Customer Support: 131 242

  • There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

ISO 9142:2003

Current
Current

The latest, up-to-date edition.

Adhesives Guide to the selection of standard laboratory ageing conditions for testing bonded joints
Available format(s)

Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users

Language(s)

English, French

Published date

04-12-2003

ISO 9142:2003 describes laboratory ageing conditions under which adhesive joints may be exposed to various environmental influences -- climatic or chemical -- for the purpose of assessing the effects of such influences on certain properties.

The ageing conditions are applicable to bonded assemblies and may be used to constitute a set of tests for the evaluation of an adhesive.

The results obtained using the procedures described in this International Standard are not necessarily applicable to the determination of the service life of a bonded assembly because there is no direct relation between the test results and the behaviour of a bonded assembly over a period of time under service conditions. However, for certain specific applications, experience with the procedures may enable a correlation to be established.

DevelopmentNote
Supersedes ISO/DIS 9142 (12/2003)
DocumentType
Standard
Pages
24
PublisherName
International Organization for Standardization
Status
Current
Supersedes

ISO 26842-1:2013 Adhesives Test methods for the evaluation and selection of adhesives for indoor wood products Part 1: Resistance to delamination in non-severe environments
PREN 1372 : DRAFT 2014 ADHESIVES - TEST METHOD FOR ADHESIVES FOR FLOOR AND WALL COVERINGS - PEEL TEST
10/30229682 DC : 0 BS ISO 26842-2 - ADHESIVES - TEST METHODS FOR THE EVALUATION AND SELECTION OF ADHESIVES FOR INDOOR WOOD PRODUCTS - PART 2: RESISTANCE TO DELAMINATION IN SEVERE ENVIRONMENTS
PREN 14276-2 : DRAFT 2017 PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 2: PIPING - GENERAL REQUIREMENTS
PREN 1373 : DRAFT 2014 ADHESIVES - TEST METHOD FOR ADHESIVES FOR FLOOR AND WALL COVERINGS - SHEAR TEST
DIN EN 14258 E : 2005 STRUCTURAL ADHESIVES - MECHANICAL BEHAVIOUR OF BONDED JOINTS SUBJECTED TO SHORT AND LONG TERMS EXPOSURE AT SPECIFIED CONDITIONS OF TEMPERATURE
DIN EN 13415:2010-05 TEST OF ADHESIVE FOR FLOOR COVERING - DETERMINATION OF THE ELECTRICAL RESISTANCE OF ADHESIVE FILMS AND COMPOSITES
UNE-EN 1373:2015 Adhesives - Test method for adhesives for floor and wall coverings - Shear test
UNE-EN 1372:2015 Adhesives - Test method for adhesives for floor and wall coverings - Peel test
BS EN 14444:2005 Structural adhesives. Qualitative assessment of durability of bonded assemblies. Wedge rupture test
BS EN 14258:2004 Structural adhesives. Mechanical behaviour of bonded joints subjected to short and long terms exposure at specified conditions of temperature
EN 13415:2010 Test of adhesives for floor covering - Determination of the electrical resistance of adhesive films and composites
CEN/TS 15534-1:2007 Wood-plastics composites (WPC) - Part 1: Test methods for characterisation of WPC materials and products
DIN EN 14258:2005-02 Structural adhesives - Mechanical behaviour of bonded joints subjected to short and long terms exposure at specified conditions of temperature
DIN EN ISO 4611:2011-04 Plastics - Determination of the effects of exposure to damp heat, water spray and salt mist (ISO 4611:2010)
05/30131014 DC : DRAFT MAR 2005 EN 15190 - STRUCTURAL ADHESIVES - TEST METHODS FOR ASSESSING LONG TERM DURABILITY OF BONDED METALLIC STRUCTURES
