ISO 404:2013
Current
Current
The latest, up-to-date edition.
Steel and steel products — General technical delivery requirements
Amended by
Available format(s)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
English
Published date
21-06-2013
ISO 404:2013 specifies the general technical delivery requirements for all steel products covered by ISO 6929, with the exception of steel castings and powder metallurgical products.
ISO 10474 describes the inspection documents to be used.
Where the delivery requirements agreed upon for the order or specified in the appropriate product or material standard differ from the general technical delivery requirements defined in ISO 404:2013, then it is the requirements agreed for ordering or specified in the appropriate product or material standard that apply.
| Committee |
ISO/TC 17/SC 20
|
| DevelopmentNote |
Supersedes ISO/DIS 404. (06/2013)
|
| DocumentType |
Standard
|
| Pages |
14
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| SAC GB/T 17505 : 1998 | Identical |
| BS ISO 404:2013 | Identical |
| IS 8910 : 2022 | Identical |
| NS 10010 : 1984 | Similar to |
| NFA 00 001 : 1988 | Similar to |
| DIN 50049:1992-04 | Identical |
| DIN 17010:1985-06 | Identical |
| NFA 49 000 : 1989 | Similar to |
| NFA 03 115 : 1974 | Corresponds |
| 91/48084 DC : DRAFT NOV 1991 | ISO/DIS 4952 - STRUCTURAL STEELS WITH IMPROVED ATMOSPHERIC CORROSION RESISTANCE |
| BS ISO 8535-1:2016 | Diesel engines. Steel tubes for high-pressure fuel injection pipes Requirements for seamless cold-drawn single-wall tubes |
| IEC 60404-8-11:2018 | Magnetic materials - Part 8-11: Specifications for individual materials - Fe-based amorphous strip delivered in the semi-processed state |
| BS ISO 5832-1:2007 | Implants for surgery. Metallic materials Wrought stainless steel |
| CEI EN 60404-8-6 : 2009 | MAGNETIC MATERIALS - PART 8-6: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SOFT MAGNETIC METALLIC MATERIALS |
| 04/30094090 DC : DRAFT MAR 2004 | IEC 60404-8-3 ED.3 - MAGNETIC MATERIALS - PART 8-3: SPECIFICATIONS OF INDIVIDUAL MATERIALS - COLD-ROLLED ELECTRICAL ALLOYED AND NON-ALLOYED STEEL SHEET AND STRIP DELIVERED IN THE SEMI PROCESSED STATE |
| 15/30287641 DC : 0 | BS EN ISO 16120-1 - NON-ALLOY STEEL WIRE ROD FOR CONVERSION TO WIRE - PART 1: GENERAL REQUIREMENTS |
| NES 848 PT1 : ISSUE 1 | REQUIREMENTS FOR CARBON MANGANESE AND LOW ALLOY STEEL FORGINGS - CARBON MANGANESE STEEL FORGINGS |
| ISO 11949:2016 | Cold-reduced tinmill products Electrolytic tinplate |
| 12/30250149 DC : 0 | BS ISO 16143-2 - STAINLESS STEELS FOR GENERAL PURPOSES - PART 2: SEMI-FINISHED PRODUCTS, BARS, RODS AND SECTIONS |
| 13/30275387 DC : 0 | BS ISO 20332 - CRANES - PROOF OF COMPETENCE OF STEEL STRUCTURES |
| API 5L REDLINE : 2007 | SPECIFICATION FOR LINE PIPE |
| 00/709299 DC : DRAFT JUNE 2000 | ISO 8535-2:1993 (REVISION) - COMPRESSION IGNITION ENGINES - STEEL TUBES FOR HIGH PRESSURE FUEL INJECTION PIPES - PART 2: REQUIREMENTS FOR COMPOSITE TUBES |
| 09/30196508 DC : 0 | BS ISO 9328-1 - STEEL FLAT PRODUCTS FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 1: GENERAL REQUIREMENTS |
| 15/30310217 DC : 0 | BS ISO 5832-1 - IMPLANTS FOR SURGERY - METALLIC MATERIALS - PART 1: WROUGHT STAINLESS STEEL |
| 13/30279057 DC : 0 | BS ISO 683-4 - HEAT-TREATABLE STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 4: FREE-CUTTING STEELS |
| BS ISO 10474:2013 | Steel and steel products. Inspection documents |
| ISO 6935-1:2007 | Steel for the reinforcement of concrete Part 1: Plain bars |
| BS ISO 8535-2:2003 | Compression ignition engines. Steel tubes for high pressure fuel injection pipes Requirements for composite tubes |
| ISO 23717:2006 | Steel wire and wire products Hose reinforcement wire |
| ISO 9330-6:1997 | Welded steel tubes for pressure purposes — Technical delivery conditions — Part 6: Longitudinally welded austenitic stainless steel tubes |
| 11/30191086 DC : 0 | BS ISO 12633-1 - HOT-FINISHED STRUCTURAL HOLLOW SECTIONS OF NON-ALLOY AND FINE GRAIN STEELS - PART 1: TECHNICAL DELIVERY CONDITIONS |
| 15/30316161 DC : 0 | BS ISO 6931-1 - STAINLESS STEELS FOR SPRINGS - PART 1: WIRE |
| BS 7252-1:1990 | Metallic materials for surgical implants Specification for wrought stainless steel |
| 04/30116142 DC : DRAFT JUL 2004 | ISO 4952 - STRUCTURAL STEELS WITH IMPROVED ATMOSPHERIC CORROSION RESISTANCE |
