ISO 3601-1:2012
Current
Current
The latest, up-to-date edition.
Fluid power systems — O-rings — Part 1: Inside diameters, cross-sections, tolerances and designation codes
Amended by
Available format(s)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
Published date
24-02-2012
ISO 3601-1:2012 specifies the inside diameters, cross-sections, tolerances and designation codes for O-rings used in fluid power systems for general industrial and aerospace applications.
The dimensions and tolerances specified in ISO 3601-1:2012 are suitable for any elastomeric material, provided that suitable tooling is available.
| DevelopmentNote |
NEW CHILD AMD 1 2019 IS ADDED.
|
| DocumentType |
Standard
|
| Pages |
36
|
| ProductNote |
NEW CHILD AMD 1 2019 IS ADDED.
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| BS ISO 3601-1:2012 | Identical |
| DIN ISO 3601-1:2013-11 | Identical |
| NEN ISO 3601-1 : 2012 C1 2012 | Identical |
| NF ISO 3601-1 : 2012 | Identical |
| NFT 47-502 : 1996 | Similar to |
| NFT 47 501-2 : 1995 | Similar to |
| UNI ISO 3601-1 : 2005 | Identical |
| NFT 47 501-1 : 1995 | Similar to |
| DIN 3771-1:1984-12 | Corresponds |
| NFF 11 051 : 1990 | Similar to |
| UNI 9211 : 1988 | Similar to |
| API SPEC 11D1 : 2015 | PACKERS AND BRIDGE PLUGS |
| I.S. EN ISO 12209:2013 | GAS CYLINDERS - OUTLET CONNECTIONS FOR GAS CYLINDER VALVES FOR COMPRESSED BREATHABLE AIR (ISO 12209:2013) |
| ISO 3601-4:2008 | Fluid power systems — O-rings — Part 4: Anti-extrusion rings (back-up rings) |
| 98/706004 DC : DRAFT APR 1998 | ISO/CD 3601-6 - FLUID SYSTEMS - SEALING DEVICES - O-RINGS - PART 6: RECOMMENDED ELASTOMERIC MATERIALS |
| ISO 23748:2016 | Aerospace series — O-ring grooves — Dimensions |
| API 11D3 :2008 | PROGRESSING CAVITY PUMP SYSTEMS FOR ARTIFICIAL LIFT - SURFACE-DRIVE SYSTEMS |
| 10/30199074 DC : 0 | BS ISO 6162-1 - HYDRAULIC FLUID POWER - FLANGE CONNECTORS WITH SPLIT OR ONE-PIECE FLANGE CLAMPS AND METRIC OR INCH SCREWS - PART 1: FLANGE CONNECTORS FOR USE AT PRESSURES OF 3,5 MPA (35 BAR) TO 35 MPA (350 BAR), DN 13 TO DN 127 |
| 16/30328245 DC : 0 | BS ISO 6164 - HYDRAULIC FLUID POWER - FOUR-SCREW, ONE-PIECE SQUARE FLANGE CONNECTIONS FOR USE AT PRESSURES OF 42 MPA, DN 10 TO 80 |
| BS EN ISO 14998:2013 | Petroleum and natural gas industries. Downhole equipment. Completion accessories |
| SAE AS 6058 : 2016 | PACKING, PREFORMED, O-RING MOLDED FROM PERFLUOROETHER, FFO MATERIAL |
| ISO 3601-3:2005 | Fluid power systems O-rings Part 3: Quality acceptance criteria |
| BS ISO 12334:2000 | Aerospace. Hydraulic, pressure-compensated, variable delivery pumps. General requirements for 35000 kPa systems |
| SAE J 2551/3 : 2013 | RECOMMENDED PRACTICES FOR FLUID CONDUCTOR CARBON, ALLOY AND HIGH STRENGTH LOW ALLOY STEEL TUBING APPLICATIONS - PART 3: PROCUREMENT |
| 17/30332783 DC : 0 | BS ISO 5145 - GAS CYLINDERS - CYLINDER VALVE OUTLETS FOR GASES AND GAS MIXTURES - SELECTION AND DIMENSIONING |
| NF ISO 3384 : 2006 | RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF STRESS RELAXATION IN COMPRESSION AT AMBIENT AND AT ELEVATED TEMPERATURES |
| 13/30280221 DC : 0 | BS ISO 8278 - AEROSPACE - HYDRAULIC, PRESSURE COMPENSATED, VARIABLE DELIVERY PUMPS - GENERAL REQUIREMENTS |
| 96/716553 DC : DRAFT NOV 1996 | TR 4271 AEROSPACE SERIES - O-RINGS GROOVES - DESIGN CRITERIA FOR O-RING GROOVES - BASIC CALCULATIONS |
| 07/30144376 DC : 0 | BS ISO 3601-4 - FLUID POWER SYSTEMS - O-RINGS - PART 4: ANTI-EXTRUSION RINGS (BACK-UP RINGS) |
| 96/709825 DC : DRAFT JUL 1996 | ISO/CD 6164-2 - HYDRAULIC FLUID POWER - ONE-PIECE SQUARE-FLANGE CONNECTORS - PART 2: FOUR-SCREW SQUARE-FLANGE CONNECTORS FOR USE AT PRESSURES OF 31,5 MPA (315 BAR) TO 40 MPA (400 BAR), DN 10 TO DN 80 |
| BS 3156-11.2.3:1986 | Analysis of fuel gases. Methods for non-manufactured gases. Determination of potential hydrocarbon liquid content Volumetric method |
| CSA C22.2 No. 60079.0 : 2015 | EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS |
| UNI EN ISO 23936-2 : 2012 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - NONMETALLIC MATERIALS IN CONTACT WITH MEDIA RELATED TO OIL AND GAS PRODUCTION - PART 2: ELASTOMERS |
| API SPEC 14L : 2007 | SPECIFICATION FOR LOCK MANDRELS AND LANDING NIPPLES |
| ISO 12333:2000 | Aerospace Constant displacement hydraulic motors General specifications for 35 000 kPa systems |
