Guide to the choice of series of preferred numbers and of series containing more rounded values of preferred numbers

Available format(s)

Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users

Language(s)

English, French

Published date

01-05-1973

Publisher

International Organization for Standardization

This is an additional guide to ISO 17 for selecting specified series with more rounded values. It shows the conditions for the use of these preferred numbers.

DocumentType	Standard
Pages	7
PublisherName	International Organization for Standardization
Status	Current

Standards	Relationship
AS 2752-1985	Identical
BS 2045:1965	Identical
UNE 37104:1981	Identical
BIS IS 1076-3 : 1985(R2016)	Identical
PN ISO 497 : 2002	Identical
NS 379 : 2ED 1972	Similar to
NBN C 86 010 : 1984	Identical
AS 2751 SUPP 2-1989	Identical

BS 5724-2-45(2001) : 2001	MEDICAL ELECTRICAL EQUIPMENT - PART 2-45: PARTICULAR REQUIREMENTS FOR THE SAFETY OF MAMMOGRAPHIC X-RAY EQUIPMENT AND MAMMOGRAPHIC STEREOTACTIC DEVICES
12/30255878 DC : 0	BS ISO 17885 - PLASTICS PIPING SYSTEMS - MECHANICAL FITTINGS FOR PRESSURE PIPING SYSTEMS - SPECIFICATIONS
08/30092426 DC : DRAFT JULY 2008	BS ISO 12162 - THERMOPLASTICS MATERIALS FOR PIPES AND FITTINGS FOR PRESSURE APPLICATIONS - CLASSIFICATION, DESIGNATION COEFFICIENT, AND DESIGNATION
BS EN ISO 11299-3:2013	Plastics piping systems for renovation of underground gas supply networks Lining with close-fit pipes
UNI EN ISO 21003-1 : 2009	MULTILAYER PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS INSIDE BUILDINGS - PART 1: GENERAL
08/30174014 DC : DRAFT JUNE 2008	BS ISO 11298-3 - PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND WATER SUPPLY NETWORKS - PART 3: LINING WITH CLOSE-FIT-PIPES
BS ISO 16877:2015	Round steel short link chains for lifting purposes. Fine tolerance hoist chains for hand operated chain hoists. Grade TH
PD R086-001:2000	Guidance for technology audit of fibre optic connector kits and terminated connectors
ISO 4393:2015	Fluid power systems and components Cylinders Basic series of piston strokes
17/30351670 DC : 0	BS ISO 4065 - THERMOPLASTICS PIPES - UNIVERSAL WALL THICKNESS TABLE
BS EN ISO 11298-3:2011	Plastics piping systems for renovation of underground water supply networks Lining with close-fit pipes
17/30363845 DC : 0	BS ISO 21927-3 - SMOKE AND HEAT CONTROL SYSTEMS - PART 3: SPECIFICATION FOR POWERED SMOKE AND HEAT EXHAUST VENTILATORS
09/30170496 DC : 0	BS EN 60601-2-45 - MEDICAL ELECTRICAL EQUIPMENT - PART 2-45: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF MAMMOGRAPHIC X-RAY EQUIPMENT AND MAMMOGRAPHIC STEREOTACTIC DEVICES
BS EN 62358 : 2012	FERRITE CORES - STANDARD INDUCTANCE FACTOR FOR GAPPED CORES AND ITS TOLERANCE
I.S. EN 125000:1999	CORES MADE FROM FERRITE MATERIALS (GENERIC SPECIFICATION)
UNE-EN ISO 15494:2016	Plastics piping systems for industrial applications - Polybutene (PB), polyethylene (PE), polyethylene of raised temperature resistance (PE-RT), crosslinked polyethylene (PE-X), polypropylene (PP) - Metric series for specifications for components and the system (ISO 15494:2015)
BS ISO 8085-3:2001	Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels. Metric series. Specifications Electrofusion fittings
BS ISO 6580:2005	General-purpose industrial fans. Circular flanges. Dimensions
DIN EN 138000 : 1997	GENERIC SPECIFICATION; FIXED INDUCTORS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION (INDUCTORS FOR WHICH SAFETY TESTS ARE REQUIRED)
DIN ISO 16486-1:2015-07	Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing - Part 1: General (ISO 16486-1:2012 + AMD 1:2014)
12/30257534 DC : 0	BS ISO 18225 - PLASTICS PIPING SYSTEMS - MULTILAYER PIPING SYSTEMS FOR OUTDOOR GAS INSTALLATIONS - SPECIFICATIONS FOR SYSTEMS
I.S. EN ISO 11299-3:2013	PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND GAS SUPPLY NETWORKS - PART 3: LINING WITH CLOSE-FIT PIPES (ISO 11299-3:2011)
BS EN ISO 13351:2009	Fans. Dimensions
04/30126883 DC : DRAFT DEC 2004	ISO 4437 - BURIED POLYETHYLENE (PE) PIPES FOR THE SUPPLY OF GASEOUS FUELS - METRIC SERIES - SPECIFICATIONS
08/30172449 DC : DRAFT APR 2008	BS ISO 8779 - PLASTICS PIPING SYSTEMS - POLYETHYLENE (PE) PIPES FOR IRRIGATION - SPECIFICATIONS
BS 8588:2017	Polyethylene pressure pipe with an aluminium barrier layer and associated fittings for potable water supply in contaminated land. Size 20 mm to 630 mm
06/30107360 DC : 0	IEC 60601-1-3 - MEDICAL ELECTRICAL EQUIPMENT - PART 1-3: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD - RADIATION PROTECTION IN DIAGNOSTIC X-RAY EQUIPMENT
05/30132152 DC : DRAFT APR 2005	ISO 21004 - PLASTICS PIPING SYSTEMS - MULTILAYER PIPES AND THEIR JOINTS, BASED ON THERMOPLASTICS, FOR WATER SUPPLY
I.S. EN 153000:1998	DISCRETE PRESSURE CONTACT POWER SEMICONDUCTOR DEVICES (QUALIFICATION APPROVAL) (GENERIC SPECIFICATION)
EN 1555-1:2010	Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 1: General
BIS IS 13450-1-3 : 2014	MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - SECTION 3: COLLATERAL STANDARD: RADIATION PROTECTION IN DIAGNOSTIC X-RAY EQUIPMENT
ISO 4783-3:1981	Industrial wire screens and woven wire cloth — Guide to the choice of aperture size and wire diameter combinations — Part 3: Preferred combinations for pre-crimped or pressure-welded wire screens
S.R. CEN/TS 15223:2017	PLASTICS PIPING SYSTEMS - VALIDATED DESIGN PARAMETERS OF BURIED THERMOPLASTICS PIPING SYSTEMS
UNI EN ISO 11299-3 : 2013	PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND GAS SUPPLY NETWORKS - PART 3: LINING WITH CLOSE-FIT PIPES
ISO 4437-1:2014	Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) — Part 1: General
