ISO 2692:2014
Withdrawn
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
View Superseded by
withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
Geometrical product specifications (GPS) Geometrical tolerancing Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR)
Available format(s)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
Withdrawn date
16-07-2021
Language(s)
English, French
Published date
15-12-2014
ISO 2692:2014 defines the maximum material requirement, the least material requirement and the reciprocity requirement. These requirements can only be applied to features of size.
These requirements are used to control specific functions of workpieces where size and geometry are interdependent, e.g. to fulfil the functions "assembly of parts" (for maximum material requirement) or "minimum wall thickness" (for least material requirement). However, the maximum material requirement and least material requirement are also used to fulfil other functional design requirements.
Considering this interdependence between size and geometry, the principle of independency defined in ISO 8015 does not apply when the maximum material requirement, least material requirement, or reciprocity requirement, are used.
| DevelopmentNote |
Supersedes ISO 1101-2 (04/2001) Supersedes ISO/DIS 2692. (12/2014)
|
| DocumentType |
Standard
|
| Pages |
46
|
| PublisherName |
International Organization for Standardization
|
| Status |
Withdrawn
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| SS-EN ISO 2692:2014 | Identical |
| UNE-EN ISO 2692:2014 | Identical |
| NBN EN ISO 2692 : 2015 | Identical |
| NEN EN ISO 2692 : 2015 | Identical |
| NS EN ISO 2692 : 2014 | Identical |
| I.S. EN ISO 2692:2014 | Identical |
| PN EN ISO 2692 : 2015 | Identical |
| SN EN ISO 2692 : 2015 | Identical |
| UNI EN ISO 2692 : 2007 | Identical |
| IS 8000 : Part 2 : 2019 | Identical |
| UNE-EN ISO 2692:2015 | Identical |
| BS EN ISO 2692:2014 | Identical |
| EN ISO 2692:2014 | Identical |
| NF EN ISO 2692 : 2015 | Identical |
| DIN EN ISO 2692:2015-12 | Identical |
| ONORM EN ISO 2692 : 2015 | Identical |
| DIN ISO 2692:1990-05 | Identical |
| SANS 10111-2-3 : 2ED 2008 | Identical |
| NEN ISO 2692 : 1990 AMD 1 1998 | Identical |
| BS 308-3:1990 | Similar to |
| BS ISO 2692:1988 | Identical |
| NFE 04 555 : 1992 | Identical |
| UNE 1121-2:1995 | Identical |
| NS ISO 2692 : 1ED 1993 | Identical |
| I.S. EN ISO 286-2:2010 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ISO CODE SYSTEM FOR TOLERANCES ON LINEAR SIZES - PART 2: TABLES OF STANDARD TOLERANCE CLASSES AND LIMIT DEVIATIONS FOR HOLES AND SHAFTS (ISO 286-2:2010) |
| DIN EN ISO 10579:2013-11 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONING AND TOLERANCING - NON-RIGID PARTS (ISO 10579:2010 INCLUDING COR 1:2011) |
| DIN EN ISO 10135:2010-02 | Geometrical product specifications (GPS) - Drawing indications for moulded parts in technical product documentation (TPD) (ISO 10135:2007) |
| BS ISO 8015:1985 | Technical drawings. Fundamental tolerancing principle |
| BS EN 60191-3:2000 | Mechanical standardization of semiconductor devices General rules for the preparation of outline drawings of integrated circuits |
| I.S. EN ISO 10579:2013 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONING AND TOLERANCING - NON-RIGID PARTS (ISO 10579:2010 INCLUDING COR 1:2011) |
| DIN ISO 10230:2016-07 | Cycles - Splined hub and sprocket - Mating dimensions (ISO 10230:1990) |
