ISO 7250-1:2017
Current
Current
The latest, up-to-date edition.
Basic human body measurements for technological design — Part 1: Body measurement definitions and landmarks
Available format(s)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
English, French
Published date
11-08-2017
ISO 7250-1:2017 provides a description of anthropometric measurements which can be used as a basis for comparison of population groups and for the creation of anthropometric databases (see ISO 15535). The basic list of measurements specified in this document is intended to serve as a guide for ergonomists who are required to define population groups and apply their knowledge to the geometric design of the places where people work and live. In addition, the list serves as a basis for extracting one- and two-dimensional measurements from three-dimensional scans (specified in ISO 20685). It serves as a guide on how to take anthropometric measurements, but also gives information to the ergonomist and designer on the anatomical and anthropometrical bases and principles of measurement which are applied in the solution of design tasks.
ISO 7250-1:2017 is intended to be used in conjunction with national or international regulations or agreements to ensure harmony in defining population groups and to allow comparison of anthropometric data among member bodies. In its various applications, it is anticipated that the basic list will be supplemented by specific additional measurements. Annex A shows the correspondence of dimensions described here with their use in ISO 14738 and ISO 15534.
| Committee |
ISO/TC 159/SC 3
|
| DevelopmentNote |
Supersedes ISO 7250. (02/2008) Supersedes ISO/DIS 7250-1. (08/2017)
|
| DocumentType |
Standard
|
| Pages |
51
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| NF EN ISO 7250-1 : 2017 | Identical |
| SS-EN ISO 7250-1 : 2017 | Identical |
| EN ISO 7250-1:2017 | Identical |
| PN EN ISO 7250-1 : 2017 | Identical |
| BS EN ISO 7250-1:2017 | Identical |
| AS/NZS 4024:2019 Series | Identical |
| IS 13214 : Part 1 : 2020 | Identical |
| UNE-EN ISO 7250-1:2010 | Identical |
| DIN EN ISO 7250-1:2010-06 | Identical |
| DIN EN ISO 7250-1:2017-12 | Identical |
| AS/NZS 4024.1701:2019 | Identical |
| UNI EN ISO 7250-1 : 2017 | Identical |
| DIN EN ISO 7250-1:2016-05 (Draft) | Identical |
| NEN EN ISO 7250-1 : 2017 | Identical |
| UNI EN ISO 7250-1 : 2010 | Identical |
| I.S. EN ISO 7250-1:2017 | Identical |
| SN EN ISO 7250-1 : 2018 | Identical |
| ONORM EN ISO 7250-1 : 2018 | Identical |
| UNE-EN ISO 7250-1:2017 | Identical |
| BIS IS 13214-1 : 2015 | Identical |
| NS EN ISO 7250-1 : 2017 | Identical |
| NEN ISO 7250-1 : 2008 | Identical |
| GOST R ISO 7250-1 : 2013 | Identical |
| NBN EN ISO 7250-1 : 2010 | Identical |
| ISO 7250-3:2015 | Basic human body measurements for technological design — Part 3: Worldwide and regional design ranges for use in product standards |
| DIN EN ISO/IEC 25063:2017-09 | SYSTEMS AND SOFTWARE ENGINEERING - SYSTEMS AND SOFTWARE PRODUCT QUALITY REQUIREMENTS AND EVALUATION (SQUARE) - COMMON INDUSTRY FORMAT (CIF) FOR USABILITY: CONTEXT OF USE DESCRIPTION (ISO/IEC 25063:2014) |
| ISO 24496:2017 | Office furniture Office chairs Methods for the determination of dimensions |
| BS ISO 20685-2 : 2015 | ERGONOMICS - 3-D SCANNING METHODOLOGIES FOR INTERNATIONALLY COMPATIBLE ANTHROPOMETRIC DATABASES - PART 2: EVALUATION PROTOCOL OF SURFACE SHAPE AND REPEATABILITY OF RELATIVE LANDMARK POSITIONS |