IEC 61253-1:1993	Piezoelectric ceramic resonators - A specification in the IEC quality assessment system for electronic components (IECQ) - Part 1: Generic specification - Qualification approval
ISO 11298-3:2010	Plastics piping systems for renovation of underground water supply networks Part 3: Lining with close-fit pipes
ISO 17484-1:2014	Plastics piping systems Multilayer pipe systems for indoor gas installations with a maximum operating pressure up to and including 5 bar (500 kPa) Part 1: Specifications for systems
UNE-EN ISO 11298-3:2011	Plastics piping systems for renovation of underground water supply networks - Part 3: Lining with close-fit pipes (ISO 11298-3:2010)
ISO 6580:2005	General-purpose industrial fans Circular flanges Dimensions
UNI EN 1555-1 : 2011	PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - POLYETHYLENE (PE) - PART 1: GENERAL
DIN EN 12007-2:2012-10	GAS INFRASTRUCTURE - PIPELINES FOR MAXIMUM OPERATING PRESSURE UP TO AND INCLUDING 16 BAR - PART 2: SPECIFIC FUNCTIONAL REQUIREMENTS FOR POLYETHYLENE (MOP UP TO AND INCLUDING 10 BAR)
DIN EN 12201-1:2011-11	Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 1: General
BS EN 818-3 : 1999	SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 3: MEDIUM TOLERANCE CHAIN FOR CHAIN SLINGS - GRADE 4
BS EN 13244-1:2002	Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage. Polyethylene (PE) General
BS EN 1555-1:2010	Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE) General
IEC 60601-2-44:2009+AMD1:2012+AMD2:2016 CSV	Medical electrical equipment - Part 2-44: Particular requirements for the basic safety and essential performance of X-ray equipment for computed tomography
EN 125000:1997	Generic Specification: Cores made of ferrite materials
EN 60601-2-7:1998	Medical electrical equipment - Part 2-7: Particular requirements for the safety of high-voltage generators of diagnostic X-ray generators
EN 12201-1:2011	Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 1: General
EN 153000:1998	Generic specification: Discrete pressure contact power semiconductor devices (Qualification approval)
DIN EN 1452-1:1999-09	PLASTICS PIPING SYSTEMS FOR WATER SUPPLY - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: GENERAL
DIN EN 13244-1:2003-04	PLASTICS PIPING SYSTEMS FOR BURIED AND ABOVE-GROUND PRESSURE SYSTEMS FOR WATER FOR GENERAL PURPOSES, DRAINAGE AND SEWERAGE - POLYETHYLENE (PE) - PART 1: GENERAL
EN 134000:1994	Generic Specification: Variable capacitors (Qualification approval and capability approval)
EN 13244-1:2002	Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage - Polyethylene (PE) - Part 1: General
DIN EN 562:2003-09	GAS WELDING EQUIPMENT - PRESSURE GAUGES USED IN WELDING, CUTTING AND ALLIED PROCESSES
EN 129000:1993/A1:1995	GENERIC SPECIFICATION - FIXED RF WOUND INDUCTORS
EN 12007-2:2012	Gas infrastructure - Pipelines for maximum operating pressure up to and including 16 bar - Part 2: Specific functional requirements for polyethylene (MOP up to and including 10 bar)
EN 133000:1997	Generic Specification: Passive filter units for electromagnetic interference suppression
01/123802 DC : DRAFT OCT 2001	BS ISO 14531-2 - PLASTICS PIPES AND FITTINGS - CROSSLINKED POLYETHYLENE (PE-X) PIPE SYSTEMS FOR THE TRANSPORT OF GASEOUS FUELS - METRIC SERIES - SPECIFICATIONS - PART 2: FITTINGS FOR HEAT FUSION JOINTING
14/30268499 DC : 0	BS ISO 16872 - ROUND STEEL SHORT LINK CHAINS FOR LIFTING PURPOSES - FINE TOLERANCE HOIST CHAINS FOR HAND OPERATED CHAIN HOISTS - GRADE VH
BS CECC 25000:1977	Specification for harmonized system of quality assessment for electronic components: generic specification: inductor and transformer cores for telecommunications
13/30212494 DC : 0	BS EN ISO 15494 - PLASTICS PIPING SYSTEMS FOR INDUSTRIAL APPLICATIONS - POLYBUTENE (PB), POLYETHYLENE (PE) AND POLYPROPYLENE (PP) - SPECIFICATIONS FOR COMPONENTS AND THE SYSTEM - METRIC SERIES
07/30173191 DC : 0	BS ISO 5171 - GAS WELDING EQUIPMENT - PRESSURE GAUGES USED IN WELDING, CUTTING AND ALLIED PROCESSES
BS EN 129000:1996	Harmonized system of quality assessment for electronic components. Generic specification. Fixed RF wound inductors
02/121564 DC : DRAFT APR 2002	BS EN 14409-3 - PLASTICS PIPING SYSTEMS FOR THE RENOVATION OF UNDERGROUND WATER SUPPLY NETWORKS - PART 3: LINING WITH CLOSE FIT-PIPES
I.S. EN 14408-3:2004	PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND GAS SUPPLY NETWORKS - PART 3: LINING WITH CLOSE-FIT PIPES
I.S. EN 14409-3:2004	PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND WATER SUPPLY NETWORKS - PART 3: LINING WITH CLOSE FIT-PIPES
I.S. EN 13244-1:2002	PLASTICS PIPING SYSTEMS FOR BURIED AND ABOVE-GROUND PRESSURE SYSTEMS FOR WATER FOR GENERAL PURPOSES DRAINAGE AND SEWERAGE - POLYETHYLENE (PE) - GENERAL
04/30126864 DC : DRAFT DEC 2004	ISO 18225 - PLASTIC PIPING SYSTEMS - MULTILAYER PIPING SYSTEMS FOR OUTDOOR GAS INSTALLATIONS - SPECIFICATIONS FOR SYSTEMS
ISO 16872:2015	Round steel short link chains for lifting purposes Fine tolerance hoist chains for hand operated chain hoists Grade VH
18/30364236 DC : 0	BS ISO 1835 - ROUND STEEL SHORT LINK CHAINS FOR LIFTING PURPOSES - MEDIUM TOLERANCE SLING CHAINS - GRADE 4, STAINLESS STEEL
BS EN 60601-2-44 : 2009	MEDICAL ELECTRICAL EQUIPMENT - PART 2-44: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF X-RAY EQUIPMENT FOR COMPUTED TOMOGRAPHY (IEC 60601-2-44:2009)
04/30126871 DC : DRAFT DEC 2004	ISO 17484-1 - PLASTICS PIPING SYSTEMS - MULTI-LAYERED PIPE SYSTEMS FOR INDOOR GAS INSTALLATIONS WITH A MAXIMUM OPERATING PRESSURE UP TO AND INCLUDING 5 BAR - PART 1: SPECIFICATIONS FOR SYSTEMS