| DIN ISO 5459:1982-01 | TECHNICAL DRAWINGS; GEOMETRICAL TOLERANCING; DATUMS AND DATUM SYSTEMS FOR GEOMETRICAL TOLERANCES |
| BS ISO 10135:1994 | Technical drawings. Simplified representation of moulded, cast and forged parts |
| BS A 294:1984 | Specification for spline drive wrenching configuration. Metric series |
| BS ISO 1101:1983 | Technical drawings. Geometrical tolerancing. Tolerancing of form, orientation, location and run-out. Generalities, definitions, symbols, indications on drawings |
| I.S. EN ISO 14638:2015 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - MATRIX MODEL (ISO 14638:2015) |
| I.S. EN 60191-6:2009 | MECHANICAL STANDARDIZATION OF SEMICONDUCTOR DEVICES - PART 6: GENERAL RULES FOR THE PREPARATION OF OUTLINE DRAWINGS OF SURFACE MOUNTED SEMICONDUCTOR DEVICE PACKAGES |
| DIN 41612-6:1990-06 | TWO-PART CONNECTORS FOR PRINTED BOARD; GRID 2,54 MM; DIMENSIONS OF TYPES Q, R AND S |
| I.S. EN ISO 10135:2009 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DRAWING INDICATIONS FOR MOULDED PARTS IN TECHNICAL PRODUCT DOCUMENTATION (TPD) |
| UNE-EN ISO 286-2:2011 | Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts (ISO 286-2:2010) |
| I.S. EN ISO 14405-2:2011 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL TOLERANCING - PART 2: DIMENSIONS OTHER THAN LINEAR SIZES (ISO 14405-2:2011) |
| UNI EN ISO 22432 : 2012 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FEATURES UTILIZED IN SPECIFICATION AND VERIFICATION |
| ISO 14978:2006 | Geometrical product specifications (GPS) General concepts and requirements for GPS measuring equipment |
| UNE-EN ISO 14405-2:2015 | Geometrical product specifications (GPS) - Dimensional tolerancing - Part 2: Dimensions other than linear sizes (ISO 14405-2:2011) |
| ISO 10579:2010 | Geometrical product specifications (GPS) Dimensioning and tolerancing Non-rigid parts |
| BS EN ISO 4759-3:2000 | Tolerances for fasteners Plain washers for bolts, screws and nuts. Product grades A and C |
| EN ISO 14638:2015 | Geometrical product specifications (GPS) - Matrix model (ISO 14638:2015) |
| DIN EN ISO 1101:2017-09 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL TOLERANCING - TOLERANCES OF FORM, ORIENTATION, LOCATION AND RUN-OUT (ISO 1101:2017) |
| DIN SPEC 91184 E : 2014 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 2: RULES (ISO/TS 8062-2:2013) |
| BS EN ISO 10135:2009 | Geometrical product specifications (GPS). Drawing indications for moulded parts in technical product documentation (TPD) |
| BS ISO 2698:2016 | Diesel engines. Clamp-mounted fuel injectors, types 7 and 28 |
| DIN EN ISO 5458:2016-08 (Draft) | GEOMETRICAL PRODUCT SPECIFICATION (GPS) - GEOMETRICAL TOLERANCING - POSITIONAL TOLERANCING |
| BS 2A 296:1995 | Bolts and screws, metric. Tolerances of form and position |
| DIN CEN ISO/TS 8062-2;DIN SPEC 91184:2014-03 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 2: RULES (ISO/TS 8062-2:2013) |
| ISO 10303-238:2007 | Industrial automation systems and integration Product data representation and exchange Part 238: Application protocol: Application interpreted model for computerized numerical controllers |
| DIN EN ISO 8015:2011-09 | Geometrical product specifications (GPS) - Fundamentals - Concepts, principles and rules (ISO 8015:2011) |
| 15/30328996 DC : 0 | BS ISO 2698 - DIESEL ENGINES - CLAMP-MOUNTED FUEL INJECTORS, TYPES 7 AND 28 |
| BS ISO 8062-4:2017 | Geometrical product specifications (GPS). Dimensional and geometrical tolerances for moulded parts General tolerances for castings using profile tolerancing in a general datum system |