| 02/713148 DC : DRAFT NOV 2002 | BS ISO 16143-2 - STAINLESS STEELS FOR GENERAL PURPOSES - PART 2: SEMI-FINISHED PRODUCTS, BARS, RODS AND SECTIONS |
| 06/30159843 DC : 0 | BS ISO 13680 - PETROLEUM AND NATURAL GAS INDUSTRIES - CORROSION - RESISTANT ALLOY SEAMLESS TUBES FOR USE AS CASING, TUBING AND COUPLING STOCK - TECHNICAL DELIVERY CONDITIONS |
| 04/30069217 DC : DRAFT FEB 2004 | ISO 16143-3 - STAINLESS STEELS FOR GENERAL PURPOSES - PART 3: WIRE |
| 05/30129061 DC : DRAFT FEB 2005 | ISO 7900 - STEEL WIRE AND WIRE PRODUCTS FOR FENCES - ZINC AND ZINC-ALLOY COATED STEEL BARBED WIRE |
| 05/30136183 DC : DRAFT JUL 2005 | IEC 60404-8-7 - MAGNETIC MATERIALS - PART 8-7: SPECIFICATION OF INDIVIDUAL MATERIALS - COLD-ROLLED GRAIN-ORIENTED ELECTRICAL STEEL SHEET AND STRIP DELIVERED IN THE FULLY-PROCESSED STATE |
| PREN 10208-3 : DRAFT 1997 | PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 3: PIPES OF REQUIREMENT CLASS C |
| ISO 4951-1:2001 | High yield strength steel bars and sections — Part 1: General delivery requirements |
| DIN EN ISO 3183:2013-03 | PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS (ISO 3183:2012) |
| BIS IS/ISO 5832-9 : 2007 | IMPLANTS FOR SURGERY - METALLIC MATERIALS - PART 9: WROUGHT HIGH NITROGEN STAINLESS STEEL |
| ISO 683-1:2016 | Heat-treatable steels, alloy steels and free-cutting steels Part 1: Non-alloy steels for quenching and tempering |
| I.S. EN ISO 4957:2000 | TOOL STEELS |
| ISO/TR 15461:1997 | Steel forgings Testing frequency, sampling conditions and test methods for mechanical tests |
| ISO 9330-2:1997 | Welded steel tubes for pressure purposes — Technical delivery conditions — Part 2: Electric resistance and induction welded unalloyed and alloyed steel tubes with specified elevated temperature properties |
| NES 848 PT2 : ISSUE 1 | REQUIREMENTS FOR CARBON MANGANESE AND LOW ALLOY STEEL FORGINGS - LOW ALLOY STEEL FORGINGS |
| ISO 11951:2016 | Cold-reduced tinmill products Blackplate |
| ISO 9328-1:2018 | Steel flat products for pressure purposes — Technical delivery conditions — Part 1: General requirements |
| EN ISO 3183:2012/A1:2018 | PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS (ISO 3183:2012) |
| UNE-EN ISO 16120-1:2017 | Non-alloy steel wire rod for conversion to wire - Part 1: General requirements (ISO 16120-1:2017) |
| BS EN ISO 10807:1997 | Pipework. Corrugated flexible metallic hose assemblies for the protection of electrical cables in explosive atmosphere |
| EN ISO 16120-1:2017 | NON-ALLOY STEEL WIRE ROD FOR CONVERSION TO WIRE - PART 1: GENERAL REQUIREMENTS (ISO 16120-1:2017) |
| EN 60404-8-6:2017 | Magnetic materials - Part 8-6: Specifications for individual materials - Soft magnetic metallic materials |
| ISO 11950:2016 | Cold-reduced tinmill products Electrolytic chromium/chromium oxide-coated steel |
| 11/30191093 DC : 0 | BS ISO 10799-1 - COLD FORMED WELDED STRUCTURAL HOLLOW SECTIONS OF NON-ALLOY AND FINE GRAIN STEELS - PART 1: TECHNICAL DELIVERY CONDITIONS |
| BS EN ISO 16120-3:2011 | Non-alloy steel wire rod for conversion to wire Specific requirements for rimmed and rimmed substitute, low-carbon steel wire rod |
| BIS IS/ISO 3183 : 2007 | PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS |
| 11/30230618 DC : 0 | BS ISO 683-2 - HEAT-TREATABLE STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 2: ALLOY STEELS FOR QUENCHING AND TEMPERING |
| 02/704957 DC : DRAFT NOV 2002 | ISO 683-14 - HEAT-TREATABLE STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 14: HOT-ROLLED STEELS FOR QUENCHED AND TEMPERED SPRINGS |
| BS ISO 7900:2006 | Steel wire and wire products for fences. Zinc- and zinc-alloy-coated steel barbed wire |
| 11/30203534 DC : DRAFT AUG 2011 | BS ISO 13270 - STEEL FIBRES FOR CONCRETE - DEFINITIONS AND SPECIFICATIONS |
| API 5L RUSSIAN : 2012 | SPECIFICATION FOR LINE PIPE |
| ISO/TS 7705:2017 | Guidelines for specifying Charpy V-notch impact prescriptions in steel specifications |
| 15/30334742 DC : 0 | BS EN 60404-8-8 ED 2.0 - MAGNETIC MATERIALS - PART 8-8: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - THIN ELECTRICAL STEEL STRIP AND SHEET FOR USE AT MEDIUM FREQUENCIES |
| ISO 10544:1992 | Cold-reduced steel wire for the reinforcement of concrete and the manufacture of welded fabric |
| 13/30252100 DC : 0 | BS ISO 4990 - STEEL CASTINGS - GENERAL TECHNICAL DELIVERY REQUIREMENTS |
| 09/30169302 DC : 0 | BS EN ISO 16120-1 - NON-ALLOY STEEL WIRE ROD FOR CONVERSION TO WIRE - PART 1: GENERAL REQUIREMENTS |