02/121566 DC : DRAFT APR 2002	BS EN 14408-3 - PLASTICS PIPING SYSTEMS FOR THE RENOVATION OF UNDERGROUND GAS SUPPLY NETWORKS - PART 3: LINING WITH CLOSE-FIT PIPES
08/30191187 DC : DRAFT OCT 2008	BS EN 62358 - FERRITE CORES - STANDARD INDUCTANCE FACTOR (AL) AND ITS TOLERANCE
ISO 19899:2010	Plastics piping systems Polyolefin pipes and mechanical fitting assemblies Test method for the resistance to end load (AREL test)
BS 2782-11:Method 1121C:1997	Methods of testing plastics. Thermoplastics pipes, fittings and valves Thermoplastics pipes for the conveyance of fluids. Nominal outside diameters and nominal pressures. Inch-based series
BS EN 137000:1996	Harmonized system of quality assessment for electronic components. Generic specification: Fixed aluminium electrolytic a.c. capacitors with non-solid electrolyte for use with motors
ISO 17467-1:2012	Plastics piping systems for the supply of gaseous fuels Unplasticized polyamide (PA-U) piping systems jointed by solvent cement Part 1: General
CEI EN 62358 : 2013	FERRITE CORES - STANDARD INDUCTANCE FACTOR FOR GAPPED CORES AND ITS TOLERANCE
DIN EN ISO 13351:2011-11	Fans - Dimensions (ISO 13351:2009)
DIN EN 60601-2-7 : 2000	MEDICAL ELECTRICAL EQUIPMENT - PART 2-7: PARTICULAR REQUIREMENTS FOR THE SAFETY OF HIGH-VOLTAGE GENERATORS OF DIAGNOSTIC X-RAY GENERATORS
DIN EN ISO 11299-3 E : 2013	PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND GAS SUPPLY NETWORKS - PART 3: LINING WITH CLOSE-FIT PIPES (ISO 11299-3:2011)
CSA Z234.3 : 1989	GUIDE FOR THE SELECTION AND USE OF PREFERRED NUMBERS
BS EN ISO 15494:2015	Plastics piping systems for industrial applications. Polybutene (PB), polyethylene (PE), polyethylene of raised temperature resistance (PE-RT), crosslinked polyethylene (PE-X), polypropylene (PP). Metric series for specifications for components and the system
BS EN 138000:1997	Harmonized system of quality assessment for electronic components. Generic specification: fixed inductors for electromagnetic interference suppression (inductors for which safety tests are required)
ISO 4065:2018	Thermoplastics pipes — Universal wall thickness table
ISO 4437:2007	Buried polyethylene (PE) pipes for the supply of gaseous fuels Metric series Specifications
EN ISO 11297-3:2013	PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND DRAINAGE AND SEWERAGE NETWORKS UNDER PRESSURE - PART 3: LINING WITH CLOSE-FIT PIPES (ISO 11297-3:2013)
I.S. EN ISO 11297-3:2013	PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND DRAINAGE AND SEWERAGE NETWORKS UNDER PRESSURE - PART 3: LINING WITH CLOSE-FIT PIPES (ISO 11297-3:2013)
IEC TS 62398:2004	Ferrite cores - Technology approval schedule (TAS)
ISO 8085-1:2001	Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels Metric series Specifications Part 1: Fittings for socket fusion using heated tools
NF EN ISO 5171 : 2010	GAS WELDING EQUIPMENT - PRESSURE GAUGES USED IN WELDING, CUTTING AND ALLIED PROCESSES
DIN EN ISO 11297-3:2013-11	PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND DRAINAGE AND SEWERAGE NETWORKS UNDER PRESSURE - PART 3: LINING WITH CLOSE-FIT PIPES (ISO 11297-3:2013)
UNE-EN ISO 11297-3:2014	Plastics piping systems for renovation of underground drainage and sewerage networks under pressure - Part 3: Lining with close-fit pipes (ISO 11297-3:2013)
UNE-EN ISO 11299-3:2014	Plastics piping systems for renovation of underground gas supply networks - Part 3: Lining with close-fit pipes (ISO 11299-3:2011)
ISO 22621-1:2007	Plastics piping systems for the supply of gaseous fuels for maximum operating pressures up to and including 2 MPa (20 bar) Polyamide (PA) Part 1: General
ISO 17885:2015	Plastics piping systems Mechanical fittings for pressure piping systems Specifications
BS EN ISO 12162:2009	Thermoplastics materials for pipes and fittings for pressure applications. Classification, designation and design coefficient
I.S. EN 818-3:1999	SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 3: MEDIUM TOLERANCE CHAIN FOR CHAIN SLINGS - GRADE 4
DIN EN 14409-3:2004-12	PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND WATER SUPPLY NETWORKS - PART 3: LINING WITH CLOSE-FIT PIPES
I.S. EN 12201-1:2011	PLASTICS PIPING SYSTEMS FOR WATER SUPPLY, AND FOR DRAINAGE AND SEWERAGE UNDER PRESSURE - POLYETHYLENE (PE) - PART 1: GENERAL
I.S. EN 1555-1:2010-2015	PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - POLYETHYLENE (PE) - PART 1: GENERAL
DIN EN 818-3:2008-12	SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 3: MEDIUM TOLERANCE CHAIN FOR CHAIN SLINGS - GRADE 4
I.S. EN 818-5:1999	SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 5: CHAIN SLINGS - GRADE 4
I.S. EN 60601-1-3:2008	MEDICAL ELECTRICAL EQUIPMENT - PART 1-3: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: RADIATION PROTECTION IN DIAGNOSTIC X-RAY EQUIPMENT
EN 60601-1-3 : 2008 AMD 11 2016	MEDICAL ELECTRICAL EQUIPMENT - PART 1-3: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: RADIATION PROTECTION IN DIAGNOSTIC X-RAY EQUIPMENT (IEC 60601-1-3:2008/A1:2013)
I.S. EN 818-4:1997	SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 4: CHAIN SLINGS - GRADE 8
I.S. EN 12007-2:2012	GAS INFRASTRUCTURE - PIPELINES FOR MAXIMUM OPERATING PRESSURE UP TO AND INCLUDING 16 BAR - PART 2: SPECIFIC FUNCTIONAL REQUIREMENTS FOR POLYETHYLENE (MOP UP TO AND INCLUDING 10 BAR)
I.S. EN 818-2:1997	SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 2: MEDIUM TOLERANCE CHAIN FOR CHAIN SLINGS - GRADE 8
VDE 0560-800 : 1998	GENERIC SPECIFICATION - FIXED ALUMINIUM ELECTROLYTIC A.C. CAPACITORS WITH NON-SOLID ELECTROLYTE FOR USE WITH MOTORS
