Customer Support: 131 242

  • There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

ISO 23529:2016

Current
Current

The latest, up-to-date edition.

Rubber General procedures for preparing and conditioning test pieces for physical test methods
Available format(s)

Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users

Language(s)

French, English

Published date

27-10-2016

ISO 23529:2016 specifies general procedures for the preparation, measurement, marking, storage, and conditioning of rubber test pieces for use in physical tests specified in other International Standards, and the preferred conditions to be used during the tests. Special conditions, applicable to a particular test or material or simulating a particular climatic environment, are not included, nor are special requirements for testing whole products.

ISO 23529:2016 also specifies the requirements for the time interval to be observed between forming and testing of rubber test pieces and products. Such requirements are necessary to obtain reproducible test results and to minimize disagreements between customer and supplier.

DevelopmentNote
Supersedes ISO 3383, ISO 4661-1, ISO 471 and ISO 4648. (09/2004) Supersedes ISO/DIS 23529. (10/2016)
DocumentType
Standard
Pages
17
PublisherName
International Organization for Standardization
Status
Current
Supersedes

ISO 4642-1:2015 Rubber and plastics hoses, non-collapsible, for fire-fighting service Part 1: Semi-rigid hoses for fixed systems
ISO 23794:2015 Rubber, vulcanized or thermoplastic — Abrasion testing — Guidance
12/30255141 DC : 0 BS ISO 17278 - RUBBER, RAW NATURAL - DETERMINATION OF GEL CONTENT OF TECHNICALLY SPECIFIED RUBBER (TSR)
BS ISO 5603:2017 Rubber, vulcanized. Determination of adhesion to wire cord
ISO 4642-2:2015 Rubber and plastics hoses, non-collapsible, for fire-fighting service Part 2: Semi-rigid hoses (and hose assemblies) for pumps and vehicles
ISO 178:2010 Plastics Determination of flexural properties
BS ISO 2782-1:2016 Rubber, vulcanized or thermoplastic. Determination of permeability to gases Differential-pressure methods
06/30133200 DC : DRAFT APR 2006 EN ISO 5999 - FLEXIBLE CELLULAR POLYMERIC MATERIALS - POLYURETHANE FOAM FOR LOAD-BEARING APPLICATIONS EXCLUDING CARPET UNDERLAY - SPECIFICATION
DIN ISO 4649:2014-03 Rubber, vulcanized or thermoplastic - Determination of abrasion resistance using a rotating cylindrical drum device (ISO 4649:2010)
BS ISO 4662:2017 Rubber, vulcanized or thermoplastic. Determination of rebound resilience
BS ISO 1658:2015 Natural rubber (NR). Evaluation procedure
12/30212874 DC : 0 BS EN ISO 6808 - PLASTICS HOSES AND HOSE ASSEMBLIES FOR SUCTION AND LOW-PRESSURE DISCHARGE OF PETROLEUM LIQUIDS - SPECIFICATION
12/30254715 DC : 0 BS EN ISO 5999 - FLEXIBLE CELLULAR POLYMERIC MATERIALS - POLYURETHANE FOAM FOR LOAD-BEARING APPLICATIONS EXCLUDING CARPET UNDERLAY - SPECIFICATION
NF ISO 188 : 2011 RUBBER, VULCANIZED OR THERMOPLASTIC - ACCELERATED AGEING AND HEAT RESISTANCE TESTS
BS ISO 4647:2010 Rubber, vulcanized. Determination of static adhesion to textile cord. H-pull test
ISO 34-1:2015 Rubber, vulcanized or thermoplastic Determination of tear strength Part 1: Trouser, angle and crescent test pieces
07/30164313 DC : 0 BS ISO 28702 - RUBBER AND PLASTICS HOSES - SUB-AMBIENT TEMPERATURE CRUSH TEST
BS ISO 9924-3:2009 Rubber and rubber products. Determination of the composition of vulcanizates and uncured compounds by thermogravimetry Hydrocarbon rubbers, halogenated rubbers and polysiloxane rubbers after extraction
BS ISO 289-1:2015 Rubber, unvulcanized. Determinations using a shearing-disc viscometer Determination of Mooney viscosity
UNI ISO 4664-1 : 2012 RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF DYNAMIC PROPERTIES - PART 1: GENERAL GUIDANCE
07/30164024 DC : 0 BS ISO 23233 - RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF RESISTANCE TO ABRASION USING A DRIVEN, VERTICAL ABRASIVE DISC
09/30181563 DC : 0 BS ISO 22762-1 - ELASTOMERIC SEISMIC-PROTECTION ISOLATORS - PART 1: TEST METHODS
BS ISO 4664-1:2011 Rubber, vulcanized or thermoplastic. Determination of dynamic properties General guidance
17/30357593 DC : 0 BS ISO 4666-4 - RUBBER, VULCANIZED - DETERMINATION OF TEMPERATURE RISE AND RESISTANCE TO FATIGUE IN FLEXOMETER TESTING - PART 4: CONSTANT-STRESS FLEXOMETER
13/30265630 DC : 0 BS ISO 2322 - STYRENE-BUTADIENE RUBBER (SBR) - EMULSION- AND SOLUTION-POLYMERIZED TYPES - EVALUATION PROCEDURES
BS ISO 24453:2008 Rubber. Acquisition and presentation of comparable single-point data
UNE-EN ISO 10619-3:2012 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 3: Bending tests at high and low temperatures (ISO 10619-3:2011)
13/30269270 DC : 0 BS EN ISO 8030 - RUBBER AND PLASTICS HOSES - METHOD OF TEST FOR FLAMMABILITY
DIN ISO 27588:2014-12 RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF DEAD-LOAD HARDNESS USING THE VERY LOW RUBBER HARDNESS (VLRH) SCALE (ISO 27588:2012)
ISO 3302-2:2008 Rubber Tolerances for products Part 2: Geometrical tolerances
ISO 9026:2007 Raw rubber or unvulcanized compounds Determination of green strength
05/30133330 DC : DRAFT MAY 2005 ISO 4665 - RUBBER, VULCANIZED OR THERMOPLASTIC - RESISTANCE TO WEATHERING
07/30148751 DC : 0 BS ISO 2439 - FLEXIBLE CELLULAR POLYMERIC MATERIALS - DETERMINATION OF HARDNESS (INDENTATION TECHNIQUE)
ISO 9563:2015 Belt drives Electrical conductivity of antistatic endless synchronous belts Characteristics and test method
ISO 10619-2:2017 Rubber and plastics hoses and tubing Measurement of flexibility and stiffness Part 2: Bending tests at sub-ambient temperatures
NF ISO 2921 : 2011 RUBBER, VULCANIZED - DETERMINATION OF LOW-TEMPERATURE RETRACTION (TR TEST)
11/30231429 DC : 0 BS ISO 3384-2 - RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF STRESS RELAXATION IN COMPRESSION - PART 2: WITH TEMPERATURE CYCLING
07/30164021 DC : 0 BS ISO 27588 - RUBBER, VULCANIZED OR THERMOSET - DETERMINATION OF DEAD-LOAD HARDNESS USING THE VERY LOW RUBBER HARDNESS (VLRH) SCALE
07/30151253 DC : 0 BS ISO 25518 - DIPPED NATURAL-RUBBER GLOVES FOR MULTIPURPOSE APPLICATION - SPECIFICATION
ISO 20872:2018 Footwear — Test methods for outsoles — Tear strength
BS ISO 5600:2017 Rubber. Determination of adhesion to rigid materials using conical shaped parts
BS EN ISO 30013:2011 Rubber and plastics hoses. Methods of exposure to laboratory light sources. Determination of changes in colour, appearance and other physical properties
ISO 1431-1:2012 Rubber, vulcanized or thermoplastic Resistance to ozone cracking Part 1: Static and dynamic strain testing
BS ISO 2781 : 2008 RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF DENSITY
BS ISO 1813:2014 Belt drives. V-ribbed belts, joined V-belts and V-belts including wide section belts and hexagonal belts. Electrical conductivity of antistatic belts: Characteristics and methods of test
07/30148747 DC : 0 EN ISO 8067 - FLEXIBLE CELLULAR POLYMERIC MATERIALS - DETERMINATION OF TEAR STRENGTH
12/30261828 DC : 0 BS ISO 815-2 - RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF COMPRESSION SET - PART 2: AT LOW TEMPERATURES
09/30193382 DC : 0 BS ISO 4647 - RUBBER, VULCANIZED - DETERMINATION OF STATIC ADHESION TO TEXTILE CORD - H-PULL TEST
DIN EN ISO 16012:2016-02 PLASTICS - DETERMINATION OF LINEAR DIMENSIONS OF TEST SPECIMENS (ISO 16012:2015)
17/30355057 DC : 0 BS ISO 2781 - RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF DENSITY
16/30343609 DC : 0 BS ISO 22768 - RUBBER, RAW - DETERMINATION OF THE GLASS TRANSITION TEMPERATURE BY DIFFERENTIAL SCANNING CALORIMETRY (DSC)
DIN ISO 13226:2015-12 Rubber - Standard reference elastomers (SREs) for characterizing the effect of liquids on vulcanized rubbers (ISO 13226:2011)
ISO 8789:2009 Rubber hoses and hose assemblies for liquefied petroleum gas in motor vehicles Specification
15/30318244 DC : 0 BS ISO 37 - RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF TENSILE STRESS-STRAIN PROPERTIES
UNI ISO 8013 : 2013 RUBBER, VULCANIZED - DETERMINATION OF CREEP IN COMPRESSION OR SHEAR
ISO 1817:2015 Rubber, vulcanized or thermoplastic Determination of the effect of liquids
12/30243764 DC : 0 BS ISO 2285 - RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF TENSION SET UNDER CONSTANT ELONGATION, AND OF TENSION SET, ELONGATION AND CREEP UNDER CONSTANT TENSILE LOAD
BS ISO 18437-4:2008 Mechanical vibration and shock. Characterization of the dynamic mechanical properties of visco-elastic materials Dynamic stiffness method
BS ISO 1817:2015 Rubber, vulcanized or thermoplastic. Determination of the effect of liquids
BS ISO 2302:2014 Isobutene-isoprene rubber (IIR). Evaluation procedure
12/30269005 DC : 0 BS EN 1844 - FLEXIBLE SHEETS FOR WATERPROOFING - DETERMINATION OF RESISTANCE TO OZONE - PLASTIC AND RUBBER SHEETS FOR ROOF WATERPROOFING
12/30246396 DC : 0 BS ISO 1813 - BELT DRIVES - V-RIBBED BELTS, JOINED V-BELTS AND V-BELTS INCLUDING WIDE SECTION BELTS AND HEXAGONAL BELTS - ELECTRICAL CONDUCTIVITY OF ANTISTATIC BELTS: CHARACTERISTICS AND METHODS OF TEST
05/30133103 DC : DRAFT MAY 2005 ISO 4664-2 - RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF DYNAMIC PROPERTIES - PART 2: TORSION PENDULUM METHODS AT LOW FREQUENCIES
BS ISO 24454:2008 Rubber. Acquisition and presentation of comparable multi-point data
06/30149355 DC : 0 EN ISO 1798 - FLEXIBLE CELLULAR POLYMERIC MATERIALS - DETERMINATION OF TENSILE STRENGTH AND ELONGATION AT BREAK
DIN EN ISO 3821:2016-10 (Draft) GAS WELDING EQUIPMENT - RUBBER HOSES FOR WELDING, CUTTING AND ALLIED PROCESSES
BS ISO 22768:2017 Rubber, raw. Determination of the glass transition temperature by differential scanning calorimetry (DSC)
BS ISO 9631:2018 Rubber seals. Joint rings for pipelines for hot-water supply up to 110 °C. Specification for the material
BS ISO 2475:2011 Chloroprene rubber (CR). General-purpose types. Evaluation procedure
07/30148755 DC : 0 BS ISO 24999 - FLEXIBLE CELLULAR POLYMERIC MATERIALS - DETERMINATION OF FATIGUE BY CONSTANT STRAIN PROCEDURE
07/30166152 DC : 0 BS ISO 2930 AMD1 - RUBBER, RAW NATURAL - DETERMINATION OF PLASTICITY RETENTION INDEX (PRI)
BS ISO 814:2017 Rubber, vulcanized or thermoplastic. Determination of adhesion to metal. Two-plate method
09/30176542 DC : 0 BS EN ISO 30013 - RUBBER AND THERMOPLASTICS HOSES - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - DETERMINATION OF CHANGES IN COLOUR, APPEARANCE AND OTHER PHYSICAL PROPERTIES
07/30161736 DC : 0 BS ISO 9924-3 - RUBBER AND RUBBER PRODUCTS - DETERMINATION OF THE COMPOSITION OF VULCANIZATES AND UNCURED COMPOUNDS BY THERMOGRAVIMETRY - PART 3: HYDROCARBON RUBBERS, HALOGENATED RUBBERS AND POLYSILOXANE RUBBERS AFTER EXTRACTION
NF ISO 4647 : 2010 RUBBER, VULCANIZED - DETERMINATION OF STATIC ADHESION TO TEXTILE CORD - H-PULL TEST
07/30144606 DC : 0 ISO 2393 - RUBBER TEST MIXES - PREPARATION, MIXING AND VULCANISATION - EQUIPMENT AND PROCEDURES
DIN ISO 132:2015-06 RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF FLEX CRACKING AND CRACK GROWTH (DE MATTIA) (ISO 132:2011)
ISO 4665:2016 Rubber, vulcanized or thermoplastic — Resistance to weathering
ISO 37:2017 Rubber, vulcanized or thermoplastic — Determination of tensile stress-strain properties
UNI EN ISO 10619-2 : 2012 RUBBER AND PLASTICS HOSES AND TUBING - MEASUREMENT OF FLEXIBILITY AND STIFFNESS - PART 2: BENDING TESTS AT SUB-AMBIENT TEMPERATURES
BS ISO 13226:2011 Rubber. Standard reference elastomers (SREs) for characterizing the effect of liquids on vulcanized rubbers
ISO 4666-3:2016 Rubber, vulcanized — Determination of temperature rise and resistance to fatigue in flexometer testing — Part 3: Compression flexometer (constant-strain type)
ISO 5603:2017 Rubber, vulcanized — Determination of adhesion to wire cord
ONORM EN 13832-1 : 2006 FOOTWEAR PROTECTING AGAINST CHEMICALS - PART 1: TERMINOLOGY AND TEST METHODS
