Customer Support: 131 242

  • There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

ISO 18265:2013

Current
Current

The latest, up-to-date edition.

Metallic materials Conversion of hardness values
Available format(s)

Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users

Language(s)

English, French

Published date

19-09-2013

ISO 18265:2013 specifies the principles of the conversion of hardness values to equivalent values in other hardness scales and to estimates of tensile strength. It gives general information on the use of the conversion tables.

The conversion tables in Annexes A to G apply to unalloyed and low alloy steels and cast steel, steels for quenching and tempering, steels for cold working, high speed steels, tool steels, hardmetals, and non-ferrous metals and alloys.

Annex H gives information about the effects of changes of the test procedure in the standards specifying the hardness tests.

Converted values obtained using ISO 18265:2013 are only directly applicable to the exact material tested. For all other materials, they provide an indicator only. In all cases, the converted values are not intended as replacements for values obtained by the correct standard method. In particular, tensile strength estimates are the least reliable converted values in ISO 18265:2013.

DevelopmentNote
Supersedes ISO/DIS 18265. (09/2013)
DocumentType
Standard
Pages
85
ProductNote
THIS STANDARD ALSO CORRECTED VERSION FOR FRENCH FOR THE YEAR 2014
PublisherName
International Organization for Standardization
Status
Current
Supersedes