| PD CEN ISO/TS 8062-2:2013 | Geometrical Product Specifications (GPS). Dimensional and geometrical tolerances for moulded parts Rules |
| BS 4500-1.2(1990) : AMD 7631 | ISO LIMITS AND FITS - GENERAL, TOLERANCES AND DEVIATIONS - TABLES OF COMMONLY USED TOLERANCE GRADES AND LIMIT DEVIATIONS FOR HOLES AND SHAFTS |
| DIN ISO 4379:1995-10 | PLAIN BEARINGS - COPPER ALLOY BUSHES |
| CEI EN 61754-1 : 2014 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CONNECTOR INTERFACES - PART 1: GENERAL AND GUIDANCE |
| 15/30295117 DC : 0 | BS EN ISO 5458 - GEOMENTRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL TOLERANCING - POSITIONAL AND PATTERN TOLERANCING |
| DIN EN ISO 22432:2012-03 | Geometrical product specifications (GPS) - Features utilized in specification and verification (ISO 22432:2011) |
| DIN CEN ISO/TS 8062-2; DIN SPEC 91184:2014-03 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 2: RULES (ISO/TS 8062-2:2013) |
| NF ISO 8015 : 2006 | TECHNICAL DRAWINGS - FUNDAMENTAL TOLERANCING PRINCIPLE |
| BS 2M 63:1993 | Specification for dimensions of aerospace fluid system port connection, seal and fitting end |
| 14/30262683 DC : 0 | BS ISO 8062-4 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 4: GENERAL TOLERANCES FOR CASTINGS USING PROFILE TOLERANCING IN A GENERAL DATUM SYSTEM |
| BS EN ISO 286-2:2010 | Geometrical product specifications (GPS). ISO code system for tolerances on linear sizes Tables of standard tolerance classes and limit deviations for holes and shafts |
| UNI EN ISO 10135 : 2009 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DRAWING INDICATIONS FOR MOULDED PARTS IN TECHNICAL PRODUCT DOCUMENTATION (TPD) |
| UNI ISO 10579 : 1995 | TECHNICAL DRAWINGS - DIMENSIONS AND TOLERANCING - NON-RIGID-PARTS |
| UNE-EN ISO 286-1:2011 | Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 1: Basis of tolerances, deviations and fits (ISO 286-1:2010) |
| BS EN ISO 14405-2:2011 | Geometrical product specifications (GPS). Dimensional tolerancing Dimensions other than linear sizes |
| BS EN ISO 5458:1999 | Geometrical product specifications (GPS). Geometrical tolerancing. Positional tolerancing |
| ISO 10303-214:2010 | Industrial automation systems and integration Product data representation and exchange Part 214: Application protocol: Core data for automotive mechanical design processes |
| EN ISO 14405-2:2011 | Geometrical product specifications (GPS) - Dimensional tolerancing - Part 2: Dimensions other than linear sizes (ISO 14405-2:2011) |
| DIN EN ISO 14405-2:2012-03 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL TOLERANCING - PART 2: DIMENSIONS OTHER THAN LINEAR SIZES (ISO 14405-2:2011) |
| ISO 26303:2012 | Machine tools Short-term capability evaluation of machining processes on metal-cutting machine tools |
| UNI EN ISO 14978 : 2006 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS AND REQUIREMENTS FOR GPS MEASURING EQUIPMENT |
| I.S. EN ISO 4759-3:2016 | TOLERANCES FOR FASTENERS - PART 3: WASHERS FOR BOLTS, SCREWS AND NUTS - PRODUCT GRADES A, C AND F (ISO 4759-3:2016) |
| DIN ISO 16792:2008-12 | TECHNICAL PRODUCT DOCUMENTATION - DIGITAL PRODUCT DEFINITION DATA PRACTICES |
| I.S. EN ISO 10303-210:2002 | INDUSTRIAL AUTOMATION SYSTEMS AND INTEGRATION - PRODUCT DATA REPRESENTATION AND EXCHANGE - PART 210: APPLICATION PROTOCOL: ELECTRONIC ASSEMBLY, INTERCONNECTION, AND PACKAGING DESIGN |
