN 10111:2008 | CONTINUOUSLY HOT ROLLED LOW CARBON STEEL SHEET AND STRIP FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| I.S. EN 10302:2008 | CREEP RESISTING STEELS, NICKEL AND COBALT ALLOYS |
| UNI EN 10111 : 2008 | CONTINUOUSLY HOT ROLLED LOW CARBON STEEL SHEET AND STRIP FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| UNE-EN ISO 4938:2016 | Steel and iron - Determination of nickel content - Gravimetric or titrimetric method (ISO 4938:2016) |
| 05/30092093 DC : DRAFT JUL 2005 | ISO 24314 - STRUCTURAL STEELS - STEELS FOR SEISMIC IMPROVED RESISTANCE FOR BUILDING |
| ISO 13898-2:1997 | Steel and iron Determination of nickel, copper and cobalt contents Inductively coupled plasma atomic emission spectrometric method Part 2: Determination of nickel content |
| I.S. EN ISO 4938:2016 | STEEL AND IRON - DETERMINATION OF NICKEL CONTENT - GRAVIMETRIC OR TITRIMETRIC METHOD (ISO 4938:2016) |
| 15/30296029 DC : 0 | BS ISO 4955 - HEAT-RESISTANT STEELS |
| 01/714936 DC : DRAFT NOV 2001 | ISO 4934 - STEEL AND IRON - DETERMINATION OF SULFUR CONTENT - GRAVIMETRIC METHOD |
| 11/30235499 DC : 0 | BS EN ISO 3183 - PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS |
| DIN EN 10205:1992-01 | COLD REDUCED TIN-MILL PRODUCTS - BLACKPLATE |
| BS ISO 16143-3:2014 | Stainless steels for general purposes Wire |
| UNE-EN 10338:2016 | Hot rolled and cold rolled non-coated products of multiphase steels for cold forming - Technical delivery conditions |
| 08/30182454 DC : DRAFT JULY 2008 | BS EN 10208-1 - STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 1: PIPES OF REQUIREMENT CLASS A |
| 17/30347067 DC : 0 | BS EN 10340-1 - STEEL CASTINGS FOR STRUCTURAL USES - PART 1: GENERAL |
| UNI EN 10088-5 : 2009 | Stainless steels - Part 5: Technical delivery conditions for bars, rods, wire, sections and cold-formed products of corrosion-resistant steel for use in construction |
| 12/30250152 DC : 0 | BS ISO 16143-3 - STAINLESS STEELS FOR GENERAL PURPOSES - PART 3: WIRE |
| PD ISO/TS 10719:2016 | Cast irons. Determination of non-combined carbon content. Infrared absorption method after combustion in an induction furnace |
| 14/30295082 DC : 0 | BS ISO 683-3 - HEAT-TREATABLE STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 3: CASE HARDENING STEELS |
| DIN EN 10253-4:2008-06 | BUTT-WELDING PIPE FITTINGS - PART 4: WROUGHT AUSTENITIC AND AUSTENITIC-FERRITIC (DUPLEX) STAINLESS STEELS WITH SPECIFIC INSPECTION REQUIREMENTS |
| I.S. EN 10083-1:2006 | STEELS FOR QUENCHING AND TEMPERING - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS |
| API 5L RUSSIAN : 2012 | SPECIFICATION FOR LINE PIPE |
| 04/30107827 DC : DRAFT JAN 2004 | ISO 17925 - ZINC AND/OR ALUMINIUM BASED COATINGS ON STEEL - DETERMINATION OF MASS PER UNIT AREA AND CHEMICAL COMPOSITION - GRAVIMETRY, INDUCTIVELY COUPLED PLASMA ATOMIC EMISSION SPECTROMETRY AND FLAME ATOMIC ABSORPTION SPECTROMETRY |
| 14/30276360 DC : 0 | BS ISO 4939 - STEEL AND CAST IRON - DETERMINATION OF NICKEL CONTENT - DIMETHYLGLYOXIME SPECTROPHOTOMETRIC METHOD |
| 14/30312176 DC : 0 | BS EN 10120 - STEEL SHEET AND STRIP FOR WELDED GAS CYLINDERS |
| BS ISO 4990:2015 | Steel castings. General technical delivery requirements |
| UNI EN 10216-5 : 2014 | SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 5: STAINLESS STEEL TUBES |
| PD CEN/TR 10362:2014 | Chemical analysis of ferrous materials. Determination of selenium in steels. Electrothermal atomic absorption spectrometric method |
| 13/30288572 DC : 0 | BS EN 10272 - STAINLESS STEEL BARS FOR PRESSURE PURPOSES |
| DIN EN ISO 16120-1:2017-09 | NON-ALLOY STEEL WIRE ROD FOR CONVERSION TO WIRE - PART 1: GENERAL REQUIREMENTS (ISO 16120-1:2017) |
| 17/30346735 DC : 0 | BS EN 10225-3 - WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS - PART 3: HOT FINISHED HOLLOW SECTIONS |
| ONORM EN 10217-7 : 2014 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 7: STAINLESS STEEL TUBES |
| 11/30239473 DC : 0 | BS EN 10025-1 - HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS |
| 99/701054 DC : DRAFT JAN 1999 | PREN 10089 - HOT-ROLLED STEELS FOR QUENCHED AND TEMPERED SPRINGS - TECHNICAL DELIVERY CONDITIONS |
| 13/30288575 DC : 0 | BS EN 10273 - HOT ROLLED WELDABLE STEEL BARS FOR PRESSURE PURPOSES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES |
| ONORM EN 10216-5 : 2014 | SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 5: STAINLESS STEEL TUBES |
| ISO 10384:2012 | Hot-rolled carbon steel sheet as defined by chemical composition |
| BS EN ISO 15351:2010 | Steel and iron. Determination of nitrogen content. Thermal conductimetric method after fusion in a current of inert gas (Routine method) |
| 08/30167676 DC : DRAFT JAN 2008 | BS EN 10120 - STEEL SHEET AND STRIP FOR WELDED GAS CYLINDERS |
| PD 6635:1999 | Non-alloy steel rod for drawing and/or cold rolling. General purpose rod, rimmed and rimmed substitute low carbon steel rod, rod for special applications. Requirements and tests |
| BS 6200-3.40.4:1997 | Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Multi-element methods Determination of nickel, copper and cobalt contents by inductively coupled plasma atomic emission spectrometric method. Determination of cobalt content |
| 11/30230615 DC : 0 | BS ISO 683-1 - HEAT-TREATABLE STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 1: NON-ALLOY STEELS FOR QUENCHING AND TEMPERING |
| PREN 10222-1 : DRAFT 2012 | STEEL FORGINGS FOR PRESSURE PURPOSES - PART 1: GENERAL REQUIREMENTS |
| 06/30155635 DC : 0 | EN 13261 - RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - AXLES - PRODUCT REQUIREMENTS |
| BS EN ISO 16120-1:2017 | Non-alloy steel wire rod for conversion to wire General requirements |
| 05/30132603 DC : DRAFT APR 2005 | EN 10083-3 - STEELS FOR QUENCHING AND TEMPERING - PART 3: TECHNICAL DELIVERY CONDITIONS FOR ALLOY STEELS |
| 05/30126202 DC : 0 | EN 10088-4 - STAINLESS STEELS - PART 4: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR CONSTRUCTION PURPOSES |
| I.S. EN 10085:2001 | NITRIDING STEELS - TECHNICAL DELIVERY CONDITIONS |
| DIN EN 10355:2013-11 | Chemical analysis of ferrous materials - Inductively coupled plasma optical emission spectrometric analysis of unalloyed and low alloyed steels - Determination of Si, Mn, P, Cu, Ni, Cr, Mo and Sn, following dissolution with nitric and sulphuric acids [Routine method] |
| UNI EN 10253-4 : 2009 | BUTT-WELDING PIPE FITTINGS - PART 4: WROUGHT AUSTENITIC AND AUSTENITIC-FERRITIC (DUPLEX) STAINLESS STEELS WITH SPECIFIC INSPECTION REQUIREMENTS |
| ISO/TR 17055:2002 | Steel Determination of silicon content Inductively coupled plasma atomic emission spectrometric method |
| DIN EN 10355 E : 2013 | CHEMICAL ANALYSIS OF FERROUS MATERIALS - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRIC ANALYSIS OF UNALLOYED AND LOW ALLOYED STEELS - DETERMINATION OF SI, MN, P, CU, NI, CR, MO AND SN, FOLLOWING DISSOLUTION WITH NITRIC AND SULPHURIC ACIDS [ROUTINE METHOD] |
| ISO 15355:1999 | Steel and iron — Determination of chromium content — Indirect titration method |
