ISO 2431:2011
Withdrawn
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
View Superseded by
withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
Paints and varnishes Determination of flow time by use of flow cups
Available format(s)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
Withdrawn date
19-06-2019
Language(s)
French, English
Published date
10-11-2011
ISO 2431:2011 specifies a method for determining the flow time of paints, varnishes and related products that can be used to control consistency.
Four flow cups of similar dimensions, but having orifice diameters of 3 mm, 4 mm, 5 mm and 6 mm, are specified. Two methods for checking the flow cups for wear and tear are given in an annex.
Flow cups with a replaceable jet are not covered by ISO 2431 as the close tolerances on the supply of the material under test to the jet are not met.
Commonly used dipping flow cups are also not covered by ISO 2431. In general, the fabrication tolerances for such flow cups are greater than those of the flow cups specified in ISO 2431. Therefore flow time determinations with dipping flow cups give a precision which is lower than that obtained with the flow cups specified in ISO 2431.
The method is limited to testing materials for which the breakpoint of the flow from the orifice of the flow cup can be determined with certainty. This point is difficult to determine and reproduce for materials with flow times near the upper limit of the measurement range (100 s) due to slowing-down effects.
| DevelopmentNote |
Supersedes ISO/DIS 2431. (11/2011)
|
| DocumentType |
Standard
|
| Pages |
15
|
| PublisherName |
International Organization for Standardization
|
| Status |
Withdrawn
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| ONORM EN ISO 2431 : 2012 | Identical |
| NBN EN ISO 2431 : 2012 | Identical |
| NEN EN ISO 2431 : 2011 | Identical |
| NS EN ISO 2431 : 2011 | Identical |
| I.S. EN ISO 2431:2011 | Identical |
| PN EN ISO 2431 : 2012 | Identical |
| SN EN ISO 2431 : 2012 | Identical |
| UNI EN ISO 2431 : 2012 | Identical |
| SS-EN ISO 2431:2011 | Identical |
| UNE-EN ISO 2431:2012 | Identical |
| BS EN ISO 2431:2011 | Identical |
| EN ISO 2431:2011 | Identical |
| NF EN ISO 2431 : 2011 | Identical |
| DIN EN ISO 2431:2012-03 | Identical |
| BS EN 535:1991 | Identical |
| DIN EN 535:1991-09 | Identical |
| BS 3900-A6:1986 | Identical |
| EN 535 : 1991 | Identical |
| UNI 8356 : 1982 AMD 1 1990 | Similar to |
| I.S. EN 535:1992 | Identical |
| BS 3900-A6(1996) : 1996 | Identical |
| 92/75745 DC : DRAFT MAY 1992 | PREN 3847 - AEROSPACE SERIES - PAINTS AND VARNISHES - DETERMINATION OF THE SEDIMENTATION RATING |
| 16/30326248 DC : 0 | BS EN 12542 - LPG EQUIPMENT AND ACCESSORIES - STATIC WELDED STEEL CYLINDRICAL TANKS, SERIALLY PRODUCED FOR THE STORAGE OF LIQUEFIED PETROLEUM GAS (LPG) HAVING A VOLUME NOT GREATER THAN 13 M[3] - DESIGN AND MANUFACTURE |
| BS ISO/TS 12928:1999 | Lubricants, industrial oils and related products (class L). Family R (products for temporary protection against corrosion). Guidelines for establishing specifications |
| 13/30283193 DC : 0 | BS EN 3021 - AEROSPACE SERIES - MOLYBDENUM DISULPHIDE DRY FILM LUBRICANTS GRAPHITE FREE - TECHNICAL SPECIFICATIONS |
| 15/30327431 DC : 0 | BS ISO 15741 - PAINTS AND VARNISHES - FRICTION-REDUCTION COATINGS FOR THE INTERIOR OF ON- AND OFFSHORE STEEL PIPELINES FOR NON-CORROSIVE GASES |
| PREN 1504-2 : DRAFT 2015 | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 2: SURFACE PROTECTION SYSTEMS FOR CONCRETE |