10/30229679 DC : 0 BS ISO 26842-1 - ADHESIVES - TEST METHODS FOR THE EVALUATION AND SELECTION OF ADHESIVES FOR INDOOR WOOD PRODUCTS - PART 1: RESISTANCE TO DELAMINATION IN NON-SEVERE ENVIRONMENTS
BS ISO 14615:1997 Adhesives. Durability of structural adhesive joints. Exposure to humidity and temperature under load
BS ISO 26842-1:2013 Adhesives. Test methods for the evaluation and selection of adhesives for indoor wood products Resistance to delamination in non-severe environments
PREN ISO 4611 : DRAFT 2010 PLASTICS - DETERMINATION OF THE EFFECTS OF EXPOSURE TO DAMP HEAT, WATER SPRAY AND SALT MIST
14/30296759 DC : 0 BS EN 1903 - ADHESIVES - TEST METHOD FOR ADHESIVES FOR PLASTIC OR RUBBER FLOOR COVERINGS OR WALL COVERINGS - DETERMINATION OF DIMENSIONAL CHANGES AFTER ACCELERATED AGEING
BS ISO 17194:2007 Structural adhesives. A standard database of properties
07/30151497 DC : 0 ISO 26842 - ADHESIVES - GUIDELINES FOR THE SELECTION OF ADHESIVES FOR INDOOR WOOD PRODUCTS BY DURABILITY TESTING
BS ISO 26842-2:2013 Adhesives. Test methods for the evaluation and selection of adhesives for indoor wood products Resistance to delamination in severe environments
08/30180281 DC : DRAFT JUNE 2008 BS EN 1966 - STRUCTURAL ADHESIVES - CHARACTERIZATION OF A SURFACE BY MEASURING ADHESION BY MEANS OF THE THREE POINT BENDING METHOD
08/19979365 DC : DRAFT FEB 2008 BS ISO 15928-3 - HOUSES - DESCRIPTION OF PERFORMANCE - PART 3: STRUCTURAL DURABILITY
DD CEN/TS 15534-1:2007 Wood-plastics composites (WPC) Test methods for characterisation of WPC materials and products
ISO 14679:1997 Adhesives — Measurement of adhesion characteristics by a three-point bending method
BS EN ISO 9653:2000 Adhesives. Test method for shear strength of adhesive bonds
DIN EN 15274:2015-06 GENERAL PURPOSE ADHESIVES FOR STRUCTURAL ASSEMBLY - REQUIREMENTS AND TEST METHODS
UNE-EN 13415:2010 Test of adhesives for floor covering - Determination of the electrical resistance of adhesive films and composites
BS EN 1967:2002 Structural adhesives. Evaluation of the effectiveness of surface treatment techniques for aluminium using a wet peel test in association with the floating roller method
I.S. EN ISO 4611:2010 PLASTICS - DETERMINATION OF THE EFFECTS OF EXPOSURE TO DAMP HEAT, WATER SPRAY AND SALT MIST
DIN EN 1903:2015-07 ADHESIVES - TEST METHOD FOR ADHESIVES FOR PLASTIC OR RUBBER FLOOR COVERINGS OR WALL COVERINGS - DETERMINATION OF DIMENSIONAL CHANGES AFTER ACCELERATED AGEING
I.S. EN 1966:2009 STRUCTURAL ADHESIVES - CHARACTERIZATION OF A SURFACE BY MEASURING ADHESION BY MEANS OF THE THREE POINT BENDING METHOD
I.S. EN 15274:2015 GENERAL PURPOSE ADHESIVES FOR STRUCTURAL ASSEMBLY - REQUIREMENTS AND TEST METHODS
ISO 15107:1998 Adhesives Determination of cleavage strength of bonded joints
10/30206257 DC : 0 BS EN ISO 4611 - PLASTICS - DETERMINATION OF THE EFFECTS OF EXPOSURE TO DAMP HEAT, WATER SPRAY AND SALT MIST
14/30300568 DC : 0 BS EN 15274 - GENERAL PURPOSE ADHESIVES FOR STRUCTURAL ASSEMBLY - REQUIREMENTS AND TEST METHODS
04/30122412 DC : DRAFT SEP 2004 ISO 17194 - STRUCTURAL ADHESIVES - STANDARD DATABASE OF PROPERTIES
ISO 4578:1997 Adhesives — Determination of peel resistance of high-strength adhesive bonds — Floating-roller method
ISO 17194:2007 Structural adhesives A standard database of properties
DIN EN 1372:2015-06 ADHESIVES - TEST METHOD FOR ADHESIVES FOR FLOOR AND WALL COVERINGS - PEEL TEST
