|
DIN EN ISO 15614-14 E : 2013
|
SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 14: LASER-ARC HYBRID WELDING OF STEELS, NICKEL AND NICKEL ALLOYS (ISO 15614-14:2013) |
|
PREN 10253-2 : DRAFT 2017
|
BUTT-WELDING PIPE FITTINGS - PART 2: NON ALLOY AND FERRITIC ALLOY STEELS WITH SPECIFIC INSPECTION REQUIREMENTS |
|
API 602 RUSSIAN : 2009
|
STEEL GATE, GLOBE, AND CHECK VALVES FOR SIZES NPS 4 (DN 100) AND SMALLER FOR THE PETROLEUM AND NATURAL GAS INDUSTRIES |
|
ASME STP-NU-078 : 2016
|
COMPARISON REPORT ON WELDING QUALIFICATION AND WELDING QUALITY ASSURANCE |
|
05/30114324 DC : DRAFT FEB 2005
|
EN ISO 14555 - WELDING - ARC STUD WELDING OF METALLIC MATERIALS |
|
UNE EN 14893 : 2014
|
LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE LIQUEFIED PETROLEUM GAS (LPG) WELDED STEEL PRESSURE DRUMS WITH A CAPACITY BETWEEN 150 LITRES AND 1000 LITRES |
|
DNV-OS C401 : LATEST
|
FABRICATION AND TESTING OF OFFSHORE STRUCTURES |
|
16/30336084 DC : 0
|
BS EN ISO 14555 - WELDING - ARC STUD WELDING OF METALLIC MATERIALS |
|
BS ISO 16338 : 2017
|
WELDING FOR AEROSPACE APPLICATIONS - RESISTANCE SPOT AND SEAM WELDING |
|
14/30293465 DC : 0
|
BS EN 13445-10 - UNFIRED PRESSURE VESSELS - PART 10: ADDITIONAL REQUIREMENTS FOR PRESSURE VESSELS OF NICKEL AND NICKEL ALLOYS |
|
DIN EN ISO 25239-3 : 2012
|
FRICTION STIR WELDING - ALUMINIUM - PART 3: QUALIFICATION OF WELDING OPERATORS (ISO 25239-3:2011) |
|
DIN EN 124-3 : 2015
|
GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS - PART 3: GULLY TOPS AND MANHOLE TOPS MADE OF STEEL OR ALUMINIUM ALLOYS |
|
DIN ISO 16338 : 2014
|
WELDING FOR AEROSPACE APPLICATIONS - RESISTANCE SPOT AND SEAM WELDING (ISO 16338:2017) |
|
PREN 1090-3 : DRAFT 2017
|
EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL REQUIREMENTS FOR ALUMINIUM STRUCTURES |
|
BS EN 12493 : 2013
|
LPG EQUIPMENT AND ACCESSORIES - WELDED STEEL PRESSURE VESSELS FOR LPG ROAD TANKERS - DESIGN AND MANUFACTURE |
|
12/30257658 DC : 0
|
BS EN ISO 14555 - WELDING - ARC STUD WELDING OF METALLIC MATERIALS |
|
BS ISO 18172-2 : 2007
|
GAS CYLINDERS - REFILLABLE WELDED STAINLESS STEEL CYLINDERS - PART 2: TEST PRESSURE GREATER THAN 6 MPA |
|
UNI EN ISO 13628-5 : 2010
|
PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 5: SUBSEA UMBILICALS |
|
ISO/DIS 14555 : 60.00 (2017)
|
WELDING - ARC STUD WELDING OF METALLIC MATERIALS |
|
16/30332582 DC : 0
|
BS EN 13480-4:2012/A3 - METALLIC INDUSTRIAL PIPING - PART 4: FABRICATION AND INSTALLATION |
|
PREN 1442 : DRAFT 2014
|
LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LPG - DESIGN AND CONSTRUCTION |
|
16/30294444 DC : 0
|
BS ISO 21029-1 - CRYOGENIC VESSELS - TRANSPORTABLE VACUUM INSULATED VESSELS OF NOT MORE THAN 1000 LITRES VOLUME - PART 1: DESIGN, FABRICATION, INSPECTION AND TESTS |
|
API 602 REDLINE : 2009
|
STEEL GATE, GLOBE, AND CHECK VALVES FOR SIZES NPS 4 (DN 100) AND SMALLER FOR THE PETROLEUM AND NATURAL GAS INDUSTRIES |
|
16/30336440 DC : DRAFT MAR 2016
|
BS EN 1092-1 - FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 1: STEEL FLANGES |
|
14/30300966 DC : 0
|
BS EN 1442 - LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LPG - DESIGN AND CONSTRUCTION |
|
BS EN 124-3 : 2015
|
GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS - PART 3: GULLY TOPS AND MANHOLE TOPS MADE OF STEEL OR ALUMINIUM ALLOYS |
|
BS EN 16767 : 2016
|
INDUSTRIAL VALVES - STEEL AND CAST IRON CHECK VALVES |
|
BS EN 1866-2 : 2014
|
MOBILE FIRE EXTINGUISHERS - PART 2: REQUIREMENTS FOR THE CONSTRUCTION, PRESSURE RESISTANCE AND MECHANICAL TESTS FOR EXTINGUISHERS, WITH A MAXIMUM ALLOWABLE PRESSURE EQUAL TO OR LOWER THAN 30 BAR, WHICH COMPLY WITH THE REQUIREMENTS OF EN 1866-1 |
|
DIN EN ISO 25239-3 E : 2012
|
FRICTION STIR WELDING - ALUMINIUM - PART 3: QUALIFICATION OF WELDING OPERATORS (ISO 25239-3:2011) |
|
17/30351224 DC : 0
|
BS EN 14276-1 - PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 1: VESSELS - GENERAL REQUIREMENTS |
|
DIN EN ISO 15612 : 2016
|
SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - QUALIFICATION BY ADOPTION OF A STANDARD WELDING PROCEDURE |
|
DIN EN ISO 15614-14 : 2013
|
SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 14: LASER-ARC HYBRID WELDING OF STEELS, NICKEL AND NICKEL ALLOYS (ISO 15614-14:2013) |
|
BS EN 593 : 2017
|
INDUSTRIAL VALVES - METALLIC BUTTERFLY VALVES FOR GENERAL PURPOSES |
|
04/30094315 DC : DRAFT FEB 2004
|
BS EN ISO 3834-5 - QUALITY REQUIREMENTS FOR FUSION WELDING OF METALLIC MATERIALS - PART 5: NORMATIVE REFERENCES TO FULFIL THE REQUIREMENTS OF ISO 3834-2, ISO 3834-3 AND ISO 3834-4 |
|
16/30335964 DC : 0
|
BS EN ISO 15612 - SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - QUALIFICATION BY ADOPTION OF A STANDARD WELDING PROCEDURE SPECIFICATION |
|
16/30339483 DC : 0
|
BS EN 593 - INDUSTRIAL VALVES - METALLIC BUTTERFLY VALVES FOR GENERAL PURPOSES |
|
04/30115844 DC : DRAFT JUNE 2004
|
ISO/DIS 20421-1 - CRYOGENIC VESSELS - LARGE TRANSPORTABLE VACUUM INSULATED VESSELS - PART 1: DESIGN, FABRICATION, INSPECTION AND TESTING |
|
BS EN 16617 : 2015
|
PIPEWORK - CORRUGATED METAL HOSE ASSEMBLIES FOR COMBUSTIBLE GAS - PERFORMANCE REQUIREMENTS, TESTING AND MARKING |
|
14/30289473 DC : 0