| PREN 3746 : 200P1 | AEROSPACE SERIES - O-RINGS, IN FLUOROSILICONE RUBBER (FVMQ) - HARDNESS 80 IRHD |
| PREN 3663 : 200P1 | AEROSPACE SERIES - PIPE COUPLING - O-RINGS IN ACRYLONITRILE-BUTADIENE ELASTOMER (NBR), 75 IRHD, TEMPERATURE RANGE: -55 DEGREES C TO 135 DEGREES C |
| STANAG 3323 : 0 | PIPE (TUBE) CONNECTIONS TO AIRCRAFT INSTRUMENTS (IMPERIAL AND METRIC) |
| API 14A : 2015 | SPECIFICATION FOR SUBSURFACE SAFETY VALVE EQUIPMENT |
| SAE AS 28772 : 2015 | 'D' RING SEAL FOR SHOCK STRUTS MOLDED FROM AMS-P-25732 MATERIAL |
| SAE AS 83461/2 : 2016 | STRAIGHT THREAD TUBE FITTING BOSS O-RING MOLDED FROM AMS-P-83461 RUBBER |
| ISO 8399-2:1998 | Aerospace — Accessory drives and mounting flanges (Metric series) — Part 2: Dimensions |
| SAE AS 83485 : 2016 | O-RING MOLDED FROM AMS7287 MATERIAL |
| NF ISO 6164 : 2004 | HYDRAULIC FLUID POWER - FOUR-SCREW, ONE-PIECE SQUARE-FLANGE CONNECTIONS FOR USE AT PRESSURES OF 25 MPA AND 40 MPA (250 BAR AND 400 BAR) |
| API 14L CHINESE : 2007 | SPECIFICATION FOR LOCK MANDRELS AND LANDING NIPPLES |
| EN 15202:2012 | LPG equipment and accessories - Essential operational dimensions for LPG cylinder valve outlet and associated equipment connections |
| I.S. EN 15202:2012 | LPG EQUIPMENT AND ACCESSORIES - ESSENTIAL OPERATIONAL DIMENSIONS FOR LPG CYLINDER VALVE OUTLET AND ASSOCIATED EQUIPMENT CONNECTIONS |
| BS EN ISO 14310:2008 | Petroleum and natural gas industries. Downhole equipment. Packers and bridge plugs |
| BS EN 15202:2012 | LPG equipment and accessories. Essential operational dimensions for LPG cylinder valve outlet and associated equipment connections |
| NBR IEC 60079-0 : 2013 ERRATA 2 2016 | EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS |
| DIN ISO 3601-2:2010-08 | Fluid power systems - O-rings - Part 2: Housing dimensions for general applications (ISO 3601-2:2008) |
| BS ISO 9206:2016 | Aerospace series. Constant displacement hydraulic motors. General specifications |
| DIN EN 61518:2002-06 | MATING DIMENSIONS BETWEEN DIFFERENTIAL PRESSURE (TYPE) MEASURING INSTRUMENTS AND FLANGED-ON SHUT-OFF DEVICES UP TO 413 BAR (41,3 MPA) |
| SAE J 2337-3 : 2017 | CONNECTIONS FOR FLUID POWER AND HIGH PRESSURE USE - PORTS, STUD ENDS, AND PLUGS WITH ISO 261 THREADS AND O-RING SEALING - PART 3: PORT PLUG REQUIREMENTS, DIMENSIONS, DESIGN, AND TEST METHODS |
| BS ISO 3601-5:2015 | Fluid power systems. O-rings Specification of elastomeric materials for industrial applications |
| BS ISO 8278:2016 | Aerospace series. Hydraulic, pressure compensated, variable delivery pumps. General requirements |
| PREN 681-1 : DRAFT 2016 | ELASTOMERIC SEALS - MATERIAL REQUIREMENTS FOR PIPE JOINT SEALS USED IN WATER AND DRAINAGE APPLICATIONS - PART 1: VULCANIZED RUBBER |
| 17/30362705 DC : 0 | BS EN 15202 - LPG EQUIPMENT AND ACCESSORIES - ESSENTIAL OPERATIONAL DIMENSIONS FOR LPG CYLINDER VALVE OUTLET AND ASSOCIATED EQUIPMENT CONNECTIONS |
| 11/30238890 DC : 0 | BS EN ISO 14998 - PETROLEUM AND NATURAL GAS INDUSTRIES - DOWN HOLE EQUIPMENT - COMPLETION ACCESSORIES |
| SAE AS 27196 : 2014 | SEAL, BONDED, 302 CORROSION RESISTANT STEEL, AMS5516, MOLD IN GROOVE, FLUOROCARBON RUBBER, AMS7276 |
| 11/30232899 DC : 0 | BS ISO 6162-2 - HYDRAULIC FLUID POWER - FLANGE CONNECTIONS WITH SPLIT OR ONE-PIECE FLANGE CLAMPS AND METRIC OR INCH SCREWS - PART 2: FLANGE CONNECTORS, PORTS AND MOUNTING SURFACES FOR USE AT A PRESSURE OF 42 MPA (420 BAR), DN 13 TO DN 76 |
| 11/30231429 DC : 0 | BS ISO 3384-2 - RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF STRESS RELAXATION IN COMPRESSION - PART 2: WITH TEMPERATURE CYCLING |
| UNE-ISO 3384-1:2017 | Rubber, vulcanize or thermoplastic. Determination of stress relaxation in compression. Part 1: Testing at constant temperature |
| SAE MA 2010 : 2012 | PACKING, PREFORMED - O-RING SEAL, STANDARD SIZES & SIZE CODES, METRIC |
| 07/30144373 DC : 0 | BS ISO 3601-2 - FLUID POWER SYSTEMS - O-RINGS - PART 2: HOUSING DIMENSIONS FOR GENERAL APPLICATIONS |
| BS 2M 63:1993 | Specification for dimensions of aerospace fluid system port connection, seal and fitting end |
| API 11D1 REDLINE : 2009 | PACKERS AND BRIDGE PLUGS |
| API SPEC 19TT : 2016 | SPECIFICATION FOR DOWNHOLE WELL TEST TOOLS AND RELATED EQUIPMENT |
| BS EN 60079-0 : 2012 | EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS |
