|
11/30239491 DC : 0
|
BS EN 10149-1 - HOT ROLLED FLAT PRODUCTS MADE OF HIGH YIELD STRENGTH STEELS FOR COLD FORMING - PART 1: GENERAL DELIVERY CONDITIONS |
|
ISO 3076:2012
|
Round steel short link chains for general lifting purposes — Medium tolerance sling chains for chain slings — Grade 8 |
|
I.S. EN 10083-1:2006
|
STEELS FOR QUENCHING AND TEMPERING - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS |
|
BS ISO 5832-1:2007
|
IMPLANTS FOR SURGERY - METALLIC MATERIALS - PART 1: WROUGHT STAINLESS STEEL |
|
DIN EN 10210-1:2016-01 (Draft)
|
HOT FINISHED STRUCTURAL HOLLOW SECTIONS OF NON-ALLOY AND FINE GRAIN STEELS - PART 1: TECHNICAL DELIVERY CONDITIONS |
|
11/30239476 DC : 0
|
BS EN 10025-2 - HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR NON-ALLOY STRUCTURAL STEELS |
|
BS ISO 16877:2015
|
ROUND STEEL SHORT LINK CHAINS FOR LIFTING PURPOSES - FINE TOLERANCE HOIST CHAINS FOR HAND OPERATED CHAIN HOISTS - GRADE TH |
|
BS 7252-12:1997
|
METALLIC MATERIALS FOR SURGICAL IMPLANTS - SPECIFICATION FOR WROUGHT COBALT-CHROMIUM-MOLYBDENUM ALLOY |
|
13/30290101 DC : 0
|
BS EN 4700-2 - AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 002: BAR AND SECTION |
|
PREN 1442 : DRAFT 2014
|
LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LPG - DESIGN AND CONSTRUCTION |
|
DIN ISO 5832-5:2008-04
|
IMPLANTS FOR SURGERY - METALLIC MATERIALS - PART 5: WROUGHT COBALT-CHROMIUM-TUNGSTEN-NICKEL ALLOY |
|
11/30239479 DC : 0
|
BS EN 10025-3 - HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR NORMALIZED/NORMALIZED ROLLED WELDABLE FINE GRAIN STRUCTURAL STEELS |
|
11/30239494 DC : 0
|
BS EN 10149-2 - HOT ROLLED FLAT PRODUCTS MADE OF HIGH YIELD STRENGTH STEELS FOR COLD FORMING - PART 2: DELIVERY CONDITIONS FOR THERMOMECHANICALLY ROLLED STEELS |
|
15/30269176 DC : 0
|
BS ISO 6336-5 - CALCULATION OF LOAD CAPACITY OF SPUR AND HELICAL GEARS - PART 5: STRENGTH AND QUALITY OF MATERIALS |
|
15/30310217 DC : 0
|
BS ISO 5832-1 - IMPLANTS FOR SURGERY - METALLIC MATERIALS - PART 1: WROUGHT STAINLESS STEEL |
|
04/30110594 DC : DRAFT MARCH 2004
|
ISO 12732 - CORROSION OF METALS AND ALLOYS - METHOD FOR ELECTROCHEMICAL POTENTIOKINETIC REACTIVATION MEASUREMENT USING THE DOUBLE LOOP METHOD (BASED ON CIHAL'S METHOD) |
|
06/30159843 DC : 0
|
BS ISO 13680 - PETROLEUM AND NATURAL GAS INDUSTRIES - CORROSION - RESISTANT ALLOY SEAMLESS TUBES FOR USE AS CASING, TUBING AND COUPLING STOCK - TECHNICAL DELIVERY CONDITIONS |
|
17/30346753 DC : 0
|
BS ISO 9328-3 - STEEL FLAT PRODUCTS FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 3: WELDABLE FINE GRAIN STEELS, NORMALIZED |
|
DIN EN 10149-1:2013-12
|
HOT ROLLED FLAT PRODUCTS MADE OF HIGH YIELD STRENGTH STEELS FOR COLD FORMING - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS |
|
13/30247437 DC : 0
|
BS EN ISO 683-17 - HEAT-TREATED STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 17: BALL AND ROLLER BEARING STEELS (ISO/DIS 683-17:2013) |
|
ISO 14250:2000
|
Steel Metallographic characterization of duplex grain size and distributions |
|
13/30279057 DC : 0
|
BS ISO 683-4 - HEAT-TREATABLE STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 4: FREE-CUTTING STEELS |
|
ISO 683-3:2016
|
Heat-treatable steels, alloy steels and free-cutting steels Part 3: Case-hardening steels |
|
02/711556 DC : 0
|
LINKS FOR USE WITH STEEL CHAINS OF GRADE 8 |
|
BS EN 4500-003:2012
|
Aerospace series. Metallic materials. Rules for drafting and presentation of material standards Specific rules for heat resisting alloys |
|
11/30191086 DC : 0
|
BS ISO 12633-1 - HOT-FINISHED STRUCTURAL HOLLOW SECTIONS OF NON-ALLOY AND FINE GRAIN STEELS - PART 1: TECHNICAL DELIVERY CONDITIONS |
|
BS EN 4631:2013
|
AEROSPACE SERIES - STEEL X4CRNIMO16-5-1 (1.4418) - AIR MELTED - HARDENED AND TEMPERED - BAR - D[E] <= 200 MM - 900 MPA <= R[M] <= 1050 MPA |
|
12/30258615 DC : 0
|
BS ISO 10384 - HOT-ROLLED CARBON STEEL SHEET AS DEFINED BY CHEMICAL COMPOSITION |
|
BS EN 10343:2009
|
STEELS FOR QUENCHING AND TEMPERING FOR CONSTRUCTION PURPOSES - TECHNICAL DELIVERY CONDITIONS |
|
BS 7252-1:1990
|
METALLIC MATERIALS FOR SURGICAL IMPLANTS - SPECIFICATION FOR WROUGHT STAINLESS STEEL |
|
13/30256266 DC : 0
|
BS ISO 683-18 - HEAT-TREATABLE STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 18: BRIGHT STEEL PRODUCTS |
|
BS ISO 5832-7 : 2016
|
IMPLANTS FOR SURGERY - METALLIC MATERIALS - PART 7: FORGEABLE AND COLD-FORMED COBALT-CHROMIUM-NICKEL-MOLYBDENUM-IRON ALLOY |
|
04/30124490 DC : DRAFT OCT 2004
|
EN 15049 - RAILWAY APPLICATIONS - SUSPENSION COMPONENTS - TORSION BAR, STEEL |
|
BS EN ISO 3266 : 2010
|
FORGED STEEL EYEBOLTS GRADE 4 FOR GENERAL LIFTING PURPOSES (ISO 3266:2010+A1:2015) |
|
UNI EN 4800-006 : 2011
|
AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 006: PRE-PRODUCTION AND PRODUCTION FORGINGS |
|
08/30190263 DC : DRAFT SEP 2008
|
BS EN ISO 11960 - PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR USE AS CASING OR TUBING FOR WELLS |
|
ISO 3077:2001
|
Short-link chain for lifting purposes — Grade T, (types T, DAT and DT), fine-tolerance hoist chain |
|
DIN EN ISO 945-1:2016-09 (Draft)
|
MICROSTRUCTURE OF CAST IRONS - PART 1: GRAPHITE CLASSIFICATION BY VISUAL ANALYSIS |
|
BS EN 10083-3 : 2006-08
|
STEELS FOR QUENCHING AND TEMPERING - PART 3: TECHNICAL DELIVERY CONDITIONS FOR ALLOY STEELS |
|
PREN 4721 : DRAFT 2012
|
AEROSPACE SERIES - STEEL X4CRNIMO16-5-1 (1.4418) - AIR MELTED AND ELECTROSLAG REMELTED (ESR) - HARDENED AND TEMPERED - BAR - D[E] <=200 MM - 900 MPA <= R[M] <= 1050 MPA |
|
UNI EN 4500-003 : 2014
|
AEROSPACE SERIES - METALLIC MATERIALS - RULES FOR DRAFTING AND PRESENTATION OF MATERIAL STANDARDS - PART 003: SPECIFIC RULES FOR HEAT RESISTING ALLOYS |
|
BIS IS/ISO 5832-9 : 2007
|
IMPLANTS FOR SURGERY - METALLIC MATERIALS - PART 9: WROUGHT HIGH NITROGEN STAINLESS STEEL |
|
ISO 22991:2004
|
Gas cylinders Transportable refillable welded steel cylinders for liquefied petroleum gas (LPG) Design and construction |
|
PREN 4500-004 : 200P2
|
AEROSPACE SERIES - METALLIC MATERIALS - RULES FOR DRAFTING AND PRESENTATION OF MATERIAL STANDARDS - PART 004: SPECIFIC RULES FOR TITANIUM AND TITANIUM ALLOYS |
|
PREN 14140 : DRAFT 2012
|
LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LPG - ALTERNATIVE DESIGN AND CONSTRUCTION |
|
PREN 10025-5 : DRAFT 2011
|
HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 5: TECHNICAL DELIVERY CONDITIONS FOR STRUCTURAL STEELS WITH IMPROVED ATMOSPHERIC CORROSION RESISTANCE |
|
BS EN 14917 : 2009
|
METAL BELLOWS EXPANSION JOINTS FOR PRESSURE APPLICATIONS |
|
ISO 9328-7:2018
|
Steel flat products for pressure purposes — Technical delivery conditions — Part 7: Stainless steels |
|
BS EN 12807:2009
|
LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE BRAZED STEEL CYLINDERS FOR LIQUEFIED PETROLEUM GAS (LPG) - DESIGN AND CONSTRUCTION |
|
EN 14917:2009+A1:2012
|
METAL BELLOWS EXPANSION JOINTS FOR PRESSURE APPLICATIONS |
|
NF EN ISO 3266 : 2010 AMD 1 2016
|
FORGED STEEL EYEBOLTS GRADE 4 FOR GENERAL LIFTING PURPOSES |
|
UNI EN ISO 11960 : 2014
|
PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR USE AS CASING OR TUBING FOR WELLS |
|
ISO 5832-14:2007
|
Implants for surgery Metallic materials Part 14: Wrought titanium 15-molybdenum 5-zirconium 3-aluminium alloy |
|
ISO 12633-1:2011
|
Hot-finished structural hollow sections of non-alloy and fine grain steels Part 1: Technical delivery conditions |
|
ISO 4885:2018
|
Ferrous materials — Heat treatments — Vocabulary |
|
EN 10028-3:2017
|
Flat products made of steels for pressure purposes - Part 3: Weldable fine grain steels, normalized |
|
DIN EN 13261:2011-01
|
RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - AXLES - PRODUCT REQUIREMENTS |
|
BS EN 10025-5:2004
|
HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 5: TECHNICAL DELIVERY CONDITIONS FOR STRUCTURAL STEELS WITH IMPROVED ATMOSPHERIC CORROSION RESISTANCE |
|
