ISO 6508-1:2016
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Metallic materials — Rockwell hardness test — Part 1: Test method
Available format(s)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
Superseded date
13-12-2023
Language(s)
French, English
Published date
08-08-2016
ISO 6508-1:2016 specifies the method for Rockwell regular and Rockwell superficial hardness tests for scales A, B, C, D, E, F, G, H, K, 15N, 30N, 45N, 15T, 30T, and 45T for metallic materials and is applicable to stationary and portable hardness testing machines.
For specific materials and/or products, other specific International Standards apply (for instance, ISO 3738‑1 and ISO 4498).
| Committee |
ISO/TC 164/SC 3
|
| DevelopmentNote |
Supersedes ISO 6508 and ISO 1024 (04/2001) Supersedes ISO/DIS 6508-1. (08/2016)
|
| DocumentType |
Standard
|
| Pages |
33
|
| PublisherName |
International Organization for Standardization
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes | |
| UnderRevision |
| Standards | Relationship |
| NF EN ISO 6508-1 : 2016 | Identical |
| NBN EN ISO 6508-1 : 2016 | Identical |
| NEN EN ISO 6508-1 : 2016 | Identical |
| NS EN ISO 6508-1 : 2016 | Identical |
| I.S. EN ISO 6508-1:2016 | Identical |
| PN EN ISO 6508-1 : 2016 | Identical |
| SN EN ISO 6508-1 : 2016 | Identical |
| UNI EN ISO 6508-1 : 2006 | Identical |
| SS-EN ISO 6508-1:2016 | Identical |
| UNI EN ISO 6508-1:2016 | Identical |
| UNE-EN ISO 6508-1:2017 | Identical |
| BS EN ISO 6508-1:2015 | Identical |
| EN ISO 6508-1:2016 | Identical |
| DIN EN ISO 6508-1:2016-12 | Identical |
| DIN EN ISO 6508-1:2015-06 | Identical |
| DS EN ISO 6508-1 : 2016 | Identical |
| BS EN ISO 6508-1:2016 | Identical |
| BIS IS 1586-1 : 2012 | Identical |
| SANS 6508-1 : 2ED 2009 | Identical |
| I.S. EN ISO 15630-3:2010 | STEEL FOR THE REINFORCEMENT AND PRESTRESSING OF CONCRETE - TEST METHODS - PART 3: PRESTRESSING STEEL |
| DIN EN ISO 15156-3:2015-12 | PETROLEUM AND NATURAL GAS INDUSTRIES - MATERIALS FOR USE IN H[2]S-CONTAINING ENVIRONMENTS IN OIL AND GAS PRODUCTION - PART 3: CRACKING-RESISTANT CRAS (CORROSION-RESISTANT ALLOYS) AND OTHER ALLOYS (ISO 15156-3:2015) |
| BS EN 4700-001:2010 | Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification Plate, sheet and strip |
| 17/30352150 DC : 0 | BS ISO 6787 - ASSEMBLY TOOLS FOR SCREWS AND NUTS - ADJUSTABLE WRENCHES |
| 07/30172770 DC : 0 | BS ISO 10428 - PETROLEUM AND NATURAL GAS INDUSTRIES DOWNHOLE EQUIPMENT - DOWNHOLE EQUIPMENT - SUCKER RODS, COUPLINGS AND ANCILLARY EQUIPMENT |
| UNE-EN ISO 12670:2016 | Thermal spraying - Components with thermally sprayed coatings - Technical supply conditions (ISO 12670:2011) |
| 10/30196141 DC : 0 | BS ISO 11119-3 - GAS CYLINDERS OF COMPOSITE CONSTRUCTION - SPECIFICATION AND TEST METHODS - PART 3: FULLY WRAPPED FIBRE REINFORCED COMPOSITE GAS CYLINDERS AND TUBES WITH NON-METALLIC AND NON-LOAD SHARING METAL LINERS |
| ISO 5743:2004 | Pliers and nippers General technical requirements |
| BS ISO 9656:2004 | Pliers and nippers for electronics. Test methods |
| 02/704957 DC : DRAFT NOV 2002 | ISO 683-14 - HEAT-TREATABLE STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 14: HOT-ROLLED STEELS FOR QUENCHED AND TEMPERED SPRINGS |
| 12/30257301 DC : 0 | BS EN ISO 20957-1 - STATIONARY TRAINING EQUIPMENT - PART 1: GENERAL SAFETY REQUIREMENTS AND TEST METHODS |
| ISO 11749:2014 | Belt drive — V-ribbed belts for the automotive industry — Fatigue test |
| 11/30196123 DC : DRAFT MAY 2011 | BS ISO 11119-2 - GAS CYLINDERS OF COMPOSITE CONSTRUCTION - SPECIFICATION AND TEST METHODS - PART 2: FULLY WRAPPED FIBRE REINFORCED COMPOSITE GAS CYLINDERS WITH LOAD-SHARING METAL LINERS |
| BS ISO 289-1:2015 | Rubber, unvulcanized. Determinations using a shearing-disc viscometer Determination of Mooney viscosity |
| ISO 404:2013 | Steel and steel products — General technical delivery requirements |
| 14/30261090 DC : 0 | BS EN ISO 17937 - DENTISTRY - OSTEOTOME FOR BONE COMPACTION AND SINUS FLOOR ELEVATION |
| ISO 11949:2016 | Cold-reduced tinmill products Electrolytic tinplate |
| UNE-EN ISO 5182:2017 | Resistance welding - Materials for electrodes and ancillary equipment (ISO 5182:2016) |
| 17/30357660 DC : DRAFT AUG 2017 | BS ISO 4960 - STEEL STRIP, COLD-REDUCED WITH A MASS FRACTION OF CARBON OVER 0,25% |
| API 11D3 :2008 | PROGRESSING CAVITY PUMP SYSTEMS FOR ARTIFICIAL LIFT - SURFACE-DRIVE SYSTEMS |
| 06/30148182 DC : DRAFT MAY 2006 | ISO 7866 - GAS CYLINDERS REFILLABLE SEAMLESS ALUMINIUM ALLOY GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING |
| UNI EN ISO 12690 : 2011 | METALLIC AND OTHER INORGANIC COATINGS - THERMAL SPRAY COORDINATION - TASKS AND RESPONSIBILITIES |
| 13/30290101 DC : 0 | BS EN 4700-2 - AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 002: BAR AND SECTION |
| 17/30312468 DC : 0 | BS ISO 15461 - STEEL FORGINGS - TESTING FREQUENCY, SAMPLING CONDITIONS AND TEST METHODS FOR MECHANICAL TESTS |
| 17/30337413 DC : 0 | BS EN ISO 4957 - TOOL STEELS |
| I.S. EN ISO 898-2:2012 | MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 2: NUTS WITH SPECIFIED PROPERTY CLASSES - COARSE THREAD AND FINE PITCH THREAD (ISO 898-2:2012) |
| BS ISO 9448-10:2013 | Tools for pressing. Guide bushes Form E, gliding bushes, flanged, type 2 |
| BS EN ISO 14998:2013 | Petroleum and natural gas industries. Downhole equipment. Completion accessories |
| API 5DP CHINESE : 2009 | SPECIFICATION FOR DRILL PIPE |
| BS ISO 7689:2008 | Aerospace. Bolts, with MJ threads, made of alloy steel, strength class 1100 MPa. Procurement specification |
| 17/30303088 DC : 0 | BS EN ISO 7492 - DENTISTRY - DENTAL EXPLORER |
| 16/30327501 DC : 0 | BS ISO 1711-2 - ASSEMBLY TOOLS FOR SCREWS AND NUTS - TECHNICAL SPECIFICATIONS - PART 2: MACHINE-OPERATED SOCKETS (IMPACT) |
| API SPEC 11B CHINESE : 2010 | SPECIFICATION FOR SUCKER RODS, POLISHED RODS AND LINERS, COUPLINGS, SINKER BARS, POLISHED ROD CLAMPS, STUFFING BOXES, AND PUMPING TEES |
| 07/30144587 DC : 0 | BS ISO 6932 - COLD-REDUCED CARBON STEEL STRIP WITH A MAXIMUM CARBON CONTENT OF 0,25% |
| UNI EN 4700-006 : 2011 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 006: PRE-PRODUCTION AND PRODUCTION FORGINGS |
| BS EN ISO 18556:2016 | Dentistry. Intraoral spatulas |
| 13/30247437 DC : 0 | BS EN ISO 683-17 - HEAT-TREATED STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 17: BALL AND ROLLER BEARING STEELS (ISO/DIS 683-17:2013) |
| BS ISO 9448-2:2013 | Tools for pressing. Guide bushes Form A, gliding bushes, plain, type 1 |
| 15/30323936 DC : 0 | BS EN 3833 - AEROSPACE SERIES - BOLTS, MJ THREADS, IN HEAT RESISTING NICKEL BASE ALLOY NI-PH2601 (INCONEL 718), PASSIVATED - CLASSIFICATION: 1550 MPA (AT AMBIENT TEMPERATURE)/650 DEGREES C - TECHNICAL SPECIFICATION |
| 13/30255310 DC : 0 | BS EN 1426 - BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF NEEDLE PENETRATION |
| 17/30315891 DC : 0 | BS ISO 19690-2 - DISC SPRINGS - PART 2: TECHNICAL SPECIFICATIONS |
| 16/30297742 DC : DRAFT JUNE 2016 | BS EN ISO 19490 - DENTISTRY - SINUS MEMBRANE ELEVATOR |
| 10/30197302 DC : 0 | BS ISO 22068 - SINTERED-METAL INJECTION-MOULDED MATERIALS - SPECIFICATIONS |
| DIN 6773:2001-04 | HEAT TREATMENT OF FERROUS METALS - HEAT TREATED PARTS, PRESENTATION AND INDICATIONS ON DRAWINGS |
| 04/30074927 DC : DRAFT JUN 2004 | EN ISO 6508-2 - METALLIC MATERIALS - ROCKWELL HARDNESS TEST - PART 2: VERIFICATION AND CALIBRATION OF TESTING MACHINES (SCALES A, B, C, D, E, F, G, H, K, N, T) |
| DIN EN ISO 26443 E : 2016 | FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - ROCKWELL INDENTATION TEST FOR EVALUATION OF ADHESION OF CERAMIC COATINGS (ISO 26443:2008) |
| UNE-EN ISO 19490:2018 | Dentistry - Sinus membrane elevator (ISO 19490:2017) |
| 13/30264474 DC : 0 | BS ISO 17541 - PLASTICS - QUANTITATIVE EVALUATION OF SCRATCH-INDUCED DAMAGE AND SCRATCH VISIBILITY |
| 17/30323197 DC : 0 | BS EN ISO 20570 - DENTISTRY - ORAL SURGICAL SCALPEL HANDLE |
| BS ISO 26443 : 2008 | FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - ROCKWELL INDENTATION TEST FOR EVALUATION OF ADHESION OF CERAMIC COATINGS |
| EN 1627:2011 | Pedestrian doorsets, windows, curtain walling, grilles and shutters - Burglar resistance - Requirements and classification |
| 12/30258463 DC : 0 | BS EN 16451 - RAILWAY APPLICATIONS - BRAKING - BRAKE PAD HOLDER |
| BS EN ISO 12670:2015 | Thermal spraying. Components with thermally sprayed coatings. Technical supply conditions |
| BS ISO 9182-4:2013 | Tools for pressing. Guide pillars Type C, pillars with taper lead and bush |
| BS EN 4700-005:2010 | Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification Forging stock |
| ISO 5287:2003 | Belt drives Narrow V-belts for the automotive industry Fatigue test |
| BS EN ISO 9809-2:2010 | Gas cylinders. Refillable seamless steel gas cylinders. Design, construction and testing Quenched and tempered steel cylinders with tensile strength greater than or equal to 1100 MPa |
| 15/30314608 DC : 0 | BS EN ISO 7153-1 - SURGICAL INSTRUMENTS - MATERIALS - PART 1: METALS |
| 16/30302541 DC : 0 | BS EN ISO 19715 - DENTISTRY - FILLING INSTRUMENTS WITH CONTRA SET |
| BS ISO 4254-13:2012 | Agricultural machinery. Safety Large rotary mowers |
| 15/30297745 DC : 0 | BS EN ISO 9173-1 - DENTISTRY - EXTRACTION FORCEPS - PART 1: GENERAL REQUIREMENTS |
| 12/30258615 DC : 0 | BS ISO 10384 - HOT-ROLLED CARBON STEEL SHEET AS DEFINED BY CHEMICAL COMPOSITION |
| BS ISO 20957-1:2005 | Stationary training equipment General safety requirements and test methods |
| 14/30275471 DC : 0 | BS ISO 18137-1 - LEAF SPRINGS - PART 1: TECHNICAL REQUIREMENTS AND TEST METHODS |
| 17/30361645 DC : DRAFT SEP 2017 | BS EN ISO 11961 - PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL DRILL PIPE |
| BS ISO 11119-4:2016 | Gas cylinders. Refillable composite gas cylinders. Design, construction and testing Fully wrapped fibre reinforced composite gas cylinders up to 150 l with load-sharing welded metallic liners |
| BS EN ISO 7866:2012 | Gas cylinders. Refillable seamless aluminium alloy gas cylinders. Design, construction and testing |
| ISO 16468:2015 | Investment castings (steel, nickel alloys and cobalt alloys) General technical requirements |
| 06/30148179 DC : DRAFT SEP 2006 | ISO 9809-3 - GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 3: NORMALIZED STEEL CYLINDERS |
| 12/30251283 DC : 0 | BS ISO 9809-4 - GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 4: STAINLESS STEEL CYLINDERS WITH AN R[M] VALUE OF LESS THAN 1100 MPA |
| BS EN ISO 3266 : 2010 | FORGED STEEL EYEBOLTS GRADE 4 FOR GENERAL LIFTING PURPOSES (ISO 3266:2010+A1:2015) |
| 06/30159843 DC : 0 | BS ISO 13680 - PETROLEUM AND NATURAL GAS INDUSTRIES - CORROSION - RESISTANT ALLOY SEAMLESS TUBES FOR USE AS CASING, TUBING AND COUPLING STOCK - TECHNICAL DELIVERY CONDITIONS |
| 05/30128668 DC : DRAFT FEB 2005 | ISO 7689 - AEROSPACE - BOLTS, WITH MJ THREADS, MADE OF ALLOY STEEL, STRENGTH CLASS 1100 MPA - PROCUREMENT |
| API 11D3 : 2008 : R2015 | PROGRESSING CAVITY PUMP SYSTEMS FOR ARTIFICIAL LIFT - SURFACE-DRIVE SYSTEMS |
| PREN 2576 : 200P2 | AEROSPACE SERIES - BOLTS, MJ THREADS, IN HEAT RESISTING STEEL FE-PA2601 (A286) - CLASSIFICATION: 900 MPA (AT AMBIENT TEMPERATURE)/650 DEGREES C - TECHNICAL SPECIFICATION |
| BS ISO 13628-10 : 2005 AMD 16775 | PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 10: SPECIFICATION FOR BONDED FLEXIBLE PIPE |
| 06/30148176 DC : DRAFT SEP 2006 | ISO 9809-2 - GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 2: QUENCHED AND TEMPERED STEEL CYLINDERS WITH TENSILE STRENGTH GREATER THAN OR EQUAL TO 1100 MPA |
| ABMA 10A : 2001 : R2008 | METAL BALLS FOR UNGROUND BEARINGS AND OTHER USES |
| 08/30190263 DC : DRAFT SEP 2008 | BS EN ISO 11960 - PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR USE AS CASING OR TUBING FOR WELLS |
| PREN 3302 : 200P2 | AEROSPACE SERIES - BOLTS IN HEAT RESISTING STEEL FE-PM1708 (FV535) - CLASSIFICATION: 1000 MPA/550 DEGREES C - TECHNICAL SPECIFICATION |
| I.S. EN ISO 17945:2015 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - METALLIC MATERIALS RESISTANT TO SULFIDE STRESS CRACKING IN CORROSIVE PETROLEUM REFINING ENVIRONMENTS (ISO 17945:2015) |
| BIS IS 1586-3 : 2012 | METALLIC MATERIALS - ROCKWELL HARDNESS TEST - PART 3: CALIBRATION OF REFERENCE BLOCKS (SCALES, A, B, C, D, E, F, G, H, K, N, T) |
| PREN 4359 : 200P1 | AEROSPACE SERIES - SIX LOBE RECESS - DRIVERS - TECHNICAL SPECIFICATION |
| I.S. EN 16281:2013 | CHILD PROTECTIVE PRODUCTS - CONSUMER FITTED CHILD RESISTANT LOCKING DEVICES FOR WINDOWS AND BALCONY DOORS - SAFETY REQUIREMENTS AND TEST METHODS |
| ISO 683-1:2016 | Heat-treatable steels, alloy steels and free-cutting steels Part 1: Non-alloy steels for quenching and tempering |
| API SPEC 17J : 2014 | SPECIFICATION FOR UNBONDED FLEXIBLE PIPE |
| ISO 9448-9:2013 | Tools for pressing — Guide bushes — Part 9: Form B, ball cage bushes, plain, type 2 |
| ISO 10303-214:2010 | Industrial automation systems and integration Product data representation and exchange Part 214: Application protocol: Core data for automotive mechanical design processes |
| ISO 12753-2:1999 | Compasses Part 2: Requirements, designation and marking |
| I.S. EN ISO 9809-2:2010 | GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 2: QUENCHED AND TEMPERED STEEL CYLINDERS WITH TENSILE STRENGTH GREATER THAN OR EQUAL TO 1100 MPA |
| ISO 9873:2017 | Dentistry Intra-oral mirrors |
| ISO 11951:2016 | Cold-reduced tinmill products Blackplate |
| I.S. EN ISO 17078-4:2010 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 4: PRACTICES FOR SIDE-POCKET MANDRELS AND RELATED EQUIPMENT |
| I.S. EN ISO 18556:2016 | DENTISTRY - INTRAORAL SPATULAS (ISO 18556:2016) |
| ONORM EN 3685 : 2008 | AEROSPACE SERIES - BOLTS IN HEAT RESISTING STEEL FE-PA2601 (A286) - CLASSIFICATION: 1100 MPA/650 DEGREES C - TECHNICAL SPECIFICATION |
| ISO 22034-1:2007 | Steel wire and wire products — Part 1: General test methods |
| UNE-EN ISO 16635-2:2015 | Dentistry - Dental rubber dam instruments - Part 2: Clamp forceps(ISO 16635-2:2014) |
| 17/30359541 DC : 0 | BS EN 12797 - BRAZING - DESTRUCTIVE TESTS OF BRAZED JOINTS |
| ISO 8642:2008 | Aerospace — Self-locking nuts with maximum operating temperature greater than 425 degrees C — Test methods |
| BS 2000-49(2007) : 2007 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF NEEDLE PENETRATION |
| UNI EN 14399-9 : 2009 | HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 9: SYSTEM HR OR HV - DIRECT TENSION INDICATORS FOR BOLT AND NUT ASSEMBLIES |
| I.S. EN 4700-007:2010 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 007: REMELTING STOCK |
| NF EN ISO 15630-3 : 2010 | STEEL FOR THE REINFORCEMENT AND PRESTRESSING OF CONCRETE - TEST METHODS - PART 3: PRESTRESSING STEELS |
| NF EN 3389 : 2009 | AEROSPACE SERIES - FASTENERS, EXTERNALLY THREADED, IN HEAT RESISTING NICKEL BASE ALLOY NI-PH1302 (WASPALOY) - CLASSIFICATION: 1210 MPA/730 DEGREES C - MANUFACTURING METHOD OPTIONAL - TECHNICAL SPECIFICATION |
