ISO 1629:2013
Current
Current
The latest, up-to-date edition.
Rubber and latices — Nomenclature
Available format(s)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
English, French, Russian
Published date
13-06-2013
ISO 1629:2013 establishes a system of symbols for the basic rubbers in both dry and latex forms, based on the chemical composition of the polymer chain. The purpose is to standardize the abbreviated terms used in industry, commerce and government, and it is not intended to conflict with, but rather to act as a supplement to, existing trade names and trademarks.
| Committee |
ISO/TC 45
|
| DevelopmentNote |
Supersedes ISO/DIS 1629. (06/2013)
|
| DocumentType |
Standard
|
| Pages |
6
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| BS ISO 1629:2013 | Identical |
| UNE-ISO 1629:2017 | Identical |
| PN ISO 1629 : 2017 | Identical |
| NF ISO 1629 : 2013 | Identical |
| DIN ISO 1629:2015-03 | Identical |
| SS-ISO 1629 : 2013 | Identical |
| NEN ISO 1629 : 2013 | Identical |
| 06/30149707 DC : DRAFT MAY 2006 | Identical |
| NBN E 48 113 : 1988 | Identical |
| BS 3502-3:1978 | Identical |
| ISO 7745:2010 | Hydraulic fluid power — Fire-resistant (FR) fluids — Requirements and guidelines for use |
| I.S. EN 2848:2013 | AEROSPACE SERIES - ACRYLONITRILE-BUTADIENE RUBBER (NBR) - FUEL AND SYNTHETIC OIL RESISTANT - HARDNESS 80 IRHD |
| I.S. EN 2846:2013 | AEROSPACE SERIES - ACRYLONITRILE-BUTADIENE RUBBER (NBR) - FUEL AND SYNTHETIC OIL RESISTANT - HARDNESS 60 IRHD |
| 08/30191997 DC : 0 | BS ISO 1043-1 - PLASTICS - SYMBOLS AND ABBREVIATED TERMS - PART 1: BASIC POLYMERS AND THEIR SPECIAL CHARACTERISTICS |
| ISO 4650:2012 | Rubber — Identification — Infrared spectrometric methods |
| BS ISO 9924-3:2009 | Rubber and rubber products. Determination of the composition of vulcanizates and uncured compounds by thermogravimetry Hydrocarbon rubbers, halogenated rubbers and polysiloxane rubbers after extraction |
| DIN EN 16821:2015-03 (Draft) | RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES FOR USE IN THE PHARMACEUTICAL AND BIOTECHNOLOGICAL INDUSTRY - SILICONE RUBBER HOSES |
| BS EN 2845:2013 | Aerospace series. Acrylonitrile-butadiene rubber (NBR). Fuel and synthetic oil resistant. Hardness 50 IRHD |
| 99/123581 DC : DRAFT OCT 1999 | ISO/DIS 4633 - RUBBER SEALS - JOINT RINGS FOR WATER SUPPLY, DRAINAGE AND SEWERAGE PIPELINES - SPECIFICATION FOR MATERIALS |
| BS EN 2842:2013 | Aerospace series. Acrylonitrile-butadiene rubber (NBR). Mineral oil resistant. Hardness 70 IRHD |
| 11/30242391 DC : 0 | BS EN 2839 - HEAT RESISTANT POLYCHLOROPRENE RUBBER (CR) - HARDNESS GRADE 80 - CHARACTERISTICS |
| 98/706004 DC : DRAFT APR 1998 | ISO/CD 3601-6 - FLUID SYSTEMS - SEALING DEVICES - O-RINGS - PART 6: RECOMMENDED ELASTOMERIC MATERIALS |
| BS ISO 17324:2014 | Rubber hoses for automotive turbochargers. Specification |
| EN ISO 18797-1:2017 | Petroleum, petrochemical and natural gas industries - External corrosion protection of risers by coatings and linings - Part 1: Elastomeric coating systems-polychloroprene or EPDM (ISO 18797-1:2016) |
| ISO 247:2006 | Rubber Determination of ash |
| DIN ISO 2028:2004-04 | SYNTHETIC RUBBER LATEX - PREPARATION OF DRY POLYMER |
| BS EN 62474:2012 | Material declaration for products of and for the electrotechnical industry |
| 01/122077 DC : DRAFT JUNE 2001 | ISO/DIS 18064 - THERMOPLASTIC ELASTOMERS - CLASSIFICATION AND NOMENCLATURE |
| BS 7164-5:1991 | Chemical tests for raw and vulcanized rubber Methods for determination of ash content |
| 05/19991670 DC : 0 | EN 3826 - AEROSPACE SERIES - FLUOROSILICONE RUBBER (FVMQ) - HARDNESS 70 IRHD |
| BIS IS/ISO 7388-3 : 2007 | TOOL SHANKS WITH 7/24 TAPER FOR AUTOMATIC TOOL CHANGERS - PART 3: RETENTION KNOBS FOR SHANKS OF FORMS AC, AD, AF, UC, UD, UF, JD AND JF |
| DIN 73379-1:1997-11 | FUEL HOSES - PART 1: DIMENSIONS, MATERIAL, MARKING |
| DIN 9088:2002-11 | AEROSPACE SERIES - STORAGE LIFE OF RUBBER PRODUCTS |
| 11/30242387 DC : 0 | BS EN 2836 - HEAT RESISTANT POLYCHLOROPRENE RUBBER (CR) - HARDNESS GRADE 50 - CHARACTERISTICS |
| 15/30320874 DC : 0 | BS EN 2566 - AEROSPACE SERIES - FLUOROCARBON RUBBER (FPM) - HARDNESS 70 IRHD |
| UNI EN 3698 : 2013 | AEROSPACE SERIES - ACRYLONITRILE-BUTADIENE RUBBER (NBR) - LOW TEMPERATURE RESISTANT - HARDNESS 70 IRHD |
| DIN 16966-1:1988-11 | PIPE JOINTS AND THEIR ELEMENTS OF GLASS FIBRE REINFORCED RESINS - FITTINGS - GENERAL QUALITY REQUIREMENTS AND TEST METHODS |
| NF ISO 248-1 : 2011 | RUBBER, RAW - DETERMINATION OF VOLATILE-MATTER CONTENT - PART 1: HOT-MILL METHOD AND OVEN METHOD |
| 16/30340979 DC : 0 | BS EN 2567 - AEROSPACE SERIES - FLUOROCARBON RUBBER (FPM) - HARDNESS 80 IRHD |
| BS EN 3827:2014 | Aerospace series. Fluorosilicone rubber (FVMQ). Hardness 80 IRHD |
| BS EN 2837:2012 | Aerospace series. Chloroprene rubber (CR). Heat resistance. Hardness 60 IRHD |
| BS EN 2836:2012 | Aerospace series. Chloroprene rubber (CR). Heat resistance. Hardness 50 IRHD |
| BS EN 2847:2013 | Aerospace series. Acrylonitrile-butadiene rubber (NBR). Fuel and synthetic oil resistant. Hardness 70 IRHD |
| 06/30146125 DC : 0 | EN 12115 - RUBBER AND THERMOPLASTICS HOSES AND HOSE ASSEMBLIES FOR LIQUID OR GASEOUS CHEMICALS - SPECIFICATION |
| 13/30276381 DC : 0 | BS ISO 3601-5 - FLUID POWER SYSTEMS - O-RINGS - PART 5: SPECIFICATION OF ELASTOMERIC MATERIALS FOR INDUSTRIAL APPLICATIONS |
| 05/30032019 DC : DRAFT SEP 2005 | ISO 6194-1 - ROTARY SHAFT LIP TYPE SEALS INCORPORATING ELASTOMERIC SEALING ELEMENTS - PART 1: NOMINAL DIMENSIONS AND TOLERANCES |
| 11/30242407 DC : 0 | BS EN 2849 - FUEL AND SYNTHETIC OIL RESISTANT ACRYLONITRILE-BUTADIENERUBBER (NBR) - HARDNESS GRADE - CHARACTERISTICS |
| UNE-EN 16767:2017 | Industrial valves - Steel and cast iron check valves |
| 15/30278562 DC : 0 | BS ISO 18797-1 - PETROLEUM, PETROCHEMICALS AND NATURAL GAS INDUSTRIES - EXTERNAL CORROSION PROTECTION OF RISERS BY COATINGS AND LININGS - PART 1: ELASTOMERIC COATING SYSTEMS - POLYCHLOROPRENE OR EPDM |
| BS EN 2843:2013 | Aerospace series. Acrylonitrile-butadiene rubber (NBR). Mineral oil resistant. Hardness 80 IRHD |
| BS EN 2839:2013 | Aerospace series. Chloroprene rubber (CR). Heat resistance. Hardness 80 IRHD |
| 14/30301577 DC : 0 | BS EN 16767 - INDUSTRIAL VALVES - STEEL AND CAST IRON CHECK VALVES |
| 08/30187521 DC : 0 | BS EN 593 - INDUSTRIAL VALVES - METALLIC BUTTERFLY VALVES |
| BS ISO 9631:2018 | Rubber seals. Joint rings for pipelines for hot-water supply up to 110 °C. Specification for the material |
| BS ISO 2475:2011 | Chloroprene rubber (CR). General-purpose types. Evaluation procedure |
| 04/300394 DC : DRAFT JAN 2004 | IEC 61906 ED.1 - PROCEDURE FOR DECLARATION OF MATERIALS IN PRODUCTS OF THE ELECTROTECHNICAL AND ELECTRONICS INDUSTRY (DIN 19220 |
| PREN 2837 : 200P1 | AEROSPACE SERIES - CHLOROPRENE RUBBER (CR) - HEAT RESISTANCE - HARDNESS 60 IRHD |
| PREN 2846 : 200P1 | AEROSPACE SERIES - ACRYLONITRILE-BUTADIENE RUBBER (NBR) - FUEL AND SYNTHETIC OIL RESISTANT - HARDNESS 60 IRHD |