| BS EN ISO 17078-3:2009 | Petroleum and natural gas industries. Drilling and production equipment Running tools, pulling tools and kick-over tools and latches for side-pocket mandrels |
| ISO 3384-1:2011 | Rubber, vulcanized or thermoplastic Determination of stress relaxation in compression Part 1: Testing at constant temperature |
| TR 4271 : 1 | AEROSPACE SERIES - O-RINGS GROOVES - DESIGN CRITERIA FOR O-RING GROOVES - BASIC CALCULATIONS |
| SAE AMS 7272 : 2013 | RUBBER: BUTADIENE-ACRYLONITRILE (NBR) SYNTHETIC LUBRICANT RESISTANT 65 - 75 HARDNESS FOR SEALS IN SYNTHETIC LUBRICANT SYSTEMS |
| BS ISO 3384-1 : 2011 | RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF STRESS RELAXATIONIN COMPRESSION - PART 1: TESTING AT CONSTANT TEMPERATURE |
| SAE J 515 : 2015 | SPECIFICATION FOR O-RING MATERIALS USED WITH HYDRAULIC CONNECTORS |
| I.S. EN ISO 14998:2013 | PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - COMPLETION ACCESSORIES (ISO 14998:2013) |
| ISO 8399-1:1998 | Aerospace — Accessory drives and mounting flanges (Metric series) — Part 1: Design criteria |
| SAE AS 83248/2 : 2016 | O-RING MOLDED FROM AMS7259 MATERIAL |
| ISO 6164:1994 | Hydraulic fluid power Four-screw, one-piece square-flange connections for use at pressures of 25 MPa and 40 MPa (250 bar and 400 bar) |
| SAE AS 5728 : 2016 | O-RING MOLDED FROM AMS7268 (SILICONE) MATERIAL |
| I.S. EN ISO 23936-2:2011 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - NON-METALLIC MATERIALS IN CONTACT WITH MEDIA RELATED TO OIL AND GAS PRODUCTION - PART 2: ELASTOMERS (ISO 23936-2:2011) |
| SAE J 2593 : 2015 | INFORMATION REPORT FOR THE INSTALLATION OF FLUID CONDUCTORS AND CONNECTORS |
| SAE J 518/3 : 2015 | HYDRAULIC FLANGE CLAMPS, 2-SCREW FLANGE CONNECTION TO BE USED WITH SAE J518-1, (CODE 61) CONNECTIONS WHERE ONLY LOW PRESSURE IS REQUIRED |
| NF EN ISO 17078-3 : 2010 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 3: RUNNING TOOLS, PULLING TOOLS AND KICK-OVER TOOLS AND LATCHES FOR SIDE-POCKET MANDRELS |
| UNI EN ISO 17078-3 : 2009 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 3: RUNNING TOOLS, PULLING TOOLS AND KICK-OVER TOOLS AND LATCHES FOR SIDE-POCKET MANDRELS |
| PREN ISO 12209 : DRAFT 2012 | GAS CYLINDERS - OUTLET CONNECTIONS FOR GAS CYLINDER VALVES FOR COMPRESSED BREATHABLE AIR (ISO/DIS 12209:2012) |
| DIN EN 3049:1998-07 | AEROSPACE SERIES - O-RINGS, IN FLUOROCARBON RUBBER (FKM), LOW COMPRESSION SET - HARDNESS 80 IRHD |
| ISO 12209:2013 | Gas cylinders — Outlet connections for gas cylinder valves for compressed breathable air |
| 09/30206527 DC : 0 | BS EN 60079-0 ED 6.0 - EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS |
| BIS IS/IEC 60079-0 : 2011 | EXPLOSIVE ATMOSPHERES - PART 0: GENERAL REQUIREMENTS |
| I.S. EN ISO 10432:2005 | PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - SUBSURFACE SAFETY VALVE EQUIPMENT |
| I.S. EN ISO 14310:2008 | PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - PACKERS AND BRIDGE PLUGS |
| I.S. EN 3746:2007 | AEROSPACE SERIES - O-RINGS, IN FLUOROSILICONE RUBBER (FVMQ) - HARDNESS 80 IRHD |
| I.S. EN ISO 16070:2006 | PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - LOCK MANDRELS AND LANDING NIPPLES |
| I.S. EN 3049:1998 | AEROSPACE SERIES - O-RINGS, IN FLUOROCARBON RUBBER (FKM), LOW COMPRESSION SET - HARDNESS 80 IRHD |
| BS 903-A42:1992 | Physical testing of rubber Method for determination of stress relaxation in compression at ambient and at elevated temperatures |
| SAE AS 28778 : 2016 | O-RING, STRAIGHT THREAD TUBE FITTING BOSS MOLDED FROM AMS-P-5510 RUBBER |
| BS ISO 18170:2017 | Aerospace series. AC induction electric motor driven, variable delivery, hydraulic pumps. General requirements |
| 98/706003 DC : 0 | ISO/CD 3601-2 - FLUID SYSTEMS - SEALING DEVICES - O-RINGS - PART 2: HOUSING DIMENSIONS FOR GENERAL APPLICATIONS |
| 96/709826 DC : DRAFT JUL 1996 | ISO/CD 6164-1 - HYDRAULIC FLUID POWER - ONE-PIECE SQUARE-FLANGE CONNECTORS - PART 1: FOUR-SCREW SQUARE-FLANGE CONNECTORS FOR USE AT PRESSURE OF 25MPA (250 BAR) TO 35 MPA (350 BAR), DN 10 TO DN 63 |
| I.S. EN 28430-3:1993 | RESISTANCE SPOT WELDING - ELECTRODE HOLDERS - PART 3: PARALLEL SHANK FIXING FOR END THRUST |
| 10/30219184 DC : 0 | BS ISO 23936-2 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - NON-METALLIC MATERIALS IN CONTACT WITH MEDIA RELATED TO OIL AND GAS PRODUCTION - PART 2: ELASTOMERS |