| NF EN ISO 3266 : 2010 AMD 1 2016 | FORGED STEEL EYEBOLTS GRADE 4 FOR GENERAL LIFTING PURPOSES |
| UNI EN ISO 11960 : 2014 | PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR USE AS CASING OR TUBING FOR WELLS |
| ISO 5857:2008 | Aerospace Bolts, with MJ threads, made of alloy steel, strength class 1 250 MPa Procurement specification |
| NF EN 3299 : A2007 | AEROSPACE SERIES - SHAFT-NUTS AND THREADED RINGS, SELF-LOCKING, RIGHT- OR LEFT-HAND MJ THREADS, IN HEAT RESISTING STEEL FE-PA2601 (A286), SILVER PLATED - TECHNICAL SPECIFICATION |
| API 14L CHINESE : 2007 | SPECIFICATION FOR LOCK MANDRELS AND LANDING NIPPLES |
| ONORM EN 12504-2 : 2013 | TESTING CONCRETE IN STRUCTURES - PART 2: NON-DESTRUCTIVE TESTING - DETERMINATION OF REBOUND NUMBER |
| DIN EN ISO 15156-2:2015-12 | PETROLEUM AND NATURAL GAS INDUSTRIES - MATERIALS FOR USE IN H[2]S-CONTAINING ENVIRONMENTS IN OIL AND GAS PRODUCTION - PART 2: CRACKING-RESISTANT CARBON AND LOW-ALLOY STEELS, AND THE USE OF CAST IRONS (ISO 15156-2:2015) |
| DIN EN ISO 6508-2:2015-06 | Metallic materials - Rockwell hardness test - Part 2: Verification and calibration of testing machines and indenters (ISO 6508-2:2015); German version EN ISO 6508-2:2015 |
| DIN EN 10208-1:2009-07 | STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 1: PIPES OF REQUIREMENT CLASS A |
| DIN EN ISO 6508-3:2015-06 | Metallic materials - Rockwell hardness test - Part 3: Calibration of reference blocks (ISO 6508-3:2015) |
| BS EN ISO 14310:2008 | Petroleum and natural gas industries. Downhole equipment. Packers and bridge plugs |
| BS EN ISO 13628-2:2006 | Petroleum and natural gas industries. Design and operation of subsea production systems Unbonded flexible pipe systems for subsea and marine applications |
| UNE-EN ISO 898-1:2015 | Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs with specified property classes - Coarse thread and fine pitch thread (ISO 898-1:2013) |
| BS EN 3302:2017 | Aerospace series. Bolts in heat resisting steel FE-PM1708 (FV535). Classification: 1 000 MPa/550 °C. Technical specification |
| BS EN 12504-2:2012 | Testing concrete in structures Non-destructive testing. Determination of rebound number |
| UNE-EN 12504-2:2013 | Testing concrete in structures - Part 2: Non-destructive testing - Determination of rebound number |
| BS EN 10089:2002 | Hot rolled steels for quenched and tempered springs. Technical delivery conditions |
| BS EN ISO 7153-1:2016 | Surgical instruments. Materials Metals |
| BS EN ISO 11960:2014 | Petroleum and natural gas industries. Steel pipes for use as casing or tubing for wells |
| BS EN 10205:2016 | Cold reduced tinmill products. Blackplate |
| UNE-EN 12513:2011 | Founding - Abrasion resistant cast irons |
| BS EN ISO 3506-3:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners Set screws and similar fasteners not under tensile stress |
| ISO 3506-2:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners Part 2: Nuts |
| BS EN 14616:2004 | Thermal spraying. Recommendations for thermal spraying |
| BS EN 893:2010 | Mountaineering equipment. Crampons. Safety requirements and test methods |
| BS EN 14566 : 2008 | MECHANICAL FASTENERS FOR GYPSUM PLASTERBOARD SYSTEMS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| BS EN 14772:2005 | Flanges and their joints. Quality assurance inspection and testing of gaskets in accordance with the series of standards EN 1514 and EN 12560 |
| I.S. EN 10084:2008 | CASE HARDENING STEELS - TECHNICAL DELIVERY CONDITIONS |
| I.S. EN 10218-1:2012 | STEEL WIRE AND WIRE PRODUCTS - GENERAL - PART 1: TEST METHODS |
| EN 10297-1:2003 | Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 1: Non-alloy and alloy steel tubes |
| EN 10263-1:2017 | Steel rod, bars and wire for cold heading and cold extrusion - Part 1: General technical delivery conditions |
| EN 10088-2:2014 | STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
| CEN/TS 1071-8 : 2004 | ADVANCED TECHNICAL CERAMICS - METHODS OF TEST FOR CERAMIC COATINGS - PART 8: ROCKWELL INDENTATION TEST FOR EVALUATION OF ADHESION |
| EN 12080:2017 | Railway applications - Axleboxes - Rolling bearings |
| EN 892:2012+A1:2016 | Mountaineering equipment - Dynamic mountaineering ropes - Safety requirements and test methods |
| EN ISO 6508-2:2015 | Metallic materials - Rockwell hardness test - Part 2: Verification and calibration of testing machines and indenters (ISO 6508-2:2015) |
| DIN EN 10218-1:2012-03 | STEEL WIRE AND WIRE PRODUCTS - GENERAL - PART 1: TEST METHODS |
| EN 10088-4:2009 | Stainless steels - Part 4: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes |
| DIN EN 14616:2005-02 | THERMAL SPRAYING - RECOMMENDATIONS FOR THERMAL SPRAYING |
| DIN ISO 10071-2:2006-03 | TOOLS FOR PRESSING - BALL-LOCK PUNCHES - PART 2: BALL-LOCK PUNCHES FOR HEAVY DUTY |
| EN 10208-1:2009 | Steel pipes for pipelines for combustible fluids - Technical delivery condi-tions - Part 1: Pipes of requirement class A |
| DIN EN 657:2005-06 | THERMAL SPRAYING - TERMINOLOGY, CLASSIFICATION |
| DIN ISO 12844:2006-11 | Raw optical glass - Grindability with diamond pellets - Test method and classification (ISO 12844:1999) |
| DIN ISO 4498:2005-11 | SINTERED METAL MATERIALS, EXCLUDING HARDMETALS - DETERMINATION OF APPARENT HARDNESS AND MICROHARDNESS |
| DIN EN 10205:2017-03 | COLD REDUCED TINMILL PRODUCTS - BLACKPLATE |
| EN 62271-202:2014/AC:2014 | HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 202: HIGH-VOLTAGE/LOW-VOLTAGE PREFABRICATED SUBSTATION (IEC 62271-202:2014) |
| EN 10205:2016 | Cold reduced tinmill products - Blackplate |
| EN 10218-1:2012 | Steel wire and wire products - General - Part 1: Test methods |
| EN 12513:2011 | Founding - Abrasion resistant cast irons |
| EN ISO 6508-3:2015 | Metallic materials - Rockwell hardness test - Part 3: Calibration of reference blocks (ISO 6508-3:2015) |
| EN ISO 26443:2016 | Fine ceramics (advanced ceramics, advanced technical ceramics) - Rockwell indentation test for evaluation of adhesion of ceramic coatings (ISO 26443:2008) |
| EN 10083-2:2006 | Steels for quenching and tempering - Part 2: Technical delivery conditions for non alloy steels |
| ONORM EN ISO 898-2 : 2012 | MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 2: NUTS WITH SPECIFIED PROPERTY CLASSES - COARSE THREAD AND FINE PITCH THREAD (ISO 898-2:2012) |
| ISO 11950:2016 | Cold-reduced tinmill products Electrolytic chromium/chromium oxide-coated steel |
| UNI EN ISO 16635-2 : 2014 | DENTISTRY - DENTAL RUBBER DAM INSTRUMENTS - PART 2: CLAMP FORCEPS |
| BS EN ISO 16635-2:2014 | Dentistry. Dental rubber dam instruments Clamp forceps |
| 05/30136295 DC : DRAFT JUL 2005 | ISO 4875-2 - METAL-CUTTING BAND SAW BLADES - PART 2: CHARACTERISTICS AND DIMENSIONS |
| UNI CEN/TS 16700 : 2014 | PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD - ASSESSMENT OF RESISTANCE TO IMPACT OF A COATING ON A WOODEN SUBSTRATE |
| S.R. CEN/TS 16700:2014 | PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD - ASSESSMENT OF RESISTANCE TO IMPACT OF A COATING ON A WOODEN SUBSTRATE |
| BS EN 1627:2011 | Pedestrian doorsets, windows, curtain walling, grilles and shutters. Burglar resistance. Requirements and classification |
| 12/30245297 DC : 0 | BS EN ISO 16635-2 - DENTISTRY - RUBBER DAM TECHNIQUE - PART 2: RUBBER DAM CLAMP FORCEPS |
| DIN EN ISO 16635-1 E : 2014 | DENTISTRY - DENTAL RUBBER DAM TECHNIQUE - PART 1: HOLE PUNCH (ISO 16635-1:2013) |
| API SPEC 11D1 : 2015 | PACKERS AND BRIDGE PLUGS |
| ISO 898-3:2018 | Mechanical properties of fasteners made of carbon steel and alloy steel — Part 3: Flat washers with specified property classes |
| BS EN ISO 9809-1:2010 | Gas cylinders. Refillable seamless steel gas cylinders. Design, construction and testing Quenched and tempered steel cylinders with tensile strength less than 1100 MPa |
| DIN EN ISO 18556 E : 2016 | DENTISTRY - INTRAORAL SPATULAS (ISO 18556:2016) |
| 11/30230618 DC : 0 | BS ISO 683-2 - HEAT-TREATABLE STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 2: ALLOY STEELS FOR QUENCHING AND TEMPERING |
| BS EN 4700-006:2010 | Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification Pre-production and production forgings |
| BS ISO 9448-4:2013 | Tools for pressing. Guide bushes Form C, gliding bushes, headed, type 1 |
| I.S. EN ISO 9809-1:2010 | GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 1: QUENCHED AND TEMPERED STEEL CYLINDERS WITH TENSILE STRENGTH LESS THAN 1100 MPA |
| ISO 17918:2015 | Corrosion of metals and alloys Evaluation of selective corrosion of Cu alloys and grey cast iron for power plant components by visual inspection and hardness measurement |
| I.S. EN 657:2005 | THERMAL SPRAYING - TERMINOLOGY, CLASSIFICATION |
| DIN EN ISO 22068 E : 2014 | SINTERED-METAL INJECTION-MOULDED MATERIALS - SPECIFICATIONS (ISO 22068:2012) |
| I.S. EN 10208-2:2009 | STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 2: PIPES OF REQUIREMENT CLASS B |
| DIN EN ISO 3266:2016-05 | FORGED STEEL EYEBOLTS GRADE 4 FOR GENERAL LIFTING PURPOSES (ISO 3266:2010 + AMD 1:2015) |
| UNI EN ISO 9809-3 : 2010 | GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 3: NORMALIZED STEEL CYLINDERS |
| 13/30274822 DC : 0 | BS ISO 11119-4 - GAS CYLINDERS - REFILLABLE COMPOSITE GAS CYLINDERS AND TUBES - DESIGN, CONSTRUCTION AND TESTING - PART 4: FULLY WRAPPED FIBRE REINFORCED COMPOSITE GAS CYLINDERS AND TUBES UP TO 450 L WITH LOAD-SHARING WELDED METALLIC LINERS |
| 15/30303331 DC : 0 | BS EN ISO 12156-1 - DIESEL FUEL - ASSESSMENT OF LUBRICITY USING THE HIGH-FREQUENCY RECIPROCATING RIG (HFRR) - PART 1: TEST METHOD |
| 14/30248087 DC : 0 | BS ISO 11950 - COLD-REDUCED ELECTROLYTIC CHROMIUM/CHROMIUM OXIDE-COATED STEEL |
| 15/30278527 DC : 0 | BS EN ISO 18559 - DENTISTRY - EXTRAORAL SPATULAS FOR MIXING DENTAL CEMENTS |
| API 64 : 2017-08 | DIVERTER EQUIPMENT SYSTEMS |
| BS EN ISO 20957-1:2013 | Stationary training equipment General safety requirements and test methods |
| DIN EN 16451:2015-09 | RAILWAY APPLICATIONS - BRAKING - BRAKE PAD HOLDER |
| 13/30260404 DC : 0 | BS ISO 1711-2 - ASSEMBLY TOOLS FOR SCREWS AND NUTS - TECHNICAL SPECIFICATIONS - PART 2: MACHINE-OPERATED SOCKETS (IMPACT) |
| I.S. EN 15311:2007 | THERMAL SPRAYING - COMPONENTS WITH THERMALLY SPRAYED COATINGS - TECHNICAL SUPPLY CONDITIONS |
| ONORM EN ISO 15630-3 : 2011 | STEEL FOR THE REINFORCEMENT AND PRESTRESSING OF CONCRETE - TEST METHODS - PART 3: PRESTRESSING STEEL |
| I.S. EN ISO 14917:2017 | THERMAL SPRAYING - TERMINOLOGY, CLASSIFICATION (ISO 14917:2017) |
| BS EN ISO 19490:2017 | Dentistry. Sinus membrane elevator |
| 11/30238890 DC : 0 | BS EN ISO 14998 - PETROLEUM AND NATURAL GAS INDUSTRIES - DOWN HOLE EQUIPMENT - COMPLETION ACCESSORIES |
| BS ISO 22068 : 2012 | SINTERED-METAL INJECTION-MOULDED MATERIALS - SPECIFICATIONS |
| DIN EN ISO 9873:2016-03 (Draft) | DENTISTRY - INTRA-ORAL MIRRORS (ISO 9873:2017) |
| BS ISO 10071-2:2005 | Tools for pressing. Ball-lock punches Ball-lock punches for heavy duty |
| BS EN ISO 19715:2017 | Dentistry. Filling instrument with contra angle |
| BS ISO 4498:2005 | Sintered metal materials, excluding hardmetals. Determination of apparent hardness and microhardness |
| I.S. EN ISO 9809-3:2010 | GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 3: NORMALIZED STEEL CYLINDERS |
| 08/30168345 DC : DRAFT JULY 2008 | BS ISO 15136-1 - DOWNHOLE EQUIPMENT FOR PETROLEUM AND NATURAL GAS INDUSTRIES - PROGRESSING CAVITY PUMP SYSTEMS FOR ARTIFICIAL LIFT - PART 1: PUMPS |
| ISO 683-14:2004 | Heat-treatable steels, alloy steels and free-cutting steels — Part 14: Hot-rolled steels for quenched and tempered springs |
| 10/30216835 DC : 2010 | BS ISO 7331 - SKI-POLES FOR ALPINE SKIING - REQUIREMENTS AND TEST METHODS |
| 15/30248084 DC : 0 | BS ISO 11949 - COLD-REDUCED TINMILL PRODUCTS - ELECTROLYTIC TINPLATE |
| 07/30107797 DC : 0 | BS EN 14399-9 - HIGH STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 9: SYSTEM HR OR HV - BOLT AND NUT ASSEMBLIES WITH DIRECT TENSION INDICATORS |
| NF EN ISO 9809-1 : 2010 | GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 1: QUENCHED AND TEMPERED STEEL CYLINDERS WITH TENSILE STRENGTH LESS THAN 1100 MPA |
| EN 4700-002:2016 | Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 002: Bar and section |
| UNI EN ISO 9809-1 : 2010 | GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 1: QUENCHED AND TEMPERED STEEL CYLINDERS WITH TENSILE STRENGTH LESS THAN 1100 MPA |
| BS ISO 10071-1:2008 | Tools for pressing. Ball-lock punches Ball-lock punches for light duty |
| BS ISO 16635-1 : 2013 | DENTISTRY - DENTAL RUBBER DAM TECHNIQUE - PART 1: HOLE PUNCH |
| BS EN 16602-70-46:2014 | Space product assurance. Requirements for manufacturing and procurement of threaded fasteners |
| BS EN ISO 14917:2017 | Thermal spraying. Terminology, classification |
| BS ISO 9182-5:2013 | Tools for pressing. Guide pillars Type D, end-locking pillars with flange |
| PREN 1426 : DRAFT 2013 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF NEEDLE PENETRATION |
| DIN EN ISO 17937:2016-01 | Dentistry - Osteotome (ISO 17937:2015) |
| UNI EN ISO 16635-1 : 2014 | DENTISTRY - DENTAL RUBBER DAM TECHNIQUE - PART 1: HOLE PUNCH |
| PREN 10088-2 : DRAFT 2011 | STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
| ISO 9154:2016 | Aerospace — Bolts, with MJ threads, made of heat-resistant nickel-based alloy, strength class 1 550 MPa — Procurement specification |
| BS ISO 26910-1 : 2009 | SPRINGS - SHOT PEENING - PART 1: GENERAL PROCEDURES |
| API 5CRA : 2010 : INC : ERR 1 : 2011 | SPECIFICATION FOR CORROSION-RESISTANT ALLOY SEAMLESS TUBES FOR USE AS CASING, TUBING AND COUPLING STOCK |
| BS ISO 12891-2:2014 | Retrieval and analysis of surgical implants Analysis of retrieved surgical implants |
| 12/30246071 DC : 0 | BS ISO 15787 - TECHNICAL PRODUCT DOCUMENTATION - HEAT-TREATED FERROUS PARTS - PRESENTATION AND INDICATIONS |
| 13/30252136 DC : 0 | BS ISO 16468 - INVESTMENT CASTINGS (STEEL, NICKEL ALLOYS AND COBALT ALLOYS) - GENERAL TECHNICAL REQUIREMENTS |
| BS ISO 404:2013 | Steel and steel products. General technical delivery requirements |
| DIN EN ISO 7866:2013-01 | Gas cylinders - Refillable seamless aluminium alloy gas cylinders - Design, construction and testing (ISO 7866:2012) |
| 15/30312459 DC : 0 | BS EN ISO 5182 - RESISTANCE WELDING - MATERIALS FOR ELECTRODES AND ANCILLARY EQUIPMENT |
| 15/30304304 DC : 0 | BS EN 12080 - RAILWAY APPLICATIONS - AXLEBOXES - ROLLING BEARINGS |
| 05/30136491 DC : DRAFT JUL 2005 | EN 15311 - THERMAL SPRAYING - COMPONENTS WITH THERMALLY SPRAYED COATINGS - TECHNICAL SUPPLY CONDITIONS |
| API 11D1 REDLINE : 2009 | PACKERS AND BRIDGE PLUGS |
| UNE-EN ISO 18556:2016 | Dentistry - Intraoral spatulas (ISO 18556:2016) |
| 05/30132585 DC : DRAFT APR 2005 | EN 10083-1 - STEELS FOR QUENCHING AND TEMPERING - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS |
| ABMA 10A : 2001 : R2015 | METAL BALLS FOR UNGROUND BEARINGS AND OTHER USES |
| 12/30250146 DC : 0 | BS ISO 16143-1 - STAINLESS STEELS FOR GENERAL PURPOSES - PART 1: FLAT PRODUCTS |
| PREN 12697-31 : DRAFT 2014 | BITUMINOUS MIXTURES - TEST METHODS - PART 31: SPECIMEN PREPARATION BY GYRATORY COMPACTOR |
| ISO 11119-3:2013 | Gas cylinders Refillable composite gas cylinders and tubes Design, construction and testing Part 3: Fully wrapped fibre reinforced composite gas cylinders and tubes up to 450L with non-load-sharing metallic or non-metallic liners |
| BS 2000-49(2015) : 2015 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF NEEDLE PENETRATION |
| BS EN ISO 17078-3:2009 | Petroleum and natural gas industries. Drilling and production equipment Running tools, pulling tools and kick-over tools and latches for side-pocket mandrels |
| API SPEC 16F : 2017 | SPECIFICATION FOR MARINE DRILLING RISER EQUIPMENT |
| BS EN ISO 12156-1:2016 | Diesel fuel. Assessment of lubricity using the high-frequency reciprocating rig (HFRR) Test method |
| API 11B : 2010 | SPECIFICATION FOR SUCKER RODS, POLISHED RODS AND LINERS, COUPLINGS, SINKER BARS, POLISHED ROD CLAMPS, STUFFING BOXES, AND PUMPING TEES |
| UNE-EN 14399-1:2016 | High-strength structural bolting assemblies for preloading - Part 1: General requirements |
| ISO 15787:2016 | Technical product documentation Heat-treated ferrous parts Presentation and indications |
| ISO 14661:2000 | Thermal turbines for industrial applications (steam turbines, gas expansion turbines) General requirements |
| NF EN 3685 : 2008 | AEROSPACE SERIES - BOLTS IN HEAT RESISTING STEEL FE-PA2601 (A286) - CLASSIFICATION: 1100 MPA/650 DEGREES C - TECHNICAL SPECIFICATION |
| API SPEC 14L : 2007 | SPECIFICATION FOR LOCK MANDRELS AND LANDING NIPPLES |
| PREN 4111 : 200P2 | AEROSPACE SERIES - WRENCHES, SPLINED, SOCKETS FOR PIPE FITTINGS - TECHNICAL SPECIFICATION |
| EN 12504-2:2012 | TESTING CONCRETE IN STRUCTURES - PART 2: NON-DESTRUCTIVE TESTING - DETERMINATION OF REBOUND NUMBER |
| BS EN ISO 11961:2008 | Petroleum and natural gas industries. Steel drill pipe |
| I.S. EN ISO 12679:2015 | THERMAL SPRAYING - RECOMMENDATIONS FOR THERMAL SPRAYING (ISO 12679:2011) |
| I.S. EN 62271-202:2014 | HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 202: HIGH-VOLTAGE/LOW-VOLTAGE PREFABRICATED SUBSTATION |
| UNI EN 16281 : 2013 | CHILD PROTECTIVE PRODUCTS - CONSUMER FITTED CHILD RESISTANT LOCKING DEVICES FOR WINDOWS AND BALCONY DOORS - SAFETY REQUIREMENTS AND TEST METHODS |
| I.S. EN ISO 14998:2013 | PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - COMPLETION ACCESSORIES (ISO 14998:2013) |
| ISO 4875-2:2006 | Metal-cutting band saw blades — Part 2: Characteristics and dimensions |
| PREN ISO 683-17 : DRAFT 2013 | HEAT-TREATED STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 17: BALL AND ROLLER BEARING STEELS (ISO/DIS 683-17:2013) |
| I.S. EN ISO 9873:2017 | DENTISTRY - INTRA-ORAL MIRRORS (ISO 9873:2017) |
| EN ISO 11961:2008/AC:2009 | PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL DRILL PIPE |
| BS ISO 1711-2:2016 | Assembly tools for screws and nuts. Technical specifications Machine-operated sockets (impact) |
| ISO 18137:2015 | Leaf springs Technical specifications |
| DIN EN ISO 19715:2016-03 (Draft) | DENTISTRY - FILLING INSTRUMENT WITH CONTRA ANGLE (ISO 19715:2017) |
| PREN 12797 : DRAFT 2017 | BRAZING - DESTRUCTIVE TESTS OF BRAZED JOINTS |
| UNE-ISO 289-1:2018 | Rubber, unvulcanized. Determinations using a shearing-disc viscometer. Part 1: Determination of Mooney viscosity |
| EN 3833:2004 | Aerospace series - Bolts, MJ threads, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), passivated - Classification: 1 550 MPa (at ambient temperature) / 650 °C - Technical specification |
| ISO 11119-2:2012 | Gas cylinders Refillable composite gas cylinders and tubes Design, construction and testing Part 2: Fully wrapped fibre reinforced composite gas cylinders and tubes up to 450 l with load-sharing metal liners |
| ISO 16143-1:2014 | Stainless steels for general purposes Part 1: Corrosion-resistant flat products |
| I.S. EN ISO 16635-2:2014 | DENTISTRY - DENTAL RUBBER DAM INSTRUMENTS - PART 2: CLAMP FORCEPS (ISO 16635-2:2014) |
| PREN 12080 : DRAFT 2015 | RAILWAY APPLICATIONS - AXLEBOXES - ROLLING BEARINGS |
| API 19G1 : 2010 | SIDE-POCKET MANDRELS |
| BS EN 3833:2004 | Aerospace series. Bolts, MJ threads, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), passivated. Classification: 1550 MPa (at ambient temperature) / 650°C. Technical specification |
| NF EN ISO 17078-3 : 2010 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 3: RUNNING TOOLS, PULLING TOOLS AND KICK-OVER TOOLS AND LATCHES FOR SIDE-POCKET MANDRELS |
| NF ISO 7331 : 2011 | SKI-POLES FOR ALPINE SKIING - REQUIREMENTS AND TEST METHODS |
| UNE-EN 10088-4:2010 | Stainless steels - Part 4: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes |
| UNI EN 4700-007 : 2011 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 007: REMELTING STOCK |
| UNI EN ISO 17078-3 : 2009 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 3: RUNNING TOOLS, PULLING TOOLS AND KICK-OVER TOOLS AND LATCHES FOR SIDE-POCKET MANDRELS |
| I.S. EN 4700-006:2010 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 006: PRE-PRODUCTION AND PRODUCTION FORGINGS |
| EN 10083-1:2006 | Steels for quenching and tempering - Part 1: General technical delivery conditions |
| ISO 6336-5:2016 | Calculation of load capacity of spur and helical gears Part 5: Strength and quality of materials |
| ISO 289-1:2015 | Rubber, unvulcanized Determinations using a shearing-disc viscometer Part 1: Determination of Mooney viscosity |
| EN 1426:2015 | Bitumen and bituminous binders - Determination of needle penetration |
| I.S. EN 3299:2007 | AEROSPACE SERIES - SHAFT-NUTS AND THREADED RINGS, SELF-LOCKING, RIGHT- OR LEFT-HAND MJ THREADS, IN HEAT RESISTING STEEL FE-PA2601 (A286), SILVER PLATED - TECHNICAL SPECIFICATION |
| DIN EN ISO 3506-3:2010-04 | Mechanical properties of corrosion-resistant stainless steel fasteners - Part 3: Set screws and similar fasteners not under tensile stress (ISO 3506-3:2009) |
| DIN EN ISO 898-1:2013-05 | MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 1: BOLTS, SCREWS AND STUDS WITH SPECIFIED PROPERTY CLASSES - COARSE THREAD AND FINE PITCH THREAD (ISO 898-1:2013) |
| DIN EN 14772 E : 2005 | FLANGES AND THEIR JOINTS - QUALITY ASSURANCE INSPECTION AND TESTING OF GASKETS IN ACCORDANCE WITH THE EN 1514 AND EN 12560 SERIES OF STANDARDS |
| DIN EN 12080:2015-06 (Draft) | RAILWAY APPLICATIONS - AXLEBOXES - ROLLING BEARINGS |
| DIN EN 14566:2009-10 | MECHANICAL FASTENERS FOR GYPSUM PLASTERBOARD SYSTEMS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| DIN EN ISO 4498:2010-11 | Sintered metal materials, excluding hardmetals - Determination of apparent hardness and microhardness (ISO 4498:2010) |
| DIN EN 10297-1:2003-06 | SEAMLESS CIRCULAR STEEL TUBES FOR MECHANICAL AND GENERAL ENGINEERING PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 1: NON-ALLOY AND ALLOY STEEL TUBES |
| DIN EN 15049:2007-12 | Railway applications - Suspension components - Torsion bar, steel |
| DIN EN ISO 898-5:2012-09 | Mechanical properties of fasteners made of carbon steel and alloy steel - Part 5: Set screws and similar threaded fasteners with specified hardness classes - Coarse thread and fine pitch thread (ISO 898-5:2012) |
| BS EN ISO 3506-1:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners Bolts, screws and studs |
| BS EN ISO 3506-2:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners Nuts |
| ISO 11960:2014 | Petroleum and natural gas industries Steel pipes for use as casing or tubing for wells |
| UNE-EN ISO 6508-3:2015 | Metallic materials - Rockwell hardness test - Part 3: Calibration of reference blocks (ISO 6508-3:2015) |
| ISO 18265:2013 | Metallic materials — Conversion of hardness values |
| BS EN 12080:2017 | Railway applications. Axleboxes. Rolling bearings |
| UNE-EN ISO 6508-2:2015 | Metallic materials - Rockwell hardness test - Part 2: Verification and calibration of testing machines and indenters (ISO 6508-2:2015) |
| BS EN 4359:2006 | Aerospace series. Six lobe recess. Drivers. Technical Specification |
| BS EN 14399-1:2015 | High-strength structural bolting assemblies for preloading General requirements |
| I.S. EN ISO 14920:2015 | THERMAL SPRAYING - SPRAYING AND FUSING OF SELF-FLUXING ALLOYS (ISO 14920:2015) |
| I.S. EN ISO 6508-2:2015 | METALLIC MATERIALS - ROCKWELL HARDNESS TEST - PART 2: VERIFICATION AND CALIBRATION OF TESTING MACHINES AND INDENTERS (ISO 6508-2:2015) |
| I.S. EN 3302:2017 | AEROSPACE SERIES - BOLTS IN HEAT RESISTING STEEL FE-PM1708 (FV535) - CLASSIFICATION: 1000 MPA/550 DEGREES C - TECHNICAL SPECIFICATION |
| I.S. EN ISO 13628-2:2006 | PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 2: UNBONDED FLEXIBLE PIPE SYSTEMS FOR SUBSEA AND MARINE APPLICATIONS |
| DIN EN 12513:2011-05 | Founding - Abrasion resistant cast irons |
| I.S. EN ISO 6508-3:2015 | METALLIC MATERIALS - ROCKWELL HARDNESS TEST - PART 3 - CALIBRATION OF REFERENCE BLOCKS (ISO 6508-3:2015) |
| I.S. EN ISO 7153-1:2016 | SURGICAL INSTRUMENTS - MATERIALS - PART 1: METALS (ISO 7153-1:2016) |
| I.S. EN 12080:2017 | RAILWAY APPLICATIONS - AXLEBOXES - ROLLING BEARINGS |
| I.S. EN 892:2012 | MOUNTAINEERING EQUIPMENT - DYNAMIC MOUNTAINEERING ROPES - SAFETY REQUIREMENTS AND TEST METHODS |
| DIN EN 10208-2:2009-07 | STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 2: PIPES OF REQUIREMENT CLASS B |
| EN 14772:2005 | Flanges and their joints - Quality assurance inspection and testing of gaskets in accordance with the series of standards EN 1514 and EN 12560 |
| I.S. EN ISO 15156-2:2015&LC:2015 | PETROLEUM AND NATURAL GAS INDUSTRIES - MATERIALS FOR USE IN H[2]S-CONTAINING ENVIRONMENTS IN OIL AND GAS PRODUCTION - PART 2: CRACKING-RESISTANT CARBON AND LOW-ALLOY STEELS, AND THE USE OF CAST IRONS (ISO 15156-2:2015) |
| I.S. EN 10088-2:2014 | STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
| EN ISO 7866:2012/AC:2014 | GAS CYLINDERS - REFILLABLE SEAMLESS ALUMINIUM ALLOY GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING (ISO 7866:2012/COR 1:2014) |
| I.S. EN 1426:2015 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF NEEDLE PENETRATION |
| I.S. EN 10205:2016 | COLD REDUCED TINMILL PRODUCTS - BLACKPLATE |
| DIN EN 10208-1:1998-02 | STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 1: PIPES OF REQUIREMENT CLASS A |
| DIN EN 10088-2:2014-12 | STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
| EN ISO 15156-2:2015 | Petroleum and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Part 2: Cracking-resistant carbon and low alloy steels, and the use of cast irons (ISO 15156-2:2015) |
| I.S. EN ISO 18265:2013 | METALLIC MATERIALS - CONVERSION OF HARDNESS VALUES (ISO 18265:2013) |
| I.S. EN ISO 10432:2005 | PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - SUBSURFACE SAFETY VALVE EQUIPMENT |
| I.S. EN ISO 898-1:2013 | MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 1: BOLTS, SCREWS AND STUDS WITH SPECIFIED PROPERTY CLASSES - COARSE THREAD AND FINE PITCH THREAD (ISO 898-1:2013) |
| DIN EN 12697-31:2007-06 | BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 31: SPECIMEN PREPARATION BY GYRATORY COMPACTOR |
| I.S. EN ISO 14310:2008 | PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - PACKERS AND BRIDGE PLUGS |
| I.S. EN 10083-2:2006 | STEELS FOR QUENCHING AND TEMPERING - PART 2: TECHNICAL DELIVERY CONDITIONS FOR NON ALLOY STEELS |
| I.S. EN ISO 11960:2014 | PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR USE AS CASING OR TUBING FOR WELLS (ISO 11960:2014) |
| I.S. EN 12513:2011 | FOUNDING - ABRASION RESISTANT CAST IRONS |
| EN ISO 15156-3:2015 | Petroleum and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys (ISO 15156-3:2015) |
| I.S. EN ISO 9173-1:2016 | DENTISTRY - EXTRACTION FORCEPS - PART 1: GENERAL REQUIREMENTS (ISO 9173-1:2016) |
| I.S. EN ISO 683-17:2014 | HEAT-TREATED STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 17: BALL AND ROLLER BEARING STEELS (ISO 683-17:2014) |
| DIN EN 12080:2017-11 | Railway applications - Axleboxes - Rolling bearings |
| DIN EN 10083-3:2007-01 | STEELS FOR QUENCHING AND TEMPERING - PART 3: TECHNICAL DELIVERY CONDITIONS FOR ALLOY STEELS |
| I.S. EN 14566:2008 | MECHANICAL FASTENERS FOR GYPSUM PLASTERBOARD SYSTEMS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| I.S. EN ISO 898-5:2012 | MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 5: SET SCREWS AND SIMILAR THREADED FASTENERS WITH SPECIFIED HARDNESS CLASSES - COARSE THREAD AND FINE PITCH THREAD (ISO 898-5:2012) |
| I.S. EN ISO 16070:2006 | PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - LOCK MANDRELS AND LANDING NIPPLES |
| DIN EN 957-1:1999-02 | STATIONARY TRAINING EQUIPMENT - PART 1: GENERAL SAFETY REQUIREMENTS AND TEST METHODS |
| I.S. EN 12504-2:2012 | TESTING CONCRETE IN STRUCTURES - PART 2: NON-DESTRUCTIVE TESTING - DETERMINATION OF REBOUND NUMBER |
| I.S. EN ISO 4498:2010 | SINTERED METAL MATERIALS, EXCLUDING HARDMETALS - DETERMINATION OF APPARENT HARDNESS AND MICROHARDNESS |
| I.S. EN ISO 3506-3:2009 | MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS STEEL FASTENERS - PART 3: SET SCREWS AND SIMILAR FASTENERS NOT UNDER TENSILE STRESS |
| I.S. EN 14399-1:2015 | HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 1: GENERAL REQUIREMENTS |
| UNI EN ISO 14998 : 2014 | PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - COMPLETION ACCESSORIES |
| SBAC TS 220 : 1 | TECHNICAL SPECIFICATION FOR UNION NUTS, SELF-LOCKING (UNIFIED THREADS) - HIGH TEMPERATURE NICKEL ALLOY INCONEL 718 CLASSIFICATION R[M] >= 1270 MPA (185000 LBF/IN[2]) @ T[A]/+705 DEGREES C |
| VDI/VDE 2616 Blatt 1:2012-08 | Hardness testing of metallic materials |
| VDI/VDE 2616 Blatt 2:2014-07 | Hardness testing of plastics and elastomers |
| VDI 3405 Blatt 2:2013-08 | Additive manufacturing processes, rapid manufacturing - Beam melting of metallic parts - Qualification, quality assurance and post processing |
| DIN EN ISO 16635-2 E : 2014 | DENTISTRY - DENTAL RUBBER DAM INSTRUMENTS - PART 2: CLAMP FORCEPS (ISO 16635-2:2014) |
| UNE-EN ISO 12690:2011 | Metallic and other inorganic coatings - Thermal spray coordination - Tasks and responsibilities (ISO 12690:2010) |
| DIN EN 16630:2015-06 | PERMANENTLY INSTALLED OUTDOOR FITNESS EQUIPMENT - SAFETY REQUIREMENTS AND TEST METHODS |
| BS EN 3389:2009 | Aerospace series. Fasteners, externally threaded, in heat resisting nickel base alloy NI-PH1302 (Waspaloy). Classification: 1210 MPa/730°C. Manufacturing method optional. Technical specification |
| 09/30214454 DC : 0 | BS EN 2576 - AEROSPACE SERIES BOLTS, MJ THREADS, IN HEAT RESISTING STEEL FE-PA2601 (A286) CLASSIFICATION: 900 MPA (AT AMBIENT TEMPERATURE)/650 DEGREE C TECHNICAL SPECIFICATION |