DIN EN 1373:2015-06 ADHESIVES - TEST METHOD FOR ADHESIVES FOR FLOOR AND WALL COVERINGS - SHEAR TEST
DIN EN 1966:2009-07 STRUCTURAL ADHESIVES - CHARACTERIZATION OF A SURFACE BY MEASURING ADHESION BY MEANS OF THE THREE POINT BENDING METHOD
DIN EN 15274 E : 2015 GENERAL PURPOSE ADHESIVES FOR STRUCTURAL ASSEMBLY - REQUIREMENTS AND TEST METHODS
EN 14493 : 2002 STRUCTURAL ADHESIVES - DETERMINATION OF DYNAMIC RESISTANCE TO CLEAVAGE OF HIGH STRENGTH ADHESIVE BONDS UNDER IMPACT CONDITIONS - WEDGE IMPACT METHOD
UNI EN ISO 4611 : 2011 PLASTICS - DETERMINATION OF THE EFFECTS OF EXPOSURE TO DAMP HEAT, WATER SPRAY AND SALT MIST
EN ISO 4611:2010 Plastics - Determination of the effects of exposure to damp heat, water spray and salt mist (ISO 4611:2010)
UNI EN 13415 : 2010 TEST OF ADHESIVES FOR FLOOR COVERING - DETERMINATION OF THE ELECTRICAL RESISTANCE OF ADHESIVE FILMS AND COMPOSITES
UNI EN 1966 : 2009 STRUCTURAL ADHESIVES - CHARACTERIZATION OF A SURFACE BY MEASURING ADHESION BY MEANS OF THE THREE POINT BENDING METHOD
14/30296753 DC : 0 BS EN 1372 - ADHESIVES - TEST METHOD FOR ADHESIVES FOR FLOOR AND WALL COVERINGS - PEEL TEST
I.S. EN ISO 9653:2000 ADHESIVES - TEST METHOD FOR SHEAR IMPACT STRENGTH OF ADHESIVE BONDS
ISO 26842-2:2013 Adhesives Test methods for the evaluation and selection of adhesives for indoor wood products Part 2: Resistance to delamination in severe environments
14/30296750 DC : 0 BS EN 1373 - ADHESIVES - TEST METHOD FOR ADHESIVES FOR FLOOR AND WALL COVERINGS - SHEAR TEST
07/30167352 DC : DRAFT AUG 2007 BS EN 13415 - TEST OF ADHESIVES FOR FLOOR COVERING - DETERMINATION OF THE ELECTRICAL RESISTANCE OF ADHESIVE FILMS AND COMPOSITES
PREN 15274 : DRAFT 2014 GENERAL PURPOSE ADHESIVES FOR STRUCTURAL ASSEMBLY - REQUIREMENTS AND TEST METHODS
ISO 15928-3:2015 Houses Description of performance Part 3: Structural durability
ISO 14676:1997 Adhesives — Evaluation of the effectiveness of surface treatment techniques for aluminium — Wet-peel test by floating-roller method
PREN 1903 : DRAFT 2014 ADHESIVES - TEST METHOD FOR ADHESIVES FOR PLASTIC OR RUBBER FLOOR COVERINGS OR WALL COVERINGS - DETERMINATION OF DIMENSIONAL CHANGES AFTER ACCELERATED AGEING
17/30351221 DC : 0 BS EN 14276-2 - PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 2: PIPING - GENERAL REQUIREMENTS
S.R. CEN TS 15534-3:2007 WOOD-PLASTICS COMPOSITES (WPC) - PART 3: CHARACTERISATION OF WPC PRODUCTS
UNE-EN 1903:2015 Adhesives - Test method for adhesives for plastic or rubber floor coverings or wall coverings - Determination of dimensional changes after accelerated ageing
DIN EN 15190 E : 2007 STRUCTURAL ADHESIVES - TEST METHODS FOR ASSESSING LONG TERM DURABILITY OF BONDED METALLIC STRUCTURES
BS EN 1903:2015 Adhesives. Test method for adhesives for plastic or rubber floor coverings or wall coverings. Determination of dimensional changes after accelerated ageing
BS EN 1373:2015 Adhesives. Test method for adhesives for floor and wall coverings. Shear test
BS EN 14493:2002 Structural adhesives. Determination of dynamic resistance to cleavage of high strength adhesive bonds under impact conditions. Wedge impact method
UNE-EN 15274:2015 General purpose adhesives for structural assembly - Requirements and test methods
I.S. EN 1372:2015 ADHESIVES - TEST METHOD FOR ADHESIVES FOR FLOOR AND WALL COVERINGS - PEEL TEST
ISO 4611:2010 Plastics Determination of the effects of exposure to damp heat, water spray and salt mist