|
BS EN ISO 15614-12 - SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 12: SPOT, SEAM AND PROJECTION WELDING |
|
00/708224 DC : DRAFT MAY 2000
|
BS EN ISO 15614-10 - SPECIFICATION AND APPROVAL OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 10: HYPERBARIC DRY WELDING |
|
18/30350515 DC : 0
|
BS ISO 20421-1 - CRYOGENIC VESSELS - LARGE TRANSPORTABLE VACUUM-INSULATED VESSELS - PART 1: DESIGN, FABRICATION, INSPECTION AND TESTING |
|
16/30336476 DC : 0
|
BS EN 287-6 - QUALIFICATION TEST OF WELDERS - FUSION WELDING - PART 6: CAST IRON |
|
15/30326251 DC : 0
|
BS EN 13110:2012 AMD 1 - LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED ALUMINIUM CYLINDERS FOR LIQUEFIED PETROLEUM GAS (LPG) - DESIGN AND CONSTRUCTION |
|
DIN EN 16767 : 2016
|
INDUSTRIAL VALVES - STEEL AND CAST IRON CHECK VALVES |
|
04/30127152 DC : DRAFT DEC 2004
|
EN ISO 17660-1 - WELDING - WELDING OF REINFORCING STEEL - PART 1: LOAD BEARING WELDED JOINTS |
|
09/30196132 DC : 0
|
BS ISO 11513 - GAS CYLINDERS - REFILLABLE WELDED STEEL CYLINDERS CONTAINING ABSORBENT MATERIAL FOR SUB-ATMOSPHERIC GAS PACKAGING - DESIGN, CONSTRUCTION AND TESTING |
|
16/30342040 DC : 0
|
BS EN 13941-2 - DISTRICT HEATING PIPES - DESIGN AND INSTALLATION OF THERMAL INSULATED BONDED SINGLE AND TWIN PIPE SYSTEMS FOR DIRECTLY BURIED HOT WATER NETWORKS - PART 2: INSTALLATION |
|
07/30171115 DC : DRAFT AUG 2007
|
BS EN ISO 25239-3 - FRICTION STIR WELDING - ALUMINIUM - PART 3: QUALIFICATION OF WELDING OPERATORS |
|
DIN EN 16767 E : 2016
|
INDUSTRIAL VALVES - STEEL AND CAST IRON CHECK VALVES |
|
07/30127452 DC : DRAFT AUG 2007
|
BS ISO 13628-5 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 5: SUBSEA UMBILICALS |
|
10/30217417 DC : 0
|
BS EN ISO 15614-13 - SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 13: RESISTANCE BUTT (UPSET) AND FLASH WELDING |
|
PREN 10253-4 : DRAFT 2017
|
BUTT-WELDING PIPE FITTINGS - PART 4: WROUGHT AUSTENITIC & AUSTENITIC-FERRITIC (DUPLEX) STAINLESS STEELS WITH SPECIFIC INSPECTION REQUIREMENTS |
|
14/30292703 DC : 0
|
BS EN ISO 3834-5 - QUALITY REQUIREMENTS FOR FUSION WELDING OF METALLIC MATERIALS - PART 5: DOCUMENTS WITH WHICH IT IS NECESSARY TO CONFORM TO CLAIM CONFORMITY TO THE QUALITY REQUIREMENTS OF ISO 3834-2, ISO 3834-3 OR ISO 3834-4 |
|
PREN 12953-4 : DRAFT 2017
|
SHELL BOILERS - PART 4: WORKMANSHIP AND CONSTRUCTION OF PRESSURE PARTS OF THE BOILER |
|
DIN EN 1866-2:2014-07
|
MOBILE FIRE EXTINGUISHERS - PART 2: REQUIREMENTS FOR THE CONSTRUCTION, PRESSURE RESISTANCE AND MECHANICAL TESTS FOR EXTINGUISHERS, WITH A MAXIMUM ALLOWABLE PRESSURE EQUAL TO OR LOWER THAN 30 BAR, WHICH COMPLY WITH THE REQUIREMENTS OF EN 1866-1 |
|
DIN EN 16617 : 2015
|
PIPEWORK - CORRUGATED METAL HOSE ASSEMBLIES FOR COMBUSTIBLE GAS - PERFORMANCE REQUIREMENTS, TESTING AND MARKING |
|
11/30235519 DC : 0
|
BS EN ISO 15614-14 - SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 14: LASER-ARC HYBRID WELDING OF STEELS, NICKEL AND NICKEL ALLOYS |
|
BS ISO 21009-1 : 2008
|
CRYOGENIC VESSELS - STATIC VACUUM-INSULATED VESSELS - PART 1: DESIGN, FABRICATION, INSPECTION AND TESTS |
|
UNE EN 16767 : 2017
|
INDUSTRIAL VALVES - STEEL AND CAST IRON CHECK VALVES |
|
UNE EN 124-3 : 2015
|
GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS - PART 3: GULLY TOPS AND MANHOLE TOPS MADE OF STEEL OR ALUMINIUM ALLOYS |
|
DIN EN 13445-10 E : 2016
|
UNFIRED PRESSURE VESSELS - PART 10: ADDITIONAL REQUIREMENTS FOR PRESSURE VESSELS OF NICKEL AND NICKEL ALLOYS |
|
PREN 593 : DRAFT 2016
|
INDUSTRIAL VALVES - METALLIC BUTTERFLY VALVES FOR GENERAL PURPOSES |
|
PREN 12972 : DRAFT 2017
|
TANKS FOR TRANSPORT OF DANGEROUS GOODS - TESTING, INSPECTION AND MARKING OF METALLIC TANKS |
|
BS EN ISO 15614-14 : 2013
|
SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 14: LASER-ARC HYBRID WELDING OF STEELS, NICKEL AND NICKEL ALLOYS |
|
17/30347443 DC : DRAFT JUN 2017
|
BS EN 12480 - GAS METERS - ROTARY DISPLACEMENT GAS METERS |
|
BS EN ISO 25239-3 : 2011
|
FRICTION STIR WELDING - ALUMINIUM - PART 3: QUALIFICATION OF WELDING OPERATORS (ISO 25239-3:2011) |
|
11/30237996 DC : 0
|
BS ISO 16338 - WELDING FOR AEROSPACE APPLICATIONS - RESISTANCE SPOT AND SEAM WELDING |
|
17/30348961 DC : 0
|
BS EN 12953-4 - SHELL BOILERS - PART 4: WORKMANSHIP AND CONSTRUCTION OF PRESSURE PARTS OF THE BOILER |
|
PREN 1090-2 : DRAFT 2015
|
EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
|
DIN EN 124-3 E : 2015
|
GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS - PART 3: GULLY TOPS AND MANHOLE TOPS MADE OF STEEL OR ALUMINIUM ALLOYS |
|
14/30301577 DC : 0
|
BS EN 16767 - INDUSTRIAL VALVES - STEEL AND CAST IRON CHECK VALVES |
|
BS EN ISO 13628-5 : 2009
|
PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 5: SUBSEA UMBILICALS |
|
BS ISO 13628-5 : 2002
|
PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 5: SUBSEA UMBILICALS |
|
DIN EN 13445-10 : 2016
|
UNFIRED PRESSURE VESSELS - PART 10: ADDITIONAL REQUIREMENTS FOR PRESSURE VESSELS OF NICKEL AND NICKEL ALLOYS |
|
BS ISO 18172-1 : 2007
|
GAS CYLINDERS - REFILLABLE WELDED STAINLESS STEEL CYLINDERS - PART 1: TEST PRESSURE 6 MPA AND BELOW |
|
BS ISO 14661 : 2000
|