| 17/30339115 DC : 0 | ISO/DIS 4978 - STEEL SHEET AND STRIP FOR WELDED GAS CYLINDERS |
| API 5CRA : 2010 : INC : ERR 1 : 2011 | SPECIFICATION FOR CORROSION-RESISTANT ALLOY SEAMLESS TUBES FOR USE AS CASING, TUBING AND COUPLING STOCK |
| ISO 683-14:2004 | Heat-treatable steels, alloy steels and free-cutting steels — Part 14: Hot-rolled steels for quenched and tempered springs |
| 15/30248084 DC : 0 | BS ISO 11949 - COLD-REDUCED TINMILL PRODUCTS - ELECTROLYTIC TINPLATE |
| BS 7252-9:1990 | Metallic materials for surgical implants Specification for high-nitrogen stainless steel |
| BS ISO 16143-1:2014 | Stainless steels for general purposes Corrosion-resistant flat products |
| 13/30247437 DC : 0 | BS EN ISO 683-17 - HEAT-TREATED STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 17: BALL AND ROLLER BEARING STEELS (ISO/DIS 683-17:2013) |
| 08/30161340 DC : DRAFT FEB 2008 | BS EN 60404-8-10 - MAGNETIC MATERIALS - PART 8: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SECTION 10: SPECIFICATIONS FOR MAGNETIC MATERIALS (IRON AND STEEL) FOR USE IN RELAYS |
| ISO 9330-4:2000 | Welded steel tubes for pressure purposes — Technical delivery conditions — Part 4: Submerged arc-welded unalloyed and alloyed steel tubes with specified elevated temperature properties |
| I.S. EN ISO 3183:2012 | PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS (ISO 3183:2012) |
| BS ISO 7989-1:2006 | Steel wire and wire products. Non-ferrous metallic coatings on steel wire General principles |
| 05/30091555 DC : DRAFT MAY 2005 | ISO 3183 - PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS |
| UNE-EN ISO 16120-3:2012 | Non-alloy steel wire rod for conversion to wire - Part 3: Specific requirements for rimmed and rimmed substitute, low-carbon steel wire rod (ISO 16120-3:2011) |
| ISO 630-1:2011 | Structural steels Part 1: General technical delivery conditions for hot-rolled products |
| ISO 4950-1:1995 | High yield strength flat steel products — Part 1: General requirements |
| UNI EN ISO 16120-3 : 2011 | NON-ALLOY STEEL WIRE ROD FOR CONVERSION TO WIRE - PART 3: SPECIFIC REQUIREMENTS FOR RIMMED AND RIMMED SUBSTITUTE, LOW-CARBON STEEL WIRE ROD |
| IEC 60404-8-4:2013 | Magnetic materials - Part 8-4: Specifications for individual materials - Cold-rolled non-oriented electrical steel strip and sheet delivered in the fully-processed state |
| BS ISO 20332:2016 | Cranes. Proof of competence of steel structures |
| IEC 60404-8-2:1998 | Magnetic materials - Part 8-2: Specifications for individual materials - Cold-rolled electrical alloyed steel sheet and strip delivered in the semi-processed state |
| ISO 6931-2:2005 | Stainless steels for springs Part 2: Narrow strip |
| I.S. EN ISO 16120-3:2011 | NON-ALLOY STEEL WIRE ROD FOR CONVERSION TO WIRE - PART 3: SPECIFIC REQUIREMENTS FOR RIMMED AND RIMMED SUBSTITUTE, LOW-CARBON STEEL WIRE ROD |
| PREN ISO 683-17 : DRAFT 2013 | HEAT-TREATED STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 17: BALL AND ROLLER BEARING STEELS (ISO/DIS 683-17:2013) |
| ISO 3183:2012 | Petroleum and natural gas industries Steel pipe for pipeline transportation systems |
| ISO 2604-5:1978 | Steel products for pressure purposes Quality requirements Part 5: Longitudinally welded austenitic stainless steel tubes |
| ISO 16143-1:2014 | Stainless steels for general purposes Part 1: Corrosion-resistant flat products |
| ISO 630:1995 | Structural steels Plates, wide flats, bars, sections and profiles |
| IEC 60404-8-10:2009 | Magnetic materials - Part 8-10: Specifications for individual materials - Magnetic materials (iron and steel) for use in relays |
| ISO 13270:2013 | Steel fibres for concrete — Definitions and specifications |
| ISO 7778:2014 | Through-thickness characteristics for steel products |
| ISO 559:1991 | Steel tubes for water and sewage |
| ISO 683-13:1974 | Heat-treated steels, alloy steels and free-cutting steels Part 13: Wrought stainless steels |
| ISO 4954:1993 | Steels for cold heading and cold extruding |
| ISO 16020:2005 | Steel for the reinforcement and prestressing of concrete Vocabulary |
| I.S. EN ISO 683-17:2014 | HEAT-TREATED STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 17: BALL AND ROLLER BEARING STEELS (ISO 683-17:2014) |
| DIN ISO 5832-9:2008-12 | IMPLANTS FOR SURGERY - METALLIC MATERIALS - PART 9: WROUGHT HIGH NITROGEN STAINLESS STEEL |
| BS 7252-1:1997 | Metallic materials for surgical implants Specification for wrought stainless steel |