BS 6339(2005) : 2005	GENERAL-PURPOSE INDUSTRIAL FANS - CIRCULAR FLANGES - DIMENSIONS
DIN EN 137000 : 1998-03	GENERIC SPECIFICATION - FIXED ALUMINIUM ELECTROLYTIC A.C. CAPACITORS WITH NON-SOLID ELECTROLYTE FOR USE WITH MOTORS
VDE 0750-2-7 : 2000	MEDICAL ELECTRICAL EQUIPMENT - PART 2-7: PARTICULAR REQUIREMENTS FOR THE SAFETY OF HIGH-VOLTAGE GENERATORS OF DIAGNOSTIC X-RAY GENERATORS
I.S. EN ISO 12162:2009	THERMOPLASTICS MATERIALS FOR PIPES AND FITTINGS FOR PRESSURE APPLICATIONS - CLASSIFICATION, DESIGNATION AND DESIGN COEFFICIENT (ISO 12162:2009)
DIN SPEC 19674-1:2011-02	Plastics piping systems made from glass fibre reinforced polyethylene (PE-GF) for water supply and for drainage and sewerage under pressure - Part 1: General
04/30112659 DC : 0	IEC 62398 ED.1 - TECHNOLOGY APPROVAL SCHEDULE FOR FERRITE CORES
I.S. EN 1452-1:1999	PLASTICS PIPING SYSTEMS FOR WATER SUPPLY - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: GENERAL
97/231700 DC : DRAFT DEC 1997	IEC 60115-1 - FIXED RESISTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION
BS EN 140000:1995	Harmonized system of quality assessment for electronic components. Generic specification: fixed resistors
12/30258383 DC : 0	BS EN ISO 11297-3 - PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND DRAINAGE AND SEWERAGE NETWORKS UNDER PRESSURE - PART 3: LINING WITH CLOSE-FIT PIPES
ISO 16877:2015	Round steel short link chains for lifting purposes Fine tolerance hoist chains for hand operated chain hoists Grade TH
08/30185535 DC : DRAFT JULY 2008	BS EN ISO 1452-1 - PLASTICS PIPING SYSTEMS FOR WATER SUPPLY AND FOR BURIED AND ABOVE-GROUND DRAINAGE AND SEWERAGE UNDER PRESSURE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC U) - PART 1: GENERAL
BS 2782-11.1121A(1996) : 1996	METHODS OF TESTING PLASTICS - THERMOPLASTICS PIPES, FITTINGS AND VALVES, THERMOPLASTICS MATERIALS FOR PIPES AND FITTINGS FOR PRESSURE APPLICATIONS - CLASSIFICATION AND DESIGN OVERALL SERVICE (DESIGN) COEFFICIENT
BS EN ISO 21003-1:2008	Multilayer piping systems for hot and cold water installations inside buildings General
16/30340367 DC : 0	BS 8588 - POLYEPTRHEYSLSEUNREE PIPES WITH AN ALUMINIUM BARRIER LAYER AND ASSOCIATED FITTINGS FOR POTABLE WATER SUPPLY IN CONTAMINATED LAND - SIZE 20 MM TO 630 MM
12/30256736 DC : 0	BS ISO 4437-1 - PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - POLYETHYLENE (PE) - PART 1: GENERAL
BS EN 133000:1997	Harmonized system of quality assessment for electronic components. Generic specification: passive filter units for electromagnetic interference suppression
BS ISO 17885:2015	Plastics piping systems. Mechanical fittings for pressure piping systems. Specifications
BS EN 120000:1996	Harmonized system of quality assessment for electronic components. General specification: semiconductor optoelectronic and liquid crystal devices
04/30107711 DC : DRAFT JAN 2004	ISO/DIS 14531-3 - PLASTIC PIPES AND FITTINGS - CROSSLINKED POLYETHYLENE (PE-X) PIPE SYSTEMS FOR THE CONVEYANCE OF GASEOUS FUELS - METRIC SERIES - SPECIFICATIONS - PART 3: FITTINGS FOR MECHANICAL JOINTING (INCLUDING PE-X/METAL TRANSITIONS)
08/30191143 DC : 0	BS EN 1555-1 - PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - POLYETHYLENE (PE) - PART 1: GENERAL
06/30146370 DC : DRAFT SEP 2006	ISO 15439-1 - PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS FOR MAXIMUM OPERATING PRESSURE UP TO AND INCLUDING 4 BAR - POLYAMIDE (PA) - PART 1: GENERAL
07/30136476 DC : DRAFT APR 2007	IEC 60601-2-44 - MEDICAL ELECTRICAL EQUIPMENT - PART 2-44: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF X-RAY EQUIPMENT FOR COMPUTED TOMOGRAPHY
BS ISO 4393:2015	Fluid power systems and components. Cylinders. Basic series of piston strokes
BS ISO 4437:2007	Buried polyethylene (PE) pipes for the supply of gaseous fuels. Metric series. Specifications
BS EN 125000:1998	Harmonized system of quality assessment for electronic components. Generic specification: cores made of ferrite materials
BS ISO 14531-1:2002	Plastics pipes and fittings. Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels. Metric series. Specifications Pipes
BS ISO 4437-1:2014	Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE) General
ISO 5171:2009	Gas welding equipment Pressure gauges used in welding, cutting and allied processes
DIN EN ISO 1452-1:2010-04	Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: General (ISO 1452-1:2009)
UNE-EN 60601-2-44:2010	Medical electrical equipment -- Part 2-44: Particular requirements for the basic safety and essential performance of X-ray equipment for computed tomography
DIN ISO 16486-1 E : 2015	PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - UNPLASTICIZED POLYAMIDE (PA-U) PIPING SYSTEMS WITH FUSION JOINTING AND MECHANICAL JOINTING - PART 1: GENERAL (ISO 16486-1:2012 + AMD 1:2014)
ISO 15494:2015	Plastics piping systems for industrial applications — Polybutene (PB), polyethylene (PE), polyethylene of raised temperature resistance (PE-RT), crosslinked polyethylene (PE-X), polypropylene (PP) — Metric series for specifications for components and the system
I.S. EN 138000:1998	FIXED INDUCTORS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION (INDUCTORS FOR WHICH SAFETY TESTS ARE REQUIRED) (GENERIC SPECIFICATION)
I.S. EN 133000:1998	PASSIVE FILTER UNITS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION (GENERIC SPECIFICATION)
ONORM EN ISO 5171 : 2010	GAS WELDING EQUIPMENT - PRESSURE GAUGES USED IN WELDING, CUTTING AND ALLIED PROCESSES
HD 395.2.7 : 200S1	MEDICAL ELECTRICAL EQUIPMENT - PARTICULAR REQUIREMENTS FOR THE SAFETY OF HIGH-VOLTAGE GENERATORS OF DIAGNOSTIC X-RAY GENERATORS