| DIN EN ISO 16093:2014-03 (Draft) | MACHINE TOOLS - SAFETY - SAWING MACHINES FOR COLD METAL (ISO 16093:2017) |
| BS PD CEN ISO/TR 7250-2 : 2011 | BASIC HUMAN BODY MEASUREMENTS FOR TECHNOLOGICAL DESIGN - PART 2: STATISTICAL SUMMARIES OF BODY MEASUREMENTS FROM NATIONAL POPULATIONS |
| BS ISO 8559-1:2017 | Size designation of clothes Anthropometric definitions for body measurement |
| 14/30292314 DC : 0 | BS ISO 20685-2 - 3-D SCANNING METHODOLOGIES FOR INTERNATIONALLY COMPATIBLE ANTHROPOMETRIC DATABASES - PART 2: EVALUATION PROTOCOL OF SURFACE SHAPE AND REPEATABILITY OF RELATIVE LANDMARK POSITIONS |
| EN 16282-7:2017 | Equipment for commercial kitchens - Components for ventilation in commercial kitchens - Part 7: Installation and use of fixed fire suppression systems |
| 14/30303741 DC : 0 | BS EN 16282-1 - EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION OF COMMERCIAL KITCHENS - PART 1: GENERAL REQUIREMENTS INCLUDING CALCULATION METHOD |
| DIN EN ISO 20685-2:2016-08 (Draft) | ERGONOMICS - 3-D SCANNING METHODOLOGIES FOR INTERNATIONALLY COMPATIBLE ANTHROPOMETRIC DATABASES - PART 2: EVALUATION PROTOCOL OF SURFACE SHAPE AND REPEATABILITY OF RELATIVE LANDMARK POSITIONS (ISO 20685-2:2015) |
| DIN EN ISO 16093 E : 2017 | MACHINE TOOLS - SAFETY - SAWING MACHINES FOR COLD METAL (ISO 16093:2017) |
| DIN EN 894-4:2010-11 | Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 4: Location and arrangement of displays and control actuators |
| BS ISO 7250-3:2015 | Basic human body measurements for technological design Worldwide and regional design ranges for use in product standards |
| 11/30212367 DC : 0 | BS EN ISO 13482 - ROBOTS AND ROBOTIC DEVICES - SAFETY REQUIREMENTS FOR NON-INDUSTRIAL ROBOTS - NON-MEDICAL PERSONAL CARE ROBOT |
| I.S. EN ISO/IEC 25063:2017 | SYSTEMS AND SOFTWARE ENGINEERING - SYSTEMS AND SOFTWARE PRODUCT QUALITY REQUIREMENTS AND EVALUATION (SQUARE) - COMMON INDUSTRY FORMAT (CIF) FOR USABILITY: CONTEXT OF USE DESCRIPTION (ISO/IEC 25063:2014) |
| S.R. CEN ISO/TR 7250-2:2011 | BASIC HUMAN BODY MEASUREMENTS FOR TECHNOLOGICAL DESIGN - PART 2: STATISTICAL SUMMARIES OF BODY MEASUREMENTS FROM INDIVIDUAL ISO POPULATIONS (ISO/TR 7250-2:2010) |
| I.S. EN 16282-2:2016 | EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION IN COMMERCIAL KITCHENS - PART 2: KITCHEN VENTILATION HOODS - DESIGN AND SAFETY REQUIREMENTS |
| PREN 16282-1 : DRAFT 2014 | EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION OF COMMERCIAL KITCHENS - PART 1: GENERAL REQUIREMENTS INCLUDING CALCULATION METHOD |
| UNI CEN ISO/TR 7250-2 : 2011 | BASIC HUMAN BODY MEASUREMENTS FOR TECHNOLOGICAL DESIGN - PART 2: STATISTICAL SUMMARIES OF BODY MEASUREMENTS FROM INDIVIDUAL ISO POPULATIONS |
| ISO 11064-4:2013 | Ergonomic design of control centres — Part 4: Layout and dimensions of workstations |
| ISO/TR 7250-2:2010 | Basic human body measurements for technological design — Part 2: Statistical summaries of body measurements from national populations |
| BS EN ISO 20685:2010 | 3-D scanning methodologies for internationally compatible anthropometric databases |
| BS EN 13861:2011 | Safety of machinery. Guidance for the application of ergonomics standards in the design of machinery |
| BS ISO/IEC 25063 : 2014 | SYSTEMS AND SOFTWARE ENGINEERING - SYSTEMS AND SOFTWARE PRODUCT QUALITY REQUIREMENTS AND EVALUATION (SQUARE) - COMMON INDUSTRY FORMAT (CIF) FOR USABILITY: CONTEXT OF USE DESCRIPTION |