| 08/30181175 DC : DRAFT APR 2008 | BS ISO 22089 - AEROSPACE - HYDRAULIC POWER TRANSFER UNITS - GENERAL SPECIFICATIONS |
| BS 7796:1995 | Specification for hydraulic fluid power. Four-screw split-flange connections for use at pressures of 2,5 MPa to 40 MPa (25 bar to 400 bar). Type 1 metric series and type 11 inch series |
| 16/30282578 DC : 0 | BS ISO 18170 - AEROSPACE - AC INDUCTION ELECTRIC MOTOR DRIVEN, VARIABLE DELIVERY, HYDRAULIC PUMPS - GENERAL REQUIREMENTS |
| XP PREN 3746 : 1995 XP | AEROSPACE SERIES - O-RINGS, IN FLUOROSILICONE RUBBER (FVMQ) - HARDNESS 80 IRHD |
| API 11D3 : 2008 : R2015 | PROGRESSING CAVITY PUMP SYSTEMS FOR ARTIFICIAL LIFT - SURFACE-DRIVE SYSTEMS |
| BS EN ISO 8430-3:2016 | Resistance spot welding. Electrode holders Parallel shank fixing for end thrust |
| 12/30235512 DC : 0 | BS ISO 5145 - CYLINDER VALVE OUTLETS FOR GASES AND GAS MIXTURES - SELECTION AND DIMENSIONING |
| SAE AIR 2000 : 2000 | AEROSPACE FLUID SYSTEM STANDARDS, METRIC, NATIONAL AND INTERNATIONAL |
| SAE AS 27194C : 2014(S2018) | SEAL, BONDED, ALUMINUM ALLOY 6061-T6, AMS4027, MOLD IN GROOVE, NBR RUBBER, AMS-P-5315 |
| SAE J 2551/2 : 2013 | RECOMMENDED PRACTICES FOR FLUID CONDUCTOR CARBON, ALLOY AND HIGH STRENGTH LOW ALLOY STEEL TUBING APPLICATIONS - PART 2: GENERAL SPECIFICATIONS AND PERFORMANCE REQUIREMENTS |
| SAE AS 29561 : 2015 | O-RING, SYNTHETIC LUBRICANT RESISTANT MOLDED FROM AMS-R-7362 RUBBER |
| API 11D1 CHINESE : 2009 | PACKERS AND BRIDGE PLUGS |
| SAE AS 6414 : 2017 | MANUFACTURING PROCESSING REQUIREMENTS FOR MOLDED ELASTOMER COMPONENTS USED IN AEROSPACE APPLICATIONS |
| ISO 6162-2:2018 | Hydraulic fluid power — Flange connections with split or one-piece flange clamps and metric or inch screws — Part 2: Flange connectors, ports and mounting surfaces for use at a pressure of 42 MPa (420 bar), DN 13 to DN 76 |
| ISO 18170:2017 | Aerospace series — AC induction electric motor driven, variable delivery, hydraulic pumps — General requirements |
| SAE AS 6203 : 2016 | O-RING, MOLDED FROM AMS7379 RUBBER FOR USE WITH AS5202 PORTS |
| UNI ISO 3384-1 : 2013 | RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF STRESS RELAXATION IN COMPRESSION - PART 1: TESTING AT CONSTANT TEMPERATURE |
| SAE J 518/2 : 2017 | HYDRAULIC FLANGED TUBE, PIPE, AND HOSE CONNECTIONS, 4-SCREW FLANGE CONNECTION - PART 2: 42 MPA (CODE 62) |
| API 19V : 2013 | SUBSURFACE BARRIER VALVES AND RELATED EQUIPMENT |
| ISO 10432:2004 | Petroleum and natural gas industries Downhole equipment Subsurface safety valve equipment |
| ISO 9206:2016 | Aerospace series Constant displacement hydraulic motors General specifications |
| I.S. EN ISO 17078-3:2009 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 3: RUNNING TOOLS, PULLING TOOLS AND KICK-OVER TOOLS AND LATCHES FOR SIDE-POCKET MANDRELS |
| EN 61518:2001/corrigendum:2002 | MATING DIMENSIONS BETWEEN DIFFERENTIAL PRESSURE (TYPE) MEASURING INSTRUMENTS AND FLANGED-ON SHUT-OFF DEVICES UP TO 413 BAR (41,3 MPA) |
| EN 3663:2001/AC:2003 | AEROSPACE SERIES - PIPE COUPLING - O-RINGS IN RUBBER NBR, 75 IRHD, TEMPERATURE RANGE: -55 DEGREES C TO +135 DEGREES C |
| UNI EN 15202 : 2012 | LPG EQUIPMENT AND ACCESSORIES - ESSENTIAL OPERATIONAL DIMENSIONS FOR LPG CYLINDER VALVE OUTLET AND ASSOCIATED EQUIPMENT CONNECTIONS |
| EN 3049:1998 | Aerospace series - O-rings, in fluorocarbon rubber (FKM), low compression set - Hardness 80 IRHD |
| EN ISO 10432:2004 | Petroleum and natural gas industries - Downhole equipment - Subsurface safety valve equipment (ISO 10432:2004) |
| UNI EN ISO 28781 : 2010 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - SUBSURFACE BARRIER VALVES AND RELATED EQUIPMENT |
| UNI EN ISO 14310 : 2009 | PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - PACKERS AND BRIDGE PLUGS |
| UNI EN ISO 14998 : 2014 | PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - COMPLETION ACCESSORIES |
| BS ISO 3601-4:2008 | Fluid power systems. O-rings Anti-extrusion rings (back-up rings) |
| UNI ISO 3384 : 2009 | RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF STRESS RELAXATION IN COMPRESSION AT AMBIENT AND AT ELEVATED TEMPERATURES |
| 07/30161097 DC : 0 | EN ISO 14310 - PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT PACKERS AND BRIDGE PLUGS |