THERMAL TURBINES FOR INDUSTRIAL APPLICATIONS (STEAM TURBINES, GAS EXPANSION TURBINES) - GENERAL REQUIREMENTS |
|
PREN 3-8 : DRAFT 2015
|
PORTABLE FIRE EXTINGUISHERS - PART 8: REQUIREMENTS FOR THE CONSTRUCTION, PRESSURE RESISTANCE AND MECHANICAL TESTS FOR EXTINGUISHERS WITH A MAXIMUM ALLOWABLE PRESSURE EQUAL TO OR LOWER THAN 30 BAR, WHICH COMPLY WITH THE REQUIREMENTS OF EN 3-7 |
|
13/30266359 DC : 0
|
BS EN ISO 15614-1 - SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 1: ARC AND GAS WELDING OF STEELS AND ARC WELDING OF NICKEL AND NICKEL ALLOYS |
|
BS EN 13445-10 : 2015
|
UNFIRED PRESSURE VESSELS - PART 10: ADDITIONAL REQUIREMENTS FOR PRESSURE VESSELS OF NICKEL AND NICKEL ALLOYS |
|
PREN 10225-4 : DRAFT 2017
|
WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS - PART 4: COLD FORMED WELDED HOLLOW SECTIONS |
|
06/30153331 DC : DRAFT JULY 2006
|
BS ISO 21009-1 - CRYOGENIC VESSELS - STATIC VACUUM-INSULATED VESSELS - PART 1: DESIGN, FABRICATION, INSPECTION AND TESTS |
|
04/102437 DC : DRAFT JAN 2004
|
ISO 21029-1 - CRYOGENIC VESSELS - TRANSPORTABLE VACUUM INSULATED VESSELS OF NOT MORE THAN 1000 L - PART 1: DESIGN, FABRICATION, INSPECTION AND TESTS |
|
API SPEC 17E : 2017
|
SPECIFICATION FOR SUBSEA UMBILICALS |
|
00/716910 DC : DRAFT NOV 2000
|
BS EN ISO 15614-2 - SPECIFICATION AND APPROVAL OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 2: ARC WELDING OF ALUMINIUM AND ITS ALLOYS |
|
DIN EN 14893 E : 2014
|
LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE LIQUEFIED PETROLEUM GAS (LPG) WELDED STEEL PRESSURE DRUMS WITH A CAPACITY BETWEEN 150 LITRES AND 1000 LITRES |
|
VDMA 24408 : DRAFT 2015
|
LIMIT OF THE SCOPE OF THE EUROPEAN CONSTRUCTION PRODUCTS REGULATION 305/2011/EU WITH RESPECT TO PROCESS PLANT AND AMENDMENTS TO HARMONIZED STANDARDS UNDER THE EUROPEAN PRESSURE EQUIPMENT DIRECTIVE |
|
DIN EN 16617 E : 2015
|
PIPEWORK - CORRUGATED METAL HOSE ASSEMBLIES FOR COMBUSTIBLE GAS - PERFORMANCE REQUIREMENTS, TESTING AND MARKING |
|
I.S. EN 287-6:2010
|
QUALIFICATION TEST OF WELDERS - FUSION WELDING - PART 6: CAST IRON |
|
UNE EN 16617 : 2015
|
PIPEWORK - CORRUGATED METAL HOSE ASSEMBLIES FOR COMBUSTIBLE GAS - PERFORMANCE REQUIREMENTS, TESTING AND MARKING |
|
DIN ISO 16338 E : 2017
|
WELDING FOR AEROSPACE APPLICATIONS - RESISTANCE SPOT AND SEAM WELDING (ISO 16338:2017) |
|
ISO 14661 : 2000
|
THERMAL TURBINES FOR INDUSTRIAL APPLICATIONS (STEAM TURBINES, GAS EXPANSION TURBINES) - GENERAL REQUIREMENTS |
|
DNV/GL-OS-C401 : LATEST
|
FABRICATION AND TESTING OF OFFSHORE STRUCTURES |
|
I.S. EN 1866-2:2014
|
MOBILE FIRE EXTINGUISHERS - PART 2: REQUIREMENTS FOR THE CONSTRUCTION, PRESSURE RESISTANCE AND MECHANICAL TESTS FOR EXTINGUISHERS, WITH A MAXIMUM ALLOWABLE PRESSURE EQUAL TO OR LOWER THAN 30 BAR, WHICH COMPLY WITH THE REQUIREMENTS OF EN 1866-1 |
|
ISO 22991 : 2004(R2018)
|
GAS CYLINDERS - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LIQUEFIED PETROLEUM GAS (LPG) - DESIGN AND CONSTRUCTION |
|
UNE-EN 12972:2015
|
TANKS FOR TRANSPORT OF DANGEROUS GOODS - TESTING, INSPECTION AND MARKING OF METALLIC TANKS |
|
PREN 14276-1 : DRAFT 2017
|
PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 1: VESSELS - GENERAL REQUIREMENTS |
|
BS EN ISO 9606-1 : 2017
|
QUALIFICATION TESTING OF WELDERS - FUSION WELDING - PART 1: STEELS |
|
API 17E REDLINE : 2010
|
SPECIFICATION FOR SUBSEA UMBILICALS |
|
UNE EN 16668 : 2016
|
INDUSTRIAL VALVES - REQUIREMENTS AND TESTING FOR METALLIC VALVES AS PRESSURE ACCESSORIES |
|
PREN ISO 15614-13 : DRAFT 2010
|
SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 13: RESISTANCE BUTT (UPSET) AND FLASH WELDING |
|
I.S. EN 593:2017
|
INDUSTRIAL VALVES - METALLIC BUTTERFLY VALVES FOR GENERAL PURPOSES |
|
KTA 3205.2 : 2015 COR 2016
|
COMPONENT SUPPORT STRUCTURES WITH NON-INTEGRAL CONNECTIONS - PART 2: COMPONENT SUPPORT STRUCTURES WITH NON-INTEGRAL CONNECTIONS FOR PRESSURE AND ACTIVITY-RETAINING COMPONENTS IN SYSTEMS OUTSIDE THE PRIMARY CIRCUIT |
|
I.S. EN ISO 9606-1:2017
|
QUALIFICATION TESTING OF WELDERS - FUSION WELDING - PART 1: STEELS (ISO 9606-1:2012 INCLUDING COR 1:2012 AND COR 2:2013) |
|
18/30368651 DC : 0
|
BS EN 448 - DISTRICT HEATING PIPES - BONDED SINGLE PIPE SYSTEMS FOR DIRECTLY BURIED HOT WATER NETWORKS - FACTORY MADE FITTING ASSEMBLIES OF STEEL SERVICE PIPES, POLYURETHANE THERMAL INSULATION AND A CASING OF POLYETHYLENE |
|
17/30360051 DC : 0
|
BS EN 13611 - SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS |
|
I.S. EN 124-3:2015
|
GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS - PART 3: GULLY TOPS AND MANHOLE TOPS MADE OF STEEL OR ALUMINIUM ALLOYS |
|
I.S. EN 12953-4:2002
|
SHELL BOILERS - PART 4: WORKMANSHIP AND CONSTRUCTION OF PRESSURE PARTS OF THE BOILER |
|
I.S. EN ISO 13628-5:2009
|
PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 5: SUBSEA UMBILICALS |
|
PREN 287-6 : DRAFT 2016
|
QUALIFICATION TEST OF WELDERS - FUSION WELDING - PART 6: CAST IRON |
|
ISO 13847 : 2013
|
PETROLEUM AND NATURAL GAS INDUSTRIES - PIPELINE TRANSPORTATION SYSTEMS - WELDING OF PIPELINES |
|
I.S. EN ISO 15614-1:2017
|
SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 1: ARC AND GAS WELDING OF STEELS AND ARC WELDING OF NICKEL AND NICKEL ALLOYS (ISO 15614-1:2017, CORRECTED VERSION 2017-10-01) |