BS EN 10025-2:2004
|
HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR NON-ALLOY STRUCTURAL STEELS |
|
BS EN 818-3 : 1999
|
SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 3: MEDIUM TOLERANCE CHAIN FOR CHAIN SLINGS - GRADE 4 |
|
BS EN ISO 11960:2014
|
PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR USE AS CASING OR TUBING FOR WELLS |
|
BS EN 13261 : 2009
|
RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - AXLES - PRODUCT REQUIREMENTS |
|
BS EN 10025-3:2004
|
HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR NORMALIZED/NORMALIZED ROLLED WELDABLE FINE GRAIN STRUCTURAL STEELS |
|
I.S. EN 10084:2008
|
CASE HARDENING STEELS - TECHNICAL DELIVERY CONDITIONS |
|
I.S. EN 10218-1:2012
|
STEEL WIRE AND WIRE PRODUCTS - GENERAL - PART 1: TEST METHODS |
|
EN 10149-1:2013
|
HOT ROLLED FLAT PRODUCTS MADE OF HIGH YIELD STRENGTH STEELS FOR COLD FORMING - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS |
|
DIN EN 10025-5:2005-02
|
HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 5: TECHNICAL DELIVERY CONDITIONS FOR STRUCTURAL STEELS WITH IMPROVED ATMOSPHERIC CORROSION RESISTANCE |
|
EN 10277-1:2008
|
Bright steel products - Technical delivery conditions - Part 1: General |
|
EN 10263-1:2017
|
Steel rod, bars and wire for cold heading and cold extrusion - Part 1: General technical delivery conditions |
|
DIN EN 10218-1:2012-03
|
STEEL WIRE AND WIRE PRODUCTS - GENERAL - PART 1: TEST METHODS |
|
EN 10219-1 : 2006
|
COLD FORMED WELDED STRUCTURAL HOLLOW SECTIONS OF NON-ALLOY AND FINE GRAIN STEELS - PART 1: TECHNICAL DELIVERY CONDITIONS |
|
EN 10210-1 : 2006
|
HOT FINISHED STRUCTURAL HOLLOW SECTIONS OF NON-ALLOY AND FINE GRAIN STEELS - PART 1: TECHNICAL DELIVERY CONDITIONS |
|
DIN EN 14330:2004-02
|
Inland navigation vessels - Studless anchor chain - Round steel link chain; German version EN 14330:2003 |
|
EN 10025-1 : 2004
|
HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS |
|
DIN EN 10025-4:2005-02
|
HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 4: TECHNICAL DELIVERY CONDITIONS FOR THERMOMECHANICAL ROLLED WELDABLE FINE GRAIN STRUCTURAL STEELS |
|
ONORM EN 14917 : 2012
|
METAL BELLOWS EXPANSION JOINTS FOR PRESSURE APPLICATIONS |
|
EN 10218-1:2012
|
STEEL WIRE AND WIRE PRODUCTS - GENERAL - PART 1: TEST METHODS |
|
EN 10083-2 : 2006
|
STEELS FOR QUENCHING AND TEMPERING - PART 2: TECHNICAL DELIVERY CONDITIONS FOR NON ALLOY STEELS |
|
DIN EN 13889:2009-02
|
FORGED STEEL SHACKLES FOR GENERAL LIFTING PURPOSES - DEE SHACKLES AND BOW SHACKLES, GRADE 6 - SAFETY |
|
PREN 10025-3 : DRAFT 2011
|
HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR NORMALIZED/NORMALIZED ROLLED WELDABLE FINE GRAIN STRUCTURAL STEELS |
|
I.S. EN 2030:2013
|
AEROSPACE SERIES - STEEL X105CRMO17 (1.3544) - HARDENED AND TEMPERED - BARS - D[E] <= 150 MM |
|
11/30191093 DC : 0
|
BS ISO 10799-1 - COLD FORMED WELDED STRUCTURAL HOLLOW SECTIONS OF NON-ALLOY AND FINE GRAIN STEELS - PART 1: TECHNICAL DELIVERY CONDITIONS |
|
10/30216796 DC : DRAFT SEP 2010
|
BS ISO 3076 - ROUND STEEL SHORT LINK CHAINS FOR GENERAL LIFTING PURPOSES - MEDIUM TOLERANCE SLING CHAINS FOR CHAIN SLINGS - GRADE 8 |
|
14/30268499 DC : 0
|
BS ISO 16872 - ROUND STEEL SHORT LINK CHAINS FOR LIFTING PURPOSES - FINE TOLERANCE HOIST CHAINS FOR HAND OPERATED CHAIN HOISTS - GRADE VH |
|
DIN EN 14917:2012-06
|
Metal bellows expansion joints for pressure applications (includes Amendment A1:2012) |
|
BIS IS/ISO 5832-8 : 1997
|
IMPLANTS FOR SURGERY - METALLIC MATERIALS - PART 8: WROUGHT COBALT-NICKEL-CHROMIUM-MOLYBDENUM-TUNGSTEN-IRON ALLOY |
|
11/30230618 DC : 0
|
BS ISO 683-2 - HEAT-TREATABLE STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 2: ALLOY STEELS FOR QUENCHING AND TEMPERING |
|
BS ISO 5832-14:2007
|
IMPLANTS FOR SURGERY - METALLIC MATERIALS - PART 14: WROUGHT TITANIUM 15-MOLYBDENUM 5-ZIRCONIUM 3-ALUMINIUM ALLOY |
|
ISO 17440:2014
|
Cranes General design Limit states and proof of competence of forged steel hooks |
|
AGMA 2004 : C
|
GEAR MATERIALS, HEAT TREATMENT AND PROCESSING MANUAL |
|
17/30339115 DC : 0
|
ISO/DIS 4978 - STEEL SHEET AND STRIP FOR WELDED GAS CYLINDERS |
|
EN 4700-002:2016
|
AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 002: BAR AND SECTION |
|
17/30368523 DC : 0
|
BS ISO 13782 - IMPLANTS FOR SURGERY - METALLIC MATERIALS - UNALLOYED TANTALUM FOR SURGICAL IMPLANT APPLICATIONS |
|
ISO 5832-2:2018
|
Implants for surgery — Metallic materials — Part 2: Unalloyed titanium |
|
98/705334 DC : DRAFT MAR 1998
|
ISO/CD 12732 - METHOD FOR ELECTROCHEMICAL POTENTIOKINETIC REACTIVATION TEST (BASED ON CIHAL'S METHOD) |
|
UNI EN ISO 12732 : 2008
|
CORROSION OF METALS AND ALLOYS - ELECTROCHEMICAL POTENTIOKINETIC REACTIVATION MEASUREMENT USING THE DOUBLE LOOP METHOD (BASED ON CIHAL'S METHOD) |
|
13/30265064 DC : 0
|
BS ISO 630-5 - STRUCTURAL STEELS - PART 5: TECHNICAL DELIVERY CONDITIONS FOR STRUCTURAL STEELS WITH IMPROVED ATMOSPHERIC CORROSION RESISTANCE |
|
ISO 16877:2015
|
Round steel short link chains for lifting purposes Fine tolerance hoist chains for hand operated chain hoists Grade TH |
|
UNI EN 4800-004 : 2011
|
AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 004: WIRE |
|
BS ISO 12891-2:2014
|
RETRIEVAL AND ANALYSIS OF SURGICAL IMPLANTS - PART 2: ANALYSIS OF RETRIEVED SURGICAL IMPLANTS |
|
UNI EN 4631 : 2013
|
AEROSPACE SERIES - STEEL X4CRNIMO16-5-1 (1.4418) - AIR MELTED - HARDENED AND TEMPERED - BAR - D[E] <= 200 MM - 900 MPA <= R[M] <= 1050 MPA |
|
I.S. EN 4721:2014
|
AEROSPACE SERIES - STEEL X4CRNIMO16-5-1 (1.4418) - AIR MELTED AND ELECTROSLAG REMELTED (ESR) - HARDENED AND TEMPERED - BAR - D[E] <= 200 MM - 900 MPA <= R[M] <= 1050 MPA |
|
06/30155635 DC : 0
|
EN 13261 - RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - AXLES - PRODUCT REQUIREMENTS |
|
UNI EN 4800-005 : 2011
|
AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 005: FORGING STOCK |
|
06/19981869 DC : DRAFT OCT 2006
|
BS ISO 16877 - SHORT LINK CHAIN FOR LIFTING PURPOSES - GRADE TH, FINE TOLERANCE FOR MANUALLY OPERATED CHAIN HOISTS |
|
07/30144593 DC : 0
|
BS ISO 10384 - HOT-ROLLED CARBON STEEL SHEET AS DEFINED BY CHEMICAL COMPOSITION |
|
05/30132585 DC : DRAFT APR 2005
|
EN 10083-1 - STEELS FOR QUENCHING AND TEMPERING - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS |
|
I.S. EN 4800-006:2010
|
AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 006: PRE-PRODUCTION AND PRODUCTION FORGINGS |
|
DIN EN 10025-2:2011-04 (Draft)
|
HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR NON-ALLOY STRUCTURAL STEELS |
|
DIN EN 10343:2009-07
|
STEELS FOR QUENCHING AND TEMPERING FOR CONSTRUCTION PURPOSES - TECHNICAL DELIVERY CONDITIONS |
|
DIN EN 10025-3:2011-04 (Draft)
|
HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR NORMALIZED/NORMALIZED ROLLED WELDABLE FINE GRAIN STRUCTURAL STEELS |
|
DIN 685-2:2001-02
|
ROUND STEEL LINK CHAINS, TESTED - PART 2: SAFETY REQUIREMENTS |
|
ISO 945-1:2017
|
Microstructure of cast irons Part 1: Graphite classification by visual analysis |
|
ISO 16798:2004
|
Links of Grade 8 for use with slings |
|
PREN 764-4 : DRAFT 2012
|
PRESSURE EQUIPMENT - PART 4: ESTABLISHMENT OF TECHNICAL DELIVERY CONDITIONS FOR METALLIC MATERIALS |
|
PREN 10149-2 : DRAFT 2011
|
HOT ROLLED FLAT PRODUCTS MADE OF HIGH YIELD STRENGTH STEELS FOR COLD FORMING - PART 2: DELIVERY CONDITIONS FOR THERMOMECHANICALLY ROLLED STEELS |
|
PREN 10028-3 : DRAFT 2014
|
FLAT PRODUCTS MADE OF STEELS FOR PRESSURE PURPOSES - PART 3: WELDABLE FINE GRAIN STEELS, NORMALIZED |
|
I.S. EN 4800-002:2010
|
AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 002: BAR AND SECTION |
|
ISO 20160:2006
|
Implants for surgery Metallic materials Classification of microstructures for alpha+beta titanium alloy bars |
|
ISO 14661:2000
|
Thermal turbines for industrial applications (steam turbines, gas expansion turbines) General requirements |
|
ISO 683-1:2016
|
