Metallic flanges Part 3: Copper alloy and composite flanges

Available format(s)

Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users

Language(s)

English, French

Published date

18-02-1988

Publisher

International Organization for Standardization

Specifies requirements for circular flanges of series 1 and 2. It also specifies the types of flanges and their facings,dimensions, tolerances, bolt sizes (including copper alloy), flange face surface finish, marking, testing, insperation and materials. An annex includes application and installation.

DevelopmentNote	Supersedes ISO 2441, 2229, 2084 (04/2001)
DocumentType	Standard
Pages	26
ProductNote	THIS STANDARD ALSO REFERS TO ANSI B 16.24
PublisherName	International Organization for Standardization
Status	Current
Supersedes	ISO 2229:1973 ISO 2084:1974

Standards	Relationship
AS/NZS 4331.3:1995	Identical
NBN EN 28659 : 1992	Identical
NBN E 29 320 : 1989	Identical
BS 4504-3.3:1989	Similar to
BS 1560-3.3:1989	Similar to

95/700349 DC : DRAFT FEB 95	DRAFT STANDARD FOR FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, CLASS DESIGNATED PT 3. COPPER ALLOY AND COMPOSITE FLANGES
BS EN ISO 4064-4:2014	Water meters for cold potable water and hot water Non-metrological requirements not covered in ISO 4064-1
17/30363953 DC : 0	BS EN 416 - GAS-FIRED OVERHEAD RADIANT TUBE HEATERS AND RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - SAFETY AND ENERGY EFFICIENCY
ISO 17602:2014	Ships and marine technology Metal valves for use in flanged pipe Face-to-face and centre-to-face dimensions
05/30134037 DC : 0	EN 12516-4 - INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 4: CALCULATION METHOD FOR VALVE SHELLS MANUFACTURED IN METALLIC MATERIALS OTHER THAN STEEL
BS EN 593:2017	Industrial valves. Metallic butterfly valves for general purposes
BS ISO 9635-1:2014	Agricultural irrigation equipment. Irrigation valves General requirements
BS EN 60534-3-2:2001	Industrial-process control valves. Dimensions Face-to-face dimensions for rotary control valves except butterfly valves
16/30345752 DC : 0	BS EN 12516-4:2014/A1 - INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 4: CALCULATION METHOD FOR VALVE SHELLS MANUFACTURED IN METALLIC MATERIALS OTHER THAN STEEL
DIN EN ISO 4064-4:2014-11	WATER METERS FOR COLD POTABLE WATER AND HOT WATER - PART 4: NON-METROLOGICAL REQUIREMENTS NOT COVERED IN ISO 4064-1 (ISO 4064-4:2014)
16/30338096 DC : 0	BS EN 303-1 - HEATING BOILERS - PART 1: HEATING BOILERS WITH FORCED DRAUGHT BURNERS - TERMINOLOGY, GENERAL REQUIREMENTS, TESTING AND MARKING
06/30139629 DC : 0	EN 777-1 - MULTI-BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - PART 1: SYSTEM D, SAFETY
04/30126822 DC : 0	EN 15092 - BUILDING VALVES - INLINE HOT WATER SUPPLY TEMPERING VALVES - TESTS AND REQUIREMENTS
07/30163662 DC : 0	BS EN 778 - DOMESTIC GAS-FIRED FORCED CONVECTION AIR HEATERS FOR SPACE HEATING NOT EXCEEDING A NET HEAT INPUT OF 70 KW, WITHOUT A FAN TO ASSIST TRANSPORTATION OF COMBUSTION AIR AND/OR COMBUSTION PRODUCTS
00/107336 DC : DRAFT OCT 2000	PREN 13959 - ANTI-POLLUTION CHECK VALVES DN 6 TO DN 250 INCLUSIVE - FAMILY E, TYPE A, B, C AND D
93/706481 DC : 0	ISO/DIS 5752 - METAL VALVES FOR USE IN FLANGED PIPE SYSTEMS - FACE-TO-FACE AND CENTRE TO FACE DIMENSIONS
API 618 : 2007 : R2016	RECIPROCATING COMPRESSORS FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES
PREN 303-1 : DRAFT 2016	HEATING BOILERS - PART 1: HEATING BOILERS WITH FORCED DRAUGHT BURNERS - TERMINOLOGY, GENERAL REQUIREMENTS, TESTING AND MARKING
17/30332894 DC : 0	BS EN 17082 - DOMESTIC AND NON-DOMESTIC GAS-FIRED FORCED CONVECTION AIR HEATERS FOR SPACE HEATING NOT EXCEEDING A NET HEAT INPUT OF 300 KW
NF EN 777-4 : 2009	MULTI-BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - PART 4: SYSTEM H - SAFETY
DIN EN 416-1:2009-09	SINGLE BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATERS FOR NON-DOMESTIC USE - PART 1: SAFETY
DIN EN 777-1:2009-09	MULTI-BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - PART 1: SYSTEM D - SAFETY
DIN EN 777-3:2009-09	MULTI-BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATER SYSTEMS FOR NON DOMESTIC USE - PART 3: SYSTEM F - SAFETY
DIN EN 777-4:2009-09	MULTI-BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - PART 4: SYSTEM H - SAFETY
BS EN 1490:2000	Building valves. Combined temperature and pressure relief valves. Tests and requirements
BS EN 13828:2003	Building valves. Manually operated copper alloy and stainless steel ball valves for potable water supply in buildings. Tests and requirements
UNE-EN 525:2010	Non-domestic direct gas-fired forced convection air heaters for space heating not exceeding a net heat input of 300 kW
BS EN 416-1:2009	Single burner gas-fired overhead radiant tube heaters for non-domestic use Safety