|
16/30328759 DC : 0
|
BS EN 13814-1 - SAFETY OF AMUSEMENT RIDES AND AMUSEMENT DEVICES - PART 1: DESIGN AND MANUFACTURE |
|
I.S. EN 12972:2015
|
TANKS FOR TRANSPORT OF DANGEROUS GOODS - TESTING, INSPECTION AND MARKING OF METALLIC TANKS |
|
I.S. EN ISO 25239-3:2011
|
FRICTION STIR WELDING - ALUMINIUM - PART 3: QUALIFICATION OF WELDING OPERATORS (ISO 25239-3:2011) |
|
I.S. EN 13445-10:2015
|
UNFIRED PRESSURE VESSELS - PART 10: ADDITIONAL REQUIREMENTS FOR PRESSURE VESSELS OF NICKEL AND NICKEL ALLOYS |
|
SR CWA 16697:2013
|
CAR-ADAPTATIONS FOR DISABLED DRIVERS - REQUIREMENTS, TEST METHODS AND BEST PRACTISE GUIDELINES |
|
ISO 21009-1 : 2008(R2013)
|
CRYOGENIC VESSELS - STATIC VACUUM-INSULATED VESSELS - PART 1: DESIGN, FABRICATION, INSPECTION AND TESTS |
|
NORSOK M 101:2011
|
STRUCTURAL STEEL FABRICATION |
|
I.S. EN 16668:2016
|
INDUSTRIAL VALVES - REQUIREMENTS AND TESTING FOR METALLIC VALVES AS PRESSURE ACCESSORIES |
|
ISO TR 17671-6 : 2005(R2013)
|
WELDING - RECOMMENDATIONS FOR WELDING OF METALLIC MATERIALS - PART 6: LASER BEAM WELDING |
|
I.S. EN 13445-5:2014
|
UNFIRED PRESSURE VESSELS - PART 5: INSPECTION AND TESTING |
|
BS EN 13445-5 : 2014
|
UNFIRED PRESSURE VESSELS - PART 5: INSPECTION AND TESTING |
|
I.S. EN 16617:2015
|
PIPEWORK - CORRUGATED METAL HOSE ASSEMBLIES FOR COMBUSTIBLE GAS - PERFORMANCE REQUIREMENTS, TESTING AND MARKING |
|
ISO 16338 : 2017
|
WELDING FOR AEROSPACE APPLICATIONS - RESISTANCE SPOT AND SEAM WELDING |
|
PREN 448 : DRAFT 2018
|
DISTRICT HEATING PIPES - PREINSULATED BONDED PIPE SYSTEMS FOR DIRECTLY BURIED HOT WATER NETWORKS - FITTING ASSEMBLIES OF STEEL SERVICE PIPES, POLYURETHANE THERMAL INSULATION AND OUTER CASING OF POLYETHYLENE |
|
EN 13445-5 : 2014 COR 2017
|
UNFIRED PRESSURE VESSELS - PART 5: INSPECTION AND TESTING |
|
ISO TR 17671-4 : 2002(R2013)
|
WELDING - RECOMMENDATIONS FOR WELDING OF METALLIC MATERIALS - PART 4: ARC WELDING OF ALUMINIUM AND ALUMINIUM ALLOYS |
|
EN 12972 : 2015
|
TANKS FOR TRANSPORT OF DANGEROUS GOODS - TESTING, INSPECTION AND MARKING OF METALLIC TANKS |
|
UNE EN ISO 15614-14 : 2014
|
SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 14: LASER-ARC HYBRID WELDING OF STEELS, NICKEL AND NICKEL ALLOYS (ISO 15614-14:2013) |
|
BS EN 13611 : 2015
|
SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS |
|
UNI EN 1866-2 : 2014
|
MOBILE FIRE EXTINGUISHERS - PART 2: REQUIREMENTS FOR THE CONSTRUCTION, PRESSURE RESISTANCE AND MECHANICAL TESTS FOR EXTINGUISHERS, WITH A MAXIMUM ALLOWABLE PRESSURE EQUAL TO OR LOWER THAN 30 BAR, WHICH COMPLY WITH THE REQUIREMENTS OF EN 1866-1 |
|
I.S. EN 12493:2013
|
LPG EQUIPMENT AND ACCESSORIES - WELDED STEEL PRESSURE VESSELS FOR LPG ROAD TANKERS - DESIGN AND MANUFACTURE |
|
EN 1092-1 : 2018
|
FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 1: STEEL FLANGES |
|
UNI EN ISO 15612 : 2006
|
SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - QUALIFICATION BY ADOPTION OF A STANDARD WELDING PROCEDURE |
|
BS EN ISO 15614-1:2017+A1:2019
|
SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 1: ARC AND GAS WELDING OF STEELS AND ARC WELDING OF NICKEL AND NICKEL ALLOYS |
|
16/30336547 DC : 0
|
BS EN 16602-70-39 - SPACE PRODUCT ASSURANCE - PART 70-39: WELDING OF METALLIC MATERIALS FOR FLIGHT HARDWARE |
|
I.S. EN ISO 15612:2004
|
SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - QUALIFICATION BY ADOPTION OF A STANDARD WELDING PROCEDURE |
|
UNE-EN 13445-5:2015
|
UNFIRED PRESSURE VESSELS - PART 5: INSPECTION AND TESTING |
|
BS ISO 11513 : 2011
|
GAS CYLINDERS - REFILLABLE WELDED STEEL CYLINDERS CONTAINING MATERIALS FOR SUB-ATMOSPHERIC GAS PACKAGING (EXCLUDING ACETYLENE) - DESIGN, CONSTRUCTION, TESTING, USE AND PERIODIC INSPECTION |
|
BS ISO 20421-1 : 2019
|
CRYOGENIC VESSELS - LARGE TRANSPORTABLE VACUUM-INSULATED VESSELS - PART 1: DESIGN, FABRICATION, INSPECTION AND TESTING |
|
15/30324370 DC : 0
|
BS EN 3-8 - PORTABLE FIRE EXTINGUISHERS - PART 8: REQUIREMENTS FOR THE CONSTRUCTION, PRESSURE RESISTANCE AND MECHANICAL TESTS FOR EXTINGUISHERS WITH A MAXIMUM ALLOWABLE PRESSURE EQUAL TO OR LOWER THAN 30 BAR, WHICH COMPLY WITH THE REQUIREMENTS OF EN 3-7 |
|
15/30320416 DC : 0
|
BS EN 1090-2 - EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
|
16/30334287 DC : 0
|
BS EN 334 - GAS PRESSURE REGULATORS FOR INLET PRESSURE UP TO 100 BAR |
|
17/30362892 DC : 0
|
BS EN 14025 - TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - METALLIC PRESSURE TANKS - DESIGN AND CONSTRUCTION |
|
BS ISO 20421-1 : 2006
|
CRYOGENIC VESSELS - LARGE TRANSPORTABLE VACUUM-INSULATED VESSELS - PART 1: DESIGN, FABRICATION, INSPECTION AND TESTING |
|
UNE-EN ISO 9606-1:2017
|
QUALIFICATION TESTING OF WELDERS - FUSION WELDING - PART 1: STEELS (ISO 9606-1:2012 INCLUDING COR 1:2012 AND COR 2:2013) |
|
I.S. EN ISO 15614-14:2013
|
SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 14: LASER-ARC HYBRID WELDING OF STEELS, NICKEL AND NICKEL ALLOYS (ISO 15614-14:2013) |
|
17/30347088 DC : 0
|
BS EN 10253-2 - BUTT-WELDING PIPE FITTINGS - PART 2: NON ALLOY AND FERRITIC ALLOY STEELS WITH SPECIFIC INSPECTION REQUIREMENTS |
|
17/30346732 DC : 0
|