| BS 6362:1990 | Specification for stainless steel tubes suitable for screwing in accordance with BS 21 \'Pipe threads for tubes and fittings where pressure-tight joints are made on the threads\' |
| BS 7252-9:1993 | Metallic materials for surgical implants Specification for high-nitrogen stainless steel |
| 12/30244860 DC : 0 | BS ISO 10474 - METALLIC PRODUCTS - INSPECTION DOCUMENTS |
| 05/30092093 DC : DRAFT JUL 2005 | ISO 24314 - STRUCTURAL STEELS - STEELS FOR SEISMIC IMPROVED RESISTANCE FOR BUILDING |
| API 5CRA : 2010 : INC : ERR 1 : 2011 : R2015 | SPECIFICATION FOR CORROSION-RESISTANT ALLOY SEAMLESS TUBES FOR USE AS CASING, TUBING AND COUPLING STOCK |
| 15/30296029 DC : 0 | BS ISO 4955 - HEAT-RESISTANT STEELS |
| BS 6404-8.4(1986) : 1986 | MAGNETIC MATERIALS - INDIVIDUAL MATERIALS - SPECIFICATION FOR COLD ROLLED NON ORIENTED MAGNETIC STEEL SHEET AND STRIP DELIVERED IN THE FINALLY ANNEALED STATE |
| 11/30197571 DC : 0 | BS ISO 25832-1 - IMPLANTS FOR SURGERY - SEAMLESS TUBES FOR SURGICAL IMPLANTS - PART 1: MATERIALS BASED ON IRON |
| 11/30235499 DC : 0 | BS EN ISO 3183 - PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS |
| BS ISO 16143-3:2014 | Stainless steels for general purposes Wire |
| IEC 60404-8-8:2017 | Magnetic materials - Part 8-8: Specifications for individual materials - Thin electrical steel strip and sheet for use at medium frequencies |
| ISO 2604-6:1978 | Steel products for pressure purposes Quality requirements Part 6: Submerged arc longitudinally or spirally welded steel tubes |
| 12/30250152 DC : 0 | BS ISO 16143-3 - STAINLESS STEELS FOR GENERAL PURPOSES - PART 3: WIRE |
| 14/30295082 DC : 0 | BS ISO 683-3 - HEAT-TREATABLE STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 3: CASE HARDENING STEELS |
| BS ISO 4990:2015 | Steel castings. General technical delivery requirements |
| 17/30347225 DC : 0 | BS EN ISO 9443 - SURFACE QUALITY CLASSES FOR HOT-ROLLED ROUND BARS AND WIRE ROD |
| BS ISO 13270:2013 | Steel fibres for concrete. Definitions and specifications |
| 04/30110587 DC : DRAFT MARCH 2004 | ISO 23717 - STEEL WIRE AND WIRE PRODUCTS - HOSE REINFORCEMENT WIRE |
| ISO 8535-1:2016 | Diesel engines Steel tubes for high-pressure fuel injection pipes Part 1: Requirements for seamless cold-drawn single-wall tubes |
| 16/30338711 DC : 0 | BS IEC 60404-8-6 ED 3.0 - MAGNETIC MATERIALS - PART 8-6: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SOFT MAGNETIC METALLIC MATERIALS |
| 11/30230615 DC : 0 | BS ISO 683-1 - HEAT-TREATABLE STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 1: NON-ALLOY STEELS FOR QUENCHING AND TEMPERING |
| 17/30312468 DC : 0 | BS ISO 15461 - STEEL FORGINGS - TESTING FREQUENCY, SAMPLING CONDITIONS AND TEST METHODS FOR MECHANICAL TESTS |
| NF EN ISO 16120-1 : 2017 | NON-ALLOY STEEL WIRE ROD FOR CONVERSION TO WIRE - PART 1: GENERAL REQUIREMENTS |
| 06/30099306 DC : DRAFT JUN 2006 | BS ISO 5832-9 - IMPLANTS FOR SURGERY - METALLIC MATERIALS - PART 9: WROUGHT HIGH NITROGEN STAINLESS STEEL |
| BS ISO 14661:2000 | Thermal turbines for industrial applications (steam turbines, gas expansion turbines). General requirements |
| 12/30261766 DC : 0 | BS EN 60404-8-4 - MAGNETIC MATERIALS - PART 8-4: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - COLD-ROLLED NON-ORIENTED ELECTRICAL STEEL STRIP AND SHEET DELIVERED IN THE FULLY-PROCESSED STATE |
| API 5L CHINESE : 2012 | SPECIFICATION FOR LINE PIPE |
| BS EN ISO 16120-1:2017 | Non-alloy steel wire rod for conversion to wire General requirements |
| NF ISO 5832-9 : 2007 | IMPLANTS FOR SURGERY - METALLIC MATERIALS - PART 9: WROUGHT HIGH NITROGEN STAINLESS STEEL |
| ISO 15461:2018 | Steel forgings — Testing frequency, sampling conditions and test methods for mechanical tests |
| NF EN ISO 16120-3 : 2011 | NON-ALLOY STEEL WIRE ROD FOR CONVERSION TO WIRE - PART 3: SPECIFIC REQUIREMENTS FOR RIMMED AND RIMMED SUBSTITUTE, LOW CARBON STEEL WIRE ROD |
| ISO 9329-4:1997 | Seamless steel tubes for pressure purposes — Technical delivery conditions — Part 4: Austenitic stainless steels |
| NF EN ISO 4957 : 2000 | TOOL STEELS |
| ISO 4951-2:2001 | High yield strength steel bars and sections — Part 2: Delivery conditions for normalized, normalized rolled and as-rolled steels |
| ISO 4952:2006 | Structural steels with improved atmospheric corrosion resistance |
| ISO 1052:1982 | Steels for general engineering purposes |
