Customer Support: 131 242

  • There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

ISO 6162-1:2012

Current
Current

The latest, up-to-date edition.

Hydraulic fluid power — Flange connections with split or one-piece flange clamps and metric or inch screws — Part 1: Flange connectors, ports and mounting surfaces for use at pressures of 3,5 MPa (35 bar) to 35 MPa (350 bar), DN 13 to DN 127
Available format(s)

Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users

Language(s)

French, English

Published date

14-12-2012

ISO 6162-1:2012 gives general and dimensional specifications for flanged heads, split flange clamps (FCS and FCSM), one-piece flange clamps (FC and FCM), ports and mounting surfaces applicable to four-screw, split and one-piece flange clamp type tube connectors and hose fittings for use at pressures of 3,5 MPa (35 bar ) to 35 MPa (350 bar). It also specifies the dimensions of the seals to be used, as well as the grooves that house the seals.

ISO 6162-1:2012 also recognizes the need to accommodate metric screw fasteners (type 1), as well as to provide a means to use existing inch screw fasteners (type 2).

These connections are intended for application in hydraulic systems on industrial and commercial products where it is desired to avoid the use of threaded connectors.

Surges of pressure higher than the nominal ratings will reduce the ability of the flange connections to retain the hydraulic fluid. This needs to be taken into account in the design of the hydraulic system.

Committee
ISO/TC 131/SC 4
DevelopmentNote
Together with ISO 6162-2 supersedes ISO 6162. (12/2002) Supersedes ISO/DIS 6162-1. (12/2012)
DocumentType
Standard
Pages
22
PublisherName
International Organization for Standardization
Status
Current
Supersedes

Standards Relationship
BS ISO 6162-1:2012 Identical
NF ISO 6162-1 : 2013 Identical
NEN ISO 6162-1 : 2012 Identical
DIN ISO 6162-1:2006-02 Identical
SN ISO 6162-1 : 2005 CORR 2005 Identical