ISO 8013:2012 Rubber, vulcanized Determination of creep in compression or shear
ISO 7323:2006 Rubber, raw and unvulcanized compounded — Determination of plasticity number and recovery number — Parallel-plate method
I.S. EN ISO 10619-1:2018 RUBBER AND PLASTICS HOSES AND TUBING - MEASUREMENT OF FLEXIBILITY AND STIFFNESS - PART 1: BENDING TESTS AT AMBIENT TEMPERATURE (ISO 10619-1:2017)
17/30328799 DC : 0 BS EN 549 - RUBBER MATERIALS FOR SEALS AND DIAPHRAGMS FOR GAS APPLIANCES AND GAS EQUIPMENT
I.S. EN 15889:2011 FIRE-FIGHTING HOSES - TEST METHODS
I.S. EN ISO 8029:2014 PLASTICS HOSE - GENERAL-PURPOSE COLLAPSIBLE WATER HOSE, TEXTILE-REINFORCED - SPECIFICATION (ISO 8029:2014)
BS ISO 1431-1:2012 Rubber, vulcanized or thermoplastic. Resistance to ozone cracking Static and dynamic strain testing
DIN EN ISO 10619-1:2012-03 RUBBER AND PLASTICS HOSES AND TUBING - MEASUREMENT OF FLEXIBILITY AND STIFFNESS - PART 1: BENDING TESTS AT AMBIENT TEMPERATURE (ISO 10619-1:2011)
ISO 18437-5:2011 Mechanical vibration and shock — Characterization of the dynamic mechanical properties of visco-elastic materials — Part 5: Poisson ratio based on comparison between measurements and finite element analysis
ISO 28702:2008 Rubber and plastics hoses and tubing Textile-reinforced types Sub-ambient temperature crush test
NF ISO 13226 : 2011 RUBBER - STANDARD REFERENCE ELASTOMERS (SRES) FOR CHARACTERIZING THE EFFECT OF LIQUIDS ON VULCANIZED RUBBERS
ISO 2921:2011 Rubber, vulcanized Determination of low-temperature retraction (TR test)
NF ISO 4664-2 : 2006 RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF DYNAMIC PROPERTIES - PART 2: TORSION PENDULUM METHOD AT LOW FREQUENCIES
ISO 22762-1:2010 Elastomeric seismic-protection isolators Part 1: Test methods
ISO 36:2017 Rubber, vulcanized or thermoplastic Determination of adhesion to textile fabrics
ISO 18437-2:2005 Mechanical vibration and shock — Characterization of the dynamic mechanical properties of visco-elastic materials — Part 2: Resonance method
BS EN 13611:2015 Safety and control devices for burners and appliances burning gaseous and/or liquid fuels. General requirements
UNE-EN ISO 30013:2012 Rubber and plastics hoses - Methods of exposure to laboratory light sources - Determination of changes in colour, appearance and other physical properties (ISO 30013:2011)
NF ISO 7619-1 : 2010 RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF INDENTATION HARDNESS - PART 1: DUROMETER METHOD (SHORE HARDNESS)
ISO 27588:2012 Rubber, vulcanized or thermoplastic Determination of dead-load hardness using the very low rubber hardness (VLRH) scale
ISO 19013-1:2005 Rubber hoses and tubing for fuel circuits for internal combustion engines Specification Part 1: Diesel fuels
ISO 814:2017 Rubber, vulcanized or thermoplastic Determination of adhesion to metal Two-plate method
BIS IS 16209 : 2014 RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES - DETERMINATION OF RESISTANCE TO VACUUM
NF EN ISO 1402 : 2009 RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES - HYDROSTATIC TESTING
I.S. EN ISO 3821:2010 GAS WELDING EQUIPMENT - RUBBER HOSES FOR WELDING, CUTTING AND ALLIED PROCESSES
ISO 8307:2007 Flexible cellular polymeric materials Determination of resilience by ball rebound
AAMI ES60601-1 : 2005 : INC : AMD 1 : 2012 : R201200 MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE (IEC 60601-1:2005, MOD)
AAMI ES60601-1 : 2005 : INC : AMD 2 : 2012 : R201200 MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE (IEC 60601-1:2005, MOD)
UNE-EN 856:2015 Rubber hoses and hose assemblies - Rubber-covered spiral wire reinforced hydraulic type - Specification
AAMI ES60601-1 : 2005 : R2012 MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE (IEC 60601-1:2005, MOD)
ISO 6605:2017 Hydraulic fluid power — Test methods for hoses and hose assemblies
I.S. EN ISO 527-1:2012 PLASTICS - DETERMINATION OF TENSILE PROPERTIES - PART 1: GENERAL PRINCIPLES (ISO 527-1:2012)
BS EN 1844:2013 Flexible sheets for waterproofing. Determination of resistance to ozone. Plastic and rubber sheets for roof waterproofing
BS EN ISO 7233:2016 Rubber and plastics hoses and hose assemblies. Determination of resistance to vacuum
BS EN ISO 8033:2017 Rubber and plastics hoses. Determination of adhesion between components
UNE-EN ISO 8030:2015 Rubber and plastics hoses - Method of test for flammability (ISO 8030:2014)
UNE-EN 854:2015 Rubber hoses and hose assemblies - Textile reinforced hydraulic type - Specification
BS EN 857:2015 Rubber hoses and hose assemblies. Wire braid reinforced compact type for hydraulic applications. Specification
ISO 10619-3:2011 Rubber and plastics hoses and tubing Measurement of flexibility and stiffness Part 3: Bending tests at high and low temperatures
BS EN 14879-5:2007 Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media Linings on concrete components
I.S. EN 854:2015 RUBBER HOSES AND HOSE ASSEMBLIES - TEXTILE REINFORCED HYDRAULIC TYPE - SPECIFICATION
DIN EN ISO 6808:2000-11 PLASTICS HOSES AND HOSE ASSEMBLIES FOR SUCTION AND LOW-PRESSURE DISCHARGE OF PETROLEUM LIQUIDS - SPECIFICATION (ISO 6808:2014)
DIN EN ISO 7326:2017-03 RUBBER AND PLASTICS HOSES - ASSESSMENT OF OZONE RESISTANCE UNDER STATIC CONDITIONS (ISO 7326:2016)
EN ISO 20344:2011 Personal protective equipment - Test methods for footwear (ISO 20344:2011)
DIN EN ISO 4080:2010-05 Rubber and plastics hoses and hose assemblies - Determination of permeability to gas (ISO 4080:2009)
DIN EN ISO 8308:2016-02 RUBBER AND PLASTICS HOSES AND TUBING - DETERMINATION OF TRANSMISSION OF LIQUIDS THROUGH HOSE AND TUBING WALLS (ISO 8308:2015)
DIN EN 15889:2011-09 Fire-fighting hoses - Test methods
DIN EN ISO 178:2013-09 PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES (ISO 178:2010 + AMD.1:2013)
DIN EN 853:2016-09 Rubber hoses and hose assemblies - Wire braid reinforced hydraulic type - Specification
UNI ISO 2781 : 2011 RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF DENSITY
ASTM G 74 : 2013 : REDLINE Standard Test Method for Ignition Sensitivity of Nonmetallic Materials and Components by Gaseous Fluid Impact
11/30244908 DC : 0 BS EN ISO 3994 - PLASTICS HOSES - HELICAL-THERMOPLASTIC-REINFORCED THERMOPLASTICS HOSES FOR SUCTION AND DISCHARGE OF AQUEOUS MATERIALS - SPECIFICATION
11/30212455 DC : 0 BS ISO 3387 - RUBBER - DETERMINATION OF CRYSTALLIZATION EFFECTS BY HARDNESS MEASUREMENTS
11/30242926 DC : DRAFT MAY 2011 BS ISO 12000 - PLASTICS/RUBBER - POLYMER DISPERSIONS AND RUBBER LATICES (NATURAL AND SYNTHETIC) - DEFINITIONS AND REVIEW OF TEST METHODS
15/30317639 DC : 0 BS ISO 6804 - RUBBER AND PLASTICS INLET HOSES AND HOSE ASSEMBLIES FOR WASHING-MACHINES AND DISHWASHERS - SPECIFICATION
UNE-ISO 4664-1:2011 Rubber, vulcanised or thermoplastic. Determination of dynamic properties. Parte 1: General guidance
I.S. EN ISO 178:2010 PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES (ISO 178:2010)
UNE-ISO 37:2013 Rubber, vulcanised or thermoplastic. Determination of tensile stress-strain properties
14/30296041 DC : 0 BS ISO 23794 - RUBBER, VULCANIZED OR THERMOPLASTIC - ABRASION TESTING - GUIDANCE
07/30162647 DC : 0 BS ISO 7743 - RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF COMPRESSION STRESS-STRAIN PROPERTIES
PD ISO/TS 16096:2014 Reclaimed isobutene-isoprene (IIR) rubber. Evaluation procedure
EN IEC 61730-2:2018/AC:2018-06 PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 2: REQUIREMENTS FOR TESTING (IEC 61730-2:2016)
DIN ISO 815-2:2016-09 Rubber, vulcanized or thermoplastic - Determination of compression set - Part 2: At low temperatures (ISO 815-2:2014)
09/30196780 DC : DRAFT JAN 2009 BS ISO 12493 - RUBBER, VULCANIZED - DETERMINATION OF STRESS IN TENSION ON HEATING
16/30334939 DC : 0 BS ISO 4666-3 - RUBBER, VULCANIZED - DETERMINATION OF TEMPERATURE RISE AND RESISTANCE TO FATIGUE IN FLEXOMETER TESTING - PART 3: COMPRESSION FLEXOMETER (CONSTANT-STRAIN TYPE)
BS ISO 4665:2016 Rubber, vulcanized or thermoplastic. Resistance to weathering
16/30334942 DC : 0 BS ISO 23337 - RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF ABRASION RESISTANCE USING THE IMPROVED LAMBOURN TEST MACHINE
10/30212482 DC : 0 BS ISO 4658 - ACRYLONITRILE-BUTADIENE RUBBER (NBR) - EVALUATION PROCEDURE
I.S. EN 13611:2015 SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
BS ISO 4642-1:2015 Rubber and plastics hoses, non-collapsible, for fire-fighting service Semi-rigid hoses for fixed systems
11/30212461 DC : 0 BS ISO 1432 - RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF LOW TEMPERATURE STIFFENING (GEHMAN TEST)
PREN 681-1 : DRAFT 2016 ELASTOMERIC SEALS - MATERIAL REQUIREMENTS FOR PIPE JOINT SEALS USED IN WATER AND DRAINAGE APPLICATIONS - PART 1: VULCANIZED RUBBER
05/30129278 DC : DRAFT FEB 2005 ISO/DIS 8029-2 - PLASTICS HOSE - GENERAL PURPOSE COLLAPSIBLE WATER HOSE, TEXTILE-REINFORCED - SPECIFICATION
14/30255646 DC : 0 BS ISO 4097 - RUBBER, ETHYLENE-PROPYLENE-DIENE (EPDM) - EVALUATION PROCEDURE
BS ISO 2930:2017 Rubber, raw natural. Determination of plasticity retention index (PRI)
14/30304385 DC : 0 BS ISO 34-2 - RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF TEAR STRENGTH - PART 2: SMALL (DELFT) TEST PIECES
BS ISO 3384-2:2012 Rubber, vulcanized or thermoplastic. Determination of stress relaxation in compression Testing with temperature cycling
16/30334038 DC : 0 BS EN ISO 1856 - FLEXIBLE CELLULAR POLYMERIC MATERIALS - DETERMINATION OF COMPRESSION SET
BS ISO 6943:2017 Rubber, vulcanized. Determination of tension fatigue
ISO 4658:1999 Acrylonitrile-butadiene rubber (NBR) Evaluation procedure
BS ISO 5772:2015 Rubber and plastic hoses and hose assemblies for measured fuel dispensing systems. Specification
06/30156380 DC : DRAFT SEP 2006 BS ISO 1795 - RUBBER, RAW NATURAL AND RAW SYNTHETIC - SAMPLING AND FURTHER PREPARATIVE PROCEDURES
15/30289114 DC : 0 BS ISO 2782-1 - RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF PERMEABILITY TO GASES - PART 1: DIFFERENTIAL-PRESSURE METHODS
BS ISO 6914:2013 Rubber, vulcanized or thermoplastic. Determination of ageing characteristics by measurement of stress relaxation in tension
ISO 4664-1:2011 Rubber, vulcanized or thermoplastic — Determination of dynamic properties — Part 1: General guidance
BS ISO 6123-1:2015 Rubber or plastics covered rollers. Specifications Requirements for hardness
09/30193376 DC : 0 BS ISO 34-1 - RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF TEAR STRENGTH - PART 1: TROUSER, ANGLE AND CRESCENT TEST PIECES
BS ISO 7619-1:2010 Rubber, vulcanized or thermoplastic. Determination of indentation hardness Durometer method (Shore hardness)
UNI ISO 2285 : 2013 RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF TENSION SET UNDER CONSTANT ELONGATION, AND OF TENSION SET, ELONGATION AND CREEP UNDER CONSTANT TENSILE LOAD
15/30317687 DC : 0 BS EN ISO 8033 - RUBBER AND PLASTICS HOSES - DETERMINATION OF ADHESION BETWEEN COMPONENTS
I.S. EN ISO 7326:2016 RUBBER AND PLASTICS HOSES - ASSESSMENT OF OZONE RESISTANCE UNDER STATIC CONDITIONS
NF EN ISO 3821 : 2010 GAS WELDING EQUIPMENT - RUBBER HOSES FOR WELDING, CUTTING AND ALLIED PROCESSES
NF ISO 4664-1 : 2012 RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF DYNAMIC PROPERTIES - PART 1: GENERAL GUIDANCE
UNI ISO 17052 : 2014 RUBBER, RAW - DETERMINATION OF RESIDUAL MONOMERS AND OTHER VOLATILE LOW-MOLECULAR-MASS COMPOUNDS BY CAPILLARY GAS CHROMATOGRAPHY - THERMAL DESORPTION (DYNAMIC HEADSPACE) METHOD
17/30334041 DC : 0 BS EN ISO 8307 - FLEXIBLE CELLULAR POLYMERIC MATERIALS - DETERMINATION OF RESILIENCE BY BALL REBOUND
UNE-ISO 3384-1:2017 Rubber, vulcanize or thermoplastic. Determination of stress relaxation in compression. Part 1: Testing at constant temperature
BS ISO 7267-2:2008 Rubber-covered rollers. Determination of apparent hardness Shore-type durometer method
BS ISO 2782:2006 Rubber, vulcanized or thermoplastic. Determination of permeability to gases