| ISO 9330-1:1990 | Welded steel tubes for pressure purposes — Technical delivery conditions — Part 1: Unalloyed steel tubes with specified room temperature properties |
| ISO 9329-3:1997 | Seamless steel tubes for pressure purposes — Technical delivery conditions — Part 3: Unalloyed and alloyed steels with specified low temperature properties |
| ISO 3183-1:1996 | Petroleum and natural gas industries — Steel pipe for pipelines — Technical delivery conditions — Part 1: Pipes of requirement class A |
| ISO 6930-1:2001 | High yield strength steel plates and wide flats for cold forming Part 1: Delivery conditions for thermomechanically-rolled steels |
| ISO 5832-1:2016 | Implants for surgery — Metallic materials — Part 1: Wrought stainless steel |
| ISO 9329-1:1989 | Seamless steel tubes for pressure purposes — Technical delivery conditions — Part 1: Unalloyed steels with specified room temperature properties |
| ISO 7900:2006 | Steel wire and wire products for fences Zinc- and zinc-alloy-coated steel barbed wire |
| ISO 9330-3:1997 | Welded steel tubes for pressure purposes — Technical delivery conditions — Part 3: Electric resistance and induction welded unalloyed and alloyed steel tubes with specified low temperature properties |
| IEC 60404-8-5:1989 | Magnetic materials. Part 8: Specifications for individual materials. Section Five: Specification for steel sheet and strip with specified mechanical properties and magnetic permeability |
| ISO 3183-3:1999 | Petroleum and natural gas industries — Steel pipe for pipelines — Technical delivery conditions — Part 3: Pipes of requirement class C |
| ISO 6931-1:2016 | Stainless steels for springs Part 1: Wire |
| ISO 14661:2000 | Thermal turbines for industrial applications (steam turbines, gas expansion turbines) General requirements |
| ISO 683-16:1976 | Heat-treated steels, alloy steels and free-cutting steels — Part 16: Precipitation hardening stainless steels |
| ISO 5832-9:2007 | Implants for surgery Metallic materials Part 9: Wrought high nitrogen stainless steel |
| DIN EN ISO 683-17:2015-02 | Heat-treated steels, alloy steels and free-cutting steels - Part 17: Ball and roller bearing steels (ISO 683-17:2014) |
| ONORM EN ISO 13680 : 2010 | PETROLEUM AND NATURAL GAS INDUSTRIES - CORROSION-RESISTANT ALLOY SEAMLESS TUBES FOR USE AS CASING, TUBING AND COUPLING STOCK - TECHNICAL DELIVERY CONDITIONS |
| UNI EN ISO 13680 : 2010 | PETROLEUM AND NATURAL GAS INDUSTRIES - CORROSION-RESISTANT ALLOY SEAMLESS TUBES FOR USE AS CASING, TUBING AND COUPLING STOCK - TECHNICAL DELIVERY CONDITIONS |
| EN ISO 13680:2010 | Petroleum and natural gas industries - Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock - Technical delivery conditions (ISO 13680:2010) |
| UNI EN ISO 683-17 : 2014 | HEAT-TREATED STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 17: BALL AND ROLLER BEARING STEELS |
| ISO 24314:2006 | Structural steels Structural steels for building with improved seismic resistance Technical delivery conditions |
| 16/30347251 DC : 0 | BS EN 60404-8-11 ED 1.0 - MAGNETIC MATERIALS - PART 8-11: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - FE-BASED AMORPHOUS STRIP DELIVERED IN THE SEMI-PROCESSED STATE |
| ISO 20332:2016 | Cranes Proof of competence of steel structures |
| ISO 9330-5:2000 | Welded steel tubes for pressure purposes — Technical delivery conditions — Part 5: Submerged arc-welded unalloyed and alloyed steel tubes with specified low temperature properties |
| BS ISO 14654:1999 | Epoxy-coated steel for the reinforcement of concrete |
| 14/30284697 DC : 0 | BS ISO 683-5 - HEAT TREATABLE STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 5: NITRIDING STEELS |
| BS 6404-8.2(1986) : 1986 | MAGNETIC MATERIALS - INDIVIDUAL MATERIALS - SPECIFICATION FOR COLD ROLLED MAGNETIC NON ORIENTED ALLOYED STEEL STRIP DELIVERED IN THE SEMI PROCESSED STATE |
| BS ISO 16143-2:2014 | Stainless steels for general purposes Corrosion-resistant semi-finished products, bars, rods and sections |
| 10/30215691 DC : DRAFT NOV 2010 | BS ISO 8535-1 - DIESEL ENGINES - STEEL TUBES FOR HIGH-PRESSURE FUEL INJECTION PIPES - PART 1: REQUIREMENTS FOR SEAMLESS COLD-DRAWN SINGLE-WALL TUBES |
| ISO 20723:2004 | Structural steels Surface condition of hot-rolled sections Delivery requirements |
| 04/30109383 DC : DRAFT MAY 2004 | ISO 8535-1 - COMPRESSION-IGNITION ENGINES - STEEL TUBES FOR HIGH-PRESSURE FUEL INJECTION PIPES - PART 1: REQUIREMENTS FOR SEAMLESS COLD-DRAWN SINGLE-WALL TUBES |