UNE-EN ISO 5182:2017 Resistance welding - Materials for electrodes and ancillary equipment (ISO 5182:2016)
BS EN ISO 19715:2017 Dentistry. Filling instrument with contra angle
DIN EN ISO 21457:2010-12 Petroleum, petrochemical and natural gas industries - Materials selection and corrosion control for oil and gas production systems (ISO 21457:2010)
12/30265276 DC : 0 BS EN 13001-3-3 - CRANES - GENERAL DESIGN - PART 3-3: LIMIT STATES AND PROOF OF COMPETENCE OF WHEEL/RAIL CONTACTS
13/30261096 DC : 0 BS EN ISO 17945 - MATERIALS RESISTANT TO SULFIDE STRESS CRACKING IN CORROSIVE PETROLEUM REFINING ENVIRONMENTS
14/30275471 DC : 0 BS ISO 18137-1 - LEAF SPRINGS - PART 1: TECHNICAL REQUIREMENTS AND TEST METHODS
13/30256266 DC : 0 BS ISO 683-18 - HEAT-TREATABLE STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 18: BRIGHT STEEL PRODUCTS
ISO 16253:2017 Watch-cases and accessories — Vapour phase deposited coatings
API 6A CHINESE : 2011 SPECIFICATION FOR WELLHEAD AND CHRISTMAS TREE EQUIPMENT
ISO 683-18:2014 Heat-treatable steels, alloy steels and free-cutting steels — Part 18: Bright steel products
DIN EN ISO 15156-2:2015-12 PETROLEUM AND NATURAL GAS INDUSTRIES - MATERIALS FOR USE IN H[2]S-CONTAINING ENVIRONMENTS IN OIL AND GAS PRODUCTION - PART 2: CRACKING-RESISTANT CARBON AND LOW-ALLOY STEELS, AND THE USE OF CAST IRONS (ISO 15156-2:2015)
BS EN ISO 13628-1 : 2005 PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 1: GENERAL REQUIREMENTS AND RECOMMENDATIONS
BS EN ISO 7153-1:2016 Surgical instruments. Materials Metals
UNE-EN 12513:2011 Founding - Abrasion resistant cast irons
EN 13001-3-3:2014 Cranes - General design - Part 3-3: Limit states and proof of competence of wheel/rail contacts
DIN EN 13001-3-3:2015-02 CRANES - GENERAL DESIGN - PART 3-3: LIMIT STATES AND PROOF OF COMPETENCE OF WHEEL/RAIL CONTACTS
EN 12513:2011 Founding - Abrasion resistant cast irons
EN ISO 6508-1:2016 Metallic materials - Rockwell hardness test - Part 1: Test method (ISO 6508-1:2016)
EN 10083-2:2006 Steels for quenching and tempering - Part 2: Technical delivery conditions for non alloy steels
AGMA 923C:2022 Metallurgical Specifications for Steel and Cast Iron Gearing
ISO 898-3:2018 Mechanical properties of fasteners made of carbon steel and alloy steel — Part 3: Flat washers with specified property classes
BS EN 4632-004:2012 Aerospace series. Weldability and brazeability of materials in aerospace constructions Welding and brazing of homogeneous assemblies of high alloyed steels
DIN ISO 14635-3:2011-08 Gears - FZG test procedures - Part 3: FZG test method A/2,8/50 for relative scuffing load-carrying capacity and wear characteristics of semifluid gear greases (ISO 14635-3:2005)
UNE-EN ISO 14713-3:2017 Zinc coatings - Guidelines and recommendations for the protection against corrosion of iron and steel in structures - Part 3: Sherardizing (ISO 14713-3:2017)
API 11D2 : 2010 PROGRESSING CAVITY PUMP SYSTEMS FOR ARTIFICIAL LIFT - PUMPS
BS ISO 29262:2011 Production equipment for microsystems. Interface between end effector and handling system
API 64 : 2017-08 DIVERTER EQUIPMENT SYSTEMS
UNE-EN 13001-3-3:2015 Cranes - General design - Part 3-3: Limit states and proof of competence of wheel/rail contacts
13/30252100 DC : 0 BS ISO 4990 - STEEL CASTINGS - GENERAL TECHNICAL DELIVERY REQUIREMENTS
08/30168345 DC : DRAFT JULY 2008 BS ISO 15136-1 - DOWNHOLE EQUIPMENT FOR PETROLEUM AND NATURAL GAS INDUSTRIES - PROGRESSING CAVITY PUMP SYSTEMS FOR ARTIFICIAL LIFT - PART 1: PUMPS
15/30289813 DC : 0 BS EN ISO 4545-1 - METALLIC MATERIALS - KNOOP HARDNESS TEST - PART 1: TEST METHOD
15/30312459 DC : 0 BS EN ISO 5182 - RESISTANCE WELDING - MATERIALS FOR ELECTRODES AND ANCILLARY EQUIPMENT
I.S. EN 4632-004:2012 AEROSPACE SERIES - WELDABILITY AND BRAZEABILITY OF MATERIALS IN AEROSPACE CONSTRUCTIONS - PART 004: WELDING AND BRAZING OF HOMOGENEOUS ASSEMBLIES OF HIGH ALLOYED STEELS
API SPEC 19TT : 2016 SPECIFICATION FOR DOWNHOLE WELL TEST TOOLS AND RELATED EQUIPMENT