Heat-treatable steels, alloy steels and free-cutting steels Part 1: Non-alloy steels for quenching and tempering |
|
DIN EN ISO 945-1 E : 2010
|
MICROSTRUCTURE OF CAST IRONS - PART 1: GRAPHITE CLASSIFICATION BY VISUAL ANALYSIS |
|
UNI EN 12807 : 2009
|
LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE BRAZED STEEL CYLINDERS FOR LIQUEFIED PETROLEUM GAS (LPG) - DESIGN AND CONSTRUCTION |
|
PREN ISO 683-17 : DRAFT 2013
|
HEAT-TREATED STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 17: BALL AND ROLLER BEARING STEELS (ISO/DIS 683-17:2013) |
|
UNE-EN ISO 4885:2017
|
Ferrous materials - Heat treatments - Vocabulary (ISO 4885:2017) |
|
EN ISO 4885:2018
|
FERROUS MATERIALS - HEAT TREATMENTS - VOCABULARY (ISO 4885:2018) |
|
I.S. EN 4629:2013
|
AEROSPACE SERIES - STEEL X4CRNIMO16-5-1 (1.4418) - AIR MELTED - SOFTENED - FORGING STOCK - D[E] <= 300 MM |
|
17/30346741 DC : 0
|
BS EN 10225-1 - WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS - PART 1: PLATES |
|
EN 10083-1 : 2006
|
STEELS FOR QUENCHING AND TEMPERING - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS |
|
EN 10025-3 : 2004
|
HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR NORMALIZED/NORMALIZED ROLLED WELDABLE FINE GRAIN STRUCTURAL STEELS |
|
DIN EN 12807:2016-09 (Draft)
|
LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE BRAZED STEEL CYLINDERS FOR LIQUEFIED PETROLEUM GAS (LPG) - DESIGN AND CONSTRUCTION |
|
ISO 9330-3:1997
|
Welded steel tubes for pressure purposes — Technical delivery conditions — Part 3: Electric resistance and induction welded unalloyed and alloyed steel tubes with specified low temperature properties |
|
ISO 4954:1993
|
Steels for cold heading and cold extruding |
|
DIN EN 10216-5:2014-03
|
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes |
|
DIN EN 1677-4:2009-03
|
COMPONENTS FOR SLINGS - SAFETY - PART 4: LINKS, GRADE 8 |
|
DIN EN 1677-1:2009-03
|
COMPONENTS FOR SLINGS - SAFETY - PART 1: FORGED STEEL COMPONENTS, GRADE 8 |
|
DIN EN 1677-5:2009-03
|
COMPONENTS FOR SLINGS - SAFETY - PART 5: FORGED STEEL LIFTING HOOKS WITH LATCH - GRADE 4 |
|
DIN EN 1442:2008-04
|
LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LPG - DESIGN AND CONSTRUCTION |
|
DIN EN 15049:2007-12
|
Railway applications - Suspension components - Torsion bar, steel |
|
ISO 11960:2014
|
Petroleum and natural gas industries Steel pipes for use as casing or tubing for wells |
|
I.S. EN 10216-3:2013
|
SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 3: ALLOY FINE GRAIN STEEL TUBES |
|
ONORM EN 13261 : 2012
|
RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - AXLES - PRODUCT REQUIREMENTS |
|
I.S. EN 10216-5:2013
|
SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 5: STAINLESS STEEL TUBES |
|
I.S. EN 13889:2003
|
FORGED STEEL SHACKLES FOR GENERAL LIFTING PURPOSES - DEE SHACKLES AND BOW SHACKLES - GRADE 6 - SAFETY |
|
DIN EN 10210-1:2006-07
|
Hot finished structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery conditions |
|
I.S. EN 1677-5:2001
|
COMPONENTS FOR SLINGS - SAFETY - PART 5: FORGED STEEL LIFTING HOOKS WITH LATCH - GRADE 4 |
|
I.S. EN 818-7:2002
|
SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 7: FINE TOLERANCE HOIST CHAIN, GRADE T (TYPES T, DAT AND DT) |
|
I.S. EN 818-3:1999
|
SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 3: MEDIUM TOLERANCE CHAIN FOR CHAIN SLINGS - GRADE 4 |
|
I.S. EN 1677-6:2001
|
COMPONENTS FOR SLINGS - SAFETY - PART 6: LINKS - GRADE 4 |
|
I.S. EN 1677-4:2001
|
COMPONENTS FOR SLINGS - SAFETY - PART 4: LINKS, GRADE 8 |
|
I.S. EN 10028-7:2016&LC:2016
|
FLAT PRODUCTS MADE OF STEELS FOR PRESSURE PURPOSES - PART 7: STAINLESS STEELS |
|
I.S. EN 1442:2017
|
LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LPG - DESIGN AND CONSTRUCTION |
|
I.S. EN 14140:2014
|
LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LPG - ALTERNATIVE DESIGN AND CONSTRUCTION |
|
I.S. EN 10149-1:2013
|
HOT ROLLED FLAT PRODUCTS MADE OF HIGH YIELD STRENGTH STEELS FOR COLD FORMING - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS |
|
I.S. EN 10028-3:2017
|
FLAT PRODUCTS MADE OF STEELS FOR PRESSURE PURPOSES - PART 3: WELDABLE FINE GRAIN STEELS, NORMALIZED |
|
I.S. EN ISO 11960:2014
|
PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR USE AS CASING OR TUBING FOR WELLS (ISO 11960:2014) |
|
I.S. EN 10219-1:2006
|
COLD FORMED WELDED STRUCTURAL HOLLOW SECTIONS OF NON-ALLOY AND FINE GRAIN STEELS - PART 1: TECHNICAL DELIVERY CONDITIONS |
|
I.S. EN 10083-2:2006
|
STEELS FOR QUENCHING AND TEMPERING - PART 2: TECHNICAL DELIVERY CONDITIONS FOR NON ALLOY STEELS |
|
I.S. EN ISO 683-17:2014
|
HEAT-TREATED STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 17: BALL AND ROLLER BEARING STEELS (ISO 683-17:2014) |
|
DIN EN 10028-3:2017-10
|
FLAT PRODUCTS MADE OF STEELS FOR PRESSURE PURPOSES - PART 3: WELDABLE FINE GRAIN STEELS, NORMALIZED |
|
DIN EN 818-3:2008-12
|
SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 3: MEDIUM TOLERANCE CHAIN FOR CHAIN SLINGS - GRADE 4 |
|
I.S. EN 10210-1:2006
|
HOT FINISHED STRUCTURAL HOLLOW SECTIONS OF NON-ALLOY AND FINE GRAIN STEELS - PART 1: TECHNICAL DELIVERY CONDITIONS |
|
I.S. EN 1677-1:2000
|
COMPONENTS FOR SLINGS - SAFETY - PART 1: FORGED STEEL COMPONENTS, GRADE 8 |
|
DIN EN 10083-3:2007-01
|
STEELS FOR QUENCHING AND TEMPERING - PART 3: TECHNICAL DELIVERY CONDITIONS FOR ALLOY STEELS |
|
I.S. EN 764-4:2014
|
PRESSURE EQUIPMENT - PART 4: ESTABLISHMENT OF TECHNICAL DELIVERY CONDITIONS FOR METALLIC MATERIALS |
|
I.S. EN 818-2:1997
|
SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 2: MEDIUM TOLERANCE CHAIN FOR CHAIN SLINGS - GRADE 8 |
|
DIN ISO 5832-9:2008-12
|
IMPLANTS FOR SURGERY - METALLIC MATERIALS - PART 9: WROUGHT HIGH NITROGEN STAINLESS STEEL |
|
I.S. EN 10277-1:2008
|
BRIGHT STEEL PRODUCTS - TECHNICAL DELIVERY CONDITIONS - PART 1: GENERAL |
|
DIN EN 10277-1:2008-06
|
BRIGHT STEEL PRODUCTS - TECHNICAL DELIVERY CONDITIONS - PART 1: GENERAL |
|
DIN EN 10025-1:2005-02
|
Hot rolled products of structural steels - Part 1: General technical delivery conditions; German version EN 10025-1:2004 |
|
UNI EN 1677-6 : 2009
|
COMPONENTS FOR SLINGS - SAFETY - PART 6: LINKS - GRADE 4 |
|
BS 7252-1:1997
|
METALLIC MATERIALS FOR SURGICAL IMPLANTS - SPECIFICATION FOR WROUGHT STAINLESS STEEL |
|
BS 7252-8:1997
|
METALLIC MATERIALS FOR SURGICAL IMPLANTS - SPECIFICATION FOR WROUGHT COBALT-NICKEL-CHROMIUM-MOLYBDENUM-TUNGSTEN-IRON ALLOY |
|
BS 7252-6:1997
|
METALLIC MATERIALS FOR SURGICAL IMPLANTS - SPECIFICATION FOR WROUGHT COBALT-NICKEL-CHROMIUM-MOLYBDENUM ALLOY |
|
VDI 3405 Blatt 2:2013-08
|
Additive manufacturing processes, rapid manufacturing- Beam melting of metallic parts- Qualification, quality assurance and post processing
|
|
DIN ISO 5832-12 E : 2009
|
IMPLANTS FOR SURGERY - METALLIC MATERIALS - PART 12: WROUGHT COBALT-CHROMIUM-MOLYBDENUM ALLOY |
|
DIN EN ISO 4885 E : 2017
|
FERROUS MATERIALS - HEAT TREATMENTS - VOCABULARY (ISO 4885:2017) |
|
UNI EN 2030 : 2014
|
AEROSPACE SERIES - STEEL X105CRMO17 (1.3544) - HARDENED AND TEMPERED - BARS - D[E] <= 150 MM |
|
17/30339425 DC : 0
|
BS ISO 5948 - RAILWAY ROLLING STOCK MATERIAL - ULTRASONIC ACCEPTANCE TESTING |
|
GOST R EN 818-3 : 2005
|
SHORT LINK STEEL CHAINS FOR LIFTING PURPOSES - SAFETY - PART 3: MEDIUM TOLERANCE STEEL CHAINS FOR GRADE 4 CHAIN SLINGS |
|
16/30332608 DC : DRAFT JAN 2016
|
BS EN 10210-2 - HOT FINISHED STRUCTURAL STEEL HOLLOW SECTIONS - PART 2: TECHNICAL DELIVERY CONDITIONS |
|
BS EN 4700-004 : 2010
|
AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 004: WIRE |
|
BS 7252-7:1990
|
Metallic materials for surgical implants Specification for cobalt-chromium-nickel-molybdenum-iron alloy |
|
12/30259070 DC : 0
|
BS EN 764-4 - PRESSURE EQUIPMENT - PART 4: ESTABLISHMENT OF TECHNICAL DELIVERY CONDITIONS FOR METALLIC MATERIALS |
|
I.S. EN 10025-2:2004
|
HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR NON-ALLOY STRUCTURAL STEELS |
