ISO 6272-1:2011
Current
Current
The latest, up-to-date edition.
Paints and varnishes — Rapid-deformation (impact resistance) tests — Part 1: Falling-weight test, large-area indenter
Available format(s)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
French, English, Russian
Published date
09-08-2011
ISO 6272-1:2011 describes a method for evaluating the resistance of a dry film of paint, varnish or related product to cracking or peeling from a substrate when it is subjected to a deformation caused by a falling weight, with a 20-mm-diameter spherical indenter, dropped under standard conditions.
NOTE The terms "impact" and "impact resistance" are used in the title and text of ISO 6272-1, but an important characteristic of the apparatus used is that it should produce rapid deformation rather than a true impact.
The method described can be applied
- either as a pass/fail test, the test being carried out from one drop height and with a specified mass, so as to test compliance with a particular specification;
- or as a classification test, to determine, by gradually increasing the drop height and/or the mass, the minimum mass and/or drop height for which the coating cracks or peels from its substrate.
| DevelopmentNote |
Together with ISO 6272-2 supersedes ISO 6272. (08/2002) Supersedes ISO/DIS 6272-1. (08/2011)
|
| DocumentType |
Standard
|
| Pages |
7
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| NF EN ISO 6272-1 : 2011 | Identical |
| NBN EN ISO 6272-1 : 2011 | Identical |
| NEN EN ISO 6272-1 : 2011 | Identical |
| UNE-EN ISO 6272-1:2012 | Identical |
| NS EN ISO 6272-1 : 2011 | Identical |
| I.S. EN ISO 6272-1:2011 | Identical |
| PN EN ISO 6272-1 : 2011 | Identical |
| SN EN ISO 6272-1:2011 | Identical |
| UNI EN ISO 6272-1 : 2013 | Identical |
| SS-EN ISO 6272-1:2011 | Identical |
| IS 101 : Part 5 : Sec 3 : 2019 | Identical |
| BS EN ISO 6272-1:2011 | Identical |
| EN ISO 6272-1:2011 | Identical |
| DIN EN ISO 6272-1:2011-11 | Identical |
| NEN ISO 6272-1 : 2002 | Identical |
| DIN EN ISO 6272:1994-10 | Corresponds |
| I.S. EN 3840:2007 | AEROSPACE SERIES - PAINTS AND VARNISHES - TECHNICAL SPECIFICATION |
| PREN 1504-2 : DRAFT 2015 | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 2: SURFACE PROTECTION SYSTEMS FOR CONCRETE |
| 12/30256076 DC | BS EN 12899-1 AMD1. Fixed, vertical road traffic signs. Part 1. Fixed signs |
| 08/30175210 DC : DRAFT APR 2008 | BS EN 15773 - INDUSTRIAL APPLICATION OF POWDER ORGANIC COATINGS TO HOT DIP GALVANIZED AND SHERARDIZED STEEL ARTICLES [DUPLEX SYSTEMS] - SPECIFICATIONS, RECOMMENDATIONS AND GUIDELINES |
| 17/30356734 DC : 0 | BS EN 14236 - ULTRASONIC DOMESTIC GAS METERS |
| I.S. CWA 15596:2006 | CODE OF PRACTICE ON CLEANABILITY OF COMMERCIAL FOOD EQUIPMENT USED IN THE RETAIL AND CATERING SECTORS |
| DIN EN 1504-2:2015-03 (Draft) | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 2: SURFACE PROTECTION SYSTEMS FOR CONCRETE |
| DIN EN 1396:2015-06 | Aluminium and aluminium alloys - Coil coated sheet and strip for general applications - Specifications |
| EN 10245-1:2011 | Steel wire and wire products - Organic coatings on steel wire - Part 1: General rules |
| EN 13523-5:2014 | Coil coated metals - Test methods - Part 5: Resistance to rapid deformation (impact test) |
| ONORM EN 1396 : 2015 | ALUMINIUM AND ALUMINIUM ALLOYS - COIL COATED SHEET AND STRIP FOR GENERAL APPLICATIONS - SPECIFICATIONS |
| 14/30289467 DC : 0 | BS EN ISO 3248 - PAINTS AND VARNISHES - DETERMINATION OF THE EFFECT OF HEAT |
| SAE AMS 3095 : 2004 | PAINT: HIGH GLOSS FOR AIRLINE EXTERIOR SYSTEM |
| 13/30286946 DC : 0 | BS EN 1396 - ALUMINIUM AND ALUMINIUM ALLOYS - COIL COATED SHEET AND STRIP FOR GENERAL APPLICATIONS - SPECIFICATIONS |
| 02/122653 DC : DRAFT JUN 2002 | BS EN ISO 6860 - PAINTS AND VARNISHES - BEND TEST (CONICAL MANDREL) |
| 10/30210875 DC : 0 | BS EN ISO 13076 - PAINTS AND VARNISHES - LIGHTING AND PROCEDURE FOR VISUAL ASSESSMENTS |