| 92/75744 DC : DRAFT MAY 1992 | PREN 3836 - AEROSPACE SERIES - PAINTS AND VARNISHES - DETERMINATION OF THE REACTIVITY OF TWO COMPONENT PAINTS |
| ONORM EN 4687 : 2012 | AEROSPACE SERIES - PAINTS AND VARNISHES - CHROMATE FREE NON CORROSION INHIBITING TWO COMPONENTS COLD CURING PRIMER FOR MILITARY APPLICATION |
| BS EN 3021:2017 | Aerospace series. Molybdenum disulphide dry film lubricants graphite and halogen free. Technical specification |
| BS 6782-16.1(2000) : 2000 AMD 15238 | BINDERS FOR PAINTS AND VARNISHES - PART 16: METHODS FOR TEST FOR ALKYD RESINS - SECTION 16.1: GENERAL METHODS |
| BS 6782-14.1(2000) : 2000 AMD 10883 | BINDERS FOR PAINTS AND VARNISHES - PART 14 - METHODS OF TEST FOR ALKYD RESINS - SECTION 14.1 - GENERAL METHODS |
| BS 5629-2:1979 | Insulating varnishes containing solvent Test methods |
| DIN 28054-1:2000-09 | CHEMICAL APPARATUS - COATING WITH ORGANIC MATERIALS FOR METALLIC COMPONENTS - PART 1: REQUIREMENTS AND TESTING |
| DIN EN 14188-4:2009-10 | Joint fillers and sealants - Part 4: Specifications for primers to be used with joint sealants |
| PREN 2435-05 : 200P1 | AEROSPACE SERIES - PAINTS AND VARNISHES - CORROSION RESISTANT CHROMATED TWO COMPONENT COLD CURING EPOXY PRIMER - PART 05: HIGH CORROSION RESISTANCE FOR MILITARY APPLICATION |
| PREN 3021 : DRAFT 2015 | AEROSPACE SERIES - MOLYBDENUM DISULPHIDE DRY FILM LUBRICANTS GRAPHITE AND HALOGEN FREE - TECHNICAL SPECIFICATION |
| ISO 3251:2008 | Paints, varnishes and plastics Determination of non-volatile-matter content |
| ISO 16053:2010 | Paints and varnishes Coating materials and coating systems for exterior wood Natural weathering test |
| I.S. EN 927-3:2012 | PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD - PART 3: NATURAL WEATHERING TEST |
| DIN EN 1504-2:2015-03 (Draft) | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 2: SURFACE PROTECTION SYSTEMS FOR CONCRETE |
| DIN EN ISO 9514 E : 2005 | PAINTS AND VARNISHES - DETERMINATION OF THE POT LIFE OF MULTICOMPONENT COATING SYSTEMS - PREPARATION AND CONDITIONING OF SAMPLES AND GUIDELINES FOR TESTING |
| BS EN 14879-2:2006 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media Coatings on metallic components |
| BS EN 2436-006:2006 | Aerospace series. Paints and varnishes. Corrosion resistant chromate-free two component cold curing epoxy primer High corrosion resistance for military application |
| EN 71-2:2011+A1:2014 | Safety of toys - Part 2: Flammability |
| DIN ISO 4619:2002-04 | DRIERS FOR PAINTS AND VARNISHES |
| DIN EN 14879-2:2007-02 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 2: Coatings on metallic components |
| EN 10300:2005 | Steel tubes and fittings for onshore and offshore pipelines - Bituminous hot applied materials for external coating |
| EN 10301:2003 | Steel tubes and fittings for on and offshore pipelines - Internal coating for the reduction of friction for conveyance of non corrosive gas |
| I.S. EN 10300:2005 | Steel tubes and fittings for onshore and offshore pipelines -Bituminous hot applied materials for external coating |
| DIN ISO 4619 E : 2002 | DRIERS FOR PAINTS AND VARNISHES |
| BS 5664-2.1(1979) : 1979 | SOLVENTLESS POLYMERISABLE RESINOUS COMPOUNDS USED FOR ELECTRICAL INSULATION - METHODS OF TEST |
| BS EN ISO 4619:2010 | Driers for paints and varnishes |
| UNI EN ISO 4619 : 2011 | DRIERS FOR PAINTS AND VARNISHES |