BS EN ISO 17078-3:2009 Petroleum and natural gas industries. Drilling and production equipment Running tools, pulling tools and kick-over tools and latches for side-pocket mandrels
UNI EN ISO 21457 : 2010 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - MATERIALS SELECTION AND CORROSION CONTROL FOR OIL AND GAS PRODUCTION SYSTEMS
ISO 683-1:2016 Heat-treatable steels, alloy steels and free-cutting steels Part 1: Non-alloy steels for quenching and tempering
ISO/TR 16224:2012 Technical aspects of nut design
DIN EN ISO 19715:2016-03 (Draft) DENTISTRY - FILLING INSTRUMENT WITH CONTRA ANGLE (ISO 19715:2017)
UNI EN ISO 17078-3 : 2009 PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 3: RUNNING TOOLS, PULLING TOOLS AND KICK-OVER TOOLS AND LATCHES FOR SIDE-POCKET MANDRELS
EN ISO 6506-1:2014 Metallic materials - Brinell hardness test - Part 1: Test method (ISO 6506-1:2014)
DIN EN 15049:2007-12 Railway applications - Suspension components - Torsion bar, steel
UNE-EN ISO 6508-1:2017 Metallic materials - Rockwell hardness test - Part 1: Test method (ISO 6508-1:2016)
UNE-EN ISO 6506-1:2015 Metallic materials - Brinell hardness test - Part 1: Test method (ISO 6506-1:2014)
ISO 6508-1:2016 Metallic materials — Rockwell hardness test — Part 1: Test method
DIN EN 12513:2011-05 Founding - Abrasion resistant cast irons
I.S. EN ISO 7153-1:2016 SURGICAL INSTRUMENTS - MATERIALS - PART 1: METALS (ISO 7153-1:2016)
I.S. EN ISO 6506-1:2014 METALLIC MATERIALS - BRINELL HARDNESS TEST - PART 1: TEST METHOD (ISO 6506-1:2014)
I.S. EN ISO 15136-1:2009 PETROLEUM AND NATURAL GAS INDUSTRIES - PROGRESSING CAVITY PUMP SYSTEMS FOR ARTIFICIAL LIFT - PART 1: PUMPS
I.S. EN ISO 15156-2:2015&LC:2015 PETROLEUM AND NATURAL GAS INDUSTRIES - MATERIALS FOR USE IN H[2]S-CONTAINING ENVIRONMENTS IN OIL AND GAS PRODUCTION - PART 2: CRACKING-RESISTANT CARBON AND LOW-ALLOY STEELS, AND THE USE OF CAST IRONS (ISO 15156-2:2015)
I.S. EN ISO 6507-1:2018 METALLIC MATERIALS - VICKERS HARDNESS TEST - PART 1: TEST METHOD (ISO 6507-1:2018)
I.S. EN ISO 10423:2009 PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - WELLHEAD AND CHRISTMAS TREE EQUIPMENT
EN ISO 15156-2:2015 Petroleum and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Part 2: Cracking-resistant carbon and low alloy steels, and the use of cast irons (ISO 15156-2:2015)
I.S. EN ISO 13628-1:2006 PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 1: GENERAL REQUIREMENTS AND RECOMMENDATIONS
I.S. EN 10083-2:2006 STEELS FOR QUENCHING AND TEMPERING - PART 2: TECHNICAL DELIVERY CONDITIONS FOR NON ALLOY STEELS
I.S. EN 12513:2011 FOUNDING - ABRASION RESISTANT CAST IRONS
I.S. EN ISO 6508-1:2016 METALLIC MATERIALS - ROCKWELL HARDNESS TEST - PART 1: TEST METHOD (ISO 6508-1:2016)
VDI 3388:2012-03 Materials for trimming and forming dies
VDI 2737 : 2016 COR 2018 CALCULATION OF THE LOAD CAPACITY OF THE TOOTH ROOT IN INTERNAL TOOTHINGS WITH INFLUENCE OF THE GEAR RIM
VDI 3405 Blatt 2:2013-08 Additive manufacturing processes, rapid manufacturing - Beam melting of metallic parts - Qualification, quality assurance and post processing
DIN ISO 29262:2013-03 Production equipment for microsystems - Interface between end effector and handling system (ISO 29262:2011)
EN ISO 4545-1:2018 Metallic materials - Knoop hardness test - Part 1: Test method (ISO 4545-1:2017)
API 16A : 2017 SPECIFICATION FOR DRILL-THROUGH EQUIPMENT
BS EN 13001-3-3:2014 Cranes. General design Limit states and proof of competence of wheel/rail contacts
BS ISO 14635-3:2005 Gears. FZG test procedures FZG test method A/2, 8/50 for relative scuffing load-carrying capacity and wear characteristics of semifluid gear greases
DIN EN 13001-3-3 E : 2015 CRANES - GENERAL DESIGN - PART 3-3: LIMIT STATES AND PROOF OF COMPETENCE OF WHEEL/RAIL CONTACTS
BS ISO 4990:2015 Steel castings. General technical delivery requirements
ISO 6507-1:2018 Metallic materials — Vickers hardness test — Part 1: Test method