| SAE AS 83461/1 : 2016 | M83461 O-RING MOLDED FROM AMS-P-83461 RUBBER |
| BS A 328-1:1999 | Accessory drives and mounting flanges (Metric sizes) Design criteria |
| 16/30338730 DC : 0 | BS ISO 18387 - AEROSPACE - LINEAR HYDRAULIC UTILITY ACTUATOR - GENERAL SPECIFICATIONS |
| SAE J 2337-2 : 2017 | CONNECTIONS FOR FLUID POWER AND HIGH PRESSURE USE - PORTS, STUD ENDS, AND PLUGS WITH ISO 261 THREADS AND O-RING SEALING - PART 2: STUD END REQUIREMENTS, DIMENSIONS, DESIGN, AND TEST METHODS |
| 01/712196 DC : DRAFT SEP 2001 | ISO 5145 - CYLINDER VALVE OUTLETS FOR GASES AND GAS MIXTURES - SELECTION AND DIMENSIONING |
| 16/30346081 DC : 0 | BS EN 4510 - AEROSPACE SERIES - PIPE COUPLINGS, 60 DEGREE, SPHERICAL IN TITANIUM ALLOY TIP64001 - ADAPTERS, STRAIGHT, DOUBLE END, WITH LOCKING RING |
| API SPEC 19OH : 2018 | OPENHOLE ISOLATION EQUIPMENT |
| DIN EN ISO 12209 E : 2013 | GAS CYLINDERS - OUTLET CONNECTIONS FOR GAS CYLINDER VALVES FOR COMPRESSED BREATHABLE AIR (ISO 12209:2013 + AMD 1:2016, CORRECTED VERSION 2017-03) |
| BS EN ISO 23936-2:2011 | Petroleum, petrochemical and natural gas industries. Nonmetallic materials in contact with media related to oil and gas production Elastomers |
| SAE AMS7338A : 2013 | RUBBER: BUTYL (IIR ABBREVIATION), PHOSPHATE ESTER RESISTANT, 65 TO 75 HARDNESS, FOR SEALS IN HYDRAULIC SYSTEMS, ETC. |
| 05/30125303 DC : DRAFT APR 2005 | BS EN 15202 - LPG EQUIPMENT AND ACCESSORIES - ESSENTIAL OPERATIONAL DIMENSIONS FOR LPG CYLINDER VALVE OUTLET AND ASSOCIATED EQUIPMENT CONNECTIONS |
| NF ISO 3384-1 : 2012 AMD 1 2013 | RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF STRESS RELAXATION IN COMPRESSION - PART 1: TESTING AT CONSTANT TEMPERATURE |
| SAE AS 83248/1 : 2016 | O-RING MOLDED FROM AMS7276 MATERIAL |
| BS EN ISO 12209 : 2013 | GAS CYLINDERS - OUTLET CONNECTIONS FOR GAS CYLINDER VALVES FOR COMPRESSED BREATHABLE AIR (ISO 12209:2013) |
| BS ISO 3601-2:2016 | Fluid power systems. O-rings Housing dimensions for general applications |
| SAE AMS 7259 : 2013 | RUBBER: FLOUROCARBON (FKM), HIGH TEMPERATURE/FLUID RESISTANT, LOW COMPRESSION SET/85 TO 95 HARDNESS, FOR SEALS IN FUEL SYSTEMS AND SPECIFIC ENGINE OIL SYSTEMS |
| BS ISO 5145:2017 | Gas cylinders. Cylinder valve outlets for gases and gas mixtures. Selection and dimensioning |
| 07/30150187 DC : DRAFT AUG 2007 | BS ISO 17078-3 - PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 3: RUNNING, PULLING, AND KICK-OVER TOOLS AND LATCHES FOR SIDE-POCKET MANDRELS |
| 09/30154810 DC : 0 | BS EN ISO 28781 - PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - SUBSURFACE VALVES AND RELATED EQUIPMENT |
| BS ISO 6162-1:2012 | Hydraulic fluid power. Flange connections with split or one-piece flange clamps and metric or inch screws Flange connectors, ports and mounting surfaces for use at pressures of 3,5 MPa (35 bar) to 35 MPa (350 bar), DN 13 to DN 127 |
| API 14L : 2007 : R2012 | SPECIFICATION FOR LOCK MANDRELS AND LANDING NIPPLES |
| BS 4215-13:1990 | Resistance spot welding electrodes, electrode holders and ancillary equipment Specification for electrode holders, parallel shank fixing for end thrust |
| 04/30107683 DC : DRAFT DEC 2004 | BS EN ISO 15136-2 - PETROLEUM AND NATURAL GAS INDUSTRIES - PROGRESSING CAVITY PUMPS SYSTEMS FOR ARTIFICIAL LIFT - PART 2: SURFACE DRIVE SYSTEMS |
| 04/30103964 DC : DRAFT MAY 2004 | BS ISO 16070 - PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - LOCK MANDRELS AND LANDING NIPPLES |
| SAE AS 5729 : 2016 | O-RING MOLDED FROM AMS7379 (FLUOROCARBON) MATERIAL |
| SAE J 518/1 : 2013 | HYDRAULIC FLANGED TUBE, PIPE, AND HOSE CONNECTIONS, 4-SCREW FLANGE CONNECTION - PART 1: 3.5 MPA TO 35 MPA (CODE 61) |
| BS A 328-2:1999 | Accessory drives and mounting flanges (Metric sizes) Dimensions |
| BS M 65:1987 | Specification for pressure compensated variable delivery hydraulic pumps |
| SAE AS 27198 : 2014 | SEAL, BONDED, 302 CORROSION RESISTANT STEEL, AMS5516, MOLD IN GROOVE, FLUOROSILICONE RUBBER, MIL-DTL-25988 |
| SAE AS 27195 : 2014 | SEAL, BONDED, ALUMINUM ALLOY 6061-T6, AMS4027, MOLD IN GROOVE, NBR RUBBER, AMS-R-7362 |
| API 14A RUSSIAN : 2001 | SPECIFICATION FOR SUBSURFACE SAFETY VALVE EQUIPMENT |
| API 19G3 : 2011 | RUNNING TOOLS, PULLING TOOLS, AND KICK-OVER TOOLS AND LATCHES FOR SIDE-POCKET MANDRELS |