| DIN EN ISO 26443:2016-09 | Fine ceramics (advanced ceramics, advanced technical ceramics) - Rockwell indentation test for evaluation of adhesion of ceramic coatings (ISO 26443:2008) |
| API 5CRA : 2010 : INC : ERR 1 : 2011 : R2015 | SPECIFICATION FOR CORROSION-RESISTANT ALLOY SEAMLESS TUBES FOR USE AS CASING, TUBING AND COUPLING STOCK |
| 06/30143291 DC : DRAFT MAY 2006 | ISO 5182 - WELDING - MATERIALS FOR RESISTANCE WELDING ELECTRODES AND ANCILLARY EQUIPMENT |
| NF EN ISO 9809-3 : 2011 | GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 3: NORMALIZED STEEL CYLINDERS |
| API SPEC 19OH : 2018 | OPENHOLE ISOLATION EQUIPMENT |
| 08/30160607 DC : DRAFT MAY 2008 | BS ISO 26910-1 - SPRINGS - SHOT PEENING - PART 1: GENERAL PROCEDURES |
| 14/30278521 DC : 0 | BS EN ISO 18556 - DENTISTRY - INTRAORAL SPATULAS |
| BS ISO 17541:2014 | Plastics. Quantitative evaluation of scratch-induced damage and scratch visibility |
| BS EN ISO 12690:2010 | Metallic and other inorganic coatings. Thermal spray coordination. Tasks and responsibilities |
| DIN EN ISO 16635-1:2014-09 | DENTISTRY - DENTAL RUBBER DAM TECHNIQUE - PART 1: HOLE PUNCH (ISO 16635-1:2013) |
| BS EN 3388:2009 | Aerospace series. Fasteners, externally threaded, in heat resisting nickel base alloy NI-PH2601 (Inconel 718). Classification 1275 MPa/650°C. Manufacturing method optional. Technical specification |
| BS EN 16281:2013 | Child protective products. Consumer fitted child resistant locking devices for windows and balcony doors. Safety requirements and test methods |
| BS EN 4700-004:2010 | Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification Wire |
| BS EN 12697-31:2007 | Bituminous mixtures. Test methods for hot mix asphalt Specimen preparation by gyratory compactor |
| ISO 10071-1:2008 | Tools for pressing — Ball-lock punches — Part 1: Ball-lock punches for light duty |
| I.S. EN 957-1:2005 | STATIONARY TRAINING EQUIPMENT - PART 1: GENERAL SAFETY REQUIREMENTS AND TEST METHODS |
| BS ISO 17918:2015 | Corrosion of metals and alloys. Evaluation of selective corrosion of Cu alloys and grey cast iron for power plant components by visual inspection and hardness measurement |
| 15/30285035 DC : 0 | BS EN ISO 14917 - THERMAL SPRAYING - TERMINOLOGY, CLASSIFICATION |
| BS EN ISO 17078-4:2010 | Petroleum and natural gas industries. Drilling and production equipment Practices for side-pocket mandrels and related equipment CD-ROM |
| BS ISO 9154:2016 | Aerospace. Bolts, with MJ threads, made of heat-resistant nickel-based alloy, strength class 1 550 MPa. Procurement specification |
| ISO 7241:2014 | Hydraulic fluid power — Dimensions and requirements of quick-action couplings |
| 04/30074924 DC : DRAFT JUNE 2004 | EN ISO 6508-3 - METALLIC MATERIALS - ROCKWELL HARDNESS TEST - PART 3: CALIBRATION AND REFERENCE BLOCKS (SCALES A, B, C, D, E, F, G, H, K, N, T) |
| BS ISO 9182-3:2013 | Tools for pressing. Guide pillars Type B, end-locking pillars |
| I.S. EN 843-4:2005 | ADVANCED TECHNICAL CERAMICS - MECHANICAL PROPERTIES OF MONOLITHIC CERAMICS AT ROOM TEMPERATURE - PART 4: VICKERS, KNOOP AND ROCKWELL SUPERFICIAL HARDNESS |
| DIN EN 10205:1992-01 | COLD REDUCED TIN-MILL PRODUCTS - BLACKPLATE |
| 03/114555 DC : DRAFT SEP 2003 | EN 14772 - FLANGES AND THEIR JOINTS - QUALITY ASSURANCE INSPECTION AND TESTING OF GASKETS IN ACCORDANCE WITH THE SERIES OF STANDARDS EN 1514 AND EN 12560 |
| BS ISO 5287:2003 | Belt drives. Narrow V-belts for the automotive industry. Fatigue test |
| ISO 9448-10:2013 | Tools for pressing — Guide bushes — Part 10: Form E, gliding bushes, flanged, type 2 |
| API 19G1 CHINESE : 2010 | SIDE-POCKET MANDRELS |
| BS EN 16630:2015 | Permanently installed outdoor fitness equipment. Safety requirements and test methods |
| BS ISO 9448-7:2013 | Tools for pressing. Guide bushes Form F, ball cage bushes, flanged, type 1 |
| 05/30128683 DC : DRAFT FEB 2005 | ISO 5857 - AEROSPACE - BOLTS, WITH MJ THREADS, MADE OF ALLOY STEEL, STRENGTH CLASS 1250 MPA - PROCUREMENT SPECIFICATION |
| API 16A : 2017 | SPECIFICATION FOR DRILL-THROUGH EQUIPMENT |
| 17/30370705 DC : 0 | BS EN 3685 - AEROSPACE SERIES - BOLTS IN HEAT RESISTING STEEL FE-PA2601 (A286) - CLASSIFICATION: 1100 MPA/650 DEGREE C - TECHNICAL SPECIFICATION |
| BS ISO 11749:2014 | Belt drive. V-ribbed belts for the automotive industry. Fatigue test |
| BS EN 4700-002:2016 | Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification Bar and section |
| 08/30182454 DC : DRAFT JULY 2008 | BS EN 10208-1 - STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 1: PIPES OF REQUIREMENT CLASS A |
| UNI EN 4700-005 : 2011 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 005: FORGING STOCK |
| DIN EN ISO 18556:2016-09 | DENTISTRY - INTRAORAL SPATULAS (ISO 18556:2016) |
| DIN EN ISO 12670 E : 2015 | THERMAL SPRAYING - COMPONENTS WITH THERMALLY SPRAYED COATINGS - TECHNICAL SUPPLY CONDITIONS (ISO 12670:2011) |
| PREN 14399-9 : DRAFT 2015 | HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 9: SYSTEM HR OR HV - DIRECT TENSION INDICATORS FOR BOLT AND NUT ASSEMBLIES |
| UNI ISO 9656 : 2011 | PLIERS AND NIPPERS FOR ELECTRONICS - TEST METHODS |
| 14/30295082 DC : 0 | BS ISO 683-3 - HEAT-TREATABLE STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 3: CASE HARDENING STEELS |
| S.R. CWA 17094-3:2016 | POLICE FIREARMS TECHNOLOGY - PART 3: POLICE SHOTGUN AMMUNITION FEATURES - RECOMMENDATIONS |
| I.S. EN 10083-1:2006 | STEELS FOR QUENCHING AND TEMPERING - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS |
| 14/30301841 DC : 0 | BS EN 71-1 - SAFETY OF TOYS - PART 1: MECHANICAL AND PHYSICAL PROPERTIES |
| UNI EN 4700-004 : 2011 | Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 004: Wire |
| BS ISO 18869:2017 | Hydraulic fluid power. Test methods for couplings actuated with or without tools |
| 15/30269176 DC : 0 | BS ISO 6336-5 - CALCULATION OF LOAD CAPACITY OF SPUR AND HELICAL GEARS - PART 5: STRENGTH AND QUALITY OF MATERIALS |
| 11/30254171 DC : 0 | BS EN 10088-2 - STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
| I.S. EN 16602-70-46:2014 | SPACE PRODUCT ASSURANCE - REQUIREMENTS FOR MANUFACTURING AND PROCUREMENT OF THREADED FASTENERS |
| 12/30245294 DC : 0 | BS ISO 16635-1 - DENTISTRY - DENTAL DAM TECHNIQUE - PART 1: HOLE PUNCH |
| BS EN ISO 9809-3:2010 | Gas cylinders. Refillable seamless steel gas cylinders. Design, construction and testing Normalized steel cylinders |
| BS ISO 5857:2008 | Aerospace. Bolts, with MJ threads, made of alloy steel, strength class 1250 MPa. Procurement specification |
| BS ISO 9182-2:2013 | Tools for pressing. Guide pillars Type A, straight pillars |
| DIN EN ISO 17945 E : 2015 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - METALLIC MATERIALS RESISTANT TO SULFIDE STRESS CRACKING IN CORROSIVE PETROLEUM REFINING ENVIRONMENTS (ISO 17945:2015) |
| UNI EN ISO 15630-3 : 2010 | STEEL FOR THE REINFORCEMENT AND PRESTRESSING OF CONCRETE - TEST METHODS - PART 3: PRESTRESSING STEEL |
| 05/30133728 DC : DRAFT MAY 2005 | EN 71-1 - SAFETY OF TOYS - PART 1: MECHANICAL AND PHYSICAL PROPERTIES |
| API 5DP : 2010(R2015) | SPECIFICATION FOR DRILL PIPE |
| 11/30210148 DC : 0 | BS EN ISO 18265 - METALLIC MATERIALS - CONVERSION OF HARDNESS VALUES |
| BS ISO 9448-8:2013 | Tools for pressing. Guide bushes Form G, gliding bushes, stepped, type 1 |
| S.R. CWA 17094-1:2016 | POLICE FIREARMS TECHNOLOGY - PART 1: POLICE PISTOL AND RIFLE AMMUNITION FEATURES - RECOMMENDATIONS |
| DIN EN ISO 9809-3:2010-10 | GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 3: NORMALIZED STEEL CYLINDERS |
| 17/30352970 DC : 0 | BS EN ISO 15630-3 - STEEL FOR THE REINFORCEMENT AND PRESTRESSING OF CONCRETE - TEST METHODS - PART 3: PRESTRESSING STEEL |
| 11/30230615 DC : 0 | BS ISO 683-1 - HEAT-TREATABLE STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 1: NON-ALLOY STEELS FOR QUENCHING AND TEMPERING |
| DIN EN ISO 12679 E : 2015 | THERMAL SPRAYING - RECOMMENDATIONS FOR THERMAL SPRAYING (ISO 12679:2011) |
| 17/30359115 DC : 0 | BS EN ISO 12156-1 - DIESEL FUEL - ASSESSMENT OF LUBRICITY USING THE HIGH-FREQUENCY RECIPROCATING RIG (HFRR) - PART 1: TEST METHOD |
| I.S. EN ISO 19490:2017 | DENTISTRY - SINUS MEMBRANE ELEVATOR (ISO 19490:2017) |
| DIN EN ISO 14917:2015-09 (Draft) | THERMAL SPRAYING - TERMINOLOGY, CLASSIFICATION (ISO 14917:2017) |
| BS ISO 18137:2015 | Leaf springs. Technical specifications |
| BS ISO 14661:2000 | Thermal turbines for industrial applications (steam turbines, gas expansion turbines). General requirements |
| 02/106220 DC : 0 | BS EN 14566 - MECHANICAL FASTENERS FOR PLASTERBOARD SYSTEMS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| 05/30132603 DC : DRAFT APR 2005 | EN 10083-3 - STEELS FOR QUENCHING AND TEMPERING - PART 3: TECHNICAL DELIVERY CONDITIONS FOR ALLOY STEELS |
| 05/30126202 DC : 0 | EN 10088-4 - STAINLESS STEELS - PART 4: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR CONSTRUCTION PURPOSES |
| BS ISO 5743:2004 | Pliers and nippers. General technical requirements |
| BS EN ISO 898-2:2012 | Mechanical properties of fasteners made of carbon steel and alloy steel Nuts with specified property classes. Coarse thread and fine pitch thread |
| BS EN 10083-3 : 2006-08 | STEELS FOR QUENCHING AND TEMPERING - PART 3: TECHNICAL DELIVERY CONDITIONS FOR ALLOY STEELS |
| API 19G4 : 2011 | PRACTICES FOR SIDE-POCKET MANDRELS AND RELATED EQUIPMENT |
| DIN EN ISO 19490 E : 2017 | DENTISTRY - SINUS MEMBRANE ELEVATOR (ISO 19490:2017) |
| I.S. EN ISO 12670:2015 | THERMAL SPRAYING - COMPONENTS WITH THERMALLY SPRAYED COATINGS - TECHNICAL SUPPLY CONDITIONS (ISO 12670:2011) |
| PREN 71-1 : DRAFT 2014 | SAFETY OF TOYS - PART 1: MECHANICAL AND PHYSICAL PROPERTIES |
| ISO 17541:2014 | Plastics Quantitative evaluation of scratch-induced damage and scratch visibility |
| API SPEC 17K : 2017 | SPECIFICATION FOR BONDED FLEXIBLE PIPE |
| BS EN ISO 12679:2015 | Thermal spraying. Recommendations for thermal spraying |
| UNE-EN ISO 12156-1:2016 | Diesel fuel - Assessment of lubricity using the high-frequency reciprocating rig (HFRR) - Part 1: Test method (ISO 12156-1:2016) |
| DIN EN 14399-9:2016-01 (Draft) | HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 9: SYSTEM HR OR HV - DIRECT TENSION INDICATORS FOR BOLT AND NUT ASSEMBLIES |
| API 11D1 CHINESE : 2009 | PACKERS AND BRIDGE PLUGS |
| DIN EN ISO 19490:2016-07 (Draft) | DENTISTRY - SINUS MEMBRANE ELEVATOR (ISO 19490:2017) |
| I.S. EN 4700-001:2010 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 001: PLATE, SHEET AND STRIP |
| I.S. EN ISO 16635-1:2014 | DENTISTRY - DENTAL RUBBER DAM TECHNIQUE - PART 1: HOLE PUNCH (ISO 16635-1:2013) |
| I.S. EN ISO 20957-1:2013 | STATIONARY TRAINING EQUIPMENT - PART 1: GENERAL SAFETY REQUIREMENTS AND TEST METHODS (ISO 20957-1:2013) |
| UNI EN 71-1 : 2015 | SAFETY OF TOYS - PART 1: MECHANICAL AND PHYSICAL PROPERTIES |
| I.S. EN 893:2010 | MOUNTAINEERING EQUIPMENT - CRAMPONS - SAFETY REQUIREMENTS AND TEST METHODS |
| I.S. EN 3833:2005 | AEROSPACE SERIES - BOLTS, MJ THREADS, IN HEAT RESISTING NICKEL BASE ALLOY NI-PH2601 (INCONEL 718), PASSIVATED - CLASSIFICATION: 1550 MPA (AT AMBIENT TEMPERATURE)/650 DEGREE C - TECHNICAL SPECIFICATION |
| ISO 15461:2018 | Steel forgings — Testing frequency, sampling conditions and test methods for mechanical tests |
| UNI EN 4700-003 : 2011 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 003: TUBE |
| ISO 11119-1:2012 | Gas cylinders Refillable composite gas cylinders and tubes Design, construction and testing Part 1: Hoop wrapped fibre reinforced composite gas cylinders and tubes up to 450 l |
| ISO 13584-511:2006 | Industrial automation systems and integration — Parts library — Part 511: Mechanical systems and components for general use — Reference dictionary for fasteners |
| BS ISO 1711-1:2016 | Assembly tools for screws and nuts. Technical specifications Hand-operated wrenches and sockets |
| I.S. EN ISO 7866:2012 | GAS CYLINDERS - REFILLABLE SEAMLESS ALUMINIUM ALLOY GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING (ISO 7866:2012) |
| UNE-EN ISO 16635-1:2014 | Dentistry - Dental rubber dam technique - Part 1: Hole punch (ISO 16635-1:2013) |
| I.S. EN 12697-31:2007 | BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 31: SPECIMEN PREPARATION BY GYRATORY COMPACTOR |
| UNE-EN ISO 898-2:2013 | Mechanical properties of fasteners made of carbon steel and alloy steel - Part 2: Nuts with specified property classes - Coarse thread and fine pitch thread (ISO 898-2:2012) |
| UNE-EN ISO 14917:2017 | Thermal spraying - Terminology, classification (ISO 14917:2017) |
| 14/30310358 DC : 0 | BS EN 12697-31 - BITUMINOUS MIXTURES - TEST METHODS - PART 31: SPECIMEN PREPARATION BY GYRATORY COMPACTOR |
| UNE-EN 10205:2017 | Cold reduced tinmill products - Blackplate |
| ISO 11119-4:2016 | Gas cylinders Refillable composite gas cylinders Design, construction and testing Part 4: Fully wrapped fibre reinforced composite gas cylinders up to 150 l with load-sharing welded metallic liners |
| UNI EN ISO 7866 : 2012 | GAS CYLINDERS - REFILLABLE SEAMLESS ALUMINIUM ALLOY GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING |
| NF EN 3388 : 2009 | AEROSPACE SERIES - FASTENERS, EXTERNALLY THREADED, IN HEAT RESISTING NICKEL BASE ALLOY NI-PH2601 (INCONEL 718) - CLASSIFICATION: 1275 MPA/650 DEGREES C - MANUFACTURING METHOD OPTIONAL - TECHNICAL SPECIFICATION |
| ISO 1711-1:2016 | Assembly tools for screws and nuts Technical specifications Part 1: Hand-operated wrenches and sockets |
| ISO 9809-4:2014 | Gas cylinders Refillable seamless steel gas cylinders Design, construction and testing Part 4: Stainless steel cylinders with an Rm value of less than 1 100 MPa |
| DIN EN 71-1:2015-02 | SAFETY OF TOYS - PART 1: MECHANICAL AND PHYSICAL PROPERTIES |
| UNI EN ISO 11961 : 2009 | PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL DRILL PIPE |
| ISO 16936-1:2005 | Glass in building — Forced-entry security glazing — Part 1: Test and classification by repetitive ball drop |
| ISO 9448-3:2013 | Tools for pressing — Guide bushes — Part 3: Form B, ball cage bushes, plain, type 1 |
| I.S. EN ISO 7492:2018 | DENTISTRY - DENTAL EXPLORER (ISO 7492:2018) |
| ISO 7492:2018 | Dentistry — Dental explorer |
| ISO 26910-1:2009 | Springs — Shot peening — Part 1: General procedures |
| I.S. EN ISO 17078-3:2009 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 3: RUNNING TOOLS, PULLING TOOLS AND KICK-OVER TOOLS AND LATCHES FOR SIDE-POCKET MANDRELS |
| ISO 9448-4:2013 | Tools for pressing — Guide bushes — Part 4: Form C, gliding bushes, headed, type 1 |
| ISO 9182-4:2013 | Tools for pressing Guide pillars Part 4: Type C, pillars with taper lead and bush |
| UNE-EN 10088-2:2015 | Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes |
| I.S. EN 3388:2009 | AEROSPACE SERIES - FASTENERS, EXTERNALLY THREADED, IN HEAT RESISTING NICKEL BASE ALLOY NI-PH2601 (INCONEL 718) - CLASSIFICATION 1275 MPA/650 DEGREES C - MANUFACTURING METHOD OPTIONAL - TECHNICAL SPECIFICATION |
| DIN EN 10083-1:2006-10 | STEELS FOR QUENCHING AND TEMPERING - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS |
| DIN EN 1426:2015-09 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF NEEDLE PENETRATION |
| DIN EN ISO 683-17:2015-02 | Heat-treated steels, alloy steels and free-cutting steels - Part 17: Ball and roller bearing steels (ISO 683-17:2014) |
| EN ISO 13628-2:2006/AC:2009 | PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 2: UNBONDED FLEXIBLE PIPE SYSTEMS FOR SUBSEA AND MARINE APPLICATIONS |
| DIN EN ISO 11960:2014-05 | Petroleum and natural gas industries - Steel pipes for use as casing or tubing for wells (ISO 11960:2014); English version EN ISO 11960:2014, only on CD-ROM |
| UNE-EN 10208-1:2011 | Steel pipes for pipelines for combustible fluids - Technical delivery conditions - Part 1: Pipes of requirement class A |
| DIN EN 10089:2003-04 | Hot rolled steels for quenched and tempered springs - Technical delivery conditions; German version EN 10089:2002 |
| DIN EN 14566 E : 2009 | MECHANICAL FASTENERS FOR GYPSUM PLASTERBOARD SYSTEMS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| ISO 17078-4:2010 | Petroleum and natural gas industries — Drilling and production equipment — Part 4: Practices for side-pocket mandrels and related equipment |
| BS EN 957-1:2005 | Stationary training equipment General safety requirements and test methods |
| UNE-EN 62271-202:2015 | High-voltage switchgear and controlgear - Part 202: High-voltage/low-voltage prefabricated substation |
| BS EN 10208-2:2009 | Steel pipes for pipelines for combustible fluids. Technical delivery conditions Pipes of requirement class B |
| BS EN ISO 642:1999 | Steel hardenability test by end quenching (Jominy test) |
| BS EN ISO 14923:2003 | Thermal spraying. Characterization and testing of thermally sprayed coatings |
| UNE-EN 1426:2015 | Bitumen and bituminous binders - Determination of needle penetration |
| BS EN ISO 898-1:2013 | Mechanical properties of fasteners made of carbon steel and alloy steel Bolts, screws and studs with specified property classes. Coarse thread and fine pitch thread |
| ISO 16635-1:2013 | Dentistry — Dental rubber dam technique — Part 1: Hole punch |
| BS EN 14059:2002 | Decorative oil lamps. Safety requirements and test methods |
| BS EN ISO 17078-2:2007 | Petroleum and natural gas industries. Drilling and production equipment Flow-control devices for side-pocket mandrels |
| BS EN 657:2005 | Thermal spraying. Terminology, classification |
| ISO 26443:2008 | Fine ceramics (advanced ceramics, advanced technical ceramics) — Rockwell indentation test for evaluation of adhesion of ceramic coatings |
| ISO 9173-1:2016 | Dentistry — Extraction forceps — Part 1: General requirements |
| UNE-EN ISO 14920:2015 | Thermal spraying - Spraying and fusing of self-fluxing alloys (ISO 14920:2015) |
| UNI EN ISO 3506-2 : 2010 | MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS-STEEL FASTENERS - PART 2: NUTS |
| ONORM EN ISO 13680 : 2010 | PETROLEUM AND NATURAL GAS INDUSTRIES - CORROSION-RESISTANT ALLOY SEAMLESS TUBES FOR USE AS CASING, TUBING AND COUPLING STOCK - TECHNICAL DELIVERY CONDITIONS |
| UNI EN ISO 13680 : 2010 | PETROLEUM AND NATURAL GAS INDUSTRIES - CORROSION-RESISTANT ALLOY SEAMLESS TUBES FOR USE AS CASING, TUBING AND COUPLING STOCK - TECHNICAL DELIVERY CONDITIONS |
| ONORM EN ISO 3506-2 : 2010 | MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS STEEL FASTENERS - PART 2: NUTS |
| EN ISO 13680:2010 | Petroleum and natural gas industries - Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock - Technical delivery conditions (ISO 13680:2010) |
| EN ISO 12156-1:2016 | Diesel fuel - Assessment of lubricity using the high-frequency reciprocating rig (HFRR) - Part 1: Test method (ISO 12156-1:2016) |
| UNI EN ISO 3506-1 : 2010 | MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS-STEEL FASTENERS - PART 1: BOLTS, SCREWS AND STUDS |
| UNI EN 12504-2 : 2012 | TESTING CONCRETE IN STRUCTURES - PART 2: NON-DESTRUCTIVE TESTING - DETERMINATION OF REBOUND NUMBER |
| ONORM EN ISO 3506-1 : 2010 | MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS STEEL FASTENERS - PART 1: BOLTS, SCREWS AND STUDS |
| EN ISO 16635-1:2014 | Dentistry - Dental rubber dam technique - Part 1: Hole punch (ISO 16635-1:2013) |
| EN ISO 17937:2015 | Dentistry - Osteotome (ISO 17937:2015) |
| EN ISO 14923:2003 | Thermal spraying - Characterization and testing of thermally sprayed coatings (ISO 14923:2003) |
| UNI EN 10208-2 : 2009 | STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 2: PIPES OF REQUIREMENT CLASS B |
| UNI EN ISO 17078-2 : 2009 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 2: FLOW-CONTROL DEVICES FOR SIDE-POCKET MANDRELS |
| UNI EN ISO 4498 : 2010 | SINTERED METAL MATERIALS, EXCLUDING HARDMETALS - DETERMINATION OF APPARENT HARDNESS AND MICROHARDNESS |
| UNI EN ISO 683-17 : 2014 | HEAT-TREATED STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 17: BALL AND ROLLER BEARING STEELS |
| UNI EN ISO 17078-1 : 2010 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 1: SIDE-POCKET MANDRELS |
| UNI EN 12513 : 2011 | Founding - Abrasion resistant cast irons |
| UNI EN 10083-1 : 2006 | STEELS FOR QUENCHING AND TEMPERING - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS |
| UNI EN ISO 18265 : 2014 | METALLIC MATERIALS - CONVERSION OF HARDNESS VALUES |
| UNI EN 893 : 2011 | MOUNTAINEERING EQUIPMENT - CRAMPONS - SAFETY REQUIREMENTS AND TEST METHODS |
| UNI EN 10083-3 : 2006 | STEELS FOR QUENCHING AND TEMPERING - PART 3: TECHNICAL DELIVERY CONDITIONS FOR ALLOY STEELS |
| EN ISO 10432:2004 | Petroleum and natural gas industries - Downhole equipment - Subsurface safety valve equipment (ISO 10432:2004) |
| UNI EN 10218-1 : 2012 | STEEL WIRE AND WIRE PRODUCTS - GENERAL - PART 1: TEST METHODS |
| UNI EN 10208-1 : 2009 | STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 1: PIPES OF REQUIREMENT CLASS A |
| UNI EN ISO 13628-2 : 2007 | PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 2: UNBONDED FLEXIBLE PIPE SYSTEMS FOR SUBSEA AND MARINE APPLICATIONS |
| UNI EN ISO 898-1 : 2013 | MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 1: BOLTS, SCREWS AND STUDS WITH SPECIFIED PROPERTY CLASSES - COARSE THREAD AND FINE PITCH THREAD |
| UNI EN ISO 3506-3 : 2010 | MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS-STEEL FASTENERS - PART 3: SET SCREWS AND SIMILAR FASTENERS NOT UNDER TENSILE STRESS |
| UNI EN 14566 : 2009 | MECHANICAL FASTENERS FOR GYPSUM PLASTERBOARD SYSTEMS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| UNI EN ISO 14310 : 2009 | PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - PACKERS AND BRIDGE PLUGS |
| UNI EN 10084 : 2008 | CASE HARDENING STEELS - TECHNICAL DELIVERY CONDITIONS |
| EN ISO 13628-10:2006 | Petroleum and natural gas industries - Design and operation of subsea production systems - Part 10: Specification for bonded flexible pipe (ISO 13628-10:2006) |
| UNI EN 10088-2:2014 | STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
| UNI EN ISO 898-5 : 2012 | MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 5: SET SCREWS AND SIMILAR THREADED FASTENERS WITH SPECIFIED HARDNESS CLASSES - COARSE THREAD AND FINE PITCH THREAD |
| UNI ISO 9657 : 2011 | PLIERS AND NIPPERS FOR ELECTRONICS - GENERAL TECHNICAL REQUIREMENTS |
| 10/30165716 DC : 0 | BS ISO 898-6 - MECHANICAL PROPERTIES OF FASTENERS - PART 6: NUTS WITH SPECIFIED PROOF LOAD VALUES - FINE PITCH THREAD |
| 07/30161097 DC : 0 | EN ISO 14310 - PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT PACKERS AND BRIDGE PLUGS |
| BS ISO 9448-9:2013 | Tools for pressing. Guide bushes Form B, ball cage bushes, plain, type 2 |
| NF EN ISO 9809-2 : 2010 | GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 2: QUENCHED AND TEMPERED STEEL CYLINDERS WITH TENSILE STRENGTH GREATER THAN OR EQUAL TO 1100 MPA |
| BS ISO 12670 : 2011 COR 2015 | THERMAL SPRAYING - COMPONENTS WITH THERMALLY SPRAYED COATINGS - TECHNICAL SUPPLY CONDITIONS |
| 16/30302544 DC : 0 | BS EN ISO 9873 - DENTISTRY - INTRA-ORAL MIRRORS |
| 10/30196823 DC : 0 | BS ISO 12670 - THERMAL SPRAYING - COMPONENTS WITH THERMALLY SPRAYED COATINGS - TECHNICAL SUPPLY CONDITIONS |
| I.S. EN ISO 5182:2016 | RESISTANCE WELDING - MATERIALS FOR ELECTRODES AND ANCILLARY EQUIPMENT (ISO 5182:2016) |
| API SPEC 5CRA : 2010 | SPECIFICATION FOR CORROSION-RESISTANT ALLOY SEAMLESS TUBES FOR USE AS CASING, TUBING AND COUPLING STOCK |
| 09/30196832 DC : 0 | BS ISO 12690 - THERMAL SPRAYING - THERMAL SPRAY COORDINATION - TASKS AND RESPONSIBILITIES |
| 03/302675 DC : DRAFT FEB 2003 | EN 14616 - THERMAL SPRAYING - RECOMMENDATIONS FOR THERMAL SPRAYING |
| BS EN ISO 22068:2014 | Sintered-metal injection-moulded materials. Specifications |
| 13/30276463 DC : 0 | BS ISO 289-1 - RUBBER, UNVULCANIZED - DETERMINATIONS USING A SHEARING-DISC VISCOMETER - PART 1: DETERMINATION OF MOONEY VISCOSITY |
| DIN EN 10088-4:2010-01 | Stainless steels - Part 4: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes |
| 13/30264734 DC : 0 | BS ISO 17918 - EVALUATION OF SELECTIVE CORROSION OF ALLOYS BY VISUAL INSPECTION AND HARDNESS MEASUREMENT |
| BS ISO 6787:2001 | Assembly tools for screws and nuts. Adjustable wrenches |
| API 14A : 2015 | SPECIFICATION FOR SUBSURFACE SAFETY VALVE EQUIPMENT |
| DIN EN ISO 12679:2015-12 | THERMAL SPRAYING - RECOMMENDATIONS FOR THERMAL SPRAYING (ISO 12679:2011) |
| BS EN ISO 5182:2009 | Resistance welding. Materials for electrodes and ancillary equipment |
| 15/30323937 DC : 0 | BS EN 3302 - AEROSPACE SERIES - BOLTS IN HEAT RESISTING STEEL FE-PM1708 (FV535) - CLASSIFICATION: 1000 MPA/550 DEGREES C - TECHNICAL SPECIFICATION |
| 06/30148173 DC : DRAFT SEP 2006 | ISO 9809-1 - GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 1: QUENCHED AND TEMPERED STEEL CYLINDERS WITH TENSILE STRENGTH LESS THAN 1100 MPA |
| BS ISO 7241:2014 | Hydraulic fluid power. Dimensions and requirements of quick-action couplings |
| DIN EN 16630 E : 2015 | PERMANENTLY INSTALLED OUTDOOR FITNESS EQUIPMENT - SAFETY REQUIREMENTS AND TEST METHODS |
| DIN ISO 7331:2011-10 | Ski-poles for alpine skiing - Requirements and test methods (ISO 7331:2011) |
| 10/30196135 DC : 0 | BS ISO 11515 - GAS CYLINDERS - REFILABLE COMPOSITE REINFORCED TUBES OF WATER CAPACITY BETWEEN 150 L AND 3000 L - DESIGN, CONSTRUCTION AND TESTING |
| UNI EN ISO 22068 : 2014 | SINTERED-METAL INJECTION-MOULDED MATERIALS - SPECIFICATIONS |
| 13/30252560 DC : 0 | BS ISO 7241-1 - HYDRAULIC FLUID POWER - QUICK-ACTION COUPLINGS - PART 1: DIMENSIONS AND REQUIREMENTS |
| I.S. EN 4700-002:2016 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 002: BAR AND SECTION |
| ISO 10384:2012 | Hot-rolled carbon steel sheet as defined by chemical composition |
| BS ISO 9448-11:2013 | Tools for pressing. Guide bushes Form F, ball cage bushes, flanged, type 2 |
| UNE-EN ISO 12679:2016 | Thermal spraying - Recommendations for thermal spraying (ISO 12679:2011) |
| 11/30254168 DC : 0 | BS EN 10088-3 - STAINLESS STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR SEMI-FINISHED PRODUCTS, BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
| 17/30323194 DC : 0 | BS EN ISO 20569 - DENTISTRY - TREPHINE BURS |
| BS EN 4700-003:2010 | Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification Tube |
| BS EN ISO 15156-3:2015 | Petroleum and natural gas industries. Materials for use in H2S-containing environments in oil and gas production Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys |
| DIN EN 16281:2013-04 | CHILD PROTECTIVE PRODUCTS - CONSUMER FITTED CHILD RESISTANT LOCKING DEVICES FOR WINDOWS AND BALCONY DOORS - SAFETY REQUIREMENTS AND TEST METHODS |
| 13/30248090 DC : 0 | BS ISO 11951 - COLD-REDUCED BLACKPLATE IN COIL FORM FOR THE PRODUCTION OF TINPLATE OR ELECTROLYTIC CHROMIUM/CHROMIUM OXIDE-COATED STEEL |
| 14/30294825 DC : 0 | BS EN 10263-1 - STEEL ROD, BARS AND WIRE FOR COLD HEADING AND COLD EXTRUSION - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS |
| I.S. EN 3389:2009 | AEROSPACE SERIES - FASTENERS, EXTERNALLY THREADED, IN HEAT RESISTING NICKEL BASE ALLOY NI-PH1302 (WASPALOY) - CLASSIFICATION: 1210 MPA/730 DEGREE C - MANUFACTURING METHOD OPTIONAL - TECHNICAL SPECIFICATION |
| BS ISO 9448-3:2013 | Tools for pressing. Guide bushes Form B, ball cage bushes, plain, type 1 |
| DIN EN ISO 17937 E : 2016 | DENTISTRY - OSTEOTOME (ISO 17937:2015) |
| BS ISO 9809-4:2014 | Gas cylinders. Refillable seamless steel gas cylinders. Design, construction and testing Stainless steel cylinders with an Rm value of less than 1 100 MPa |
| 11/30253929 DC : 0 | BS EN 4820 - AEROSPACE SERIES - COPPER AND COPPER ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION |
| 05/30136401 DC : DRAFT JULY 2005 | ISO 8642 - AEROSPACE - SELF-LOCKING NUTS WITH MAXIMUM OPERATING TEMPERATURE GREATER THAN 425 DEGREES C - TEST METHODS |
| 11/30230612 DC : 0 | BS ISO 683-11 - HEAT-TREATABLE STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 11: CASE-HARDENING STEELS |
| 13/30242622 DC : 0 | BS ISO 12891-2 - RETRIEVAL AND ANALYSIS OF SURGICAL IMPLANTS - PART 2: ANALYSIS OF RETRIEVED SURGICAL IMPLANTS |
| API 14L : 2007 : R2012 | SPECIFICATION FOR LOCK MANDRELS AND LANDING NIPPLES |
| API 6DSS : 2017-08 | SPECIFICATION FOR SUBSEA PIPELINE VALVES |
| 04/30107683 DC : DRAFT DEC 2004 | BS EN ISO 15136-2 - PETROLEUM AND NATURAL GAS INDUSTRIES - PROGRESSING CAVITY PUMPS SYSTEMS FOR ARTIFICIAL LIFT - PART 2: SURFACE DRIVE SYSTEMS |
| 04/30103964 DC : DRAFT MAY 2004 | BS ISO 16070 - PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - LOCK MANDRELS AND LANDING NIPPLES |
| BS EN ISO 9873:2017 | Dentistry. Intra-oral mirrors |
| ABMA 10A : 2001 | METAL BALLS FOR UNGROUND BEARINGS AND OTHER USES |
| ISO 9448-5:2013 | Tools for pressing — Guide bushes — Part 5: Form D, ball cage bushes, headed, type 1 |
| API 20A : 2017 | CARBON STEEL, ALLOY STEEL, STAINLESS STEEL, AND NICKEL BASE ALLOY CASTINGS FOR USE IN THE PETROLEUM AND NATURAL GAS INDUSTRY |
| BS EN 10263-1:2017 | Steel rod, bars and wire for cold heading and cold extrusion General technical delivery conditions |
| DIN EN ISO 9809-1:2010-10 | GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 1: QUENCHED AND TEMPERED STEEL CYLINDERS WITH TENSILE STRENGTH LESS THAN 1100 MPA |
| NF EN ISO 11961 : 2010 | PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL DRILL PIPE |
| IS 1367 : Part 3 : 2017 | TECHNICAL SUPPLY CONDITIONS FOR THREADED STEEL FASTENERS - PART 3: MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND BOLTS, SCREWS AND STUDS |
| BS EN 10088-4:2009 | Stainless steels Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes |
| ISO 6787:2018 | Assembly tools for screws and nuts — Adjustable wrenches |