BS EN 1567 : 2000	BUILDING VALVES - WATER PRESSURE REDUCING VALVES AND COMBINATION WATER REDUCING VALVES - REQUIREMENTS AND TESTS
BS EN 303-5:2012	Heating boilers Heating boilers for solid fuels, manually and automatically stoked, nominal heat output of up to 500 kW. Terminology, requirements, testing and marking
BS EN 419-1:2009	Non-domestic gas-fired overhead luminous radiant heaters Safety
BS EN 1489:2000	Building valves. Pressure safety valves. Tests and requirements
ISO 4064-4:2014	Water meters for cold potable water and hot water — Part 4: Non-metrological requirements not covered in ISO 4064-1
EN 12669:2000	DIRECT GAS-FIRED HOT AIR BLOWERS FOR USE IN GREENHOUSES AND SUPPLEMENTARY NON-DOMESTIC SPACE HEATING
EN 12094-5:2006	Fixed firefighting systems - Components for gas extinguishing systems - Part 5: Requirements and test methods for high and low pressure selector valves and their actuators
DIN EN 13828:2003-12	BUILDING VALVES - MANUALLY OPERATED COPPER ALLOY AND STAINLESS STEEL BALL VALVES FOR POTABLE WATER SUPPLY IN BUILDINGS - TESTS AND REQUIREMENTS
DIN EN 14154-2:2011-06	WATER METERS - PART 2: INSTALLATION AND CONDITIONS OF USE
EN 1092-3:2003/AC:2007	FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 3: COPPER ALLOY FLANGES
EN 13443-1:2002+A1:2007	Water conditioning equipment inside buildings - Mechanical filters - Part 1: Particle rating 80 µm to 150 µm - Requirements for performances, safety and testing
DIN EN ISO 4064-2:2017-10	WATER METERS FOR COLD POTABLE WATER AND HOT WATER - PART 2: TEST METHODS (ISO 4064-2:2014)
EN 1319:2009	Domestic gas-fired forced convection air heaters for space heating, with fan-assisted burners not exceeding a net heat input of 70 kW
EN 12514-1:2000	Installations for oil supply systems for oil burners - Part 1: Safety requirements and tests - Parts, oil feed pumps, control and safety devices, supply tanks
DIN EN ISO 16330:2004-08	Reciprocating positive displacement pumps and pump units - Technical requirements (ISO 16330:2003)
05/30135987 DC : 0	EN 161 - AUTOMATIC SHUT-OFF VALVES FOR GAS BURNERS AND GAS APPLIANCES
PREN 416 : DRAFT 2017	GAS-FIRED OVERHEAD RADIANT TUBE HEATERS AND RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - SAFETY AND ENERGY EFFICIENCY
04/30031093 DC : DRAFT FEB 2004	ISO 4064-3 - MEASUREMENT OF WATER FLOW IN CLOSED FULLY CHARGED CONDUITS - METERS FOR COLD POTABLE WATER AND HOT WATER - PART 3: TEST METHODS AND EQUIPMENT
09/30202316 DC : 0	BS EN 12514-4 - PARTS FOR SUPPLY SYSTEMS FOR CONSUMING UNITS WITH LIQUID FUELS - PART 4: SAFETY REQUIREMENTS AND TESTS - PIPINGS AND PARTS WITHIN PIPELINES
I.S. EN 12514-1:2000	INSTALLATIONS FOR OIL SUPPLY SYSTEMS FOR OIL BURNERS - PART 1: SAFETY REQUIREMENTS AND TESTS - PARTS, OIL FEED PUMPS, CONTROL AND SAFETY DEVICES, SUPPLY TANKS
I.S. EN 483:2000	GAS-FIRED CENTRAL HEATING BOILERS - TYPE C BOILERS OF NOMINAL HEAT INPUT NOT EXCEEDING 70 KW
I.S. EN 13611:2015	SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
06/30148043 DC : 0	EN 88-2 - PRESSURE REGULATORS AND ASSOCIATED SAFETY DEVICES FOR GAS APPLIANCES - PART 2: PRESSURE REGULATORS FOR INLET PRESSURES ABOVE 500 MBAR UP TO AND INCLUDING 5 BAR
PREN 17175 : DRAFT 2017	GAS-FIRED OVERHEAD RADIANT STRIP HEATERS AND MULTI-BURNER CONTINUOUS RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - SAFETY AND ENERGY EFFICIENCY
I.S. EN 593:2017	INDUSTRIAL VALVES - METALLIC BUTTERFLY VALVES FOR GENERAL PURPOSES
EN 1488:2000	Building valves - Expansion groups - Tests and requirements
BS 4504-3.1:1989	Circular flanges for pipes, valves and fittings (PN designated). Steel, cast iron and copper alloy flanges Specification for steel flanges
BS ISO 10631:2013	Metallic butterfly valves for general purposes
11/30249111 DC : 0	BS EN 12516-4 - INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 4: CALCULATION METHOD FOR VALVE SHELLS MANUFACTURED IN METALLIC MATERIALS OTHER THAN STEEL
BS 7977-2:2003	Specification for safety and rational use of energy of domestic gas appliances Combined appliances. Gas fire/back boiler
07/30163658 DC : 0	BS EN 621 - NON-DOMESTIC GAS-FIRED FORCED CONVECTION AIR HEATERS FOR SPACE HEATING NOT EXCEEDING A NET HEAT INPUT OF 300 KW, WITHOUT A FAN TO ASSIST TRANSPORTATION OF COMBUSTION AIR AND/OR COMBUSTION PRODUCTS
UNE-EN ISO 4064-2:2015	Water meters for cold potable water and hot water - Part 2: Test methods (ISO 4064-2:2014)
04/30117386 DC : DRAFT JUL 2004	EN 334 - GAS PRESSURE REGULATORS FOR INLET PRESSURES UP TO 100 BAR
09/30202310 DC : 0	BS EN 12514-2 - PARTS FOR SUPPLY SYSTEMS FOR CONSUMING UNITS WITH LIQUID FUELS - PART 2: SAFETY REQUIREMENTS AND TESTS - FEED PUMPS, CONTROL AND SAFETY DEVICES, SERVICE VESSELS