| ISO/TS 13899-3:2005 | Steel — Determination of Mo, Nb and W contents in alloyed steel — Inductively coupled plasma atomic emission spectrometric method — Part 3: Determination of W content |
| ISO 683-18:2014 | Heat-treatable steels, alloy steels and free-cutting steels — Part 18: Bright steel products |
| UNE-EN 10355:2014 | Chemical analysis of ferrous materials - Inductively coupled plasma optical emission spectrometric analysis of unalloyed and low alloyed steels - Determination of Si, Mn, P, Cu, Ni, Cr, Mo and Sn, following dissolution with nitric and sulphuric acids [Routine method] |
| ISO 9329-4:1997 | Seamless steel tubes for pressure purposes — Technical delivery conditions — Part 4: Austenitic stainless steels |
| KTA 3211.1 : 2015 | PRESSURE AND ACTIVITY RETAINING COMPONENTS OF SYSTEMS OUTSIDE THE PRIMARY CIRCUIT - PART 1: MATERIALS |
| NF EN ISO 4957 : 2000 | TOOL STEELS |
| EN 10217-3:2002/A1:2005 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 3: ALLOY FINE GRAIN STEEL TUBES |
| I.S. EN 10361:2015 | ALLOYED STEELS - DETERMINATION OF NICKEL CONTENT - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRIC METHOD |
| ISO 4952:2006 | Structural steels with improved atmospheric corrosion resistance |
| UNE-EN 10205:2017 | Cold reduced tinmill products - Blackplate |
| 17/30347070 DC : 0 | BS EN 10340-2 - STEEL CASTINGS FOR STRUCTURAL USES - PART 2: TECHNICAL DELIVERY CONDITIONS |
| DIN EN 10217-5:2005-04 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 5: SUBMERGED ARC WELDED NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES |
| DIN EN 10217-3:2005-04 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 3: ALLOY FINE GRAIN STEEL TUBES |
| UNI EN ISO 15351 : 2010 | STEEL AND IRON - DETERMINATION OF NITROGEN CONTENT - THERMAL CONDUCTIMETRIC METHOD AFTER FUSION IN A CURRENT OF INERT GAS (ROUTINE METHOD) |
| DIN EN 10217-1:2005-04 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 1: NON-ALLOY STEEL TUBES WITH SPECIFIED ROOM TEMPERATURE PROPERTIES |
| ASTM E 1806 : 2009 : R2016 | Standard Practice for Sampling Steel and Iron for Determination of Chemical Composition |
| EN ISO 15349-2:2003 | Unalloyed steel - Determination of low carbon content - Part 2: Infrared absorption method after combustion in an induction furnace (with preheating) (ISO 15349-2:1999) |
| ISO 18632:2010 | Alloyed steel Determination of manganese Potentiometric and visual titration method |
| BS EN 10217-6:2002 | Welded steel tubes for pressure purposes. Technical delivery conditions Submerged arc welded non-alloy steel tubes with specified low temperature properties |
| PREN 10255 : DRAFT 2010 | NON-ALLOY STEEL TUBES SUITABLE FOR WELDING AND THREADING - TECHNICAL DELIVERY CONDITIONS |
| ISO 6930-1:2001 | High yield strength steel plates and wide flats for cold forming Part 1: Delivery conditions for thermomechanically-rolled steels |
| ISO 11505:2012 | Surface chemical analysis — General procedures for quantitative compositional depth profiling by glow discharge optical emission spectrometry |
| ISO 15353:2001 | Steel and iron — Determination of tin content — Flame atomic absorption spectrometric method (extraction as Sn-SCN) |
| I.S. EN 10225:2009 | WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS |
| I.S. EN 10270-1:2011+A1:2017 | STEEL WIRE FOR MECHANICAL SPRINGS - PART 1: PATENTED COLD DRAWN UNALLOYED SPRING STEEL WIRE |
| ISO 3183-3:1999 | Petroleum and natural gas industries — Steel pipe for pipelines — Technical delivery conditions — Part 3: Pipes of requirement class C |
| ISO 13898-1:1997 | Steel and iron Determination of nickel, copper and cobalt contents Inductively coupled plasma atomic emission spectrometric method Part 1: General requirements and sample dissolution |
| ISO 6931-1:2016 | Stainless steels for springs Part 1: Wire |
| UNE-EN 10088-2:2015 | Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes |
| ISO 4939:2016 | Steel Determination of nickel Dimethylglyoxime spectrophotometric method |
| DIN EN 10083-1:2006-10 | STEELS FOR QUENCHING AND TEMPERING - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS |
| I.S. EN 10132-1:2000 | COLD ROLLED NARROW STEEL STRIP FOR HEAT TREATMENT - TECHNICAL DELIVERY CONDITIONS - PART 1: GENERAL |
| DIN EN ISO 683-17:2015-02 | Heat-treated steels, alloy steels and free-cutting steels - Part 17: Ball and roller bearing steels (ISO 683-17:2014) |
| DIN EN 10216-3:2014-03 | SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 3: ALLOY FINE GRAIN STEEL TUBES |
| UNE-EN 10208-1:2011 | Steel pipes for pipelines for combustible fluids - Technical delivery conditions - Part 1: Pipes of requirement class A |
| DIN EN 10089:2003-04 | Hot rolled steels for quenched and tempered springs - Technical delivery conditions; German version EN 10089:2002 |
| UNI EN 10216-2 : 2014 | SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES |
| BS EN 10071:2012 | Chemical analysis of ferrous materials. Determination of manganese in steels and irons. Electrometric titration method |
| BS EN 13674-1 : 2011 | RAILWAY APPLICATIONS - TRACK - RAIL - PART 1: VIGNOLE RAILWAY RAILS 46 KG/M AND ABOVE |
| BS EN 10333:2005 | Steel for packaging. Flat steel products intended for use in contact with foodstuffs, products or beverages for human and animal consumption. Tin coated steel (tinplate) |
| BS EN 10211:2013 | Chemical analysis of ferrous materials. Determination of titanium in steels and cast irons. Flame atomic absorption spectrometric method |
| UNE-EN 10200:2012 | Chemical analysis of ferrous materials - Determination of boron in steels - Spectrophotometric method |
| BS EN 10208-2:2009 | Steel pipes for pipelines for combustible fluids. Technical delivery conditions Pipes of requirement class B |
| ISO 15350:2000 | Steel and iron — Determination of total carbon and sulfur content — Infrared absorption method after combustion in an induction furnace (routine method) |
| BS EN 10217-7:2014 | Welded steel tubes for pressure purposes. Technical delivery conditions Stainless steel tubes |
| BS EN ISO 15349-2:2003 | Unalloyed steel. Determination of low carbon content Infrared absorption method after combustion in an induction furnace (with preheating) |
| BS EN 10120:2017 | Steel sheet and strip for welded gas cylinders |
| BS EN 10224:2002 | Non-alloy steel tubes and fittings for the conveyance of water and other aqueous liquids. Technical delivery conditions |
| UNE-EN 10088-3:2015 | Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes |
| UNE-EN 10216-4:2014 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 4: Non-alloy and alloy steel tubes with specified low temperature properties |
| UNI EN 13262 : 2011 | RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - WHEELS - PRODUCT REQUIREMENTS |
| ONORM EN ISO 13680 : 2010 | PETROLEUM AND NATURAL GAS INDUSTRIES - CORROSION-RESISTANT ALLOY SEAMLESS TUBES FOR USE AS CASING, TUBING AND COUPLING STOCK - TECHNICAL DELIVERY CONDITIONS |
| UNI EN 13261 : 2011 | RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - AXLES - PRODUCT REQUIREMENTS |
| UNI EN ISO 13680 : 2010 | PETROLEUM AND NATURAL GAS INDUSTRIES - CORROSION-RESISTANT ALLOY SEAMLESS TUBES FOR USE AS CASING, TUBING AND COUPLING STOCK - TECHNICAL DELIVERY CONDITIONS |