|
11/30243868 DC : 0
|
BS EN 4630 - AEROSPACE SERIES - STEEL FE-PM 3504 (X4CRNIMO16-5-1) - AIR MELTED - HARDENED AND TEMPERED - FORGINGS - D[E] <= 200 MM - 900 MPA <= R[M] <= 1050 MPA |
|
BS EN 4721:2014
|
AEROSPACE SERIES - STEEL X4CRNIMO16-5-1 (1.4418) - AIR MELTED AND ELECTROSLAG REMELTED (ESR) - HARDENED AND TEMPERED - BAR - D[E] <= 200 MM - 900 MPA <= R[M] <= 1050 MPA |
|
ISO 2604-6:1978
|
Steel products for pressure purposes Quality requirements Part 6: Submerged arc longitudinally or spirally welded steel tubes |
|
14/30295082 DC : 0
|
BS ISO 683-3 - HEAT-TREATABLE STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 3: CASE HARDENING STEELS |
|
PREN 10025-4 : DRAFT 2011
|
HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 4: TECHNICAL DELIVERY CONDITIONS FOR THERMOMECHANICAL ROLLED WELDABLE FINE GRAIN STRUCTURAL STEELS |
|
BS EN 4700-002:2016
|
AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 002: BAR AND SECTION |
|
03/111274 DC : DRAFT AUG 2003
|
ISO 9328-5 - STEEL PLATES AND STRIPS FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 5: WELDABLE FINE GRAIN STEELS, THERMOMECHANICALLY ROLLED |
|
09/30196511 DC : 0
|
BS ISO 9328-7 - STEEL FLAT PRODUCTS FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 7: STAINLESS STEELS |
|
UNI EN 4700-004 : 2011
|
Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 004: Wire |
|
BS EN 4800-006 : 2010
|
AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 006: PRE-PRODUCTION AND PRODUCTION FORGINGS |
|
18/30362597 DC : 0
|
BS ISO 5832-12 - IMPLANTS FOR SURGERY - METALLIC MATERIALS - PART 12: WROUGHT COBALT-CHROMIUM-MOLYBDENUM ALLOY |
|
UNI EN 4500-004 : 2014
|
AEROSPACE SERIES - METALLIC MATERIALS - RULES FOR DRAFTING AND PRESENTATION OF MATERIAL STANDARDS - PART 004: SPECIFIC RULES FOR TITANIUM AND TITANIUM ALLOYS |
|
BS EN 4800-005 : 2010
|
AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 005: FORGING STOCK |
|
UNI EN 10216-5 : 2014
|
SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 5: STAINLESS STEEL TUBES |
|
BS ISO 11891:2012
|
HOT FORMED HELICAL COMPRESSION SPRINGS - TECHNICAL SPECIFICATIONS |
|
17/30346735 DC : 0
|
BS EN 10225-3 - WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS - PART 3: HOT FINISHED HOLLOW SECTIONS |
|
11/30239482 DC : 0
|
BS EN 10025-4 - HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 4: TECHNICAL DELIVERY CONDITIONS FOR THERMOMECHANICAL ROLLED WELDABLE FINE GRAIN STRUCTURAL STEELS |
|
11/30239473 DC : 0
|
BS EN 10025-1 - HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS |
|
ONORM EN 10216-5 : 2014
|
SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 5: STAINLESS STEEL TUBES |
|
12/30248681 DC : 0
|
BS EN 14140 - LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LPG - ALTERNATIVE DESIGN AND CONSTRUCTION |
|
ISO 10384:2012
|
Hot-rolled carbon steel sheet as defined by chemical composition |
|
EN 13001-3-5:2016
|
Cranes - General design - Part 3-5: Limit states and proof of competence of forged hooks |
|
06/19981867 DC : DRAFT OCT 2006
|
BS ISO 16872 - SHORT LINK CHAIN FOR LIFTING PURPOSES - GRADE VH, FINE TOLERANCE FOR MANUALLY OPERATED CHAIN HOISTS |
|
BS EN 4800-004 : 2010
|
AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 004: WIRE |
|
BS EN 4630:2014
|
AEROSPACE SERIES - STEEL X4CRNIMO16-5-1 (1.4418) - AIR MELTED - HARDENED AND TEMPERED - FORGINGS - D[E] <= 200 MM - 900 MPA <= R[M] <= 1050 MPA |
|
11/30230615 DC : 0
|
BS ISO 683-1 - HEAT-TREATABLE STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 1: NON-ALLOY STEELS FOR QUENCHING AND TEMPERING |
|
I.S. EN 4500-004:2012
|
AEROSPACE SERIES - METALLIC MATERIALS - RULES FOR DRAFTING AND PRESENTATION OF MATERIAL STANDARDS - PART 004: SPECIFIC RULES FOR TITANIUM AND TITANIUM ALLOYS |
|
06/30099306 DC : DRAFT JUN 2006
|
BS ISO 5832-9 - IMPLANTS FOR SURGERY - METALLIC MATERIALS - PART 9: WROUGHT HIGH NITROGEN STAINLESS STEEL |
|
BS ISO 14661:2000
|
THERMAL TURBINES FOR INDUSTRIAL APPLICATIONS (STEAM TURBINES, GAS EXPANSION TURBINES) - GENERAL REQUIREMENTS |
|
05/30132603 DC : DRAFT APR 2005
|
EN 10083-3 - STEELS FOR QUENCHING AND TEMPERING - PART 3: TECHNICAL DELIVERY CONDITIONS FOR ALLOY STEELS |
|
BS EN 4500-004:2012
|
Aerospace series. Metallic materials. Rules for drafting and presentation of material standards Specific rules for titanium and titanium alloys |
|
DIN EN 14917 E : 2012
|
METAL BELLOWS EXPANSION JOINTS FOR PRESSURE APPLICATIONS |
|
I.S. EN 4500-003:2012
|
AEROSPACE SERIES - METALLIC MATERIALS - RULES FOR DRAFTING AND PRESENTATION OF MATERIAL STANDARDS - PART 003: SPECIFIC RULES FOR HEAT RESISTING ALLOYS |
|
I.S. EN ISO 4885:2017
|
FERROUS MATERIALS - HEAT TREATMENTS - VOCABULARY (ISO 4885:2018) |
|
BS EN 10025-4:2004
|
HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 4: TECHNICAL DELIVERY CONDITIONS FOR THERMOMECHANICAL ROLLED WELDABLE FINE GRAIN STRUCTURAL STEELS |
|
I.S. EN ISO 12732:2008
|
CORROSION OF METALS AND ALLOYS - ELECTROCHEMICAL POTENTIOKINETIC REACTIVATION MEASUREMENT USING THE DOUBLE LOOP METHOD (BASED ON CIHAL'S METHOD) |
|
I.S. EN ISO 5832-2:2012
|
IMPLANTS FOR SURGERY - METALLIC MATERIALS - PART 2: UNALLOYED TITANIUM (ISO 5832-2:2018) |
|
PREN 10210-2 : DRAFT 2016
|
HOT FINISHED STRUCTURAL STEEL HOLLOW SECTIONS - PART 2: TECHNICAL DELIVERY CONDITIONS |
|
I.S. EN 4700-001:2010
|
AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 001: PLATE, SHEET AND STRIP |
|
UNI EN 4700-003 : 2011
|
AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 003: TUBE |
|
ISO 5832-12:2007
|
Implants for surgery Metallic materials Part 12: Wrought cobalt-chromium-molybdenum alloy |
|
I.S. EN 4800-004:2010
|
AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 004: WIRE |
|
ISO 683-18:2014
|
Heat-treatable steels, alloy steels and free-cutting steels Part 18: Bright steel products |
|
KTA 3211.1 : 2015
|
PRESSURE AND ACTIVITY RETAINING COMPONENTS OF SYSTEMS OUTSIDE THE PRIMARY CIRCUIT - PART 1: MATERIALS |
|
I.S. EN 10025-3:2004
|
HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR NORMALIZED/NORMALIZED ROLLED WELDABLE FINE GRAIN STRUCTURAL STEELS |
|
ISO 5832-5:2005
|
Implants for surgery Metallic materials Part 5: Wrought cobalt-chromium-tungsten-nickel alloy |
|
PREN 10025-2 : DRAFT 2011
|
HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR NON-ALLOY STRUCTURAL STEELS |
|
EN 10025-2:2004/AC:2005
|
HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR NON-ALLOY STRUCTURAL STEELS |
|
ISO 2604-2:1975
|
Steel products for pressure purposes Quality requirements Part 2: Wrought seamless tubes |
|
ISO 11891:2012
|
Hot formed helical compression springs Technical specifications |
|
ISO 7593:1986
|
Chain slings assembled by methods other than welding — Grade T(8) |
|
ISO 5832-7:2016
|
Implants for surgery Metallic materials Part 7: Forgeable and cold-formed cobalt-chromium-nickel-molybdenum-iron alloy |
|
I.S. EN 4627:2014
|
AEROSPACE SERIES - STEEL X4CRNIMO16-5-1 (1.4418) - AIR MELTED - HARDENED AND TEMPERED - FORGINGS - D[E] <= 200 MM - 1150 MPA <= R[M] <= 1300 MPA |
|
I.S. EN 15566:2016
|
RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK - DRAW GEAR AND SCREW COUPLING |
|
ISO 6336-5:2016
|
Calculation of load capacity of spur and helical gears Part 5: Strength and quality of materials |
|
I.S. EN 14917:2009
|
METAL BELLOWS EXPANSION JOINTS FOR PRESSURE APPLICATIONS |
|
ISO 5832-9:2007
|
Implants for surgery Metallic materials Part 9: Wrought high nitrogen stainless steel |
|
EN 10028-7:2016
|
Flat products made of steels for pressure purposes - Part 7: Stainless steels |
|
DIN EN 10083-1:2006-10
|
STEELS FOR QUENCHING AND TEMPERING - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS |
|
DIN EN ISO 683-17:2015-02
|
HEAT-TREATED STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 17: BALL AND ROLLER BEARING STEELS (ISO 683-17:2014) |
|