13/30281501 DC : 0 BS EN 455-2 - MEDICAL GLOVES FOR SINGLE USE - PART 2: REQUIREMENTS AND TESTING FOR PHYSICAL PROPERTIES
BS ISO 4097:2014 Rubber, ethylene-propylene-diene (EPDM). Evaluation procedure
07/30090853 DC : 0 BS ISO 1658 - NATURAL RUBBER (NR) - EVALUATION PROCEDURE
DIN EN ISO 16012 E : 2016 PLASTICS - DETERMINATION OF LINEAR DIMENSIONS OF TEST SPECIMENS (ISO 16012:2015)
06/30147247 DC : DRAFT MAR 2006 ISO 7267-3 - RUBBER-COVERED ROLLERS - DETERMINATION OF APPARENT HARDNESS - PART 3: PUSEY AND JONES METHOD
11/30212449 DC : 0 BS ISO 1431-1 - RUBBER, VULCANIZED OR THERMOPLASTIC - RESISTANCE TO OZONE CRACKING - PART 1: STATIC AND DYNAMIC STRAIN TESTING
11/30247603 DC : 0 BS ISO 2782-2 - RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF PERMEABILITY TO GASES - PART 2: EQUAL-PRESSURE METHOD
13/30278483 DC : 0 BS ISO 11346 - RUBBER, VULCANIZED OR THERMOPLASTIC - ESTIMATION OF LIFE-TIME AND MAXIMUM TEMPERATURE OF USE
15/30317678 DC : 0 BS EN ISO 7233 - RUBBER AND PLASTIC HOSES AND HOSE ASSEMBLIES - GUIDELINES FOR SELECTION,STORAGE,USE AND MAINTENANCE
BS ISO 37:2017 Rubber, vulcanized or thermoplastic. Determination of tensile stress-strain properties
05/30133100 DC : DRAFT MAY 2005 ISO 812 - RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF LOW TEMPERATURE BRITTLENESS
14/30301115 DC : 0 BS EN 3207 - AEROSPACE SERIES - RUBBER COMPOUNDS - TECHNICAL SPECIFICATION
BS ISO 9563:2015 Belt drives. Electrical conductivity of antistatic endless synchronous belts. Characteristics and test method
10/30167702 DC : 0 BS ISO 4635 - RUBBER, VULCANIZED - PREFORMED JOINT SEALS FOR USE BETWEEN CONCRETE HIGHWAY PAVING SECTIONS - SPECIFICATION
UNE-ISO 3387:2013 Rubber. Determination of crystallization effects by hardness measurements.
BS ISO 7663:2014 Halogenated isobutene-isoprene rubber (BIIR and CIIR). Evaluation procedures
BIS IS 3400-1 : 2012 METHODS OF TEST FOR VULCANIZED RUBBER - PART 1: DETERMINATION OF TENSILE STRESS-STRAIN PROPERTIES
BS ISO 2476:2014 Butadiene rubber (BR). Solution-polymerized types. Evaluation procedures
10/30212479 DC : 0 BS ISO 2475 - CHLOROPRENE RUBBER (CR) - GENERAL-PURPOSE TYPES - EVALUATION PROCEDURE
PREN 549 : DRAFT 2017 RUBBER MATERIALS FOR SEALS AND DIAPHRAGMS FOR GAS APPLIANCES AND GAS EQUIPMENT
ISO 22762-2:2010 Elastomeric seismic-protection isolators Part 2: Applications for bridges Specifications
12/30261825 DC : 0 BS ISO 815-1 - RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF COMPRESSION SET - PART 1: AT AMBIENT OR ELEVATED TEMPERATURES
08/30155570 DC : DRAFT APR 2008 BS ISO 7231 - POLYMERIC MATERIALS, CELLULAR, FLEXIBLE DETERMINATION OF AIR FLOW VALUE AT CONSTANT PRESSURE-DROP
16/30341349 DC : 0 BS EN 2899 - AEROSPACE SERIES - VULCANIZED RUBBERS - TEST ON THE SUSCEPTIBILITY TO CORROSION IN A DAMP ATMOSPHERE OF METALS IN CONTACT WITH VULCANIZED RUBBERS
06/30140687 DC : DRAFT MAY 2006 ISO 815-2 - RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF COMPRESSION SET - PART 2: LOW TEMPERATURES
06/30153862 DC : DRAFT JULY 2006 BS ISO 8031 - RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES - DETERMINATION OF ELECTRICAL PROPERTIES
BS ISO 815-1:2014 Rubber, vulcanized or thermoplastic. Determination of compression set At ambient or elevated temperatures
ISO 2302:2014 Isobutene-isoprene rubber (IIR) Evaluation procedure
09/30193388 DC : DRAFT MAR 2009 BS ISO 4666-1 - RUBBER, VULCANIZED - DETERMINATION OF TEMPERATURE RISE AND RESISTANCE TO FATIGUE IN FLEXOMETER TESTING - PART 1: BASIC PRINCIPLES
DIN EN 15807:2011-05 Railway applications - Pneumatic half couplings
UNE-ISO 13226:2017 Rubber. Standard reference elastomers (SREs) for characterizing the effect of liquids on vulcanized rubbers.
ISO 4081:2016 Rubber hoses and tubing for cooling systems for internal-combustion engines Specification
ISO 8028:2017 Rubber and/or plastics hoses and hose assemblies for airless paint spraying — Specification
ISO 3384-1:2011 Rubber, vulcanized or thermoplastic Determination of stress relaxation in compression Part 1: Testing at constant temperature
ISO 4195:2012 Conveyor belts with heat-resistant rubber covers — Heat resistance of covers — Requirements and test methods
ISO 4662:2017 Rubber, vulcanized or thermoplastic Determination of rebound resilience
UNE-ISO 815-2:2011 Rubber, vulcanized or thermoplastic -- Determination of compression set -- Part 2: At low temperatures
BS ISO 3384-1 : 2011 RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF STRESS RELAXATIONIN COMPRESSION - PART 1: TESTING AT CONSTANT TEMPERATURE
BS ISO 8013:2012 Rubber, vulcanized. Determination of creep in compression or shear
I.S. EN ISO 10619-3:2011 RUBBER AND PLASTICS HOSES AND TUBING - MEASUREMENT OF FLEXIBILITY AND STIFFNESS - PART 3: BENDING TESTS AT HIGH AND LOW TEMPERATURES (ISO 10619-3:2011)
UNE-EN ISO 7326:2017 Rubber and plastics hoses - Assessment of ozone resistance under static conditions (ISO 7326:2016)
UNE-ISO 812:2012 Rubber, vulcanized or thermoplastic --Determination of low-temperature brittleness
PREN 455-2 : DRAFT 2013 MEDICAL GLOVES FOR SINGLE USE - PART 2: REQUIREMENTS AND TESTING FOR PHYSICAL PROPERTIES
I.S. EN ISO 16012:2015 PLASTICS - DETERMINATION OF LINEAR DIMENSIONS OF TEST SPECIMENS
BS ISO 18437-3 : 2005 MECHANICAL VIBRATION AND SHOCK - CHARACTERIZATION OF THE DYNAMIC MECHANICAL PROPERTIES OF VISCO-ELASTIC MATERIALS - PART 3: CANTILEVER SHEAR BEAM METHOD
BS ISO 18437-2 : 2005 MECHANICAL VIBRATION AND SHOCK - CHARACTERIZATION OF THE DYNAMIC MECHANICAL PROPERTIES OF VISCO-ELASTIC MATERIALS - PART 2: RESONANCE METHOD
EN ISO 8028:2018 Rubber and/or plastics hoses and hose assemblies for airless paint spraying - Specification (ISO 8028:2017)
DIN EN ISO 10619-2:2012-03 RUBBER AND PLASTICS HOSES AND TUBING - MEASUREMENT OF FLEXIBILITY AND STIFFNESS - PART 2: BENDING TESTS AT SUB-AMBIENT TEMPERATURES (ISO 10619-2:2011)
ISO 6804:2016 Rubber and plastics inlet hoses and hose assemblies for washing-machines and dishwashers — Specification
ISO 6914:2013 Rubber, vulcanized or thermoplastic Determination of ageing characteristics by measurement of stress relaxation in tension
ISO 4097:2014 Rubber, ethylene-propylene-diene (EPDM) Evaluation procedure
ISO 4664-2:2006 Rubber, vulcanized or thermoplastic — Determination of dynamic properties — Part 2: Torsion pendulum methods at low frequencies
EN 13832-1:2006 Footwear protecting against chemicals - Part 1: Terminology and test methods
ISO 2476:2014 Butadiene rubber (BR) — Solution-polymerized types — Evaluation procedures
ISO 24454:2008 Rubber Acquisition and presentation of comparable multi-point data
ISO 815-1:2014 Rubber, vulcanized or thermoplastic Determination of compression set Part 1: At ambient or elevated temperatures
NF EN 15807 : 2011 RAILWAY APPLICATIONS - PNEUMATIC HALF COUPLINGS
UNE-ISO 289-1:2018 Rubber, unvulcanized. Determinations using a shearing-disc viscometer. Part 1: Determination of Mooney viscosity
I.S. EN ISO 10619-2:2018 RUBBER AND PLASTICS HOSES AND TUBING - MEASUREMENT OF FLEXIBILITY AND STIFFNESS - PART 2: BENDING TESTS AT SUB-AMBIENT TEMPERATURES (ISO 10619-2:2017)
17/30360051 DC : 0 BS EN 13611 - SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
ISO 24453:2008 Rubber Acquisition and presentation of comparable single-point data
BS ISO 2285:2013 Rubber, vulcanized or thermoplastic. Determination of tension set underconstant elongation, and of tension set, elongation and creep underconstant tensile load
UNI ISO 4664-2 : 2009 RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF DYNAMIC PROPERTIES - PART 2: TORSION PENDULUM METHODS AT LOW FREQUENCIES
BS ISO 2921:2011 Rubber, vulcanized. Determination of low-temperature retraction (TR test)
ISO 12493:2017 Rubber, vulcanized — Determination of stress in tension upon heating
IEC 61730-2:2016 Photovoltaic (PV) module safety qualification - Part 2: Requirements for testing
ISO 289-1:2015 Rubber, unvulcanized Determinations using a shearing-disc viscometer Part 1: Determination of Mooney viscosity
ISO 6943:2017 Rubber, vulcanized Determination of tension fatigue
ISO 27727:2008 Rubber, vulcanized Measurement of fatigue crack growth rate
ISO 23233:2016 Rubber, vulcanized or thermoplastic Determination of resistance to abrasion using a driven, vertical abrasive disc
ISO 527-1:2012 Plastics Determination of tensile properties Part 1: General principles
AAMI ES60601-1 : 2005 MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE (IEC 60601-1:2005, MOD)
I.S. EN 856:2015 RUBBER HOSES AND HOSE ASSEMBLIES - RUBBER-COVERED SPIRAL WIRE REINFORCED HYDRAULIC TYPE - SPECIFICATION
DIN EN ISO 7233:2015-10 (Draft) RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES - DETERMINATION OF RESISTANCE TO VACUUM (ISO 7233:2016)
DIN EN 14879-5 E : 2007 ORGANIC COATING SYSTEMS AND LININGS FOR PROTECTION OF INDUSTRIAL APPARATUS AND PLANTS AGAINST CORROSION CAUSED BY AGGRESSIVE MEDIA - PART 5: LININGS ON CONCRETE COMPONENTS
DIN EN ISO 1402:2010-04 Rubber and plastics hoses and hose assemblies - Hydrostatic testing (ISO 1402:2009)
UNE-EN ISO 3994:2014 Plastics hoses - Helical-thermoplastic-reinforced thermoplastics hoses for suction and discharge of aqueous materials - Specification (ISO 3994:2014)
BS EN ISO 20344:2011 Personal protective equipment. Test methods for footwear
UNE-EN ISO 20344:2012 Personal protective equipment - Test methods for footwear (ISO 20344:2011)
UNE-EN ISO 8033:2017 Rubber and plastics hoses - Determination of adhesion between components (ISO 8033:2016)
BS EN ISO 8030:2014 Rubber and plastics hoses. Method of test for flammability
BS EN ISO 8031:2009 Rubber and plastics hoses and hose assemblies. Determination of electrical resistance and conductivity
I.S. EN ISO 2439:2009 FLEXIBLE CELLULAR POLYMERIC MATERIALS - DETERMINATION OF HARDNESS (INDENTATION TECHNIQUE)
I.S. EN ISO 8030:2014 RUBBER AND PLASTICS HOSES - METHOD OF TEST FOR FLAMMABILITY (ISO 8030:2014)
I.S. EN ISO 6179:2017 RUBBER, VULCANIZED OR THERMOPLASTIC - RUBBER SHEETS AND RUBBER-COATED FABRICS - DETERMINATION OF TRANSMISSION RATE OF VOLATILE LIQUIDS (GRAVIMETRIC TECHNIQUE) (ISO 6179:2017)
EN 15807:2011 Railway applications - Pneumatic half couplings
I.S. EN ISO 20344:2011 PERSONAL PROTECTIVE EQUIPMENT - TEST METHODS FOR FOOTWEAR (ISO 20344:2011)
DIN EN ISO 8030:2014-11 RUBBER AND PLASTICS HOSES - METHOD OF TEST FOR FLAMMABILITY (ISO 8030:2014)
I.S. EN ISO 1401:2016 RUBBER HOSES FOR AGRICULTURAL SPRAYING (ISO 1401:2016)
I.S. EN 1844:2013 FLEXIBLE SHEETS FOR WATERPROOFING - DETERMINATION OF RESISTANCE TO OZONE - PLASTIC AND RUBBER SHEETS FOR ROOF WATERPROOFING
DIN EN 13611:2019-06 Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - General requirements
I.S. EN ISO 5999:2013 FLEXIBLE CELLULAR POLYMERIC MATERIALS - POLYURETHANE FOAM FOR LOAD-BEARING APPLICATIONS EXCLUDING CARPET UNDERLAY - SPECIFICATION (ISO 5999:2013)
DIN EN ISO 3821:2010-07 GAS WELDING EQUIPMENT - RUBBER HOSES FOR WELDING, CUTTING AND ALLIED PROCESSES
I.S. EN ISO 14113:2013 GAS WELDING EQUIPMENT - RUBBER AND PLASTICS HOSE AND HOSE ASSEMBLIES FOR USE WITH INDUSTRIAL GASES UP TO 450 BAR (45 MPA) (ISO 14113:2013)
I.S. EN ISO 3994:2014 PLASTICS HOSES - HELICAL-THERMOPLASTIC-REINFORCED THERMOPLASTICS HOSES FOR SUCTION AND DISCHARGE OF AQUEOUS MATERIALS - SPECIFICATION (ISO 3994:2014)
I.S. EN ISO 8308:2015 RUBBER AND PLASTICS HOSES AND TUBING - DETERMINATION OF TRANSMISSION OF LIQUIDS THROUGH HOSE AND TUBING WALLS (ISO 8308:2015)
DIN EN ISO 8031:2010-04 RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES - DETERMINATION OF ELECTRICAL RESISTANCE AND CONDUCTIVITY
I.S. EN ISO 7233:2016 RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES - DETERMINATION OF RESISTANCE TO VACUUM (ISO 7233:2016)
I.S. EN 853:2015 RUBBER HOSES AND HOSE ASSEMBLIES - WIRE BRAID REINFORCED HYDRAULIC TYPE - SPECIFICATION