| EN 13261:2009+A1:2010 | Railway applications - Wheelsets and bogies - Axles - Product requirements |
| EN ISO 13680:2010 | Petroleum and natural gas industries - Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock - Technical delivery conditions (ISO 13680:2010) |
| I.S. EN 13262:2004 | RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - WHEELS - PRODUCT REQUIREMENTS |
| UNE-EN 10225:2010 | Weldable structural steels for fixed offshore structures - Technical delivery conditions |
| EN 13262:2004+A2:2011 | Railway applications - Wheelsets and bogies - Wheels - Product requirements |
| EN 10334:2005 | Steel for packaging - Flat steel products intended for use in contact with foodstuffs, products and beverages for human and animal consumption - Non-coated steel (blackplate) |
| UNI EN 10088-3 : 2014 | STAINLESS STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR SEMIFINISHED PRODUCTS, BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
| UNI EN 10208-2 : 2009 | STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 2: PIPES OF REQUIREMENT CLASS B |
| UNI EN ISO 683-17 : 2014 | HEAT-TREATED STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 17: BALL AND ROLLER BEARING STEELS |
| UNI EN 10269 : 2013 | Nickel steels and alloys for fasteners with specific properties at high and / or low temperatures |
| UNI EN 10225 : 2009 | WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS |
| UNI EN 10268 : 2013 | COLD ROLLED STEEL FLAT PRODUCTS WITH HIGH YIELD STRENGTH FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| UNI EN 10083-1 : 2006 | STEELS FOR QUENCHING AND TEMPERING - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS |
| UNI EN 10219-1 : 2006 | COLD FORMED WELDED STRUCTURAL HOLLOW SECTIONS OF NON-ALLOY AND FINE GRAIN STEELS - PART 1: TECHNICAL DELIVERY CONDITIONS |
| UNI EN 10083-3 : 2006 | STEELS FOR QUENCHING AND TEMPERING - PART 3: TECHNICAL DELIVERY CONDITIONS FOR ALLOY STEELS |
| UNI EN 10208-1 : 2009 | STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 1: PIPES OF REQUIREMENT CLASS A |
| UNI EN 10211 : 2014 | CHEMICAL ANALYSIS OF FERROUS MATERIALS - DETERMINATION OF TITANIUM IN STEELS AND CAST IRONS - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD |
| UNI EN 10216-4 : 2014 | SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 4: NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED LOW TEMPERATURE PROPERTIES |
| UNI EN 10216-1 : 2014 | SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 1: NON-ALLOY STEEL TUBES WITH SPECIFIED ROOM TEMPERATURE PROPERTIES |
| UNI EN 10088-2:2014 | STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
| UNI EN 10084 : 2008 | CASE HARDENING STEELS - TECHNICAL DELIVERY CONDITIONS |
| EN ISO 15351:2010 | Steel and iron - Determination of nitrogen content - Thermal conductimetric method after fusion in a current of inert gas (Routine method) (ISO 15351:1999) |
| UNI EN 10270-2 : 2011 | STEEL WIRE FOR MECHANICAL SPRINGS - PART 2: OIL HARDENED AND TEMPERED SPRING STEEL WIRE |
| UNI EN 10302 : 2008 | CREEP RESISTING STEELS, NICKEL AND COBALT ALLOYS |
| UNI EN 10071 : 2012 | CHEMICAL ANALYSIS OF FERROUS MATERIALS - DETERMINATION OF MANGANESE IN STEELS AND IRONS - ELECTROMETRIC TITRATION METHOD |
| UNI EN 10216-3 : 2014 | SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 3: ALLOY FINE GRAIN STEEL TUBES |
| UNI EN 10200 : 2012 | CHEMICAL ANALYSIS OF FERROUS MATERIALS - DETERMINATION OF BORON IN STEEL - SPECTROPHOTOMETRIC METHOD |
| DIN EN 10361:2016-02 | ALLOYED STEELS - DETERMINATION OF NICKEL CONTENT - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRIC METHOD |
| UNI CEN/TS 15718 : 2011 | RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - PRODUCT REQUIREMENTS FOR CAST WHEELS |
| ISO 6930-2:2004 | High yield strength steel plates and wide flats for cold forming Part 2: Delivery condition for normalized, normalized rolled and as-rolled steels |
| ISO 9330-5:2000 | Welded steel tubes for pressure purposes — Technical delivery conditions — Part 5: Submerged arc-welded unalloyed and alloyed steel tubes with specified low temperature properties |
| DIN EN 10361 E : 2016 | ALLOYED STEELS - DETERMINATION OF NICKEL CONTENT - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRIC METHOD |
| 02/713774 DC : DRAFT DEC 2002 | EN 10336 - CONTINUOUSLY HOT-DIP COATED AND ELECTROLYTICALLY COATED STRIP AND SHEET OF MULTIPHASE STEELS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| DIN EN ISO 4946:2016-08 | STEEL AND CAST IRON - DETERMINATION OF COPPER - 2,2'-BIQUINOLINE SPECTROPHOTOMETRIC METHOD (ISO 4946:2016) |
| I.S. EN 10087:1999 | FREE-CUTTING STEELS - TECHNICAL DELIVERY CONDITIONS FOR SEMI-FINISHED PRODUCTS, HOT-ROLLED BARS AND RODS |
| 04/30109456 DC : DRAFT FEB 2004 | ISO 17053 - STEEL AND IRON - DETERMINATION OF OXYGEN CONTENT - INFRARED METHOD AFTER FUSION UNDER INERT GAS |
| 14/30276366 DC : 0 | BS EN ISO 4946 - STEEL AND CAST IRON - DETERMINATION OF COPPER CONTENT - 2,2'-DIQUINOLYL SPECTROPHOTOMETRIC METHOD |
| 02/704945 DC : DRAFT APR 2002 | PREN 10326 - CONTINUOUSLY HOT-DIP COATED STRUCTURAL STEELS STRIP AND SHEET - TECHNICAL DELIVERY CONDITIONS |
| CEN/TR 10362:2014 | Chemical analysis of ferrous materials - Determination of selenium in steels - Electrothermal atomic absorption spectrometric method |
| 13/30276415 DC : 0 | BS EN ISO 4938 - STEEL AND IRONS - DETERMINATION OF NICKEL CONTENT - GRAVIMETRIC OR TITRIMETRIC METHOD |
| BS EN 10217-2 : 2002 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: ELECTRIC WELDED NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES |
| BS ISO 16143-2:2014 | Stainless steels for general purposes Corrosion-resistant semi-finished products, bars, rods and sections |
| 98/705399 DC : DRAFT MAR 1998 | PREN 10025-1 - HOT ROLLED PRODUCTS OF NON-ALLOY STRUCTURAL STEELS - PART 1: GENERAL DELIVERY CONDITIONS |
| PREN 10211 : DRAFT 2013 | CHEMICAL ANALYSIS OF FERROUS MATERIALS - DETERMINATION OF TITANIUM IN STEELS AND CAST IRONS - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD |
| BS 6200-3.5.3:1998 | Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Determination of boron Curcumin spectrophotometric method after distillation |
| 03/108196 DC : 0 | EN 10253-4 - BUTT WELDING PIPE FITTINGS - PART 4: WROUGHT AUSTENITIC & AUSTENITIC-FERRITIC (DUPLEX) STAINLESS STEELS WITH SPECIFIC INSPECTION REQUIREMENTS |
| BS ISO 4942:2016 | Steels and irons. Determination of vanadium content. N-BPHA spectrophotometric method |
| I.S. EN 10025-1:2004 | HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS |
| 12/30256440 DC : 0 | BS EN 10200 - CHEMICAL ANALYSIS OF FERROUS MATERIALS - DETERMINATION OF BORON IN STEEL - SPECTROPHOTOMETRIC METHOD |
| PREN 10200 : DRAFT 2012 | CHEMICAL ANALYSIS OF FERROUS MATERIALS - DETERMINATION OF BORON IN STEEL - SPECTROPHOTOMETRIC METHOD |
| EN 10216-5:2013 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes |
| 09/30210426 DC : 0 | BS EN ISO 15351 - STEEL AND IRON - DETERMINATION OF NITROGEN CONTENT - THERMAL CONDUCTIMETRIC METHOD AFTER FUSION IN A CURRENT OF INERT GAS (ROUTINE METHOD) |