| I.S. EN ISO 1101:2017 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL TOLERANCING - TOLERANCES OF FORM, ORIENTATION, LOCATION AND RUN-OUT (ISO 1101:2017) |
| I.S. EN ISO 1660:2017 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL TOLERANCING - PROFILE TOLERANCING (ISO 1660:2017) |
| DIN ISO 2699:2002-02 | DIESEL ENGINES - FLANGE-MOUNTED FUEL INJECTORS, SIZE "S" - TYPES 2, 3, 4, 5 AND 6 |
| BS 308-1:1984 | Engineering drawing practice Recommendations for general principles |
| BS 308-3:1990 | Engineering drawing practice Recommendations for geometrical tolerancing |
| BS 308-2:1985 | Engineering drawing practice Recommendations for dimensioning and tolerancing of size |
| BS 6322-3:1992 | Tolerances for fasteners Specification for tolerances of plain washers for bolts, screws and nuts with nominal thread diameters from 1 mm up to and including 150 mm. Product grades A and C |
| BS 4480-3:1993 | Plain bearings: metric series Copper alloy bushes |
| EN ISO 5458 : 1998 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL TOLERANCING - POSITIONAL TOLERANCING (ISO 5458:1998) |
| 12/30259955 DC : 0 | BS EN 61754-1 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CONNECTOR INTERFACES - PART 1: GENERAL AND GUIDANCE |
| BS EN ISO 10579:2013 | Geometrical product specifications (GPS). Dimensioning and tolerancing. Non-rigid parts |
| 14/30280974 DC : 0 | BS EN ISO 4759-3 - TOLERANCES FOR FASTENERS - PART 3: WASHERS FOR BOLTS, SCREWS AND NUTS - PRODUCT GRADES A, C AND F |
| BS ISO 8788:2000 | Aerospace. Nuts, metric. Tolerances of form and position |
| DIN ISO 7913:1986-05 | AEROSPACE - FASTENERS, TOLERANCES OF FORM AND POSITION FOR BOLTS AND SCREWS |
| DIN EN ISO 14638 E : 2015 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - MATRIX MODEL (ISO 14638:2015) |
| BS ISO 26303:2012 | Machine tools — Short-term capability evaluation of machining processes on metal-cutting machine tools |
| BS ISO 10303-47:1997 | Industrial automation systems and integration. Product data representation and exchange Integrated generic resource. Shape variation tolerances |
| UNI EN ISO 286-1 : 2010 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ISO CODE SYSTEM FOR TOLERANCES ON LINEAR SIZES - PART 1: BASIS OF TOLERANCES, DEVIATIONS AND FITS |
| BS ISO 5459:1981 | Technical drawings. Geometrical tolerancing. Datums and datum-systems for geometrical tolerances |
| BS 3934-3:1992 | Mechanical standardization of semiconductor devices Recommendations for the preparation of outline drawings of integrated circuits |
| DIN EN ISO 1660 E : 2017 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL TOLERANCING - PROFILE TOLERANCING (ISO 1660:2017) |
| I.S. EN ISO 5459:2011 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL TOLERANCING - DATUMS AND DATUM SYSTEMS |
| S.R. CEN ISO/TS 8062-2:2013 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 2: RULES (ISO/TS 8062-2:2013, CORRECTED VERSION 2013-11-01) |
| I.S. EN ISO 8015:2011 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FUNDAMENTALS - CONCEPTS, PRINCIPLES AND RULES |
| UNI EN ISO 14405-2 : 2012 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL TOLERANCING - PART 2: DIMENSIONS OTHER THAN LINEAR SIZES |
| UNE-EN ISO 8015:2012 | Geometrical product specifications (GPS) - Fundamentals - Concepts, principles and rules (ISO 8015:2011) |
| I.S. EN ISO 14978:2006 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS AND REQUIREMENTS FOR GPS MEASURING EQUIPMENT |