ISO 6993-3:2006	Buried, high-impact poly(vinyl chloride) (PVC-HI) piping systems for the supply of gaseous fuels Part 3: Fittings and saddles for a maximum operating pressure of 1 bar (100 kPa)
ISO 16486-1:2012	Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing Part 1: General
DIN EN 1555-1:2010-12	Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 1: General
DIN EN 818-2:2008-12	SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 2: MEDIUM TOLERANCE CHAIN FOR CHAIN SLINGS - GRADE 8
DIN EN 818-5:2008-12	SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 5: CHAIN SLINGS - GRADE 4
DIN EN ISO 12162:2010-04	Thermoplastics materials for pipes and fittings for pressure applications - Classification, designation and design coefficient (ISO 12162:2009)
BS EN 14409-3:2004	Plastics piping systems for renovation of underground water supply networks Lining with close fit pipes
BS EN 12201-1:2011	Plastics piping systems for water supply, and for drainage and sewerage under pressure. Polyethylene (PE) General
ISO 21003-1:2008	Multilayer piping systems for hot and cold water installations inside buildings — Part 1: General
BS EN 12007-2:2012	Gas infrastructure. Pipelines for maximum operating pressure up to and including 16 bar Specific functional requirements for polyethylene (MOP up to and including 10 bar)
UNE-EN 12007-2:2013	Gas infrastructure - Pipelines for maximum operating pressure up to and including 16 bar - Part 2: Specific functional requirements for polyethylene (MOP up to and including 10 bar)
UNI EN 818-4 : 2008	SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 4: CHAIN SLINGS - GRADE 8
UNI EN 12007-2 : 2012	GAS INFRASTRUCTURE - PIPELINES FOR MAXIMUM OPERATING PRESSURE UP TO AND INCLUDING 16 BAR - PART 2: SPECIFIC FUNCTIONAL REQUIREMENTS FOR POLYETHYLENE (MOP UP TO AND INCLUDING 10 BAR)
UNI EN 12201-1 : 2012	PLASTICS PIPING SYSTEMS FOR WATER SUPPLY, AND FOR DRAINAGE AND SEWERAGE UNDER PRESSURE - POLYETHYLENE (PE) - PART 1: GENERAL
UNI EN ISO 12162 : 2010	THERMOPLASTICS MATERIALS FOR PIPES AND FITTINGS FOR PRESSURE APPLICATIONS - CLASSIFICATION, DESIGNATION AND DESIGN COEFFICIENT
UNI EN 818-3 : 2008	SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 3: MEDIUM TOLERANCE CHAIN FOR CHAIN SLINGS - GRADE 4
UNI EN 818-5 : 2008	SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 5: CHAIN SLINGS - GRADE 4
UNI EN 818-2 : 2008	SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 2: MEDIUM TOLERANCE CHAIN FOR CHAIN SLINGS - GRADE 8
DIN EN ISO 11297-3 E : 2013	PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND DRAINAGE AND SEWERAGE NETWORKS UNDER PRESSURE - PART 3: LINING WITH CLOSE-FIT PIPES (ISO 11297-3:2013)
DIN EN ISO 21003-1:2008-11	MULTILAYER PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS INSIDE BUILDINGS - PART 1: GENERAL
BS ISO 161-1:2018	Thermoplastics pipes for the conveyance of fluids. Nominal outside diameters and nominal pressures Metric series
ISO 6328:2000	Photography Photographic materials Determination of ISO resolving power
ISO 14531-2:2004	Plastics pipes and fittings — Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels — Metric series — Specifications — Part 2: Fittings for heat-fusion jointing
BS ISO 14531-2:2004	Plastics pipes and fittings. Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels. Metric series. Specifications Fittings for heat-fusion jointing
BS ISO 8085-1:2001	Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels. Metric series. Specifications Fittings for socket fusion using heated tools
BS 848-4(1997) : 1997	FANS FOR GENERAL PURPOSES - PART 4: DIMENSIONS
11/30248330 DC : 0	BS ISO 17467-1 - PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - UNPLASTICIZED POLYAMIDE (PA-U) PIPING SYSTEMS JOINTED BY SOLVENT CEMENT - PART 1: GENERAL
I.S. EN ISO 1452-1:2009	PLASTICS PIPING SYSTEMS FOR WATER SUPPLY AND FOR BURIED AND ABOVE-GROUND DRAINAGE AND SEWERAGE UNDER PRESSURE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: GENERAL
16/30354166 DC : 0	BS ISO 161-1 - THERMOPLASTICS PIPES FOR THE CONVEYANCE OF FLUIDS - NOMINAL OUTSIDE DIAMETERS AND NOMINAL PRESSURES - PART 1: METRIC SERIES
I.S. EN 562:2003	GAS WELDING EQUIPMENT - PRESSURE GAUGES USED IN WELDING, CUTTING AND ALLIED PROCESSES
BS ISO 17467-1:2012	Plastics piping systems for the supply of gaseous fuels. Unplasticized polyamide (PA-U) piping systems jointed by solvent cement General
PREN ISO 15494 : DRAFT 2013	PLASTICS PIPING SYSTEMS FOR INDUSTRIAL APPLICATIONS - POLYBUTENE (PB), POLYETHYLENE (PE) AND POLYPROPYLENE (PP) - SPECIFICATIONS FOR COMPONENTS AND THE SYSTEM - METRIC SERIES (ISO/DIS 15494:2013)
BS EN ISO 1452-1:2009	Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure. Unplasticized poly(vinyl chloride) (PVC U) General
BS ISO 19899:2010	Plastics piping systems. Polyolefin pipes and mechanical fitting assemblies. Test method for the resistance to end load (AREL test)
10/30208795 DC : 0	BS EN 12007-2 - GAS INFRASTRUCTURE - PIPELINES FOR MAXIMUM OPERATING PRESSURE UP TO AND INCLUDING 16 BAR - PART 2: SPECIFIC FUNCTIONAL RECOMMENDATIONS FOR POLYETHYLENE (MOP UP TO AND INCLUDING 10 BAR)
PREN 12007-2 : DRAFT 2010	GAS INFRASTRUCTURE - PIPELINES FOR MAXIMUM OPERATING PRESSURE UP TO AND INCLUDING 16 BAR - PART 2: SPECIFIC FUNCTIONAL RECOMMENDATIONS FOR POLYETHYLENE (MOP UP TO AND INCLUDING 10 BAR)
BS ISO 6328:2000	Photography. Photographic materials. Determination of ISO resolving power
12/30264202 DC : 0	BS EN ISO 11299-3 - PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND GAS SUPPLY NETWORKS - PART 3: LINING WITH CLOSE-FIT PIPES