| BS ISO 683-5:2017 | Heat treatable steels, alloy steels and free-cutting steels Nitriding steels |
| DD ISO/TS 25138:2010 | Surface chemical analysis. Analysis of metal oxide films by glow-discharge optical-emission spectrometry |
| 04/300984 DC : DRAFT JAN 2004 | BS ISO 4955 - HEAT-RESISTING STEELS |
| UNI EN 10253-3 : 2009 | BUTT-WELDING PIPE FITTINGS - PART 3: WROUGHT AUSTENITIC AND AUSTENITIC-FERRITIC (DUPLEX) STAINLESS STEELS WITHOUT SPECIFIC INSPECTION REQUIREMENTS |
| UNI EN 10343 : 2009 | STEELS FOR QUENCHING AND TEMPERING FOR CONSTRUCTION PURPOSES - TECHNICAL DELIVERY CONDITIONS |
| DIN EN 10210-1:2016-01 (Draft) | Hot finished structural steel hollow sections - Part 1: General; German and English version prEN 10210-1:2016 |
| BS EN 10355:2013 | Chemical analysis of ferrous materials. Inductively coupled plasma optical emission spectrometric analysis of unalloyed and low alloyed steels. Determination of Si, Mn, P, Cu, Ni, Cr, Mo and Sn, following dissolution with nitric and sulphuric acids [Routine method] |
| BS ISO 3183-3:1999 | Petroleum and natural gas industries. Steel pipe for pipelines. Technical delivery conditions Pipes of requirement class C |
| 14/30294825 DC : 0 | BS EN 10263-1 - STEEL ROD, BARS AND WIRE FOR COLD HEADING AND COLD EXTRUSION - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS |
| DIN EN 10253-3:2009-02 | BUTT-WELDING PIPE FITTINGS - PART 3: WROUGHT AUSTENITIC AND AUSTENITIC-FERRITIC (DUPLEX) STAINLESS STEELS WITHOUT SPECIFIC INSPECTION REQUIREMENTS |
| DIN EN 10088-5:2009-07 | STAINLESS STEELS - PART 5: TECHNICAL DELIVERY CONDITIONS FOR BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR CONSTRUCTION PURPOSES |
| BS ISO 11505:2012 | Surface chemical analysis. General procedures for quantitative compositional depth profiling by glow discharge optical emission spectrometry |
| 04/301144 DC : DRAFT JAN 2004 | ISO 6931-2 - STAINLESS STEELS FOR SPRINGS - PART 2: NARROW STRIP |
| 11/30230612 DC : 0 | BS ISO 683-11 - HEAT-TREATABLE STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 11: CASE-HARDENING STEELS |
| 08/30180850 DC : DRAFT JUNE 2008 | BS EN 10270-1 - STEEL WIRE FOR MECHANICAL SPRINGS - PART 1: PATENTED COLD DRAWN UNALLOYED SPRING STEEL WIRE |
| 02/713544 DC : DRAFT NOV 2002 | EN 10268 - COLD ROLLED FLAT PRODUCTS WITH HIGHER YIELD STRENGTH FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| 08/30180853 DC : DRAFT JUNE 2008 | BS EN 10270-2 - STEEL WIRE FOR MECHANICAL SPRINGS - PART 2: OIL HARDENED AND TEMPERED SPRING STEEL WIRE |
| BS ISO 16143-1:2014 | Stainless steels for general purposes Corrosion-resistant flat products |
| UNI EN 10355 : 2013 | CHEMICAL ANALYSIS OF FERROUS MATERIALS - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRIC ANALYSIS OF UNALLOYED AND LOW ALLOYED STEELS - DETERMINATION OF SI, MN, P, CU, NI, CR, MO AND SN, FOLLOWING DISSOLUTION WITH NITRIC AND SULPHURIC ACIDS [ROUTINE METHOD] |
| ISO 17925:2004 | Zinc and/or aluminium based coatings on steel — Determination of coating mass per unit area and chemical composition — Gravimetry, inductively coupled plasma atomic emission spectrometry and flame atomic absorption spectrometry |
| BS EN 10253-4:2008 | Butt-welding pipe fittings Wrought austenitic and austenitic-ferritic (duplex) stainless steels with specific inspection requirements |
| BS EN 10088-4:2009 | Stainless steels Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes |
| API 5L CHINESE : 2012 | SPECIFICATION FOR LINE PIPE |
| API SPEC 5CRA : 2010 | SPECIFICATION FOR CORROSION-RESISTANT ALLOY SEAMLESS TUBES FOR USE AS CASING, TUBING AND COUPLING STOCK |
| ISO/TS 10719:2016 | Cast irons — Determination of non-combined carbon content — lnfrared absorption method after combustion in an induction furnace |
| I.S. EN ISO 15351:2010 | STEEL AND IRON - DETERMINATION OF NITROGEN CONTENT - THERMAL CONDUCTIMETRIC METHOD AFTER FUSION IN A CURRENT OF INERT GAS (ROUTINE METHOD) |
| I.S. EN 10338:2015 | HOT ROLLED AND COLD ROLLED NON-COATED PRODUCTS OF MULTIPHASE STEELS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| PREN 10269 : DRAFT 2011 | STEELS AND NICKEL ALLOYS FOR FASTENERS WITH SPECIFIED ELEVATED AND/OR LOW TEMPERATURE PROPERTIES |
| BS EN 10217-3:2002 | Welded steel tubes for pressure purposes. Technical delivery conditions Alloy fine grain steel tubes |
| ISO 13898-3:1997 | Steel and iron Determination of nickel, copper and cobalt contents Inductively coupled plasma atomic emission spectrometric method Part 3: Determination of copper content |
| PREN 10273 : DRAFT 2013 | HOT ROLLED WELDABLE STEEL BARS FOR PRESSURE PURPOSES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES |
| EN ISO 3183:2012/A1:2018 | PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS (ISO 3183:2012) |
| BS EN 10207:2017 | Steels for simple pressure vessels. Technical delivery requirements for plates, strips and bars |
| DIN EN 10217-2:2005-04 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: ELECTRIC WELDED NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES |
| I.S. EN 10217-1:2002 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 1: NON-ALLOY STEEL TUBES WITH SPECIFIED ROOM TEMPERATURE PROPERTIES |
| DIN EN 10217-4:2005-04 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 4: ELECTRIC WELDED NON-ALLOY STEEL TUBES WITH SPECIFIED LOW TEMPERATURE PROPERTIES |
| ISO 16143-1:2014 | Stainless steels for general purposes Part 1: Corrosion-resistant flat products |
| PREN 10268 : DRAFT 2002 | COLD ROLLED FLAT PRODUCTS WITH HIGHER YIELD STRENGTH FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| EN 10217-6:2002/A1:2005 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 6: SUBMERGED ARC WELDED NON-ALLOY STEEL TUBES WITH SPECIFIED LOW TEMPERATURE PROPERTIES |
| PREN 10071 : DRAFT 2012 | CHEMICAL ANALYSIS OF FERROUS PRODUCTS - DETERMINATION OF MANGANESE IN STEELS AND IRONS - ELECTROMETRIC TITRATION METHOD |
| DIN EN 10270-3:2012-01 | STEEL WIRE FOR MECHANICAL SPRINGS - PART 3: STAINLESS SPRING STEEL WIRE |
| EN 10083-3:2006/AC:2008 | STEELS FOR QUENCHING AND TEMPERING - PART 3: TECHNICAL DELIVERY CONDITIONS FOR ALLOY STEELS |
| ISO 5003:2016 | Flat bottom (Vignole) railway rails 43 kg/m and above |
| ISO/TR 12662:1997 | Certification scheme for prestressing steels |
| ISO 16650:2004 | Bead wire |
| PREN 10340-2 : DRAFT 2017 | STEEL CASTINGS FOR STRUCTURAL USES - PART 2: TECHNICAL DELIVERY CONDITIONS |
| ISO/TS 25138:2010 | Surface chemical analysis Analysis of metal oxide films by glow-discharge optical-emission spectrometry |
| ISO 16143-2:2014 | Stainless steels for general purposes Part 2: Corrosion-resistant semi-finished products, bars, rods and sections |
| ISO/TR 15349-3:1998 | Unalloyed steel Determination of low carbon content Part 3: Infrared absorption method after combustion in an electric resistance furnace (with preheating) |
| ISO 4990:2015 | Steel castings — General technical delivery requirements |
| ISO 4955:2016 | Heat-resistant steels |
| ISO 683-11:2012 | Heat-treatable steels, alloy steels and free-cutting steels Part 11: Case-hardening steels |