| ISO 286-1:2010 | Geometrical product specifications (GPS) ISO code system for tolerances on linear sizes Part 1: Basis of tolerances, deviations and fits |
| ISO 14405-2:2011 | Geometrical product specifications (GPS) Dimensional tolerancing Part 2: Dimensions other than linear sizes |
| UNI EN ISO 10579 : 2013 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONING AND TOLERANCING - NON-RIGID PARTS |
| UNI EN ISO 5459 : 2011 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL TOLERANCING - DATUMS AND DATUM SYSTEMS |
| ISO/TR 5460:1985 | Technical drawings Geometrical tolerancing Tolerancing of form, orientation, location and run-out Verification principles and methods Guidelines |
| ISO 8788:2000 | Aerospace Nuts, metric Tolerances of form and position |
| ISO 5458:1998 | Geometrical Product Specifications (GPS) Geometrical tolerancing Positional tolerancing |
| ISO 4379:1993 | Plain bearings Copper alloy bushes |
| ISO 7913:1994 | Aerospace Bolts and screws, metric Tolerances of form and position |
| DIN EN ISO 14978:2006-09 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS AND REQUIREMENTS FOR GPS MEASURING EQUIPMENT |
| ISO 10135:2007 | Geometrical product specifications (GPS) — Drawing indications for moulded parts in technical product documentation (TPD) |
| IEC 61754-1:2013 | Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 1: General and guidance |
| UNE-ISO 26303:2013 | Machine tools -- Short-term capability evaluation of machining processes on metal-cutting machine tools |
| EN ISO 14978:2006/AC:2008 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS AND REQUIREMENTS FOR GPS MEASURING EQUIPMENT |
| EN ISO 4759-1 : 2000 | TOLERANCES FOR FASTENERS - PART 1: BOLTS, SCREWS, STUDS AND NUTS - PRODUCT GRADES A, B AND C |
| UNI EN 20286-1 : 1995 | ISO SYSTEM OF LIMITS AND FITS - BASES OF TOLERANCES, DEVIATIONS AND FITS |
| BS EN ISO 286-1:2010 | Geometrical product specifications (GPS). ISO code system for tolerances on linear sizes Basis of tolerances, deviations and fits |
| 13/30284676 DC : 0 | BS EN ISO 1660 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL TOLERANCING - PROFILE TOLERANCING |
| DIN EN ISO 10579 E : 2013 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONING AND TOLERANCING - NON-RIGID PARTS (ISO 10579:2010 INCLUDING COR 1:2011) |
| DIN ISO 286-2:1990-11 | ISO SYSTEM OF LIMITS AND FITS - TABLES OF STANDARD TOLERANCE GRADES AND LIMIT DEVIATIONS FOR HOLES AND SHAFTS |
| BIS IS 800 : 2007 AMD 1 2012 | GENERAL CONSTRUCTION IN STEEL - CODE OF PRACTICE |
| DIN EN ISO 14638:2015-12 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - MATRIX MODEL (ISO 14638:2015) |
| DIN ISO 10230 E : 2016 | CYCLES - SPLINED HUB AND SPROCKET - MATING DIMENSIONS (ISO 10230:1990) |
| UNI CEN ISO/TS 8062-2 : 2013 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 2: RULES |
| BS EN ISO 8015:2011 | Geometrical product specifications (GPS). Fundamentals. Concepts, principles and rules |
| 16/30314605 DC : DRAFT MAR 2016 | BS EN ISO 5459 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL TOLERANCING - DATUMS AND DATUM SYSTEMS |
| I.S. EN ISO 286-1:2010/AC:2013 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ISO CODE SYSTEM FOR TOLERANCES ON LINEAR SIZES - PART 1: BASIS OF TOLERANCES, DEVIATIONS AND FITS (ISO 286-1:2010) |
| DIN ISO 1101:1985-03 | TECHNICAL DRAWINGS, GEOMETRICAL TOLERANCING, TOLERANCES OF FORM, ORIENTATION, LOCATION AND RUNOUT - GENERALITIES, DEFINITIONS, SYMBOLS ON DRAWINGS |