| UNE-EN ISO 16093:2017 | Machine tools - Safety - Sawing machines for cold metal (ISO 16093:2017) |
| ISO 8559-1:2017 | Size designation of clothes Part 1: Anthropometric definitions for body measurement |
| BS EN ISO 12836:2015 | Dentistry. Digitizing devices for CAD/CAM systems for indirect dental restorations. Test methods for assessing accuracy |
| BS EN 16282-8:2017 | Equipment for commercial kitchens. Components for ventilation in commercial kitchens Installations for treatment of aerosol. Requirements and testing |
| DIN EN ISO 12836:2015-11 | DENTISTRY - DIGITIZING DEVICES FOR CAD/CAM SYSTEMS FOR INDIRECT DENTAL RESTORATIONS - TEST METHODS FOR ASSESSING ACCURACY (ISO 12836:2015) |
| 12/30233126 DC : DRAFT JULY 2012 | BS ISO 15535 - GENERAL REQUIREMENTS FOR ESTABLISHING ANTHROPOMETRIC DATABASES |
| ISO/TS 16976-2:2015 | Respiratory protective devices — Human factors — Part 2: Anthropometrics |
| I.S. EN ISO 20685-2:2017 | ERGONOMICS - 3-D SCANNING METHODOLOGIES FOR INTERNATIONALLY COMPATIBLE ANTHROPOMETRIC DATABASES - PART 2: EVALUATION PROTOCOL OF SURFACE SHAPE AND REPEATABILITY OF RELATIVE LANDMARK POSITIONS (ISO 20685-2:2015) |
| EN 16282-1:2017 | Equipment for commercial kitchens - Components for ventilation in commercial kitchens - Part 1: General requirements including calculation method |
| I.S. EN 16282-5:2017 | EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION IN COMMERCIAL KITCHENS - PART 5: AIR DUCT - DESIGN AND DIMENSIONING |
| ISO/TR 22100-3:2016 | Safety of machinery Relationship with ISO 12100 Part 3: Implementation of ergonomic principles in safety standards |
| UNE-EN 16282-4:2017 | Equipment for commercial kitchens - Components for ventilation in commercial kitchens - Part 4: Air inlets and outlets; Design and safety requirements |
| DIN EN ISO 20685 E : 2010 | 3-D SCANNING METHODOLOGIES FOR INTERNATIONALLY COMPATIBLE ANTHROPOMETRIC DATABASES |
| DIN EN ISO 11064-4 E : 2014 | ERGONOMIC DESIGN OF CONTROL CENTRES - PART 4: LAYOUT AND DIMENSIONS OF WORKSTATIONS (ISO 11064-4:2013) |
| ISO/IEC 25063:2014 | Systems and software engineering — Systems and software product Quality Requirements and Evaluation (SQuaRE) — Common Industry Format (CIF) for usability: Context of use description |
| I.S. EN ISO 20685:2010 | 3-D SCANNING METHODOLOGIES FOR INTERNATIONALLY COMPATIBLE ANTHROPOMETRIC DATABASES |
| I.S. EN 13861:2011 | SAFETY OF MACHINERY - GUIDANCE FOR THE APPLICATION OF ERGONOMICS STANDARDS IN THE DESIGN OF MACHINERY |
| I.S. EN ISO 11064-4:2013 | ERGONOMIC DESIGN OF CONTROL CENTRES - PART 4: LAYOUT AND DIMENSIONS OF WORKSTATIONS (ISO 11064-4:2013) |
| DIN EN ISO 16093:2017-10 | Machine tools - Safety - Sawing machines for cold metal (ISO 16093:2017) |
| VDI 4499 Blatt 4:2015-03 | Digital factory - Ergonomic representation of humans in the digital factory |
| BS EN 894-4:2010 | Safety of machinery. Ergonomics requirements for design of displays and control actuators Location and arrangement of displays and control actuators |
| PD ISO/TR 22100-3:2016 | Safety of machinery. Relationship with ISO 12100 Implementation of ergonomic principles in safety standards |
| BS EN 16282-5:2017 | Equipment for commercial kitchens. Components for ventilation in commercial kitchens Air duct. Design and dimensioning |