DIN EN 13832-1:2006-11 FOOTWEAR PROTECTING AGAINST CHEMICALS - PART 1: TERMINOLOGY AND TEST METHODS
DIN 53504:2009-10 TESTING OF RUBBER - DETERMINATION OF TENSILE STRENGTH AT BREAK, TENSILE STRESS AT YIELD, ELONGATION AT BREAK AND STRESS VALUES IN A TENSILE TEST
I.S. EN ISO 6808:2014 PLASTICS HOSES AND HOSE ASSEMBLIES FOR SUCTION AND LOW-PRESSURE DISCHARGE OF PETROLEUM LIQUIDS - SPECIFICATION (ISO 6808:2014)
I.S. EN 857:2015 RUBBER HOSES AND HOSE ASSEMBLIES - WIRE BRAID REINFORCED COMPACT TYPE FOR HYDRAULIC APPLICATIONS - SPECIFICATION
I.S. EN ISO 1402:2009 RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES - HYDROSTATIC TESTING
I.S. EN ISO 8033:2017 RUBBER AND PLASTICS HOSES - DETERMINATION OF ADHESION BETWEEN COMPONENTS (ISO 8033:2016)
I.S. EN ISO 1798:2008 FLEXIBLE CELLULAR POLYMERIC MATERIALS - DETERMINATION OF TENSILE STRENGTH AND ELONGATION AT BREAK
DIN EN 1844:2013-08 Flexible sheets for waterproofing - Determination of resistance to ozone - Plastic and rubber sheets for roof waterproofing
UNI EN ISO 5999 : 2013 FLEXIBLE CELLULAR POLYMERIC MATERIALS - POLYURETHANE FOAM FOR LOAD-BEARING APPLICATIONS EXCLUDING CARPET UNDERLAY - SPECIFICATION
OVE/ONORM EN 60601-1 : 2014 MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE (IEC 60601-1:2005 + COR.:2006 + COR.:2007 + A1:2012)
16/30335293 DC : 0 BS EN ISO 6179 - RUBBER, VULCANIZED OR THERMOPLASTIC - RUBBER SHEETS AND RUBBER-COATED FABRICS - DETERMINATION OF TRANSMISSION RATE OF VOLATILE LIQUIDS (GRAVIMETRIC TECHNIQUE)
BS EN 15807:2011 Railway applications. Pneumatic half couplings
NF EN ISO 10619-3 : 2012 RUBBER AND PLASTICS HOSES AND TUBING - MEASUREMENT OF FLEXIBILITY AND STIFFNESS - PART 3: BENDING TESTS AT HIGH AND LOW TEMPERATURES
NF ISO 4666-1 : 2010 RUBBER, VULCANIZED - DETERMINATION OF TEMPERATURE RISE AND RESISTANCE TO FATIGUE IN FLEXOMETER TESTING - PART 1: BASIC PRINCIPLES
UNI ISO 7619-2 : 2011 RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF INDENTATION HARDNESS - PART 2: IRHD POCKET METER METHOD
06/30150431 DC : DRAFT MAY 2006 ISO 4097 - RUBBER, ETHYLENE-PROPYLENE-DIENE (EPDM) - EVALUATION PROCEDURE
BS ISO 3387:2012 Rubber. Determination of crystallization effects by hardness measurements
14/30295535 DC : 0 BS ISO 5794-2 - RUBBER COMPOUNDING INGREDIENTS - SILICA, PRECIPITATED, HYDRATED - PART 2: EVALUATION PROCEDURES IN STYRENE-BUTADIENE RUBBER
BS ISO 4195:2012 Conveyor belts with heat-resistant rubber covers. Heat resistance of covers. Requirements and test methods
BS EN ISO 8029:2014 Plastics hose. General-purpose collapsible water hose, textile-reinforced. Specification
17/30355054 DC : 0 BS ISO 1853 - CONDUCTING AND DISSIPATIVE RUBBERS, VULCANIZED OR THERMOPLASTIC - MEASUREMENT OF RESISTIVITY
BS ISO 2322:2014 Styrene-butadiene rubber (SBR). Emulsion- and solution-polymerized types. Evaluation procedures
PD ISO/TS 16097:2013 Vulcanized crumb rubber. Evaluation procedures
09/30182064 DC : 0 BS ISO 22762-2 - ELASTOMERIC SEISMIC-PROTECTION ISOLATORS - PART 2: APPLICATIONS FOR BRIDGES - SPECIFICATIONS
ISO 1853:2011 Conducting and dissipative rubbers, vulcanized or thermoplastic Measurement of resistivity
NF ISO 37 : 2018 RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF TENSILE STRESS-STRAIN PROPERTIES
07/30169250 DC : 0 BS EN 421 - PROTECTIVE GLOVES AGAINST IONIZING RADIATION AND RADIOACTIVE CONTAMINATION
UNI EN 15807 : 2011 RAILWAY APPLICATIONS - PNEUMATIC HALF COUPLINGS
14/30304382 DC : 0 BS ISO 34-1 - RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF TEAR STRENGTH - PART 1: TROUSER, ANGLE AND CRESCENT TEST PIECES
BS ISO 6605:2017 Hydraulic fluid power. Test methods for hoses and hose assemblies
UNE-ISO 34-2:2011 Rubber, vulcanized or thermoplastic -- Determination of tear strength -- Part 2: Small (Delft) test pieces
UNE-ISO 1795:2013 Rubber, raw natural and raw synthetic — Sampling and further preparative procedures
11/30244915 DC : 0 BS EN ISO 8029 - PLASTICS HOSE - GENERAL-PURPOSE COLLAPSIBLE WATER HOSE, TEXTILE-REINFORCED - SPECIFICATION
BIS IS 3400-9 : 2014 METHODS OF TEST FOR VULCANIZED RUBBER - PART 9: RUBBER, VULCANIZED OR THERMOPLASTIC DETERMINATION OF DENSITY
16/30318232 DC : 0 BS ISO 4662 - RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF REBOUND RESILIENCE
11/30212467 DC : 0 BS ISO 8013 - RUBBER, VULCANIZED - DETERMINATION OF CREEP IN COMPRESSION OR SHEAR
DIN ISO 48:2016-09 Rubber, vulcanized or thermoplastic - Determination of hardness (hardness between 10 IRHD and 100 IRHD) (ISO 48:2010)
BS ISO 6505:2015 Rubber, vulcanized or thermoplastic. Determination of tendency to adhere to and corrode metals
UNI ISO 1432 : 2013 RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF LOW-TEMPERATURE STIFFENING (GEHMAN TEST)
DIN ISO 812:2015-06 Rubber, vulcanized or thermoplastic - Determination of low-temperature brittleness (ISO 812:2011)
BS ISO 2321:2017 Rubber threads. Methods of test
DIN ISO 1827:2010-07 RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF SHEAR MODULUS AND ADHESION TO RIGID PLATES - QUADRUPLE-SHEAR METHODS
14/30296011 DC : 0 BS ISO 6505 - RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF TENDENCY TO ADHERE TO AND CORRODE METALS
14/30295541 DC : 0 BS ISO 4659 - STYRENE-BUTADIENE RUBBER (CARBON BLACK OR CARBON BLACK AND OIL MASTERBATCHES) - EVALUATION PROCEDURE
DIN ISO 2285:2013-12 Rubber, vulcanized or thermoplastic - Determination of tension set under constant elongation, and of tension set, elongation and creep under constant tensile load (ISO 2285:2013)
14/30293931 DC : 0 BS ISO 19013-2 - RUBBER HOSES AND TUBING FOR FUEL CIRCUITS FOR INTERNAL COMBUSTION ENGINES - SPECIFICATION - PART 2: GASOLINE FUELS
BS ISO 20057:2017 Rubber household gloves. General requirements and test methods
UNE-EN 15889:2013 Fire-fighting hoses - Test methods
EN ISO 7233:2016 Rubber and plastics hoses and hose assemblies - Determination of resistance to vacuum (ISO 7233:2016)
DIN EN ISO 30013:2012-03 Rubber and plastics hoses - Methods of exposure to laboratory light sources - Determination of changes in colour, appearance and other physical properties (ISO 30013:2011)
09/30193379 DC : DRAFT FEB 2009 BS ISO 813 - RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF ADHESION TO A RIGID SUBSTRATE - 90 DEGREES PEEL METHOD
UNE-ISO 2393:2013 Rubber test mixes — Preparation, mixing and vulcanization — Equipment and procedures
DIN ISO 4649 E : 2014 RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF ABRASION RESISTANCE USING A ROTATING CYLINDRICAL DRUM DEVICE (ISO 4649:2010)
BS ISO 1795:2017 Rubber, raw natural and raw synthetic. Sampling and further preparative procedures
BS ISO 19013-1:2005 Rubber hoses and tubing for fuel circuits for internal combustionengines . Specification Diesel fuels
ISO 2322:2014 Styrene-butadiene rubber (SBR) — Emulsion- and solution-polymerized types — Evaluation procedures
BS ISO 7743:2017 Rubber, vulcanized or thermoplastic. Determination of compression stress-strain properties
ISO 34-2:2015 Rubber, vulcanized or thermoplastic Determination of tear strength Part 2: Small (Delft) test pieces
UNE-EN ISO 16012:2016 Plastics - Determination of linear dimensions of test specimens (ISO 16012:2015)
UNI EN ISO 3821 : 2010 GAS WELDING EQUIPMENT - RUBBER HOSES FOR WELDING, CUTTING AND ALLIED PROCESSES
BS ISO 11346:2014 Rubber, vulcanized or thermoplastic. Estimation of life-time and maximum temperature of use
06/30130353 DC : DRAFT MAY 2006 ISO 6943 - RUBBER, VULCANIZED - DETERMINATION OF TENSION FATIGUE
BIS IS 12656 : 2014 RUBBER OR PLASTICS HOSES AND TUBING - BENDING TESTS
BIS IS 3400-4 : 2012 METHODS OF TEST FOR VULCANIZED RUBBER - PART 4: ACCELERATED AGEING AND HEAT RESISTANCE
ISO 7267-1:2017 Rubber-covered rollers Determination of apparent hardness Part 1: IRHD method
BS ISO 23337:2016 Rubber, vulcanized or thermoplastic. Determination of abrasion resistance using the Improved Lambourn test machine
14/30295544 DC : 0 BS ISO 7663 - HALOGENATED ISOBUTENE-ISOPRENE RUBBER (BIIR AND CIIR) - EVALUATION PROCEDURES
BS ISO 28702:2008 Rubber and plastics hoses and tubing. Textile reinforced types. Sub-ambient temperature crush test
09/30193685 DC : 0 BS ISO 4081 - RUBBER HOSES AND TUBING FOR COOLING SYSTEMS FOR INTERNAL-COMBUSTION ENGINES - SPECIFICATION
BS ISO 6916-1:1995 Flexible cellular polymeric materials. Sponge and expanded cellular rubber products. Specification Sheeting
BS EN 15889:2011 Fire-fighting hoses. Test methods
DIN EN ISO 8029:2014-12 PLASTICS HOSE - GENERAL-PURPOSE COLLAPSIBLE WATER HOSE, TEXTILE-REINFORCED - SPECIFICATION (ISO 8029:2014)
17/30355087 DC : 0 BS ISO 13226 - RUBBER - STANDARD REFERENCE ELASTOMERS (SRES) FOR CHARACTERIZING THE EFFECT OF LIQUIDS ON VULCANIZED RUBBERS
BS ISO 4642-2:2015 Rubber and plastics hoses, non-collapsible, for fire-fighting service Semi-rigid hoses (and hose assemblies) for pumps and vehicles
08/30176630 DC : DRAFT JAN 2008 BS ISO 2322 - STYRENE-BUTADIENE RUBBER (SBR) - EMULSION AND SOLUTION POLYMERIZED TYPES - EVALUATION PROCEDURES
PREN 13832-1 : DRAFT 2017 FOOTWEAR PROTECTING AGAINST CHEMICALS - PART 1: TERMINOLOGY AND TEST METHODS
BS ISO 15113:2005 Rubber. Determination of frictional properties
07/30161675 DC : 0 BS ISO 24454 - PHYSICAL TESTING OF RUBBER - ACQUISITION AND PRESENTATION OF COMPARABLE MULTI-POINT DATA
BS EN ISO 8307:1998 Flexible cellular polymeric materials. Determination of resilience
BS ISO 7267-1:2017 Rubber-covered rollers. Determination of apparent hardness IRHD method
06/30133205 DC : DRAFT APR 2006 EN ISO 8307 - FLEXIBLE CELLULAR POLYMERIC MATERIALS - DETERMINATION OF RESILIENCE BY BALL REBOUND
BS ISO 815-2:2014 Rubber, vulcanized or thermoplastic. Determination of compression set At low temperatures
SAE J 2979 : 2012 TEST METHOD FOR VULCANIZED RUBBER AND THERMOPLASTIC ELASTOMER DETERMINATION OF COMPRESSIVE STRESS RELAXATION (CSR) RESPONSE
DIN ISO 34-1:2016-09 RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF TEAR STRENGTH - PART 1: TROUSER, ANGLE AND CRESCENT TEST PIECES (ISO 34-1:2015)
UNE-EN 15807:2011 Railway applications - Pneumatic half couplings
UNE-ISO 2921:2017 Rubber, vulcanized. Determination of low temperature retraction (TR test)
ISO 11346:2014 Rubber, vulcanized or thermoplastic — Estimation of life-time and maximum temperature of use
NF ISO 48 : 2010 RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF HARDNESS (HARDNESS BETWEEN 10 IRHD AND 100 IRHD)
ISO 13226:2011 Rubber Standard reference elastomers (SREs) for characterizing the effect of liquids on vulcanized rubbers
I.S. EN ISO 30013:2011 RUBBER AND PLASTICS HOSES - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - DETERMINATION OF CHANGES IN COLOUR, APPEARANCE AND OTHER PHYSICAL PROPERTIES (ISO 30013:2011)
ISO 815-2:2014 Rubber, vulcanized or thermoplastic Determination of compression set Part 2: At low temperatures
ISO 24999:2008 Flexible cellular polymeric materials Determination of fatigue by a constant-strain procedure
I.S. EN 60601- 1:2006&A1:2013&AC:2014&A12:2014 MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE
UNI ISO 7619-1 : 2011 RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF INDENTATION HARDNESS - PART 1: DUROMETER METHOD (SHORE HARDNESS)
ISO 2782-2:2012 Rubber, vulcanized or thermoplastic Determination of permeability to gases Part 2: Equal-pressure method
BS ISO 2303:2011 Isoprene rubber (IR). Non-oil-extended, solution-polymerized types Evaluation procedures
ISO 11752:2000 Flexible cellular polymeric materials — Moulded and extruded sponge or expanded cellular rubber products — Compressibility test on finished parts
UNI ISO 2303 : 2012 ISOPRENE RUBBER (IR) - NON-OIL-EXTENDED, SOLUTION-POLYMERIZED TYPES - EVALUATION PROCEDURES
UNI EN ISO 178 : 2013 PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES
ISO 6123-1:2015 Rubber or plastics covered rollers — Specifications — Part 1: Requirements for hardness