PREN 303-5 : DRAFT 2010	CENTRAL-HEATING BOILERS - PART 5: HEATING BOILERS FOR SOLID FUELS, HAND AND AUTOMATICALLY STOKED, NOMINAL HEAT OUTPUT OF UP TO 500 KW - TERMINOLOGY, REQUIREMENTS, TESTING AND MARKING
NF ISO 4064-1 : 1994	MEASUREMENT OF WATER FLOW IN CLOSED CONDUITS - METERS FOR COLD POTABLE WATER - PART 1: SPECIFICATIONS
BS EN 13611:2015	Safety and control devices for burners and appliances burning gaseous and/or liquid fuels. General requirements
17/30360051 DC : 0	BS EN 13611 - SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
DIN EN 12516-4:2015-01	INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 4: CALCULATION METHOD FOR VALVE SHELLS MANUFACTURED IN METALLIC MATERIALS OTHER THAN STEEL
ASTM F 2015 : 2000	Standard Specification for Lap Joint Flange Pipe End Applications
EN 12516-4:2014	Industrial valves - Shell design strength - Part 4: Calculation method for valve shells manufactured in metallic materials other than steel
NF EN 777-2 : 2009	MULTI-BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - PART 2: SYSTEM E - SAFETY
NF EN 777-3 : 2009	MULTI-BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - PART 3: SYSTEM F - SAFETY
DIN EN 1020:2010-05	NON-DOMESTIC FORCED CONVECTION GAS-FIRED AIR HEATERS FOR SPACE HEATING NOT EXCEEDING A NET HEAT INPUT OF 300 KW INCORPORATING A FAN TO ASSIST TRANSPORTATION OF COMBUSTION AIR OR COMBUSTION PRODUCTS
DIN EN 1319:2010-06	DOMESTIC GAS-FIRED FORCED CONVECTION AIR HEATERS FOR SPACE HEATING, WITH FAN-ASSISTED BURNERS NOT EXCEEDING A NET HEAT INPUT OF 70 KW
DIN EN 303-5:2012-10	Heating boilers - Part 5: Heating boilers for solid fuels, manually and automatically stoked, nominal heat output of up to 500 kW - Terminology, requirements, testing and marking
BS EN 733:1995	End-suction centrifugal pumps, rating with 10 bar with bearing bracket. Nominal duty point, main dimensions, designation system
BS EN 13443-1:2002	Water conditioning equipment inside buildings. Mechanical filters Particle rating 80 μm to 150 μm. Requirements for performances, safety and testing
BS EN 746-2:2010	Industrial thermoprocessing equipment Safety requirements for combustion and fuel handling systems
13/30231511 DC : 0	BS ISO 13577-2 - INDUSTRIAL FURNACES AND ASSOCIATED PROCESSING EQUIPMENT - SAFETY - PART 2: COMBUSTION AND FUEL HANDLING SYSTEMS
I.S. EN 12669:2000	DIRECT GAS-FIRED HOT AIR BLOWERS FOR USE IN GREENHOUSES AND SUPPLEMENTARY NON-DOMESTIC SPACE HEATING
I.S. EN 1092-3:2003	FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 3: COPPER ALLOY FLANGES
I.S. EN 746-2:2010	INDUSTRIAL THERMOPROCESSING EQUIPMENT - PART 2: SAFETY REQUIREMENTS FOR COMBUSTION AND FUEL HANDLING SYSTEMS
DIN EN 13611:2019-06	Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - General requirements
I.S. EN 12094-5:2006	FIXED FIREFIGHTING SYSTEMS - COMPONENTS FOR GAS EXTINGUISHING SYSTEMS - PART 5: REQUIREMENTS AND TEST METHODS FOR HIGH AND LOW PRESSURE SELECTOR VALVES AND THEIR ACTUATORS
I.S. EN 303-1:2017	HEATING BOILERS - PART 1: HEATING BOILERS WITH FORCED DRAUGHT BURNERS - TERMINOLOGY, GENERAL REQUIREMENTS, TESTING AND MARKING
I.S. EN 303-5:2012	HEATING BOILERS - PART 5: HEATING BOILERS FOR SOLID FUELS, MANUALLY AND AUTOMATICALLY STOKED, NOMINAL HEAT OUTPUT OF UP TO 500 KW - TERMINOLOGY, REQUIREMENTS, TESTING AND MARKING
I.S. EN 14394:2006	HEATING BOILERS - HEATING BOILERS WITH FORCED DRAUGHT BURNERS - NOMINAL HEAT OUTPUT NOT EXCEEDING 10 MW AND MAXIMUM OPERATING TEMPERATURE OF 110 DEGREE C
I.S. EN ISO 9908:1998	TECHNICAL SPECIFICATIONS FOR CENTRIFUGAL PUMPS - CLASS 3
I.S. EN 13443-1:2002	WATER CONDITIONING EQUIPMENT INSIDE BUILDINGS - MECHANICAL FILTERS - PART 1: PARTICLE RATING 80 MICROMETER TO 150 MICROMETER - REQUIREMENTS FOR PERFORMANCES, SAFETY AND TESTING
I.S. EN ISO 5199:2002	TECHNICAL SPECIFICATIONS FOR CENTRIFUGAL PUMPS - CLASS 2
05/30138208 DC : DRAFT AUG 2005	ISO 9635-1 - AGRICULTURAL IRRIGATION EQUIPMENT - IRRIGATION VALVES - PART 1: GENERAL REQUIREMENTS
BS EN ISO 4064-2:2017	Water meters for cold potable water and hot water Test methods
BS 2782-11.1132(1992) : 1992	METHODS OF TESTING PLASTICS - THERMOPLASTICS VALVES - FATIGUE STRENGTH - TEST METHOD
12/30236280 DC : 0	BS ISO 10631 - METALLIC BUTTERFLY VALVES FOR GENERAL PURPOSES
12/30236609 DC : 0	BS EN ISO 4064-4 - WATER METERS INTENDED FOR THE METERING OF COLD POTABLE WATER AND HOT WATER - PART 4: NON-METROLOGICAL REQUIREMENTS NOT COVERED IN ISO 4064-1
UNI CEI EN ISO 4064-2 : 2014	WATER METERS FOR COLD POTABLE WATER AND HOT WATER - PART 2: TEST METHODS
PREN 12516-4 : DRAFT 2011	INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 4: CALCULATION METHOD FOR VALVE SHELLS MANUFACTURED IN METALLIC MATERIALS OTHER THAN STEEL
12/30257022 DC : 0	BS EN 13611 - SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS OR LIQUID FUELS - GENERAL REQUIREMENTS