| 16/30318653 DC : 0 | BS EN 681-1 - ELASTOMERIC SEALS - MATERIAL REQUIREMENTS FOR PIPE JOINT SEALS USED IN WATER AND DRAINAGE APPLICATIONS - PART 1: VULCANIZED RUBBER |
| DIN EN ISO 12209:2013-12 | GAS CYLINDERS - OUTLET CONNECTIONS FOR GAS CYLINDER VALVES FOR COMPRESSED BREATHABLE AIR (ISO 12209:2013 + AMD 1:2016, CORRECTED VERSION 2017-03) |
| ISO 3601-5:2015 | Fluid power systems O-rings Part 5: Specification of elastomeric materials for industrial applications |
| ISO 5145:2017 | Gas cylinders — Cylinder valve outlets for gases and gas mixtures — Selection and dimensioning |
| ISO 6162-1:2012 | Hydraulic fluid power — Flange connections with split or one-piece flange clamps and metric or inch screws — Part 1: Flange connectors, ports and mounting surfaces for use at pressures of 3,5 MPa (35 bar) to 35 MPa (350 bar), DN 13 to DN 127 |
| BS EN 3049:1998 | O-rings, in fluorocarbon rubber (FKM), low compression set. Hardness 80 IRHD |
| BS EN ISO 10432:2004 | Petroleum and natural gas industries. Downhole equipment. Subsurface safety valve equipment |
| BS EN 28430-3:1992 | Specification for resistance spot welding. Electrode holders Parallel shank fixing for end thrust |
| IEC 60079-0:2017 RLV | Explosive atmospheres - Part 0: Equipment - General requirements |
| BS EN 3746:2007 | Aerospace series. O-rings, in fluorosilicone rubber (FVMQ). Hardness 80 IRHD |
| DIN EN 15202 E : 2012 | LPG EQUIPMENT AND ACCESSORIES - ESSENTIAL OPERATIONAL DIMENSIONS FOR LPG CYLINDER VALVE OUTLET AND ASSOCIATED EQUIPMENT CONNECTIONS |
| BS EN 3663:2001 | Aerospace series. Pipe coupling. O-rings in rubber NBR, 75 IRHD, temperature range: -55°C to 135°C |
| ISO 16070:2005 | Petroleum and natural gas industries Downhole equipment Lock mandrels and landing nipples |
| BS EN ISO 15136-2:2006 | Petroleum and natural gas industries. Progressing cavity pump systems for artificial lift Surface drive systems |
| UNE-EN 60079-0:2013 | Explosive atmospheres - Part 0: Equipment - General requirements |
| BS EN ISO 16070:2005 | Petroleum and natural gas industries. Downhole equipment. Lock mandrels and landing nipples |
| UNE-EN ISO 12209:2014 | Gas cylinders - Outlet connections for gas cylinder valves for compressed breathable air (ISO 12209:2013) |
| ISO 15136-2:2006 | Petroleum and natural gas industries — Progressing cavity pump systems for artificial lift — Part 2: Surface-drive systems |
| ISO 3384:2005 | Rubber, vulcanized or thermoplastic Determination of stress relaxation in compression at ambient and at elevated temperatures |
| ONORM EN 15202 : 2012 | LPG EQUIPMENT AND ACCESSORIES - ESSENTIAL OPERATIONAL DIMENSIONS FOR LPG CYLINDER VALVE OUTLET AND ASSOCIATED EQUIPMENT CONNECTIONS |
| ISO 14998:2013 | Petroleum and natural gas industries — Downhole equipment — Completion accessories |
| ISO 14310:2008 | Petroleum and natural gas industries — Downhole equipment — Packers and bridge plugs |
| IEC 61518:2001 | Mating dimensions between differential pressure (type) measuring instruments and flanged-on shut-off devices up to 413 BAR (41,3 MPa) |
| BS EN ISO 12209-1:2001 | Gas cylinders. Outlet connections for gas cylinder valves for compressed breathable air Yoke type connections |
| UNE-EN 15202:2012 | LPG equipment and accessories - Essential operational dimensions for LPG cylinder valve outlet and associated equipment connections |
| ISO 17078-3:2009 | Petroleum and natural gas industries Drilling and production equipment Part 3: Running tools, pulling tools and kick-over tools and latches for side-pocket mandrels |
| EN ISO 17078-3:2009 | Petroleum and natural gas industries - Drilling and production equipment - Part 3: Running tools, pulling tools and kick-over tools and latches for side-pocket mandrels (ISO 17078-3:2009) |
| EN ISO 8430-3:2016 | Resistance spot welding - Electrode holders - Part 3: Parallel shank fixing for end thrust (ISO 8430-3:2016) |
| EN ISO 23936-2:2011 | Petroleum, petrochemical and natural gas industries - Non-metallic materials in contact with media related to oil and gas production - Part 2: Elastomers (ISO 23936-2:2011) |
| EN 3746:2007 | Aerospace series - O-rings, in fluorosilicone rubber (FVMQ) - Hardness 80 IRHD |
| EN ISO 14310:2008 | Petroleum and natural gas industries - Downhole equipment - Packers and bridge plugs (ISO 14310:2008) |