UNI EN ISO 8029 : 2014 PLASTICS HOSE - GENERAL-PURPOSE COLLAPSIBLE WATER HOSE, TEXTILE-REINFORCED - SPECIFICATION
UNI ISO 3384-1 : 2013 RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF STRESS RELAXATION IN COMPRESSION - PART 1: TESTING AT CONSTANT TEMPERATURE
PD IEC/TR 60601-4-3:2015 Medical electrical equipment Guidance and interpretation. Considerations of unaddressed safety aspects in the third edition of IEC 60601-1 and proposals for new requirements
BS ISO 813:2016 Rubber, vulcanized or thermoplastic. Determination of adhesion to a rigid substrate. 90° peel method
EN 16523-1:2015 Determination of material resistance to permeation by chemicals - Part 1: Permeation by liquid chemical under conditions of continuous contact
NF ISO 2475 : 2011 CHLOROPRENE RUBBER (CR) - GENERAL-PURPOSE TYPES - EVALUATION PROCEDURE
UNI ISO 7743 : 2012 RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF COMPRESSION STRESS-STRAIN PROPERTIES
EN ISO 10619-2:2018 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 2: Bending tests at sub-ambient temperatures (ISO 10619-2:2017)
ISO 3384-2:2012 Rubber, vulcanized or thermoplastic Determination of stress relaxation in compression Part 2: Testing with temperature cycling
ISO 22768:2017 Rubber, raw Determination of the glass transition temperature by differential scanning calorimetry (DSC)
ISO 10282:2014 Single-use sterile rubber surgical gloves — Specification
EN ISO 8307:2007 Flexible cellular polymeric materials - Determination of resilience by ball rebound (ISO 8307:2007)
ISO 7267-3:2017 Rubber-covered rollers Determination of apparent hardness Part 3: Pusey and Jones method
EN 2899:2018 Aerospace series - Vulcanized rubbers - Test on the susceptibility to corrosion in a damp atmosphere of metals in contact with vulcanized rubbers
ONORM EN ISO 3821 : 2010 GAS WELDING EQUIPMENT - RUBBER HOSES FOR WELDING, CUTTING AND ALLIED PROCESSES
ISO 6505:2015 Rubber, vulcanized or thermoplastic Determination of tendency to adhere to and corrode metals
ISO 11193-1:2008 Single-use medical examination gloves Part 1: Specification for gloves made from rubber latex or rubber solution
EN ISO 10619-1:2018 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 1: Bending tests at ambient temperature (ISO 10619-1:2017)
ISO 10619-1:2017 Rubber and plastics hoses and tubing — Measurement of flexibility and stiffness — Part 1: Bending tests at ambient temperature
ISO 16010:2005 Elastomeric seals Material requirements for seals used in pipes and fittings carrying gaseous fuels and hydrocarbon fluids
ISO/TS 16095:2014 Reclaimed rubber derived from products containing mainly natural rubber Evaluation procedure
IEC 60984:2014 Live working - Electrical insulating sleeves
ISO 4659:2014 Styrene-butadiene rubber (carbon black or carbon black and oil masterbatches) Evaluation procedure
ISO 7663:2014 Halogenated isobutene-isoprene rubber (BIIR and CIIR) — Evaluation procedures
ONORM EN ISO 527-1 : 2012 PLASTICS - DETERMINATION OF TENSILE PROPERTIES - PART 1: GENERAL PRINCIPLES (ISO 527-1:2012)
IEC 60903:2014 Live working - Electrical insulating gloves
ISO 9631:2018 Rubber seals — Joint rings for pipelines for hot-water supply up to 110 °C — Specification for the material
ISO 15113:2005 Rubber — Determination of frictional properties
DIN EN ISO 6808:2014-10 PLASTICS HOSES AND HOSE ASSEMBLIES FOR SUCTION AND LOW-PRESSURE DISCHARGE OF PETROLEUM LIQUIDS - SPECIFICATION (ISO 6808:2014)
DIN EN ISO 14113:2014-02 GAS WELDING EQUIPMENT - RUBBER AND PLASTICS HOSE AND HOSE ASSEMBLIES FOR USE WITH INDUSTRIAL GASES UP TO 450 BAR (45 MPA) (ISO 14113:2013)
DIN EN 455-2:2015-07 MEDICAL GLOVES FOR SINGLE USE - PART 2: REQUIREMENTS AND TESTING FOR PHYSICAL PROPERTIES
DIN EN ISO 3994:2015-11 PLASTICS HOSES - HELICAL-THERMOPLASTIC-REINFORCED THERMOPLASTICS HOSES FOR SUCTION AND DISCHARGE OF AQUEOUS MATERIALS - SPECIFICATION (ISO 3994:2014)
DIN EN ISO 7233:2017-03 Rubber and plastics hoses and hose assemblies - Determination of resistance to vacuum (ISO 7233:2016)
DIN EN ISO 20344 E : 2013 PERSONAL PROTECTIVE EQUIPMENT - TEST METHODS FOR FOOTWEAR (ISO 20344:2011)
ISO 7326:2016 Rubber and plastics hoses Assessment of ozone resistance under static conditions
BS EN 853:2015 Rubber hoses and hose assemblies. Wire braid reinforced hydraulic type. Specification
ISO 1798:2008 Flexible cellular polymeric materials Determination of tensile strength and elongation at break
UNE-EN ISO 6808:2015 Plastics hoses and hose assemblies for suction and low-pressure discharge of petroleum liquids - Specification (ISO 6808:2014)
NF EN ISO 8031 : 2009 RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES - DETERMINATION OF ELECTRICAL RESISTANCE AND CONDUCTIVITY
ISO 1401:2016 Rubber hoses for agricultural spraying
UNE-ISO 1431-1:2017 Rubber, vulcanised or thermoplastic. Resistance to ozone cracking. Part 1: Static and dynamic strain testing
UNE-EN 853:2015 Rubber hoses and hose assemblies - Wire braid reinforced hydraulic type - Specification
UNE-EN ISO 2440:2001 Flexible and rigid cellular polymeric materials - Accelerated ageing tests (ISO 2440:1997)
ONORM EN ISO 8031 : 2010 RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES - DETERMINATION OF ELECTRICAL RESISTANCE AND CONDUCTIVITY
UNE-EN 60601-1:2008 Medical electrical equipment -- Part 1: General requirements for basic safety and essential performance
I.S. EN ISO 8031:2009 RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES - DETERMINATION OF ELECTRICAL RESISTANCE AND CONDUCTIVITY
DIN EN 856:2016-09 RUBER HOSES AND HOSE ASSEMBLIES - RUBBER-COVERED SPIRAL WIRE REINFORCED HYDRAULIC TYPE - SPECIFICATION
EN ISO 8031:2009 Rubber and plastics hoses and hose assemblies - Determination of electrical resistance and conductivity (ISO 8031:2009)
UNI EN ISO 8031 : 2009 RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES - DETERMINATION OF ELECTRICAL RESISTANCE AND CONDUCTIVITY
EN ISO 8033:2017 Rubber and plastics hoses - Determination of adhesion between components (ISO 8033:2016)
EN ISO 2440:1999/A2:2014 FLEXIBLE AND RIGID CELLULAR POLYMERIC MATERIALS - ACCELERATED AGEING TESTS (ISO 2440:1997/AMD 2:2014)
ONORM ISO 4649 : 2015 RUBBER, VULCANIZED OR THERMOPLATIC - DETERMINATION OF ABRASION RESISTANCE USING A ROTATING CYLINDRICAL DRUM DEVICE (ISO 4649:2010)
UNI EN ISO 14113 : 2013 GAS WELDING EQUIPMENT - RUBBER AND PLASTICS HOSE AND HOSE ASSEMBLIES FOR USE WITH INDUSTRIAL GASES UP TO 450 BAR (45 MPA)
UNI EN ISO 20344 : 2012 PERSONAL PROTECTIVE EQUIPMENT - TEST METHODS FOR FOOTWEAR
UNI EN 1844 : 2013 FLEXIBLE SHEETS FOR WATERPROOFING - DETERMINATION OF RESISTANCE TO OZONE - PLASTIC AND RUBBER SHEETS FOR ROOF WATERPROOFING
EN ISO 6808:2014 Plastics hoses and hose assemblies for suction and low-pressure discharge of petroleum liquids - Specification (ISO 6808:2014)
UNI EN ISO 4080 : 2010 RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES - DETERMINATION OF PERMEABILITY TO GAS
UNI EN ISO 4651 : 2009 CELLULAR RUBBERS AND PLASTICS - DETERMINATION OF DYNAMIC CUSHIONING PERFORMANCE
UNI ISO 1431-1 : 2013 RUBBER, VULCANIZED OR THERMOPLASTIC - RESISTANCE TO OZONE CRACKING - PART 1: STATIC AND DYNAMIC STRAIN TESTING
UNI EN ISO 2440 : 2014 FLEXIBLE AND RIGID CELLULAR POLYMERIC MATERIALS - ACCELERATED AGEING TESTS
UNI EN ISO 6808 : 2014 PLASTICS HOSES AND HOSE ASSEMBLIES FOR SUCTION AND LOW-PRESSURE DISCHARGE OF PETROLEUM LIQUIDS - SPECIFICATION
UNI EN ISO 3994 : 2014 PLASTICS HOSES - HELICAL-THERMOPLASTIC-REINFORCED THERMOPLASTICS HOSES FOR SUCTION AND DISCHARGE OF AQUEOUS MATERIALS - SPECIFICATION
UNI EN ISO 8030 : 2014 RUBBER AND PLASTICS HOSES - METHOD OF TEST FOR FLAMMABILITY
UNI EN ISO 527-1 : 2012 PLASTICS - DETERMINATION OF TENSILE PROPERTIES - PART 1: GENERAL PRINCIPLES
UNI EN ISO 2439 : 2009 FLEXIBLE CELLULAR POLYMERIC MATERIALS - DETERMINATION OF HARDNESS (INDENTATION TECHNIQUE)
UNI EN ISO 1798 : 2008 FLEXIBLE CELLULAR POLYMERIC MATERIALS - DETERMINATION OF TENSILE STRENGTH AND ELONGATION AT BREAK
UNE-ISO 7619-1:2011 Rubber, vulcanized or thermoplastic -- Determination of indentation hardness -- Part 1: Durometer method (Shore hardness)
NF EN ISO 178 : 2011 AMD 1 2013 PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES
UNI ISO 2393 : 2014 RUBBER TEST MIXES - PREPARATION, MIXING AND VULCANIZATION - EQUIPMENT AND PROCEDURES
ISO 1827:2016 Rubber, vulcanized or thermoplastic — Determination of shear modulus and adhesion to rigid plates — Quadruple-shear methods
I.S. EN 15807:2011 RAILWAY APPLICATIONS - PNEUMATIC HALF COUPLINGS
BS ISO 34-2:2015 Rubber, vulcanized or thermoplastic. Determination of tear strength Small (Delft) test pieces
06/30136465 DC : DRAFT MAY 2006 ISO 815-1 - RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF COMPRESSION SET - PART 1: AT AMBIENT AND ELEVATED TEMPERATURES
UNI ISO 3384 : 2009 RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF STRESS RELAXATION IN COMPRESSION AT AMBIENT AND AT ELEVATED TEMPERATURES
DIN EN ISO 7326:2015-10 (Draft) RUBBER AND PLASTICS HOSES - ASSESSMENT OF OZONE RESISTANCE UNDER STATIC CONDITIONS (ISO 7326:2016)
08/30162045 DC : DRAFT FEB 2008 BS ISO 4080 - RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES - DETERMINATION OF PERMEABILITY TO GAS
16/30317723 DC : 0 BS ISO 2930 - RUBBER, RAW NATURAL - DETERMINATION OF PLASTICITY RETENTION INDEX (PRI)
BS ISO 23794:2015 Rubber, vulcanized or thermoplastic. Abrasion testing. Guidance
BS ISO 5794-3:2011 Rubber compounding ingredients. Silica, precipitated, hydrated Evaluation procedures in a blend of solution styrene-butadiene rubber (S-SBR) and butadiene rubber (BR)
08/30180441 DC : DRAFT APR 2008 BS EN ISO 3386-2 AMD1 - FLEXIBLE CELLULAR POLYMERIC MATERIALS - DETERMINATION OF STRESS-STRAIN CHARACTERISTICS IN COMPRESSION - PART 2: HIGH-DENSITY MATERIALS
PD ISO/TS 16095:2014 Reclaimed rubber derived from products containing mainly natural rubber. Evaluation procedure
UNI EN ISO 30013 : 2011 RUBBER AND PLASTICS HOSES - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - DETERMINATION OF CHANGES IN COLOUR, APPEARANCE AND OTHER PHYSICAL PROPERTIES
NF ISO 2782-1 : 2016 RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF PERMEABILITY TO GASES - PART 1: DIFFERENTIAL-PRESSURE METHODS
UNI ISO 4666-2 : 2009 RUBBER, VULCANIZED - DETERMINATION OF TEMPERATURE RISE AND RESISTANCE TO FATIGUE IN FLEXOMETER TESTING - PART 2: ROTARY FLEXOMETER
BS ISO 10619-3:2011 Rubber and plastics hoses and tubing. Measurement of flexibility and stiffness Bending tests at high and low temperatures
ISO 1813:2014 Belt drives — V-ribbed belts, joined V-belts and V-belts including wide section belts and hexagonal belts — Electrical conductivity of antistatic belts: Characteristics and methods of test
BS ISO 18437-5:2011 Mechanical vibration and shock. Characterization of the dynamic mechanical properties of visco-elastic materials Poisson ratio based on comparison between measurements and finite element analysis
13/30276463 DC : 0 BS ISO 289-1 - RUBBER, UNVULCANIZED - DETERMINATIONS USING A SHEARING-DISC VISCOMETER - PART 1: DETERMINATION OF MOONEY VISCOSITY
04/30076756 DC : DRAFT MAY 2004 ISO 6505 - RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF TENDENCY TO ADHERE TO AND CORRODE METALS
DIN EN 16523-1 E : 2015 DETERMINATION OF MATERIAL RESISTANCE TO PERMEATION BY CHEMICALS - PART 1: PERMEATION BY LIQUID CHEMICAL UNDER CONDITIONS OF CONTINUOUS CONTACT
UNI ISO 2322 : 2014 STYRENE-BUTADIENE RUBBER (SBR) - EMULSION- AND SOLUTION-POLYMERIZED TYPES - EVALUATION PROCEDURES
UNI ISO 188 : 2012 RUBBER, VULCANIZED OR THERMOPLASTIC - ACCELERATED AGEING AND HEAT RESISTANCE TESTS
ISO 2930:2017 Rubber, raw natural — Determination of plasticity retention index (PRI)
BS ISO 27727:2008 Rubber, vulcanized. Measurement of fatigue crack growth rate
15/30320884 DC : 0 BS EN 2899 - AEROSPACE SERIES - VULCANIZED RUBBERS - TEST ON THE SUSCEPTIBILITY TO CORROSION IN A DAMP ATMOSPHERE OF METALS IN CONTACT WITH VULCANIZED RUBBERS