DIN EN 1677-6:2009-03
|
COMPONENTS FOR SLINGS - SAFETY - PART 6: LINKS - GRADE 4 |
|
DIN EN 818-2:2008-12
|
SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 2: MEDIUM TOLERANCE CHAIN FOR CHAIN SLINGS - GRADE 8 |
|
DIN EN 10216-3:2014-03
|
SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 3: ALLOY FINE GRAIN STEEL TUBES |
|
DIN EN ISO 11960:2014-05
|
Petroleum and natural gas industries - Steel pipes for use as casing or tubing for wells (ISO 11960:2014); English version EN ISO 11960:2014, only on CD-ROM |
|
DIN EN 14140:2015-03
|
LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LPG - ALTERNATIVE DESIGN AND CONSTRUCTION |
|
BS EN 13889 : 2003
|
FORGED STEEL SHACKLES FOR GENERAL LIFTING PURPOSES - DEE SHACKLES AND BOW SHACKLES - GRADE 6 - SAFETY |
|
UNE-EN 764-4:2015
|
Pressure equipment - Part 4: Establishment of technical delivery conditions for metallic materials |
|
ISO 13782:1996
|
Implants for surgery Metallic materials Unalloyed tantalum for surgical implant applications |
|
UNI EN 13261 : 2011
|
RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - AXLES - PRODUCT REQUIREMENTS |
|
EN 13261:2009+A1:2010
|
RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - AXLES - PRODUCT REQUIREMENTS |
|
UNI EN 1677-1 : 2009
|
COMPONENTS FOR SLINGS - SAFETY - PART 1: FORGED STEEL COMPONENTS, GRADE 8 |
|
UNI EN ISO 683-17 : 2014
|
HEAT-TREATED STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 17: BALL AND ROLLER BEARING STEELS |
|
UNI EN 1677-4 : 2009
|
COMPONENTS FOR SLINGS - SAFETY - PART 4: LINKS, GRADE 8 |
|
UNI EN 10083-1 : 2006
|
STEELS FOR QUENCHING AND TEMPERING - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS |
|
UNI EN 10219-1 : 2006
|
COLD FORMED WELDED STRUCTURAL HOLLOW SECTIONS OF NON-ALLOY AND FINE GRAIN STEELS - PART 1: TECHNICAL DELIVERY CONDITIONS |
|
UNI EN 13889 : 2009
|
FORGED STEEL SHACKLES FOR GENERAL LIFTING PURPOSES - DEE SHACKLES AND BOW SHACKLES - GRADE 6: SAFETY |
|
UNI EN 10083-3 : 2006
|
STEELS FOR QUENCHING AND TEMPERING - PART 3: TECHNICAL DELIVERY CONDITIONS FOR ALLOY STEELS |
|
UNI EN 10218-1 : 2012
|
STEEL WIRE AND WIRE PRODUCTS - GENERAL - PART 1: TEST METHODS |
|
UNI EN 818-3 : 2008
|
SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 3: MEDIUM TOLERANCE CHAIN FOR CHAIN SLINGS - GRADE 4 |
|
UNI EN 818-7 : 2008
|
SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 7: FINE TOLERANCE HOIST CHAIN, GRADE T (TYPES T, DAT AND DT) |
|
UNI EN 10084 : 2008
|
CASE HARDENING STEELS - TECHNICAL DELIVERY CONDITIONS |
|
UNI EN 14140 : 2015
|
LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LPG - ALTERNATIVE DESIGN AND CONSTRUCTION |
|
UNI EN 10216-3 : 2014
|
SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 3: ALLOY FINE GRAIN STEEL TUBES |
|
UNI EN 1677-5 : 2009
|
COMPONENTS FOR SLINGS - SAFETY - PART 5: FORGED STEEL LIFTING HOOKS WITH LATCH - GRADE 4 |
|
UNI EN 818-2 : 2008
|
SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 2: MEDIUM TOLERANCE CHAIN FOR CHAIN SLINGS - GRADE 8 |
|
UNI EN 10149-1 : 2013
|
HOT ROLLED FLAT PRODUCTS MADE OF HIGH YIELD STRENGTH STEELS FOR COLD FORMING - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS |
|
UNI EN 4800-001 : 2011
|
AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 001: PLATE, SHEET AND STRIP |
|
10/30198921 DC : 0
|
BS ISO 11891 - HOT FORMED HELICAL COMPRESSION SPRINGS - TECHNICAL SPECIFICATIONS |
|
AGMA 923 : B
|
METALLURGICAL SPECIFICATIONS OF STEEL GEARING |
|
11/30243869 DC : 0
|
BS EN 4631 - AEROSPACE SERIES - STEEL FE-PM 3504 (X4CRNIMO16-5-1) - AIR MELTED - HARDENED AND TEMPERED - BAR - D[E] <= 200 MM - 900 MPA <= R[M] <= 1050 MPA |
|
UNI EN 4800-003 : 2011
|
AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 003: TUBE |
|
ISO 9330-5:2000
|
Welded steel tubes for pressure purposes — Technical delivery conditions — Part 5: Submerged arc-welded unalloyed and alloyed steel tubes with specified low temperature properties |
|
DIN ISO 5832-7:2001-07
|
IMPLANTS FOR SURGERY - METALLIC MATERIALS - PART 7: FORGEABLE AND COLD-FORMED COBALT-CHROMIUM-NICKEL-MOLYBDENUM-IRON ALLOY (ISO 5832-7:2016) |
|
BS ISO 20160:2006
|
IMPLANTS FOR SURGERY - METALLIC MATERIALS - CLASSIFICATION OF MICROSTRUCTURES FOR ALPHA+BETA TITANIUM ALLOY BARS |
|
I.S. EN 10025-1:2004
|
HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS |
|
EN 10216-5:2013
|
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes |
|
14/30300966 DC : 0
|
BS EN 1442 - LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LPG - DESIGN AND CONSTRUCTION |
|
06/30086672 DC : DRAFT JUN 2006
|
BS ISO 5832-12 - IMPLANTS FOR SURGERY - METALLIC MATERIALS - PART 12: WROUGHT COBALT-CHROMIUM-MOLYBDENUM ALLOY |
|
BS ISO 683-5:2017
|
Heat treatable steels, alloy steels and free-cutting steels Nitriding steels |
|
00/704586 DC : DRAFT JAN 2000
|
ISO/DIS 3077 - SHORT-LINK CHAIN FOR LIFTING PURPOSES |
|
13/30268502 DC : 0
|
BS ISO 16877 - ROUND STEEL SHORT LINK CHAINS FOR LIFTING PURPOSES - FINE TOLERANCE HOIST CHAINS FOR HAND OPERATED CHAIN HOISTS - GRADE TH |
|
DIN EN ISO 3266:2016-05
|
FORGED STEEL EYEBOLTS GRADE 4 FOR GENERAL LIFTING PURPOSES (ISO 3266:2010 + AMD 1:2015) |
|
17/30346738 DC : 0
|
BS EN 10225-2 - WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS - PART 2: SECTIONS |
|
12/30252148 DC : 0
|
BS ISO 17440 - CRANES - GENERAL DESIGN - LIMIT STATES AND PROOF OF COMPETENCE OF FORGED STEEL HOOKS |
|
UNI EN 10343 : 2009
|
STEELS FOR QUENCHING AND TEMPERING FOR CONSTRUCTION PURPOSES - TECHNICAL DELIVERY CONDITIONS |
|
BS EN 4627:2014
|
Aerospace series. Steel X4CrNiMo16-5-1 (1.4418). Air melted. Hardened and tempered. Forgings. De ≤ 200 mm. 1 150 MPa ≤ Rm ≤ 1 300 MPa |
|
17/30346765 DC : 0
|
BS ISO 9328-7 - STEEL FLAT PRODUCTS FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 7: STAINLESS STEELS |
|
BS EN 4700-003:2010
|
AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 003: TUBE |
|
DIN ISO 5832-14:2009-12
|
IMPLANTS FOR SURGERY - METALLIC MATERIALS - PART 14: WROUGHT TITANIUM 15-MOLYBDENUM 5-ZIRCONIUM 3-ALUMINIUM ALLOY |
|
BS EN 4800-001 : 2010
|
AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 1: PLATE, SHEET AND STRIP |
|
14/30294825 DC : 0
|
BS EN 10263-1 - STEEL ROD, BARS AND WIRE FOR COLD HEADING AND COLD EXTRUSION - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS |
|
BS EN 2030:2013
|
AEROSPACE SERIES - STEEL X105CRMO17 (1.3544) - HARDENED AND TEMPERED - BARS - D[E] <= 150 MM |
|
BS ISO 17440:2014
|
CRANES - GENERAL DESIGN - LIMIT STATES AND PROOF OF COMPETENCE OF FORGED STEEL HOOKS |
|
UNI EN 14917 : 2012
|
METAL BELLOWS EXPANSION JOINTS FOR PRESSURE APPLICATIONS |
|
BS ISO 16872:2015
|
ROUND STEEL SHORT LINK CHAINS FOR LIFTING PURPOSES - FINE TOLERANCE HOIST CHAINS FOR HAND OPERATED CHAIN HOISTS - GRADE VH |
|
BS EN 4800-002 : 2010
|
AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 2: BAR AND SECTION |
|
11/30230612 DC : 0
|
BS ISO 683-11 - HEAT-TREATABLE STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 11: CASE-HARDENING STEELS |
|
BS EN 4800-003:2010
|
Aerospace series. Titanium and titanium alloys. Technical specification Tube |
|
13/30242622 DC : 0
|
BS ISO 12891-2 - RETRIEVAL AND ANALYSIS OF SURGICAL IMPLANTS - PART 2: ANALYSIS OF RETRIEVED SURGICAL IMPLANTS |
|
ISO 9329-3:1997
|
Seamless steel tubes for pressure purposes — Technical delivery conditions — Part 3: Unalloyed and alloyed steels with specified low temperature properties |
|
16/30326542 DC : 0
|
BS ISO 5832-7 - IMPLANTS FOR SURGERY - METALLIC MATERIALS - PART 7: FORGEABLE AND COLD-FORMED COBALT-CHROMIUM-NICKEL-MOLYBDENUM-IRON ALLOY |
|
03/111275 DC : DRAFT AUG 2003
|
ISO 9328-6 - STEEL PLATES AND STRIPS FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 6: WELDABLE FINE GRAIN STEELS, QUENCHED AND TEMPERED |
|
BS ISO 12732 : 2006
|
CORROSION OF METALS AND ALLOYS - ELECTROCHEMICAL POTENTIOKINETIC REACTIVATION MEASUREMENT USING THE DOUBLE LOOP METHOD (BASED ON CIHAL'S METHOD) |