| BS 6404-8.3(1986) : 1986 | MAGNETIC MATERIALS - INDIVIDUAL MATERIALS - SPECIFICATION FOR COLD ROLLED MAGNETIC NON ORIENTED NON ALLOYED STEEL STRIP DELIVERED IN THE SEMI PROCESSED STATE |
| 12/30250146 DC : 0 | BS ISO 16143-1 - STAINLESS STEELS FOR GENERAL PURPOSES - PART 1: FLAT PRODUCTS |
| BS ISO 23717:2006 | Steel wire and wire products. Hose reinforcement wire |
| BS ISO 3183-3:1999 | Petroleum and natural gas industries. Steel pipe for pipelines. Technical delivery conditions Pipes of requirement class C |
| 13/30248090 DC : 0 | BS ISO 11951 - COLD-REDUCED BLACKPLATE IN COIL FORM FOR THE PRODUCTION OF TINPLATE OR ELECTROLYTIC CHROMIUM/CHROMIUM OXIDE-COATED STEEL |
| DIN EN ISO 16120-1:2017-09 | NON-ALLOY STEEL WIRE ROD FOR CONVERSION TO WIRE - PART 1: GENERAL REQUIREMENTS (ISO 16120-1:2017) |
| 03/314809 DC : DRAFT SEP 2003 | EN ISO 13680 - PETROLEUM AND NATURAL GAS INDUSTRIES - CORROSION-RESISTANT ALLOY SEAMLESS TUBES FOR USE AS CASING, TUBING AND COUPLING STOCK - TECHNICAL DELIVERY CONDITIONS |
| 04/301144 DC : DRAFT JAN 2004 | ISO 6931-2 - STAINLESS STEELS FOR SPRINGS - PART 2: NARROW STRIP |
| BS ISO 16020:2005 | Steel for the reinforcement and prestressing of concrete. Vocabulary |
| 11/30230612 DC : 0 | BS ISO 683-11 - HEAT-TREATABLE STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 11: CASE-HARDENING STEELS |
| 03/115881 DC : DRAFT OCT 2003 | ISO 20723 - STRUCTURAL STEELS - SURFACE CONDITION OF HOT-ROLLED SECTIONS - DELIVERY REQUIREMENTS |
| I.S. EN 60404-8-6:2017 | MAGNETIC MATERIALS - PART 8-6: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SOFT MAGNETIC METALLIC MATERIALS |
| BS EN 60404-8-6:2017 | Magnetic materials Specifications for individual materials. Soft magnetic metallic materials |
| ISO 10799-1:2011 | Cold-formed welded structural hollow sections of non-alloy and fine grain steels — Part 1: Technical delivery conditions |
| ISO 683-9:1988 | Heat-treatable steels, alloy steels and free-cutting steels Part 9: Wrought free-cutting steels |
| ISO 10799:2001 | Structural steels Cold-formed, welded, structural hollow sections Technical delivery requirements |
| API SPEC 5CRA : 2010 | SPECIFICATION FOR CORROSION-RESISTANT ALLOY SEAMLESS TUBES FOR USE AS CASING, TUBING AND COUPLING STOCK |
| ISO 4951-3:2001 | High yield strength steel bars and sections — Part 3: Delivery conditions for thermomechanically-rolled steels |
| ISO/TR 11637:1997 | Boron treated engineering steels for quenching and tempering |
| ISO 10474:2013 | Steel and steel products — Inspection documents |
| ISO 683-18:2014 | Heat-treatable steels, alloy steels and free-cutting steels — Part 18: Bright steel products |
| ISO 2938:1974 | Hollow steel bars for machining |
| ISO 4951:1979 | High yield strength steel bars and sections |
| ASTM F 3160 : 2016 | Standard Guide for Metallurgical Characterization of Absorbable Metallic Materials for Medical Implants |
| ISO 5003:2016 | Flat bottom (Vignole) railway rails 43 kg/m and above |
| ISO 4990:2015 | Steel castings — General technical delivery requirements |
| ISO 16143-2:2014 | Stainless steels for general purposes Part 2: Corrosion-resistant semi-finished products, bars, rods and sections |
| ISO 4955:2016 | Heat-resistant steels |
| IEC 60404-8-7:2017 | Magnetic materials - Part 8-7: Specifications for individual materials - Cold-rolled grain-oriented electrical steel strip and sheet delivered in the fully processed state |
| IEC 60404-8-3:2005 | Magnetic materials - Part 8-3: Specifications for individual materials - Cold-rolled electrical non-alloyed and alloyed steel sheet and strip delivered in the semi-processed state |
| ISO 683-11:2012 | Heat-treatable steels, alloy steels and free-cutting steels Part 11: Case-hardening steels |
| ISO 6930-2:2004 | High yield strength steel plates and wide flats for cold forming Part 2: Delivery condition for normalized, normalized rolled and as-rolled steels |
| ISO 4957:1999 | Tool steels |
| ONORM EN ISO 3183 : 2013 | PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS (ISO 3183:2012) |
| BS EN ISO 13680:2010 | Petroleum and natural gas industries. Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock Technical delivery conditions |
| ISO 13680:2010 | Petroleum and natural gas industries Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock Technical delivery conditions |