| I.S. EN 10263-1:2017 | STEEL ROD, BARS AND WIRE FOR COLD HEADING AND COLD EXTRUSION - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS |
| EN 10216-2:2013 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties |
| ISO 4957:1999 | Tool steels |
| ONORM EN ISO 3183 : 2013 | PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS (ISO 3183:2012) |
| DIN EN 10200:2013-01 | CHEMICAL ANALYSIS OF FERROUS MATERIALS - DETERMINATION OF BORON IN STEELS - SPECTROPHOTOMETRIC METHOD |
| DIN EN 10268:2013-12 | COLD ROLLED STEEL FLAT PRODUCTS WITH HIGH YIELD STRENGTH FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| DIN EN 10216-4:2014-03 | SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 4: NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED LOW TEMPERATURE PROPERTIES |
| UNE-EN 10208-2:2011 | Steel pipes for pipelines for combustible fluids - Technical delivery conditions - Part 2: Pipes of requirement class B |
| DIN EN 10151:2003-02 | STAINLESS STEEL STRIP FOR SPRINGS - TECHNICAL DELIVERY CONDITIONS |
| DIN EN 10071:2013-01 | CHEMICAL ANALYSIS OF FERROUS MATERIALS - DETERMINATION OF MANGANESE IN STEELS AND IRONS - ELECTROMETRIC TITRATION METHOD |
| DIN EN 10217-7:2015-01 | Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes |
| DIN EN 15049 E : 2007 | RAILWAY APPLICATIONS - SUSPENSION COMPONENTS - TORSION BAR, STEEL |
| DIN EN 10084:2008-06 | CASE HARDENING STEELS - TECHNICAL DELIVERY CONDITIONS |
| DIN EN 10225:2009-10 | WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS |
| DIN EN 10219-1:2016-01 (Draft) | Cold formed welded structural steel hollow sections - Part 1: General; German and English version prEN 10219-1:2016 |
| DIN EN 10085:2001-07 | Nitriding steels - Technical delivery conditions; English version of DIN EN 10085 |
| DIN EN 10272:2016-10 | STAINLESS STEEL BARS FOR PRESSURE PURPOSES |
| BS EN 10334:2005 | Steel for packaging. Flat steel products intended for use in contact with foodstuffs, products and beverages for human and animal consumption. Non-coated steel (blackplate) |
| BS EN ISO 13680:2010 | Petroleum and natural gas industries. Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock Technical delivery conditions |
| UNE-EN 10270-2:2012 | Steel wire for mechanical springs - Part 2: Oil hardened and tempered spring steel wire |
| ISO 13680:2010 | Petroleum and natural gas industries Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock Technical delivery conditions |
| BS EN 10216-5:2013 | Seamless steel tubes for pressure purposes. Technical delivery conditions Stainless steel tubes |
| BS EN 10025-1:2004 | Hot rolled products of structural steels General technical delivery conditions |
| BS EN ISO 13900:2002 | Steel. Determination of boron content. Curcumin spectrophotometric method after distillation |
| UNE-EN 10216-2:2014 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties |
| BS EN 10084 : 2008-06 | CASE HARDENING STEELS - TECHNICAL DELIVERY CONDITIONS |
| BS EN 10087 : 1999-01 | FREE CUTTING STEELS - TECHNICAL DELIVERY CONDITIONS FOR SEMI-FINISHED PRODUCTS, HOT ROLLED BARS AND RODS |
| ISO 4934:2003 | Steel and iron Determination of sulfur content Gravimetric method |
| ISO 10720:1997 | Steel and iron — Determination of nitrogen content — Thermal conductimetric method after fusion in a current of inert gas |
| BS EN 13262 : 2004 | RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - WHEELS - PRODUCT REQUIREMENTS |
| BS EN ISO 4934:2003 | Steel and iron. Determination of sulfur content. Gravimetric method |
| BS EN 10216-3:2013 | Seamless steel tubes for pressure purposes. Technical delivery conditions Alloy fine grain steel tubes |
| BS EN 10083-2:2006 | Steels for quenching and tempering Technical delivery conditions for non alloy steels |
| BS EN 10270-3:2011 | Steel wire for mechanical springs Stainless spring steel wire |
| BS EN 10083-1:2006 | Steels for quenching and tempering General technical delivery conditions |
| BS EN 10088-3:2014 | Stainless steels Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes |
| UNE-EN 10269:2014 | Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties |
| ISO 16120-1:2017 | Non-alloy steel wire rod for conversion to wire — Part 1: General requirements |
| ISO 15351:1999 | Steel and iron — Determination of nitrogen content — Thermal conductimetric method after fusion in a current of inert gas (Routine method) |
| BS EN ISO 683-17:2014 | Heat-treated steels, alloy steels and free-cutting steels Ball and roller bearing steels |
| BS EN 10270-2:2011 | Steel wire for mechanical springs Oil hardened and tempered spring steel wire |
| ISO 4938:2016 | Steel and iron Determination of nickel content Gravimetric or titrimetric method |
| ISO 4946:2016 | Steel and cast iron Determination of copper 2,2'-Biquinoline spectrophotometric method |
| ISO 683-17:2014 | Heat-treated steels, alloy steels and free-cutting steels — Part 17: Ball and roller bearing steels |
| DIN EN 10270-1:2017-09 | STEEL WIRE FOR MECHANICAL SPRINGS - PART 1: PATENTED COLD DRAWN UNALLOYED SPRING STEEL WIRE |
| BS EN 10090:1998 | Valve steels and alloys for internal combustion engines |
| BS EN 15049:2007 | Railway applications. Suspension components. Torsion bar, steel |
| UNE-EN 10216-3:2014 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes |
| UNE-EN 13262:2005 | Railway applications - Wheelsets and bogies - Wheels - Product requirement. |
| BS EN 10267:1998 | Ferritic-pearlitic steels for precipitation hardening from hot-working temperatures |
| UNE-EN ISO 683-17:2015 | Heat-treated steels, alloy steels and free-cutting steels - Part 17: Ball and roller bearing steels (ISO 683-17:2014) |
| UNE-EN 10216-5:2014 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes |
| UNE-EN 10216-1:2014 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties |
| UNE-EN 10268:2007 | Cold rolled steel flat products with high yield strength for cold forming - Technical delivery conditions |
| UNE-EN 10270-3:2012 | Steel wire for mechanical springs - Part 3: Stainless spring steel wire |
| BS EN 10085 : 2001-05 | NITRIDING STEEL - TECHNICAL DELIVERY CONDITIONS |
| UNE-EN 10028-1:2017 | Flat products made of steels for pressure purposes - Part 1: General requirements |
| BS EN 13298:2003 | Railway applications. Suspension components. Helical suspension springs, steel |
| DIN EN 10224:2005-12 | NON-ALLOY STEEL TUBES AND FITTINGS FOR THE CONVEYANCE OF WATER AND OTHER AQUEOUS LIQUIDS - TECHNICAL DELIVERY CONDITIONS |
| DIN EN 10292:2003-09 | CONTINUOUSLY HOT-DIP COATED STRIP AND SHEET OF STEELS WITH HIGH YIELD STRENGTH FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| EN ISO 683-17:2014 | Heat-treated steels, alloy steels and free-cutting steels - Part 17: Ball and roller bearing steels (ISO 683-17:2014) |
| EN 10225:2009 | Weldable structural steels for fixed offshore structures - Technical delivery conditions |
| EN 15049:2007 | Railway applications - Suspension components - Torsion bar, steel |