|
ISO 16872:2015
|
Round steel short link chains for lifting purposes Fine tolerance hoist chains for hand operated chain hoists Grade VH |
|
03/111272 DC : DRAFT AUG 2003
|
ISO 9328-3 - STEEL PLATES AND STRIPS FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 3: WELDABLE FINE GRAIN STEELS, NORMALIZED |
|
ISO 10799-1:2011
|
Cold-formed welded structural hollow sections of non-alloy and fine grain steels Part 1: Technical delivery conditions |
|
UNI EN 4627 : 2014
|
AEROSPACE SERIES - STEEL X4CRNIMO16-5-1 (1.4418) - AIR MELTED - HARDENED AND TEMPERED - FORGINGS - D[E] <= 200 MM - 1150 MPA <= R[M] <= 1300 MPA |
|
BS ISO 5832-5:2005 (published 2009-02)
|
Implants for surgery. Metallic materials Wrought cobalt-chromium-tungsten-nickel alloy |
|
DIN EN 10025-4:2011-04 (Draft)
|
HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 4: TECHNICAL DELIVERY CONDITIONS FOR THERMOMECHANICAL ROLLED WELDABLE FINE GRAIN STRUCTURAL STEELS |
|
BS ISO 5832-12:2007
|
IMPLANTS FOR SURGERY - METALLIC MATERIALS - PART 12: WROUGHT COBALT-CHROMIUM-MOLYBDENUM ALLOY |
|
BS EN 15566:2016
|
Railway applications. Railway rolling stock. Draw gear and screw coupling |
|
PREN 4631 : 200P2
|
AEROSPACE SERIES - STEEL X4CRNIMO16-5-1 (1.4418) - AIR MELTED - HARDENED AND TEMPERED - BAR - D[E] <= 200 MM - 900 MPA <= R[M] <= 1050 MPA |
|
PREN 4629 : 200P2
|
AEROSPACE SERIES - STEEL X4CRNIMO16-5-1 (1.4418) - AIR MELTED - SOFTENED - FORGING STOCK - D[E] <= 300 MM |
|
ISO 10799:2001
|
Structural steels Cold-formed, welded, structural hollow sections Technical delivery requirements |
|
I.S. EN 4800-005:2010
|
AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 005: FORGING STOCK |
|
I.S. EN 10025-4:2004
|
HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 4: TECHNICAL DELIVERY CONDITIONS FOR THERMOMECHANICAL ROLLED WELDABLE FINE GRAIN STRUCTURAL STEELS |
|
I.S. EN 10025-5:2004
|
HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 5: TECHNICAL DELIVERY CONDITIONS FOR STRUCTURAL STEELS WITH IMPROVED ATMOSPHERIC CORROSION RESISTANCE |
|
ONORM EN ISO 11960 : 2014
|
PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR USE AS CASING OR TUBING FOR WELLS (ISO 11960:2014) |
|
ISO 9328-5:2018
|
Steel flat products for pressure purposes — Technical delivery conditions — Part 5: Weldable fine grain steels, thermomechanically rolled |
|
I.S. EN ISO 3266:2010
|
FORGED STEEL EYEBOLTS GRADE 4 FOR GENERAL LIFTING PURPOSES (ISO 3266:2010) |
|
ISO 5832-1:2016
|
Implants for surgery Metallic materials Part 1: Wrought stainless steel |
|
ISO/TR 11637:1997
|
Boron treated engineering steels for quenching and tempering |
|
ISO 2415:2004
|
Forged shackles for general lifting purposes — Dee shackles and bow shackles |
|
BIS IS/ISO 5832-5 : 2005
|
IMPLANTS FOR SURGERY - METALLIC MATERIALS - PART 5: WROUGHT COBALT-CHROMIUM-TUNGSTEN-NICKEL ALLOY |
|
UNI EN 4700-001 : 2011
|
AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 001: PLATE, SHEET AND STRIP |
|
ASTM F 3160 : 2016
|
Standard Guide for Metallurgical Characterization of Absorbable Metallic Materials for Medical Implants |
|
EN ISO 5832-2:2018
|
IMPLANTS FOR SURGERY - METALLIC MATERIALS - PART 2: UNALLOYED TITANIUM (ISO 5832-2:2018) |
|
ISO 683-5:2017
|
Heat treatable steels, alloy steels and free-cutting steels — Part 5: Nitriding steels |
|
ISO 12891-2:2014
|
Retrieval and analysis of surgical implants Part 2: Analysis of retrieved surgical implants |
|
ISO 630-5:2014
|
Structural steels Part 5: Technical delivery conditions for structural steels with improved atmospheric corrosion resistance |
|
EN 10025-4:2004
|
HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 4: TECHNICAL DELIVERY CONDITIONS FOR THERMOMECHANICAL ROLLED WELDABLE FINE GRAIN STRUCTURAL STEELS |
|
ISO 8539:2009
|
Forged steel lifting components for use with Grade 8 chain |
|
EN 12807:2009
|
LPG equipment and accessories - Transportable refillable brazed steel cylinders for liquefied petroleum gas (LPG) - Design and construction |
|
EN ISO 945-1:2018
|
MICROSTRUCTURE OF CAST IRONS - PART 1: GRAPHITE CLASSIFICATION BY VISUAL ANALYSIS (ISO 945-1:2017) |
|
ISO 5832-6:1997
|
Implants for surgery Metallic materials Part 6: Wrought cobalt-nickel-chromium-molybdenum alloy |
|
ISO 5832-8:1997
|
Implants for surgery Metallic materials Part 8: Wrought cobalt-nickel-chromium-molybdenum- tungsten-iron alloy |
|
ISO 683-11:2012
|
Heat-treatable steels, alloy steels and free-cutting steels Part 11: Case-hardening steels |
|
I.S. EN 10263-1:2017
|
STEEL ROD, BARS AND WIRE FOR COLD HEADING AND COLD EXTRUSION - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS |
|
I.S. EN 12807:2009
|
LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE BRAZED STEEL CYLINDERS FOR LIQUEFIED PETROLEUM GAS (LPG) - DESIGN AND CONSTRUCTION |
|
DIN EN 818-7:2008-07
|
SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 7: FINE TOLERANCE HOIST CHAIN, GRADE T (TYPES T, DAT AND DT) |
|
DIN EN 15049 E : 2007
|
RAILWAY APPLICATIONS - SUSPENSION COMPONENTS - TORSION BAR, STEEL |
|
DIN EN 10084:2008-06
|
CASE HARDENING STEELS - TECHNICAL DELIVERY CONDITIONS |
|
DIN EN 10219-1:2016-01 (Draft)
|
COLD FORMED WELDED STRUCTURAL HOLLOW SECTIONS OF NON-ALLOY AND FINE GRAIN STEELS - PART 1: TECHNICAL DELIVERY CONDITIONS |
|
BS EN 10028-3:2017
|
Flat products made of steels for pressure purposes Weldable fine grain steels, normalized |
|
UNE-EN 14140:2015
|
LPG equipment and accessories - Transportable refillable welded steel cylinders for LPG - Alternative design and construction |
|
BS EN 10216-5:2013 (published 2013-12)
|
Seamless steel tubes for pressure purposes. Technical delivery conditions Stainless steel tubes |
|
BS EN 10025-1:2004
|
HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS |
|
BS EN 10084 : 2008-06
|
CASE HARDENING STEELS - TECHNICAL DELIVERY CONDITIONS |
|
ISO 3266:2010
|
Forged steel eyebolts grade 4 for general lifting purposes |
|
BS EN 1677-1 : 2000
|
COMPONENTS FOR SLINGS - SAFETY - PART 1: FORGED STEEL COMPONENTS, GRADE 8 |
|
BS EN 10216-3:2013 (published 2013-12)
|
Seamless steel tubes for pressure purposes. Technical delivery conditions Alloy fine grain steel tubes |
|
BS EN 10083-2:2006
|
STEELS FOR QUENCHING AND TEMPERING - PART 2: TECHNICAL DELIVERY CONDITIONS FOR NON ALLOY STEELS |
|
BS EN 818-7 : 2002
|
SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 7: FINE TOLERANCE HOIST CHAIN, GRADE T (TYPES T, DAT AND DT) |
|
BS EN 14140:2014
|
LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LPG - ALTERNATIVE DESIGN AND CONSTRUCTION |
|
ISO 12732:2006
|
Corrosion of metals and alloys Electrochemical potentiokinetic reactivation measurement using the double loop method (based on Cihal's method) |
|
BS EN 10218-1:2012 (published 2012-01)
|
Steel wire and wire products. General Test methods |
|
BS EN 764-4:2014
|
PRESSURE EQUIPMENT - PART 4: ESTABLISHMENT OF TECHNICAL DELIVERY CONDITIONS FOR METALLIC MATERIALS |
|
BS EN 10083-1:2006
|
STEELS FOR QUENCHING AND TEMPERING - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS |
|
BS EN 818-2 : 1997
|
SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 2: MEDIUM TOLERANCE CHAIN FOR CHAIN SLINGS - GRADE 8 |
|
BS EN ISO 683-17:2014 (published 2014-11)
|
Heat-treated steels, alloy steels and free-cutting steels Ball and roller bearing steels |
|
BS EN 1677-5 : 2001
|
COMPONENTS FOR SLINGS - SAFETY - PART 5: FORGED STEEL LIFTING HOOKS WITH LATCH - GRADE 4 |
|
ISO 683-17:2014
|
Heat-treated steels, alloy steels and free-cutting steels Part 17: Ball and roller bearing steels |
|
BS EN 15049:2007 (published 2007-09)
|
Railway applications. Suspension components. Torsion bar, steel |
|
BS EN 1677-4 : 2000
|
COMPONENTS FOR SLINGS - SAFETY - PART 4: LINKS, GRADE 8 |
|
UNE-EN 10216-3:2014
|
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes |
|
BS EN 1442 : 2006
|
LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LPG - DESIGN AND CONSTRUCTION |
|
UNE-EN ISO 683-17:2015
|
Heat-treated steels, alloy steels and free-cutting steels - Part 17: Ball and roller bearing steels (ISO 683-17:2014) |
|
UNE-EN 10149-1:2014
|
Hot rolled flat products made of high yield strength steels for cold forming - Part 1: General technical delivery conditions |
|
BS EN 10028-7:2007
|
FLAT PRODUCTS MADE OF STEELS FOR PRESSURE PURPOSES - PART 7: STAINLESS STEELS |
|
BS EN 14330:2003
|
INLAND NAVIGATION VESSELS - STUDLESS ANCHOR CHAIN - ROUND STEEL LINK CHAIN |
|
UNE-EN 10216-5:2014
|
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes |
|
UNE-EN 10218-1:2012
|
Steel wire and wire products - General - Part 1: Test methods |
|
BS EN 10149-1 : 2013
|
HOT ROLLED FLAT PRODUCTS MADE OF HIGH YIELD STRENGTH STEELS FOR COLD FORMING - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS |
|
EN 1442:2017
|
LPG equipment and accessories - Transportable refillable welded steel cylinders for LPG - Design and construction |
|
EN 4800-003 : 2010
|
AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 003: TUBE |
|
EN 4721 : 2014
|
Aerospace series - Steel X4CrNiMo16-5-1 (1.4418) - Air melted and electroslag remelted (ESR) - Hardened and tempered - Bar - De ≤ 200 mm - 900 MPa ≤ Rm ≤ 1 050 MPa |
|
EN 4800-002 : 2010
|
AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 002: BAR AND SECTION |
|
EN ISO 683-17:2014
|
HEAT-TREATED STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 17: BALL AND ROLLER BEARING STEELS (ISO 683-17:2014) |
|
EN 1677-5:2001+A1:2008
|
Components for slings - Safety - Part 5: Forged steel lifting hooks with latch - Grade 4 |
|
EN 4800-001 : 2010
|
AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 001: PLATE, SHEET AND STRIP |
|
EN ISO 12732 : 2008
|
CORROSION OF METALS AND ALLOYS - ELECTROCHEMICAL POTENTIOKINETIC REACTIVATION MEASUREMENT USING THE DOUBLE LOOP METHOD (BASED ON CIHAL'S METHOD) |
|
EN 4631:2013
|
AEROSPACE SERIES - STEEL X4CRNIMO16-5-1 (1.4418) - AIR MELTED - HARDENED AND TEMPERED - BAR - D[E] <= 200 MM - 900 MPA <= R[M] <= 1050 MPA |
|
EN 15049:2007
|
Railway applications - Suspension components - Torsion bar, steel |
|
EN 1677-6:2001+A1:2008
|
Components for slings - Safety - Part 6: Links - Grade 4 |
|
EN 13889:2003+A1:2008
|
FORGED STEEL SHACKLES FOR GENERAL LIFTING PURPOSES - DEE SHACKLES AND BOW SHACKLES - GRADE 6 - SAFETY |
|
EN 4700-003 : 2010
|
AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 003: TUBE |
|
UNI EN 10277-1 : 2008
|
BRIGHT STEEL PRODUCTS - TECHNICAL DELIVERY CONDITIONS - PART 1: GENERAL |
|
EN 818-3:1999+A1:2008
|
SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 3: MEDIUM TOLERANCE CHAIN FOR CHAIN SLINGS - GRADE 4 |
|
EN 2030 : 2013
|
AEROSPACE SERIES - STEEL X105CRMO17 (1.3544) - HARDENED AND TEMPERED - BARS - D[E] <= 150 MM |
|
EN 818-7:2002+A1:2008
|
Short link chain for lifting purposes - Safety - Part 7: Fine tolerance hoist chain, Grade T (Types T, DAT and DT) |
|
EN 4500-004 : 2012
|
AEROSPACE SERIES - METALLIC MATERIALS - RULES FOR DRAFTING AND PRESENTATION OF MATERIAL STANDARDS - PART 004: SPECIFIC RULES FOR TITANIUM AND TITANIUM ALLOYS |
|
EN 4500-003 : 2012
|
AEROSPACE SERIES - METALLIC MATERIALS - RULES FOR DRAFTING AND PRESENTATION OF MATERIAL STANDARDS - PART 003: SPECIFIC RULES FOR HEAT RESISTING ALLOYS |
|
EN 818-2:1996+A1:2008
|
SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 2: MEDIUM TOLERANCE CHAIN FOR CHAIN SLINGS - GRADE 8 |
|
EN ISO 3266:2010/A1:2015
|
FORGED STEEL EYEBOLTS GRADE 4 FOR GENERAL LIFTING PURPOSES (ISO 3266:2010+A1:2015) |
|
EN 4629:2013
|
AEROSPACE SERIES - STEEL X4CRNIMO16-5-1 (1.4418) - AIR MELTED - SOFTENED - FORGING STOCK - D[E] <= 300 MM |
|
EN 4627:2014
|
AEROSPACE SERIES - STEEL X4CRNIMO16-5-1 (1.4418) - AIR MELTED - HARDENED AND TEMPERED - FORGINGS - D[E] <= 200 MM - 1150 MPA <= R[M] <= 1300 MPA |
|
EN 4800-004 : 2010
|
AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 004: WIRE |
|
EN 14140:2014/AC:2015
|
LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LPG - ALTERNATIVE DESIGN AND CONSTRUCTION |
|
EN 1677-4:2000+A1:2008
|
Components for slings - Safety - Part 4: Links, Grade 8 |
|
EN 4630:2014
|
AEROSPACE SERIES - STEEL X4CRNIMO16-5-1 (1.4418) - AIR MELTED - HARDENED AND TEMPERED - FORGINGS - D[E] <= 200 MM - 900 MPA <= R[M] <= 1050 MPA |
|
EN 15566:2016
|
Railway applications - Railway rolling stock - Draw gear and screw coupling |
|
EN 4800-006 : 2010
|
AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 006: PRE-PRODUCTION AND PRODUCTION FORGINGS |
|
EN 4800-005 : 2010
|
AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 005: FORGING STOCK |
|
EN 4700-004 : 2010
|
AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 004: WIRE |
|
EN 4700-001 : 2010
|
AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 001: PLATE, SHEET AND STRIP |
|
EN 1677-1:2000+A1:2008
|
COMPONENTS FOR SLINGS - SAFETY - PART 1: FORGED STEEL COMPONENTS, GRADE 8 |
|
EN 14330 : 2003
|
INLAND NAVIGATION VESSELS - STUDLESS ANCHOR CHAIN - ROUND STEEL LINK CHAIN |
|
EN 764-4:2014
|
Pressure equipment - Part 4: Establishment of technical delivery conditions for metallic materials |
|
BS EN 4700-001:2010
|
AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 001: PLATE, SHEET AND STRIP |
|
I.S. EN 4630:2014
|
AEROSPACE SERIES - STEEL X4CRNIMO16-5-1 (1.4418) - AIR MELTED - HARDENED AND TEMPERED - FORGINGS - D[E] <= 200 MM - 900 MPA <= R[M] <= 1050 MPA |
|
06/30099300 DC : DRAFT JUN 2006
|
BS ISO 5832-1 - IMPLANTS FOR SURGERY - METALLIC MATERIALS - PART 1: WROUGHT STAINLESS STEEL |
|
PREN 10263-1 : DRAFT 2014
|
STEEL ROD, BARS AND WIRE FOR COLD HEADING AND COLD EXTRUSION - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS |
|
02/704957 DC : DRAFT NOV 2002
|
ISO 683-14 - HEAT-TREATABLE STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 14: HOT-ROLLED STEELS FOR QUENCHED AND TEMPERED SPRINGS |
|
UNE-EN 15566:2017
|
Railway applications - Railway rolling stock - Draw gear and screw coupling |
|
14/30284697 DC : 0
|
BS ISO 683-5 - HEAT TREATABLE STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 5: NITRIDING STEELS |
|
17/30341500 DC : 0
|
BS EN ISO 5832-2 - IMPLANTS FOR SURGERY - METALLIC MATERIALS - PART 2: UNALLOYED TITANIUM |
|
14/30312170 DC : 0
|
BS EN 10028-3 - FLAT PRODUCTS MADE OF STEELS FOR PRESSURE PURPOSES - PART 3: WELDABLE FINE GRAIN STEELS, NORMALIZED |
|
EN ISO 11960:2014
|
PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR USE AS CASING OR TUBING FOR WELLS (ISO 11960:2014) |
|
11/30197571 DC : 0
|
BS ISO 25832-1 - IMPLANTS FOR SURGERY - SEAMLESS TUBES FOR SURGICAL IMPLANTS - PART 1: MATERIALS BASED ON IRON |
|
ISO 630-4:2012
|
Structural steels Part 4: Technical delivery conditions for high-yield-strength quenched and tempered structural steel plates |
|
17/30346759 DC : 0
|
BS ISO 9328-5 - STEEL FLAT PRODUCTS FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 5: WELDABLE FINE GRAIN STEELS, THERMOMECHANICALLY ROLLED |
|
I.S. EN 4700-003:2010
|
AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 003: TUBE |
|
08/30187558 DC : 0
|
BS EN 10028-3 - FLAT PRODUCTS MADE OF STEELS FOR PRESSURE PURPOSES - PART 3: WELDABLE FINE GRAIN STEELS, NORMALIZED |
|
04/30008013 DC : 0
|
BS ISO 3266 - EYEBOLTS GRADE 4 FOR GENERAL LIFTING PURPOSES |
|
ISO 683-14:2004
|
Heat-treatable steels, alloy steels and free-cutting steels Part 14: Hot-rolled steels for quenched and tempered springs |
|
11/30239485 DC : 0
|
BS EN 10025-5 - HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 5: TECHNICAL DELIVERY CONDITIONS FOR STRUCTURAL STEELS WITH IMPROVED ATMOSPHERIC CORROSION RESISTANCE |
|
I.S. EN 4800-003:2010
|
AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 003: TUBE |
|
15/30280630 DC : 0
|
BS EN ISO 4885 - FERROUS PRODUCTS - HEAT TREATMENTS - VOCABULARY |