| DIN ISO 8780-4 : 1992 | PIGMENTS AND EXTENDERS - METHODS OF DISPERSION FOR ASSESSMENT OF DISPERSION CHARACTERISTICS - DISPERSION USING A BEAD MILL |
| 93/708490 DC : 0 | PREN 3840 - AEROSPACE SERIES - PAINTS AND VARNISHES TECHNICAL SPECIFICATION |
| BS 7066-2:1990 | Wood preservatives. Laboratory method for determining the protective effectiveness of a preservative treatment against blue stain in service Application by methods other than brushing |
| BS ISO 15741:2016 | Paints and varnishes. Friction-reduction coatings for the interior of on- and offshore steel pipelines for non-corrosive gases |
| UNE-EN 14188-4:2010 | Joint fillers and sealants - Part 4: Specifications for primers to be used with joint sealants |
| BS EN 60464-2:2001 | Varnishes used for electrical insulation Methods of test |
| BS EN 14188-4:2009 | Joint fillers and sealants Specifications for primers to be used with joint sealants |
| I.S. EN 4476:2011 | AEROSPACE SERIES - PAINTS AND VARNISHES - COLD CURING INTERMEDIATE COAT |
| 06/30139194 DC : DRAFT JAN 2006 | ISO 8124-2 - SAFETY OF TOYS - PART 2: FLAMMABILITY |
| PREN 4594 : 200P1 | AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENT COLD CURING POLYURETHANE FINISH - SUPERSONIC EROSION RESISTANCE |
| I.S. EN 4687:2012 | AEROSPACE SERIES - PAINTS AND VARNISHES - CHROMATE FREE NON CORROSION INHIBITING TWO COMPONENTS COLD CURING PRIMER FOR MILITARY APPLICATION |
| SAE AMS 3604 : 2015 | HEAT RESISTANT ALUMINIZED PAINT |
| I.S. EN 14188-4:2009 | JOINT FILLERS AND SEALANTS - PART 4: SPECIFICATIONS FOR PRIMERS TO BE USED WITH JOINT SEALANTS |
| PREN 71-2 : DRAFT 2010 | SAFETY OF TOYS - PART 2: FLAMMABILITY |
| UNI EN 4476 : 2012 | AEROSPACE SERIES - PAINTS AND VARNISHES - COLD CURING INTERMEDIATE COAT |
| NF EN ISO 4619 : 2011 | DRIERS FOR PAINTS AND VARNISHES |
| DIN EN 927-3:2012-10 | PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD - PART 3: NATURAL WEATHERING TEST |
| DIN EN ISO 7142:2007-05 | Binders for paints and varnishes - Epoxy resins - General methods of test (ISO 7142:2007) |
| DIN ISO 6744-1:2002-11 | BINDERS FOR PAINTS AND VARNISHES - ALKYD RESINS - PART 1: GENERAL METHOD OF TEST |
| I.S. EN 71-2:2011 | SAFETY OF TOYS - PART 2: FLAMMABILITY |
| UNI EN 4687 : 2013 | AEROSPACE SERIES - PAINTS AND VARNISHES - CHROMATE FREE NON CORROSION INHIBITING TWO COMPONENTS COLD CURING PRIMER FOR MILITARY APPLICATION |
| I.S. EN ISO 7142:2007 | BINDERS FOR PAINTS AND VARNISHES - EPOXY RESINS - GENERAL METHODS OF TEST |
| ONORM EN 71-2 : 2014 | SAFETY OF TOYS - PART 2: FLAMMABILITY |
| EN 4687:2012 | Aerospace series - Paints and varnishes - Chromate free non corrosion inhibiting two components cold curing primer for military application |
| DIN EN 71-2:2003-10 | SAFETY OF TOYS - PART 2: FLAMMABILITY |
| I.S. EN 2491:2011 | AEROSPACE SERIES - MOLYBDENUM DISULPHIDE DRY LUBRICANTS - COATING METHODS |
| I.S. EN 3840:2007 | AEROSPACE SERIES - PAINTS AND VARNISHES - TECHNICAL SPECIFICATION |
| BS ISO 4619 : 1998 | DRIERS FOR PAINTS AND VARNISHES |
| 14/30294441 DC : 0 | BS ISO 2834-2 - GRAPHIC TECHNOLOGY - LABORATORY PREPARATION TEST PRINTS - PART 2: LIQUID PRINTING INKS |
| BS EN 4595:2013 | Aerospace series. Paints and varnishes. Two component cold curing polyurethane finish. Subsonic erosion resistance |
| 09/30205293 DC : 0 | BS EN 4687 - AEROSPACE SERIES - PAINTS AND VARNISHES - CHROMATE FREE (NON CORROSION INHIBITING) TWO COMPONENT COLD CURING PRIMER - CHROMAT FREE PRIMER FOR MILITARY APPLICATION |