DIN EN ISO 14713-3:2010-05 ZINC COATINGS - GUIDELINES AND RECOMMENDATIONS FOR THE PROTECTION AGAINST CORROSION OF IRON AND STEEL IN STRUCTURES - PART 3: SHERARDIZING (ISO 14713-3:2017)
DIN EN ISO 17945 E : 2015 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - METALLIC MATERIALS RESISTANT TO SULFIDE STRESS CRACKING IN CORROSIVE PETROLEUM REFINING ENVIRONMENTS (ISO 17945:2015)
I.S. EN ISO 5182:2016 RESISTANCE WELDING - MATERIALS FOR ELECTRODES AND ANCILLARY EQUIPMENT (ISO 5182:2016)
09/30192800 DC : 0 BS ISO 29262 - PRODUCTION EQUIPMENT FOR MICROSYSTEMS - INTERFACE BETWEEN GRIPPERS AND HANDLING SYSTEM
I.S. EN ISO 14713-3:2017 ZINC COATINGS - GUIDELINES AND RECOMMENDATIONS FOR THE PROTECTION AGAINST CORROSION OF IRON AND STEEL IN STRUCTURES - PART 3: SHERARDIZING (ISO 14713-3:2017)
11/30230615 DC : 0 BS ISO 683-1 - HEAT-TREATABLE STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 1: NON-ALLOY STEELS FOR QUENCHING AND TEMPERING
BS ISO 18137:2015 Leaf springs. Technical specifications
BS EN ISO 5182:2009 Resistance welding. Materials for electrodes and ancillary equipment
API 16AR : 2017 STANDARD FOR REPAIR AND REMANUFACTURE OF DRILL-THROUGH EQUIPMENT
I.S. EN ISO 17945:2015 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - METALLIC MATERIALS RESISTANT TO SULFIDE STRESS CRACKING IN CORROSIVE PETROLEUM REFINING ENVIRONMENTS (ISO 17945:2015)
I.S. EN ISO 13918:2018 WELDING - STUDS AND CERAMIC FERRULES FOR ARC STUD WELDING (ISO 13918:2017)
API 19V : 2013 SUBSURFACE BARRIER VALVES AND RELATED EQUIPMENT
EN ISO 13918:2018 Welding - Studs and ceramic ferrules for arc stud welding (ISO 13918:2017, Corrected version 2018-05)
ISO 11891:2012 Hot formed helical compression springs — Technical specifications
EN ISO 6507-1:2018 Metallic materials - Vickers hardness test - Part 1: Test method (ISO 6507-1:2018)
I.S. EN ISO 17078-3:2009 PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 3: RUNNING TOOLS, PULLING TOOLS AND KICK-OVER TOOLS AND LATCHES FOR SIDE-POCKET MANDRELS
ISO 6336-5:2016 Calculation of load capacity of spur and helical gears Part 5: Strength and quality of materials
ISO 21457:2010 Petroleum, petrochemical and natural gas industries — Materials selection and corrosion control for oil and gas production systems
UNI EN 12513 : 2011 Founding - Abrasion resistant cast irons
UNI EN ISO 13628-1 : 2010 PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 1: GENERAL REQUIREMENTS AND RECOMMENDATIONS
UNI EN ISO 28781 : 2010 PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - SUBSURFACE BARRIER VALVES AND RELATED EQUIPMENT
DIN EN ISO 19715 E : 2017 DENTISTRY - FILLING INSTRUMENT WITH CONTRA ANGLE (ISO 19715:2017)
10/30198921 DC : 0 BS ISO 11891 - HOT FORMED HELICAL COMPRESSION SPRINGS - TECHNICAL SPECIFICATIONS
DIN EN ISO 14713-3 E : 2010 ZINC COATINGS - GUIDELINES AND RECOMMENDATIONS FOR THE PROTECTION AGAINST CORROSION OF IRON AND STEEL IN STRUCTURES - PART 3: SHERARDIZING (ISO 14713-3:2017)
PD ISO/TR 16224:2012 Technical aspects of nut design
ISO 29262:2011 Production equipment for microsystems Interface between end effector and handling system
15/30269176 DC : 0 BS ISO 6336-5 - CALCULATION OF LOAD CAPACITY OF SPUR AND HELICAL GEARS - PART 5: STRENGTH AND QUALITY OF MATERIALS
BS ISO 21988:2006 Abrasion-resistant cast irons. Classification
17/30323194 DC : 0 BS EN ISO 20569 - DENTISTRY - TREPHINE BURS
16/30290355 DC : 0 BS EN ISO 6507-1 - METALLIC MATERIALS - VICKERS HARDNESS TEST - PART 1: TEST METHOD
16/30342991 DC : 0 BS EN ISO 13918 - WELDING - STUDS AND CERAMIC FERRULES FOR ARC STUD WELDING
BS EN ISO 21457:2010 Petroleum, petrochemical and natural gas industries. Materials selection and corrosion control for oil and gas production systems
09/30154810 DC : 0 BS EN ISO 28781 - PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - SUBSURFACE VALVES AND RELATED EQUIPMENT
08/30141132 DC : DRAFT APR 2008 BS EN ISO 10423 - PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - WELLHEAD AND CHRISTMAS TREE EQUIPMENT
API 6A : 2010 SPECIFICATION FOR WELLHEAD AND CHRISTMAS TREE EQUIPMENT