| API 17J REDLINE : 2008 | SPECIFICATION FOR UNBONDED FLEXIBLE PIPE |
| I.S. EN ISO 17937:2015 | DENTISTRY - OSTEOTOME (ISO 17937:2015) |
| API 14A RUSSIAN : 2001 | SPECIFICATION FOR SUBSURFACE SAFETY VALVE EQUIPMENT |
| API 19G3 : 2011 | RUNNING TOOLS, PULLING TOOLS, AND KICK-OVER TOOLS AND LATCHES FOR SIDE-POCKET MANDRELS |
| ISO 10432:2004 | Petroleum and natural gas industries Downhole equipment Subsurface safety valve equipment |
| I.S. EN ISO 26443:2016 | FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - ROCKWELL INDENTATION TEST FOR EVALUATION OF ADHESION OF CERAMIC COATINGS (ISO 26443:2008) |
| ISO 9448-8:2013 | Tools for pressing — Guide bushes — Part 8: Form G, gliding bushes, stepped, type 1 |
| BS EN ISO 7492:2018 | Dentistry. Dental explorer |
| NF EN ISO 12690 : 2011 | METALLIC AND OTHER INORGANIC COATINGS - THERMAL SPRAY COORDINATION - TASKS AND RESPONSIBILITIES |
| UNI EN 15638 : 2009 | ICE SKATES - SAFETY REQUIREMENTS AND TEST METHODS |
| ISO 15630-3:2010 | Steel for the reinforcement and prestressing of concrete Test methods Part 3: Prestressing steel |
| ONORM EN ISO 11960 : 2014 | PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR USE AS CASING OR TUBING FOR WELLS (ISO 11960:2014) |
| I.S. EN 15638:2009 | ICE SKATES - SAFETY REQUIREMENTS AND TEST METHODS |
| UNI EN 1627 : 2011 | PEDESTRIAN DOORSETS, WINDOWS, CURTAIN WALLING, GRILLES AND SHUTTERS - BURGLAR RESISTANCE - REQUIREMENTS AND CLASSIFICATION |
| BS ISO 4960:2007 | Cold-reduced carbon steel strip with a mass fraction of carbon over 0,25 % |
| I.S. EN ISO 3266:2010 | FORGED STEEL EYEBOLTS GRADE 4 FOR GENERAL LIFTING PURPOSES (ISO 3266:2010) |
| UNI EN ISO 898-2 : 2012 | MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 2: NUTS WITH SPECIFIED PROPERTY CLASSES - COARSE THREAD AND FINE PITCH THREAD |
| ONORM EN ISO 11961 : 2010 | PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL DRILL PIPE |
| ISO 2415:2004 | Forged shackles for general lifting purposes — Dee shackles and bow shackles |
| DIN EN ISO 9873 E : 2000 | DENTISTRY - INTRA-ORAL MIRRORS (ISO 9873:2017) |
| DIN EN ISO 15630-3:2011-02 | STEEL FOR THE REINFORCEMENT AND PRESTRESSING OF CONCRETE - TEST METHODS - PART 3: PRESTRESSING STEEL |
| ISO 16936-2:2005 | Glass in building — Forced-entry security glazing — Part 2: Test and classification by repetitive impact of a hammer and axe at room temperature |
| 18/30368675 DC : 0 | BS EN 1097-2 - TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 2: METHODS FOR THE DETERMINATION OF RESISTANCE TO FRAGMENTATION |
| UNI EN 4700-001 : 2011 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 001: PLATE, SHEET AND STRIP |
| I.S. EN 3685:2008 | AEROSPACE SERIES - BOLTS IN HEAT RESISTING STEEL FE-PA92HT (A286) - CLASSIFICATION: 1100 MPA/650 DEGREE C - TECHNICAL SPECIFICATION |
| I.S. EN ISO 12156-1:2016 | DIESEL FUEL - ASSESSMENT OF LUBRICITY USING THE HIGH-FREQUENCY RECIPROCATING RIG (HFRR) - PART 1: TEST METHOD (ISO 12156-1:2016) |
| EN 10083-3:2006/AC:2008 | STEELS FOR QUENCHING AND TEMPERING - PART 3: TECHNICAL DELIVERY CONDITIONS FOR ALLOY STEELS |
| ISO 9182-5:2013 | Tools for pressing Guide pillars Part 5: Type D, end-locking pillars with flange |
| ISO 12891-2:2014 | Retrieval and analysis of surgical implants Part 2: Analysis of retrieved surgical implants |
| ISO 6932:2014 | Cold-reduced carbon steel strip with a maximum carbon content of 0,25 % |
| ISO 15601:2000 | Hammers — Technical specifications concerning steel hammer heads — Test procedures |
| ISO 12156-1:2016 | Diesel fuel Assessment of lubricity using the high-frequency reciprocating rig (HFRR) Part 1: Test method |
| ISO 11515:2013 | Gas cylinders — Refillable composite reinforced tubes of water capacity between 450 L and 3000 L — Design, construction and testing |
| EN ISO 15630-3:2010 | Steel for the reinforcement and prestressing of concrete - Test methods - Part 3: Prestressing steel (ISO 15630-3:2010) |
| I.S. EN ISO 12690:2010 | METALLIC AND OTHER INORGANIC COATINGS - THERMAL SPRAY COORDINATION - TASKS AND RESPONSIBILITIES |
| ISO 1711-2:2016 | Assembly tools for screws and nuts Technical specifications Part 2: Machine-operated sockets (impact) |
| ISO 9182-2:2013 | Tools for pressing — Guide pillars — Part 2: Type A, straight pillars |
| I.S. EN 4700-005:2010 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 005: FORGING STOCK |
| ISO 10071-2:2005 | Tools for pressing Ball-lock punches Part 2: Ball-lock punches for heavy duty |
| I.S. EN 71-1:2014 | SAFETY OF TOYS - PART 1: MECHANICAL AND PHYSICAL PROPERTIES |
| ISO 683-11:2012 | Heat-treatable steels, alloy steels and free-cutting steels Part 11: Case-hardening steels |
| I.S. EN 10263-1:2017 | STEEL ROD, BARS AND WIRE FOR COLD HEADING AND COLD EXTRUSION - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS |
| ISO 9657:2004 | Pliers and nippers for electronics — General technical requirements |
| ISO 9448-2:2013 | Tools for pressing — Guide bushes — Part 2: Form A, gliding bushes, plain, type 1 |
| ONORM EN ISO 9809-3 : 2010 | GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 3: NORMALIZED STEEL CYLINDERS |
| DIN EN 893:2011-02 | MOUNTAINEERING EQUIPMENT - CRAMPONS - SAFETY REQUIREMENTS AND TEST METHODS |
| DIN EN 1097-2:2016-07 (Draft) | TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 2: METHODS FOR THE DETERMINATION OF RESISTANCE TO FRAGMENTATION |
| UNE-EN 10208-2:2011 | Steel pipes for pipelines for combustible fluids - Technical delivery conditions - Part 2: Pipes of requirement class B |
| DIN EN 12504-2 E : 2012 | TESTING CONCRETE IN STRUCTURES - PART 2: NON-DESTRUCTIVE TESTING - DETERMINATION OF REBOUND NUMBER |
| DIN EN ISO 14920:2015-04 | Thermal spraying - Spraying and fusing of self-fluxing alloys (ISO 14920:2015) |
| DIN EN 15049 E : 2007 | RAILWAY APPLICATIONS - SUSPENSION COMPONENTS - TORSION BAR, STEEL |
| DIN EN 10084:2008-06 | CASE HARDENING STEELS - TECHNICAL DELIVERY CONDITIONS |
| DIN EN ISO 18265:2014-02 | METALLIC MATERIALS - CONVERSION OF HARDNESS VALUES (ISO 18265:2013) |
| BS EN ISO 13680:2010 | Petroleum and natural gas industries. Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock Technical delivery conditions |
| BS EN ISO 10432:2004 | Petroleum and natural gas industries. Downhole equipment. Subsurface safety valve equipment |
| ISO 13680:2010 | Petroleum and natural gas industries Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock Technical delivery conditions |
| ISO 19715:2017 | Dentistry — Filling instrument with contra angle |
| ISO 12679:2011 | Thermal spraying Recommendations for thermal spraying |
| BS EN ISO 13628-10:2006 | Petroleum and natural gas industries. Design and operation of subseaprod uction systems Specification for bonded flexible pipe |
| I.S. EN 1097-2:2010 | TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 2: METHODS FOR THE DETERMINATION OF RESISTANCE TO FRAGMENTATION |
| BS EN ISO 15156-2:2015 | Petroleum and natural gas industries. Materials for use in H2S-containing environments in oil and gas production Cracking-resistant carbon and low alloy steels, and the use of cast irons |
| BS EN 12513:2011 | Founding. Abrasion resistant cast irons |
| UNE-EN ISO 3506-2:2010 | Mechanical properties of corrosion-resistant stainless steel fasteners - Part 2: Nuts (ISO 3506-2:2009) |
| ISO 17937:2015 | Dentistry Osteotome |
| BS EN 10084 : 2008-06 | CASE HARDENING STEELS - TECHNICAL DELIVERY CONDITIONS |
| ISO 15156-3:2015 | Petroleum and natural gas industries Materials for use in H2S-containing environments in oil and gas production Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys |
| ISO 7331:2011 | Ski-poles for alpine skiing Requirements and test methods |
| ISO 12690:2010 | Metallic and other inorganic coatings Thermal spray coordination Tasks and responsibilities |
| ISO 7153-1:2016 | Surgical instruments Materials Part 1: Metals |
| ISO 3266:2010 | Forged steel eyebolts grade 4 for general lifting purposes |
| UNE-EN ISO 7153-1:2017 | Surgical instruments - Materials - Part 1: Metals (ISO 7153-1:2016) |
| BS EN ISO 4498:2010 | Sintered metal materials, excluding hardmetals. Determination of apparent hardness and microhardness |
| EN ISO 3506-1:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners - Part 1: Bolts, screws and studs (ISO 3506-1:2009) |
| ISO 16070:2005 | Petroleum and natural gas industries Downhole equipment Lock mandrels and landing nipples |
| I.S. EN ISO 3506-2:2009 | MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS STEEL FASTENERS - PART 2: NUTS |
| BS EN 10083-2:2006 | Steels for quenching and tempering Technical delivery conditions for non alloy steels |
| BS EN ISO 15136-2:2006 | Petroleum and natural gas industries. Progressing cavity pump systems for artificial lift Surface drive systems |
| ISO 898-1:2013 | Mechanical properties of fasteners made of carbon steel and alloy steel — Part 1: Bolts, screws and studs with specified property classes — Coarse thread and fine pitch thread |
| ISO 17078-2:2007 | Petroleum and natural gas industries — Drilling and production equipment — Part 2: Flow-control devices for side-pocket mandrels |
| ONORM EN ISO 9809-2 : 2010 | GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 2: QUENCHED AND TEMPERED STEEL CYLINDERS WITH TENSILE STRENGTH GREATER THAN OR EQUAL TO 1100 MPA |
| BS EN 10218-1:2012 | Steel wire and wire products. General Test methods |
| ISO 14917:2017 | Thermal spraying — Terminology, classification |
| ISO 16635-2:2014 | Dentistry Dental rubber dam instruments Part 2: Clamp forceps |
| BS EN ISO 16070:2005 | Petroleum and natural gas industries. Downhole equipment. Lock mandrels and landing nipples |
| UNI EN 1097-2 : 2010 | TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 2: METHODS FOR THE DETERMINATION OF RESISTANCE TO FRAGMENTATION |
| UNE-EN 893:2011 | Mountaineering equipment - Crampons - Safety requirements and test methods |
| ISO 15136-2:2006 | Petroleum and natural gas industries — Progressing cavity pump systems for artificial lift — Part 2: Surface-drive systems |
| BS EN 892 : 2012 | MOUNTAINEERING EQUIPMENT - DYNAMIC MOUNTAINEERING ROPES - SAFETY REQUIREMENTS AND TEST METHODS |
| BS EN 10083-1:2006 | Steels for quenching and tempering General technical delivery conditions |
| ISO 898-5:2012 | Mechanical properties of fasteners made of carbon steel and alloy steel Part 5: Set screws and similar threaded fasteners with specified hardness classes Coarse thread and fine pitch thread |
| ISO 9809-2:2010 | Gas cylinders Refillable seamless steel gas cylinders Design, construction and testing Part 2: Quenched and tempered steel cylinders with tensile strength greater than or equal to 1 100 MPa |
| BS EN 15311:2007 | Thermal spraying. Components with thermally sprayed coatings. Technical supply conditions |
| ISO 18556:2016 | Dentistry Intraoral spatulas |
| ISO 14923:2003 | Thermal spraying Characterization and testing of thermally sprayed coatings |
| ISO 4498:2010 | Sintered metal materials, excluding hardmetals Determination of apparent hardness and microhardness |
| ISO 20957-1:2013 | Stationary training equipment Part 1: General safety requirements and test methods |
| ISO 14920:2015 | Thermal spraying — Spraying and fusing of self-fluxing alloys |
| BS EN ISO 14920:2015 | Thermal spraying. Spraying and fusing of self-fluxing alloys |
| BS EN ISO 683-17:2014 | Heat-treated steels, alloy steels and free-cutting steels Ball and roller bearing steels |
| ISO 7866:2012 | Gas cylinders — Refillable seamless aluminium alloy gas cylinders — Design, construction and testing |
| BS EN ISO 9173-1:2016 | Dentistry. Extraction forceps General requirements |
| ISO 9809-3:2010 | Gas cylinders Refillable seamless steel gas cylinders Design, construction and testing Part 3: Normalized steel cylinders |
| ISO 14998:2013 | Petroleum and natural gas industries — Downhole equipment — Completion accessories |
| ISO 6508-2:2015 | Metallic materials — Rockwell hardness test — Part 2: Verification and calibration of testing machines and indenters |
| ISO 14310:2008 | Petroleum and natural gas industries — Downhole equipment — Packers and bridge plugs |
| ISO 9809-1:2010 | Gas cylinders Refillable seamless steel gas cylinders Design, construction and testing Part 1: Quenched and tempered steel cylinders with tensile strength less than 1 100 MPa |
| ISO 15156-2:2015 | Petroleum and natural gas industries Materials for use in H2S-containing environments in oil and gas production Part 2: Cracking-resistant carbon and low-alloy steels, and the use of cast irons |
| ISO 13625:2002 | Petroleum and natural gas industries — Drilling and production equipment — Marine drilling riser couplings |
| ISO 6508-3:2015 | Metallic materials — Rockwell hardness test — Part 3: Calibration of reference blocks |
| IEC 62271-202:2014 | High-voltage switchgear and controlgear - Part 202: High-voltage/ low-voltage prefabricated substation |
| ISO 898-2:2012 | Mechanical properties of fasteners made of carbon steel and alloy steel — Part 2: Nuts with specified property classes — Coarse thread and fine pitch thread |
| ISO 683-17:2014 | Heat-treated steels, alloy steels and free-cutting steels — Part 17: Ball and roller bearing steels |
| BS EN ISO 17078-1 : 2004 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 1: SIDE-POCKET MANDRELS |
| BS EN 15049:2007 | Railway applications. Suspension components. Torsion bar, steel |
| BS EN 3299:2007 | Aerospace series. Shaft-nuts and threaded rings, self-locking, right- or left-hand MJ threads, in heat resisting steel FE-PA2601 (A286), silver plated. Technical specification |
| ISO 5182:2016 | Resistance welding Materials for electrodes and ancillary equipment |
| UNE-EN ISO 3506-3:2010 | Mechanical properties of corrosion-resistant stainless steel fasteners - Part 3: Set screws and similar fasteners not under tensile stress (ISO 3506-3:2009) |
| UNE-EN 892:2013 | Mountaineering equipment - Dynamic mountaineering ropes - Safety requirements and test methods |
| BS EN 1426:2015 | Bitumen and bituminous binders. Determination of needle penetration |
| BS EN 1097-2:2010 | Tests for mechanical and physical properties of aggregates Methods for the determination of resistance to fragmentation |
| UNE-EN ISO 18265:2014 | Metallic materials - Conversion of hardness values (ISO 18265:2013) |
| ISO 22068:2012 | Sintered-metal injection-moulded materials — Specifications |
| I.S. EN ISO 3506-1:2009 | MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS STEEL FASTENERS - PART 1: BOLTS, SCREWS AND STUDS |
| ISO 19490:2017 | Dentistry — Sinus membrane elevator |
| ISO 17078-3:2009 | Petroleum and natural gas industries Drilling and production equipment Part 3: Running tools, pulling tools and kick-over tools and latches for side-pocket mandrels |
| UNE-EN ISO 683-17:2015 | Heat-treated steels, alloy steels and free-cutting steels - Part 17: Ball and roller bearing steels (ISO 683-17:2014) |