| BS 3483-D2(1991) : 1991 AMD 8529 | METHODS FOR TESTING PIGMENTS FOR PAINTS - METHOD OF DISPERSION FOR ASSESSMENT OF DISPERSION CHARACTERISTICS USING AN OSCILLATORY SHAKING MACHINE |
| 10/30227074 DC : 0 | BS EN 71-2 - SAFETY OF TOYS - PART 2: FLAMMABILITY |
| 98/711668 DC : DRAFT AUG 98 | PREN 10301 - STEEL TUBES AND FITTINGS FOR ON AND OFFSHORE PIPELINES - INTERNAL COATING FOR THE REDUCTION OF FRICTION FOR CONVEYANCE OF NON CORROSIVE GAS |
| BS EN 60455-2:2015 | Resin based reactive compounds used for electrical insulation Methods of test |
| 04/30109201 DC : DRAFT OCT 2004 | EN 14879-2 - ORGANIC COATING SYSTEMS AND LININGS FOR PROTECTION OF INDUSTRIAL APPARATUS AND PLANTS AGAINST CORROSION CAUSED BY AGGRESSIVE MEDIA - PART 2: COATINGS ON METALLIC COMPONENTS |
| BS ISO 16862 : 2003 AMD 16867 | PAINTS AND VARNISHES - EVALUATION OF SAG RESISTANCE |
| PREN 2436-06 : 200P1 | AEROSPACE SERIES - PAINTS AND VARNISHES - CORROSION RESISTANT CHROMATE-FREE TWO COMPONENT COLD CURING EPOXY PRIMER - PART 06: HIGH CORROSION RESISTANCE FOR MILITARY APPLICATION |
| I.S. EN 4594:2013 | AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENT COLD CURING POLYURETHANE FINISH - SUPERSONIC EROSION RESISTANCE |
| PREN 2434-05 : 200P1 | AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENT COLD CURING POLYURETHANE FINISH - PART 05: HIGH FLEXIBILITY AND CHEMICAL AGENT RESISTANCE FOR MILITARY APPLICATION |
| I.S. EN 4595:2013 | AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENT COLD CURING POLYURETHANE FINISH - SUBSONIC EROSION RESISTANCE |
| UNI EN 4594 : 2013 | AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENT COLD CURING POLYURETHANE FINISH - SUPERSONIC EROSION RESISTANCE |
| I.S. EN 60455-2:2015 | RESIN BASED REACTIVE COMPOUNDS USED FOR ELECTRICAL INSULATION - PART 2: METHODS OF TEST |
| UNI EN 14188-4 : 2009 | JOINT FILLERS AND SEALANTS - PART 4: SPECIFICATIONS FOR PRIMERS TO BE USED WITH JOINT SEALANTS |
| ASTM D 5125 : 2010 : R2014 | Standard Test Method for Viscosity of Paints and Related Materials by ISO Flow Cups |
| PREN 12542 : DRAFT 2016 | LPG EQUIPMENT AND ACCESSORIES - STATIC WELDED STEEL CYLINDRICAL TANKS, SERIALLY PRODUCED FOR THE STORAGE OF LIQUEFIED PETROLEUM GAS (LPG) HAVING A VOLUME NOT GREATER THAN 13 M[3] - DESIGN AND MANUFACTURE |
| I.S. EN ISO 3251:2008 | PAINTS, VARNISHES AND PLASTICS - DETERMINATION OF NON-VOLATILE-MATTER CONTENT |
| I.S. EN 60464-2:2002 | VARNISHES USED FOR ELECTRICAL INSULATION - PART 2: METHODS OF TEST |
| DIN EN 14879-2 E : 2007 | ORGANIC COATING SYSTEMS AND LININGS FOR PROTECTION OF INDUSTRIAL APPARATUS AND PLANTS AGAINST CORROSION CAUSED BY AGGRESSIVE MEDIA - PART 2: COATINGS ON METALLIC COMPONENTS |
| DIN EN 14879-3 E : 2007 | ORGANIC COATING SYSTEMS AND LININGS FOR PROTECTION OF INDUSTRIAL APPARATUS AND PLANTS AGAINST CORROSION CAUSED BY AGGRESSIVE MEDIA - PART 3: COATINGS ON CONCRETE COMPONENTS |
| DIN EN ISO 16862:2006-08 | Paints and varnishes - Evaluation of sag resistance (ISO 16862:2003) |
| DIN EN ISO 3251:2008-06 | PAINTS, VARNISHES AND PLASTICS - DETERMINATION OF NON-VOLATILE MATTER CONTENT |
| ISO 16862:2003 | Paints and varnishes Evaluation of sag resistance |
| BS EN 13966-1:2003 | Determination of the transfer efficiency of atomising and spraying equipment for liquid coating materials Flat panels |
| BS EN 1504-2:2004 | Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and evaluation of conformity Surface protection systems for concrete |
| BS EN ISO 6744-1:2004 | Binders for paints and varnishes. Alkyd resins General methods |