ISO 10960:2017 Rubber and plastics hoses — Assessment of ozone resistance under dynamic conditions
BS ISO 3302-1:2014 Rubber. Tolerances for products Dimensional tolerances
ISO 3821:2008 Gas welding equipment Rubber hoses for welding, cutting and allied processes
ISO 9924-3:2009 Rubber and rubber products — Determination of the composition of vulcanizates and uncured compounds by thermogravimetry — Part 3: Hydrocarbon rubbers, halogenated rubbers and polysiloxane rubbers after extraction
I.S. EN 16523-1:2015 DETERMINATION OF MATERIAL RESISTANCE TO PERMEATION BY CHEMICALS - PART 1: PERMEATION BY LIQUID CHEMICAL UNDER CONDITIONS OF CONTINUOUS CONTACT
ISO 7267-2:2008 Rubber-covered rollers Determination of apparent hardness Part 2: Shore-type durometer method
09/30196590 DC : 0 BS ISO 2878 - RUBBER, VULCANIZED - ANTISTATIC AND CONDUCTIVE PRODUCTS - DETERMINATION OF ELECTRICAL RESISTANCE
BS ISO 11999-6:2016 PPE for firefighters. Test methods and requirements for PPE used by firefighters who are at risk of exposure to high levels of heat and/or flame while fighting fires occurring in structures Footwear
NF ISO 3384-1 : 2012 AMD 1 2013 RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF STRESS RELAXATION IN COMPRESSION - PART 1: TESTING AT CONSTANT TEMPERATURE
UNI ISO 48 : 2011 RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF HARDNESS (HARDNESS BETWEEN 10 IRHD AND 100 IRHD)
BS ISO 4666-3:2016 Rubber, vulcanized. Determination of temperature rise and resistance to fatigue in flexometer testing Compression flexometer (constant-strain type)
08/30156909 DC : DRAFT APR 2008 BS EN 15807 - RAILWAY APPLICATIONS - PNEUMATIC HALF COUPLINGS
BS ISO 1432:2013 Rubber, vulcanized or thermoplastic. Determination of low-temperature stiffening (Gehman test)
12/30257022 DC : 0 BS EN 13611 - SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS OR LIQUID FUELS - GENERAL REQUIREMENTS
BS ISO 12493:2017 Rubber, vulcanized. Determination of stress in tension upon heating
DIN EN 16523-1:2015-04 DETERMINATION OF MATERIAL RESISTANCE TO PERMEATION BY CHEMICALS - PART 1: PERMEATION BY LIQUID CHEMICAL UNDER CONDITIONS OF CONTINUOUS CONTACT
EN ISO 1402:2009 Rubber and plastics hoses and hose assemblies - Hydrostatic testing (ISO 1402:2009)
BS ISO 7267-3:2017 Rubber-covered rollers. Determination of apparent hardness Pusey and Jones method
PD ISO/TR 12134:2010 Rubber. Estimation of uncertainty for test methods. Non-functional parameters
BS ISO 4659:2014 Styrene-butadiene rubber (carbon black or carbon black and oil masterbatches). Evaluation procedure
ISO 12000:2014 Plastics/rubber Polymer dispersions and rubber latices (natural and synthetic) Definitions and review of test methods
BS ISO 4081:2016 Rubber hoses and tubing for cooling systems for internal-combustion engines. Specification
BS ISO 12000:2014 Plastics/rubber. Polymer dispersions and rubber lattices (natural and synthetic). Definitions and review of test methods
BS ISO 5794-2:2014 Rubber compounding ingredients. Silica, precipitated, hydrated Evaluation procedures in styrene-butadiene rubber
BS ISO 27588:2012 Rubber, vulcanized or thermoplastic. Determination of dead-load hardness using the very low rubber hardness (VLRH) scale
BS ISO 34-1:2015 Rubber, vulcanized or thermoplastic. Determination of tear strength Trouser, angle and crescent test pieces
BS ISO 7619-2:2004 Rubber, vulcanized or thermoplastic. Determination of indentation hardness IRHD pocket meter method
ISO 4647:2010 Rubber, vulcanized Determination of static adhesion to textile cord H-pull test
13/30265627 DC : 0 BS ISO 2393 - RUBBER TEST MIXES - PREPARATION, MIXING AND VULCANIZATION - EQUIPMENT AND PROCEDURES
13/30265633 DC : 0 BS ISO 2476 - BUTADIENE RUBBER (BR) - SOLUTION-POLYMERIZED TYPES - EVALUATION PROCEDURES
BIS IS 3400-6 : 2012 METHODS OF TEST FOR VULCANIZED RUBBER - PART 6: DETERMINATION OF THE EFFECT OF LIQUIDS
ISO 188:2011 Rubber, vulcanized or thermoplastic — Accelerated ageing and heat resistance tests
BS ISO 132:2011 Rubber, vulcanized or thermoplastic. Determination of flex cracking and crack growth (De Mattia)
BS ISO 4649:2017 Rubber, vulcanized or thermoplastic. Determination of abrasion resistance using a rotating cylindrical drum device
BS ISO 19013-2:2005 Rubber hoses and tubing for fuel circuits for internal combustion engines. Specification Gasoline fuels
17/30334044 DC : 0 BS ISO 22762-1 - ELASTOMERIC SEISMIC-PROTECTION ISOLATORS - PART 1: TEST METHODS
BS ISO 9026:2007 Raw rubber or unvulcanized compounds. Determination of green strength
BS ISO 812:2017 Rubber, vulcanized or thermoplastic. Determination of low-temperature brittleness
13/30278121 DC : 0 BS ISO 3302-1 - RUBBER - TOLERANCES FOR PRODUCTS - PART 1: DIMENSIONAL TOLERANCES
07/30161672 DC : 0 BS ISO 24453 - RUBBER - ACQUISITION AND PRESENTATION OF COMPARABLE SINGLE-POINT DATA
ISO 1432:2013 Rubber, vulcanized or thermoplastic Determination of low-temperature stiffening (Gehman test)
17/30335677 DC : 0 BS EN ISO 178 - PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES
UNI ISO 4666-1 : 2011 RUBBER, VULCANIZED - DETERMINATION OF TEMPERATURE RISE AND RESISTANCE TO FATIGUE IN FLEXOMETER TESTING - PART 1: BASIC PRINCIPLES
04/30110689 DC : DRAFT MARCH 2004 BS ISO 37 - RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF TENSIILE STRESS-STRAIN PROPERTIES
UNI EN ISO 10619-3 : 2012 RUBBER AND PLASTICS HOSES AND TUBING - MEASUREMENT OF FLEXIBILITY AND STIFFNESS - PART 3: BENDING TESTS AT HIGH AND LOW TEMPERATURES
14/30295027 DC : 0 BS ISO 9563 - BELT DRIVES - ELECTRICAL CONDUCTIVITY OF ANTISTATIC ENDLESS SYNCHRONOUS BELTS - CHARACTERISTICS AND TEST METHOD
07/30161584 DC : 0 BS ISO 27727 - RUBBER, VULCANIZED - MEASUREMENT OF FATIGUE CRACK GROWTH RATE
ISO 1795:2017 Rubber, raw natural and raw synthetic — Sampling and further preparative procedures
UNI ISO 2921 : 2012 RUBBER, VULCANIZED - DETERMINATION OF LOW-TEMPERATURE RETRACTION (TR TEST)
DIN ISO 7743:2016-08 RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF COMPRESSION STRESS-STRAIN PROPERTIES (ISO 7743:2011)
UNI ISO 9924-3 : 2010 RUBBER AND RUBBER PRODUCTS - DETERMINATION OF THE COMPOSITION OF VULCANIZATES AND UNCURED COMPOUNDS BY THERMOGRAVIMETRY - PART 3: HYDROCARBON RUBBERS, HALOGENATED RUBBERS AND POLYSILOXANE RUBBERS AFTER EXTRACTION
UNI EN 15889 : 2011 FIRE-FIGHTING HOSES - TEST METHODS
ISO 2303:2011 Isoprene rubber (IR) Non-oil-extended, solution-polymerized types Evaluation procedures
PREN 2899 : 200P1 AEROSPACE SERIES - VULCANIZED RUBBERS - TEST ON THE SUSCEPTIBILITY TO CORROSION IN A DAMP ATMOSPHERE OF METALS IN CONTACT WITH VULCANIZED RUBBERS
UNE-ISO 1853:2012 Conducting and dissipative rubbers, vulcanised or thermoplastic. Measurement of resistivity
DIN ISO 815-1:2016-09 Rubber, vulcanized or thermoplastic - Determination of compression set - Part 1: At ambient or elevated temperatures (ISO 815-1:2014)
ISO 5794-2:2014 Rubber compounding ingredients — Silica, precipitated, hydrated — Part 2: Evaluation procedures in styrene-butadiene rubber
ISO 2393:2014 Rubber test mixes — Preparation, mixing and vulcanization — Equipment and procedures
UNE-ISO 34-1:2011 Rubber, vulcanized or thermoplastic -- Determination of tear strength -- Part 1: Trouser, angle and crescent test pieces
ISO 2781:2008 Rubber, vulcanized or thermoplastic Determination of density
ISO 812:2017 Rubber, vulcanized or thermoplastic — Determination of low-temperature brittleness
16/30318653 DC : 0 BS EN 681-1 - ELASTOMERIC SEALS - MATERIAL REQUIREMENTS FOR PIPE JOINT SEALS USED IN WATER AND DRAINAGE APPLICATIONS - PART 1: VULCANIZED RUBBER
ISO 11999-6:2016 PPE for firefighters Test methods and requirements for PPE used by firefighters who are at risk of exposure to high levels of heat and/or flame while fighting fires occurring in structures Part 6: Footwear
ISO 4666-1:2010 Rubber, vulcanized — Determination of temperature rise and resistance to fatigue in flexometer testing — Part 1: Basic principles
ISO 5772:2015 Rubber and plastic hoses and hose assemblies for measured fuel dispensing systems Specification
ISO/TS 16097:2013 Vulcanized crumb rubber — Evaluation procedures
I.S. EN ISO 10960:2018 RUBBER AND PLASTICS HOSES - ASSESSMENT OF OZONE RESISTANCE UNDER DYNAMIC CONDITIONS (ISO 10960:2017)
ISO 4633:2015 Rubber seals — Joint rings for water supply, drainage and sewerage pipelines — Specification for materials
BS EN ISO 8028:2018 Rubber and/or plastics hoses and hose assemblies for airless paint spraying. Specification
BS ISO 4666-4:2007 Rubber, vulcanized. Determination of temperature rise and resistance to fatigue in flexometer testing Constant-stress flexometer
BS ISO 1853:2011 Conducting and dissipative rubbers, vulcanized or thermoplastic. Measurement of resistivity
BS ISO 8789:2009 Rubber hoses and hose assemblies for liquefied petroleum gas in motor vehicles. Specification
BS ISO 2782-2:2012 Rubber, vulcanized or thermoplastic. Determination of permeability to gases Equal-pressure method
EN ISO 10960:2018 Rubber and plastics hoses - Assessment of ozone resistance under dynamic conditions (ISO 10960:2017)
17/30359551 DC : 0 BS EN 13832-1 - FOOTWEAR PROTECTING AGAINST CHEMICALS - PART 1: TERMINOLOGY AND TEST METHODS
DIN EN 13611:2016-09 SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
BS EN ISO 10960:2018 Rubber and plastics hoses. Assessment of ozone resistance under dynamic conditions
BIS IS 12657 : 2014 RUBBER AND PLASTICS HOSES - SUB-AMBIENT TEMPERATURE FLEXIBILITY TESTS
ISO 18437-3:2005 Mechanical vibration and shock — Characterization of the dynamic mechanical properties of visco-elastic materials — Part 3: Cantilever shear beam method
ISO 7619-2:2010 Rubber, vulcanized or thermoplastic Determination of indentation hardness Part 2: IRHD pocket meter method
PREN 13611 : DRAFT 2017 SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
ISO 2321:2017 Rubber threads — Methods of test
ISO 132:2017 Rubber, vulcanized or thermoplastic Determination of flex cracking and crack growth (De Mattia)
ISO 19013-2:2016 Rubber hoses and tubing for fuel circuits for internal combustion engines Specification Part 2: Gasoline fuels
ISO 48:2010 Rubber, vulcanized or thermoplastic Determination of hardness (hardness between 10 IRHD and 100 IRHD)
ISO 7619-1:2010 Rubber, vulcanized or thermoplastic Determination of indentation hardness Part 1: Durometer method (Shore hardness)
I.S. EN ISO 2440:2000 FLEXIBLE AND RIGID CELLULAR POLYMERIC MATERIALS - ACCELERATED AGEING TESTS
ISO 20873:2018 Footwear — Test methods for outsoles — Dimensional stability
ISO/TR 12134:2010 Rubber — Estimation of uncertainty for test methods — Non-functional parameters
ISO 2782-1:2016 Rubber, vulcanized or thermoplastic Determination of permeability to gases Part 1: Differential-pressure methods
ISO 18573:2012 Conveyor belts — Test atmospheres and conditioning periods
ISO 4649:2017 Rubber, vulcanized or thermoplastic — Determination of abrasion resistance using a rotating cylindrical drum device
BS EN ISO 2440 : 2000 FLEXIBLE AND RIGID CELLULAR POLYMERIC MATERIALS - ACCELERATED AGEING TESTS
ISO/TR 16098:2012 Reclaimed rubbers and reclaimed crumb rubbers Evaluation of dispersion in rubber mixes
DIN EN 13831:2007-12 Closed expansion vessels with built in diaphragm for installation in water
DIN EN ISO 2439:2009-05 FLEXIBLE CELLULAR POLYMERIC MATERIALS - DETERMINATION OF HARDNESS (INDENTATION TECHNIQUE)
DIN EN ISO 2440:2015-02 FLEXIBLE AND RIGID CELLULAR POLYMERIC MATERIALS - ACCELERATED AGEING TESTS (ISO 2440:1997 + AMD.1:2010 + AMD.2:2014)
BS EN ISO 1402:2009 Rubber and plastics hoses and hose assemblies. Hydrostatic testing
BS EN 60601-1 : 2006 MEDICAL ELECTRICAL EQUIPMENT PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE
UNE-EN ISO 7233:2017 Rubber and plastics hoses and hose assemblies - Determination of resistance to vacuum (ISO 7233:2016)
ISO 2439:2008 Flexible cellular polymeric materials Determination of hardness (indentation technique)
IEC 60601-1:2005+AMD1:2012 CSV Medical electrical equipment - Part 1: General requirements for basic safety and essential performance
ISO 8033:2016 Rubber and plastics hoses Determination of adhesion between components
BS EN ISO 5999:2013 Flexible cellular polymeric materials. Polyurethane foam for load-bearing applications excluding carpet underlay. Specification
DIN EN ISO 20344:2013-02 Personal protective equipment - Test methods for footwear (ISO 20344:2011)
UNE-EN ISO 1401:2017 Rubber hoses for agricultural spraying (ISO 1401:2016)
UNE-EN ISO 10619-1:2012 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 1: Bending tests at ambient temperature (ISO 10619-1:2011)
UNE-EN ISO 6179:2018 Rubber, vulcanized or thermoplastic - Rubber sheets and rubber-coated fabrics - Determination of transmission rate of volatile liquids (gravimetric technique) (ISO 6179:2017)
UNE-EN ISO 3821:2011 Gas welding equipment - Rubber hoses for welding, cutting and allied processes (ISO 3821:2008)
BS EN ISO 4080:2009 Rubber and plastics hoses and hose assemblies. Determination of permeability to gas
BS EN ISO 2439:2008 Flexible cellular polymeric materials. Determination of hardness (indentation technique)
BS EN 455-2:2015 Medical gloves for single use Requirements and testing for physical properties
UNE-EN 857:2015 Rubber hoses and hose assemblies - Wire braid reinforced compact type for hydraulic applications - Specification
UNE-EN ISO 10619-2:2012 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 2: Bending tests at sub-ambient temperatures (ISO 10619-2:2011)
BS EN ISO 6179:2017 Rubber, vulcanized or thermoplastic. Rubber sheets and rubber-coated fabrics. Determination of transmission rate of volatile liquids (gravimetric technique)
UNE-EN ISO 14113:2013 Gas welding equipment - Rubber and plastics hose and hose assemblies for use with industrial gases up to 450 bar (45 MPa) (ISO 14113:2013)
ISO 14113:2013 Gas welding equipment — Rubber and plastics hose and hose assemblies for use with industrial gases up to 450 bar (45 MPa)
ISO 2440:1997 Flexible and rigid cellular polymeric materials Accelerated ageing tests
ISO 8031:2009 Rubber and plastics hoses and hose assemblies Determination of electrical resistance and conductivity
ISO 7233:2016 Rubber and plastics hoses and hose assemblies Determination of resistance to vacuum
ISO 3994:2014 Plastics hoses — Helical-thermoplastic-reinforced thermoplastics hoses for suction and discharge of aqueous materials — Specification
ISO 3384:2005 Rubber, vulcanized or thermoplastic Determination of stress relaxation in compression at ambient and at elevated temperatures
BS EN ISO 8308:2015 Rubber and plastics hoses and tubing. Determination of transmission of liquids through hose and tubing walls
UNE-EN 1844:2013 Flexible sheets for waterproofing - Determination of resistance to ozone - Plastic and rubber sheets for roof waterproofing
ISO 6808:2014 Plastics hoses and hose assemblies for suction and low-pressure discharge of petroleum liquids — Specification
ISO 4080:2009 Rubber and plastics hoses and hose assemblies Determination of permeability to gas
I.S. EN 455-2:2015 MEDICAL GLOVES FOR SINGLE USE - PART 2: REQUIREMENTS AND TESTING FOR PHYSICAL PROPERTIES
ISO 6179:2017 Rubber, vulcanized or thermoplastic Rubber sheets and rubber-coated fabrics Determination of transmission rate of volatile liquids (gravimetric technique)
UNE-ISO 4649:2013 Rubber, vulcanized or thermoplastic — Determination of abrasion resistance using a rotating cylindrical drum device
ISO 8308:2015 Rubber and plastics hoses and tubing Determination of transmission of liquids through hose and tubing walls
BS EN ISO 3994:2014 Plastics hoses. Helical-thermoplastic-reinforced thermoplastics hoses for suction and discharge of aqueous materials. Specification
UNE-EN 455-2:2015 Medical gloves for single use - Part 2: Requirements and testing for physical properties
BS EN 13831:2007 Closed expansion vessels with built-in diaphragm for installation in water
ISO 1402:2009 Rubber and plastics hoses and hose assemblies Hydrostatic testing
UNE-EN ISO 8031:2010 Rubber and plastics hoses and hose assemblies - Determination of electrical resistance and conductivity (ISO 8031:2009)
ISO 5999:2013 Flexible cellular polymeric materials — Polyurethane foam for load-bearing applications excluding carpet underlay — Specification
ISO 4651:1988 Cellular rubbers and plastics — Determination of dynamic cushioning performance
ONORM EN ISO 2440 : 2015 FLEXIBLE AND RIGID CELLULAR POLYMERIC MATERIALS - ACCELERATED AGEING TESTS (ISO 2440:1997 + AMD 1:2010 + AMD 2:2014)
BS EN ISO 1401:2016 Rubber hoses for agricultural spraying
UNE-ISO 7743:2016 Rubber, vulcanized or thermoplastic. Determination of compression stress-strain properties
UNE-EN ISO 8308:2017 Rubber and plastics hoses and tubing - Determination of transmission of liquids through hose and tubing walls (ISO 8308:2015)
UNE-ISO 2781:2015 Rubber, vulcanized or thermoplastic. Determination of density
BS EN ISO 4651 : 1995 CELLULAR RUBBERS AND PLASTICS - DETERMINATION OF DYNAMIC CUSHIONING PERFORMANCE
EN 14879-5:2007 Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 5: Linings on concrete components
EN 853:2015 Rubber hoses and hose assemblies - Wire braid reinforced hydraulic type - Specification
EN ISO 3821:2010 Gas welding equipment - Rubber hoses for welding, cutting and allied processes (ISO 3821:2008)
EN ISO 8030:2014 Rubber and plastics hoses - Method of test for flammability (ISO 8030:2014)
EN ISO 2439:2008 Flexible cellular polymeric materials - Determination of hardness (indentation technique) (ISO 2439:2008)
EN ISO 8029:2014 Plastics hose - General-purpose collapsible water hose, textile-reinforced - Specification (ISO 8029:2014)
EN ISO 10619-3:2011 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 3: Bending tests at high and low temperatures (ISO 10619-3:2011)
EN ISO 4651:1995/A1:2008 CELLULAR RUBBERS AND PLASTICS - DETERMINATION OF DYNAMIC CUSHIONING PERFORMANCE
EN 455-2:2015 Medical gloves for single use - Part 2: Requirements and testing for physical properties
EN 854:2015 Rubber hoses and hose assemblies - Textile reinforced hydraulic type - Specification
EN ISO 30013:2011 Rubber and plastics hoses - Methods of exposure to laboratory light sources - Determination of changes in colour, appearance and other physical properties (ISO 30013:2011)
EN ISO 6179:2017 Rubber, vulcanized or thermoplastic - Rubber sheets and rubber-coated fabrics - Determination of transmission rate of volatile liquids (gravimetric technique) (ISO 6179:2017)
EN ISO 8308:2015 Rubber and plastics hoses and tubing - Determination of transmission of liquids through hose and tubing walls (ISO 8308:2015)
EN 15889:2011 Fire-fighting hoses - Test methods
EN ISO 16012:2015 Plastics - Determination of linear dimensions of test specimens (ISO 16012:2015)
EN 857:2015 Rubber hoses and hose assemblies - Wire braid reinforced compact type for hydraulic applications - Specification
EN ISO 3994:2014 PLASTICS HOSES - HELICAL-THERMOPLASTIC-REINFORCED THERMOPLASTICS HOSES FOR SUCTION AND DISCHARGE OF AQUEOUS MATERIALS - SPECIFICATION (ISO 3994:2014)
EN ISO 1401:2016 Rubber hoses for agricultural spraying (ISO 1401:2016)
EN ISO 527-1:2012 Plastics - Determination of tensile properties - Part 1: General principles (ISO 527-1:2012)
EN 856:2015 Rubber hoses and hose assemblies - Rubber-covered spiral wire reinforced hydraulic type - Specification
EN ISO 7326:2016 Rubber and plastics hoses - Assessment of ozone resistance under static conditions (ISO 7326:2016)
EN 13831:2007 Closed expansion vessels with built in diaphragm for installation in water
EN ISO 1798:2008 Flexible cellular polymeric materials - Determination of tensile strength and elongation at break (ISO 1798:2008)
EN ISO 14113:2013 Gas welding equipment - Rubber and plastics hose and hose assemblies for use with industrial gases up to 450 bar (45 MPa) (ISO 14113:2013)
EN ISO 4080:2009 Rubber and plastics hoses and hose assemblies - Determination of permeability to gas (ISO 4080:2009)
EN ISO 5999:2013 Flexible cellular polymeric materials - Polyurethane foam for load-bearing applications excluding carpet underlay - Specification (ISO 5999:2013)
EN 1844:2013 Flexible sheets for waterproofing - Determination of resistance to ozone - Plastic and rubber sheets for roof waterproofing
BIS IS 3660-7 : 2013 METHODS OF TEST FOR NATURAL RUBBER - PART 7: DETERMINATION OF MOONEY VISCOSITY
BS ISO 18573:2012 Conveyor belts. Test atmospheres and conditioning periods
BS ISO 1827:2016 Rubber, vulcanized or thermoplastic. Determination of shear modulus and adhesion to rigid plates. Quadruple-shear methods
BS ISO 17278:2013 Rubber, raw natural. Determination of the gel content of technically specified rubber (TSR)
BS ISO 4658:1999 Acrylonitrile-butadiene rubber (NBR). Evaluation procedure
ISO 2285:2013 Rubber, vulcanized or thermoplastic Determination of tension set under constant elongation, and of tension set, elongation and creep under constant tensile load
BS EN ISO 178 : 2010 PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES
BS ISO 10282:2014 Single-use sterile rubber surgical gloves. Specification
BS ISO 4664-2:2006 Rubber, vulcanized or thermoplastic. Determination of dynamic properties Torsion pendulum methods at low frequencies
BS ISO 48:2010 Rubber, vulcanized or thermoplastic. Determination of hardness (hardness between 10 IRHD and 100 IRHD)
DIN ISO 3384-1 E : 2015 RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF STRESS RELAXATION IN COMPRESSION - PART 1: TESTING AT CONSTANT TEMPERATURE (ISO 3384-1:2011 + AMD.1:2013)
16/30335302 DC : 0 BS ISO 1827 - RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF SHEAR MODULUS AND ADHESION TO RIGID PLATES - QUADRUPLE-SHEAR METHODS
17/30334047 DC : 0 BS ISO 22762-2 - ELASTOMERIC SEISMIC-PROTECTION ISOLATORS - PART 2: APPLICATIONS FOR BRIDGES - SPECIFICATIONS
UNI ISO 2475 : 2012 CHLOROPRENE RUBBER (CR) - GENERAL-PURPOSE TYPES - EVALUATION PROCEDURE
ISO 6916-1:1995 Flexible cellular polymeric materials — Sponge and expanded cellular rubber products — Specification — Part 1: Sheeting
BS EN ISO 7326:2016 Rubber and plastics hoses. Assessment of ozone resistance under static conditions
14/30288439 DC : 0 BS ISO 1817 - RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF THE EFFECT OF LIQUIDS
06/30113809 DC : DRAFT APR 2006 ISO 4666-4 - RUBBER, VULCANIZED - DETERMINATION OF TEMPERATURE RAISE AND RESISTANCE TO FATIGUE IN FLEXOMETER TESTING - PART 4: CONSTANT STRESS FLEXOMETER
DIN EN ISO 178 E : 2013 PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES (ISO 178:2010 + AMD.1:2013)
08/30166722 DC : DRAFT MAR 2008 BS ISO 4662 - RUBBER - DETERMINATION OF REBOUND RESILIENCE OF VULCANIZATES
PD ISO/TR 16098:2012 Reclaimed rubbers and reclaimed crumb rubbers. Evaluation of dispersion in rubber mixes
BS ISO 2393:2014 Rubber test mixes. Preparation, mixing and vulcanization. Equipment and procedures
UNE-ISO 4662:2013 Rubber, vulcanized or thermoplastic — Determination of rebound resilience
11/30212443 DC : 0 BS ISO 2782-1 - RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF PERMEABILITY TO GASES - PART 1: DIFFERENTIAL-PRESSURE METHODS
15/30317642 DC : 0 BS EN ISO 8028 - RUBBER AND/OR PLASTICS HOSES AND HOSE ASSEMBLIES FOR AIRLESS PAINT SPRAYING - SPECIFICATION
BS ISO 18437-1:2012 Mechanical vibration and shock. Characterization of the dynamic mechanical properties of visco-elastic materials Principles and guidelines
12/30261822 DC : 0 BS ISO 6914 - RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF AGEING CHARACTERISTICS BY MEASUREMENT OF STRESS RELAXATION IN TENSION