| ISO 12670:2011 | Thermal spraying — Components with thermally sprayed coatings — Technical supply conditions |
| UNE-EN ISO 898-5:2013 | Mechanical properties of fasteners made of carbon steel and alloy steel - Part 5: Set screws and similar threaded fasteners with specified hardness classes - Coarse thread and fine pitch thread (ISO 898-5:2012) |
| UNE-EN 10218-1:2012 | Steel wire and wire products - General - Part 1: Test methods |
| EN ISO 3506-2:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners - Part 2: Nuts (ISO 3506-2:2009) |
| UNE-EN ISO 7866:2013 | Gas cylinders - Refillable seamless aluminium alloy gas cylinders - Design, construction and testing (ISO 7866:2012) |
| UNE-EN ISO 9873:2017 | Dentistry - Intra-oral mirrors (ISO 9873:2017) |
| ISO 9182-3:2013 | Tools for pressing Guide pillars Part 3: Type B, end-locking pillars |
| ISO 17078-1:2004 | Petroleum and natural gas industries — Drilling and production equipment — Part 1: Side-pocket mandrels |
| ISO 17945:2015 | Petroleum, petrochemical and natural gas industries Metallic materials resistant to sulfide stress cracking in corrosive petroleum refining environments |
| ISO 13628-2:2006 | Petroleum and natural gas industries Design and operation of subsea production systems Part 2: Unbonded flexible pipe systems for subsea and marine applications |
| ISO 642:1999 | Steel — Hardenability test by end quenching (Jominy test) |
| UNE 16513:2012 | Assembly tools for screws and nuts. Single head engineer's wrenches. Characteristics and tests methods. |
| EN ISO 22068:2014 | Sintered-metal injection-moulded materials - Specifications (ISO 22068:2012) |
| EN ISO 17945:2015 | Petroleum, petrochemical and natural gas industries - Metallic materials resistant to sulfide stress cracking in corrosive petroleum refining environments (ISO 17945:2015) |
| EN 14399-1:2015 | High-strength structural bolting assemblies for preloading - Part 1: General requirements |
| EN 14059:2002 | Decorative oil lamps - Safety requirements and test methods |
| EN ISO 683-17:2014 | Heat-treated steels, alloy steels and free-cutting steels - Part 17: Ball and roller bearing steels (ISO 683-17:2014) |
| EN ISO 12679:2015 | Thermal spraying - Recommendations for thermal spraying (ISO 12679:2011) |
| EN ISO 18556:2016 | Dentistry - Intraoral spatulas (ISO 18556:2016) |
| EN 14616:2004 | Thermal spraying - Recommendations for thermal spraying |
| EN ISO 17078-3:2009 | Petroleum and natural gas industries - Drilling and production equipment - Part 3: Running tools, pulling tools and kick-over tools and latches for side-pocket mandrels (ISO 17078-3:2009) |
| EN 16630:2015 | Permanently installed outdoor fitness equipment - Safety requirements and test methods |
| EN ISO 898-1:2013 | Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs with specified property classes - Coarse thread and fine pitch thread (ISO 898-1:2013) |
| EN 4700-005:2010 | Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 005: Forging stock |
| EN ISO 7153-1:2016 | Surgical instruments - Materials - Part 1: Metals (ISO 7153-1:2016) |
| EN ISO 20957-1:2013 | Stationary training equipment - Part 1: General safety requirements and test methods (ISO 20957-1:2013) |
| EN 15049:2007 | Railway applications - Suspension components - Torsion bar, steel |
| EN ISO 5182:2016 | RESISTANCE WELDING - MATERIALS FOR ELECTRODES AND ANCILLARY EQUIPMENT (ISO 5182:2016) |
| EN 14399-9:2018 | High-strength structural bolting assemblies for preloading - Part 9: System HR or HV - Direct tension indicators for bolt and nut assemblies |
| EN 16451:2015 | Railway applications - Braking - Brake pad holder |
| EN 16602-70-46:2014 | Space product assurance - Requirements for manufacturing and procurement of threaded fasteners |
| EN 4700-003:2010 | Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 003: Tube |
| EN ISO 19490:2017 | Dentistry - Sinus membrane elevator (ISO 19490:2017) |
| EN ISO 14920:2015 | Thermal spraying - Spraying and fusing of self-fluxing alloys (ISO 14920:2015) |
| EN ISO 18265:2013 | Metallic materials - Conversion of hardness values (ISO 18265:2013) |
| EN 15638:2009 | Ice skates - Safety requirements and test methods |
| EN 843-4 : 2005 | ADVANCED TECHNICAL CERAMICS - MECHANICAL PROPERTIES OF MONOLITHIC CERAMICS AT ROOM TEMPERATURE - PART 4: VICKERS, KNOOP AND ROCKWELL SUPERFICIAL HARDNESS |
| EN ISO 4498:2010 | Sintered metal materials, excluding hardmetals - Determination of apparent hardness and microhardness (ISO 4498:2010) |
| EN ISO 14310:2008 | Petroleum and natural gas industries - Downhole equipment - Packers and bridge plugs (ISO 14310:2008) |
| EN ISO 9809-1:2010 | Gas cylinders - Refillable seamless steel gas cylinders - Design, construction and testing - Part 1: Quenched and tempered steel cylinders with tensile strength less than 1 100 MPa (ISO 9809-1:2010) |
| EN 657:2005 | Thermal spraying - Terminology, classification |
| EN ISO 9809-3:2010 | Gas cylinders - Refillable seamless steel gas cylinders - Design, construction and testing - Part 3: Normalized steel cylinders (ISO 9809-3:2010) |
| EN ISO 14917:2017 | Thermal spraying - Terminology, classification (ISO 14917:2017) |
| EN 15311:2007 | Thermal spraying - Components with thermally sprayed coatings - Technical supply conditions |
| EN 4700-007:2010 | Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 007: Remelting stock |
| EN 4359:2006 | Aerospace series - Six lobe recess - Drivers - Technical specification |
| EN ISO 3266:2010/A1:2015 | FORGED STEEL EYEBOLTS GRADE 4 FOR GENERAL LIFTING PURPOSES (ISO 3266:2010+A1:2015) |
| EN ISO 16635-2:2014 | Dentistry - Dental rubber dam instruments - Part 2: Clamp forceps(ISO 16635-2:2014) |
| EN ISO 9809-2:2010 | Gas cylinders - Refillable seamless steel gas cylinders - Design, construction and testing - Part 2: Quenched and tempered steel cylinders with tensile strength greater than or equal to 1 100 MPa (ISO 9809-2:2010) |
| EN ISO 642:1999 | Steel - Hardenability test by end quenching (Jominy test) (ISO 642:1999) |
| EN ISO 19715:2017 | Dentistry - Filling instrument with contra angle (ISO 19715:2017) |
| EN ISO 16070:2005 | Petroleum and natural gas industries - Downhole equipment - Lock mandrels and landing nipples (ISO 16070:2005) |
| EN 14566:2008+A1:2009 | Mechanical fasteners for gypsum plasterboard systems - Definitions, requirements and test methods |
| EN 16281:2013 | Child protective products - Consumer fitted child resistant locking devices for windows and balcony doors - Safety requirements and test methods |
| EN 3299:2007 | Aerospace series - Shaft-nuts and threaded rings, self-locking, right- or left-hand MJ threads, in heat resisting steel FE-PA2601 (A286), silver plated - Technical specification |
| EN ISO 14998:2013 | Petroleum and natural gas industries - Downhole equipment - Completion accessories (ISO 14998:2013) |
| EN ISO 17078-4:2010 | Petroleum and natural gas industries - Drilling and production equipment - Part 4: Practices for side-pocket mandrels and related equipment (ISO 17078-4:2010) |
| EN 3685 : 2008 | AEROSPACE SERIES - BOLTS IN HEAT RESISTING STEEL FE-PA92HT (A286) - CLASSIFICATION: 1100 MPA/650 DEGREE C - TECHNICAL SPECIFICATION |
| EN ISO 15136-2:2006 | Petroleum and natural gas industries - Progressing cavity pump systems for artificial lift - Part 2: Surface-drive systems (ISO 15136-2:2006) |
| EN 957-1:2005 | Stationary training equipment - Part 1: General safety requirements and test methods |
| EN 3388 : 2009 | AEROSPACE SERIES - FASTENERS, EXTERNALLY THREADED, IN HEAT RESISTING NICKEL BASE ALLOY NI-PH2601 (INCONEL 718) - CLASSIFICATION 1275 MPA/650 DEGREES C - MANUFACTURING METHOD OPTIONAL - TECHNICAL SPECIFICATION |
| EN ISO 3506-3:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners - Part 3: Set screws and similar fasteners not under tensile stress (ISO 3506-3:2009) |
| EN 4700-004:2010 | Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 004: Wire |
| EN 3302:2017 | Aerospace series - Bolts in heat resisting steel FE-PM1708 (FV535) - Classification: 1 000 MPa/550 °C - Technical specification |
| EN 4700-001:2010 | Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 001: Plate, sheet and strip |
| EN ISO 13625:2002 | Petroleum and natural gas industries - Drilling and production equipment - Marine drilling riser couplings (ISO 13625:2002) |
| EN ISO 898-5:2012 | Mechanical properties of fasteners made of carbon steel and alloy steel - Part 5: Set screws and similar threaded fasteners with specified hardness classes - Coarse thread and fine pitch thread (ISO 898-5:2012) |
| EN 4700-006:2010 | Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 006: Pre-production and production forgings |
| EN ISO 12670:2015 | Thermal spraying - Components with thermally sprayed coatings - Technical supply conditions (ISO 12670:2011) |
| EN 3389 : 2009 | AEROSPACE SERIES - FASTENERS, EXTERNALLY THREADED, IN HEAT RESISTING NICKEL BASE ALLOY NI-PH1302 (WASPALOY) - CLASSIFICATION: 1210 MPA/730 DEGREE C - MANUFACTURING METHOD OPTIONAL - TECHNICAL SPECIFICATION |
| EN 893:2010 | Mountaineering equipment - Crampons - Safety requirements and test methods |
| BIS IS 3660-7 : 2013 | METHODS OF TEST FOR NATURAL RUBBER - PART 7: DETERMINATION OF MOONEY VISCOSITY |
| DIN EN ISO 19715 E : 2017 | DENTISTRY - FILLING INSTRUMENT WITH CONTRA ANGLE (ISO 19715:2017) |
| 09/30214463 DC : 0 | BS EN 2582 - AEROSPACE SERIES BOLTS, MJ THREADS, IN HEAT RESISTING NICKEL BASE ALLOY NI-PH1302 (WASPALOY) CLASSIFICATION: 1210 MPA (AT AMBIENT TEMPERATURE)/730 DEGREE C TECHNICAL SPECIFICATION |
| BS EN 16451:2015 | Railway applications. Braking. Brake pad holder |
| 04/30105010 DC : DRAFT JUL 2004 | ISO 12156-1 - DIESEL FUEL - ASSESSMENT OF LUBRICITY USING THE HIGH-FREQUENCY RECIPROCATING RIG (HFRR) - PART 1: TEST METHOD |
| BS ISO 8642:2008 | Aerospace. Self-locking nuts with maximum operating temperature greater than 425 degrees C. Test methods |
| DIN EN ISO 22068:2014-06 | Sintered-metal injection-moulded materials - Specifications (ISO 22068:2012) |
| I.S. EN 10208-1:2009 | STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 1: PIPES OF REQUIREMENT CLASS A |
| BS EN ISO 16635-1:2014 | Dentistry. Dental rubber dam technique Hole punch |
| DIN EN 15638 E : 2009 | ICE SKATES - SAFETY REQUIREMENTS AND TEST METHODS |
| PREN 10263-1 : DRAFT 2014 | STEEL ROD, BARS AND WIRE FOR COLD HEADING AND COLD EXTRUSION - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS |
| DIN EN 1627:2011-09 | Pedestrian doorsets, windows, curtain walling, grilles and shutters - Burglar resistance - Requirements and classification |
| BS ISO 9448-5:2013 | Tools for pressing. Guide bushes Form D, ball cage bushes, headed, type 1 |
| DIN EN ISO 12670:2015-12 | THERMAL SPRAYING - COMPONENTS WITH THERMALLY SPRAYED COATINGS - TECHNICAL SUPPLY CONDITIONS (ISO 12670:2011) |
| ISO 13533:2001 | Petroleum and natural gas industries — Drilling and production equipment — Drill-through equipment |
| BS ISO 9448-6:2013 | Tools for pressing. Guide bushes Form E, gliding bushes, flanged, type 1 |
| EN ISO 11960:2014 | PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR USE AS CASING OR TUBING FOR WELLS (ISO 11960:2014) |
| 08/30146353 DC : DRAFT MAR 2008 | BS EN ISO 17078-4 - PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 4: PRACTICES FOR SIDE-POCKET MANDRELS AND RELATED EQUIPMENT |
| BS ISO 16468:2015 | Investment castings (steel, nickel alloys and cobalt alloys). General technical requirements |
| 16/30320762 DC : 0 | BS EN 1097-2 - TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 2: METHODS FOR THE DETERMINATION OF RESISTANCE TO FRAGMENTATION |
| BS EN ISO 26443:2016 | Fine ceramics (advanced ceramics, advanced technical ceramics). Rockwell indentation test for evaluation of adhesion of ceramic coatings |
| BS EN 15638:2009 | Ice skates. Safety requirements and test methods |
| 16/30327498 DC : 0 | BS ISO 1711-1 - ASSEMBLY TOOLS FOR SCREWS AND NUTS - TECHNICAL SPECIFICATIONS - PART 1: HAND-OPERATED WRENCHES AND SOCKETS |
| API 16A CHINESE : 2004 | SPECIFICATION FOR DRILL-THROUGH EQUIPMENT |
| 17/30352980 DC : 0 | BS EN ISO 14918 - THERMAL SPRAYING - QUALIFICATION TESTING OF THERMAL SPRAYERS |
| 17/30361675 DC : 0 | BS EN 3299 - AEROSPACE SERIES - SHAFT-NUTS AND THREADED RINGS, SELF-LOCKING, RIGHT- OR LEFT-HAND MJ THREADS, IN HEAT RESISTING STEEL FE-PA2601 (A286), SILVER-PLATED - TECHNICAL SPECIFICATION |
| I.S. EN 4700-003:2010 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 003: TUBE |
| PREN 10088-3 : DRAFT 2011 | STAINLESS STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR SEMI-FINISHED PRODUCTS, BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
| UNE-EN ISO 17937:2016 | Dentistry - Osteotome (ISO 17937:2015) |
| DIN ISO 4498 E : 2005 | SINTERED METAL MATERIALS, EXCLUDING HARDMETALS - DETERMINATION OF APPARENT HARDNESS AND MICROHARDNESS |
| BS EN ISO 17945:2015 | Petroleum, petrochemical and natural gas industries. Metallic materials resistant to sulfide stress cracking in corrosive petroleum refining environments |
| 13/30280533 DC : 0 | BS ISO 6932 - COLD-REDUCED CARBON STEEL STRIP WITH A MAXIMUM CARBON CONTENT OF 0,25% |
| 07/30162947 DC : 0 | BS EN ISO 15630-3 - STEEL FOR THE REINFORCEMENT AND PRESTRESSING OF CONCRETE - TEST METHODS - PART 3: PRESTRESSING STEEL |
| 03/306713 DC : DRAFT APR 2003 | EN 657 - THERMAL SPRAYING - TERMINOLOGY, CLASSIFICATION |
| DIN ISO 12844 E : 2006 | RAW OPTICAL GLASS - GRINDABILITY WITH DIAMOND PELLETS - TEST METHOD AND CLASSIFICATION |
| BS EN 4700-007:2010 | Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification Remelting stock |
| 03/311760 DC : DRAFT JULY 2003 | ISO 10432 - PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - SUBSURFACE SAFETY VALVE EQUIPMENT |
| 12/30246399 DC : 0 | BS ISO 11749 - BELT DRIVE - V-RIBBED BELTS FOR THE AUTOMOTIVE INDUSTRY - FATIGUE TEST |
| BS ISO 9657:2004 | Pliers and nippers for electronics. General technical requirements |
| ONORM EN ISO 7866 : 2014 | GAS CYLINDERS - REFILLABLE SEAMLESS ALUMINIUM ALLOY GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING (ISO 7866:2012 + COR 1:2014) |
| DIN EN ISO 17945:2015-08 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - METALLIC MATERIALS RESISTANT TO SULFIDE STRESS CRACKING IN CORROSIVE PETROLEUM REFINING ENVIRONMENTS (ISO 17945:2015) |
| DIN EN 16451 E : 2015 | RAILWAY APPLICATIONS - BRAKING - BRAKE PAD HOLDER |
| API 5CRA CHINESE : 2011 | SPECIFICATION FOR CORROSION RESISTANT ALLOY SEAMLESS TUBES FOR USE AS CASING, TUBING AND COUPLING STOCK |
| PD CEN/TS 16700:2014 | Paints and varnishes. Coating materials and coating systems for exterior wood. Assessment of resistance to impact of a coating on a wooden substrate |