UNI EN 303-5 : 2012	HEATING BOILERS - PART 5: HEATING BOILERS FOR SOLID FUELS, MANUALLY AND AUTOMATICALLY STOKED, NOMINAL HEAT OUTPUT OF UP TO 500 KW - TERMINOLOGY, REQUIREMENTS, TESTING AND MARKING
DIN ISO 9908:1998-04	CENTRIFUGAL PUMPS - TECHNICAL SPECIFICATIONS FOR CENTRIFUGAL PUMPS - CLASS 3
13/30271350 DC : 0	BS ISO 17602 - SHIPS AND MARINE TECHNOLOGY - METAL VALVES FOR USE IN FLANGED PIPE - FACE TO FACE AND CENTRE TO FACE DIMENSIONS
14/30283312 DC : 0	BS ISO 13577-3 - INDUSTRIAL FURNACE AND ASSOCIATED PROCESSING EQUIPMENT - SAFETY - PART 3: GENERATION AND USE OF PROTECTIVE AND REACTIVE ATMOSPHERE GASES
10/30228886 DC : 0	BS EN 303-5 - CENTRAL-HEATING BOILERS - PART 5: HEATING BOILERS FOR SOLID FUELS, HAND AND AUTOMATICALLY STOKED, NOMINAL HEAT OUTPUT OF UP TO 500 KW - TERMINOLOGY, REQUIREMENTS, TESTING AND MARKING
07/30163042 DC : DRAFT AUG 2007	BS EN 1319 - DOMESTIC GAS-FIRED FORCED CONVECTION AIR HEATERS FOR SPACE HEATING, WITH FAN-ASSISTED BURNERS NOT EXCEEDING A NET HEAT INPUT OF 70 KW
OIML R 49-2 : 2013	WATER METERS FOR COLD POTABLE WATER AND HOT WATER - PART 2: TEST METHODS
DIN EN 746-2:2011-02	Industrial thermoprocessing equipment - Part 2: Safety requirements for combustion and fuel handling systems
DIN EN 13443-1:2007-12	WATER CONDITIONING EQUIPMENT INSIDE BUILDINGS - MECHANICAL FILTERS - PART 1: PARTICLE RATING 80 [MU]M TO 150 [MU]M - REQUIREMENTS FOR PERFORMANCES, SAFETY AND TESTING
NF EN 777-1 : 2009	MULTI-BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - PART 1: SYSTEM D - SAFETY
DIN EN 14394 E : 2008	HEATING BOILERS - HEATING BOILERS WITH FORCED DRAUGHT BURNERS - NOMINAL HEAT OUTPUT NOT EXCEEDING 10 MW AND MAXIMUM OPERATING TEMPERATURE OF 110 DEGREE C
DIN EN 14394:2008-12	HEATING BOILERS - HEATING BOILERS WITH FORCED DRAUGHT BURNERS - NOMINAL HEAT OUTPUT NOT EXCEEDING 10 MW AND MAXIMUM OPERATING TEMPERATURE OF 110 DEGREE C
BS EN ISO 9905 : 1998	TECHNICAL SPECIFICATIONS FOR CENTRIFUGAL PUMPS - CLASS 1
BS EN 525:2009	Non-domestic direct gas-fired forced convection air heaters for space heating not exceeding a net heat input of 300 kW
BS EN 14154-2 : 2005	WATER METERS - PART 2: INSTALLATION AND CONDITIONS OF USE
BS EN 1020:2009	Non-domestic forced convection gas-fired air heaters for space heating not exceeding a net heat input of 300 kW incorporating a fan to assist transportation of combustion air or combustion products
UNE-EN 14154-1:2005	Water meters - Part 1: General requirements
I.S. EN 777-4:2009	MULTI-BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - PART 4: SYSTEM H - SAFETY
I.S. EN 525:2009	NON-DOMESTIC DIRECT GAS-FIRED FORCED CONVECTION AIR HEATERS FOR SPACE HEATING NOT EXCEEDING A NET HEAT INPUT OF 300 KW
I.S. EN 777-2:2009	MULTI-BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - PART 2: SYSTEM E - SAFETY
I.S. EN 416-1:2009	SINGLE BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATERS FOR NON-DOMESTIC USE - PART 1: SAFETY
I.S. EN 777-3:2009	MULTI-BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATER SYSTEMS FOR NON DOMESTIC USE - PART 3: SYSTEM F - SAFETY
I.S. EN 1319:2009	DOMESTIC GAS-FIRED FORCED CONVECTION AIR HEATERS FOR SPACE HEATING, WITH FAN-ASSISTED BURNERS NOT EXCEEDING A NET HEAT INPUT OF 70 KW
I.S. EN 419-1:2009	NON-DOMESTIC GAS-FIRED OVERHEAD LUMINOUS RADIANT HEATERS - PART 1: SAFETY
UNE-EN 14154-2:2005	Water meters - Part 2 : Installation and conditions of use
I.S. EN 621:2009	NON-DOMESTIC GAS-FIRED FORCED CONVECTION AIR HEATERS FOR SPACE HEATING NOT EXCEEDING A NET HEAT INPUT OF 300 KW, WITHOUT A FAN TO ASSIST TRANSPORTATION OF COMBUSTION AIR AND/OR COMBUSTION PRODUCTS
I.S. EN 778:2009	DOMESTIC GAS-FIRED FORCED CONVECTION AIR HEATERS FOR SPACE HEATING NOT EXCEEDING A NET HEAT INPUT OF 70 KW, WITHOUT A FAN TO ASSIST TRANSPORTATION OF COMBUSTION AIR AND/OR COMBUSTION PRODUCTS
I.S. EN 1020:2009	NON-DOMESTIC FORCED CONVECTION GAS-FIRED AIR HEATERS FOR SPACE HEATING NOT EXCEEDING A NET HEAT INPUT OF 300 KW INCORPORATING A FAN TO ASSIST TRANSPORTATION OF COMBUSTION AIR OR COMBUSTION PRODUCTS
I.S. EN 777-1:2009	MULTI-BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - PART 1: SYSTEM D - SAFETY
I.S. EN 1491:2000	BUILDING VALVES - EXPANSION VALVES - TESTS AND REQUIREMENTS
UNI EN 416-1 : 2009	SINGLE BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATERS FOR NON-DOMESTIC USE - PART 1: SAFETY
UNI EN 14394 : 2008	HEATING BOILERS - HEATING BOILERS WITH FORCED DRAUGHT BURNERS - NOMINAL HEAT OUTPUT NOT EXCEEDING 10 MW AND MAXIMUM OPERATING TEMPERATURE OF 110 DEGREES C
UNI EN 778 : 2009	DOMESTIC GAS-FIRED FORCED CONVECTION AIR HEATERS FOR SPACE HEATING NOT EXCEEDING A NET HEAT INPUT OF 70 KW, WITHOUT A FAN TO ASSIST TRANSPORTATION OF COMBUSTION AIR AND/OR COMBUSTION PRODUCTS