BS EN 10225-4 - WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS - PART 4: COLD FORMED WELDED HOLLOW SECTIONS |
|
EN 12953-4 : 2018
|
SHELL BOILERS - PART 4: WORKMANSHIP AND CONSTRUCTION OF PRESSURE PARTS OF THE BOILER |
|
17/30360691 DC : 0
|
BS EN 12972 - TANKS FOR TRANSPORT OF DANGEROUS GOODS - TESTING, INSPECTION AND MARKING OF METALLIC TANKS |
|
17/30350291 DC : 0
|
BS EN 14015 - SPECIFICATION FOR THE DESIGN AND MANUFACTURE OF SITE BUILT, VERTICAL, CYLINDRICAL, FLAT-BOTTOMED, ABOVE GROUND, WELDED, STEEL TANKS FOR THE STORAGE OF LIQUIDS AT AMBIENT TEMPERATURE AND ABOVE |
|
UNE-EN 13611:2016
|
SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS |
|
17/30347091 DC : 0
|
BS EN 10253-4 - BUTT-WELDING PIPE FITTINGS - PART 4: WROUGHT AUSTENITIC AND AUSTENITIC-FERRITIC (DUPLEX) STAINLESS STEELS WITH SPECIFIC INSPECTION REQUIREMENTS |
|
DIN EN 13611 : 2016
|
SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS |
|
17/30348949 DC : 0
|
BS EN 1090-3 - EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL REQUIREMENTS FOR ALUMINIUM STRUCTURES |
|
16/30326248 DC : 0
|
BS EN 12542 - LPG EQUIPMENT AND ACCESSORIES - STATIC WELDED STEEL CYLINDRICAL TANKS, SERIALLY PRODUCED FOR THE STORAGE OF LIQUEFIED PETROLEUM GAS (LPG) HAVING A VOLUME NOT GREATER THAN 13 M[3] - DESIGN AND MANUFACTURE |
|
DIN EN 12493 : 2014
|
LPG EQUIPMENT AND ACCESSORIES - WELDED STEEL PRESSURE VESSELS FOR LPG ROAD TANKERS - DESIGN AND MANUFACTURE |
|
EN ISO 15612 : 2004
|
SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - QUALIFICATION BY ADOPTION OF A STANDARD WELDING PROCEDURE |
|
UNE EN 1866-2 : 2015
|
MOBILE FIRE EXTINGUISHERS - PART 2: REQUIREMENTS FOR THE CONSTRUCTION, PRESSURE RESISTANCE AND MECHANICAL TESTS FOR EXTINGUISHERS, WITH A MAXIMUM ALLOWABLE PRESSURE EQUAL TO OR LOWER THAN 30 BAR, WHICH COMPLY WITH THE REQUIREMENTS OF EN 1866-1 |
|
PREN 13611 : DRAFT 2017
|
SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS |
|
BS EN 16668 : 2016
|
INDUSTRIAL VALVES - REQUIREMENTS AND TESTING FOR METALLIC VALVES AS PRESSURE ACCESSORIES |
|
UNI EN ISO 25239-3 : 2012
|
FRICTION STIR WELDING - ALUMINIUM - PART 3: QUALIFICATION OF WELDING OPERATORS |
|
DIN EN 13611 E : 2019
|
Safety and control devices for burners and appliances burning gaseous and/or liquid fuels – General requirements; English version EN 13611:2019, English translation of DIN EN 13611:2019-06 |
|
PREN 12542 : DRAFT 2016
|
LPG EQUIPMENT AND ACCESSORIES - STATIC WELDED STEEL CYLINDRICAL TANKS, SERIALLY PRODUCED FOR THE STORAGE OF LIQUEFIED PETROLEUM GAS (LPG) HAVING A VOLUME NOT GREATER THAN 13 M[3] - DESIGN AND MANUFACTURE |
|
UNI EN ISO 15614-14 : 2013
|
SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 14: LASER-ARC HYBRID WELDING OF STEELS, NICKEL AND NICKEL ALLOYS |
|
ISO 15614-2 : 2005(R2014)
|
SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 2: ARC WELDING OF ALUMINIUM AND ITS ALLOYS |
|
EN 13611 : 2015 COR 2016
|
SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS |
|
DIN EN 13611 E : 2016
|
SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS |
|
EN 12493 : 2013 COR 2015
|
LPG EQUIPMENT AND ACCESSORIES - WELDED STEEL PRESSURE VESSELS FOR LPG ROAD TANKERS - DESIGN AND MANUFACTURE |
|
BS EN 448 : 2015
|
DISTRICT HEATING PIPES - PREINSULATED BONDED PIPE SYSTEMS FOR DIRECTLY BURIED HOT WATER NETWORKS - FITTING ASSEMBLIES OF STEEL SERVICE PIPES, POLYURETHANE THERMAL INSULATION AND OUTER CASING OF POLYETHYLENE |
|
ISO 15614-1 : 2017
|
SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 1: ARC AND GAS WELDING OF STEELS AND ARC WELDING OF NICKEL AND NICKEL ALLOYS |
|
14/30266380 DC : 0
|
BS EN ISO 15614-8 - SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 8: WELDING OF TUBES TO TUBE-PLATE JOINTS |
|
ISO TR 17671-7 : 2004(R2013)
|
WELDING - RECOMMENDATIONS FOR WELDING OF METALLIC MATERIALS - PART 7: ELECTRON BEAM WELDING |
|
UNE EN 13445-10 : 2016
|
UNFIRED PRESSURE VESSELS - PART 10: ADDITIONAL REQUIREMENTS FOR PRESSURE VESSELS OF NICKEL AND NICKEL ALLOYS |
|
I.S. EN 16767:2016
|
INDUSTRIAL VALVES - STEEL AND CAST IRON CHECK VALVES |
|
ISO 21029-1 : 2018
|
CRYOGENIC VESSELS - TRANSPORTABLE VACUUM INSULATED VESSELS OF NOT MORE THAN 1000 LITRES VOLUME - PART 1: DESIGN, FABRICATION, INSPECTION AND TESTS |
|
ISO 11513 : 2011(R2016)
|
GAS CYLINDERS - REFILLABLE WELDED STEEL CYLINDERS CONTAINING MATERIALS FOR SUB-ATMOSPHERIC GAS PACKAGING (EXCLUDING ACETYLENE) - DESIGN, CONSTRUCTION, TESTING, USE AND PERIODIC INSPECTION |
|
UNI EN 13445-5 : 2015
|
UNFIRED PRESSURE VESSELS - PART 5: INSPECTION AND TESTING |
|
I.S. EN 13611:2015
|
SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS |
|
EN 287-6 : 2018
|
QUALIFICATION TEST OF WELDERS - FUSION WELDING - PART 6: CAST IRONS |
|
EN 12480 : 2018
|
GAS METERS - ROTARY DISPLACEMENT GAS METERS |
|
EN ISO 15614-1 : 2017 COR 2018
|
SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 1: ARC AND GAS WELDING OF STEELS AND ARC WELDING OF NICKEL AND NICKEL ALLOYS (ISO 15614-1:2017, CORRECTED VERSION 2017-10-01) |
|
ISO 18172-1 : 2007(R2015)
|
GAS CYLINDERS - REFILLABLE WELDED STAINLESS STEEL CYLINDERS - PART 1: TEST PRESSURE 6 MPA AND BELOW |
|
ISO 15612 : 2004