| BS EN 16282-4:2016 | Equipment for commercial kitchens. Components for ventilation in commercial kitchens Air inlets and outlets; design and safety requirements |
| DIN EN ISO/IEC 25063 E : 2017 | SYSTEMS AND SOFTWARE ENGINEERING - SYSTEMS AND SOFTWARE PRODUCT QUALITY REQUIREMENTS AND EVALUATION (SQUARE) - COMMON INDUSTRY FORMAT (CIF) FOR USABILITY: CONTEXT OF USE DESCRIPTION (ISO/IEC 25063:2014) |
| 11/30215664 DC : 0 | BS EN ISO 11064-4 - ERGONOMIC DESIGN OF CONTROL CENTRES - PART 4: LAYOUT AND DIMENSIONS OF WORKSTATIONS |
| 14/30263884 DC : 0 | BS EN ISO 16093 - MACHINE TOOLS - SAFETY - SAWING MACHINES FOR COLD METAL |
| BS ISO 24496:2017 | Office furniture. Office chairs. Methods for the determination of dimensions |
| DIN EN 894-4 E : 2010 | SAFETY OF MACHINERY - ERGONOMICS REQUIREMENTS FOR THE DESIGN OF DISPLAYS AND CONTROL ACTUATORS - PART 4: LOCATION AND ARRANGEMENT OF DISPLAYS AND CONTROL ACTUATORS |
| UNE-EN 16282-2:2017 | Equipment for commercial kitchens - Components for ventilation in commercial kitchens - Part 2: Kitchen ventilation hoods; design and safety requirements |
| PD ISO/TS 16976-2:2015 | Respiratory protective devices — Human factors Part 2: Anthropometrics |
| SAE ARP 6390 : 2016 | LOCATION OF CREW AND PASSENGER OXYGEN MASKS, PORTABLE OXYGEN SYSTEM, AND PROTECTIVE BREATHING EQUIPMENT |
| I.S. EN 16282-1:2017 | EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION IN COMMERCIAL KITCHENS - PART 1: GENERAL REQUIREMENTS INCLUDING CALCULATION METHOD |
| UNE-EN 16282-3:2017 | Equipment for commercial kitchens - Components for ventilation in commercial kitchens - Part 3: Kitchen ventilation ceilings; Design and safety requirements |
| I.S. EN 16282-3:2016 | EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION IN COMMERCIAL KITCHENS - PART 3: KITCHEN VENTILATION CEILINGS - DESIGN AND SAFETY REQUIREMENTS |
| DIN EN 13861:2012-01 | Safety of machinery - Guidance for the application of ergonomics standards in the design of machinery |
| EN ISO 16093:2017 | Machine tools - Safety - Sawing machines for cold metal (ISO 16093:2017) |
| UNI EN ISO 11064-4 : 2014 | ERGONOMIC DESIGN OF CONTROL CENTRES - PART 4: LAYOUT AND DIMENSIONS OF WORKSTATIONS |
| UNI EN 13861 : 2011 | SAFETY OF MACHINERY - GUIDANCE FOR THE APPLICATION OF ERGONOMICS STANDARDS IN THE DESIGN OF MACHINERY |
| EN 894-4:2010 | Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 4: Location and arrangement of displays and control actuators |
| UNI EN ISO 20685 : 2010 | 3-D SCANNING METHODOLOGIES FOR INTERNATIONALLY COMPATIBLE ANTHROPOMETRIC DATABASES |
| UNI EN ISO 15535 : 2013 | GENERAL REQUIREMENTS FOR ESTABLISHING ANTHROPOMETRIC DATABASES |
| BS EN ISO 20685-2:2017 | Ergonomics. 3-D scanning methodologies for internationally compatible anthropometric databases Evaluation protocol of surface shape and repeatability of relative landmark positions |
| I.S. EN 16282-8:2017 | EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION IN COMMERCIAL KITCHENS - PART 8: INSTALLATIONS FOR TREATMENT OF AEROSOL - REQUIREMENTS AND TESTING |
| BS EN ISO/IEC 25063:2017 | Systems and software engineering. Systems and software product Quality Requirements and Evaluation (SQuaRE). Common Industry Format (CIF) for usability: Context of use description |
| BS EN 16282-3:2016 | Equipment for commercial kitchens. Components for ventilation in commercial kitchens Kitchen ventilation ceilings; design and safety requirements |