| 13/30286138 DC : 0 | BS EN 16654 - CHILD PROTECTIVE PRODUCTS - CONSUMER FITTED FINGER PROTECTION DEVICES FOR DOORS - SAFETY REQUIREMENTS AND TEST METHODS |
| DIN EN ISO 9809-2:2010-10 | GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 2: QUENCHED AND TEMPERED STEEL CYLINDERS WITH TENSILE STRENGTH GREATER THAN OR EQUAL TO 1100 MPA |
| BS ISO 16143-1:2014 | Stainless steels for general purposes Corrosion-resistant flat products |
| UNE-EN 16281:2013 | Child protective products - Consumer fitted child resistant locking devices for windows and balcony doors - Safety requirements and test methods |
| 06/30151815 DC : 0 | BS ISO 898-1 - MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 1: BOLTS, SCREWS AND STUDS |
| UNE-EN ISO 22068:2014 | Sintered-metal injection-moulded materials - Specifications (ISO 22068:2012) |
| BS ISO 12679 : 2011 | THERMAL SPRAYING - RECOMMENDATIONS FOR THERMAL SPRAYING |
| UNE-EN 71-1:2015 | Safety of toys - Part 1: Mechanical and physical properties |
| 10/30165712 DC : 0 | BS ISO 898-2 - MECHANICAL PROPERTIES OF FASTENERS - PART 2: NUTS WITH SPECIFIED PROOF LOAD VALUES; COARSE THREAD |
| BS ISO 6336-5:2016 | Calculation of load capacity of spur and helical gears Strength and quality of materials |
| 15/30332554 DC : 0 | BS EN 14399-9 - HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 9: SYSTEM HR OR HV - DIRECT TENSION INDICATORS FOR BOLT AND NUT ASSEMBLIES |
| 17/30344532 DC : 0 | BS ISO 6502-3 - RUBBER - MEASUREMENT OF VULCANIZATION CHARACTERISTICS USING CUREMETERS - PART 3: ROTORLESS CUREMETER |
| 08/30182457 DC : DRAFT JULY 2008 | BS EN 10208-2 - STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 2: PIPES OF REQUIREMENT CLASS B |
| BS EN ISO 17937:2015 | Dentistry. Osteotome |
| DD CEN/TS 1071-8:2004 | Advanced technical ceramics. Methods of test for ceramic coatings Rockwell indentation test for evaluation of adhesion |
| ABMA ISO 14190 : 1997 | AEROSPACE - AIRFRAME ROLLING BEARINGS: BALL AND SPHERICAL ROLLER BEARINGS - TECHNICAL SPECIFICATION |
| BS EN ISO 15630-3:2010 | Steel for the reinforcement and prestressing of concrete. Test methods Prestressing steel |
| BS ISO 11515 : 2013 | GAS CYLINDERS - REFILLABLE COMPOSITE REINFORCED TUBES OF WATER CAPACITY BETWEEN 450 L AND 3000 L - DESIGN, CONSTRUCTION AND TESTING |
| 17/30335249 DC : 0 | BS EN ISO 898-3 - MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 3: FLAT WASHERS WITH SPECIFIED PROPERTY CLASSES |
| BS ISO 5182 : 2008 | RESISTANCE WELDING - MATERIALS FOR ELECTRODES AND ANCILLARY EQUIPMENT |
| BS ISO 6932:2014 | Cold-reduced carbon steel strip with a maximum carbon content of 0,25 % |
| BS A 363:2000 | Bolts, with MJ threads, made of heat-resistant nickel-based alloy, strength class 1 550 MPa. Procurement specification |
| 03/313799 DC : DRAFT AUG 2003 | ISO 11960 - PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR USE AS CASING OR TUBING FOR WELLS |
| API 19G2 : 2010 | FLOW-CONTROL DEVICES FOR SIDE-POCKET MANDRELS |
| UNE-EN 16630:2015 | Permanently installed outdoor fitness equipment - Safety requirements and test methods |
| BS EN 71-1 : 2014 | SAFETY OF TOYS - PART 1: MECHANICAL AND PHYSICAL PROPERTIES |
| BS EN 3685:2008 | Aerospace series. Bolts in heat resisting steel FE-PA2601 (A286). Classification: 1100 MPa/650 °C. Technical specification |
| 05/30132598 DC : DRAFT APR 2005 | EN 10083-2 - STEELS FOR QUENCHING AND TEMPERING - PART 2: TECHNICAL DELIVERY CONDITIONS FOR NON ALLOYS STEELS |
| 03/314809 DC : DRAFT SEP 2003 | EN ISO 13680 - PETROLEUM AND NATURAL GAS INDUSTRIES - CORROSION-RESISTANT ALLOY SEAMLESS TUBES FOR USE AS CASING, TUBING AND COUPLING STOCK - TECHNICAL DELIVERY CONDITIONS |
| BS 2A 295:2000 | Nuts, self-locking, with maximum operating temperature less than or equal to 425°C. Test methods |
| ISO 9448-11:2013 | Tools for pressing — Guide bushes — Part 11: Form F, ball cage bushes, flanged, type 2 |
| UNI EN ISO 9809-2 : 2010 | GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 2: QUENCHED AND TEMPERED STEEL CYLINDERS WITH TENSILE STRENGTH GREATER THAN OR EQUAL TO 1100 MPA |
| API SPEC 16C : 2015 | CHOKE AND KILL EQUIPMENT |
| DIN EN ISO 12690:2011-04 | Metallic and other inorganic coatings - Thermal spray coordination - Tasks and responsibilities (ISO 12690:2010) |
| DIN EN ISO 15630-3 E : 2011 | STEEL FOR THE REINFORCEMENT AND PRESTRESSING OF CONCRETE - TEST METHODS - PART 3: PRESTRESSING STEEL |
| I.S. EN ISO 19715:2017 | DENTISTRY - FILLING INSTRUMENT WITH CONTRA ANGLE (ISO 19715:2017) |
| API SPEC 19AC : 2016 | SPECIFICATION FOR COMPLETION ACCESSORIES |
| PREN 4700-002 : 200P3 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 002: BAR AND SECTION |
| API 16A : 2017 : INC : ERR 1+ERR2+ADD1 : 2018 | SPECIFICATION FOR DRILL-THROUGH EQUIPMENT |
| I.S. EN 16451:2015 | RAILWAY APPLICATIONS - BRAKING - BRAKE PAD HOLDER |
| ISO 8124-1:2018 | Safety of toys — Part 1: Safety aspects related to mechanical and physical properties |
| I.S. EN 1627:2011 | PEDESTRIAN DOORSETS, WINDOWS, CURTAIN WALLING, GRILLES AND SHUTTERS - BURGLAR RESISTANCE - REQUIREMENTS AND CLASSIFICATION |
| UNE 16559:2000 | Pipe cutting tools. Plastic and cooper pipe automatic cutters. Specifications and tests. |
| I.S. EN ISO 22068:2014 | SINTERED-METAL INJECTION-MOULDED MATERIALS - SPECIFICATIONS (ISO 22068:2012) |
| ISO 5718:2013 | Harvesting equipment — Blades for agricultural rotary mowers — Requirements |
| I.S. EN 16630:2015 | PERMANENTLY INSTALLED OUTDOOR FITNESS EQUIPMENT - SAFETY REQUIREMENTS AND TEST METHODS |
| I.S. EN ISO 15156-3:2015&LC:2015 | PETROLEUM AND NATURAL GAS INDUSTRIES - MATERIALS FOR USE IN H[2]S-CONTAINING ENVIRONMENTS IN OIL AND GAS PRODUCTION - PART 3: CRACKING-RESISTANT CRAS (CORROSION-RESISTANT ALLOYS) AND OTHER ALLOYS (ISO 15156-3:2015) |
| EN 71-1:2014 | Safety of toys - Part 1: Mechanical and physical properties |
| ISO 18869:2017 | Hydraulic fluid power — Test methods for couplings actuated with or without tools |
| EN ISO 7492:2018 | Dentistry - Dental explorer (ISO 7492:2018) |
| ISO 7689:2008 | Aerospace Bolts, with MJ threads, made of alloy steel, strength class 1 100 MPa Procurement specification |
| I.S. EN 4700-004:2010 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 004: WIRE |
| ISO 7481:2000 | Aerospace — Nuts, self-locking, with maximum operating temperature less than or equal to 425 degrees C — Test methods |
| BS EN 14399-9:2009 | High strength structural bolting for preloading System HR or HV. Direct tension indicators for bolt and nut assemblies |
| ISO 9656:2004 | Pliers and nippers for electronics — Test methods |
| UNI EN 10088-4 : 2009 | STAINLESS STEELS - PART 4: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR CONSTRUCTION PURPOSES |
| UNI EN ISO 20957-1 : 2013 | STATIONARY TRAINING EQUIPMENT - PART 1: GENERAL SAFETY REQUIREMENTS AND TEST METHODS |
| I.S. EN ISO 11961:2008 | PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL DRILL PIPE |
| ASTM A 1058 : 2014 : REDLINE | Standard Test Methods for Mechanical Testing of Steel Products—Metric |
| ISO 4254-13:2012 | Agricultural machinery — Safety — Part 13: Large rotary mowers |
| BS ISO 5718:2013 | Harvesting equipment. Blades for agricultural rotary mowers. Requirements |
| EN 12697-31:2007 | Bituminous mixtures - Test methods for hot mix asphalt - Part 31: Specimen preparation by gyratory compactor |
| EN ISO 9873:2017 | Dentistry - Intra-oral mirrors (ISO 9873:2017) |
| I.S. EN 10088-4:2009 | STAINLESS STEELS - PART 4: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR CONSTRUCTION PURPOSES |
| I.S. EN 10083-3:2006 | STEELS FOR QUENCHING AND TEMPERING - PART 3: TECHNICAL DELIVERY CONDITIONS FOR ALLOY STEELS |
| ISO 4960:2007 | Cold-reduced carbon steel strip with a mass fraction of carbon over 0,25 % |
| ISO 9448-6:2013 | Tools for pressing — Guide bushes — Part 6: Form E, gliding bushes, flanged, type 1 |
| I.S. EN 14399-9:2009 | HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 9: SYSTEM HR OR HV - DIRECT TENSION INDICATORS FOR BOLT AND NUT ASSEMBLIES |
| EN ISO 17078-2:2007/AC:2009 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 2: FLOW-CONTROL DEVICES FOR SIDE-POCKET MANDRELS |
| ISO 3506-1:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners Part 1: Bolts, screws and studs |
| EN ISO 13533:2001/AC:2006 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - DRILL-THROUGH EQUIPMENT |
| EN ISO 17078-1:2004/A1:2010 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 1: SIDE-POCKET MANDRELS |
| ISO 3506-3:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners Part 3: Set screws and similar fasteners not under tensile stress |
| DIN EN 14399-1:2015-04 | HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 1: GENERAL REQUIREMENTS |
| DIN EN ISO 9173-1 E : 2017 | DENTISTRY - EXTRACTION FORCEPS - PART 1: GENERAL REQUIREMENTS (ISO 9173-1:2016) |
| DIN EN 957-1:2005-11 | STATIONARY TRAINING EQUIPMENT - PART 1: GENERAL SAFETY REQUIREMENTS AND TEST METHODS |
| DIN EN 10083-1 E : 2006 | STEELS FOR QUENCHING AND TEMPERING - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS |
| CSA B51 : 2014 | BOILER, PRESSURE VESSEL, AND PRESSURE PIPING CODE |
| DIN EN ISO 9173-1:2015-02 (Draft) | DENTISTRY - EXTRACTION FORCEPS - PART 1: GENERAL REQUIREMENTS (ISO 9173-1:2016) |
| BS EN 10297-1:2003 | Seamless circular steel tubes for mechanical and general engineering purposes. Technical delivery conditions Non-alloy and alloy steel tubes |
| BS EN ISO 6508-2:2015 | Metallic materials. Rockwell hardness test Verification and calibration of testing machines and indenters |
| EN 1097-2:2010 | Tests for mechanical and physical properties of aggregates - Part 2: Methods for the determination of resistance to fragmentation |
| BS EN 10208-1:2009 | Steel pipes for pipelines for combustible fluids. Technical delivery conditions Pipes of requirement class A |
| BS EN 10088-2:2014 | Stainless steels Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes |
| DIN EN 12504-2:2012-12 | Testing concrete in structures - Part 2: Non-destructive testing - Determination of rebound number |
| ISO 13628-10:2005 | Petroleum and natural gas industries — Design and operation of subsea production systems — Part 10: Specification for bonded flexible pipe |
| BS EN ISO 6508-3:2015 | Metallic materials. Rockwell hardness test Calibration of reference blocks |
| BS EN 843-4:2005 | Advanced technical ceramics. Mechanical properties of monolithic ceramics at room temperature Vickers, Knoop and Rockwell superficial hardness |
| BS EN ISO 13533:2002 | Petroleum and natural gas industries. Drilling and production equipment. Drill-through equipment |
| BS EN ISO 18265:2013 | Metallic materials. Conversion of hardness values |
| BS EN ISO 13625:2002 | Petroleum and natural gas industries. Drilling and production equipment. Marine drilling riser couplings |
| BS EN 62271-202:2014 | High-voltage switchgear and controlgear High-voltage/low-voltage prefabricated substation |
| BS EN ISO 898-5:2012 | Mechanical properties of fasteners made of carbon steel and alloy steel Set screws and similar threaded fasteners with specified hardness classes. Coarse thread and fine pitch thread |
| DIN EN 14772:2005-04 | Flanges and their joints - Quality assurance inspection and testing of gaskets in accordance with the series of standards EN 1514 and EN 12560 |
| EN 10084:2008 | Case hardening steels - Technical delivery conditions |
| ONORM ISO 7331 : 2012 | SKI-POLES FOR ALPINE SKIING - REQUIREMENTS AND TEST METHODS (ISO 7331:2011) |
| DIN EN 15311:2007-06 | THERMAL SPRAYING - COMPONENTS WITH THERMALLY SPRAYED COATINGS - TECHNICAL SUPPLY CONDITIONS |
| DIN EN ISO 9173-1:2017-03 | DENTISTRY - EXTRACTION FORCEPS - PART 1: GENERAL REQUIREMENTS (ISO 9173-1:2016) |
| DIN EN ISO 9873:2000-07 | DENTISTRY - INTRA-ORAL MIRRORS (ISO 9873:2017) |
| CEN/TS 16700:2014 | Paints and varnishes - Coating materials and coating systems for exterior wood - Assessment of resistance to impact of a coating on a wooden substrate |
| EN 10208-2:2009 | Steel pipes for pipelines for combustible fluids - Technical delivery conditions - Part 2: Pipes of requirement class B |
| DIN EN 15638:2009-07 | ICE SKATES - SAFETY REQUIREMENTS AND TEST METHODS |
| I.S. EN ISO 17078-1:2005 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 1: SIDE-POCKET MANDRELS |
| EN 10089:2002 | Hot-rolled steels for quenched and tempered springs - Technical delivery conditions |
| EN ISO 12690:2010 | Metallic and other inorganic coatings - Thermal spray coordination - Tasks and responsibilities (ISO 12690:2010) |
| DIN EN 843-4:2005-08 | Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 4: Vickers, Knoop and Rockwell superficial hardness |
| DIN ISO 10071-1:2010-11 | Tools for pressing - Ball-lock punches - Part 1: Ball-lock punches for light duty (ISO 10071-1:2008) |
| I.S. EN ISO 13533:2002 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - DRILL-THROUGH EQUIPMENT |
| DIN EN ISO 898-2:2012-08 | Mechanical properties of fasteners made of carbon steel and alloy steel - Part 2: Nuts with specified property classes - Coarse thread and fine pitch thread (ISO 898-2:2012) |
| OVE/ONORM EN 62271-202 : 2015 | HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 202: HIGH-VOLTAGE/LOW-VOLTAGE PREFABRICATED SUBSTATION (IEC 62271-202:2014) |
| ONORM EN ISO 683-17 : 2015 | HEAT-TREATED STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 17: BALL AND ROLLER BEARING STEELS (ISO 683-17:2014) |
| ISO 6508-3:2015 | Metallic materials — Rockwell hardness test — Part 3: Calibration of reference blocks |
| ISO 6508-2:2015 | Metallic materials — Rockwell hardness test — Part 2: Verification and calibration of testing machines and indenters |
| ISO/IEC Guide 99:2007 | International vocabulary of metrology Basic and general concepts and associated terms (VIM) |
| AS/NZS ISO 8124.1:2019 | Safety of toys Safety aspects related to mechanical and physical properties |
| ISO 3738-1:1982 | Hardmetals — Rockwell hardness test (scale A) — Part 1: Test method |
| ISO 18265:2013 | Metallic materials — Conversion of hardness values |
| ISO/IEC Guide 98-3:2008 | Uncertainty of measurement — Part 3: Guide to the expression of uncertainty in measurement (GUM:1995) |
| ISO 4498:2010 | Sintered metal materials, excluding hardmetals Determination of apparent hardness and microhardness |
$118.72
Including GST where applicable
AUD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - French
PDF 1 User - French
PDF 3 Users - French
PDF 5 Users - French
PDF 9 Users - French
Hardcopy - English
PDF 1 User - English
PDF 3 Users - English
PDF 5 Users - English
PDF 9 Users - English
Hardcopy - French
PDF 1 User - French
PDF 3 Users - French
PDF 5 Users - French
PDF 9 Users - French
Hardcopy - English
PDF 1 User - English
PDF 3 Users - English
PDF 5 Users - English
PDF 9 Users - English
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.