API 19G3 : 2011 RUNNING TOOLS, PULLING TOOLS, AND KICK-OVER TOOLS AND LATCHES FOR SIDE-POCKET MANDRELS
ISO 18137:2015 Leaf springs Technical specifications
ISO 4990:2015 Steel castings — General technical delivery requirements
I.S. EN ISO 21457:2010 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - MATERIALS SELECTION AND CORROSION CONTROL FOR OIL AND GAS PRODUCTION SYSTEMS
ISO 4545-1:2017 Metallic materials — Knoop hardness test — Part 1: Test method
I.S. EN ISO 4545-1:2018 METALLIC MATERIALS - KNOOP HARDNESS TEST - PART 1: TEST METHOD (ISO 4545-1:2017)
EN ISO 13628-1:2005/A1:2010 PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 1: GENERAL REQUIREMENTS AND RECOMMENDATIONS
DIN EN 15049 E : 2007 RAILWAY APPLICATIONS - SUSPENSION COMPONENTS - TORSION BAR, STEEL
ISO 19715:2017 Dentistry — Filling instrument with contra angle
ISO 14713-3:2017 Zinc coatings — Guidelines and recommendations for the protection against corrosion of iron and steel in structures — Part 3: Sherardizing
BS EN ISO 15156-2:2015 Petroleum and natural gas industries. Materials for use in H2S-containing environments in oil and gas production Cracking-resistant carbon and low alloy steels, and the use of cast irons
BS EN 12513:2011 Founding. Abrasion resistant cast irons
ISO 13628-1:2005 Petroleum and natural gas industries — Design and operation of subsea production systems — Part 1: General requirements and recommendations
ISO 7153-1:2016 Surgical instruments Materials Part 1: Metals
ISO 14635-3:2005 Gears — FZG test procedures — Part 3: FZG test method A/2, 8/50 for relative scuffing load-carrying capacity and wear characteristics of semifluid gear greases
UNE-EN ISO 7153-1:2017 Surgical instruments - Materials - Part 1: Metals (ISO 7153-1:2016)
BS EN 10083-2:2006 Steels for quenching and tempering Technical delivery conditions for non alloy steels
BS EN ISO 10423:2009 Petroleum and natural gas industries. Drilling and production equipment. Wellhead and christmas tree equipment CD-ROM
ISO 10423:2009 Petroleum and natural gas industries Drilling and production equipment Wellhead and christmas tree equipment
ISO 15136-1:2009 Petroleum and natural gas industries — Progressing cavity pump systems for artificial lift — Part 1: Pumps
ISO 15156-2:2015 Petroleum and natural gas industries Materials for use in H2S-containing environments in oil and gas production Part 2: Cracking-resistant carbon and low-alloy steels, and the use of cast irons
BS EN 15049:2007 Railway applications. Suspension components. Torsion bar, steel
ISO 5182:2016 Resistance welding Materials for electrodes and ancillary equipment
ISO 17078-3:2009 Petroleum and natural gas industries Drilling and production equipment Part 3: Running tools, pulling tools and kick-over tools and latches for side-pocket mandrels
BS EN ISO 6506-1:2014 Metallic materials. Brinell hardness test Test method
ISO 17945:2015 Petroleum, petrochemical and natural gas industries Metallic materials resistant to sulfide stress cracking in corrosive petroleum refining environments
EN ISO 14713-3:2017 Zinc coatings - Guidelines and recommendations for the protection against corrosion of iron and steel in structures - Part 3: Sherardizing (ISO 14713-3:2017)
EN ISO 17945:2015 Petroleum, petrochemical and natural gas industries - Metallic materials resistant to sulfide stress cracking in corrosive petroleum refining environments (ISO 17945:2015)
EN ISO 15136-1:2009 Petroleum and natural gas industries - Progressing cavity pump systems for artificial lift - Part 1: Pumps (ISO 15136-1:2009)
EN ISO 17078-3:2009 Petroleum and natural gas industries - Drilling and production equipment - Part 3: Running tools, pulling tools and kick-over tools and latches for side-pocket mandrels (ISO 17078-3:2009)
EN ISO 7153-1:2016 Surgical instruments - Materials - Part 1: Metals (ISO 7153-1:2016)
EN 15049:2007 Railway applications - Suspension components - Torsion bar, steel