|
SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - QUALIFICATION BY ADOPTION OF A STANDARD WELDING PROCEDURE |
|
ISO 18172-2 : 2007(R2015)
|
GAS CYLINDERS - REFILLABLE WELDED STAINLESS STEEL CYLINDERS - PART 2: TEST PRESSURE GREATER THAN 6 MPA |
|
ISO 20421-1 : 2006(R2009)
|
CRYOGENIC VESSELS - LARGE TRANSPORTABLE VACUUM-INSULATED VESSELS - PART 1: DESIGN, FABRICATION, INSPECTION AND TESTING |
|
ISO 17842-1 : 2015
|
SAFETY OF AMUSEMENT RIDES AND - AMUSEMENT DEVICES - PART 1: DESIGN AND MANUFACTURE |
|
UNE EN 13480-4 : 2017
|
METALLIC INDUSTRIAL PIPING - PART 4: FABRICATION AND INSTALLATION |
|
BS EN ISO 15614-1 : 2017
|
SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 1: ARC AND GAS WELDING OF STEELS AND ARC WELDING OF NICKEL AND NICKEL ALLOYS |
|
BS EN ISO 15612 : 2004
|
SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - QUALIFICATION BY ADOPTION OF A STANDARD WELDING PROCEDURE |
|
I.S. EN 12480:2018
|
GAS METERS - ROTARY DISPLACEMENT GAS METERS |
|
I.S. EN 1092-1:2007
|
FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES,FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 1: STEEL FLANGES |
|
I.S. EN 13110:2012
|
LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED ALUMINIUM CYLINDERS FOR LIQUEFIED PETROLEUM GAS (LPG) - DESIGN AND CONSTRUCTION |
|
EN 13445-4 : 2014 COR 2017
|
UNFIRED PRESSURE VESSELS - PART 4: FABRICATION |
|
ISO TR 17671-1 : 2002(R2016)
|
WELDING - RECOMMENDATIONS FOR WELDING OF METALLIC MATERIALS - PART 1: GENERAL GUIDANCE FOR ARC WELDING |
|
I.S. EN ISO 15607:2004
|
SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - GENERAL RULES |
|
I.S. EN 13445-4:2014
|
UNFIRED PRESSURE VESSELS - PART 4: FABRICATION |
|
I.S. EN 448:2015
|
DISTRICT HEATING PIPES - PREINSULATED BONDED PIPE SYSTEMS FOR DIRECTLY BURIED HOT WATER NETWORKS - FITTING ASSEMBLIES OF STEEL SERVICE PIPES, POLYURETHANE THERMAL INSULATION AND OUTER CASING OF POLYETHYLENE |
|
EN 14163 : 2001 COR 2006
|
PETROLEUM AND NATURAL GAS INDUSTRIES - PIPELINE TRANSPORTATION SYSTEMS - WELDING OF PIPELINES |
|
DIN EN 13094 : 2015
|
TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - METALLIC TANKS WITH A WORKING PRESSURE NOT EXCEEDING 0,5 BAR - DESIGN AND CONSTRUCTION |
|
DIN EN ISO 15614-2 E : 2005
|
SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 2: ARC WELDING OF ALUMINIUM AND ITS ALLOYS |
|
DIN EN ISO 15614-6 E : 2007
|
SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 6: ARC AND GAS WELDING OF COPPER AND ITS ALLOYS |
|
DIN EN ISO 14554-1 : 2014
|
QUALITY REQUIREMENTS FOR WELDING - RESISTANCE WELDING OF METALLIC MATERIALS - PART 1: COMPREHENSIVE QUALITY REQUIREMENTS (ISO 14554-1:2013) |
|
DIN EN 13110 E : 2017
|
LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED ALUMINIUM CYLINDERS FOR LIQUEFIED PETROLEUM GAS (LPG) - DESIGN AND CONSTRUCTION |
|
DIN EN 1069-2 E : 2017
|
WATER SLIDES - PART 2: INSTRUCTIONS |
|
DIN EN 13110 : 2012
|
LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED ALUMINIUM CYLINDERS FOR LIQUEFIED PETROLEUM GAS (LPG) - DESIGN AND CONSTRUCTION |
|
DIN EN 13094 E : 2015
|
TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - METALLIC TANKS WITH A WORKING PRESSURE NOT EXCEEDING 0,5 BAR - DESIGN AND CONSTRUCTION |
|
DIN EN ISO 15614-12 : 2014
|
SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 12: SPOT, SEAM AND PROJECTION WELDING (ISO 15614-12:2014) |
|
DIN EN 12252 : 2014
|
LPG EQUIPMENT AND ACCESSORIES - EQUIPPING OF LPG ROAD TANKERS |
|
DIN EN ISO 17660-1 : 2006
|
WELDING - WELDING OF REINFORCING STEEL - PART 1: LOAD-BEARING WELDED JOINTS |
|
DIN EN ISO 15614-13 : 2012
|
SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 13: UPSET (RESISTANCE BUTT) AND FLASH WELDING (ISO 15614-13:2012) |
|
DIN EN 1442 : 2008
|
LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LPG - DESIGN AND CONSTRUCTION |
|
DIN EN 12493 E : 2017
|
LPG EQUIPMENT AND ACCESSORIES - WELDED STEEL PRESSURE VESSELS FOR LPG ROAD TANKERS - DESIGN AND MANUFACTURE |
|
DIN EN ISO 14554-1 E : 2014
|
QUALITY REQUIREMENTS FOR WELDING - RESISTANCE WELDING OF METALLIC MATERIALS - PART 1: COMPREHENSIVE QUALITY REQUIREMENTS (ISO 14554-1:2013) |
|
DIN EN 14140 E : 2017
|
LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LPG - ALTERNATIVE DESIGN AND CONSTRUCTION |
|
DIN EN ISO 15607 E : 2004
|
SPECIFICATION AND QUALIFICATION OF WELDING - PROCEDURES FOR METALLIC MATERIALS - GENERAL RULES |
|
DIN EN 12972 : 2015
|
TANKS FOR TRANSPORT OF DANGEROUS GOODS - TESTING, INSPECTION AND MARKING OF METALLIC TANKS |
|
DIN EN ISO 3834-5 : 2015
|
QUALITY REQUIREMENTS FOR FUSION WELDING OF METALLIC MATERIALS - PART 5: DOCUMENTS WITH WHICH IT IS NECESSARY TO CONFORM TO CLAIM CONFORMITY TO THE QUALITY REQUIREMENTS OF ISO 3834-2, ISO 3834-3 OR ISO 3834-4 (ISO 3834-5:2015) |
|
DIN EN 448 E : 2016
|
DISTRICT HEATING PIPES - PREINSULATED BONDED PIPE SYSTEMS FOR DIRECTLY BURIED HOT WATER NETWORKS - FITTING ASSEMBLIES OF STEEL SERVICE PIPES, POLYURETHANE THERMAL INSULATION AND OUTER CASING OF POLYETHYLENE |
|
DIN EN 12252 E : 2000
|
LPG EQUIPMENT AND ACCESSORIES - EQUIPPING OF LPG ROAD TANKERS |
|
DIN EN 1069-2 : 2015
|
WATER SLIDES - PART 2: INSTRUCTIONS |
|