| ISO 16120-3:2011 | Non-alloy steel wire rod for conversion to wire — Part 3: Specific requirements for rimmed and rimmed substitute, low-carbon steel wire rod |
| IEC 60404-8-6:2016 | Magnetic materials - Part 8-6: Specifications for individual materials - Soft magnetic metallic materials |
| ISO 16120-1:2017 | Non-alloy steel wire rod for conversion to wire — Part 1: General requirements |
| BS EN ISO 683-17:2014 | Heat-treated steels, alloy steels and free-cutting steels Ball and roller bearing steels |
| ISO 683-17:2014 | Heat-treated steels, alloy steels and free-cutting steels — Part 17: Ball and roller bearing steels |
| UNE-EN ISO 683-17:2015 | Heat-treated steels, alloy steels and free-cutting steels - Part 17: Ball and roller bearing steels (ISO 683-17:2014) |
| EN ISO 683-17:2014 | Heat-treated steels, alloy steels and free-cutting steels - Part 17: Ball and roller bearing steels (ISO 683-17:2014) |
| I.S. EN ISO 16120-1:2017 | NON-ALLOY STEEL WIRE ROD FOR CONVERSION TO WIRE - PART 1: GENERAL REQUIREMENTS (ISO 16120-1:2017) |
| 05/30128476 DC : DRAFT JAN 2005 | ISO 7989-1 - STEEL WIRE AND WIRE PRODUCTS - NON-FERROUS METALLIC COATINGS ON STEEL WIRE - PART 1: GENERAL PRINCIPLES |
| 04/300984 DC : DRAFT JAN 2004 | BS ISO 4955 - HEAT-RESISTING STEELS |
| 16/30339983 DC : 0 | BS ISO 8535-1 - DIESEL ENGINES - STEEL TUBES FOR HIGH-PRESSURE FUEL INJECTION PIPES - PART 1: REQUIREMENTS FOR SEAMLESS COLD-DRAWN SINGLE-WALL TUBES |
| 06/30099300 DC : DRAFT JUN 2006 | BS ISO 5832-1 - IMPLANTS FOR SURGERY - METALLIC MATERIALS - PART 1: WROUGHT STAINLESS STEEL |
| 17/30346747 DC : 0 | BS ISO 9328-1 - STEEL FLAT PRODUCTS FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 1: GENERAL REQUIREMENTS |
| 14/30248087 DC : 0 | BS ISO 11950 - COLD-REDUCED ELECTROLYTIC CHROMIUM/CHROMIUM OXIDE-COATED STEEL |
| BS 6404-8.10:1995 | Magnetic materials. Individual materials Specification for magnetic materials (iron and steel) for use in relays |
| 14/30258987 DC : 0 | BS ISO 6935-2 - STEEL FOR THE REINFORCEMENT OF CONCRETE - PART 2: RIBBED BARS |
| ISO 6935-2:2015 | Steel for the reinforcement of concrete Part 2: Ribbed bars |
| 17/30337413 DC : 0 | BS EN ISO 4957 - TOOL STEELS |
| BS ISO 683-5:2017 | Heat treatable steels, alloy steels and free-cutting steels Nitriding steels |
| API 5CRA CHINESE : 2011 | SPECIFICATION FOR CORROSION RESISTANT ALLOY SEAMLESS TUBES FOR USE AS CASING, TUBING AND COUPLING STOCK |
| PD ISO/TS 7705:2017 | Guidelines for specifying Charpy V-notch impact prescriptions in steel specifications |
| 13/30256266 DC : 0 | BS ISO 683-18 - HEAT-TREATABLE STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 18: BRIGHT STEEL PRODUCTS |
| BS EN ISO 3183 : 2012 | PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS |
| NFS 94 051 : 2000 | IMPLANTS FOR SURGERY - METALLIC MATERIALS - WROUGHT STAINLESS STEEL |
| 97/703009 DC : 0 | PREN 10208-3 - PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 3: PIPES OF REQUIREMENT CLASS C |
| BS ISO 5832-9:2007 | Implants for surgery. Metallic materials Wrought high nitrogen stainless steel |
| BS 6362:1984 | Specification for stainless steel tubes suitable for screwing in accordance with BS 21 \'Pipe threads for tubes and fittings where pressure-tight joints are made on the threads\' |
| ISO 6930:1983 | High yield strength flat steel products for cold forming |
| ISO 2604-1:1975 | Steel products for pressure purposes Quality requirements Part 1: Forgings |
| UNI EN ISO 3183 : 2012 | PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS |
| ISO 9329-2:1997 | Seamless steel tubes for pressure purposes — Technical delivery conditions — Part 2: Unalloyed and alloyed steels with specified elevated temperature properties |
| ISO 8458-1:2002 | Steel wire for mechanical springs Part 1: General requirements |
| ISO 22034-1:2007 | Steel wire and wire products — Part 1: General test methods |
| ISO 2604-2:1975 | Steel products for pressure purposes Quality requirements Part 2: Wrought seamless tubes |
| NF ISO 8535-1 : 1992 | COMPRESSION-IGNITION ENGINES - STEEL TUBES FOR HIGH-PRESSURE FUEL INJECTION PIPES - PART 1: REQUIREMENTS FOR SEAMLESS COLD-DRAWN SINGLE-WALL TUBES |
| ISO 12633-1:2011 | Hot-finished structural hollow sections of non-alloy and fine grain steels — Part 1: Technical delivery conditions |
| ISO 16143-3:2014 | Stainless steels for general purposes Part 3: Wire |