| PREN 2567 : 200P1 | AEROSPACE SERIES - FLUOROCARBON RUBBER (FPM) - HARDNESS 80 IRHD |
| DIN ISO 7388-3:2015-03 | TOOL SHANKS WITH 7/24 TAPER FOR AUTOMATIC TOOL CHANGERS - PART 3: RETENTION KNOBS FOR SHANKS OF FORMS AC, AD, AF, UC, UD, UF, JD AND JF (ISO 7388-3:2013) |
| UNE-ISO 2230:2012 | Rubber products. Guidelines for storage |
| PREN 2796 : 200P1 | AEROSPACE SERIES - FLUOROCARBON RUBBER (FPM) - LOW COMPRESSION SET - HARDNESS 60 IRHD |
| PREN 2568 : 200P1 | AEROSPACE SERIES - FLUOROCARBON RUBBER (FPM) - HARDNESS 90 IRHD |
| PREN 2795 : 200P1 | AEROSPACE SERIES - FLUOROCARBON RUBBER (FPM) - LOW COMPRESSION SET - HARDNESS 50 IRHD |
| PREN 2836 : 200P1 | AEROSPACE SERIES - CHLOROPRENE RUBBER (CR) - HEAT RESISTANCE - HARDNESS 50 IRHD |
| PREN 2843 : 200P1 | AEROSPACE SERIES - ACRYLONITRILE-BUTADIENE RUBBER (NBR) - MINERAL OIL RESISTANT - HARDNESS 80 IRHD |
| PREN 2847 : 200P1 | AEROSPACE SERIES - ACRYLONITRILE-BUTADIENE RUBBER (NBR) - FUEL AND SYNTHETIC OIL RESISTANT - HARDNESS 70 IRHD |
| ISO 6072:2011 | Rubber Compatibility between hydraulic fluids and standard elastomeric materials |
| PREN 3826 : DRAFT 2006 | AEROSPACE SERIES - FLUOROSILICONE RUBBER (FVMQ) - HARDNESS 70 IRHD |
| PREN 2845 : 200P1 | AEROSPACE SERIES - ACRYLONITRILE-BUTADIENE RUBBER (NBR) - FUEL AND SYNTHETIC OIL RESISTANT - HARDNESS 50 IRHD |
| PREN 3698 : 200P1 | AEROSPACE SERIES - ACRYLONITRILE-BUTADIENE RUBBER (NBR) - LOW TEMPERATURE RESISTANT - HARDNESS 70 IRHD |
| PREN 2841 : 200P1 | AEROSPACE SERIES - ACRYLONITRILE-BUTADIENE RUBBER (NBR) - MINERAL OIL RESISTANT - HARDNESS 60 IRHD |
| PREN 2840 : 200P1 | AEROSPACE SERIES - ACRYLONITRILE-BUTADIENE RUBBER (NBR) - MINERAL OIL RESISTANT - HARDNESS 50 IRHD |
| PREN 4440 : DRAFT 1997 | AEROSPACE SERIES - RUBBER PANELS AND CALENDERED SHEETS DIMENSIONS |
| TR 7000-2 : 1 | AEROSPACE SERIES - NON-METALLIC MATERIALS - RULES FOR THE DRAFTING AND PRESENTATION OF MATERIAL STANDARDS - PART 2: RUBBERS |
| I.S. EN ISO 18797-1:2017 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - EXTERNAL CORROSION PROTECTION OF RISERS BY COATINGS AND LININGS - PART 1: ELASTOMERIC COATING SYSTEMS-POLYCHLOROPRENE OR EPDM (ISO 18797-1:2016) |
| ISO 1043-1:2011 | Plastics — Symbols and abbreviated terms — Part 1: Basic polymers and their special characteristics |
| UNE-ISO 1407:2012 | Rubber. Determination of solvent extract |
| BS ISO 7270-1 : 2003 | RUBBER - ANALYSIS BY PYROLYTIC GAS-CHROMATOGRAPHIC METHODS - PART 1: IDENTIFICATION OF POLYMERS (SINGLE POLYMERS AND POLYMER BLENDS) |
| ISO 10889-1:2004 | Tool holders with cylindrical shank Part 1: Cylindrical shank, location bore Technical delivery conditions |
| ISO 15171-2:2016 | Connections for fluid power and general use Hydraulic couplings for diagnostic purposes Part 2: Coupling with M16 x 2 end for connection under pressure |
| BS ISO 248-2:2012 | Rubber, raw. Determination of volatile-matter content Thermogravimetric methods using an automatic analyser with an infrared drying unit |
| BS ISO 3601-1:2012 | Fluid power systems. O-rings Inside diameters, cross-sections, tolerances and designation codes |
| ISO 19013-1:2005 | Rubber hoses and tubing for fuel circuits for internal combustion engines Specification Part 1: Diesel fuels |
| CSA C22.2 No. 0.17 : 2000 | EVALUATION OF PROPERTIES OF POLYMERIC MATERIALS |
| ISO 7986:1997 | Hydraulic fluid power — Sealing devices — Standard test methods to assess the performance of seals used in oil hydraulic reciprocating applications |
| DIN EN ISO 18064:2015-03 | THERMOPLASTIC ELASTOMERS - NOMENCLATURE AND ABBREVIATED TERMS (ISO18064:2014) |
| BS EN 14879-2:2006 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media Coatings on metallic components |
| BS EN 681-1:1996 | Elastomeric seals. Material requirements for pipe joint seals used in water and drainage applications Vulcanized rubber |
| BS EN 12351:2010 | Industrial valves. Protective caps for valves with flanged connections |
| BS EN 12756:2001 | Mechanical seals. Principal dimensions, designation and material codes |
| DIN EN 14483-2:2004-09 | VITREOUS AND PORCELAIN ENAMELS - DETERMINATION OF RESISTANCE TO CHEMICAL CORROSION - PART 2: DETERMINATION OF RESISTANCE TO CHEMICAL CORROSION BY BOILING ACIDS, NEUTRAL LIQUIDS AND/OR THEIR VAPOURS |
| DIN EN 14879-4:2008-01 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 4: Linings on metallic components |
| DIN EN 14879-2:2007-02 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 2: Coatings on metallic components |
| ANSI/AWWA E200:2023 | Progressive Cavity Chemical Metering Pumps |
| ISO 16589-1:2011 | Rotary shaft lip-type seals incorporating thermoplastic sealing elements — Part 1: Nominal dimensions and tolerances |
| DIN EN 16767 E : 2016 | INDUSTRIAL VALVES - STEEL AND CAST IRON CHECK VALVES |
| BS ISO 7388-3:2016 | Tool shanks with 7/24 taper for automatic tool changers Retention knobs of forms AD, AF, UD, UF, JD and JF |
| DIN EN 61518:2002-06 | MATING DIMENSIONS BETWEEN DIFFERENTIAL PRESSURE (TYPE) MEASURING INSTRUMENTS AND FLANGED-ON SHUT-OFF DEVICES UP TO 413 BAR (41,3 MPA) |
| UNE-EN ISO 28706-2:2017 | Vitreous and porcelain enamels - Determination of resistance to chemical corrosion - Part 2: Determination of resistance to chemical corrosion by boiling acids, boiling neutral liquids, alkaline liquids and/or their vapours (ISO 28706-2:2017) |
| I.S. EN 2838:2013 | AEROSPACE SERIES - CHLOROPRENE RUBBER (CR) - HEAT RESISTANCE - HARDNESS 70 IRHD |
| 17/30351090 DC : 0 | BS ISO 247-2 - RUBBER - DETERMINATION OF ASH - PART 2: THERMOGRAVIMETRIC ANALYSIS (TGA) |
| BS EN 2848:2013 | Aerospace series. Acrylonitrile-butadiene rubber (NBR). Fuel and synthetic oil resistant. Hardness 80 IRHD |
| 11/30242392 DC : 0 | BS EN 2840 - MINERAL OIL RESISTANT ACRYLONITRILE-BUTADIENE RUBBER (NBR) - HARDNESS GRADE 50 - CHARACTERISTICS |
| UNI ISO 4650 : 2013 | RUBBER - IDENTIFICATION - INFRARED SPECTROMETRIC METHODS |
| BS ISO 3601-5:2015 | Fluid power systems. O-rings Specification of elastomeric materials for industrial applications |
| 10/30212482 DC : 0 | BS ISO 4658 - ACRYLONITRILE-BUTADIENE RUBBER (NBR) - EVALUATION PROCEDURE |
| UNI 11007 : 2009 | REQUIREMENTS AND INDICATIONS FOR LABELLING OF FUR GOODS |
| PREN 681-1 : DRAFT 2016 | ELASTOMERIC SEALS - MATERIAL REQUIREMENTS FOR PIPE JOINT SEALS USED IN WATER AND DRAINAGE APPLICATIONS - PART 1: VULCANIZED RUBBER |
| BS ISO 248:2005 | Rubber, raw. Determination of volatile-matter content |
| BS ISO 248-1:2011 | Rubber, raw. Determination of volatile-matter content Hot-mill method and oven method |
| BS EN 3825:2014 | Aerospace series. Fluorosilicone rubber (FVMQ). Hardness 60 IRHD |
| BS ISO 18064 : 2003 AMD 15771 | THERMOPLASTIC ELASTOMERS - NOMENCLATURE AND ABBREVIATED TERMS |
| 11/30242401 DC : 0 | BS EN 2846 - FUEL AND SYNTHETIC OIL RESISTANT ACRYLONITRILE-BUTADIENE RUBBER (NBR) - HARDNESS GRADE 60 - CHARACTERISTICS |
| ISO 4658:1999 | Acrylonitrile-butadiene rubber (NBR) Evaluation procedure |