| 12/30268958 DC : 0 | BS EN 13523-5 - COIL COATED METALS - TEST METHODS - PART 5: RESISTANCE TO RAPID DEFORMATION (IMPACT TEST) |
| PREN 13813 : DRAFT 2017 | SCREED MATERIAL AND FLOOR SCREEDS - SCREED MATERIAL - PROPERTIES AND REQUIREMENTS |
| UNI EN 4476 : 2012 | AEROSPACE SERIES - PAINTS AND VARNISHES - COLD CURING INTERMEDIATE COAT |
| EN 14236:2007 | Ultrasonic domestic gas meters |
| DIN EN 14236:2008-06 | ULTRASONIC DOMESTIC GAS METERS |
| I.S. EN ISO 6860:2006 | PAINTS AND VARNISHES - BEND TEST (CONICAL MANDREL) |
| I.S. EN 13523-5:2014 | COIL COATED METALS - TEST METHODS - PART 5: RESISTANCE TO RAPID DEFORMATION (IMPACT TEST) |
| I.S. EN 10245-1:2011 | STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 1: GENERAL RULES |
| I.S. EN 1396:2015 | ALUMINIUM AND ALUMINIUM ALLOYS - COIL COATED SHEET AND STRIP FOR GENERAL APPLICATIONS - SPECIFICATIONS |
| I.S. EN ISO 3248:2016 | PAINTS AND VARNISHES - DETERMINATION OF THE EFFECT OF HEAT (ISO 3248:2016) |
| AEP-64 : 2012 | PERFORMANCE REQUIREMENTS FOR PAINT SYSTEMS RESISTANT TO CHEMICAL AGENTS AND DECONTAMINANTS, FOR THE PROTECTION OF LAND MILITARY EQUIPMENT |
| DIN EN ISO 17132:2008-01 | PAINTS AND VARNISHES - T-BEND TEST |
| 08/30180835 DC : DRAFT JUNE 2008 | BS EN 10245-1 - STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 1: GENERAL RULES |
| BS EN 4476:2011 | Aerospace series. Paints and varnishes. Cold curing intermediate coat |
| UNI EN ISO 13076 : 2012 | PAINTS AND VARNISHES - LIGHTING AND PROCEDURE FOR VISUAL ASSESSMENTS OF COATINGS |
| I.S. EN 14236:2007 | ULTRASONIC DOMESTIC GAS METERS |
| PREN 13523-5 : DRAFT 2012 | COIL COATED METALS - TEST METHODS - PART 5: RESISTANCE TO RAPID DEFORMATION (IMPACT TEST) |
| DIN EN 14879-3 E : 2007 | ORGANIC COATING SYSTEMS AND LININGS FOR PROTECTION OF INDUSTRIAL APPARATUS AND PLANTS AGAINST CORROSION CAUSED BY AGGRESSIVE MEDIA - PART 3: COATINGS ON CONCRETE COMPONENTS |
| DIN EN ISO 6860:2006-06 | Paints and varnishes - Bend test (conical mandrel) (ISO 6860:2006) |
| UNE-EN ISO 3248:2017 | Paints and varnishes - Determination of the effect of heat (ISO 3248:2016) |
| ISO 17132:2007 | Paints and varnishes T-bend test |
| BS EN 1504-2:2004 | Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and evaluation of conformity Surface protection systems for concrete |
| BS EN 1396:2007 | Aluminium and aluminium alloys. Coil coated sheet and strip for general applications. Specifications |
| ISO 3248:2016 | Paints and varnishes Determination of the effect of heat |
| DIN EN 1504-2:2005-01 | Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 2: Surface protection systems for concrete; German version EN 1504-2:2004 |
| UNE-EN ISO 13076:2013 | Paints and varnishes - Lighting and procedure for visual assessments of coatings (ISO 13076:2012) |
| EN ISO 17132:2007 | Paints and varnishes - T-bend test (ISO 17132:2007) |
| UNI EN 10245-1 : 2011 | STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 1: GENERAL RULES |
| EN ISO 6860:2006 | Paints and varnishes - Bend test (conical mandrel) (ISO 6860:2006) |
| UNI EN 13523-5 : 2014 | COIL COATED METALS - TEST METHODS - PART 5: RESISTANCE TO RAPID DEFORMATION (IMPACT TEST) |
| DIN EN ISO 13076:2012-10 | PAINTS AND VARNISHES - LIGHTING AND PROCEDURE FOR VISUAL ASSESSMENTS OF COATINGS (ISO 13076:2012) |
| PREN 14236 : DRAFT 2017 | ULTRASONIC DOMESTIC GAS METERS |
| PREN 3840 : 200P2 | AEROSPACE SERIES - PAINTS AND VARNISHES - TECHNICAL SPECIFICATION |
| BS EN ISO 13076:2012 | Paints and varnishes. Lighting and procedure for visual assessments of coatings |
| DIN EN 14236 E : 2008 | ULTRASONIC DOMESTIC GAS METERS |
| 15/30316975 DC : 0 | BS EN 1504-2 - PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 2: SURFACE PROTECTION SYSTEMS FOR CONCRETE |
| I.S. EN ISO 17132:2007 | PAINTS AND VARNISHES - T-BEND TEST |
| DIN EN 13523-5:2014-08 | Coil coated metals - Test methods - Part 5: Resistance to rapid deformation (impact test) |