UNI EN 777-4 : 2009	MULTI-BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - PART 4: SYSTEM H - SAFETY
UNI EN 1020 : 2009	NON-DOMESTIC FORCED CONVECTION GAS- FIRED AIR HEATERS FOR SPACE HEATING NOT EXCEEDING A NET HEAT INPUT OF 300 KW INCORPORATING A FAN TO ASSIST TRANSPORTATION OF COMBUSTION AIR OR COMBUSTION PRODUCTS
EN 483:1999/A4:2007	GAS-FIRED CENTRAL HEATING BOILERS - TYPE C BOILERS OF NOMINAL HEAT INPUT NOT EXCEEDING 70 KW
UNI EN ISO 9905 : 2011	TECHNICAL SPECIFICATIONS FOR CENTRIFUGAL PUMPS - CLASS 1
UNI EN ISO 9908 : 2011	TECHNICAL SPECIFICATIONS FOR CENTRIFUGAL PUMPS - CLASS 3
UNI EN 14154-2 : 2011	WATER METERS - PART 2: INSTALLATION AND CONDITIONS OF USE
UNI EN 14154-1 : 2011	WATER METERS - PART 1: GENERAL REQUIREMENTS
UNI EN 746-2 : 2011	INDUSTRIAL THERMOPROCESSING EQUIPMENT - PART 2: SAFETY REQUIREMENTS FOR COMBUSTION AND FUEL HANDLING SYSTEMS
UNI EN 1319 : 2010	DOMESTIC GAS-FIRED FORCED CONVECTION AIR HEATERS FOR SPACE HEATING, WITH FAN- ASSISTED BURNERS NOT EXCEEDING A NET HEAT INPUT OF 70 KW
UNI EN 621 : 2010	NON-DOMESTIC GAS-FIRED FORCED CONVECTION AIR HEATERS FOR SPACE HEATING NOT EXCEEDING A NET HEAT INPUT OF 300 KW, WITHOUT A FAN TO ASSIST TRANSPORTATION OF COMBUSTION AIR AND/OR COMBUSTION PRODUCTS
UNI EN 525 : 2009	NON-DOMESTIC DIRECT GAS-FIRED FORCED CONVECTION AIR HEATERS FOR SPACE HEATING NOT EXCEEDING A NET HEAT INPUT OF 300 KW
UNI EN ISO 15783 : 2009	Seal-less rotodynamic pumps - Class II - Specification
UNI EN 777-1 : 2009	MULTI-BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - PART 1: SYSTEM D - SAFETY
UNI EN 777-2 : 2009	MULTI-BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - PART 2: SYSTEM E - SAFETY
UNI EN 419-1 : 2009	NON DOMESTIC GAS-FIRED OVERHEAD LUMINOUS RADIANT HEATERS - PART 1: SAFETY
UNI EN 777-3 : 2009	MULTI-BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - PART 3: SYSTEM F - SAFETY
EN 303-5:2012	Heating boilers - Part 5: Heating boilers for solid fuels, manually and automatically stoked, nominal heat output of up to 500 kW - Terminology, requirements, testing and marking
DIN EN ISO 4064-4 E : 2014	WATER METERS FOR COLD POTABLE WATER AND HOT WATER - PART 4: NON-METROLOGICAL REQUIREMENTS NOT COVERED IN ISO 4064-1 (ISO 4064-4:2014)
DIN EN 303-1:2016-07 (Draft)	HEATING BOILERS - PART 1: HEATING BOILERS WITH FORCED DRAUGHT BURNERS - TERMINOLOGY, GENERAL REQUIREMENTS, TESTING AND MARKING
CSA C900.2 : 2013	HEAT METERS - PART 2: CONSTRUCTIONAL REQUIREMENTS
BS 6448:1995	Specification for gas appliance governors of DN greater than 50 and for inlet pressures up to 200 mbar
16/30339483 DC : 0	BS EN 593 - INDUSTRIAL VALVES - METALLIC BUTTERFLY VALVES FOR GENERAL PURPOSES
07/30160488 DC : DRAFT FEB 2007	BS EN 13443-1 AMD 1 - WATER CONDITIONING EQUIPMENT INSIDE BUILDINGS - MECHANICAL FILTERS - PART 1: PARTICLE RATING 80 [MU]M TO 150 [MU]M - REQUIREMENTS FOR PERFORMANCES, SAFETY AND TESTING
05/30127266 DC : DRAFT JAN 2005	EN 1434-2 - HEAT METERS - PART 2: CONSTRUCTIONAL REQUIREMENTS
BS 7784(1994) : 1994 AMD 9864	TECHNICAL SPECIFICATIONS FOR CENTRIFUGAL PUMPS - CLASS I
I.S. EN 1488:2000	BUILDING VALVES - EXPANSION GROUPS - TESTS AND REQUIREMENTS
I.S. EN 12516-4:2014	INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 4: CALCULATION METHOD FOR VALVE SHELLS MANUFACTURED IN METALLIC MATERIALS OTHER THAN STEEL
PREN 593 : DRAFT 2016	INDUSTRIAL VALVES - METALLIC BUTTERFLY VALVES FOR GENERAL PURPOSES
BS ISO 10838-2:2000	Mechanical fittings for polyethylene piping systems for the supply of gaseous fuels Metal fittings for pipes of nominal outside diameter greater than 63mm
07/30163039 DC : DRAFT AUG 2007	BS EN 1020 - NON-DOMESTIC FORCED CONVECTION GAS-FIRED AIR HEATERS FOR SPACE HEATING NOT EXCEEDING A NET HEAT INPUT OF 300 KW INCORPORATING A FAN TO ASSIST TRANSPORTATION OF COMBUSTION AIR OR COMBUSTION PRODUCTS
09/30204183 DC : 0	BS EN 88-1 - PRESSURE REGULATORS AND ASSOCIATED SAFETY DEVICES FOR GAS APPLIANCES - PART 1: PRESSURE REGULATORS FOR INLET PRESSURES UP TO AND INCLUDING 500 MBAR
07/30163045 DC : DRAFT AUG 2007	BS EN 525 - NON-DOMESTIC DIRECT GAS-FIRED FORCED CONVECTION AIR HEATERS FOR SPACE HEATING NOT EXCEEDING A NET HEAT INPUT OF 300 KW
04/30031075 DC : DRAFT FEB 2004	ISO 4064-1 - MEASUREMENT OF WATER FLOW IN CLOSED FULLY CHARGED CONDUITS - METERS FOR COLD POTABLE WATER AND HOT WATER - PART 1: SPECIFICATIONS
UNI EN 12516-4 : 2014	INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 4: CALCULATION METHOD FOR VALVE SHELLS MANUFACTURED IN METALLIC MATERIALS OTHER THAN STEEL
I.S. EN ISO 4064-4:2014	WATER METERS FOR COLD POTABLE WATER AND HOT WATER - PART 4: NON-METROLOGICAL REQUIREMENTS NOT COVERED IN ISO 4064-1 (ISO 4064-4:2014)
API 546 : 2008	BRUSHLESS SYNCHRONOUS MACHINES - 500 KVA AND LARGER