| 98/717199 DC : DRAFT NOV 1998 | PREN 13397: INDUSTRIAL VALVES - DIAPHRAGM VALVES MADE OF METALLIC MATERIALS |
| 11/30242400 DC : 0 | BS EN 2845 - FUEL AND SYNTHETIC OIL RESISTANT ACRYLONITRILE-BUTADIENE RUBBER (NBR) - HARDNESS GRADE 50 - CHARACTERISTICS |
| 10/30195783 DC : 0 | BS ISO 4650 - RUBBER - IDENTIFICATION - INFRARED SPECTROMETRIC METHOD |
| CEI EN 62474 : 2013 | MATERIAL DECLARATION FOR PRODUCTS OF AND FOR THE ELECTROTECHNICAL INDUSTRY |
| 04/30112021 DC : DRAFT APR 2004 | ISO 4650 - RUBBER - IDENTIFICATION - INFRA-RED SPECTROMETRIC METHOD |
| 14/30287198 DC : 0 | BS ISO 15171-2 - CONNECTIONS FOR FLUID POWER AND GENERAL USE - HYDRAULIC COUPLINGS FOR DIAGNOSTIC PURPOSES - PART 2: COUPLING FOR CONNECTION UNDER PRESSURE |
| I.S. EN 2837:2012 | AEROSPACE SERIES - CHLOROPRENE RUBBER (CR) - HEAT RESISTANCE - HARDNESS 60 IRHD |
| 16/30340981 DC : 0 | BS EN 2795 - AEROSPACE SERIES - FLUOROCARBON RUBBER (FKM) - LOW COMPRESSIONS SET - HARDNESS 50 IRHD |
| 14/30266729 DC : 0 | BS ISO 17324 - RUBBER HOSES FOR AUTOMOTIVE TURBOCHARGERS - SPECIFICATION |
| BS ISO 6149-4 : 2006 | CONNECTIONS FOR FLUID POWER AND GENERAL USE - PORTS AND STUD ENDS WITH ISO 261 METRIC THREADS AND O-RING SEALING - PART 4: DIMENSIONS, DESIGN, TEST METHODS AND REQUIREMENTS FOR EXTERNAL HEX AND INTERNAL HEX PORT PLUGS |
| BS 7164-23.1:1993 | Chemical tests for raw and vulcanized rubber. Methods for determination of total sulfur content Oxygen combustion flask method |
| ISO 15171-1:1999 | Connections for fluid power and general use Hydraulic couplings for diagnostic purposes Part 1: Coupling not for connection under pressure |
| 17/30365666 DC : 0 | BS EN 62474 - MATERIAL DECLARATION FOR PRODUCTS OF AND FOR THE ELECTROTECHNICAL INDUSTRY |
| 11/30242389 DC : 0 | BS EN 2837 - HEAT RESISTANT POLYCHLOROPRENE RUBBER (CR) - HARDNESS GRADE 60 - CHARACTERISTICS |
| 15/30314239 DC : 0 | BS ISO 247 - RUBBER - DETERMINATION OF ASH |
| 10/30212479 DC : 0 | BS ISO 2475 - CHLOROPRENE RUBBER (CR) - GENERAL-PURPOSE TYPES - EVALUATION PROCEDURE |
| 04/30109201 DC : DRAFT OCT 2004 | EN 14879-2 - ORGANIC COATING SYSTEMS AND LININGS FOR PROTECTION OF INDUSTRIAL APPARATUS AND PLANTS AGAINST CORROSION CAUSED BY AGGRESSIVE MEDIA - PART 2: COATINGS ON METALLIC COMPONENTS |
| BS EN 2846:2013 | Aerospace series. Acrylonitrile-butadiene rubber (NBR). Fuel and synthetic oil resistant. Hardness 60 IRHD |
| PREN 2566 : 200P1 | AEROSPACE SERIES - FLUOROCARBON RUBBER (FKM) - HARDNESS 70 IRHD |
| 05/19992193 DC : 0 | BS EN 3825 - AEROSPACE SERIES - FLOUROSILICONE RUBBER(FVMQ) - HARDNESS 60 IRHD |
| I.S. EN 2844:2013 | AEROSPACE SERIES - ACRYLONITRILE-BUTADIENE RUBBER (NBR) - MINERAL OIL RESISTANT - HARDNESS 90 IRHD |
| BS ISO 16589-1 : 2011 | ROTARY SHAFT LIP-TYPE SEALS INCORPORATING THERMOPLASTIC SEALING ELEMENTS - PART 1: NOMINAL DIMENSIONS AND TOLERANCES |
| DIN 16966-7:1995-04 | PIPE JOINTS AND THEIR ELEMENTS OF GLASS FIBRE REINFORCED POLYESTER RESINS - PART 7: BUSHINGS, FLANGES, FLANGED AND BUTT JOINTS - GENERAL QUALITY REQUIREMENTS AND TEST METHODS |
| ISO 4081:2016 | Rubber hoses and tubing for cooling systems for internal-combustion engines Specification |
| I.S. EN 3697:2013 | AEROSPACE SERIES - ACRYLONITRILE-BUTADIENE RUBBER (NBR) - LOW TEMPERATURE RESISTANT - HARDNESS 60 IRHD |
| I.S. EN 2847:2013 | AEROSPACE SERIES - ACRYLONITRILE-BUTADIENE RUBBER (NBR) - FUEL AND SYNTHETIC OIL RESISTANT - HARDNESS 70 IRHD |
| I.S. EN 2839:2013 | AEROSPACE SERIES - CHLOROPRENE RUBBER (CR) - HEAT RESISTANCE - HARDNESS 80 IRHD |
| ISO 248-2:2012 | Rubber, raw Determination of volatile-matter content Part 2: Thermogravimetric methods using an automatic analyser with an infrared drying unit |
| ISO 1407:2011 | Rubber — Determination of solvent extract |
| ISO 3601-1:2012 | Fluid power systems — O-rings — Part 1: Inside diameters, cross-sections, tolerances and designation codes |
| UNE-EN ISO 6149-4:2017 | Connections for fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 4: Dimensions, design, test methods and requirements for external hex and internal hex port plugs (ISO 6149-4:2017) |
| UNI ISO 247 : 2014 | RUBBER - DETERMINATION OF ASH |
| EN ISO 6149-4:2017 | CONNECTIONS FOR FLUID POWER AND GENERAL USE - PORTS AND STUD ENDS WITH ISO 261 METRIC THREADS AND O-RING SEALING - PART 4: DIMENSIONS, DESIGN, TEST METHODS AND REQUIREMENTS FOR EXTERNAL HEX AND INTERNAL HEX PORT PLUGS (ISO 6149-4:2017) |
| IEC PAS 61906:2005 | Procedure for the declaration of materials in products of the electrotechnical and electronic industry |
| DIN EN 14879-4 E : 2008 | ORGANIC COATING SYSTEMS AND LININGS FOR PROTECTION OF INDUSTRIAL APPARATUS AND PLANTS AGAINST CORROSION CAUSED BY AGGRESSIVE MEDIA - PART 4: LININGS ON METALLIC COMPONENTS |
| DIN EN 2259:1995-11 | AEROSPACE SERIES - SILICONE RUBBER (VMQ) - HARDNESS 50 IRHD |
| DIN EN 2429:1995-11 | AEROSPACE SERIES - ETHYLEN-PROPYLENE RUBBER (EPM/EPDM) - HARDNESS 60 IRHD |
| DIN EN 2260:1995-11 | AEROSPACE SERIES - SILICONE RUBBER (VMQ) - HARDNESS 60 IRHD |
| DIN EN 3050:1998-07 | AEROSPACE SERIES - O-RINGS, IN FLUOROCARBON RUBBER (FKM), LOW COMPRESSION SET - TECHNICAL SPECIFICATION |
| DIN EN 2431:1995-11 | AEROSPACE SERIES - ETHYLEN-PROPYLENE RUBBER (EPM/EPDM) - HARDNESS 80 IRHD |
| DIN EN 2261:1995-11 | AEROSPACE SERIES - SILICONE RUBBER (VMQ) - HARDNESS 70 IRHD |
| UNE-EN 593:2009 | Industrial valves - Metallic butterfly valves |
| I.S. EN ISO 18064:2014 | THERMOPLASTIC ELASTOMERS - NOMENCLATURE AND ABBREVIATED TERMS (ISO 18064:2014) |
| DIN EN 681-1:2006-11 | Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications - Part 1: Vulcanized rubber |
| EN 12115:2011 | Rubber and thermoplastics hoses and hose assemblies for liquid or gaseous chemicals - Specification |
| I.S. EN 12115:2011 | RUBBER AND THERMOPLASTICS HOSES AND HOSE ASSEMBLIES FOR LIQUID OR GASEOUS CHEMICALS - SPECIFICATION |
| DIN 28055-1:1990-09 | CHEMICAL APPARATUS - SURFACE PROTECTION WITH ORGANIC LININGS FOR APPLICATION TO METALLIC COMPONENTS - PART 1: REQUIREMENTS |
| I.S. EN 12351:2010 | INDUSTRIAL VALVES - PROTECTIVE CAPS FOR VALVES WITH FLANGED CONNECTIONS |
| I.S. EN 3049:1998 | AEROSPACE SERIES - O-RINGS, IN FLUOROCARBON RUBBER (FKM), LOW COMPRESSION SET - HARDNESS 80 IRHD |
| BS 4832:1987 | Specification for compatibility between elastomeric materials and hydraulic fluids |
| BS ISO 10889-1:2004 | Tool holders with cylindrical shank Cylindrical shank, location bore. Technical delivery conditions |
| 09/30154135 DC : 0 | BS EN 62474 - MATERIAL DECLARATION FOR ELECTRICAL AND ELECTRONIC EQUIPMENT |
| 09/30182064 DC : 0 | BS ISO 22762-2 - ELASTOMERIC SEISMIC-PROTECTION ISOLATORS - PART 2: APPLICATIONS FOR BRIDGES - SPECIFICATIONS |
| BS ISO 17257:2013 | Rubber. Identification of polymers. Pyrolytic gas-chromatographic method using mass-spectrometric detection |
| 08/30167237 DC : DRAFT FEB 2008 | BS ISO 1407 - RUBBER - DETERMINATION OF SOLVENT EXTRACT |