UNI EN ISO 1452-1 : 2010	PLASTICS PIPING SYSTEMS FOR WATER SUPPLY AND FOR BURIED AND ABOVE-GROUND DRAINAGE AND SEWERAGE UNDER PRESSURE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: GENERAL
IEC 61045-1:1991	Fixed film resistor networks for use in electronic equipment - Part 1: Generic specification
13/30268502 DC : 0	BS ISO 16877 - ROUND STEEL SHORT LINK CHAINS FOR LIFTING PURPOSES - FINE TOLERANCE HOIST CHAINS FOR HAND OPERATED CHAIN HOISTS - GRADE TH
BS EN 61007:1997	Transformers and inductors for use in electronic and telecommunication equipment. Measuring methods and test procedures
07/30166162 DC : 0	BS IEC 60601-2-44 - MEDICAL ELECTRICAL EQUIPMENT - PART 2-44: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF X-RAY EQUIPMENT FOR COMPUTED TOMOGRAPHY
BS EN ISO 11297-3:2013	Plastics piping systems for renovation of underground drainage and sewerage networks under pressure Lining with close-fit pipes
BS 2782-11:Method 1121B:1997	Methods of testing plastics. Thermoplastics pipes, fittings and valves Thermoplastics pipes for the conveyance of fluids. Nominal outside diameters and nominal pressures. Metric series
BS EN 130000:1994	Harmonized system of quality assessment for electronic components. Generic specification: fixed capacitors
BS ISO 16872:2015	Round steel short link chains for lifting purposes. Fine tolerance hoist chains for hand operated chain hoists. Grade VH
BS CECC 299001:1999	Technology approval schedule. Manufacture of electrical connectors
I.S. EN ISO 15494:2015	PLASTICS PIPING SYSTEMS FOR INDUSTRIAL APPLICATIONS - POLYBUTENE (PB), POLYETHYLENE (PE), POLYETHYLENE OF RAISED TEMPERATURE RESISTANCE (PE-RT), CROSSLINKED POLYETHYLENE (PE-X), POLYPROPYLENE (PP) - METRIC SERIES FOR SPECIFICATIONS FOR COMPONENTS AND THE SYSTEM (ISO 15494:2015)
BS ISO 8085-2:2001	Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels. Metric series. Specifications Spigot fittings for butt fusion, for socket fusion using heated tools and for use with eletrofusion fittings
I.S. EN ISO 5171:2010	GAS WELDING EQUIPMENT - PRESSURE GAUGES USED IN WELDING, CUTTING AND ALLIED PROCESSES
ISO 6993-2:2006	Buried, high-impact poly(vinyl chloride) (PVC-HI) piping systems for the supply of gaseous fuels Part 2: Fittings for a maximum operating pressure of 200 mbar (20 kPa)
I.S. EN 134000:1994	GENERIC SPECIFICATION: VARIABLE CAPACITORS (QUALIFICATION APPROVAL AND CAPABILITY APPROVAL)
NF EN 60601 1-3 : 2008 AMD 1 2013	MEDICAL ELECTRICAL EQUIPMENT - PART 1-3: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: RADIATION PROTECTION IN DIAGNOSTIC X-RAY EQUIPMENT
I.S. CECC 33000:1994	PASSIVE FILTER UNITS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION (GENERIC SPECIFICATION)
ANSI/ASA S1.6 : 2016	PREFERRED FREQUENCIES AND FILTER BAND CENTER FREQUENCIES FOR ACOUSTICAL MEASUREMENTS
UNI EN ISO 11297-3 : 2013	PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND DRAINAGE AND SEWERAGE NETWORKS UNDER PRESSURE - PART 3: LINING WITH CLOSE-FIT PIPES
DIN EN ISO 15494:2016-03	PLASTICS PIPING SYSTEMS FOR INDUSTRIAL APPLICATIONS - POLYBUTENE (PB), POLYETHYLENE (PE), POLYETHYLENE OF RAISED TEMPERATURE RESISTANCE (PE-RT), CROSSLINKED POLYETHYLENE (PE-X), POLYPROPYLENE (PP) - METRIC SERIES FOR SPECIFICATIONS FOR COMPONENTS AND THE SYSTEM (ISO 15494:2015)
BS EN ISO 5171:2010	Gas welding equipment. Pressure gauges used in welding, cutting and allied processes
CEN/TS 15223:2017	Plastics piping systems - Validated design parameters of buried thermoplastics piping systems
ISO 14531-1:2002	Plastics pipes and fittings — Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels — Metric series — Specifications — Part 1: Pipes
ISO 4427-1:2007	Plastics piping systems Polyethylene (PE) pipes and fittings for water supply Part 1: General
ISO 8779:2010	Plastics piping systems Polyethylene (PE) pipes for irrigation Specifications
ISO 8085-3:2001	Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels Metric series Specifications Part 3: Electrofusion fittings
EN ISO 11299-3:2013	Plastics piping systems for renovation of underground gas supply networks - Part 3: Lining with close-fit pipes (ISO 11299-3:2011)
I.S. HD 395-2-7:1990	MEDICAL ELECTRICAL EQUIPMENT - PART 2: PARTICULAR REQUIREMENTS FOR THE SAFETY OF HIGH VOLTAGE GENERATORS OF DIAGNOSTIC X-RAY GENERATORS
IEC 61007:1994	Transformers and inductors for use in electronic and telecommunication equipment - Measuring methods and test procedures
EN 60601-2-44:2009/A2:2016	MEDICAL ELECTRICAL EQUIPMENT - PART 2-44: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF X-RAY EQUIPMENT FOR COMPUTED TOMOGRAPHY (IEC 60601-2-44:2009/A2:2016)
BS EN 818-4 : 1997	SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 4: CHAIN SLINGS - GRADE 8
UNE-EN ISO 5171:2011	Gas welding equipment - Pressure gauges used in welding, cutting and allied processes (ISO 5171:2009)
IEC 60601-1-3:2008+AMD1:2013 CSV	Medical electrical equipment - Part 1-3: General requirements forbasic safety and essential performance - Collateral Standard: Radiation protection in diagnostic X-ray equipment
UNE-EN 1555-1:2011	Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 1: General
IEC 62358:2012	Ferrite cores - Standard inductance factor for gapped cores and its tolerance
ISO 13351:2009	Fans — Dimensions
ISO 15493:2003	Plastics piping systems for industrial applications Acrylonitrile-butadiene-styrene (ABS), unplasticized poly(vinyl chloride) (PVC-U) and chlorinated poly(vinyl chloride) (PVC-C) Specifications for components and the system Metric series