| BS EN ISO 22432:2011 | Geometrical product specifications (GPS). Features utilized in specification and verification |
| BS EN ISO 14638:2015 | Geometrical product specifications (GPS). Matrix model |
| UNI EN ISO 286-2 : 2010 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ISO CODE SYSTEM FOR TOLERANCES ON LINEAR SIZES - PART 2: TABLES OF STANDARD TOLERANCE CLASSES AND LIMIT DEVIATIONS FOR HOLES AND SHAFTS |
| NF EN ISO 5459 : 2011 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL TOLERANCING - DATUMS AND DATUM-SYSTEMS |
| 08/30163094 DC : DRAFT FEB 2008 | BS EN ISO 286-2 AMD1 - ISO SYSTEM OF LIMITS AND FITS - PART 2: TABLES OF STANDARD TOLERANCE GRADES AND LIMIT DEVIATIONS FOR HOLES AND SHAFTS |
| BS EN 60191-6:2009 | Mechanical standardization of semiconductor devices General rules for the preparation of outline drawings of surface mounted semiconductor device packages |
| DIN ISO 286-1:1990-11 | ISO SYSTEM OF LIMITS AND FITS - BASES OF TOLERANCES, DEVIATIONS AND FITS |
| UNE-EN ISO 10579:2015 | Geometrical product specifications (GPS) - Dimensioning and tolerancing - Non-rigid parts (ISO 10579:2010 including Cor 1:2011) |
| ISO 2698:2016 | Diesel engines Clamp-mounted fuel injectors, types 7 and 28 |
| ISO 8062-4:2017 | Geometrical product specifications (GPS) — Dimensional and geometrical tolerances for moulded parts — Part 4: General tolerances for castings using profile tolerancing in a general datum system |
| DIN EN ISO 286-2:2010-11 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ISO CODE SYSTEM FOR TOLERANCES ON LINEAR SIZES - PART 2: TABLES OF STANDARD TOLERANCE CLASSES AND LIMIT DEVIATIONS FOR HOLES AND SHAFTS |
| CEI EN 60191-6 : 2011 | MECHANICAL STANDARDIZATION OF SEMICONDUCTOR DEVICES - PART 6: GENERAL RULES FOR THE PREPARATION OF OUTLINE DRAWINGS OF SURFACE MOUNTED SEMICONDUCTOR DEVICE PACKAGES |
| ISO 286-2:2010 | Geometrical product specifications (GPS) ISO code system for tolerances on linear sizes Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts |
| IEC 60191-6:2009 | Mechanical standardization of semiconductor devices - Part 6: General rules for the preparation of outline drawings of surface mounted semiconductor device packages |
| ISO 22432:2011 | Geometrical product specifications (GPS) — Features utilized in specification and verification |
| UNE-EN ISO 4759-3:2017 | Tolerances for fasteners - Part 3: Washers for bolts, screws and nuts - Product grades A, C and F (ISO 4759-3:2016) |
| BS EN ISO 1101:2017 | Geometrical product specifications (GPS). Geometrical tolerancing. Tolerances of form, orientation, location and run-out |
| IEC 60191-3:1999 | Mechanical standardization of semiconductor devices - Part 3: General rules for the preparation of outline drawings of integrated circuits |
| ISO 1660:2017 | Geometrical product specifications (GPS) — Geometrical tolerancing — Profile tolerancing |
| ISO 128-1:2003 | Technical drawings General principles of presentation Part 1: Introduction and index |
| ISO 5459:2011 | Geometrical product specifications (GPS) — Geometrical tolerancing — Datums and datum systems |
| ISO 14638:2015 | Geometrical product specifications (GPS) Matrix model |
| ISO 8015:2011 | Geometrical product specifications (GPS) Fundamentals Concepts, principles and rules |
| BS EN ISO 1660:2017 | Geometrical product specifications (GPS). Geometrical tolerancing. Profile tolerancing |