| EN ISO 15350:2010 | Steel and iron - Determination of total carbon and sulfur content - Infrared absorption method after combustion in an induction furnace (routine method) (ISO 15350:2000) |
| EN 16451:2015 | Railway applications - Braking - Brake pad holder |
| UNI EN 10277-1 : 2008 | BRIGHT STEEL PRODUCTS - TECHNICAL DELIVERY CONDITIONS - PART 1: GENERAL |
| EN ISO 4938:2016 | Steel and iron - Determination of nickel content - Gravimetric or titrimetric method (ISO 4938:2016) |
| EN ISO 4934:2003 | Steel and iron - Determination of sulfur content - Gravimetric method (ISO 4934:2003) |
| EN 13674-1:2011+A1:2017 | Railway applications - Track - Rail - Part 1: Vignole railway rails 46 kg/m and above |
| EN ISO 4829-2:2016 | Steels - Determination of total silicon contents - Reduced molybdosilicate spectrophotometric method - Part 2: Silicon contents between 0,01 % and 0,05 % (ISO 4829-2:2016) |
| EN ISO 10720:2007 | Steel and iron - Determination of nitrogen content - Thermal conductimetric method after fusion in a current of inert gas (ISO 10720:1997) |
| EN ISO 4946:2016 | Steel and cast iron - Determination of copper - 2,2'-Biquinoline spectrophotometric method (ISO 4946:2016) |
| EN ISO 13900:2002 | Steel - Determination of boron content - Curcumin spectrophotometric method after distillation (ISO 13900:1997) |
| I.S. EN ISO 16120-1:2017 | NON-ALLOY STEEL WIRE ROD FOR CONVERSION TO WIRE - PART 1: GENERAL REQUIREMENTS (ISO 16120-1:2017) |
| PREN 10253-2 : DRAFT 2017 | BUTT-WELDING PIPE FITTINGS - PART 2: NON ALLOY AND FERRITIC ALLOY STEELS WITH SPECIFIC INSPECTION REQUIREMENTS |
| BS EN 10253-2:2007 | Butt-welding pipe fittings Non alloy and ferritic alloy steels with specific inspection requirements |
| 14/30284697 DC : 0 | BS ISO 683-5 - HEAT TREATABLE STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 5: NITRIDING STEELS |
| ISO/TR 11637:1997 | Boron treated engineering steels for quenching and tempering |
| I.S. EN 10208-1:2009 | STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 1: PIPES OF REQUIREMENT CLASS A |
| PREN 10263-1 : DRAFT 2014 | STEEL ROD, BARS AND WIRE FOR COLD HEADING AND COLD EXTRUSION - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS |
| 01/713568 DC : DRAFT OCT 2001 | ISO/DIS 17058 - STEEL AND IRON - DETERMINATION OF ARSENIC CONTENT - SPECTROPHOTOMETRIC METHOD |
| BS ISO 13899-2:2005 | Steel. Determination of Mo, Nb and W contents in alloyed steel. Inductively coupled plasma atomic emission spectrometric method Determination of Nb Content |
| 17/30346747 DC : 0 | BS ISO 9328-1 - STEEL FLAT PRODUCTS FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 1: GENERAL REQUIREMENTS |
| I.S. EN ISO 4934:2004 | STEEL AND IRON - DETERMINATION OF SULFUR CONTENT - GRAVIMETRIC METHOD |
| 13/30291170 DC : 0 | BS EN 10361 - ALLOYED STEELS - DETERMINATION OF NICKEL CONTENT - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRIC METHOD |
| BS ISO 18632:2010 | Alloyed steel. Determination of manganese. Potentiometric and visual titration method |
| 14/30258987 DC : 0 | BS ISO 6935-2 - STEEL FOR THE REINFORCEMENT OF CONCRETE - PART 2: RIBBED BARS |
| 14/30312182 DC : 0 | BS EN 10028-1 - FLAT PRODUCTS MADE OF STEELS FOR PRESSURE PURPOSES - PART 1: GENERAL REQUIREMENTS |
| ISO 6935-2:2015 | Steel for the reinforcement of concrete Part 2: Ribbed bars |
| BS 6200-3.40.1:1997 | Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Multi-element methods Determination of nickel, copper and cobalt contents by inductively coupled plasma atomic emission spectrometric method. General requirements and sample dissolution |
| ISO 683-4:2016 | Heat-treatable steels, alloy steels and free-cutting steels Part 4: Free-cutting steels |
| BS 6200-3.22.4(1997) : 1997 | SAMPLING AND ANALYSIS OF IRON, STEEL AND OTHER FERROUS METALS - METHODS OF ANALYSIS - DETERMINATION OF NITROGEN - THERMAL CONDUCTIMETRIC METHOD AFTER FUSION IN A CURRENT OF INERT GAS |
| PREN 10088-3 : DRAFT 2011 | STAINLESS STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR SEMI-FINISHED PRODUCTS, BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
| 11/30254171 DC : 0 | BS EN 10088-2 - STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
| 13/30277495 DC : 0 | BS EN 10211 - CHEMICAL ANALYSIS OF FERROUS MATERIALS - DETERMINATION OF TITANIUM IN STEELS AND CAST IRONS - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD |
| BS EN 10217-1:2002 | Welded steel tubes for pressure purposes. Technical delivery conditions Non-alloy steel tubes with specified room temperature properties |
| 02/704946 DC : DRAFT APR 2002 | PREN 10327 - CONTINUOUSLY HOT-DIP COATED STRIP AND SHEET OF LOW CARBON STEELS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| BS EN 10088-5:2009 | Stainless steels Technical delivery conditions for bars, rods, wire, sections and bright products of corrosion resisting steels for construction purposes |
| BS EN 10253-3:2008 | Butt-welding pipe fittings Wrought austenitic and austenitic-ferritic (duplex) stainless steels without specific inspection requirements |
| ISO 683-14:2004 | Heat-treatable steels, alloy steels and free-cutting steels — Part 14: Hot-rolled steels for quenched and tempered springs |
| DIN EN 16451 E : 2015 | RAILWAY APPLICATIONS - BRAKING - BRAKE PAD HOLDER |
| DIN EN ISO 15350:2010-08 | Steel and iron - Determination of total carbon and sulfur content - Infrared absorption method after combustion in an induction furnace (routine method) (ISO 15350:2000) |
| 10/30233309 DC : 0 | BS EN 10255 - NON-ALLOY STEEL TUBES SUITABLE FOR WELDING AND THREADING - TECHNICAL DELIVERY CONDITIONS |
| ISO 9330-4:2000 | Welded steel tubes for pressure purposes — Technical delivery conditions — Part 4: Submerged arc-welded unalloyed and alloyed steel tubes with specified elevated temperature properties |
| 12/30255191 DC : 0 | BS ISO 11505 - SURFACE CHEMICAL ANALYSIS - GENERAL PROCEDURES FOR QUANTITATIVE COMPOSITIONAL DEPTH PROFILING BY GLOW DISCHARGE OPTICAL EMISSION SPECTROMETRY |
| 12/30256443 DC : 0 | BS EN 10071 - CHEMICAL ANALYSIS OF FERROUS PRODUCTS - DETERMINATION OF MANGANESE IN STEELS AND IRONS - ELECTROMETRIC TITRATION METHOD |
| UNE-EN ISO 4829-2:2016 | Steels - Determination of total silicon contents - Reduced molybdosilicate spectrophotometric method - Part 2: Silicon contents between 0,01 % and 0,05 % (ISO 4829-2:2016) |
| 08/30182457 DC : DRAFT JULY 2008 | BS EN 10208-2 - STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 2: PIPES OF REQUIREMENT CLASS B |
| BS EN ISO 15350:2010 | Steel and iron. Determination of total carbon and sulfur content. Infrared absorption method after combustion in an induction furnace (routine method) |
| 16/30317161 DC : 0 | BS EN ISO 4829-1 - STEEL AND CAST IRON - DETERMINATION OF TOTAL SILICON CONTENTS - REDUCED MOLYBDOSILICATE SPECTROPHOTOMETRIC METHOD - PART 1: SILICON CONTENTS BETWEEN 0,05% AND 1,0% |
| 04/30124490 DC : DRAFT OCT 2004 | EN 15049 - RAILWAY APPLICATIONS - SUSPENSION COMPONENTS - TORSION BAR, STEEL |
| BS 6200-3.31.3:2002 | Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Determination of tin Flame atomic absorption spectrometric method (extraction as Sn-SCN) |