| EN 28430-3:1992 | Resistance spot welding - Electrode holders - Part 3: Parallel shank fixing for end thrust (ISO 8430-3:1988) |
| EN ISO 16070:2005 | Petroleum and natural gas industries - Downhole equipment - Lock mandrels and landing nipples (ISO 16070:2005) |
| EN ISO 14998:2013 | Petroleum and natural gas industries - Downhole equipment - Completion accessories (ISO 14998:2013) |
| EN 2607 : 2005 | AEROSPACE SERIES - O-RINGS FOR ADAPTORS, THREADED, WITH LOCKRING - SURVEY |
| EN ISO 15136-2:2006 | Petroleum and natural gas industries - Progressing cavity pump systems for artificial lift - Part 2: Surface-drive systems (ISO 15136-2:2006) |
| EN ISO 28781:2010 | Petroleum and natural gas industries - Drilling and production equipment - Subsurface barrier valves and related equipment (ISO 28781:2010) |
| SAE AS 27197 : 2014 | SEAL, BONDED, 302 CORROSION RESISTANT STEEL, AMS5516, MOLD IN GROOVE, SILICONE RUBBER, AMS7268 |
| 12/30241747 DC : 0 | BS EN ISO 12209 - GAS CYLINDERS - OUTLET CONNECTIONS FOR GAS CYLINDER VALVES FOR COMPRESSED BREATHABLE AIR |
| BS EN ISO 28781:2010 | Petroleum and natural gas industries. Drilling and production equipment. Subsurface barrier valves and related equipment |
| DIN ISO 3384-1 E : 2015 | RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF STRESS RELAXATION IN COMPRESSION - PART 1: TESTING AT CONSTANT TEMPERATURE (ISO 3384-1:2011 + AMD.1:2013) |
| 10/30218994 DC : 0 | BS EN 15202 - LPG EQUIPMENT AND ACCESSORIES - ESSENTIAL OPERATIONAL DIMENSIONS FOR LPG CYLINDER VALVE OUTLET AND ASSOCIATED EQUIPMENT CONNECTIONS |
| BS ISO 22089:2009 | Aerospace. Hydraulic power transfer units. General specifications |
| 13/30279576 DC : 0 | BS ISO 9206 - AEROSPACE - CONSTANT DISPLACEMENT HYDRAULIC MOTORS - GENERAL SPECIFICATIONS |
| ISO 12334:2000 | Aerospace Hydraulic, pressure-compensated, variable delivery pumps General requirement for 35 000 kPa systems |
| ISO 8278:2016 | Aerospace series Hydraulic, pressure compensated, variable delivery pumps General requirements |
| 17/30356394 DC : 0 | BS ISO 9206 ED 3 - AEROSPACE - FIXED DISPLACEMENT HYDRAULIC MOTORS - GENERAL SPECIFICATIONS |
| 03/311760 DC : DRAFT JULY 2003 | ISO 10432 - PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - SUBSURFACE SAFETY VALVE EQUIPMENT |
| UNE-EN ISO 8430-3:2016 | Resistance spot welding - Electrode holders - Part 3: Parallel shank fixing for end thrust (ISO 8430-3:2016) |
| DIN ISO 3601-4:2010-08 | Fluid power systems - O-rings - Part 4: Anti-extrusion rings (back-up rings) (ISO 3601-4:2008) |
| SAE AMS 7274 : 2014 | RUBBER: BUTADIENE-ACRYLONITRILE (NBR), 65 TO 75 HARDNESS, FOR ELASTOMERIC SEALS IN AIRCRAFT ENGINE OIL SYSTEMS |
| DIN ISO 3384-1:2015-12 | Rubber, vulcanized or thermoplastic - Determination of stress relaxation in compression - Part 1: Testing at constant temperature (ISO 3384-1:2011 + Amd.1:2013) |
| BS ISO 23748:2016 | Aerospace series. O-ring grooves. Dimensions |
| ISO 22089:2009 | Aerospace Hydraulic power transfer units General specifications |
| DIN ISO 3601-3:2010-08 | Fluid power systems - O-Rings - Part 3: Quality acceptance criteria (ISO 3601-3:2005) |
| DIN ISO 6162-1:2006-02 | HYDRAULIC FLUID POWER - FLANGE CONNECTORS WITH SPLIT OR ONE-PIECE FLANGE CLAMPS AND METRIC OR INCH SCREWS - PART 1: FLANGE CONNECTORS FOR USE AT PRESSURES OF 3,5 MPA (35 BAR) TO 35 MPA (350 BAR), DN 13 TO DN 127 |
| BS ISO 12333:2000 | Aerospace. Constant displacement hydraulic motors. General specifications for 35000 kPa systems |
| BS EN 61518:2001 | Mating dimensions between differential pressure (type) measuring instruments and flanged-on shut-off devices up to 413 bar (41,3 MPa) |
| BS ISO 3384:2005 | Rubber, vulcanized or thermoplastic. Determination of stress relaxationi n compression at ambient and at elevated temperatures |
| PREN 4510 : DRAFT 2017 | AEROSPACE SERIES - PIPE COUPLING, 60 DEGREES, SPHERICAL, IN TITANIUM ALLOY TI-P64001, PORT ADAPTER, STRAIGHT, DOUBLE END, WITH LOCKING RING |
| DIN ISO 6162-2:2006-02 | HYDRAULIC FLUID POWER - FLANGE CONNECTORS WITH SPLIT OR ONE-PIECE FLANGE CLAMPS AND METRIC OR INCH SCREWS - PART 2: FLANGE CONNECTORS FOR USE AT PRESSURES OF 35 MPA (350 BAR) TO 40 MPA (400 BAR), DN 13 TO DN 51 |
| SAE AMS 7257 : 2014 | PERFLUOROCARBON (FFKM) ENGINE OIL, FUEL AND HYDRAULIC FLUID RESISTANT 70 TO 80 HARDNESS FOR HIGH TEMPERATURE SEALS IN ENGINE OIL SYSTEMS, FUEL SYSTEMS AND HYDRAULIC SYSTEMS |