| DIN EN 1504-2:2005-01 | Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 2: Surface protection systems for concrete; German version EN 1504-2:2004 |
| UNE-EN 927-3:2013 | Paints and varnishes - Coating materials and coating systems for exterior wood - Part 3: Natural weathering test |
| EN ISO 4619:2010 | Driers for paints and varnishes (ISO 4619:1998) |
| EN 14188-4:2009 | Joint fillers and sealants - Part 4: Specifications for primers to be used with joint sealants |
| UNI EN 2491 : 2012 | AEROSPACE SERIES - MOLYBDENUM DISULPHIDE DRY LUBRICANTS - COATING METHODS |
| ISO 15741:2016 | Paints and varnishes — Friction-reduction coatings for the interior of on- and offshore steel pipelines for non-corrosive gases |
| 09/30205299 DC : 0 | BS EN 4688 - AEROSPACE SERIES - PAINTS AND VARNISHES - CORROSION RESISTANT CHROMATED TWO COMPONENT COLD CURING EPOXY PRIMER - HIGH CORROSION RESISTANCE FOR MILITARY APPLICATION |
| 03/310937 DC : DRAFT JUNE 2003 | EN 2436-6 - AEROSPACE SERIES - PAINTS AND VARNISHES - CORROSION RESISTANT CHROMATE FREE TWO COMPONENT COLD CURING PRIMER - PART 6: HIGH CORROSION RESISTANCE FOR MILITARY APPLICATION |
| 17/30358597 DC : 0 | BS EN ISO 4619 - DRIERS FOR PAINTS AND VARNISHES |
| I.S. EN ISO 16104:2003 | PACKAGING - TRANSPORT PACKAGING FOR DANGEROUS GOODS - TEST METHODS |
| BS EN 4594:2013 | Aerospace series. Paints and varnishes. Two component cold curing polyurethane finish. Supersonic erosion resistance |
| 06/30158432 DC : 0 | BS ISO 2834-2 - GRAPHIC TECHNOLOGY - LABORATORY PREPARATION TEST PRINTS - PART 2: LIQUID PRINTING INKS |
| BS 3483-D4(1991) : 1991 AMD 8527 | METHODS FOR TESTING PIGMENTS FOR PAINTS - METHOD OF DISPERSION FOR ASSESSMENT OF DISPERSION CHARACTERISTICS USING A BEAD MILL |
| ONORM EN ISO 3251 : 2008 | PAINTS, VARNISHES AND PLASTICS - DETERMINATION OF NON-VOLATILE-MATTER CONTENT |
| 09/30214446 DC : 0 | BS EN 2491 - AEROSPACE SERIES MOLYBDENUM DISULPHIDE DRY LUBRICANTS COATING METHODS |
| BS 3900-A7.2(2003) : 2003 AMD 16864 | METHODS OF TEST FOR PAINTS - GROUP A: TESTS ON LIQUID PAINTS (EXCLUDING CHEMICAL TESTS) - PART A7: DETERMINATION OF THE VISCOSITY OF PAINT AT A HIGH RATE OF SHEAR - SECTION A7-2: DISC OR BALL VISCOMETER OPERATED AT A SPECIFIED SPEED |
| BS 7066-1:1990 | Wood preservatives. Laboratory method for determining the protective effectiveness of a preservative treatment against blue stain in service Brushing procedure |
| I.S. EN 3021:2017 | AEROSPACE SERIES - MOLYBDENUM DISULPHIDE DRY FILM LUBRICANTS GRAPHITE AND HALOGEN FREE - TECHNICAL SPECIFICATION |
| 15/30316975 DC : 0 | BS EN 1504-2 - PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 2: SURFACE PROTECTION SYSTEMS FOR CONCRETE |
| ASTM D 5125 : 2010 | Standard Test Method for Viscosity of Paints and Related Materials by ISO Flow Cups |
| UNI EN 927-3 : 2012 | PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD - PART 3: NATURAL WEATHERING TEST |
| I.S. EN ISO 9514:2005 | PAINTS AND VARNISHES - DETERMINATION OF THE POT LIFE OF MULTICOMPONENT COATING SYSTEMS - PREPARATION AND CONDITIONING OF SAMPLES AND GUIDELINES FOR TESTING |
| BS EN ISO 16104:2003 | Packaging. Transport packaging for dangerous goods. Test methods |
| UNE-EN 1504-2:2005 | Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 2: Surface protection systems for concrete |
| BS EN 10301:2003 | Steel tubes and fittings for on and offshore pipelines. Internal coating for the reduction of friction for conveyance of non corrosive gas |