| 04/30090408 DC : DRAFT FEB 2004 | ISO 13899-2 - STEEL - DETERMINATION OF MO, NB AND W CONTENTS IN ALLOYED STEEL - ICP-AES METHOD |
| UNE-EN ISO 16120-1:2017 | Non-alloy steel wire rod for conversion to wire - Part 1: General requirements (ISO 16120-1:2017) |
| 97/703009 DC : 0 | PREN 10208-3 - PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 3: PIPES OF REQUIREMENT CLASS C |
| 05/30135488 DC : DRAFT JUN 2005 | EN 10292 ED 2 - CONTINUOUSLY HOT-DIP COATED STRIP AND SHEET OF STEELS WITH HIGHER YIELD STRENGTH FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| UNE-EN 10361:2016 | Alloyed steels - Determination of nickel content - Inductively coupled plasma optical emission spectrometric method |
| 05/30132598 DC : DRAFT APR 2005 | EN 10083-2 - STEELS FOR QUENCHING AND TEMPERING - PART 2: TECHNICAL DELIVERY CONDITIONS FOR NON ALLOYS STEELS |
| 03/314809 DC : DRAFT SEP 2003 | EN ISO 13680 - PETROLEUM AND NATURAL GAS INDUSTRIES - CORROSION-RESISTANT ALLOY SEAMLESS TUBES FOR USE AS CASING, TUBING AND COUPLING STOCK - TECHNICAL DELIVERY CONDITIONS |
| API 5CRA : 2010 : INC : ERR 1 : 2011 : R2015 | SPECIFICATION FOR CORROSION-RESISTANT ALLOY SEAMLESS TUBES FOR USE AS CASING, TUBING AND COUPLING STOCK |
| S.R. CEN/TS 15718:2011 | RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - PRODUCT REQUIREMENTS FOR CAST WHEELS |
| UNI EN 10270-3 : 2011 | STEEL WIRE FOR MECHANICAL SPRINGS - PART 3: STAINLESS SPRING STEEL WIRE |
| DIN EN ISO 3183:2013-03 | PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS (ISO 3183:2012) |
| PREN 10025-1 : DRAFT 2011 | HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS |
| I.S. EN 10355:2013 | CHEMICAL ANALYSIS OF FERROUS MATERIALS - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRIC ANALYSIS OF UNALLOYED AND LOW ALLOYED STEELS - DETERMINATION OF SI, MN, P, CU, NI, CR, MO AND SN, FOLLOWING DISSOLUTION WITH NITRIC AND SULPHURIC ACIDS [ROUTINE METHOD] |
| I.S. EN ISO 4946:2016 | STEEL AND CAST IRON - DETERMINATION OF COPPER - 2,2'-BIQUINOLINE SPECTROPHOTOMETRIC METHOD (ISO 4946:2016) |
| ISO 4942:2016 | Steels and irons Determination of vanadium content N-BPHA spectrophotometric method |
| I.S. EN 16451:2015 | RAILWAY APPLICATIONS - BRAKING - BRAKE PAD HOLDER |
| I.S. EN ISO 4829-1:2018 | STEEL AND CAST IRON - DETERMINATION OF TOTAL SILICON CONTENTS - REDUCED MOLYBDOSILICATE SPECTROPHOTOMETRIC METHOD - PART 1: SILICON CONTENTS BETWEEN 0,05% AND 1,0% (ISO 4829-1:2018) |
| UNI EN ISO 3183 : 2012 | PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS |
| I.S. EN 10315:2006 | ROUTINE METHOD FOR ANALYSIS OF HIGH ALLOY STEEL BY X-RAY FLUORESCENCE SPECTROMETRY (XRF) BY USING A NEAR BY TECHNIQUE |
| ISO 11652:1997 | Steel and iron Determination of cobalt content Flame atomic absorption spectrometric method |
| I.S. EN 10343:2009 | STEELS FOR QUENCHING AND TEMPERING FOR CONSTRUCTION PURPOSES - TECHNICAL DELIVERY CONDITIONS |
| BS EN 10263-1:2017 | Steel rod, bars and wire for cold heading and cold extrusion General technical delivery conditions |
| NF EN ISO 15350 : 2010 | STEEL AND IRON - DETERMINATION OF TOTAL CARBON AND SULFUR CONTENT - INFRARED ABSORPTION METHOD AFTER COMBUSTION IN AN INDUCTION FURNACE (ROUTINE METHOD) |
| ISO 13933:2014 | Steel and iron Determination of calcium and magnesium Inductively coupled plasma atomic emission spectrometric method |
| ISO 8458-1:2002 | Steel wire for mechanical springs Part 1: General requirements |
| ISO 16962:2017 | Surface chemical analysis Analysis of zinc- and/or aluminium-based metallic coatings by glow-discharge optical-emission spectrometry |
| I.S. EN 10253-4:2008 | BUTT-WELDING PIPE FITTINGS - PART 4: WROUGHT AUSTENITIC AND AUSTENITIC-FERRITIC (DUPLEX) STAINLESS STEELS WITH SPECIFIC INSPECTION REQUIREMENTS |
| 17/30353548 DC : 0 | BS EN 10277 - BRIGHT STEEL PRODUCTS - TECHNICAL DELIVERY CONDITIONS |
| I.S. EN 10217-2:2002 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: ELECTRIC WELDED NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES |
| I.S. EN ISO 15350:2010 | STEEL AND IRON - DETERMINATION OF TOTAL CARBON AND SULFUR CONTENT - INFRARED ABSORPTION METHOD AFTER COMBUSTION IN AN INDUCTION FURNACE (ROUTINE METHOD) |
| 17/30346732 DC : 0 | BS EN 10225-4 - WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS - PART 4: COLD FORMED WELDED HOLLOW SECTIONS |
| UNI EN 10088-4 : 2009 | STAINLESS STEELS - PART 4: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR CONSTRUCTION PURPOSES |
| ISO/TS 13899-1:2004 | Steel — Determination of Mo, Nb and W contents in alloyed steel — Inductively coupled plasma atomic emission spectrometric method — Part 1: Determination of Mo content |
| ISO 12633-1:2011 | Hot-finished structural hollow sections of non-alloy and fine grain steels — Part 1: Technical delivery conditions |
| ISO 16143-3:2014 | Stainless steels for general purposes Part 3: Wire |
| ISO 630-1:2011 | Structural steels Part 1: General technical delivery conditions for hot-rolled products |
| I.S. EN ISO 10720:2007 | STEEL AND IRON - DETERMINATION OF NITROGEN CONTENT - THERMAL CONDUCTIMETRIC METHOD AFTER FUSION IN A CURRENT OF INERT GAS |
| EN ISO 4957:1999 | Tool steels (ISO 4957:1999) |
| ISO/TR 15349-1:1998 | Unalloyed steel Determination of low carbon content Part 1: Infrared absorption method after combustion in an electric resistance furnace (by peak separation) |
| EN 10217-4:2002/A1:2005 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 4: ELECTRIC WELDED NON-ALLOY STEEL TUBES WITH SPECIFIED LOW TEMPERATURE PROPERTIES |
| ISO 6931-2:2005 | Stainless steels for springs Part 2: Narrow strip |
| ISO 3183-2:1996 | Petroleum and natural gas industries — Steel pipe for pipelines — Technical delivery conditions — Part 2: Pipes of requirements class B |
| ISO 16918-1:2009 | Steel and iron Determination of nine elements by the inductively coupled plasma mass spectrometric method Part 1: Determination of tin, antimony, cerium, lead and bismuth |
| I.S. EN 10088-4:2009 | STAINLESS STEELS - PART 4: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR CONSTRUCTION PURPOSES |
| ISO 17058:2004 | Steel and iron — Determination of arsenic content — Spectrophotometric method |
| I.S. EN 10253-3:2008 | BUTT-WELDING PIPE FITTINGS - PART 3: WROUGHT AUSTENITIC AND AUSTENITIC-FERRITIC (DUPLEX) STAINLESS STEELS WITHOUT SPECIFIC INSPECTION REQUIREMENTS |
| I.S. EN 10083-3:2006 | STEELS FOR QUENCHING AND TEMPERING - PART 3: TECHNICAL DELIVERY CONDITIONS FOR ALLOY STEELS |
| ISO 13898-4:1997 | Steel and iron Determination of nickel, copper and cobalt contents Inductively coupled plasma atomic emission spectrometric method Part 4: Determination of cobalt content |
| DIN EN ISO 15349-2:2003-09 | Unalloyed steel - Determination of low carbon content - Part 2: Infrared absorption method after combustion in an induction furnace (with preheating) (ISO 15349-2:1999) |
| DIN EN 10025-1:2011-04 (Draft) | Hot rolled products of structural steels - Part 1: General technical delivery conditions; German version prEN 10025-1:2011 |
| DIN EN 10083-1 E : 2006 | STEELS FOR QUENCHING AND TEMPERING - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS |
| DIN EN 10216-1:2014-03 | SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 1: NON-ALLOY STEEL TUBES WITH SPECIFIED ROOM TEMPERATURE PROPERTIES |
| BS EN 10269:2013 | Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties |
| BS EN 10208-1:2009 | Steel pipes for pipelines for combustible fluids. Technical delivery conditions Pipes of requirement class A |
| BS EN 10276-2:2003 | Chemical analysis of ferrous materials. Determination of oxygen in steel and iron Infrared method after fusion under inert gas |
| BS EN 10210-1:2006 | Hot finished structural hollow sections of non-alloy and fine grain steels Technical delivery requirements |
| BS EN 10216-1:2013 | Seamless steel tubes for pressure purposes. Technical delivery conditions Non-alloy steel tubes with specified room temperature properties |
| BS EN 10268 : 2006 | COLD ROLLED STEEL FLAT PRODUCTS WITH HIGH YIELD STRENGTH FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| UNE-EN 10273:2016 | Hot rolled weldable steel bars for pressure purposes with specified elevated temperature properties |
| UNE-EN 10222-1:2017 | Steel forgings for pressure purposes - Part 1: General requirements for open die forgings |
| BS EN 10225:2009 | Weldable structural steels for fixed offshore structures. Technical delivery conditions |
| BS EN 10130:2006 | Cold rolled low carbon steel flat products for cold forming. Technical delivery conditions |
| BS EN 10132-1:2000 | Cold rolled narrow steel strip for heat treatment. Technical delivery conditions General |
| BS EN 10222-1:2017 | Steel forgings for pressure purposes General requirements for open die forgings |
| BS EN 10200:2012 | Chemical analysis of ferrous materials. Determination of boron in steels. Spectrophotometric method |
| BS EN ISO 4957:2000 | Tool steels |
| BS EN 10302:2008 | Creep resisting steels, nickel and cobalt alloys |
| BS EN 10028-1:2017 | Flat products made of steels for pressure purposes General requirements |
| ISO 15349-2:1999 | Unalloyed steel Determination of low carbon content Part 2: Infrared absorption method after combustion in an induction furnace (with preheating) |
| BS EN 10151:2002 | Stainless steel strip for springs. Technical delivery conditions |
| BS EN 10219-1:2006 | Cold formed welded structural hollow sections of non-alloy and fine grain steels Technical delivery requirements |
| BS EN 10277-1:2008 | Bright steel products. Technical delivery conditions General |
| BS EN 10273:2016 | Hot rolled weldable steel bars for pressure purposes with specified elevated temperature properties |
| BS EN 10292:2007 | Continuously hot-dip coated strip and sheet of steels with high yield strength for cold forming. Technical delivery conditions |
| EN 10087:1998 | Free-cutting steels - Technical delivery conditions for semi-finished products, hot-rolled bars and rods |
| EN 10084:2008 | Case hardening steels - Technical delivery conditions |
| EN 10216-4:2013 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 4: Non-alloy and alloy steel tubes with specified low temperature properties |
| EN 10270-3:2011 | Steel wire for mechanical springs - Part 3: Stainless spring steel wire |
| DIN EN 10333:2005-07 | Steel for packaging - Flat steel products intended for use in contact with foodstuffs, products and beverages for human and animal consumption - Tin coated steel (tinplate); German version EN 10333:2005 |
| DIN EN ISO 4934:2004-05 | Steel and iron - Determination of sulfur content - Gravimetric method (ISO 4934:2003) |
| DIN EN 10334:2005-07 | STEEL FOR PACKAGING - FLAT STEEL PRODUCTS INTENDED FOR USE IN CONTACT WITH FOODSTUFFS, PRODUCTS AND BEVERAGES FOR HUMAN AND ANIMAL CONSUMPTION - NON-COATED STEEL (BLACKPLATE) |
| EN 10088-5:2009 | Stainless steels - Part 5: Technical delivery conditions for bars, rods, wire, sections and bright products of corrosion resisting steels for construction purposes |
| EN 10343:2009 | Steels for quenching and tempering for construction purposes - Technical delivery conditions |
| EN 10208-2:2009 | Steel pipes for pipelines for combustible fluids - Technical delivery conditions - Part 2: Pipes of requirement class B |
| EN 10338:2015 | Hot rolled and cold rolled non-coated products of multiphase steels for cold forming - Technical delivery conditions |
| DIN EN 10219-1:2006-07 | Cold formed welded structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery conditions |
| EN 10095:1999 | Heat resisting steels and nickel alloys |
| EN 10216-3:2013 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes |
| EN 10315:2006 | Routine method for analysis of high alloy steel by X-ray Fluorescence Spectrometry (XRF) by using a near by technique |
| EN 10200:2012 | Chemical analysis of ferrous materials - Determination of boron in steels - Spectrophotometric method |
| EN 10151:2002 | Stainless steel strip for springs - Technical delivery conditions |
| EN 10267:1998 | Ferritic-pearlitic steels for precipitation hardening from hot-working temperatures |
| EN 10089:2002 | Hot-rolled steels for quenched and tempered springs - Technical delivery conditions |
| EN 10071:2012 | Chemical analysis of ferrous materials - Determination of manganese in steels and irons - Electrometric titration method |
| EN 10302:2008 | Creep resisting steels, nickel and cobalt alloys |
| DIN EN 10184:2006-05 | Chemical analysis of ferrous materials - Determination of phosphorus in non-alloyed steels and irons - Molybdenum blue spectrophotometric method |
| DIN EN 10111:2008-06 | CONTINUOUSLY HOT ROLLED LOW CARBON STEEL SHEET AND STRIP FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| EN 13298:2003 | Railway applications - Suspension components - Helical suspension springs, steel |
| DIN EN 10335:2005-07 | Steel for packaging - Flat steel products intended for use in contact with foodstuffs, products or beverages for human and animal consumption - Non alloyed electrolytic chromium/chromium oxide coated steel; German version EN 10335:2005 |
| DIN EN 10162:2003-12 | Cold-rolled steel sections - Technical delivery conditions - Dimensional and cross-sectional tolerances; German version EN 10162:2003 |
| UNE-EN 10270-1:2012 | Steel wire for mechanical springs - Part 1: Patented cold drawn unalloyed spring steel wire |
| ONORM EN ISO 683-17 : 2015 | HEAT-TREATED STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 17: BALL AND ROLLER BEARING STEELS (ISO 683-17:2014) |
| EN ISO 377:2017 | Steel and steel products - Location and preparation of samples and test pieces for mechanical testing (ISO 377:2017) |
| ISO 9147:1987 | Pig-irons — Definition and classification |
| ISO 377:2017 | Steel and steel products — Location and preparation of samples and test pieces for mechanical testing |
$118.72
Including GST where applicable
AUD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - English
PDF 1 User - English
PDF 3 Users - English
PDF 5 Users - English
PDF 9 Users - English
Hardcopy - French
PDF 1 User - French
PDF 3 Users - French
PDF 5 Users - French
PDF 9 Users - French
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.