| PD ISO/TR 24496:2012 | Office furniture. Office work chairs. Methods for the determination of dimensions |
| BS EN ISO 16093:2017 | Machine tools. Safety. Sawing machines for cold metal |
| 14/30287632 DC : 0 | BS EN ISO 12836:2012/AMD 1 - DENTISTRY - DIGITIZING DEVICES FOR CAD/CAM SYSTEMS FOR INDIRECT DENTAL RESTORATIONS - TEST METHODS FOR ASSESSING ACCURACY |
| BS EN 16282-1:2017 | Equipment for commercial kitchens. Components for ventilation in commercial kitchens General requirements including calculation method |
| I.S. EN 894-4:2010 | SAFETY OF MACHINERY - ERGONOMICS REQUIREMENTS FOR THE DESIGN OF DISPLAYS AND CONTROL ACTUATORS - PART 4: LOCATION AND ARRANGEMENT OF DISPLAYS AND CONTROL ACTUATORS |
| I.S. EN 16282-7:2017 | EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION IN COMMERCIAL KITCHENS - PART 7: INSTALLATION AND USE OF FIXED FIRE SUPPRESSION SYSTEMS |
| I.S. EN 16282-4:2016 | EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION IN COMMERCIAL KITCHENS - PART 4: AIR INLETS AND OUTLETS - DESIGN AND SAFETY REQUIREMENTS |
| BS EN ISO 17776:2016 | Petroleum and natural gas industries. Offshore production installations. Major Accident hazard management during the design of new installations |
| ISO 15535:2012 | General requirements for establishing anthropometric databases |
| BS EN ISO 15535:2012 | General requirements for establishing anthropometric databases |
| ISO 20685:2010 | 3-D scanning methodologies for internationally compatible anthropometric databases |
| BS EN ISO 11064-4:2013 | Ergonomic design of control centres Layout and dimensions of workstations |
| ISO 16093:2017 | Machine tools — Safety — Sawing machines for cold metal |
| ISO 12836:2015 | Dentistry Digitizing devices for CAD/CAM systems for indirect dental restorations Test methods for assessing accuracy |
| DIN EN ISO 11064-4:2014-03 | Ergonomic design of control centres - Part 4: Layout and dimensions of workstations (ISO 11064-4:2013) |
| EN 13861:2011 | Safety of machinery - Guidance for the application of ergonomics standards in the design of machinery |
| EN 16282-5:2017 | Equipment for commercial kitchens - Components for ventilation in commercial kitchens - Part 5: Air duct; Design and dimensioning |
| EN ISO 20685-2:2017 | Ergonomics - 3-D scanning methodologies for internationally compatible anthropometric databases - Part 2: Evaluation protocol of surface shape and repeatability of relative landmark positions (ISO 20685-2:2015) |
| EN ISO 20685:2010 | 3-D scanning methodologies for internationally compatible anthropometric databases (ISO 20685:2010) |
| EN ISO 12836:2015 | Dentistry - Digitizing devices for CAD/CAM systems for indirect dental restorations - Test methods for assessing accuracy (ISO 12836:2015) |
| EN ISO 17776:2016 | Petroleum and natural gas industries - Offshore production installations - Major Accident hazard management during the design of new installations (ISO 17776:2016) |
| EN ISO/IEC 25063:2017 | Systems and software engineering - Systems and software product Quality Requirements and Evaluation (SQuaRE) - Common Industry Format (CIF) for usability: Context of use description (ISO/IEC 25063:2014) |
| EN ISO 15535:2012 | General requirements for establishing anthropometric databases (ISO 15535:2012) |
| EN ISO 11064-4:2013 | Ergonomic design of control centres - Part 4: Layout and dimensions of workstations (ISO 11064-4:2013) |