| I.S. EN 14483-2:2004 | VITREOUS AND PORCELAIN ENAMELS - DETERMINATION OF RESISTANCE TO CHEMICAL CORROSION - PART 2: DETERMINATION OF RESISTANCE TO CHEMICAL CORROSION BY BOILING ACIDS, NEUTRAL LIQUIDS AND/OR THEIR VAPOURS |
| BS EN 2840:2013 | Aerospace series. Acrylonitrile-butadiene rubber (NBR). Mineral oil resistant. Hardness 50 IRHD |
| BS EN 2838:2013 | Aerospace series. Chloroprene rubber (CR). Heat resistance. Hardness 70 IRHD |
| PD ISO/TR 24699:2009 | Rubber and rubber products. Environmental aspects. General guidelines for their inclusion in standards |
| NFT 46 053 : 2003 | RUBBER - IDENTIFICATION - PYROLYTIC GAS AND CHROMATOGRAPHIC METHOD - MASS SPECTROMETRY DETECTION |
| 03/308003 DC : DRAFT JUNE 2003 | ISO 22762-3 - ELASTOMERIC SEISMIC-PROTECTION ISOLATORS - PART 3: APPLICATIONS FOR BUILDINGS - SPECIFICATIONS |
| 11/30242402 DC : 0 | BS EN 2847 - FUEL AND SYNTHETIC OIL RESISTANT ACRYLONITRILE-BUTADIENE RUBBER (NBR) - HARDNESS GRADE 70 - CHARACTERISTICS |
| BS ISO 9974-4:2006 | Connections for general use and fluid power. Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing Dimensions, design, test methods and requirements for external hex and internal hex port plugs |
| 11/30242396 DC : 0 | BS EN 2844 - MINERAL OIL RESISTANT ACRYLONITRILE-BUTADIENE RUBBER (NBR) - HARDNESS GRADE 90 - CHARACTERISTICS |
| BS EN 16767:2016 | Industrial valves. Steel and cast iron check valves |
| 15/30317651 DC : 0 | BS ISO 11424 - RUBBER HOSES AND TUBING FOR AIR AND VACUUM SYSTEMS FOR INTERNAL-COMBUSTION ENGINES - SPECIFICATION |
| 10/30196881 DC : 0 | BS ISO 6072 - RUBBER - COMPATIBILITY BETWEEN HYDRAULIC FLUIDS AND STANDARD ELASTOMERIC MATERIALS |
| UNI EN 2849 : 2013 | AEROSPACE SERIES - ACRYLONITRILE-BUTADIENE RUBBER (NBR) - FUEL AND SYNTHETIC OIL RESISTANT - HARDNESS 90 IRHD |
| BS EN 3826:2014 | Aerospace series. Fluorosilicone rubber (FVMQ). Hardness 70 IRHD |
| 06/30156380 DC : DRAFT SEP 2006 | BS ISO 1795 - RUBBER, RAW NATURAL AND RAW SYNTHETIC - SAMPLING AND FURTHER PREPARATIVE PROCEDURES |
| 05/19991671 DC : 0 | BS EN 3826 - AEROSPACE SERIES - FLUOROSILICONE RUBBER (FVMQ) - HARDNESS 70 IRHD |
| 14/30293931 DC : 0 | BS ISO 19013-2 - RUBBER HOSES AND TUBING FOR FUEL CIRCUITS FOR INTERNAL COMBUSTION ENGINES - SPECIFICATION - PART 2: GASOLINE FUELS |
| 16/30341347 DC : 0 | BS EN 2798 - AEROSPACE SERIES - FLUOROCARBON RUBBER (FKM) - LOW COMPRESSIONS SET - HARDNESS 80 IRHD |
| 10/30196860 DC : 0 | BS ISO 1407 - RUBBER - DETERMINATION OF SOLVENT EXTRACT |
| 11/30242405 DC : 0 | BS EN 2848 - FUEL AND SYNTHETIC OIL RESISTANT ACRYLONITRILE-BUTADIENE RUBBER (NBR) - HARDNESS GRADE 80 - CHARACTERISTICS |
| 13/30255920 DC : 0 | BS ISO 17257 - RUBBER - IDENTIFICATION OF POLYMERS - PYROLYTIC GAS-CHROMATOGRAPHIC METHOD USING MASS-SPECTROMETRIC DETECTION |
| UNI EN 2843 : 2013 | AEROSPACE SERIES - ACRYLONITRILE-BUTADIENE RUBBER (NBR) - MINERAL OIL RESISTANT - HARDNESS 80 IRHD |
| ISO 22762-2:2010 | Elastomeric seismic-protection isolators Part 2: Applications for bridges Specifications |
| BS EN 2835:2012 | Aerospace series. Chloroprene rubber (CR). Heat resistance. Hardness 40 IRHD |
| 15/30320877 DC : 0 | BS EN 2796 - AEROSPACE SERIES - FLUOROCARBON RUBBER (FKM) - LOW COMPRESSIONS SET - HARDNESS 60 IRHD |
| 09/30193685 DC : 0 | BS ISO 4081 - RUBBER HOSES AND TUBING FOR COOLING SYSTEMS FOR INTERNAL-COMBUSTION ENGINES - SPECIFICATION |
| BS ISO 6072:2011 | Rubber. Compatibility between hydraulic fluids and standard elastomeric materials |
| BS EN 2841:2013 | Aerospace series. Acrylonitrile-butadiene rubber (NBR). Mineral oil resistant. Hardness 60 IRHD |
| UNI ISO 1407 : 2012 | RUBBER - DETERMINATION OF SOLVENT EXTRACT |
| DIN 28055-1:2002-04 | CHEMICAL APPARATUS - SURFACE PROTECTION WITH ORGANIC LININGS FOR APPLICATION TO METALLIC COMPONENTS - PART 1: REQUIREMENTS |
| PREN 2797 : 200P1 | AEROSPACE SERIES - FLUOROCARBON RUBBER (FKM) - LOW COMPRESSIONS SET - HARDNESS 70 IRHD |
| SAE J 2979 : 2012 | TEST METHOD FOR VULCANIZED RUBBER AND THERMOPLASTIC ELASTOMER DETERMINATION OF COMPRESSIVE STRESS RELAXATION (CSR) RESPONSE |
| UNI EN 2835 : 2013 | AEROSPACE SERIES - CHLOROPRENE RUBBER (CR) - HEAT RESISTANCE - HARDNESS 40 IRHD |
| ISO 6149-4:2017 | Connections for fluid power and general use — Ports and stud ends with ISO 261 metric threads and O-ring sealing — Part 4: Dimensions, design, test methods and requirements for external hex and internal hex port plugs |
| SAE J 2332 : 2013 | MARKING OF RUBBER PARTS |
| NF ISO 6072 : 2012 | RUBBER - COMPATIBILITY BETWEEN HYDRAULIC FLUIDS AND STANDARD ELASTOMERIC MATERIALS |
| ISO 248-1:2011 | Rubber, raw Determination of volatile-matter content Part 1: Hot-mill method and oven method |
| BS ISO 11424:2017 | Rubber hoses and tubing for air and vacuum systems for internal-combustion engines. Specification |
| I.S. EN 2842:2013 | AEROSPACE SERIES - ACRYLONITRILE-BUTADIENE RUBBER (NBR) - MINERAL OIL RESISTANT - HARDNESS 70 IRHD |
| I.S. EN 16767:2016 | INDUSTRIAL VALVES - STEEL AND CAST IRON CHECK VALVES |
| UNI EN 2848 : 2013 | AEROSPACE SERIES - ACRYLONITRILE-BUTADIENE RUBBER (NBR) - FUEL AND SYNTHETIC OIL RESISTANT - HARDNESS 80 IRHD |
| ISO 248:2005 | Rubber, raw Determination of volatile-matter content |
| BS ISO 22762-3:2005 | Elastomeric seismic-protection isolators Applications for buildings. Specifications |
| BS EN 2795:2018 | Aerospace series. Fluorocarbon rubber (FKM). Low compressions set. Hardness 50 IRHD |
| ISO/TR 24699:2009 | Rubber and rubber products Environmental aspects General guidelines for their inclusion in standards |
| UNI EN 2841 : 2013 | AEROSPACE SERIES - ACRYLONITRILE-BUTADIENE RUBBER (NBR) - MINERAL OIL RESISTANT - HARDNESS 60 IRHD |
| ISO 18797-1:2016 | Petroleum, petrochemical and natural gas industries — External corrosion protection of risers by coatings and linings — Part 1: Elastomeric coating systems-polychloroprene or EPDM |
| BIS IS/ISO 6194-1 : 2007 | ROTARY SHAFT LIP-TYPE SEALS INCORPORATING ELASTOMERIC SEALING ELEMENTS - PART 1: NOMINAL DIMENSIONS AND TOLERANCES |
| ISO 9631:2018 | Rubber seals — Joint rings for pipelines for hot-water supply up to 110 °C — Specification for the material |
| DIN EN 14879-2 E : 2007 | ORGANIC COATING SYSTEMS AND LININGS FOR PROTECTION OF INDUSTRIAL APPARATUS AND PLANTS AGAINST CORROSION CAUSED BY AGGRESSIVE MEDIA - PART 2: COATINGS ON METALLIC COMPONENTS |
| DIN EN 2432:1995-11 | AEROSPACE SERIES - ETHYLEN-PROPYLENE RUBBER (EPM/EPDM) - HARDNESS 90 IRHD |
| DIN EN 2428:1995-11 | AEROSPACE SERIES - ETHYLEN-PROPYLENE RUBBER (EPM/EPDM) - HARDNESS 50 IRHD |
| EN 61518:2001/corrigendum:2002 | MATING DIMENSIONS BETWEEN DIFFERENTIAL PRESSURE (TYPE) MEASURING INSTRUMENTS AND FLANGED-ON SHUT-OFF DEVICES UP TO 413 BAR (41,3 MPA) |
| DIN EN 12351:2010-08 | Industrial valves - Protective caps for valves with flanged connections |
| DIN EN 2430:1995-11 | AEROSPACE SERIES - ETHYLEN-PROPYLENE RUBBER (EPM/EPDM) - HARDNESS 70 IRHD |
| DIN EN 681-1:2016-07 (Draft) | Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications - Part 1: Vulcanized rubber; German and English version prEN 681-1:2016 |