UNE-EN 12516-4:2016	Industrial valves - Shell design strength - Part 4: Calculation method for valve shells manufactured in metallic materials other than steel
I.S. EN 60534-5:2004	INDUSTRIAL-PROCESS CONTROL VALVES - PART 5: MARKING
I.S. EN ISO 4064-2:2017	WATER METERS FOR COLD POTABLE WATER AND HOT WATER - PART 2: TEST METHODS (ISO 4064-2:2014)
DIN EN ISO 4064-2:2016-09 (Draft)	WATER METERS FOR COLD POTABLE WATER AND HOT WATER - PART 2: TEST METHODS (ISO 4064-2:2014)
ISO 10931-4:1997	Plastics piping systems for industrial applications Poly(vinylidene fluoride) (PVDF) Part 4: Valves
DIN EN 13611:2016-09	SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
17/30363959 DC : 0	BS EN 17175 - GAS-FIRED OVERHEAD RADIANT STRIP HEATERS AND MULTI-BURNER CONTINUOUS RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - SAFETY AND ENERGY EFFICIENCY
PREN 13611 : DRAFT 2017	SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
IEC 60534-3-2:2001	Industrial-process control valves - Part 3-2: Dimensions - Face-to-face dimensions for rotary control valves except butterfly valves
ISO 10838-2:2000	Mechanical fittings for polyethylene piping systems for the supply of gaseous fuels Part 2: Metal fittings for pipes of nominal outside diameter greater than 63 mm
NF EN 416-1 : 2009	SINGLE BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATERS FOR NON-DOMESTIC USE - PART 1: SAFETY
DIN EN 525:2009-11	NON-DOMESTIC DIRECT GAS-FIRED FORCED CONVECTION AIR HEATERS FOR SPACE HEATING NOT EXCEEDING A NET HEAT INPUT OF 300 KW
DIN EN 778:2010-03	DOMESTIC GAS-FIRED FORCED CONVECTION AIR HEATERS FOR SPACE HEATING NOT EXCEEDING A NET HEAT INPUT OF 70 KW, WITHOUT A FAN TO ASSIST TRANSPORTATION OF COMBUSTION AIR AND/OR COMBUSTION PRODUCTS
DIN EN 1092-3:2004-10	Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 3: Copper alloy flanges; German version EN 1092-3:2003 + AC:2004
BS EN 778:2009	Domestic gas-fired forced convection air heaters for space heating not exceeding a net heat input of 70 kW, without a fan to assist transportation of combustion air and/or combustion products
BS EN 621:2009	Non-domestic gas-fired forced convection air heaters for space heating not exceeding a net heat input of 300 kW, without a fan to assist transportation of combustion air and/or combustion products
BS EN 12669:2000	Direct gas-fired hot air blowers for use in greenhouses and supplementary non-domestic space heating
BS EN 14394 : 2005	HEATING BOILERS - HEATING BOILERS WITH FORCED DRAUGHT BURNERS - NOMINAL HEAT OUTPUT NOT EXCEEDING 10 MW AND MAXIMUM OPERATING TEMPERATURE OF 110 DEGREE C
BS EN 1759-3:2003	Flanges and their joints. Circular flanges for pipes, valves, fittings and accessories, class designated Copper alloy flanges
BS EN 1488:2000	Building valves. Expansion groups. Tests and requirements
BS EN ISO 9908 : 1998	TECHNICAL SPECIFICATIONS FOR CENTRIFUGAL PUMPS - CLASS 3
BS EN ISO 16330:2003	Reciprocating positive displacement pumps and pump units. Technical requirements
BS EN 777-2:2009	Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use System E. Safety
BS EN 656:2000	Gas-fired central heating boilers. Type B boilers of nominal heat input exceeding 70 kW, but not exceeding 300 kW
ISO 15783:2002	Seal-less rotodynamic pumps — Class II — Specification
BS EN 12094-5:2006	Fixed firefighting systems. Components for gas extinguishing systems Requirements and test methods for high and low pressure selector valves and their actuators
BS EN ISO 14847:1999	Rotary positive displacement pumps. Technical requirements
BS EN 28659:1992	Thermoplastics valves. Fatigue strength. Test method
ISO 4064-2:2014	Water meters for cold potable water and hot water Part 2: Test methods
BS EN 777-4:2009	Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use System H. Safety
BS EN 777-1:2009	Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use System D. Safety
UNE-EN 1020:2010	Non-domestic forced convection gas-fired air heaters for space heating not exceeding a net heat input of 300 kW incorporating a fan to assist transportation of combustion air or combustion products
ISO 5199:2002	Technical specifications for centrifugal pumps — Class II
BS EN 483 : 2000	GAS-FIRED CENTRAL HEATING BOILERS - TYPE C BOILERS OF NOMINAL HEAT INPUT NOT EXCEEDING 70 KW
UNE-EN ISO 4064-4:2015	Water meters for cold potable water and hot water - Part 4: Non-metrological requirements not covered in ISO 4064-1 (ISO 4064-4:2014)
BS EN 14154-1 : 2005	WATER METERS - PART 1: GENERAL REQUIREMENTS
BS EN 12514-1:2000	Installations for oil supply systems for oil burners Safety requirements and tests. Parts, oil feed pumps, control and safety devices, supply tanks
ISO 9905:1994	Technical specifications for centrifugal pumps — Class I