BS EN 818-2 : 1997	SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 2: MEDIUM TOLERANCE CHAIN FOR CHAIN SLINGS - GRADE 8
BS EN 60601-1-3 : 2008	MEDICAL ELECTRICAL EQUIPMENT - PART 1-3: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: RADIATION PROTECTION IN DIAGNOSTIC X-RAY EQUIPMENT (IEC 60601-1-3:2008)
IEC 60601-2-7:1998	Medical electrical equipment - Part 2-7: Particular requirements for the safety of high-voltage generators of diagnostic X-ray generators
BS EN 14408-3:2004	Plastics piping systems for renovation of underground gas supply networks Lining with close-fit pipes
ISO 10931:2005	Plastics piping systems for industrial applications Poly(vinylidene fluoride) (PVDF) Specifications for components and the system
BS EN 818-5 : 1999	SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 5: CHAIN SLINGS - GRADE 4
EN 14409-3:2004	Plastics piping systems for renovation of underground water supply networks - Part 3: Lining with close fit-pipes
EN ISO 12162:2009	Thermoplastics materials for pipes and fittings for pressure applications - Classification, designation and design coefficient (ISO 12162:2009)
EN 1452-1 : 1999	PLASTICS PIPING SYSTEMS FOR WATER SUPPLY - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: GENERAL
EN ISO 1452-1:2009	Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: General (ISO 1452-1:2009)
EN ISO 13351:2009	Fans - Dimensions (ISO 13351:2009)
EN ISO 21003-1:2008	Multilayer piping systems for hot and cold water installations inside buildings - Part 1: General (ISO 21003-1:2008)
EN ISO 10931:2005/A1:2015	Plastics piping systems for industrial applications - Poly(vinylidene fluoride) (PVDF) - Specifications for components and the system (ISO 10931:2005/FDAM 1:2015)
EN 14408-3:2004	Plastics piping systems for renovation of underground gas supply networks - Part 3: Lining with close-fit pipes
EN 818-3:1999+A1:2008	Short link chain for lifting purposes - Safety - Part 3: Medium tolerance chain for chain slings - Grade 4
EN ISO 5171:2010	Gas welding equipment - Pressure gauges used in welding, cutting and allied processes (ISO 5171:2009)
EN 818-2:1996+A1:2008	Short link chain for lifting purposes - Safety - Part 2: Medium tolerance chain for chain slings - Grade 8
EN ISO 15493:2003/A1:2017	Plastics piping systems for industrial applications - Acrylonitrile-butadiene-styrene (ABS), unplasticized poly(vinyl chloride) (PVC-U) and chlorinated poly(vinyl chloride) (PVC-C) - Specifications for components and the system - Metric series - Amendment 1 (ISO 15493:2003/Amd 1:2016 + Cor 1:2004)
EN 818-4:1996+A1:2008	Short link chain for lifting purposes - Safety - Part 4: Chain slings - Grade 8
EN 562 : 2003	GAS WELDING EQUIPMENT - PRESSURE GAUGES USED IN WELDING, CUTTING AND ALLIED PROCESSES
EN 818-5:1999+A1:2008	Short link chain for lifting purposes - Safety - Part 5: Chain slings - Grade 4
17/30363924 DC : 0	BS EN 17176-1 - PLASTICS PIPING SYSTEMS FOR WATER SUPPLY AND FOR BURIED AND ABOVE GROUND DRAINAGE, SEWERAGE AND IRRIGATION UNDER PRESSURE - ORIENTED UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-O) - PART 1: GENERAL
ISO 11299-3:2011	Plastics piping systems for renovation of underground gas supply networks Part 3: Lining with close-fit pipes
10/30206101 DC : 0	BS ISO 11299-3 - PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND GAS SUPPLY NETWORKS - PART 3: LIMNING WITH CLOSE-FIT PIPES
10/30212144 DC : 0	BS EN 12201-1 - PLASTICS PIPING SYSTEMS FOR WATER SUPPLY, AND FOR DRAINAGE AND SEWERAGE UNDER PRESSURE - POLYETHYLENE (PE) - PART 1: GENERAL
17/30361344 DC : 0	BS EN ISO 11298-3 - PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND WATER SUPPLY NETWORKS - PART 3: LINING WITH CLOSE-FIT PIPES
PREN 17176-1 : DRAFT 2017	PLASTICS PIPING SYSTEMS FOR WATER SUPPLY AND FOR BURIED AND ABOVE GROUND DRAINAGE, SEWERAGE AND IRRIGATION UNDER PRESSURE - ORIENTED UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-O) - PART 1: GENERAL
ISO 21004:2006	Plastics piping systems Multilayer pipes and their joints, based on thermoplastics, for water supply
05/30130524 DC : DRAFT MAR 2005	ISO 22621-1 - PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS FOR MAXIMUM OPERATING UP TO AND INCLUDING 2 MPA (20 BAR) - POLYAMIDE (PA) - PART 1: GENERAL
BS ISO 4427-1 : 2007	PLASTICS PIPING SYSTEMS - POLYETHYLENE (PE) PIPES AND FITTINGS FOR WATER SUPPLY - PART 1: GENERAL
ISO 18225:2012	Plastics piping systems — Multilayer piping systems for outdoor gas installations — Specifications for systems
CEI EN 138000 : 1996	GENERIC SPECIFICATION: FIXED INDUCTORS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION (INDUCTORS FOR WHICH SAFETY TESTS ARE REQUIRED)
05/30127475 DC : DRAFT JAN 2005
14/30291027 DC : 0	BS ISO 4393 - FLUID POWER SYSTEMS AND COMPONENTS - CYLINDERS - BASIC SERIES OF PISTON STROKES
CSA C22.2 No. 60601.2.7 : 0	MEDICAL ELECTRICAL EQUIPMENT - PART 2-7: PARTICULAR REQUIREMENTS FOR THE SAFETY OF HIGH-VOLTAGE GENERATORS OF DIAGNOSTIC X-RAY GENERATORS
BS 7579:1992	Specification for designation and nominal sizes of openings for woven wire cloth, perforated plate and electroformed sheet for industrial screens
08/30179691 DC : DRAFT MAR 2008	BS ISO 16630 - METALLIC MATERIALS - METHOD OF HOLE EXPANDING TEST
BS ISO 18225:2012	Plastics piping systems. Multilayer piping systems for outdoor gas installations. Specifications for systems
I.S. EN ISO 13351:2009	FANS - DIMENSIONS
BS ISO 17484-1:2014	Plastics piping systems. Multilayer pipe systems for indoor gas installations with a maximum operating pressure up to and including 5 bar (500 kPa) Specifications for systems