| API SPEC 19AC : 2016 | SPECIFICATION FOR COMPLETION ACCESSORIES |
| SAE AS 4941 : 2015 | AEROSPACE - GENERAL REQUIREMENTS FOR COMMERCIAL AIRCRAFT HYDRAULIC COMPONENTS |
| BS ISO 3601-3 : 2005 | FLUID POWER SYSTEMS - O-RINGS - PART 3: QUALITY ACCEPTANCE CRITERIA |
| I.S. EN ISO 8430-3:2016 | RESISTANCE SPOT WELDING - ELECTRODE HOLDERS - PART 3: PARALLEL SHANK FIXING FOR END THRUST (ISO 8430-3:2016) |
| I.S. EN ISO 28781:2010 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - SUBSURFACE BARRIER VALVES AND RELATED EQUIPMENT |
| SAE AS 29512 : 2016 | HYDROCARBON FUEL RESISTANT, TUBE FITTING, O-RING MOLDED FROM AMS-P-5315 RUBBER |
| SAE AMS 7287 : 2012 | FLUOROCARBON ELASTOMER (FKM) HIGH TEMPERATURE/HTS OIL RESISTANT/FUEL RESISTANT LOW COMPRESSION SET/70 TO 80 HARDNESS, LOW TEMPERATURE TG -22 DEGREES F (-30 DEGREES C) FOR SEALS IN OIL/FUEL/SPECIFIC HYDRAULIC SYSTEMS |
| SAE AS 29513 : 2016 | PACKING, PREFORMED, HYDROCARBON FUEL RESISTANT, 'O' RING |
| NORSOK M 630 : REV 6 | MATERIAL DATA SHEETS AND ELEMENT DATA SHEETS FOR PIPING |
| IEC 60079-0:2017 | Explosive atmospheres - Part 0: Equipment - General requirements |
| ISO 3601-2:2016 | Fluid power systems — O-rings — Part 2: Housing dimensions for general applications |
| I.S. EN 60079-0:2012 | EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS (IEC 60079-0:2011 (MOD)) |
| IEC 60079-0 REDLINE : 7.0 | EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS |
| ISO 6162:1994 | Hydraulic fluid power Four-screw split-flange connections for use at pressures of 2,5 MPa to 40 MPa (25 bar to 400 bar) Type I metric series and type II inch series |
| ISO 28781:2010 | Petroleum and natural gas industries Drilling and production equipment Subsurface barrier valves and related equipment |
| ISO 8430-3:2016 | Resistance spot welding Electrode holders Part 3: Parallel shank fixing for end thrust |
| ISO 23936-2:2011 | Petroleum, petrochemical and natural gas industries — Non-metallic materials in contact with media related to oil and gas production — Part 2: Elastomers |
| BS EN 2607:2005 | Aerospace series. O-rings for adaptors, threaded, with lockring. Survey |
| EN 60079-0:2012/A11:2013 | EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS (IEC 60079-0:2011, MODIFIED) |
| DIN EN 15202:2012-09 | LPG EQUIPMENT AND ACCESSORIES - ESSENTIAL OPERATIONAL DIMENSIONS FOR LPG CYLINDER VALVE OUTLET AND ASSOCIATED EQUIPMENT CONNECTIONS |
| DIN ISO 3384:2008-07 | RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF STRESS RELAXATION IN COMPRESSION AT AMBIENT AND AT ELEVATED TEMPERATURES |
| DIN 3771-1:1984-12 | O-RINGS FOR USE IN FLUID SYSTEMS - DIMENSIONS TO ISO 3601-1 |
| EN ISO 12209 : 2013 AMD 1/COR 17 | GAS CYLINDERS - OUTLET CONNECTIONS FOR GAS CYLINDER VALVES FOR COMPRESSED BREATHABLE AIR (ISO 12209:2013/AMD 1:2016, CORRECTED VERSION 2017-03) |
| SAE AMS7361B:2023 | Rubber: Ethylene Propylene (EP) Phosphate Ester Resistant Low Temperature Tg -67 °F (-55 °C), 75 to 85 Type M Hardness for Seals in Hydraulic Systems |
| ISO 5598:2008 | Fluid power systems and components Vocabulary |
| ISO 16031-1:2002 | Aerospace fluid systems — O-rings, inch series: Inside diameters and cross sections, tolerances and size-identification codes — Part 1: Close tolerances for hydraulic systems |
| ISO 16031-2:2003 | Aerospace fluid systems O-rings, inch series: Inside diameters and cross-sections, tolerances and size-identification codes Part 2: Standard tolerances for non-hydraulic systems |
| SAE AS 568 : 2014 | AEROSPACE SIZE STANDARD FOR O-RINGS |
| ISO 3601-3:2005 | Fluid power systems O-rings Part 3: Quality acceptance criteria |
| ISO 48:2010 | Rubber, vulcanized or thermoplastic Determination of hardness (hardness between 10 IRHD and 100 IRHD) |
| ISO 1629:2013 | Rubber and latices — Nomenclature |
$326.02
Including GST where applicable
AUD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - French
PDF 1 User - French
PDF 3 Users - French
PDF 5 Users - French
PDF 9 Users - French
Hardcopy - English
PDF 1 User - English
PDF 3 Users - English
PDF 5 Users - English
PDF 9 Users - English
Hardcopy - French
PDF 1 User - French
PDF 3 Users - French
PDF 5 Users - French
PDF 9 Users - French
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.