ISO 16330:2003	Reciprocating positive displacement pumps and pump units Technical requirements
ISO 9908:1993	Technical specifications for centrifugal pumps — Class III
BS EN 1092-3:2003	Flanges and their joints. Circular flanges for pipes, valves, fittings and accessories, PN designated Copper alloy flanges
UNE-EN 778:2010	Domestic gas-fired forced convection air heaters for space heating not exceeding a net heat input of 70 kW, without a fan to assist transportation of combustion air and/or combustion products
BS ISO 13577-2:2014	Industrial furnaces and associated processing equipment. Safety Combustion and fuel handling systems
BS EN 303-4:1999	Heating boilers. Heating boilers with forced draught burners Heating boilers with forced draught burners. Special requirements for boilers with forced draught oil burners with outputs up to 70 kW and a maximum operating pressure of 3 bar. Terminology, special requirements, testing and marking
EN 14154-2:2005+A2:2011	Water meters - Part 2: Installation and conditions of use
EN ISO 9908:1997/A1:2011	Technical specifications for centrifugal pumps - Class III - Amendment 1 (ISO 9908:1993/AMD 1:2011)
EN 621:2009	Non-domestic gas-fired forced convection air heaters for space heating not exceeding a net heat input of 300 kW, without a fan to assist transportation of combustion air and/or combustion products
EN 14394:2005+A1:2008	Heating boilers - Heating boilers with forced draught burners - Nominal heat output not exceeding 10 MW and maximum operating temperature of 110 °C
EN 777-2:2009	Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use - Part 2: System E - Safety
EN 13280:2001	Specification for glass fibre reinforced cisterns of one piece and sectional construction, for the storage, above ground, of cold water
EN ISO 4064-2:2017	Water meters for cold potable water and hot water - Part 2: Test methods (ISO 4064-2:2014)
EN 525:2009	Non-domestic direct gas-fired forced convection air heaters for space heating not exceeding a net heat input of 300 kW
EN ISO 9905:1997/A1:2011	Technical specifications for centrifugal pumps - Class I - Amendment 1 (ISO 9905:1994/AMD 1:2011)
EN 13828:2003	Building valves - Manually operated copper alloy and stainless steel ball valves for potable water supply in buildings -Tests and requirements
EN 1489:2000	Building valves - Pressure safety valves - Tests and requirements
EN 733:1995	End-suction centrifugal pumps, rating with 10 bar with bearing bracket - Nominal duty point, main dimensions, designation system
EN ISO 16330 : 2003	RECIPROCATING POSITIVE DISPLACEMENT PUMPS AND PUMP UNITS - TECHNICAL REQUIREMENTS
EN 746-2:2010	Industrial thermoprocessing equipment - Part 2: Safety requirements for combustion and fuel handling systems
EN ISO 5199 : 2002	TECHNICAL SPECIFICATIONS FOR CENTRIFUGAL PUMPS - CLASS 2
EN 28659:1990	Thermoplastics valves - Fatigue strength - Test method (ISO 8659:1989)
EN 778:2009	Domestic gas-fired forced convection air heaters for space heating not exceeding a net heat input of 70 kW, without a fan to assist transportation of combustion air and/or combustion products
EN 1567:1999	Building valves - Water pressure reducing valves and combination water pressure reducing valves - Requirements and tests
EN 416-1:2009	Single burner gas-fired overhead radiant tube heaters for non-domestic use - Part 1: Safety
EN 1491:2000	Building valves - Expansion valves - Tests and requirements
EN 656:1999/A1:2006	GAS-FIRED CENTRAL HEATING BOILERS - TYPE B BOILERS OF NOMINAL HEAT INPUT EXCEEDING 70 KW BUT NOT EXCEEDING 300 KW
EN 1490:2000	Building valves - Combined temperature and pressure relief valves - Tests and requirements
EN 419-1:2009	Non-domestic gas-fired overhead luminous radiant heaters - Part 1: Safety
EN 777-1:2009	Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use - Part 1: System D - Safety
EN ISO 15783:2003/A1:2008	Seal-less rotodynamic pumps - Class II - Specification - Amendment 1 (ISO 15783:2003/Amd 1:2008)
EN 303-1:2017	Heating boilers - Part 1: Heating boilers with forced draught burners - Terminology, general requirements, testing and marking
EN 1759-3:2003/AC:2004	FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, CLASS DESIGNATED - PART 3: COPPER ALLOY FLANGES
EN 777-3:2009	Multi-burner gas-fired overhead radiant tube heater systems for non domestic use - Part 3: System F - Safety
EN 593:2017	Industrial valves - Metallic butterfly valves for general purposes
EN 777-4:2009	Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use - Part 4: System H - Safety
EN 303-4:1999	Heating boilers - Part 4: Heating boilers with forced draught burners - Special requirements for boilers with forced draught oil burners with outputs up to 70 kW and a maximum operating pressure of 3 bar - Terminology, special requirements, testing and marking