I.S. EN 13415:2010 TEST OF ADHESIVES FOR FLOOR COVERING - DETERMINATION OF THE ELECTRICAL RESISTANCE OF ADHESIVE FILMS AND COMPOSITES
ISO 9653:1998 Adhesives Test method for shear impact strength of adhesive bonds
BS EN 1372:2015 Adhesives. Test method for adhesives for floor and wall coverings. Peel test
BS EN 1966:2009 Structural adhesives. Characterization of a surface by measuring adhesion by means of the three point bending method
I.S. EN 1373:2015 ADHESIVES - TEST METHOD FOR ADHESIVES FOR FLOOR AND WALL COVERINGS - SHEAR TEST
BS EN 14173:2002 Structural adhesives. T-peel test for flexible-to-flexible bonded assemblies
I.S. EN 1903:2015 ADHESIVES - TEST METHOD FOR ADHESIVES FOR PLASTIC OR RUBBER FLOOR COVERINGS OR WALL COVERINGS - DETERMINATION OF DIMENSIONAL CHANGES AFTER ACCELERATED AGEING
EN 15190:2007 Structural adhesives - Test methods for assessing long term durability of bonded metallic structures
EN 15274:2015 General purpose adhesives for structural assembly - Requirements and test methods
EN 1372:2015 Adhesives - Test method for adhesives for floor and wall coverings - Peel test
EN 1903:2015 ADHESIVES - TEST METHOD FOR ADHESIVES FOR PLASTIC OR RUBBER FLOOR COVERINGS OR WALL COVERINGS - DETERMINATION OF DIMENSIONAL CHANGES AFTER ACCELERATED AGEING
EN 14173 : 2002 STRUCTURAL ADHESIVES - T-PEEL TEST FOR FLEXIBLE-TO-FLEXIBLE BONDED ASSEMBLIES
EN 1967:2002/AC:2005 STRUCTURAL ADHESIVES - EVALUATION OF THE EFFECTIVENESS OF SURFACE TREATMENT TECHNIQUES FOR ALUMINIUM USING A WET PEEL TEST IN ASSOCIATION WITH THE FLOATING ROLLER METHOD
EN 14258:2004 Structural adhesives - Mechanical behaviour of bonded joints subjected to short and long terms exposure at specified conditions of temperature
EN 1373:2015 Adhesives - Test method for adhesives for floor and wall coverings - Shear test
EN 14444:2005/AC:2008 Structural adhesives - Qualitative assessment of durability of bonded assemblies - Wedge rupture test (ISO 10354:1992 modified)
EN ISO 9653 : 2000 Adhesives - Test method for shear impact strength of adhesive bonds (ISO 9653:1998)
EN 1966:2009 Structural adhesives - Characterization of a surface by measuring adhesion by means of the three point bending method
I.S. EN 14493:2002 STRUCTURAL ADHESIVES - DETERMINATION OF DYNAMIC RESISTANCE TO CLEAVAGE OF HIGH STRENGTH ADHESIVE BONDS UNDER IMPACT CONDITIONS - WEDGE IMPACT METHOD
DD CEN/TS 15534-3:2007 Wood-plastics composites (WPC) Characterisation of WPC products
DIN EN 14444 E : 2006 STRUCTURAL ADHESIVES - QUALITATIVE ASSESSMENT OF DURABILITY OF BONDED ASSEMBLIES - WEDGE RUPTURE TEST
S.R. CEN TS 15534-1:2007 WOOD-PLASTICS COMPOSITES (WPC) - PART 1: TEST METHODS FOR CHARACTERISATION OF WPC MATERIALS AND PRODUCTS
BS EN 13415:2002 Adhesives. Test of adhesives for floor coverings. Determination of the electrical resistance of adhesive films
BS EN 15274:2015 General purpose adhesives for structural assembly. Requirements and test methods
BS EN ISO 4611:2010 Plastics. Determination of the effects of exposure to damp heat, water spray and salt mist
BS EN 15190:2007 Structural adhesives. Test methods for assessing long term durability of bonded metallic structures
CEN/TS 15534-3:2007 Wood-plastics composites (WPC) - Part 3: Characterisation of WPC products
DIN EN 15190:2007-10 Structural adhesives - Test methods for assessing long term durability of bonded metallic structures
DIN EN 14444:2006-01 Structural adhesives - Qualitative assessment of durability of bonded assemblies - Wedge rupture test (ISO 10354:1992 modified)