| BS EN ISO 7142:2007 | Binders for paints and varnishes. Epoxy resins. General methods of test |
| BS EN 2491:2011 | Aerospace series. Molybdenum disulphide dry lubricants. Coating methods |
| BS EN 927-3:2012 | Paints and varnishes. Coating materials and coating systems for exterior wood Natural weathering test |
| IEC 60455-2:2015 | Resin based reactive compounds used for electrical insulation - Part 2: Methods of test |
| IEC 60464-2:2001+AMD1:2006 CSV | Varnishes used for electrical insulation - Part 2: Methods of test |
| BS EN 14879-3:2006 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media Coatings on concrete components |
| ISO 6744-1:1999 | Binders for paints and varnishes — Alkyd resins — Part 1: General methods of test |
| BS EN ISO 16862:2006 | Paints and varnishes. Evaluation of sag resistance |
| BS EN 10300:2005 | Steel tubes and fittings for onshore and offshore pipelines. Bitumen hot applied materials for external coating |
| BS EN 71-2 : 2011 | SAFETY OF TOYS - PART 2: FLAMMABILITY |
| BS EN ISO 3251:2008 | Paints, varnishes and plastics. Determination of non- volatile-matter content |
| BS EN 2435-005:2006 | Aerospace series. Paints and varnishes. Corrosion resistant chromated two component cold curing primer High corrosion resistance for military application |
| BS EN ISO 9514:2005 | Paints and varnishes. Determination of the pot life of multicomponent coating systems. Preparation and conditioning of samples and guidelines for testing |
| ISO 8780-2:1990 | Pigments and extenders — Methods of dispersion for assessment of dispersion characteristics — Part 2: Dispersion using an oscillatory shaking machine |
| ISO 7142:2007 | Binders for paints and varnishes — Epoxy resins — General methods of test |
| ISO 8780-4:1990 | Pigments and extenders — Methods of dispersion for assessment of dispersion characteristics — Part 4: Dispersion using a bead mill |
| ISO 16104:2003 | Packaging — Transport packaging for dangerous goods — Test methods |
| UNE-EN ISO 4619:2011 | Driers for paints and varnishes (ISO 4619:1998) |
| EN ISO 3251:2008 | Paints, varnishes and plastics - Determination of non-volatile-matter content (ISO 3251:2008) |
| EN 14879-3:2006 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 3: Coatings on concrete components |
| EN 14879-2:2006 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 2: Coatings on metallic components |
| EN 927-3:2012 | Paints and varnishes - Coating materials and coating systems for exterior wood - Part 3: Natural weathering test |
| EN 12092:2001 | Adhesives - Determination of viscosity |
| EN ISO 7142:2007 | Binders for paints and varnishes - Epoxy resins - General methods of test (ISO 7142:2007) |
| EN 4476:2011 | Aerospace series - Paints and varnishes - Cold curing intermediate coat |
| EN ISO 16104 : 2003 | PACKAGING - TRANSPORT PACKAGING FOR DANGEROUS GOODS - TEST METHODS |
| EN 4594:2013 | Aerospace series - Paints and varnishes - Two component cold curing polyurethane finish - Supersonic erosion resistance |
| EN 3840:2007 | Aerospace series - Paints and varnishes - Technical specification |
| EN ISO 9514:2005 | Paints and varnishes - Determination of the pot life of multicomponent coating systems - Preparation and conditioning of samples and guidelines for testing (ISO 9514:2005) |
| EN ISO 16862:2006 | Paints and varnishes - Evaluation of sag resistance (ISO 16862:2003) |