EN ISO 5182:2016 RESISTANCE WELDING - MATERIALS FOR ELECTRODES AND ANCILLARY EQUIPMENT (ISO 5182:2016)
EN ISO 10423:2009 Petroleum and natural gas industries - Drilling and production equipment - Wellhead and christmas tree equipment (ISO 10423:2009)
EN ISO 19715:2017 Dentistry - Filling instrument with contra angle (ISO 19715:2017)
EN ISO 21457:2010 Petroleum, petrochemical and natural gas industries - Materials selection and corrosion control for oil and gas production systems (ISO 21457:2010)
EN 4632-004:2012 Aerospace series - Weldability and brazeability of materials in aerospace constructions - Part 004: Welding and brazing of homogeneous assemblies of high alloyed steels
EN ISO 28781:2010 Petroleum and natural gas industries - Drilling and production equipment - Subsurface barrier valves and related equipment (ISO 28781:2010)
PREN 10253-2 : DRAFT 2017 BUTT-WELDING PIPE FITTINGS - PART 2: NON ALLOY AND FERRITIC ALLOY STEELS WITH SPECIFIC INSPECTION REQUIREMENTS
DIN ISO 29262 E : 2013 PRODUCTION EQUIPMENT FOR MICROSYSTEMS - INTERFACE BETWEEN END EFFECTOR AND HANDLING SYSTEM (ISO 29262:2011)
BS EN ISO 28781:2010 Petroleum and natural gas industries. Drilling and production equipment. Subsurface barrier valves and related equipment
ISO 13918:2017 Welding — Studs and ceramic ferrules for arc stud welding
API 6A REDLINE : 2010 SPECIFICATION FOR WELLHEAD AND CHRISTMAS TREE EQUIPMENT
ISO 21988:2006 Abrasion-resistant cast irons Classification
BS ISO 11891:2012 Hot formed helical compression springs. Technical specifications
BS EN ISO 17945:2015 Petroleum, petrochemical and natural gas industries. Metallic materials resistant to sulfide stress cracking in corrosive petroleum refining environments
13/30263770 DC : 0 BS ISO 6506-1 - METALLIC MATERIALS - BRINELL HARDNESS TEST - PART 1: TEST METHOD
BS EN ISO 14713-3:2017 Zinc coatings. Guidelines and recommendations for the protection against corrosion of iron and steel in structures Sherardizing
DIN EN ISO 17945:2015-08 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - METALLIC MATERIALS RESISTANT TO SULFIDE STRESS CRACKING IN CORROSIVE PETROLEUM REFINING ENVIRONMENTS (ISO 17945:2015)
UNI EN 4632-004 : 2014 AEROSPACE SERIES - WELDABILITY AND BRAZEABILITY OF MATERIALS IN AEROSPACE CONSTRUCTIONS - PART 004: WELDING AND BRAZING OF HOMOGENEOUS ASSEMBLIES OF HIGH ALLOYED STEELS
I.S. EN ISO 28781:2010 PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - SUBSURFACE BARRIER VALVES AND RELATED EQUIPMENT
BS ISO 6336-5:2016 Calculation of load capacity of spur and helical gears Strength and quality of materials
17/30335249 DC : 0 BS EN ISO 898-3 - MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 3: FLAT WASHERS WITH SPECIFIED PROPERTY CLASSES
BS ISO 5182 : 2008 RESISTANCE WELDING - MATERIALS FOR ELECTRODES AND ANCILLARY EQUIPMENT
05/30132598 DC : DRAFT APR 2005 EN 10083-2 - STEELS FOR QUENCHING AND TEMPERING - PART 2: TECHNICAL DELIVERY CONDITIONS FOR NON ALLOYS STEELS
I.S. EN 13001-3-3:2014 CRANES - GENERAL DESIGN - PART 3-3: LIMIT STATES AND PROOF OF COMPETENCE OF WHEEL/RAIL CONTACTS
I.S. EN ISO 19715:2017 DENTISTRY - FILLING INSTRUMENT WITH CONTRA ANGLE (ISO 19715:2017)
API 16A : 2017 : INC : ERR 1+ERR2+ADD1 : 2018 SPECIFICATION FOR DRILL-THROUGH EQUIPMENT
17/30353548 DC : 0 BS EN 10277 - BRIGHT STEEL PRODUCTS - TECHNICAL DELIVERY CONDITIONS
DIN EN ISO 6506-1:2015-02 METALLIC MATERIALS - BRINELL HARDNESS TEST - PART 1: TEST METHOD (ISO 6506-1:2014)
ISO 28781:2010 Petroleum and natural gas industries Drilling and production equipment Subsurface barrier valves and related equipment
BS EN ISO 6508-1:2015 Metallic materials. Rockwell hardness test Test method
BS EN ISO 15136-1:2001 Downhole equipment for petroleum and natural gas industries. Progressing cavity pump systems for artificial lift Pumps
ISO 6506-1:2014 Metallic materials Brinell hardness test Part 1: Test method
SAE USCAR5-5:2019 AVOIDANCE OF HYDROGEN EMBRITTLEMENT OF STEEL FASTENERS AND OTHER HARDENED OR SPRING STEEL PARTS FROM SURFACE COATING PROCESSES