| ISO 3183-2:1996 | Petroleum and natural gas industries — Steel pipe for pipelines — Technical delivery conditions — Part 2: Pipes of requirements class B |
| ISO 8457-2:1989 | Steel wire rod Part 2: Quality requirements for unalloyed steel wire rods for conversion to wire |
| EN ISO 4957:1999 | Tool steels (ISO 4957:1999) |
| ISO 683-5:2017 | Heat treatable steels, alloy steels and free-cutting steels — Part 5: Nitriding steels |
| ISO 683-15:1992 | Heat-treatable steels, alloy steels and free-cutting steels — Part 15: Valve steels for internal combustion engines |
| ISO 683-10:1987 | Heat-treatable steels, alloy steels and free-cutting steels Part 10: Wrought nitriding steels |
| ISO 8535-2:2003 | Compression-ignition engines Steel tubes for high-pressure fuel injection pipes Part 2: Requirements for composite tubes |
| ISO 7989-1:2006 | Steel wire and wire products Non-ferrous metallic coatings on steel wire Part 1: General principles |
| BS EN ISO 4957:2000 | Tool steels |
| EN ISO 16120-3:2011 | Non-alloy steel wire rod for conversion to wire - Part 3: Specific requirements for rimmed and rimmed substitute, low-carbon steel wire rod (ISO 16120-3:2011) |
| DIN EN ISO 16120-3:2011-10 | Non-alloy steel wire rod for conversion to wire - Part 3: Specific requirements for rimmed and rimmed substitute, low-carbon steel wire rod (ISO 16120-3:2011) |
| NBR 13911 : 2013 | SURGICAL INSTRUMENTS - METALLIC MATERIAL - SPECIFICATIONS FOR WROUGHT STAINLESS STEEL |
| ONORM EN ISO 683-17 : 2015 | HEAT-TREATED STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 17: BALL AND ROLLER BEARING STEELS (ISO 683-17:2014) |
| ISO 6507-1:2005 | Metallic materials Vickers hardness test Part 1: Test method |
| ISO 6929:2013 | Steel products — Vocabulary |
| ISO 6506-1:2014 | Metallic materials Brinell hardness test Part 1: Test method |
| ISO/TR 9769:1991 | Steel and iron Review of available methods of analysis |
| ISO 642:1999 | Steel — Hardenability test by end quenching (Jominy test) |
| ISO 4489:1978 | Sintered hardmetals Sampling and testing |
| ISO 6508-1:2016 | Metallic materials — Rockwell hardness test — Part 1: Test method |
| ISO 6892-1:2016 | Metallic materials Tensile testing Part 1: Method of test at room temperature |
| ISO 148-1:2016 | Metallic materials — Charpy pendulum impact test — Part 1: Test method |
| ISO 4948-1:1982 | Steels Classification Part 1: Classification of steels into unalloyed and alloy steels based on chemical composition |
| ISO 7438:2016 | Metallic materials Bend test |
| ISO 3651-2:1998 | Determination of resistance to intergranular corrosion of stainless steels — Part 2: Ferritic,austenitic and ferritic-austenitic (duplex) stainless steels — Corrosion test in media containing sulfuric acid |
| ISO 7788:1985 | Steel — Surface finish of hot-rolled plates and wide flats — Delivery requirements |
| ISO 10474:2013 | Steel and steel products — Inspection documents |
| ISO 3651-1:1998 | Determination of resistance to intergranular corrosion of stainless steels — Part 1: Austenitic and ferritic-austenitic (duplex) stainless steels — Corrosion test in nitric acid medium by measurement of loss in mass (Huey test) |
| ISO 80000-1:2009 | Quantities and units — Part 1: General |
| ISO 9001:2015 | Quality management systems — Requirements |
| ISO 4948-2:1981 | Steels Classification Part 2: Classification of unalloyed and alloy steels according to main quality classes and main property or application characteristics |
| ISO 6892-2:2011 | Metallic materials Tensile testing Part 2: Method of test at elevated temperature |
| ISO 377:2017 | Steel and steel products — Location and preparation of samples and test pieces for mechanical testing |
| ISO 14284:1996 | Steel and iron — Sampling and preparation of samples for the determination of chemical composition |
| ISO 9443:1991 | Heat-treatable and alloy steels Surface quality classes for hot-rolled round bars and wire rods Technical delivery conditions |
| ISO 3954:2007 | Powders for powder metallurgical purposes Sampling |
| ISO 4990:2015 | Steel castings — General technical delivery requirements |
$180.92
Including GST where applicable
AUD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - English
PDF 1 User - English
PDF 3 Users - English
PDF 5 Users - English
PDF 9 Users - English
Hardcopy - English
PDF 1 User - English
PDF 3 Users - English
PDF 5 Users - English
PDF 9 Users - English
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.