| EN 2434-005:2006 | Aerospace series - Paints and varnishes - Two component cold curing polyurethane finish - Part 005: High flexibility and chemical agent resistance for military application |
| EN ISO 8780-4 : 1995 | Pigments and extenders - Methods of dispersion for assessment of dispersion characteristics - Part 4: Dispersion using a bead mill (ISO 8780-4:1990) |
| EN 2435-005:2006 | Aerospace series - Paints and varnishes - Corrosion resistant chromated two component cold curing primer - Part 005: High corrosion resistance for military application |
| EN 4595:2013 | Aerospace series - Paints and varnishes - Two component cold curing polyurethane finish - Subsonic erosion resistance |
| EN ISO 6744-1:2004 | Binders for paints and varnishes - Alkyd resins - Part 1: General methods of test (ISO 6744-1:1999) |
| EN 2491:2011 | Aerospace series - Molybdenum disulphide dry lubricants - Coating methods |
| EN 1504-2:2004 | Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 2: Surface protection systems for concrete |
| EN 2436-006:2006 | Aerospace series - Paints and varnishes - Corrosion resistant chromate-free two component cold curing epoxy primer - Part 006: High corrosion resistance for military application |
| EN ISO 8780-2 : 1995 | PIGMENTS AND EXTENDERS - METHODS OF DISPERSION FOR ASSESSMENT OF DISPERSION CHARACTERISTICS - PART 2: DISPERSION USING AN OSCILLATORY SHAKING MACHINE |
| EN 3021:2017 | Aerospace series - Molybdenum disulphide dry film lubricants graphite and halogen free - Technical specification |
| EN 13966-1 : 2003 | DETERMINATION OF THE TRANSFER EFFICIENCY OF ATOMISING AND SPRAYING EQUIPMENT FOR LIQUID COATING MATERIALS - PART 1: FLAT PANELS |
| BS ISO 2834-2:2015 | Graphic technology. Laboratory preparation test prints Liquid printing inks |
| 06/30155770 DC : DRAFT SEP 2006 | BS ISO 3251 - PAINTS, VARNISHES AND PLASTICS - DETERMINATION OF NON-VOLATILE MATTER CONTENT |
| DIN ISO 8780-2:1992-04 | PIGMENTS AND EXTENDERS - METHODS OF DISPERSION FOR ASSESSMENT OF DISPERSION CHARACTERISTICS - DISPERSION USING AN OSCILLATORY SHAKING MACHINE |
| 09/30205302 DC : 0 | BS EN 4687 - AEROSPACE SERIES - PAINTS AND VARNISHES - CHROMATE FREE (NON CORROSION INHIBITING) TWO COMPONENT COLD CURING PRIMER - CHROMAT FREE PRIMER FOR MILITARY APPLICATION |
| 97/708408 DC : DRAFT APR 1997 | PREN 7000-9 - AEROSPACE - NON-METALLIC MATERIALS - RULES FOR THE DRAFTING AND PRESENTATION OF MATERIAL STANDARDS - PART 9: PAINTS AND VARNISHES |
| DIN EN 3840:2007-10 | Aerospace series - Paints and varnishes - Technical specification; German and English version EN 3840:2007 |
| 11/30237910 DC : 0 | BS EN 927-3 - PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD - PART 3: NATURAL WEATHERING TEST |
| ONORM EN 4689 : 2012 | AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENTS COLD CURING POLYURETHANE FINISH - HIGH FLEXIBILITY AND CHEMICAL AGENT RESISTANCE FOR MILITARY APPLICATION |
| 04/30123574 DC : DRAFT OCT 2004 | EN 14879-3 - ORGANIC COATING SYSTEMS AND LININGS FOR PROTECTION OF INDUSTRIAL APPARATUS AND PLANTS AGAINST CORROSION CAUSED BY AGGRESSIVE MEDIA - PART 3: COATINGS ON CONCRETE COMPONENTS |
| UNI EN 4595 : 2013 | AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENT COLD CURING POLYURETHANE FINISH - SUBSONIC EROSION RESISTANCE |
| UNI EN 71-2 : 2014 | SAFETY OF TOYS - PART 2: FLAMMABILITY |
| 17/30371000 DC : 0 | BS EN 4476 - AEROSPACE SERIES - PAINTS AND VARNISHES - COLD CURING INTERMEDIATE COAT |