ISO 6507-1:2005 Metallic materials Vickers hardness test Part 1: Test method
AS/NZS ISO 13918:2020 Welding - Studs and ceramic ferrules for arc stud welding
ISO 6506-1:2014 Metallic materials Brinell hardness test Part 1: Test method
ISO 6508-1:2016 Metallic materials — Rockwell hardness test — Part 1: Test method
ISO 6507-2:2005 Metallic materials Vickers hardness test Part 2: Verification and calibration of testing machines
ISO 6892-1:2016 Metallic materials Tensile testing Part 1: Method of test at room temperature
ISO 4957:1999 Tool steels
ISO 9513:2012 Metallic materials — Calibration of extensometer systems used in uniaxial testing
ISO 6508-2:2015 Metallic materials — Rockwell hardness test — Part 2: Verification and calibration of testing machines and indenters
ISO 4964:1984 Steel Hardness conversions
EN 10083-1:2006 Steels for quenching and tempering - Part 1: General technical delivery conditions
ISO 7500-1:2015 Metallic materials Calibration and verification of static uniaxial testing machines Part 1: Tension/compression testing machines Calibration and verification of the force-measuring system
ISO/TR 10108:1989 Steel Conversion of hardness values to tensile strength values
DIN 17200:1987-03 STEELS FOR QUENCHING AND TEMPERING - TECHNICAL DELIVERY CONDITIONS

View more information
$407.06
Including GST where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Need help?
Call us on 131 242, then click here to start a Screen Sharing session
so we can help right away! Learn more