BS ISO 22762-1:2005 Elastomeric seismic-protection isolators Test methods
08/30176627 DC : DRAFT JAN 2008 BS ISO 2476 - RUBBER, BUTADIENE (BR) - SOLUTION-POLYMERIZED TYPES - EVALUATION PROCEDURES
14/30295538 DC : 0 BS ISO 2302 - ISOBUTENE-ISOPRENE RUBBER (IIR) - EVALUATION PROCEDURES
UNE-EN ISO 8029:2014 Plastics hose - General-purpose collapsible water hose, textile-reinforced - Specification (ISO 8029:2014)
BS ISO 4666-1:2010 Rubber, vulcanized. Determination of temperature rise and resistance to fatigue in flexometer testing Basic principles
BS EN ISO 16012:2015 Plastics. Determination of linear dimensions of test specimens
DIN ISO 3384-1:2015-12 Rubber, vulcanized or thermoplastic - Determination of stress relaxation in compression - Part 1: Testing at constant temperature (ISO 3384-1:2011 + Amd.1:2013)
15/30317636 DC : 0 BS EN ISO 1401 - RUBBER HOSES FOR AGRICULTURAL SPRAYING
DIN EN ISO 10619-3:2012-03 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 3: Bending tests at high and low temperatures (ISO 10619-3:2011)
15/30317681 DC : 0 BS EN ISO 7326 - RUBBER AND PLASTICS HOSES - ASSESSMENT OF OZONE RESISTANCE UNDER STATIC CONDITIONS
DIN EN 15889 E : 2011 FIRE-FIGHTING HOSES - TEST METHODS
15/30317648 DC : 0 BS ISO 8789 - RUBBER HOSES AND HOSE ASSEMBLIES FOR LIQUEFIED PETROLEUM GAS IN MOTOR VEHICLES - SPECIFICATION
14/30314166 DC : 0 BS EN 6109 - AEROSPACE SERIES - STATIC SEAL ELEMENTS ELASTOMER, MOULDED, PHOSPHATE ESTER RESISTANT - TECHNICAL SPECIFICATION
BS ISO 188:2011 Rubber, vulcanized or thermoplastic. Accelerated ageing and heat resistance tests
BS ISO 11752:2000 Flexible cellular polymeric materials. Moulded and extruded sponge or expanded cellular rubber products. Compressibility test on finished parts
06/30146275 DC : DRAFT FEB 2006 ISO 24415-1 - TIPS FOR WALKING AIDS - REQUIREMENTS AND TEST METHODS - PART 1: FRICTION OF TIPS
08/30178592 DC : DRAFT FEB 2008 BS ISO 6804 - RUBBER AND PLASTICS INLET HOSES AND HOSE ASSEMBLIES FOR WASHING-MACHINES AND DISHWASHERS - SPECIFICATION
BS ISO 6123-2:2015 Rubber or plastics covered rollers. Specifications Surface characteristics
09/30184526 DC : DRAFT MAY 2009 BS ISO 4666-3 - RUBBER, VULCANIZED - DETERMINATION OF TEMPERATURE RISE AND RESISTANCE TO FATIQUE IN FLEXOMETER TESTING - PART 3: COMPRESSION FLEXOMETER (CONSTANT-STRAIN TYPE)
10/30201343 DC : 0 BS ISO 5794-3 - RUBBER COMPOUNDING INGREDIENTS - SILICA, PRECIPITATED, HYDRATED - PART 3: EVALUATION PROCEDURES IN A MIXED SOLUTION OF STYRENE-BUTADIENE RUBBER AND BUTADIENE RUBBER
BS ISO 2528:2017 Sheet materials. Determination of water vapour transmission rate (WVTR). Gravimetric (dish) method
ISO 5600:2017 Rubber — Determination of adhesion to rigid materials using conical shaped parts
BS ISO 3384:2005 Rubber, vulcanized or thermoplastic. Determination of stress relaxationi n compression at ambient and at elevated temperatures
09/30193391 DC : DRAFT MAY 2009 BS ISO 7619-1 - RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF INDENTATION HARDNESS - PART 1: DUROMETER METHOD (SHORE HARDNESS)
BS EN 16523-1 : 2015 DETERMINATION OF MATERIAL RESISTANCE TO PERMEATION BY CHEMICALS - PART 1: PERMEATION BY LIQUID CHEMICAL UNDER CONDITIONS OF CONTINUOUS CONTACT
BS ISO 36:2017 Rubber, vulcanized or thermoplastic. Determination of adhesion to textile fabrics
PREN 1844 : DRAFT 2012 FLEXIBLE SHEETS FOR WATERPROOFING - DETERMINATION OF RESISTANCE TO OZONE - PLASTIC AND RUBBER SHEETS FOR ROOF WATERPROOFING
ISO 7743:2017 Rubber, vulcanized or thermoplastic Determination of compression stress-strain properties
ISO 17052:2007 Rubber, raw Determination of residual monomers and other volatile low-molecular-mass compounds by capillary gas chromatography Thermal desorption (dynamic headspace) method
UNI EN ISO 1402 : 2009 RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES - HYDROSTATIC TESTING
ISO/TS 16096:2014 Reclaimed isobutene-isoprene (IIR) rubber Evaluation procedure
ISO 4635:2011 Rubber, vulcanized Preformed joint seals for use between concrete paving sections of highways Specification
BIS IS 3400-2 : 2014 METHODS OF TEST FOR VULCANIZED RUBBER - PART 2: RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF HARDNESS (HARDNESS BETWEEN 10 IRHD AND 100 IRHD)
PREN 6109 : 200P2 AEROSPACE SERIES - STATIC SEAL ELEMENTS ELASTOMER, MOULDED, PHOSPHATE ESTER RESISTANT - TECHNICAL SPECIFICATION
I.S. EN 13832-1:2006 FOOTWEAR PROTECTING AGAINST CHEMICALS - PART 1: TERMINOLOGY AND TEST METHODS
ISO 1658:2015 Natural rubber (NR) Evaluation procedure
ISO 20057:2017 Rubber household gloves — General requirements and test methods
UNI ISO 6914 : 2014 RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF AGEING CHARACTERISTICS BY MEASUREMENT OF STRESS RELAXATION IN TENSION
BS EN ISO 3821:2010 Gas welding equipment. Rubber hoses for welding, cutting and allied processes
I.S. EN IEC 61730-2:2018 PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 2: REQUIREMENTS FOR TESTING
ISO 2528:2017 Sheet materials — Determination of water vapour transmission rate (WVTR) — Gravimetric (dish) method
ISO 17278:2013 Rubber, raw natural Determination of the gel content of technically specified rubber (TSR)
I.S. EN ISO 8028:2018 RUBBER AND/OR PLASTICS HOSES AND HOSE ASSEMBLIES FOR AIRLESS PAINT SPRAYING - SPECIFICATION (ISO 8028:2017)
ISO 2782:2006 Rubber, vulcanized or thermoplastic Determination of permeability to gases
ISO 5794-3:2011 Rubber compounding ingredients Silica, precipitated, hydrated Part 3: Evaluation procedures in a blend of solution styrene-butadiene rubber (S-SBR) and butadiene rubber (BR)
ISO 6123-2:2015 Rubber or plastics covered rollers — Specifications — Part 2: Surface characteristics
BIS IS 14794 : 2013 ISOBUTENE-ISOPRENE RUBBER (IIR) - EVALUATION PROCEDURES
UNE-ISO 815-1:2011 Rubber, vulcanized or thermoplastic -- Determination of compression set -- Part 1: At ambient or elevated temperatures
UNI EN ISO 10619-1 : 2012 RUBBER AND PLASTICS HOSES AND TUBING - MEASUREMENT OF FLEXIBILITY AND STIFFNESS - PART 1: BENDING TESTS AT AMBIENT TEMPERATURE
ISO 23337:2016 Rubber, vulcanized or thermoplastic — Determination of abrasion resistance using the Improved Lambourn test machine
UNI ISO 3387 : 2013 RUBBER - DETERMINATION OF CRYSTALLIZATION EFFECTS BY HARDNESS MEASUREMENTS
ISO 11193-2:2006 Single-use medical examination gloves — Part 2: Specification for gloves made from poly(vinyl chloride)
UNI EN ISO 8307 : 2008 FLEXIBLE CELLULAR POLYMERIC MATERIALS - DETERMINATION OF RESILIENCE BY BALL REBOUND
ISO 2475:2011 Chloroprene rubber (CR) — General-purpose types — Evaluation procedure
ISO 4666-2:2008 Rubber, vulcanized Determination of temperature rise and resistance to fatigue in flexometer testing Part 2: Rotary flexometer
ISO 4666-4:2007 Rubber, vulcanized Determination of temperature rise and resistance to fatigue in flexometer testing Part 4: Constant-stress flexometer
UNI ISO 1853 : 2012 CONDUCTING AND DISSIPATIVE RUBBERS, VULCANIZED OR THERMOPLASTIC - MEASUREMENT OF RESISTIVITY
ISO 18437-4:2008 Mechanical vibration and shock — Characterization of the dynamic mechanical properties of visco-elastic materials — Part 4: Dynamic stiffness method
DIN EN ISO 8307:2008-03 FLEXIBLE CELLULAR POLYMERIC MATERIALS - DETERMINATION OF RESILIENCE BY BALL REBOUND
ISO 3387:2012 Rubber Determination of crystallization effects by hardness measurements
CSA C22.2 No. 60601.1 : 2014 MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE
NF ISO 7619-2 : 2010 RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF INDENTATION HARDNESS - PART 2: IRHD POCKET METER METHOD
BS ISO 14309:2011 Rubber, vulcanized or thermoplastic. Determination of volume and/or surface resistivity
UNE-EN 13611:2016 Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - General requirements
EN ISO 178:2010/A1:2013 PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES (ISO 178:2010/AMD 1:2013)
NF ISO 2930 : 2017 RUBBER, RAW NATURAL - DETERMINATION OF PLASTICITY RETENTION INDEX (PRI)
BS EN 13832-1:2006 Footwear protecting against chemicals Terminology and test methods
ONORM EN ISO 178 : 2013 PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES (ISO 178:2010 + AMD 1:2013)
EN 13611:2015/AC:2016 SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
ISO 14309:2011 Rubber, vulcanized or thermoplastic Determination of volume and/or surface resistivity
IEC 61730-2 REDLINE : 2ED 2016 PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 2: REQUIREMENTS FOR TESTING
ISO 18437-1:2012 Mechanical vibration and shock — Characterization of the dynamic mechanical properties of visco-elastic materials — Part 1: Principles and guidelines
I.S. EN ISO 8307:2007 FLEXIBLE CELLULAR POLYMERIC MATERIALS - DETERMINATION OF RESILIENCE BY BALL REBOUND
ISO 30013:2011 Rubber and plastics hoses Methods of exposure to laboratory light sources Determination of changes in colour, appearance and other physical properties
BS EN ISO 1798:2008 Flexible cellular polymeric materials. Determination of tensile strength and elongation at break
ISO 20344:2011 Personal protective equipment Test methods for footwear
UNE-EN ISO 1402:2010 Rubber and plastics hoses and hose assemblies - Hydrostatic testing (ISO 1402:2009)
BS EN 854:2015 Rubber hoses and hose assemblies. Textile reinforced hydraulic type. Specification
ISO 8030:2014 Rubber and plastics hoses — Method of test for flammability
BS EN ISO 14113:2013 Gas welding equipment. Rubber and plastics hose and hose assemblies for use with industrial gases up to 450 bar (45 MPa)
BS EN ISO 6808:2014 Plastics hoses and hose assemblies for suction and low-pressure discharge of petroleum liquids. Specification
BS EN ISO 527-1:2012 Plastics. Determination of tensile properties General principles
ISO 8029:2014 Plastics hose — General-purpose collapsible water hose, textile-reinforced — Specification
DIN EN ISO 527-1:2012-06 PLASTICS - DETERMINATION OF TENSILE PROPERTIES - PART 1: GENERAL PRINCIPLES (ISO 527-1:2012)
I.S. EN 13611:2015/AC:2016 SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
DIN EN ISO 1798:2008-04 Flexible cellular polymeric materials - Determination of tensile strength and elongation at break (ISO 1798:2008)
DIN EN 857:2016-09 RUBBER HOSES AND HOSE ASSEMBLIES - WIRE BRAID REINFORCED COMPACT TYPE FOR HYDRAULIC APPLICATIONS - SPECIFICATION
DIN EN 854:2016-09 RUBBER HOSES AND HOSE ASSEMBLIES - TEXTILE REINFORCED HYDRAULIC TYPE - SPECIFICATION
DIN ISO 3384:2008-07 RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF STRESS RELAXATION IN COMPRESSION AT AMBIENT AND AT ELEVATED TEMPERATURES
DIN EN 14879-5:2007-10 Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 5: Linings on concrete components
DIN EN ISO 5999:2013-12 FLEXIBLE CELLULAR POLYMERIC MATERIALS - POLYURETHANE FOAM FOR LOAD-BEARING APPLICATIONS EXCLUDING CARPET UNDERLAY - SPECIFICATION (ISO 5999:2013)
IEC 61730-2:2016 RLV Photovoltaic (PV) module safety qualification - Part 2: Requirements for testing

AS/NZS 1335:2020 Gas welding equipment - Rubber hoses for welding, cutting and allied processes
ISO 525:2013 Bonded abrasive products General requirements
ISO 1795:2017 Rubber, raw natural and raw synthetic — Sampling and further preparative procedures
ISO 1382:2012 Rubber Vocabulary
ISO 13385-1:2011 Geometrical product specifications (GPS) Dimensional measuring equipment Part 1: Callipers; Design and metrological characteristics
ISO 3302-1:2014 Rubber — Tolerances for products — Part 1: Dimensional tolerances
ISO 2393:2014 Rubber test mixes — Preparation, mixing and vulcanization — Equipment and procedures

View more information
$180.92
Including GST where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Need help?
Call us on 131 242, then click here to start a Screen Sharing session
so we can help right away! Learn more