| DIN EN 12115:2011-04 | Rubber and thermoplastics hoses and hose assemblies for liquid or gaseous chemicals - Specification; German version EN 12115:2011 |
| EN 3049:1998 | Aerospace series - O-rings, in fluorocarbon rubber (FKM), low compression set - Hardness 80 IRHD |
| EN 2846 : 2013 | AEROSPACE SERIES - ACRYLONITRILE-BUTADIENE RUBBER (NBR) - FUEL AND SYNTHETIC OIL RESISTANT - HARDNESS 60 IRHD |
| UNI EN 12351 : 2010 | INDUSTRIAL VALVES - PROTECTIVE CAPS FOR VALVES WITH FLANGED CONNECTIONS |
| UNI EN ISO 18064 : 2015 | THERMOPLASTIC ELASTOMERS - NOMENCLATURE AND ABBREVIATED TERMS |
| BS 3502-1:1991 | Symbols for plastics and rubber materials Schedule for symbols for plastics |
| ONORM EN ISO 18064 : 2015 | THERMOPLASTIC ELASTOMERS - NOMENCLATURE AND ABBREVIATED TERMS (ISO 18064:2014) |
| UNE-ISO 248-1:2013 | Rubber, raw — Determination of volatile-matter content — Part 1: Hot-mill method and oven method |
| UNI ISO 2230 : 2009 | RUBBER PRODUCTS - GUIDELINES FOR STORAGE |
| I.S. EN 3826:2014 | AEROSPACE SERIES - FLUOROSILICONE RUBBER (FVMQ) - HARDNESS 70 IRHD |
| BS EN 16821:2017 | Rubber and plastics hoses and hose assemblies for use in the pharmaceutical and biotechnological industry. Silicone rubber hoses |
| I.S. EN 2795:2018 | AEROSPACE SERIES - FLUOROCARBON RUBBER (FKM) - LOW COMPRESSIONS SET - HARDNESS 50 IRHD |
| 11/30242411 DC : 0 | BS EN 3697 - AEROSPACE SERIES - ACRYLONITRILE-BUTADIENE RUBBER (NBR) - LOW TEMPERATURE RESISTANT - HARDNESS 60 IRHD |
| ANSI/ISA-75.10.01 : 2013 | GENERAL REQUIREMENTS FOR CLAMP OR PINCH VALVES |
| 16/30340982 DC : 0 | BS EN 2796 - AEROSPACE SERIES - FLUOROCARBON RUBBER (FKM) - LOW COMPRESSIONS SET - HARDNESS 60 IRHD |
| 15/30320878 DC : 0 | BS EN 2797 - AEROSPACE SERIES - FLUOROCARBON RUBBER (FKM) - LOW COMPRESSIONS SET - HARDNESS 70 IRHD |
| BS EN 3698:2013 | Aerospace series. Acrylonitrile-butadiene rubber (NBR). Low temperature resistant. Hardness 70 IRHD |
| DIN EN ISO 28706-2:2016-04 (Draft) | VITREOUS AND PORCELAIN ENAMELS - DETERMINATION OF RESISTANCE TO CHEMICAL CORROSION - PART 2: DETERMINATION OF RESISTANCE TO CHEMICAL CORROSION BY BOILING ACIDS, BOILING NEUTRAL LIQUIDS, ALKALINE LIQUIDS AND/OR THEIR VAPOURS (ISO 28706-2:2017) |
| 15/30320879 DC : 0 | BS EN 2798 - AEROSPACE SERIES - FLUOROCARBON RUBBER (FKM) - LOW COMPRESSIONS SET - HARDNESS 80 IRHD |
| ISO 27996:2009 | Aerospace fluid systems — Elastomer seals — Storage and shelf life |
| 11/30242395 DC : 0 | BS EN 2843 - MINERAL OIL RESISTANT ACRYLONITRILE-BUTADIENE RUBBER (NBR) - HARDNESS GRADE 80 - CHARACTERISTICS |
| 99/701512 DC : DRAFT JAN 1999 | PREN 7000-2 - AEROSPACE SERIES - NON-METALLIC MATERIALS - RULES FOR THE DRAFTING AND PRESENTATION OF MATERIALS STANDARDS - PART 2: RUBBERS |
| BS ISO 15171-1:1999 | Connections for fluid power and general use. Hydraulic couplings for diagnostic purposes Coupling not for connection under pressure |
| ISO 9924-3:2009 | Rubber and rubber products — Determination of the composition of vulcanizates and uncured compounds by thermogravimetry — Part 3: Hydrocarbon rubbers, halogenated rubbers and polysiloxane rubbers after extraction |
| DIN EN 3826:2015-12 | AEROSPACE SERIES - FLUOROSILICONE RUBBER (FVMQ) - HARDNESS 70 IRHD |
| 16/30339483 DC : 0 | BS EN 593 - INDUSTRIAL VALVES - METALLIC BUTTERFLY VALVES FOR GENERAL PURPOSES |
| DD IEC PAS 61906 : DRAFT DEC 2005 | PROCEDURE FOR THE DECLARATION OF MATERIALS IN PRODUCTS OF THE ELECTROTECHNICAL AND ELECTRONIC INDUSTRY |
| BS ISO 1407:2011 | Rubber. Determination of solvent extract |
| 16/30293875 DC : 0 | BS EN ISO 28706-2 - DETERMINATION OF RESISTANCE TO CHEMICAL CORROSION - PART 2: DETERMINATION OF RESISTANCE TO CHEMICAL CORROSION BY BOILING ACIDS, BOILING NEUTRAL LIQUIDS, ALKALINE LIQUIDS AND/OR THEIR VAPOURS |
| UNI EN 2840 : 2013 | AEROSPACE SERIES - ACRYLONITRILE-BUTADIENE RUBBER (NBR) - MINERAL OIL RESISTANT - HARDNESS 50 IRHD |
| UNE-ISO 248-2:2013 | Rubber, raw — Determination of volatilematter content — Part 2: Thermogravimetric methods using an automatic analyser with an infrared drying unit |
| 15/30315109 DC : 0 | BS EN 16821 - HOSE ASSEMBLIES FOR USE IN THE PHARMACEUTICAL AND BIOTECHNOLOGICAL INDUSTRY WITH HOSES OF NON-METALLIC MATERIALS - SILICONE RUBBER HOSES |
| UNI EN 2845 : 2013 | AEROSPACE SERIES - ACRYLONITRILE-BUTADIENE RUBBER (NBR) - FUEL AND SYNTHETIC OIL RESISTANT - HARDNESS 50 IRHD |
| DIN ISO 10889-1:2006-01 | Tool holders with cylindrical shank - Part 1: Cylindrical shank, location bore; Technical delivery conditions (ISO 10889-1:2004) |
| BS ISO 4081:2016 | Rubber hoses and tubing for cooling systems for internal-combustion engines. Specification |
| 92/70523 DC : DRAFT JAN 1992 | PREN 3705 - AEROSPACE SERIES - ETHYLENE-PROPYLENE RUBBER (EPM/EPDM) HARDNESS 80 IRHD FOR HYDRAULIC CIRCUITS |
| I.S. EN 593:2017 | INDUSTRIAL VALVES - METALLIC BUTTERFLY VALVES FOR GENERAL PURPOSES |
| PREN 593 : DRAFT 2016 | INDUSTRIAL VALVES - METALLIC BUTTERFLY VALVES FOR GENERAL PURPOSES |
| BS EN 2849:2013 | Aerospace series. Acrylonitrile-butadiene rubber (NBR). Fuel and synthetic oil resistant. Hardness 90 IRHD |
| 15/30320883 DC : 0 | BS EN 2799 - AEROSPACE SERIES - FLUOROCARBON RUBBER (FKM) - LOW COMPRESSIONS SET - HARDNESS 90 IRHD |
| 04/102149 DC : DRAFT JAN 2004 | ISO 10889-1 - TOOL HOLDERS WITH CYLINDRICAL SHANK - PART 1: CYLINDRICAL SHANK, LOCATION BORE - TECHNICAL DELIVERY CONDITIONS |
| DIN 20043:2003-09 | STAPLE-LOCK COUPLINGS FOR HYDRAULIC POWER-TRANSMISSION CIRCUITS |
| BS ISO 19013-2:2005 | Rubber hoses and tubing for fuel circuits for internal combustion engines. Specification Gasoline fuels |
| 07/30164065 DC : 0 | BS ISO 24699 - RUBBER AND RUBBER PRODUCTS - ENVIRONMENTAL ASPECTS - GENERAL GUIDELINES FOR THEIR INCLUSION IN STANDARDS |
| 11/30242385 DC : 0 | BS EN 2835 - HEAT RESISTANT POLYCHLOROPRENE RUBBER (CR) - HARDNESS GRADE 40 - CHARACTERISTICS |
| 15/30320875 DC : 0 | BS EN 2567 - AEROSPACE SERIES - FLUOROCARBON RUBBER (FPM) - HARDNESS 80 IRHD |
| 00/704355 DC : 0 | PREN 4440 - AEROSPACE SERIES - RUBBER PANELS AND CALENDERED SHEETS - DIMENSIONS |
| PREN 2799 : 200P1 | AEROSPACE SERIES - FLUOROCARBON RUBBER (FKM) LOW COMPRESSIONS SET - HARDNESS 90 IRHD |
| 07/30169154 DC : 0 | BS ISO 28706-2 - VITREOUS AND PORCELAIN ENAMELS - DETERMINATION OF RESISTANCE TO CHEMICAL CORROSION - PART 2: DETERMINATION OF RESISTANCE TO CHEMICAL CORROSION BY BOILING ACIDS, NEUTRAL LIQUIDS AND/OR THEIR VAPOURS |
| UNI ISO 9924-3 : 2010 | RUBBER AND RUBBER PRODUCTS - DETERMINATION OF THE COMPOSITION OF VULCANIZATES AND UNCURED COMPOUNDS BY THERMOGRAVIMETRY - PART 3: HYDROCARBON RUBBERS, HALOGENATED RUBBERS AND POLYSILOXANE RUBBERS AFTER EXTRACTION |
| DIN ISO 3601-1:2013-11 | Fluid power systems - O-rings - Part 1: Inside diameters, cross-sections, tolerances and designation codes (ISO 3601-1:2012 + Cor. 1:2012) |
| UNI EN 2836 : 2013 | AEROSPACE SERIES - CHLOROPRENE RUBBER (CR) - HEAT RESISTANCE - HARDNESS 50 IRHD |