UNI EN 656 : 2008	GAS-FIRED CENTRAL HEATING BOILERS - TYPE B BOILERS OF NOMINAL HEAT INPUT EXCEEDING 70 KW, BUT NOT EXCEEDING 300 KW
API 618 : 2007	RECIPROCATING COMPRESSORS FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES
UNI CEI EN ISO 4064-4 : 2014	Water meters for cold potable water and hot water - Part 4: Non-metrological requirements not covered in ISO 4064-1
13/30271601 DC : 0	BS ISO 9635-1 - AGRICULTURAL IRRIGATION EQUIPMENT - IRRIGATION VALVES - PART 1: GENERAL REQUIREMENTS
00/705373 DC : DRAFT FEB 2000	PREN 13836 - GAS-FIRED CENTRAL HEATING BOILERS - TYPE B BOILERS OF NOMINAL HEAT INPUT EXCEEDING 300 KW BUT NOT EXCEEDING 1000 KW
BS ISO 17602:2014	Ships and marine technology. Metal valves for use in flanged pipe. Face-to-face and centre-to-face dimensions
06/30139635 DC : 0	EN 777-2 - MULTI-BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - PART 2: SYSTEM E, SAFETY
BS 7736(1994) : 1994 AMD 9865	TECHNICAL SPECIFICATIONS FOR CENTRIFUGAL PUMPS - CLASS III
06/30139641 DC : 0	EN 777-3 - MULTI-BURNER GAS-FORED OVERHEAD RADIANT TUBE HEATER SYSTEMS FOR NON DOMESTIC USE - PART 3: SYSTEM F - SAFETY
BS EN 12516-4 : 2014	INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 4: CALCULATION METHOD FOR VALVE SHELLS MANUFACTURED IN METALLIC MATERIALS OTHER THAN STEEL
ISO 10385-1:2000	Measurement of water flow in closed conduits Meters for hot water Part 1: Specifications
ISO 9635-1:2014	Agricultural irrigation equipment Irrigation valves Part 1: General requirements
ONORM EN 303-5 : 2012	HEATING BOILERS - PART 5: HEATING BOILERS FOR SOLID FUELS, MANUALLY AND AUTOMATICALLY STOKED, NOMINAL HEAT OUTPUT OF UP TO 500 KW - TERMINOLOGY, REQUIREMENTS, TESTING AND MARKING
UNE-EN 13611:2016	Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - General requirements
ISO 10631:2013	Metallic butterfly valves for general purposes
EN 13611:2015/AC:2016	SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
ASTM F 2015 : 2000 : R2006	Standard Specification for Lap Joint Flange Pipe End Applications
ASTM F 2015 : 2000 : R2013	Standard Specification for Lap Joint Flange Pipe End Applications
ISO 13577-2:2014	Industrial furnaces and associated processing equipment — Safety — Part 2: Combustion and fuel handling systems
NF EN 419-1 : 2009	NON-DOMESTIC GAS-FIRED OVERHEAD LUMINOUS RADIANT HEATERS - PART 1: SAFETY
DIN EN 777-2:2009-09	MULTI-BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - PART 2: SYSTEM E - SAFETY
DIN EN 419-1:2009-07	NON-DOMESTIC GAS-FIRED OVERHEAD LUMINOUS RADIANT HEATERS - PART 1: SAFETY
DIN EN 1759-3:2004-10	Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, Class designated - Part 3: Copper alloy flanges; German version EN 1759-3:2003 + AC:2004
BS EN ISO 5199:2002	Technical specifications for centrifugal pumps. Class II
BS EN ISO 15783 : 2003	SEAL-LESS ROTODYNAMIC PUMPS - CLASS 2 - SPECIFICATION
BS EN 1491:2000	Building valves. Expansion valves. Tests and requirements
BS EN 1319:2009	Domestic gas-fired forced convection air heaters for space heating, with fan-assisted burners not exceeding a net heat input of 70 kW
BS EN 777-3:2009	Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use System F. Safety
UNE-EN 303-5:2013	Heating boilers - Part 5: Heating boilers for solid fuels, manually and automatically stoked, nominal heat output of up to 500 kW - Terminology, requirements, testing and marking
BS EN 303-1:2017	Heating boilers Heating boilers with forced draught burners. Terminology, general requirements, testing and marking
DIN EN 12514-1:2009-06 (Draft)	INSTALLATIONS FOR OIL SUPPLY SYSTEMS FOR OIL BURNERS - PART 1: SAFETY REQUIREMENTS AND TESTS - PARTS, OIL FEED PUMPS, CONTROL AND SAFETY DEVICES, SUPPLY TANKS
DIN EN 621:2010-04	NON-DOMESTIC GAS-FIRED FORCED CONVECTION AIR HEATERS FOR SPACE HEATING NOT EXCEEDING A NET HEAT INPUT OF 300 KW, WITHOUT A FAN TO ASSIST TRANSPORTATION OF COMBUSTION AIR AND/OR COMBUSTION PRODUCTS
EN 1020:2009	Non-domestic forced convection gas-fired air heaters for space heating not exceeding a net heat input of 300 kW incorporating a fan to assist transportation of combustion air or combustion products
DIN EN ISO 5199:2003-12	TECHNICAL SPECIFICATIONS FOR CENTRIFUGAL PUMPS - CLASS 2
EN 14154-1:2005+A2:2011	Water meters - Part 1: General requirements
I.S. EN 13611:2015/AC:2016	SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
DIN EN 14154-1:2011-06	WATER METERS - PART 1: GENERAL REQUIREMENTS
EN 60534-3-2:2001	Industrial-process control valves - Part 3-2: Dimensions - Face-to-face dimensions for rotary control valves except butterfly valves
DIN EN ISO 15783:2010-04	Seal-less rotodynamic pumps - Class II - Specification (ISO 15783:2002 + Amd.1:2008) (includes Amendment A1:2008)