| ISO 4759-1:2000 | Tolerances for fasteners — Part 1: Bolts, screws, studs and nuts — Product grades A, B and C |
| ISO 4759-3:2016 | Tolerances for fasteners Part 3: Washers for bolts, screws and nuts Product grades A, C and F |
| EN 60191-3:1999 | Mechanical standardization of semiconductor devices - Part 3: General rules for the preparation of outline drawings of integrated circuits |
| EN ISO 4759-3:2016 | Tolerances for fasteners - Part 3: Washers for bolts, screws and nuts - Product grades A, C and F (ISO 4759-3:2016) |
| EN ISO 1660:2017 | Geometrical product specifications (GPS) - Geometrical tolerancing - Profile tolerancing (ISO 1660:2017) |
| EN ISO 5459:2011 | Geometrical product specifications (GPS) - Geometrical tolerancing - Datums and datum systems (ISO 5459:2011) |
| EN ISO 1101:2017 | Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out (ISO 1101:2017) |
| EN ISO 8015:2011 | Geometrical product specifications (GPS) - Fundamentals - Concepts, principles and rules (ISO 8015:2011) |
| EN ISO 10579:2013 | Geometrical product specifications (GPS) - Dimensioning and tolerancing - Non-rigid parts (ISO 10579:2010 including Cor 1:2011) |
| EN ISO 286-1:2010/AC:2013 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ISO CODE SYSTEM FOR TOLERANCES ON LINEAR SIZES - PART 1: BASIS OF TOLERANCES, DEVIATIONS AND FITS (ISO 286-1:2010/COR 1:2013) |
| EN ISO 22432:2011 | Geometrical product specifications (GPS) - Features utilized in specification and verification (ISO 22432:2011) |
| EN ISO 286-2:2010/AC:2013 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ISO CODE SYSTEM FOR TOLERANCES ON LINEAR SIZES - PART 2: TABLES OF STANDARD TOLERANCE CLASSES AND LIMIT DEVIATIONS FOR HOLES AND SHAFTS (ISO 286-2:2010/COR 1:2013) |
| EN ISO 10303-210:2002 | Industrial automation systems and integration - Product data representation and exchange - Part 210: Application protocol: Electronic assembly, interconnection, and packaging design (ISO 10303-210:2001) |
| EN ISO 10135:2009 | Geometrical product specifications (GPS) - Drawing indications for moulded parts in technical product documentation (TPD) (ISO 10135:2007) |
| BS ISO 10579 : 2010 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONING AND TOLERANCING - NON-RIGID PARTS |
| BS EN ISO 5459:2011 | Geometrical product specifications (GPS). Geometrical tolerancing. Datums and datum systems |
| 12/30250038 DC : 0 | BS ISO 2698 - DIESEL ENGINES - CLAMP-MOUNTED FUEL INJECTORS, TYPES 7 AND 28 |
| DIN ISO 5458:1988-07 | TECHNICAL DRAWINGS - GEOMETRICAL TOLERANCING - POSITIONAL TOLERANCING |
| UNI EN ISO 8015 : 2011 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FUNDAMENTALS - CONCEPTS, PRINCIPLES AND RULES |
| BS EN 61754-1:2013 | Fibre optic interconnecting devices and passive components. Fibre optic connector interfaces General and guidance |
| 07/30167960 DC : 0 | BS EN 60191-6 - MECHANICAL STANDARDIZATION OF SEMICONDUCTOR DEVICES - PART 6: GENERAL RULES FOR THE PREPARATION OF OUTLINE DRAWINGS OF SURFACE MOUNTED SEMICONDUCTOR DEVICE PACKAGES |
| DIN CEN ISO/TS 8062-2;DIN SPEC 91184:2014-03 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 2: RULES (ISO/TS 8062-2:2013) |
| I.S. EN ISO 22432:2011 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FEATURES UTILIZED IN SPECIFICATION AND VERIFICATION (ISO 22432:2011) |
| I.S. EN ISO 5458:1999 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL TOLERANCING - POSITIONAL TOLERANCING |