ISO 4892-1:2016 Plastics Methods of exposure to laboratory light sources Part 1: General guidance
ISO 483:2005 Plastics — Small enclosures for conditioning and testing using aqueous solutions to maintain the humidity at a constant value
EN ISO 4892-1:2016 Plastics - Methods of exposure to laboratory light sources - Part 1: General guidance (ISO 4892-1:2016)
EN ISO 4892-3:2016 Plastics - Methods of exposure to laboratory light sources - Part 3: Fluorescent UV lamps (ISO 4892-3:2016)
ISO 3205:1976 Preferred test temperatures
ISO 4588:1995 Adhesives Guidelines for the surface preparation of metals
ISO 4587:2003 Adhesives Determination of tensile lap-shear strength of rigid-to-rigid bonded assemblies
ISO 4892-3:2016 Plastics Methods of exposure to laboratory light sources Part 3: Fluorescent UV lamps
ISO 175:2010 Plastics Methods of test for the determination of the effects of immersion in liquid chemicals
ISO 6238:2001 Adhesives Wood-to-wood adhesive bonds Determination of shear strength by compressive loading
EN ISO 483:2005 Plastics - Small enclosures for conditioning and testing using aqueous solutions to maintain the humidity at a constant value (ISO 483:2005)
ISO 291:2008 Plastics Standard atmospheres for conditioning and testing
EN ISO 291:2008 Plastics - Standard atmospheres for conditioning and testing (ISO 291:2008)
ISO 9227:2017 Corrosion tests in artificial atmospheres — Salt spray tests
ISO 4892-2:2013 Plastics — Methods of exposure to laboratory light sources — Part 2: Xenon-arc lamps
EN ISO 4892-2:2013 Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps (ISO 4892-2:2013)
EN ISO 175:2010 Plastics - Methods of test for the determination of the effects of immersion in liquid chemicals (ISO 175:2010)

View more information
$243.10
Including GST where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Need help?
Call us on 131 242, then click here to start a Screen Sharing session
so we can help right away! Learn more