UNI EN ISO 11298-3 : 2011	PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND WATER SUPPLY NETWORKS - PART 3: LINING WITH CLOSE-FIT PIPES
11/30237753 DC : 0	BS ISO 17484-1 - PLASTICS PIPING SYSTEMS - MULTILAYER PIPE SYSTEMS FOR INDOOR GAS INSTALLATIONS WITH A MAXIMUM OPERATING PRESSURE UP TO AND INCLUDING 5 BAR (500 KPA) - PART 1: SPECIFICATIONS FOR SYSTEMS
I.S. 329:2015	GAS DISTRIBUTION MAINS (EDITION 3)
ANSI B93.56M : 82(R1996)	FLUID POWER SYSTEMS AND PRODUCTS - CYLINDERS - BASIC SERIES OF PISTON STROKES,
I.S. EN ISO 11298-3:2011	PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND WATER SUPPLY NETWORKS - PART 3: LINING WITH CLOSE-FIT PIPES
I.S. EN 60601-2-44:2009	MEDICAL ELECTRICAL EQUIPMENT - PART 2-44: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF X-RAY EQUIPMENT FOR COMPUTED TOMOGRAPHY
EN ISO 15494:2015	Plastics piping systems for industrial applications - Polybutene (PB), polyethylene (PE), polyethylene of raised temperature resistance (PE-RT), crosslinked polyethylene (PE-X), polypropylene (PP) - Metric series for specifications for components and the system (ISO 15494:2015)
BS ISO 8779 : 2010	PLASTICS PIPING SYSTEMS - POLYETHYLENE (PE) PIPES FOR IRRIGATION - SPECIFICATIONS
UNI 10667-13 : 2013	PLASTIC RAW-SECONDARY MATERIALS FILLERS OBTAINED FROM GRINDING OF PRODUCTION AND/OR POST-CONSUMER WASTE OF REINFORCED PLASTICS COMPOSITES - PART 13: REQUIREMENTS AND TEST METHODS
UNI EN ISO 13351 : 2010	FANS - DIMENSIONS
I.S. EN ISO 21003-1:2008	MULTILAYER PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS INSIDE BUILDINGS - PART 1: GENERAL
ISO 6993-1:2006	Buried, high-impact poly(vinyl chloride) (PVC-HI) piping systems for the supply of gaseous fuels Part 1: Pipes for a maximum operating pressure of 1 bar (100 kPa)
ISO 12162:2009	Thermoplastics materials for pipes and fittings for pressure applications Classification, designation and design coefficient
UNI EN ISO 5171 : 2010	GAS WELDING EQUIPMENT - PRESSURE GAUGES USED IN WELDING, CUTTING AND ALLIED PROCESSES
ISO 1452-1:2009	Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure Unplasticized poly(vinyl chloride) (PVC-U) Part 1: General
DIN EN ISO 5171:2010-07	GAS WELDING EQUIPMENT - PRESSURE GAUGES USED IN WELDING, CUTTING AND ALLIED PROCESSES
ISO 8085-2:2001	Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels Metric series Specifications Part 2: Spigot fittings for butt fusion, for socket fusion using heated tools and for use with electrofusion fittings
EN ISO 11298-3:2011	Plastics piping systems for renovation of underground water supply networks - Part 3: Lining with close-fit pipes (ISO 11298-3:2010)
ISO/TS 16630:2003	Metallic materials Method of hole expanding test
I.S. EN 62358:2012	FERRITE CORES - STANDARD INDUCTANCE FACTOR FOR GAPPED CORES AND ITS TOLERANCE (IEC 62358:2012 (EQV))
ISO 15439-1:2007	Plastics piping systems for the supply of gaseous fuels for maximum operating pressure up to and including 0,4 MPa (4 bar) Polyamide (PA) Part 1: General
DIN EN 14408-3:2004-12	PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND GAS SUPPLY NETWORKS - PART 3: LINING WITH CLOSE-FIT PIPES
DIN EN ISO 10931:2015-11	PLASTICS PIPING SYSTEMS FOR INDUSTRIAL APPLICATIONS - POLY(VINYLIDENE FLUORIDE) (PVDF) - SPECIFICATIONS FOR COMPONENTS AND THE SYSTEM (ISO 10931:2005 + AMD 1:2015)
BS EN 1452-1 : 2000	PLASTICS PIPING SYSTEMS FOR WATER SUPPLY - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: GENERAL
BS EN ISO 10931 : 2005	PLASTICS PIPING SYSTEMS FOR INDUSTRIAL APPLICATIONS - POLY(VINYLIDENE FLUORIDE) (PVDF) - SPECIFICATIONS FOR COMPONENTS AND THE SYSTEM
UNE-EN 12201-1:2012	Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 1: General
BS EN ISO 15493 : 2003	PLASTICS PIPING SYSTEMS FOR INDUSTRIAL APPLICATIONS - ACRYLONITRILE-BUTADIENE-STYRENE (ABS), UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) AND CHLORINATED POLY(VINYL CHLORIDE) (PVC-C) - SPECIFICATIONS FOR COMPONENTS AND THE SYSTEM - METRIC SERIES (ISO 15493:2003)
BS EN 562:2003	Gas welding equipment. Pressure gauges used in welding, cutting and allied processes
OVE/ONORM EN 60601-1-3 : 2014	MEDICAL ELECTRICAL EQUIPMENT - PART 1-3: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: RADIATION PROTECTION IN DIAGNOSTIC X-RAY EQUIPMENT (IEC 60601-1-3:2008 + A1:2013)
DIN EN ISO 11298-3:2011-07	PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND WATER SUPPLY NETWORKS - PART 3: LINING WITH CLOSE-FIT PIPES
EN 137000:1995	Generic Specification: Fixed aluminium electrolytic a.c. capacitors with non-solid electrolyte for use with motors
DIN EN ISO 11299-3:2013-05	PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND GAS SUPPLY NETWORKS - PART 3: LINING WITH CLOSE-FIT PIPES (ISO 11299-3:2011)
EN 62358:2012	FERRITE CORES - STANDARD INDUCTANCE FACTOR FOR GAPPED CORES AND ITS TOLERANCE (IEC 62358:2012)
DIN EN 818-4:2008-12	SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 4: CHAIN SLINGS - GRADE 8
EN 140000 : 1993	GENERIC SPECIFICATION: FIXED RESISTORS
UNE-EN 60601-1-3:2008	Medical electrical equipment- Part 1-3: General requirements for basic safety and essential performance- Collateral Standard: Radiation protection in diagnostic X-ray equipment
ASME B32.100 : 2016	PREFERRED METRIC SIZES FOR FLAT, ROUND, SQUARE, RECTANGULAR AND HEXAGONAL METAL PRODUCTS
BS CECC 30000:1992	Harmonized system of quality assessment for electronic components. Generic specification: fixed capacitors
BS CECC 30000:1984	Harmonized system of quality assessment for electronic components: generic specification: fixed capacitors
CEI EN 60115-1:2023	Fixed resistors for use in electronic equipment Part 1: Generic specification