16/30328245 DC : 0 BS ISO 6164 - HYDRAULIC FLUID POWER - FOUR-SCREW, ONE-PIECE SQUARE FLANGE CONNECTIONS FOR USE AT PRESSURES OF 42 MPA, DN 10 TO 80
DIN ISO 12151-3 E : 2012 CONNECTIONS FOR HYDRAULIC FLUID POWER AND GENERAL USE - HOSE FITTINGS - PART 3: HOSE FITTINGS WITH ISO 6162-1 OR ISO 6162-2 FLANGE ENDS (ISO 12151-3:2010)
04/30098195 DC : DRAFT JUL 2004 ISO 6020-2 - HYDRAULIC FLUID POWER - MOUNTING DIMENSIONS FOR SINGLE ROD CYLINDERS, 16 MPA (160 BAR) SERIES - PART 2: COMPACT SERIES
BS ISO 6022:2006 Hydraulic fluid power. Mounting dimensions for single rod cylinders, 25M Pa (250 bar) series
BS ISO 10946:1999 Hydraulic fluid power. Gas-loaded accumulators with separator. Selection of preferred hydraulic ports
06/30128831 DC : DRAFT MAR 2006 ISO 6020-1 - HYDRAULIC FLUID POWER - MOUNTING DIMENSIONS FOR SINGLE ROD CYLINDERS, 16 MPA (160 BAR) SERIES - PART 1: MEDIUM SERIES
UNE-EN ISO 4413:2011 Hydraulic fluid power - General rules and safety requirements for systems and their components (ISO 4413:2010)
ISO 17165-1:2007 Hydraulic fluid power Hose assemblies Part 1: Dimensions and requirements
UNE-EN ISO 19879:2010 Metallic tube connections for fluid power and general use - Test methods for hydraulic fluid power connections (ISO 19879:2010)
EN ISO 19879:2010 Metallic tube connections for fluid power and general use - Test methods for hydraulic fluid power connections (ISO 19879:2010)
DIN ISO 6022:2008-06 HYDRAULIC FLUID POWER - MOUNTING DIMENSIONS FOR SINGLE ROD CYLINDERS, 25 MPA (250 BAR) SERIES
DIN EN ISO 16330:2004-08 Reciprocating positive displacement pumps and pump units - Technical requirements (ISO 16330:2003)
DIN ISO 6022 E : 2008 HYDRAULIC FLUID POWER - MOUNTING DIMENSIONS FOR SINGLE ROD CYLINDERS, 25 MPA (250 BAR) SERIES
09/30202316 DC : 0 BS EN 12514-4 - PARTS FOR SUPPLY SYSTEMS FOR CONSUMING UNITS WITH LIQUID FUELS - PART 4: SAFETY REQUIREMENTS AND TESTS - PIPINGS AND PARTS WITHIN PIPELINES
BS ISO 6020-1:2007 Hydraulic fluid power. Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series Medium series
BS EN ISO 4413:2010 Hydraulic fluid power. General rules and safety requirements for systems and their components
BS ISO 6020-2:2015 Hydraulic fluid power. Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series Compact series
SAE J 846 : 2015 CODING SYSTEMS FOR IDENTIFICATION OF FLUID CONDUCTORS AND CONNECTORS
07/30163202 DC : 0 BS ISO 12151-3 - CONNECTIONS FOR HYDRAULIC FLUID POWER AND GENERAL USE - HOSE FITTINGS - PART 3: HOSE FITTINGS WITH ISO 6162-1 OR ISO 6162-2 FLANGE ENDS
BS ISO 6020-3:2015 Hydraulic fluid power. Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series Compact series with bores from 250 mm to 500 mm
ISO 4081:2016 Rubber hoses and tubing for cooling systems for internal-combustion engines Specification
DIN EN ISO 4413:2011-04 Hydraulic fluid power - General rules and safety requirements for systems and their components (ISO 4413:2010)
SAE J 515 : 2015 SPECIFICATION FOR O-RING MATERIALS USED WITH HYDRAULIC CONNECTORS
ISO 6164:1994 Hydraulic fluid power Four-screw, one-piece square-flange connections for use at pressures of 25 MPa and 40 MPa (250 bar and 400 bar)
SAE J 518/3 : 2015 HYDRAULIC FLANGE CLAMPS, 2-SCREW FLANGE CONNECTION TO BE USED WITH SAE J518-1, (CODE 61) CONNECTIONS WHERE ONLY LOW PRESSURE IS REQUIRED
DIN EN ISO 19879 E : 2011 METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - TEST METHODS FOR HYDRAULIC FLUID POWER CONNECTIONS
ISO 19859:2016 Gas turbine applications Requirements for power generation
I.S. EN ISO 19879:2010 METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - TEST METHODS FOR HYDRAULIC FLUID POWER CONNECTIONS
SAE J 2551/3 : 2013 RECOMMENDED PRACTICES FOR FLUID CONDUCTOR CARBON, ALLOY AND HIGH STRENGTH LOW ALLOY STEEL TUBING APPLICATIONS - PART 3: PROCUREMENT
UNI ISO 12151-3 : 2012 CONNECTIONS FOR HYDRAULIC FLUID POWER AND GENERAL USE - HOSE FITTINGS - PART 3: HOSE FITTINGS WITH ISO 6162-1 OR ISO 6162-2 FLANGE ENDS
BS ISO 12151-3:2010 Connections for hydraulic fluid power and general use. Hose fittings Hose fittings with ISO 6162-1 or ISO 6162-2 flange ends
BS ISO 16874:2004 Hydraulic fluid power. Identification of manifold assemblies and their components
BS ISO 17165-1:2007 Hydraulic fluid power. Hose assemblies Dimensions and requirements
ISO 6022:2006 Hydraulic fluid power — Mounting dimensions for single rod cylinders, 25 MPa (250 bar) series
09/30193685 DC : 0 BS ISO 4081 - RUBBER HOSES AND TUBING FOR COOLING SYSTEMS FOR INTERNAL-COMBUSTION ENGINES - SPECIFICATION