|
DIN ISO 5832-14:2009-12
|
IMPLANTS FOR SURGERY - METALLIC MATERIALS - PART 14: WROUGHT TITANIUM 15-MOLYBDENUM 5-ZIRCONIUM 3-ALUMINIUM ALLOY |
|
06/30138405 DC : DRAFT JUN 2006
|
ISO 8539 - FORGED STEEL COMPONENTS FOR LIFTING SLINGS - GRADE 8 |
|
BS ISO 6336-5:2016
|
Calculation of load capacity of spur and helical gears Strength and quality of materials |
|
NFS 94 051 : 2000
|
IMPLANTS FOR SURGERY - METALLIC MATERIALS - WROUGHT STAINLESS STEEL |
|
BS EN 13001-3-5:2016
|
CRANES - GENERAL DESIGN - LIMIT STATES AND PROOF OF COMPETENCE OF FORGED HOOKS |
|
UNI EN 4629 : 2013
|
AEROSPACE SERIES - STEEL X4CRNIMO16-5-1 (1.4418) - AIR MELTED - SOFTENED - FORGING STOCK - D[E] <= 300 MM |
|
17/30330552 DC : 0
|
BS ISO 4954 - STEELS FOR COLD HEADING AND COLD EXTRUDING |
|
BS 7252-8:1990
|
METALLIC MATERIALS FOR SURGICAL IMPLANTS - SPECIFICATION FOR WROUGHT COBALT NICKEL CHROMIUM MOLYBDENUM TUNGSTEN IRON ALLOY |
|
BS ISO 5832-9:2007
|
IMPLANTS FOR SURGERY - METALLIC MATERIALS - PART 9: WROUGHT HIGH NITROGEN STAINLESS STEEL |
|
03/313799 DC : DRAFT AUG 2003
|
ISO 11960 - PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR USE AS CASING OR TUBING FOR WELLS |
|
BS EN ISO 12732:2008
|
CORROSION OF METALS AND ALLOYS - ELECTROCHEMICAL POTENTIOKINETIC REACTIVATION MEASUREMENT USING THE DOUBLE LOOP METHOD (BASED ON CIHAL'S METHOD) |
|
DIN EN 10025-5:2011-04 (Draft)
|
HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 5: TECHNICAL DELIVERY CONDITIONS FOR STRUCTURAL STEELS WITH IMPROVED ATMOSPHERIC CORROSION RESISTANCE |
|
05/30132598 DC : DRAFT APR 2005
|
EN 10083-2 - STEELS FOR QUENCHING AND TEMPERING - PART 2: TECHNICAL DELIVERY CONDITIONS FOR NON ALLOYS STEELS |
|
BS EN 4629:2013
|
AEROSPACE SERIES - STEEL X4CRNIMO16-5-1 (1.4418) - AIR MELTED - SOFTENED - FORGING STOCK - D[E] <= 300 MM |
|
03/314809 DC : DRAFT SEP 2003
|
EN ISO 13680 - PETROLEUM AND NATURAL GAS INDUSTRIES - CORROSION-RESISTANT ALLOY SEAMLESS TUBES FOR USE AS CASING, TUBING AND COUPLING STOCK - TECHNICAL DELIVERY CONDITIONS |
|
I.S. EN 4700-002:2016
|
AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 002: BAR AND SECTION |
|
ISO 630-3:2012
|
Structural steels Part 3: Technical delivery conditions for fine-grain structural steels |
|
PREN 10219-2 : DRAFT 2016
|
COLD FORMED WELDED STRUCTURAL STEEL HOLLOW SECTIONS - PART 2: TECHNICAL DELIVERY CONDITIONS |
|
CSA ISO 5832-5 : 0
|
IMPLANTS FOR SURGERY - METALLIC MATERIALS - PART 5: WROUGHT COBALT-CHROMIUM-TUNGSTEN-NICKEL ALLOY |
|
DIN EN ISO 12732:2008-07
|
CORROSION OF METALS AND ALLOYS - ELECTROCHEMICAL POTENTIOKINETIC REACTIVATION MEASUREMENT USING THE DOUBLE LOOP METHOD (BASED ON CIHAL'S METHOD) |
|
ISO 2604-1:1975
|
Steel products for pressure purposes Quality requirements Part 1: Forgings |
|
PREN 10025-1 : DRAFT 2011
|
HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS |
|
PREN 4700-002 : 200P3
|
AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 002: BAR AND SECTION |
|
PREN 4500-003 : 200P2
|
AEROSPACE SERIES - METALLIC MATERIALS - RULES FOR DRAFTING AND PRESENTATION OF MATERIAL STANDARDS - PART 003: SPECIFIC RULES FOR HEAT RESISTING SLLOYS |
|
UNI EN 4800-002 : 2011
|
AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 002: BAR AND SECTION |
|
ISO 9328-6:2018
|
Steel flat products for pressure purposes — Technical delivery conditions — Part 6: Weldable fine grain steels, quenched and tempered |
|
ISO 683-4:2016
|
Heat-treatable steels, alloy steels and free-cutting steels Part 4: Free-cutting steels |
|
I.S. EN 4800-001:2010
|
AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 001: PLATE, SHEET AND STRIP |
|
I.S. EN 10343:2009
|
STEELS FOR QUENCHING AND TEMPERING FOR CONSTRUCTION PURPOSES - TECHNICAL DELIVERY CONDITIONS |
|
BS EN 10263-1:2017
|
Steel rod, bars and wire for cold heading and cold extrusion General technical delivery conditions |
|
I.S. EN 4631:2013
|
AEROSPACE SERIES - STEEL X4CRNIMO16-5-1 (1.4418) - AIR MELTED - HARDENED AND TEMPERED - BAR - D[E] <= 200 MM - 900 MPA <= R[M] <= 1050 MPA |
|
DIN EN ISO 4885:2015-09 (Draft)
|
FERROUS MATERIALS - HEAT TREATMENTS - VOCABULARY (ISO 4885:2017) |
|
I.S. EN 4700-004:2010
|
AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 004: WIRE |
|
EN 10025-5 : 2004
|
HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 5: TECHNICAL DELIVERY CONDITIONS FOR STRUCTURAL STEELS WITH IMPROVED ATMOSPHERIC CORROSION RESISTANCE |
|
ISO 22034-1:2007
|
Steel wire and wire products — Part 1: General test methods |
|
BS EN ISO 4885:2017
|
FERROUS MATERIALS - HEAT TREATMENTS - VOCABULARY (ISO 4885:2017) |
|
17/30353548 DC : 0
|
BS EN 10277 - BRIGHT STEEL PRODUCTS - TECHNICAL DELIVERY CONDITIONS |
|
GOST R EN 818-2 : 2005
|
SHORT LINK STEEL CHAINS FOR LIFTING PURPOSES - SAFETY - PART 2: MEDIUM TOLERANCE STEEL CHAINS FOR GRADE 8 CHAIN SLINGS |
|
16/30332614 DC : 0
|
BS EN 10219-2 - COLD FORMED WELDED STRUCTURAL STEEL HOLLOW SECTIONS - PART 2: TECHNICAL DELIVERY CONDITIONS |
|
PREN 10149-1 : DRAFT 2011
|
HOT ROLLED FLAT PRODUCTS MADE OF HIGH YIELD STRENGTH STEELS FOR COLD FORMING - PART 1: GENERAL DELIVERY CONDITIONS |
|
CSA ISO 5832-6 : 0
|
IMPLANTS FOR SURGERY - METALLIC MATERIALS - PART 6: WROUGHT COBALT-NICKEL-CHROMIUM-MOLYBDENUM ALLOY |
|
ISO 9328-3:2018
|
Steel flat products for pressure purposes — Technical delivery conditions — Part 3: Weldable fine grain steels, normalized |
|
KTA 3201.3 : 2007(R2012)
|
COMPONENTS OF THE REACTOR COOLANT PRESSURE BOUNDARY OF LIGHT WATER REACTORS - PART 3: MANUFACTURE |
|
EN 10083-3:2006/AC:2008
|
STEELS FOR QUENCHING AND TEMPERING - PART 3: TECHNICAL DELIVERY CONDITIONS FOR ALLOY STEELS |
|
ISO 683-15:1992
|
Heat-treatable steels, alloy steels and free-cutting steels Part 15: Valve steels for internal combustion engines |
|
I.S. EN ISO 945-1:2018
|
MICROSTRUCTURE OF CAST IRONS - PART 1: GRAPHITE CLASSIFICATION BY VISUAL ANALYSIS (ISO 945-1:2017) |
|
I.S. EN 10083-3:2006
|
STEELS FOR QUENCHING AND TEMPERING - PART 3: TECHNICAL DELIVERY CONDITIONS FOR ALLOY STEELS |
|
DIN EN 764-4:2015-03
|
PRESSURE EQUIPMENT - PART 4: ESTABLISHMENT OF TECHNICAL DELIVERY CONDITIONS FOR METALLIC MATERIALS |
|
DIN EN 10025-1:2011-04 (Draft)
|
Hot rolled products of structural steels - Part 1: General technical delivery conditions; German version prEN 10025-1:2011 |
|
DIN EN 14330 E : 2004
|
INLAND NAVIGATION VESSELS - STUDLESS ANCHOR CHAIN - ROUND STEEL LINK CHAIN |
|
DIN EN 10083-1 E : 2006
|
STEELS FOR QUENCHING AND TEMPERING - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS |
|
UNE-EN 10028-3:2017
|
Flat products made of steels for pressure purposes - Part 3: Weldable fine grain steels, normalized |
|
BS EN 10210-1:2006
|
HOT FINISHED STRUCTURAL HOLLOW SECTIONS OF NON-ALLOY AND FINE GRAIN STEELS - PART 1: TECHNICAL DELIVERY CONDITIONS |
|
BS EN 10219-1:2006
|
Cold formed welded structural hollow sections of non-alloy and fine grain steels Technical delivery requirements |
|
BS EN 1677-6 : 2001
|
COMPONENTS FOR SLINGS - SAFETY - PART 6: LINKS - GRADE 4 |
|
BS EN 10277-1:2008
|
BRIGHT STEEL PRODUCTS - TECHNICAL DELIVERY CONDITIONS - PART 1: GENERAL |
|
EN 10084:2008
|
Case hardening steels - Technical delivery conditions |
|
EN 10343:2009
|
Steels for quenching and tempering for construction purposes - Technical delivery conditions |
|
BS 7252-7:1994
|
METALLIC MATERIALS FOR SURGICAL IMPLANTS - SPECIFICATION FOR COBALT-CHROMIUM-NICKEL-MOLYBDENUM-IRON ALLOY |
|
DIN EN 10219-1:2006-07
|
Cold formed welded structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery conditions |
|
EN 10216-3:2013
|
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes |
|
DIN EN ISO 945-1:2010-09
|
MICROSTRUCTURE OF CAST IRONS - PART 1: GRAPHITE CLASSIFICATION BY VISUAL ANALYSIS |
|
DIN EN 14140:2017-01
|
LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LPG - ALTERNATIVE DESIGN AND CONSTRUCTION |