| BS EN ISO 14978:2006 | Geometrical Product Specifications (GPS). General concepts and requirements for GPS measuring equipment |
| I.S. EN 61754-1:2013 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CONNECTOR INTERFACES - PART 1: GENERAL AND GUIDANCE |
| CEN ISO/TS 8062-2 : 2013 COR 2014 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 2: RULES (ISO/TS 8062-2:2013, CORRECTED VERSION 2013-11-01) |
| DIN EN ISO 4759-1 E : 2001 | TOLERANCES FOR FASTENERS - PART 1: BOLTS, SCREWS, STUDS AND NUTS - PRODUCT GRADES A, B AND C |
| BS EN ISO 4759-1:2001 | Tolerances for fasteners Bolts, screws, studs and nuts. Product grades A, B and C |
| ISO 1101:2017 | Geometrical product specifications (GPS) — Geometrical tolerancing — Tolerances of form, orientation, location and run-out |
| ISO/TS 8062-2:2013 | Geometrical product specifications (GPS) — Dimensional and geometrical tolerances for moulded parts — Part 2: Rules |
| BS EN 20286-2:1993 | ISO system of limits and fits ISO system of limits and fits. Tables of standard tolerance grades and limit deviations for holes and shafts |
| EN 60191-6:2009 | Mechanical standardization of semiconductor devices - Part 6: General rules for the preparation of outline drawings of surface mounted semiconductor device packages |
| EN 61754-1:2013 | Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 1: General and guidance |
| ISO/TR 14638:1995 | Geometrical product specification (GPS) Masterplan |
| ISO 8015:2011 | Geometrical product specifications (GPS) Fundamentals Concepts, principles and rules |
| ISO 5459:2011 | Geometrical product specifications (GPS) — Geometrical tolerancing — Datums and datum systems |
| ISO 1101:2017 | Geometrical product specifications (GPS) — Geometrical tolerancing — Tolerances of form, orientation, location and run-out |
| ISO 7083:1983 | TECHNICAL DRAWINGS - SYMBOLS FOR GEOMETRICAL TOLERANCING - PROPORTIONS AND DIMENSIONS |
| ISO 14253-1:2017 | Geometrical product specifications (GPS) — Inspection by measurement of workpieces and measuring equipment — Part 1: Decision rules for verifying conformity or nonconformity with specifications |
| ISO 17450-1:2011 | Geometrical product specifications (GPS) — General concepts — Part 1: Model for geometrical specification and verification |
| ISO 286-1:2010 | Geometrical product specifications (GPS) ISO code system for tolerances on linear sizes Part 1: Basis of tolerances, deviations and fits |
| ISO 14660-2:1999 | Geometrical Product Specifications (GPS) Geometrical features Part 2: Extracted median line of a cylinder and a cone, extracted median surface, local size of an extracted feature |
| ISO 22432:2011 | Geometrical product specifications (GPS) — Features utilized in specification and verification |
| ISO 14405-1:2016 | Geometrical product specifications (GPS) — Dimensional tolerancing — Part 1: Linear sizes |
| ISO 5458:1998 | Geometrical Product Specifications (GPS) Geometrical tolerancing Positional tolerancing |
$118.72
Including GST where applicable
AUD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - English
PDF 1 User - English
PDF 3 Users - English
PDF 5 Users - English
PDF 9 Users - English
Hardcopy - French
PDF 1 User - French
PDF 3 Users - French
PDF 5 Users - French
PDF 9 Users - French
Hardcopy - English
PDF 1 User - English
PDF 3 Users - English
PDF 5 Users - English
PDF 9 Users - English
Hardcopy - French
PDF 1 User - French
PDF 3 Users - French
PDF 5 Users - French
PDF 9 Users - French
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.