SAE J 2551/1 : 2013 RECOMMENDED PRACTICES FOR FLUID CONDUCTOR CARBON, ALLOY AND HIGH STRENGTH LOW ALLOY STEEL TUBING APPLICATIONS - PART 1: DESIGN AND FABRICATION
SAE J 1677 : 2016 TESTS AND PROCEDURES FOR CARBON STEEL AND HIGH STRENGTH LOW ALLOY STEEL TUBING
SAE J 518/2 : 2017 HYDRAULIC FLANGED TUBE, PIPE, AND HOSE CONNECTIONS, 4-SCREW FLANGE CONNECTION - PART 2: 42 MPA (CODE 62)
ISO 6020-3:2015 Hydraulic fluid power — Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series — Part 3: Compact series with bores from 250 mm to 500 mm
ISO 6020-2:2015 Hydraulic fluid power Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series Part 2: Compact series
03/110806 DC : DRAFT JUNE 2003 BS ISO 19879 - METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - TEST METHODS FOR HYDRAULIC FLUID POWER CONNECTIONS
14/30274168 DC : 0 BS ISO 6020-3 - HYDRAULIC FLUID POWER - MOUNTING DIMENSIONS FOR SINGLE ROD CYLINDERS, 16 MPA (160 BAR) SERIES - PART 3: COMPACT SERIES WITH BORES FROM 250 MM TO 500 MM
SAE J 2551/2 : 2013 RECOMMENDED PRACTICES FOR FLUID CONDUCTOR CARBON, ALLOY AND HIGH STRENGTH LOW ALLOY STEEL TUBING APPLICATIONS - PART 2: GENERAL SPECIFICATIONS AND PERFORMANCE REQUIREMENTS
PD ISO/TS 11672:2016 Connectors for fluid power and general use. Designation and nomenclature
UNI ISO 17165-1 : 2012 HYDRAULIC FLUID POWER - HOSE ASSEMBLIES - PART 1: DIMENSIONS AND REQUIREMENTS
BS ISO 4081:2016 Rubber hoses and tubing for cooling systems for internal-combustion engines. Specification
DIN ISO 6020-1:2010-07 Hydraulic fluid power - Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series - Part 1: Medium series (ISO 6020-1:2007)
SAE J 518/1 : 2013 HYDRAULIC FLANGED TUBE, PIPE, AND HOSE CONNECTIONS, 4-SCREW FLANGE CONNECTION - PART 1: 3.5 MPA TO 35 MPA (CODE 61)
SAE J 2593 : 2015 INFORMATION REPORT FOR THE INSTALLATION OF FLUID CONDUCTORS AND CONNECTORS
ISO 6020-1:2007 Hydraulic fluid power — Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series — Part 1: Medium series
ISO 16874:2004 Hydraulic fluid power Identification of manifold assemblies and their components
BS EN ISO 16330:2003 Reciprocating positive displacement pumps and pump units. Technical requirements
ISO 4413:2010 Hydraulic fluid power General rules and safety requirements for systems and their components
BS ISO 19859:2016 Gas turbine applications. Requirements for power generation
ISO 16330:2003 Reciprocating positive displacement pumps and pump units Technical requirements
ISO 19879:2010 Metallic tube connections for fluid power and general use Test methods for hydraulic fluid power connections
EN ISO 16330 : 2003 RECIPROCATING POSITIVE DISPLACEMENT PUMPS AND PUMP UNITS - TECHNICAL REQUIREMENTS
EN ISO 4413:2010 Hydraulic fluid power - General rules and safety requirements for systems and their components (ISO 4413:2010)
04/30098199 DC : DRAFT JUL 2004 ISO 6022 - HYDRAULIC FLUID POWER - MOUNTING DIMENSIONS FOR SINGLE ROD CYLINDERS, 25 MPA (250 BAR) SERIES
SAE J 1065 : 2016 NOMINAL REFERENCE WORKING PRESSURES FOR STEEL HYDRAULIC TUBING
SAE J 2614 : 2018 WELDED AND COLD-DRAWN, HIGH STRENGTH (500 MPA TENSILE STRENGTH) HYDRAULIC TUBING, FOR BENDING, FLARING, COLD FORMING, WELDING AND BRAZING
14/30284271 DC : 0 BS ISO 6020-2 - HYDRAULIC FLUID POWER - MOUNTING DIMENSIONS FOR SINGLE ROD CYLINDERS, 16 MPA (160 BAR) SERIES - PART 2: COMPACT SERIES
ISO 12151-3:2010 Connections for hydraulic fluid power and general use Hose fittings Part 3: Hose fittings with ISO 6162-1 or ISO 6162-2 flange ends
SAE J 2551 : 2013 RECOMMENDED PRACTICES FOR FLUID CONDUCTOR CARBON AND ALLOY STEEL TUBING APPLICATIONS
UNI EN ISO 19879 : 2011 METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - TEST METHODS FOR HYDRAULIC FLUID POWER CONNECTIONS
PD ISO/TS 17165-2:2013 Hydraulic fluid power. Hose assemblies Practices for hydraulic hose assemblies
NF EN ISO 4413 : 2011 HYDRAULIC FLUID POWER - GENERAL RULES AND SAFETY REQUIREMENTS FOR SYSTEMS AND THEIR COMPONENTS
NF ISO 12151-3 : 2010 CONNECTIONS FOR HYDRAULIC FLUID POWER AND GENERAL USE - HOSE FITTINGS - PART 3: HOSE FITTINGS WITH ISO 6162-1 OR ISO 6162-2 FLANGE ENDS
DIN EN ISO 19879:2011-01 Metallic tube connections for fluid power and general use - Test methods for hydraulic fluid power connections (ISO 19879:2010)
14/30244780 DC : 0 BS ISO 19859 - GAS TURBINE APPLICATIONS - REQUIREMENTS FOR POWER GENERATION
BS EN ISO 19879:2010 Metallic tube connections for fluid power and general use. Test methods for hydraulic fluid power connections
DIN ISO 12151-3:2012-08 Connections for hydraulic fluid power and general use - Hose fittings - Part 3: Hose fittings with ISO 6162-1 or ISO 6162-2 flange ends (ISO 12151-3:2010)