| I.S. EN 2840:2013 | AEROSPACE SERIES - ACRYLONITRILE-BUTADIENE RUBBER (NBR) - MINERAL OIL RESISTANT - HARDNESS 50 IRHD |
| DIN 3760 E : 1996 | ROTARY SHAFT LIP SEALS |
| 16/30341348 DC : 0 | BS EN 2799 - AEROSPACE SERIES - FLUOROCARBON RUBBER (FKM) - LOW COMPRESSIONS SET - HARDNESS 90 IRHD |
| PREN 3827 : DRAFT 2006 | AEROSPACE SERIES - FLUOROSILICONE RUBBER (FVMQ) - HARDNESS 80 IRHD |
| PREN 2844 : 200P1 | AEROSPACE SERIES - ACRYLONITRILE-BUTADIENE RUBBER (NBR) - MINERAL OIL RESISTANT - HARDNESS 90 IRHD |
| UNI EN 2837 : 2013 | AEROSPACE SERIES - CHLOROPRENE RUBBER (CR) - HEAT RESISTANCE - HARDNESS 60 IRHD |
| BS ISO 19013-1:2005 | Rubber hoses and tubing for fuel circuits for internal combustionengines . Specification Diesel fuels |
| 16/30318653 DC : 0 | BS EN 681-1 - ELASTOMERIC SEALS - MATERIAL REQUIREMENTS FOR PIPE JOINT SEALS USED IN WATER AND DRAINAGE APPLICATIONS - PART 1: VULCANIZED RUBBER |
| CSA C22.2 No. 0.17 : 2000 : R2013 | EVALUATION OF PROPERTIES OF POLYMERIC MATERIALS |
| ISO 4633:2015 | Rubber seals — Joint rings for water supply, drainage and sewerage pipelines — Specification for materials |
| EN ISO 1043-1:2011/A1:2016 | PLASTICS - SYMBOLS AND ABBREVIATED TERMS - PART 1: BASIC POLYMER AND THEIR SPECIAL CHARACTERISTICS (ISO 1043-1:2011/AMD 1:2016) |
| I.S. EN ISO 6149-4:2017 | CONNECTIONS FOR FLUID POWER AND GENERAL USE - PORTS AND STUD ENDS WITH ISO 261 METRIC THREADS AND O-RING SEALING - PART 4: DIMENSIONS, DESIGN, TEST METHODS AND REQUIREMENTS FOR EXTERNAL HEX AND INTERNAL HEX PORT PLUGS (ISO 6149-4:2017) |
| I.S. EN 62474:2012 | MATERIAL DECLARATION FOR PRODUCTS OF AND FOR THE ELECTROTECHNICAL INDUSTRY (IEC 62474:2012 (EQV)) |
| ISO 3601-5:2015 | Fluid power systems O-rings Part 5: Specification of elastomeric materials for industrial applications |
| EN 2795:2018 | Aerospace series - Fluorocarbon rubber (FKM) - Low compressions set - Hardness 50 IRHD |
| ISO 19013-2:2016 | Rubber hoses and tubing for fuel circuits for internal combustion engines Specification Part 2: Gasoline fuels |
| ISO 11424:2017 | Rubber hoses and tubing for air and vacuum systems for internal-combustion engines — Specification |
| ISO 17324:2014 | Rubber hoses for automotive turbochargers — Specification |
| ISO 17257:2013 | Rubber Identification of polymers Pyrolytic gas-chromatographic method using mass-spectrometric detection |
| I.S. EN ISO 28706-2:2017 | VITREOUS AND PORCELAIN ENAMELS - DETERMINATION OF RESISTANCE TO CHEMICAL CORROSION - PART 2: DETERMINATION OF RESISTANCE TO CHEMICAL CORROSION BY BOILING ACIDS, BOILING NEUTRAL LIQUIDS, ALKALINE LIQUIDS AND/OR THEIR VAPOURS (ISO 28706-2:2017) |
| UNE-EN ISO 1043-1:2012 | Plastics - Symbols and abbreviated terms - Part 1: Basic polymers and their special characteristics (ISO 1043-1:2011) |
| DIN EN ISO 1043-1:2016-09 | PLASTICS - SYMBOLS AND ABBREVIATED TERMS - PART 1: BASIC POLYMERS AND THEIR SPECIAL CHARACTERISTICS (ISO 1043-1:2011 + AMD.1:2016) |
| BS EN 3049:1998 | O-rings, in fluorocarbon rubber (FKM), low compression set. Hardness 80 IRHD |
| BS EN 3050:1998 | O-rings, in fluorocarbon rubber (FKM), low compression set. Technical specification |
| ISO 28706-2:2017 | Vitreous and porcelain enamels — Determination of resistance to chemical corrosion — Part 2: Determination of resistance to chemical corrosion by boiling acids, boiling neutral liquids, alkaline liquids and/or their vapours |
| EN 16767:2016 | Industrial valves - Steel and cast iron check valves |
| ISO 18064:2014 | Thermoplastic elastomers Nomenclature and abbreviated terms |
| BS EN 12115:2011 | Rubber and thermoplastics hoses and hose assemblies for liquid or gaseous chemicals. Specification |
| BS EN 14879-4:2007 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media Linings on metallic components |
| BS EN 13397:2002 | Industrial valves. Diaphragm valves made of metallic materials |
| IEC 62474:2012 | Material declaration for products of and for the electrotechnical industry |
| IEC 61518:2001 | Mating dimensions between differential pressure (type) measuring instruments and flanged-on shut-off devices up to 413 BAR (41,3 MPa) |
| UNE-EN ISO 18064:2015 | Thermoplastic elastomers - Nomenclature and abbreviated terms (ISO 18064:2014) |
| EN 681-1:1996/A3:2005 | ELASTOMERIC SEALS - MATERIALS REQUIREMENTS FOR PIPE JOINT SEALS USED IN WATER AND DRAINAGE APPLICATIONS - PART 1: VULCANIZED RUBBER |
| EN 3698:2013 | Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Low temperature resistant - Hardness 70 IRHD |
| EN 2261 : 1995 | AEROSPACE SERIES - SILICONE RUBBER (VMQ) - HARDNESS 70 IRHD |
| EN 14879-2:2006 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 2: Coatings on metallic components |
| EN 2260 : 1995 | AEROSPACE SERIES - SILICONE RUBBER (VMQ) - HARDNESS 60 IRHD |
| EN 2429 : 1995 | AEROSPACE SERIES - ETHYLENE-PROPYLENE RUBBER (EPM/EPDM) - HARDNESS 60 IRHD |
| EN 2845 : 2013 | AEROSPACE SERIES - ACRYLONITRILE-BUTADIENE RUBBER (NBR) - FUEL AND SYNTHETIC OIL RESISTANT - HARDNESS 50 IRHD |
| EN 2428 : 1995 | AEROSPACE SERIES - ETHYLENE-PROPYLENE RUBBER (EPM/EPDM) - HARDNESS 50 IRHD |
| EN 2259 : 1995 | AEROSPACE SERIES - SILICONE RUBBER (VMQ) - HARDNESS 50 IRHD |
| EN 2432 : 1995 | AEROSPACE SERIES - ETHYLENE-PROPYLENE RUBBER (EPM/EPDM) - HARDNESS 90 IRHD |
| EN 3825:2014 | Aerospace series - Fluorosilicone rubber (FVMQ) - Hardness 60 IRHD |
| EN 2262 : 1995 | Aerospace series - Silicone rubber (VMQ/PVMQ) with high tear strength - Hardness 50 IRHD |
| EN 2841 : 2013 | AEROSPACE SERIES - ACRYLONITRILE-BUTADIENE RUBBER (NBR) - MINERAL OIL RESISTANT - HARDNESS 60 IRHD |
| EN 2839 : 2013 | AEROSPACE SERIES - CHLOROPRENE RUBBER (CR) - HEAT RESISTANCE - HARDNESS 80 IRHD |
| EN 2844 : 2013 | AEROSPACE SERIES - ACRYLONITRILE-BUTADIENE RUBBER (NBR) - MINERAL OIL RESISTANT - HARDNESS 90 IRHD |
| EN 2431 : 1995 | Aerospace series - Ethylene-propylene rubber (EPM/EPDM) - Hardness 80 IRHD |
| EN 3826:2014 | Aerospace series - Fluorosilicone rubber (FVMQ) - Hardness 70 IRHD |
| EN 2104 : 1996 | Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Hardness 40 IRHD |
| EN 2838 : 2013 | AEROSPACE SERIES - CHLOROPRENE RUBBER (CR) - HEAT RESISTANCE - HARDNESS 70 IRHD |
| EN ISO 18064:2014 | Thermoplastic elastomers - Nomenclature and abbreviated terms (ISO 18064:2014) |
| EN 2843 : 2013 | AEROSPACE SERIES - ACRYLONITRILE-BUTADIENE RUBBER (NBR) - MINERAL OIL RESISTANT - HARDNESS 80 IRHD |
| EN 2837 : 2012 | AEROSPACE SERIES - CHLOROPRENE RUBBER (CR) - HEAT RESISTANCE - HARDNESS 60 IRHD |
| EN 2430 : 1995 | AEROSPACE SERIES - ETHYLENE-PROPYLENE RUBBER (EPM/EPDM) -HARDNESS 70 IRHD |
| EN ISO 21049:2004 | Pumps - Shaft sealing systems for centrifugal and rotary pumps (ISO 21049:2004) |
| EN 2847 : 2013 | AEROSPACE SERIES - ACRYLONITRILE-BUTADIENE RUBBER (NBR) - FUEL AND SYNTHETIC OIL RESISTANT - HARDNESS 70 IRHD |
| EN 2836 : 2012 | AEROSPACE SERIES - CHLOROPRENE RUBBER (CR) - HEAT RESISTANCE - HARDNESS 50 IRHD |
| EN 3827:2014 | Aerospace series - Fluorosilicone rubber (FVMQ) - Hardness 80 IRHD |