| BS EN 13523-5:2014 | Coil coated metals. Test methods Resistance to rapid deformation (impact test) |
| UNE-EN 1396:2015 | Aluminium and aluminium alloys - Coil coated sheet and strip for general applications - Specifications |
| ISO 13076:2012 | Paints and varnishes Lighting and procedure for visual assessments of coatings |
| ISO 6860:2006 | Paints and varnishes Bend test (conical mandrel) |
| UNE-EN 1504-2:2005 | Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 2: Surface protection systems for concrete |
| BS EN 14236:2007 | Ultrasonic domestic gas meters |
| BS EN 14879-3:2006 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media Coatings on concrete components |
| BS EN 10245-1:2011 | Steel wire and wire products. Organic coatings on steel wire General rules |
| UNE-EN 10245-1:2012 | Steel wire and wire products - Organic coatings on steel wire - Part 1: General rules |
| BS EN ISO 3248:2001 | Paints and varnishes. Determination of the effect of heat |
| BS EN ISO 6860:2006 | Paints and varnishes. Bend test (conical mandrel) |
| DIN EN 10245-1:2012-01 | STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 1: GENERAL RULES |
| EN 14879-3:2006 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 3: Coatings on concrete components |
| EN ISO 13076:2012 | Paints and varnishes - Lighting and procedure for visual assessments of coatings (ISO 13076:2012) |
| EN ISO 3248:2016 | Paints and varnishes - Determination of the effect of heat (ISO 3248:2016) |
| EN 4476:2011 | Aerospace series - Paints and varnishes - Cold curing intermediate coat |
| EN 1396:2015 | Aluminium and aluminium alloys - Coil coated sheet and strip for general applications - Specifications |
| EN 3840:2007 | Aerospace series - Paints and varnishes - Technical specification |
| EN 1504-2:2004 | Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 2: Surface protection systems for concrete |
| BS EN ISO 17132:2007 | Paints and varnishes. T-bend test |
| 17/30371000 DC : 0 | BS EN 4476 - AEROSPACE SERIES - PAINTS AND VARNISHES - COLD CURING INTERMEDIATE COAT |
| BS EN 3840:2007 | Aerospace series. Paints and varnishes. Technical specification |
| BS 2X 35(2003) : 2003 | SELECTIVELY REMOVABLE INTERMEDIATE COATING FOR AEROSPACE PURPOSES |
| PREN 1396 : DRAFT 2013 | ALUMINIUM AND ALUMINIUM ALLOYS - COIL COATED SHEET AND STRIP FOR GENERAL APPLICATIONS - SPECIFICATIONS |
| I.S. EN ISO 13076:2012 | PAINTS AND VARNISHES - LIGHTING AND PROCEDURE FOR VISUAL ASSESSMENTS OF COATINGS (ISO 13076:2012) |
| I.S. EN 4476:2011 | AEROSPACE SERIES - PAINTS AND VARNISHES - COLD CURING INTERMEDIATE COAT |
| DIN EN 14879-3:2007-02 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 3: Coatings on concrete components |
| ISO 1514:2016 | Paints and varnishes — Standard panels for testing |
| ISO 2808:2007 | Paints and varnishes Determination of film thickness |
| ISO 15528:2013 | Paints, varnishes and raw materials for paints and varnishes Sampling |
| ISO 1513:2010 | Paints and varnishes Examination and preparation of test samples |
| ISO 3270:1984 | Paints and varnishes and their raw materials — Temperatures and humidities for conditioning and testing |
$118.72
Including GST where applicable
AUD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - French
PDF 1 User - French
PDF 3 Users - French
PDF 5 Users - French
PDF 9 Users - French
Hardcopy - English
PDF 1 User - English
PDF 3 Users - English
PDF 5 Users - English
PDF 9 Users - English
Hardcopy - Russian
PDF 1 User - Russian
PDF 3 Users - Russian
PDF 5 Users - Russian
PDF 9 Users - Russian
Hardcopy - French
PDF 1 User - French
PDF 3 Users - French
PDF 5 Users - French
PDF 9 Users - French
Hardcopy - English
PDF 1 User - English
PDF 3 Users - English
PDF 5 Users - English
PDF 9 Users - English
Hardcopy - Russian
PDF 1 User - Russian
PDF 3 Users - Russian
PDF 5 Users - Russian
PDF 9 Users - Russian
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.