ISO 68-2:1998 ISO general purpose screw threads — Basic profile — Part 2: Inch screw threads
ISO 5598:2008 Fluid power systems and components Vocabulary
ISO 1101:2017 Geometrical product specifications (GPS) — Geometrical tolerancing — Tolerances of form, orientation, location and run-out
SAE J 429 : 2014 MECHANICAL AND MATERIAL REQUIREMENTS FOR EXTERNALLY THREADED FASTENERS
ISO 724:1993 ISO general-purpose metric screw threads — Basic dimensions
ISO 4017:2014 Fasteners Hexagon head screws Product grades A and B
ISO 6708:1995 Pipework components Definition and selection of DN (nominal size)
ISO 4762:2004 Hexagon socket head cap screws
ISO 5864:1993 ISO inch screw threads Allowances and tolerances
ISO 1302:2002 Geometrical Product Specifications (GPS) Indication of surface texture in technical product documentation
SAE J 515 : 2015 SPECIFICATION FOR O-RING MATERIALS USED WITH HYDRAULIC CONNECTORS
ISO 12151-3:2010 Connections for hydraulic fluid power and general use Hose fittings Part 3: Hose fittings with ISO 6162-1 or ISO 6162-2 flange ends
ISO 7089:2000 Plain washers Normal series Product grade A
ISO 68-1:1998 ISO general purpose screw threads — Basic profile — Part 1: Metric screw threads
ISO 19879:2010 Metallic tube connections for fluid power and general use Test methods for hydraulic fluid power connections
ISO 6164:1994 Hydraulic fluid power Four-screw, one-piece square-flange connections for use at pressures of 25 MPa and 40 MPa (250 bar and 400 bar)
ISO 80000-1:2009 Quantities and units — Part 1: General
ISO 725:2009 ISO inch screw threads Basic dimensions
ASME B18.3 : 2012 SOCKET CAP, SHOULDER, SET SCREWS, AND HEX KEYS (INCH SERIES)
ISO 273:1979 Fasteners — Clearance holes for bolts and screws
ISO 9227:2017 Corrosion tests in artificial atmospheres — Salt spray tests
ISO 261:1998 ISO general purpose metric screw threads General plan
ISO 10763:1994 Hydraulic fluid power Plain-end, seamless and welded precision steel tubes Dimensions and nominal working pressures
ISO 3601-1:2012 Fluid power systems — O-rings — Part 1: Inside diameters, cross-sections, tolerances and designation codes
ASTM A 574 : 2017 : REDLINE Standard Specification for Alloy Steel Socket-Head Cap Screws
ISO 13715:2017 Technical product documentation Edges of undefined shape Indication and dimensioning
ISO 3601-3:2005 Fluid power systems O-rings Part 3: Quality acceptance criteria
ISO 48:2010 Rubber, vulcanized or thermoplastic Determination of hardness (hardness between 10 IRHD and 100 IRHD)
ISO 263:1973 ISO inch screw threads General plan and selection for screws, bolts and nuts Diameter range 0,06 to 6 in
ISO 898-1:2013 Mechanical properties of fasteners made of carbon steel and alloy steel — Part 1: Bolts, screws and studs with specified property classes — Coarse thread and fine pitch thread

View more information
$243.10
Including GST where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Need help?
Call us on 131 242, then click here to start a Screen Sharing session
so we can help right away! Learn more