| EN 2849 : 2013 | AEROSPACE SERIES - ACRYLONITRILE-BUTADIENE RUBBER (NBR) - FUEL AND SYNTHETIC OIL RESISTANT - HARDNESS 90 IRHD |
| EN 2848 : 2013 | AEROSPACE SERIES - ACRYLONITRILE-BUTADIENE RUBBER (NBR) - FUEL AND SYNTHETIC OIL RESISTANT - HARDNESS 80 IRHD |
| EN 16821:2017 | Rubber and plastics hoses and hose assemblies for use in the pharmaceutical and biotechnological industry - Silicone rubber hoses |
| EN 3697:2013 | Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Low temperature resistant - Hardness 60 IRHD |
| EN 2835 : 2012 | AEROSPACE SERIES - CHLOROPRENE RUBBER (CR) - HEAT RESISTANCE - HARDNESS 40 IRHD |
| EN 14483-2 : 2004 | VITREOUS AND PORCELAIN ENAMELS - DETERMINATION OF RESISTANCE TO CHEMICAL CORROSION - PART 2: DETERMINATION OF RESISTANCE TO CHEMICAL CORROSION BY BOILING ACIDS, NEUTRAL LIQUIDS AND/OR THEIR VAPOURS |
| EN ISO 28706-2:2017 | Vitreous and porcelain enamels - Determination of resistance to chemical corrosion - Part 2: Determination of resistance to chemical corrosion by boiling acids, boiling neutral liquids, alkaline liquids and/or their vapours (ISO 28706-2:2017) |
| EN 593:2017 | Industrial valves - Metallic butterfly valves for general purposes |
| EN 2840:2013 | Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Mineral oil resistant - Hardness 50 IRHD |
| EN 2842 : 2013 | AEROSPACE SERIES - ACRYLONITRILE-BUTADIENE RUBBER (NBR) - MINERAL OIL RESISTANT - HARDNESS 70 IRHD |
| EN 3050:1998 | Aerospace series - O-rings, in fluorocarbon rubber (FKM), low compression set - Technical specification |
| EN 14879-4:2007 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 4: Linings on metallic components |
| BS ISO 7745:2010 | Hydraulic fluid power. Fire-resistant FR) fluids. Requirements and guidelines for use |
| SAE J 1344 : 1997(S2017) | MARKING OF PLASTIC PARTS |
| BS ISO 4658:1999 | Acrylonitrile-butadiene rubber (NBR). Evaluation procedure |
| DIN ISO 7388-3 E : 2015 | TOOL SHANKS WITH 7/24 TAPER FOR AUTOMATIC TOOL CHANGERS - PART 3: RETENTION KNOBS FOR SHANKS OF FORMS AC, AD, AF, UC, UD, UF, JD AND JF (ISO 7388-3:2013) |
| 03/308002 DC : DRAFT JUNE 2003 | ISO 22762-2 - ELASTOMERIC SEISMIC-PROTECTION ISOLATORS - PART 2: APPLICATIONS FOR BRIDGES - SPECIFICATIONS |
| I.S. EN 3698:2013 | AEROSPACE SERIES - ACRYLONITRILE-BUTADIENE RUBBER (NBR) - LOW TEMPERATURE RESISTANT - HARDNESS 70 IRHD |
| BS EN 3697:2013 | Aerospace series. Acrylonitrile-butadiene rubber (NBR). Low temperature resistant. Hardness 60 IRHD |
| 16/30340980 DC : 0 | BS EN 2568 - AEROSPACE SERIES - FLUOROCARBON RUBBER (FPM) - HARDNESS 90 IRHD |
| I.S. EN 2841:2013 | AEROSPACE SERIES - ACRYLONITRILE-BUTADIENE RUBBER (NBR) - MINERAL OIL RESISTANT - HARDNESS 60 IRHD |
| 17/30334047 DC : 0 | BS ISO 22762-2 - ELASTOMERIC SEISMIC-PROTECTION ISOLATORS - PART 2: APPLICATIONS FOR BRIDGES - SPECIFICATIONS |
| 11/30242390 DC : 0 | BS EN 2838 - HEAT RESISTANT POLYCHLOROPRENE RUBBER (CR) - HARDNESS GRADE 70 - CHARACTERISTICS |
| BS ISO 18797-1 : 2016 COR 2017 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - EXTERNAL CORROSION PROTECTION OF RISERS BY COATINGS AND LININGS - PART 1: ELASTOMERIC COATING SYSTEMSPOLYCHLOROPRENE OR EPDM |
| UNI ISO 2475 : 2012 | CHLOROPRENE RUBBER (CR) - GENERAL-PURPOSE TYPES - EVALUATION PROCEDURE |
| UNI EN 2846 : 2013 | AEROSPACE SERIES - ACRYLONITRILE-BUTADIENE RUBBER (NBR) - FUEL AND SYNTHETIC OIL RESISTANT - HARDNESS 60 IRHD |
| 11/30242394 DC : 0 | BS EN 2842 - MINERAL OIL RESISTANT ACRYLONITRILE-BUTADIENE RUBBER (NBR) - HARDNESS GRADE 70 - CHARACTERISTICS |
| I.S. EN 2835:2012 | AEROSPACE SERIES - CHLOROPRENE RUBBER (CR) - HEAT RESISTANCE - HARDNESS 40 IRHD |
| ONORM EN 12115 : OCT 2011 | RUBBER AND THERMOPLASTICS HOSES AND HOSE ASSEMBLIES FOR LIQUID OR GASEOUS CHEMICALS - SPECIFICATION |
| ISO 1434:2016 | Natural rubber in bales Amount of bale coating Determination |
| BS ISO 15171-2:2016 | Connections for fluid power and general use. Hydraulic couplings for diagnostic purposes Coupling with M16 x 2 end for connection under pressure |
| I.S. EN 3825:2014 | AEROSPACE SERIES - FLUOROSILICONE RUBBER (FVMQ) - HARDNESS 60 IRHD |
| ISO 7270-1:2003 | Rubber Analysis by pyrolytic gas-chromatographic methods Part 1: Identification of polymers (single polymers and polymer blends) |
| BS EN 593:2017 | Industrial valves. Metallic butterfly valves for general purposes |
| BS EN ISO 28706-2:2017 | Vitreous and porcelain enamels. Determination of resistance to chemical corrosion Determination of resistance to chemical corrosion by boiling acids, boiling neutral liquids, alkaline liquids and/or their vapours |
| BS EN 2844:2013 | Aerospace series. Acrylonitrile-butadiene rubber (NBR). Mineral oil resistant. Hardness 90 IRHD |
| BS ISO 247:2006 | Rubber. Determination of ash |
| BS ISO 27996:2009 | Aerospace fluid systems. Elastomer seals. Storage and shelf life |
| 07/30155311 DC : 0 | BS ISO 27996 - AEROSPACE FLUID SYSTEMS - ELASTOMER SEALS - STORAGE AND SHELF LIFE |
| 16/30340977 DC : 0 | BS EN 2566 - AEROSPACE SERIES - FLUOROCARBON RUBBER (FPM) - HARDNESS 70 IRHD |
| I.S. EN 3827:2014 | AEROSPACE SERIES - FLUOROSILICONE RUBBER (FVMQ) - HARDNESS 80 IRHD |
| 11/30242412 DC : 0 | BS EN 3698 - AEROSPACE SERIES - ACRYLONITRILE-BUTADIENE RUBBER (NBR) - LOW TEMPERATURE RESISTANT - HARDNESS 70 IRHD |
| UNI EN 2844 : 2013 | AEROSPACE SERIES - ACRYLONITRILE-BUTADIENE RUBBER (NBR) - MINERAL OIL RESISTANT - HARDNESS 90 IRHD |
| ISO 7388-3:2016 | Tool shanks with 7/24 taper for automatic tool changers Part 3: Retention knobs of forms AD, AF, UD, UF, JD and JF |
| DIN EN 16767:2016-08 | INDUSTRIAL VALVES - STEEL AND CAST IRON CHECK VALVES |
| 00/105249 DC : DRAFT JULY 2000 | PREN 13956 - FLEXIBLE SHEETS FOR WATERPROOFING - PLASTIC AND RUBBER SHEETS FOR ROOF WATERPROOFING - DEFINITIONS AND CHARACTERISTICS |
| UNI EN 2842 : 2013 | AEROSPACE SERIES - ACRYLONITRILE-BUTADIENE RUBBER (NBR) - MINERAL OIL RESISTANT - HARDNESS 70 IRHD |
| 15/30320876 DC : 0 | BS EN 2568 - AEROSPACE SERIES - FLUOROCARBON RUBBER (FPM) - HARDNESS 90 IRHD |
| DIN EN 16821 E : 2017 | RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES FOR USE IN THE PHARMACEUTICAL AND BIOTECHNOLOGICAL INDUSTRY - SILICONE RUBBER HOSES |
| I.S. EN 2836:2012 | AEROSPACE SERIES - CHLOROPRENE RUBBER (CR) - HEAT RESISTANCE - HARDNESS 50 IRHD |
| BS 7164-3:1992 | Chemical tests for raw and vulcanized rubber Methods for determination of solvent extract |
| 11/30242393 DC : 0 | BS EN 2841 - MINERAL OIL RESISTANT ACRYLONITRILE-BUTADIENE RUBBER (NBR) - HARDNESS GRADE 60 - CHARACTERISTICS |
| BS ISO 6194-1:2007 | Rotary shaft lip-type seals incorporating elastomeric sealing elements Nominal dimensions and tolerances |
| 02/122011 DC : DRAFT MAY 2002 | ISO/DIS 17563 - RUBBER COMPOUNDING MATERIALS - STANDARD CLASSIFICATION SYSTEM FOR USE IN COMPUTERIZED MATERIAL-MANAGEMENT SYSTEMS |
| BS 7164-7.1:1990 | Chemical tests for raw and vulcanized rubber. Methods for determination of polymer content Polyisoprene content |