DIN EN ISO 15612 E : 2004
|
SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - QUALIFICATION BY ADOPTION OF A STANDARD WELDING PROCEDURE |
|
DIN EN ISO 9606-2 : 2005-03
|
QUALIFICATION TEST OF WELDERS - FUSION WELDING - PART 2: ALUMINIUM AND ALUMINIUM ALLOYS |
|
DIN EN 12972 E : 2015
|
TANKS FOR TRANSPORT OF DANGEROUS GOODS - TESTING, INSPECTION AND MARKING OF METALLIC TANKS |
|
DIN EN ISO 17660-1 E : 2006
|
WELDING - WELDING OF REINFORCING STEEL - PART 1: LOAD-BEARING WELDED JOINTS |
|
DIN EN ISO 15607 : 2004
|
SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - GENERAL RULES |
|
DIN EN 448 : 2016
|
DISTRICT HEATING PIPES - PREINSULATED BONDED PIPE SYSTEMS FOR DIRECTLY BURIED HOT WATER NETWORKS - FITTING ASSEMBLIES OF STEEL SERVICE PIPES, POLYURETHANE THERMAL INSULATION AND OUTER CASING OF POLYETHYLENE |
|
DIN EN 14140 : 2015
|
LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LPG - ALTERNATIVE DESIGN AND CONSTRUCTION |
|
DIN EN ISO 15614-6 : 2007
|
SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 6: ARC AND GAS WELDING OF COPPER AND ITS ALLOYS |
|
DIN EN ISO 14555 E : 2017
|
WELDING - ARC STUD WELDING OF METALLIC MATERIALS (ISO 14555:2017) |
|
DIN EN ISO 15614-2 : 2005
|
SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 2: ARC WELDING OF ALUMINIUM AND ITS ALLOYS |
|
DIN EN ISO 15614-13 E : 2012
|
SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 13: UPSET (RESISTANCE BUTT) AND FLASH WELDING (ISO 15614-13:2012) |
|
DIN EN 1442 E : 2008
|
LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LPG - DESIGN AND CONSTRUCTION |
|
DIN EN ISO 9606-2 E : 2005
|
QUALIFICATION TESTING OF WELDERS - FUSION WELDING - PART 2: ALUMINIUM AND ALUMINIUM ALLOYS |
|
BS EN ISO 14554-2 : 2013
|
QUALITY REQUIREMENTS FOR WELDING - RESISTANCE WELDING OF METALLIC MATERIALS - PART 2: ELEMENTARY QUALITY REQUIREMENTS |
|
BS EN 13445-4 : 2014
|
UNFIRED PRESSURE VESSELS - PART 4: FABRICATION |
|
ISO 9606-2 : 2004(R2014)
|
QUALIFICATION TEST OF WELDERS - FUSION WELDING - PART 2: ALUMINIUM AND ALUMINIUM ALLOYS |
|
BS EN ISO 17660-1 : 2006
|
WELDING - WELDING OF REINFORCING STEEL - PART 1: LOAD-BEARING WELDED JOINTS |
|
BS EN ISO 15614-6 : 2006
|
SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 6: ARC AND GAS WELDING OF COPPER AND ITS ALLOYS |
|
UNE-EN 1069-2:2017
|
WATER SLIDES - PART 2: INSTRUCTIONS |
|
UNE-EN 14140:2015
|
LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LPG - ALTERNATIVE DESIGN AND CONSTRUCTION |
|
17/30337995 DC : DRAFT MAY 2017
|
BS ISO 24394 - WELDING FOR AEROSPACE APPLICATIONS - QUALIFICATION TEST FOR WELDERS AND WELDING OPERATORS - FUSION WELDING OF METALLIC COMPONENTS |
|
BS EN 14163 : 2001
|
PETROLEUM AND NATURAL GAS INDUSTRIES - PIPELINE TRANSPORTATION SYSTEMS - WELDING OF PIPELINES |
|
BS EN 1069-2 : 2017
|
WATER SLIDES - PART 2: INSTRUCTIONS |
|
ISO 15614-14 : 2013(R2018)
|
SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 14: LASER-ARC HYBRID WELDING OF STEELS, NICKEL AND NICKEL ALLOYS |
|
EN 16767 : 2016
|
INDUSTRIAL VALVES - STEEL AND CAST IRON CHECK VALVES |
|
BS EN 12972 : 2015
|
TANKS FOR TRANSPORT OF DANGEROUS GOODS - TESTING, INSPECTION AND MARKING OF METALLIC TANKS |
|
BS EN ISO 15614-12 : 2014
|
SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 12: SPOT, SEAM AND PROJECTION WELDING |
|
BS EN 12252 : 2014
|
LPG EQUIPMENT AND ACCESSORIES - EQUIPPING OF LPG ROAD TANKERS |
|
UNE EN ISO 3834-5 : 2015
|
QUALITY REQUIREMENTS FOR FUSION WELDING OF METALLIC MATERIALS - PART 5: DOCUMENTS WITH WHICH IT IS NECESSARY TO CONFORM TO CLAIM CONFORMITY TO THE QUALITY REQUIREMENTS OF ISO 3834-2, ISO 3834-3 OR ISO 3834-4 (ISO 3834-5:2015) |
|
UNE-EN ISO 14555:2017
|
WELDING - ARC STUD WELDING OF METALLIC MATERIALS (ISO 14555:2017) |
|
UNE-EN 593:2009
|
INDUSTRIAL VALVES - METALLIC BUTTERFLY VALVES FOR GENERAL PURPOSES |
|
DIN EN 14893 : 2014
|
LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE LIQUEFIED PETROLEUM GAS (LPG) WELDED STEEL PRESSURE DRUMS WITH A CAPACITY BETWEEN 150 LITRES AND 1000 LITRES |
|
14/30278953 DC : 0
|
BS ISO 17842-1 - SAFETY OF AMUSEMENT RIDES AND AMUSEMENT DEVICES - PART 1: DESIGN AND MANUFACTURE |
|
ISO 14554-1 : 2013(R2018)
|
QUALITY REQUIREMENTS FOR WELDING - RESISTANCE WELDING OF METALLIC MATERIALS - PART 1: COMPREHENSIVE QUALITY REQUIREMENTS |
|
BS EN 13094 : 2015
|
TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - METALLIC TANKS WITH A WORKING PRESSURE NOT EXCEEDING 0,5 BAR - DESIGN AND CONSTRUCTION |
|
BS EN 14893 : 2014
|
LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE LIQUEFIED PETROLEUM GAS (LPG) WELDED STEEL PRESSURE DRUMS WITH A CAPACITY BETWEEN 150 LITRES AND 1000 LITRES |
|
BS EN ISO 15614-13 : 2012
|
SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 13: UPSET (RESISTANCE BUTT) AND FLASH WELDING (ISO 15614-13:2012) |
|
ISO 15614-8 : 2016
|
SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 8: WELDING OF TUBES TO TUBE-PLATE JOINTS |
|
BS EN ISO 3834-5 : 2015
|
QUALITY REQUIREMENTS FOR FUSION WELDING OF METALLIC MATERIALS - PART 5: DOCUMENTS WITH WHICH IT IS NECESSARY TO CONFORM TO CLAIM CONFORMITY TO THE QUALITY REQUIREMENTS OF ISO 3834-2, ISO 3834-3 OR ISO 3834-4 |