| EN 16282-8:2017 | Equipment for commercial kitchens - Components for ventilation in commercial kitchens - Part 8: Installations for treatment of aerosol; Requirements and testing |
| UNI EN 894-4 : 2010 | SAFETY OF MACHINERY - ERGONOMICS REQUIREMENTS FOR THE DESIGN OF DISPLAYS AND CONTROL ACTUATORS - PART 4: LOCATION AND ARRANGEMENT OF DISPLAYS AND CONTROL ACTUATORS |
| DIN EN ISO 20685-2 E : 2017 | ERGONOMICS - 3-D SCANNING METHODOLOGIES FOR INTERNATIONALLY COMPATIBLE ANTHROPOMETRIC DATABASES - PART 2: EVALUATION PROTOCOL OF SURFACE SHAPE AND REPEATABILITY OF RELATIVE LANDMARK POSITIONS (ISO 20685-2:2015) |
| 11/30244192 DC : 0 | BS EN 16282-1 - EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION OF COMMERCIAL KITCHENS - PART 1: GENERAL REQUIREMENTS INCLUDING CALCULATION METHOD |
| DD ISO/TS 16976-2:2010 | Respiratory protective devices. Human factors Anthropometrics |
| BS PD ISO/TR 7250-2 : 2010 | BASIC HUMAN BODY MEASUREMENTS FOR TECHNOLOGICAL DESIGN - PART 2: STATISTICAL SUMMARIES OF BODY MEASUREMENTS FROM INDIVIDUAL ISO POPULATIONS |
| BS EN 16282-7:2017 | Equipment for commercial kitchens. Components for ventilation in commercial kitchens Installation and use of fixed fire suppression systems |
| 14/30292341 DC : 0 | BS ISO 7250-3 - BASIC HUMAN BODY MEASUREMENTS FOR TECHNOLOGICAL DESIGN - PART 3: WORLDWIDE AND REGIONAL DESIGN VALUES FOR USE IN ISO PRODUCT STANDARDS |
| ISO/TR 24496:2012 | Office furniture Office work chairs Methods for the determination of dimensions |
| I.S. EN ISO 12836:2015 | DENTISTRY - DIGITIZING DEVICES FOR CAD/CAM SYSTEMS FOR INDIRECT DENTAL RESTORATIONS - TEST METHODS FOR ASSESSING ACCURACY (ISO 12836:2015) |
| I.S. EN ISO 16093:2017 | MACHINE TOOLS - SAFETY - SAWING MACHINES FOR COLD METAL (ISO 16093:2017) |
| 17/30364325 DC : 0 | BS EN 1009-4 - MACHINES FOR MECHANICAL PROCESSING OF MINERALS AND SIMILAR SOLID MATERIALS - SAFETY - PART 4: SPECIFIC REQUIREMENTS FOR SCREENING MACHINERY |
| ISO 20685-2:2015 | Ergonomics — 3-D scanning methodologies for internationally compatible anthropometric databases — Part 2: Evaluation protocol of surface shape and repeatability of relative landmark positions |
| DIN EN ISO 15535:2013-01 | General requirements for establishing anthropometric databases (ISO 15535:2012) |
| CEN ISO/TR 7250-2:2011/A1:2013 | BASIC HUMAN BODY MEASUREMENTS FOR TECHNOLOGICAL DESIGN - PART 2: STATISTICAL SUMMARIES OF BODY MEASUREMENTS FROM NATIONAL POPULATIONS (ISO/TR 7250-2:2010/AMD 1:2013) |
| DIN EN ISO 20685:2010-11 | 3-D SCANNING METHODOLOGIES FOR INTERNATIONALLY COMPATIBLE ANTHROPOMETRIC DATABASES |
| ISO 14738:2002 | Safety of machinery — Anthropometric requirements for the design of workstations at machinery |
| ISO 20685:2010 | 3-D scanning methodologies for internationally compatible anthropometric databases |
| ISO 15535:2012 | General requirements for establishing anthropometric databases |
$365.60
Including GST where applicable
AUD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - English
PDF 1 User - English
PDF 3 Users - English
PDF 5 Users - English
PDF 9 Users - English
Hardcopy - French
PDF 1 User - French
PDF 3 Users - French
PDF 5 Users - French
PDF 9 Users - French
Hardcopy - English
PDF 1 User - English
PDF 3 Users - English
PDF 5 Users - English
PDF 9 Users - English
Hardcopy - French
PDF 1 User - French
PDF 3 Users - French
PDF 5 Users - French
PDF 9 Users - French
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.