| BS EN 61518:2001 | Mating dimensions between differential pressure (type) measuring instruments and flanged-on shut-off devices up to 413 bar (41,3 MPa) |
| ISO 11659-2:2004 | Textile machinery and accessories Machine parts in contact with textile processing oils Part 2: Determination of the impact on polymeric materials |
| BS ISO 2230:2002 | Rubber products. Guidelines for storage |
| 05/30127096 DC : DRAFT FEB 2005 | ISO 6149-4 - CONNECTIONS FOR FLUID POWER AND GENERAL USE - PORTS AND STUD ENDS WITH METRIC THREADS AND O-RING SEALING - PART 4: DIMENSIONS, DESIGN, TEST METHODS AND REQUIREMENTS FOR EXTERNAL HEX AND INTERNAL HEX PORT PLUGS |
| 04/30110375 DC : DRAFT MAR 2004 | BS ISO 248 - RUBBERS, RAW - DETERMINATION OF VOLATILE MATTER CONTENT |
| UNI EN 2838 : 2013 | AEROSPACE SERIES - CHLOROPRENE RUBBER (CR) - HEAT RESISTANCE - HARDNESS 70 IRHD |
| I.S. EN ISO 1043-1:2011 | PLASTICS - SYMBOLS AND ABBREVIATED TERMS - PART 1: BASIC POLYMERS AND THEIR SPECIAL CHARACTERISTICS (ISO 1043-1:2011) |
| BS ISO 4650:2012 | Rubber. Identification. Infrared spectrometric methods |
| PREN 3825 : DRAFT 2006 | AEROSPACE SERIES - FLUOROSILICONE RUBBER (FVMQ) - HARDNESS 60 IRHD |
| I.S. EN 2845:2013 | AEROSPACE SERIES - ACRYLONITRILE-BUTADIENE RUBBER (NBR) - FUEL AND SYNTHETIC OIL RESISTANT - HARDNESS 50 IRHD |
| BS ISO 1434:2016 | Natural rubber in bales. Amount of bale coating. Determination |
| PREN 2798 : 200P1 | AEROSPACE SERIES - FLUOROCARBON RUBBER (FKM) - LOW COMPRESSIONS SET - HARDNESS 80 IRHD |
| UNI EN 2847 : 2013 | AEROSPACE SERIES - ACRYLONITRILE-BUTADIENE RUBBER (NBR) - FUEL AND SYNTHETIC OIL RESISTANT - HARDNESS 70 IRHD |
| CSA C22.2 No. 0.17 : 2000 : R2004 | EVALUATION OF PROPERTIES OF POLYMERIC MATERIALS |
| BS ISO 22762-2:2005 | Elastomeric seismic-protection isolators Applications for bridges. Specifications |
| I.S. EN 2843:2013 | AEROSPACE SERIES - ACRYLONITRILE-BUTADIENE RUBBER (NBR) - MINERAL OIL RESISTANT - HARDNESS 80 IRHD |
| PREN 2838 : 200P1 | AEROSPACE SERIES - CHLOROPRENE RUBBER (CR) - HEAT RESSTANSE - HARDNESS 70 IRHD |
| PREN 2835 : 200P1 | AEROSPACE SERIES - CHLOROPRENE RUBBER (CR) - HEAT RESISTANCE - HARDNESS 40 IRHD |
| PREN 2849 : 200P1 | AEROSPACE SERIES - ACRYLONITRILE-BUTADIENE RUBBER (NBR) - FUEL AND SYNTHETIC OIL RESISTANT - HARDNESS 90 IRHD |
| PREN 2839 : 200P1 | AEROSPACE SERIES - CHLOPRENE RUBBER (CR) - HEAT RESSTANSE - HARDNESS 80 IRHD |
| PREN 2848 : 200P1 | AEROSPACE SERIES - ACRYLONITRILE-BUTADIENE RUBBER (NBR) - FUEL AND SYNTHETIC OIL RESISTANT - HARDNESS 80 IRHD |
| PREN 2842 : 200P1 | AEROSPACE SERIES - ACRYLONITRILE-BUTADIENE RUBBER (NBR) - MINERAL OIL RESISTANT - HARDNESS 70 IRHD |
| PREN 3697 : 200P1 | AEROSPACE SERIES - ACRYLONITRILE-BUTADIENE RUBBER (NBR) - LOW TEMPERATURE RESISTANT - HARDNESS 60 IRHD |
| SAE J 2643 : 2013 | STANDARD REFERENCE ELASTOMERS (SRE) FOR CHARACTERIZING THE EFFECT OF LIQUIDS ON VULCANIZED RUBBERS |
| I.S. EN 16821:2017 | RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES FOR USE IN THE PHARMACEUTICAL AND BIOTECHNOLOGICAL INDUSTRY - SILICONE RUBBER HOSES |
| UNI ISO 248-1 : 2012 | RUBBER, RAW - DETERMINATION OF VOLATILE-MATTER CONTENT - PART 1: HOT-MILL METHOD AND OVEN METHOD |
| ISO 9974-4:2016 | Connections for general use and fluid power — Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing — Part 4: Dimensions, design, test methods and requirements for external hex and internal hex port plugs |
| IEC TR 62392:2006 | Suitability of typical electrical insulating material (EIM) for polymer recycling |
| ISO 2475:2011 | Chloroprene rubber (CR) — General-purpose types — Evaluation procedure |
| UNI EN 2839 : 2013 | AEROSPACE SERIES - CHLOROPRENE RUBBER (CR) - HEAT RESISTANCE - HARDNESS 80 IRHD |
| BS EN ISO 18797-1:2017 | Petroleum, petrochemical and natural gas industries. External corrosion protection of risers by coatings and linings Elastomeric coating systems-polychloroprene or EPDM |
| UNE-EN 16821:2018 | Rubber and plastics hoses and hose assemblies for use in the pharmaceutical and biotechnological industry - Silicone rubber hoses |
| I.S. EN 2849:2013 | AEROSPACE SERIES - ACRYLONITRILE-BUTADIENE RUBBER (NBR) - FUEL AND SYNTHETIC OIL RESISTANT - HARDNESS 90 IRHD |
| ISO 6194-1:2007 | Rotary shaft lip-type seals incorporating elastomeric sealing elements — Part 1: Nominal dimensions and tolerances |
| BS EN ISO 1043-1:2011 | PLASTICS - SYMBOLS AND ABBREVIATED TERMS - PART 1: BASIC POLYMERS AND THEIR SPECIAL CHARACTERISTICS (ISO 1043-1:2011) |
| DIN EN 13397:2002-03 | INDUSTRIAL VALVES - DIAPHRAGM VALVES MADE OF METALLIC MATERIALS |
| ISO 14359:1997 | Winter-sports equipment — Marking of parts made of polymer materials |
| ISO 21049:2004 | Pumps Shaft sealing systems for centrifugal and rotary pumps |
| BS EN 14483-2:2004 | Vitreous and porcelain enamels. Determination of resistance to chemical corrosion Determination of resistance to chemical corrosion by boiling acids, neutral liquids and/or their vapours |
| BS EN ISO 21049:2004 | Pumps. Shaft sealing systems for centrifugal and rotary pumps |
| BS EN ISO 18064:2014 | Thermoplastic elastomers. Nomenclature and abbreviated terms |
| EN 13397:2001 | Industrial valves - Diaphragm valves made of metallic materials |
| EN 12756 : 2000 | MECHANICAL SEALS- PRINCIPAL DIMENSIONS, DESIGNATION AND MATERIAL CODES |
| UNI EN 12115 : 2011 | RUBBER AND THERMOPLASTICS HOSES AND HOSE ASSEMBLIES FOR LIQUID OR GASEOUS CHEMICALS - SPECIFICATION |
| EN 12351:2010 | Industrial valves - Protective caps for valves with flanged connections |
| DIN 3760:1996-09 | ROTARY SHAFT LIP SEALS |
| EN 62474:2012 | Material declaration for products of and for the electrotechnical industry |
| DIN ISO 15171-1:2004-05 | Connections for fluid power and general use - Hydraulic couplings for diagnostic purposes - Part 1: Coupling not for connection under pressure (ISO 15171-1:1999) |
| DIN 3771-3:1984-12 | O-RINGS FOR USE IN FLUID POWER SYSTEMS - MATERIALS AND FIELD OF APPLICATION |
| ISO 18064:2014 | Thermoplastic elastomers Nomenclature and abbreviated terms |
| ISO 1043-1:2011 | Plastics — Symbols and abbreviated terms — Part 1: Basic polymers and their special characteristics |
$79.15
Including GST where applicable
AUD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - English
PDF 1 User - English
PDF 3 Users - English
PDF 5 Users - English
PDF 9 Users - English
Hardcopy - French
PDF 1 User - French
PDF 3 Users - French
PDF 5 Users - French
PDF 9 Users - French
Hardcopy - Russian
PDF 1 User - Russian
PDF 3 Users - Russian
PDF 5 Users - Russian
PDF 9 Users - Russian
Hardcopy - English
PDF 1 User - English
PDF 3 Users - English
PDF 5 Users - English
PDF 9 Users - English
Hardcopy - French
PDF 1 User - French
PDF 3 Users - French
PDF 5 Users - French
PDF 9 Users - French
Hardcopy - Russian
PDF 1 User - Russian
PDF 3 Users - Russian
PDF 5 Users - Russian
PDF 9 Users - Russian
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.