| 05/30130329 DC : DRAFT JUL 2005 | EN 71-2 - SAFETY OF TOYS - PART 2: FLAMMABILITY |
| BS EN 3840:2007 | Aerospace series. Paints and varnishes. Technical specification |
| PREN 4595 : 200P1 | AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENT COLD CURING POLYURETHANE FINISH - SUBSONIC EROSION RESISTANCE |
| 00/103366 DC : DRAFT APR 2000 | PREN 1504-2 - PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 2: SURFACE PROTECTION SYSTEMS |
| PREN 3840 : 200P2 | AEROSPACE SERIES - PAINTS AND VARNISHES - TECHNICAL SPECIFICATION |
| BS EN 4476:2011 | Aerospace series. Paints and varnishes. Cold curing intermediate coat |
| PREN 2491 : 200P1 | AEROSPACE SERIES - MOLYBDENUM DISULPHIDE DRY LUBRICANTS - COATING METHODS |
| PREN 3847 : 200P2 | AEROSPACE SERIES - PAINTS AND VARNISHES - DETERMINATION OF SEDIMENTATION RATING |
| I.S. EN ISO 4619:2010 | DRIERS FOR PAINTS AND VARNISHES |
| ISO 4619:1998 | Driers for paints and varnishes |
| PREN 927-3 : DRAFT 2011 | PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD - PART 3: NATURAL WEATHERING TEST |
| ISO 8124-2:2014 | Safety of toys — Part 2: Flammability |
| DIN EN ISO 4619:2011-02 | DRIERS FOR PAINTS AND VARNISHES |
| ISO 2834-2:2015 | Graphic technology — Laboratory preparation test prints — Part 2: Liquid printing inks |
| ISO 9514:2005 | Paints and varnishes Determination of the pot life of multicomponent coating systems Preparation and conditioning of samples and guidelines for testing |
| ONORM EN 927-3 : 2012 | PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD - PART 3: NATURAL WEATHERING TEST |
| DIN EN 71-2:2014-07 | Safety of toys - Part 2: Flammability (includes Amendment A1:2014) |
| BS EN 12092:2001 | Adhesives. Determination of viscosity |
| BS EN 2434-005 : 2006 | AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENT COLD CURING POLYURETHANE FINISH - PART 005: HIGH FLEXIBILITY AND CHEMICAL AGENT RESISTANCE FOR MILITARY APPLICATION |
| DIN EN ISO 6744-1:2004-09 | Binders for paints and varnishes - Alkyd resins - Part 1: General methods of test (ISO 6744-1:1999) |
| DIN EN 14879-3:2007-02 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 3: Coatings on concrete components |
| EN 60464-2:2001/A1:2006 | VARNISHES USED FOR ELECTRICAL INSULATION - PART 2: METHODS OF TEST |
| DIN EN ISO 9514:2005-07 | PAINTS AND VARNISHES - DETERMINATION OF THE POT LIFE OF MULTICOMPONENT COATING SYSTEMS - PREPARATION AND CONDITIONING OF SAMPLES AND GUIDELINES FOR TESTING |
| DIN EN 10300:2006-02 | Steel tubes and fittings for onshore and offshore pipelines - Bituminous hot applied materials for external coating |
| EN 60455-2:2015 | Resin based reactive compounds used for electrical insulation - Part 2: Methods of test |
| UNE-EN 71-2:2011 | Safety of toys - Part 2: Flammability |
$118.72
Including GST where applicable
AUD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - French
PDF 1 User - French
PDF 3 Users - French
PDF 5 Users - French
PDF 9 Users - French
Hardcopy - English
PDF 1 User - English
PDF 3 Users - English
PDF 5 Users - English
PDF 9 Users - English
Hardcopy - French
PDF 1 User - French
Hardcopy - English
PDF 1 User - English
Hardcopy - French
PDF 1 User - French
PDF 3 Users - French
PDF 5 Users - French
PDF 9 Users - French
Hardcopy - English
PDF 1 User - English
PDF 3 Users - English
PDF 5 Users - English
PDF 9 Users - English
Hardcopy - French
PDF 1 User - French
Hardcopy - English
PDF 1 User - English
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.