|
ISO 14554-2 : 2013(R2018)
|
QUALITY REQUIREMENTS FOR WELDING - RESISTANCE WELDING OF METALLIC MATERIALS - PART 2: ELEMENTARY QUALITY REQUIREMENTS |
|
BS EN 13110 : 2012
|
LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED ALUMINIUM CYLINDERS FOR LIQUEFIED PETROLEUM GAS (LPG) - DESIGN AND CONSTRUCTION |
|
BS ISO 17842-1 : 2015
|
SAFETY OF AMUSEMENT RIDES AND AMUSEMENT DEVICES - PART 1: DESIGN AND MANUFACTURE |
|
ISO 15607 : 2003
|
SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - GENERAL RULES |
|
ISO 14555 : 2017
|
WELDING - ARC STUD WELDING OF METALLIC MATERIALS |
|
ISO 15614-13 : 2012(R2017)
|
SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 13: UPSET (RESISTANCE BUTT) AND FLASH WELDING |
|
ISO 15614-6 : 2006(R2014)
|
SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 6: ARC AND GAS WELDING OF COPPER AND ITS ALLOYS |
|
BS EN 13480-4 : 2017
|
METALLIC INDUSTRIAL PIPING - PART 4: FABRICATION AND INSTALLATION |
|
BS EN 14140 : 2014
|
LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LPG - ALTERNATIVE DESIGN AND CONSTRUCTION |
|
UNE EN ISO 15614-8 : 2016
|
SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 8: WELDING OF TUBES TO TUBE-PLATE JOINTS (ISO 15614-8:2016) |
|
ISO 17660-1 : 2006(R2010)
|
WELDING - WELDING OF REINFORCING STEEL - PART 1: LOAD-BEARING WELDED JOINTS |
|
UNE-EN 13480-4:2017
|
METALLIC INDUSTRIAL PIPING - PART 4: FABRICATION AND INSTALLATION |
|
ISO 15614-12 : 2014
|
SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 12: SPOT, SEAM AND PROJECTION WELDING |
|
UNE EN ISO 15614-13 : 2013
|
SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 13: UPSET (RESISTANCE BUTT) AND FLASH WELDING (ISO 15614-13:2012) |
|
DIN EN ISO 3834-5 E : 2015
|
QUALITY REQUIREMENTS FOR FUSION WELDING OF METALLIC MATERIALS - PART 5: DOCUMENTS WITH WHICH IT IS NECESSARY TO CONFORM TO CLAIM CONFORMITY TO THE QUALITY REQUIREMENTS OF ISO 3834-2, ISO 3834-3 OR ISO 3834-4 (ISO 3834-5:2015) |
|
ISO 3834-5 : 2015
|
QUALITY REQUIREMENTS FOR FUSION WELDING OF METALLIC MATERIALS - PART 5: DOCUMENTS WITH WHICH IT IS NECESSARY TO CONFORM TO CLAIM CONFORMITY TO THE QUALITY REQUIREMENTS OF ISO 3834-2, ISO 3834-3 OR ISO 3834-4 |
|
BS EN ISO 15607 : 2003
|
SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - GENERAL RULES |
|
ISO 25239-3 : 2011(R2019)
|
FRICTION STIR WELDING - ALUMINIUM - PART 3: QUALIFICATION OF WELDING OPERATORS |
|
BS EN ISO 15614-2 : 2005
|
SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 2: ARC WELDING OF ALUMINIUM AND ITS ALLOYS |
|
ISO 13628-5 : 2009(R2015)
|
PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 5: SUBSEA UMBILICALS |
|
UNE EN 13110 : 2012
|
LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED ALUMINIUM CYLINDERS FOR LIQUEFIED PETROLEUM GAS (LPG) - DESIGN AND CONSTRUCTION |
|
UNE-EN 13094:2015
|
TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - METALLIC TANKS WITH A WORKING PRESSURE NOT EXCEEDING 0,5 BAR - DESIGN AND CONSTRUCTION |
|
UNE-EN 1442:2017
|
LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LPG - DESIGN AND CONSTRUCTION |
|
DIN EN ISO 14555 : 2017-10
|
WELDING - ARC STUD WELDING OF METALLIC MATERIALS (ISO 14555:2017) |
|
BS EN 1442 : 2006
|
LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LPG - DESIGN AND CONSTRUCTION |
|
UNE EN 13110 : 2012 : INC : AMD 1 : 2017
|
LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED ALUMINIUM CYLINDERS FOR LIQUEFIED PETROLEUM GAS (LPG) - DESIGN AND CONSTRUCTION |
|
BS EN ISO 14554-1 : 2013
|
QUALITY REQUIREMENTS FOR WELDING - RESISTANCE WELDING OF METALLIC MATERIALS - PART 1: COMPREHENSIVE QUALITY REQUIREMENTS |
|
UNE EN ISO 15614-12 : 2015
|
SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 12: SPOT, SEAM AND PROJECTION WELDING (ISO 15614-12:2014) |
|
UNE-EN 13110:2012+A1:2017
|
LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED ALUMINIUM CYLINDERS FOR LIQUEFIED PETROLEUM GAS (LPG) - DESIGN AND CONSTRUCTION |
|
UNE EN 448 : 2017
|
DISTRICT HEATING PIPES - PREINSULATED BONDED PIPE SYSTEMS FOR DIRECTLY BURIED HOT WATER NETWORKS - FITTING ASSEMBLIES OF STEEL SERVICE PIPES, POLYURETHANE THERMAL INSULATION AND OUTER CASING OF POLYETHYLENE |
|
BS EN ISO 15614-8 : 2016
|
SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 8: WELDING OF TUBES TO TUBE-PLATE JOINTS (ISO 15614-8:2016) |
|
BS EN ISO 14555 : 2017
|
WELDING - ARC STUD WELDING OF METALLIC MATERIALS |
|
ISO 9606-1 : 2012(R2016)
|
QUALIFICATION TESTING OF WELDERS - FUSION WELDING - PART 1: STEELS |
|
EN ISO 25239-3 : 2011
|
FRICTION STIR WELDING - ALUMINIUM - PART 3: QUALIFICATION OF WELDING OPERATORS (ISO 25239-3:2011) |
|
EN 13094 : 2015
|
TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - METALLIC TANKS WITH A WORKING PRESSURE NOT EXCEEDING 0,5 BAR - DESIGN AND CONSTRUCTION |
|
I.S. EN 13094:2015
|
TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - METALLIC TANKS WITH A WORKING PRESSURE NOT EXCEEDING 0,5 BAR - DESIGN AND CONSTRUCTION |
|
UNE-EN 13445-4:2015
|
UNFIRED PRESSURE VESSELS - PART 4: FABRICATION |
|
ONORM EN 12493 : 2015
|
LPG EQUIPMENT AND ACCESSORIES - WELDED STEEL PRESSURE VESSELS FOR LPG ROAD TANKERS - DESIGN AND MANUFACTURE |