|
ASTM D 6362 : 1998 : R2003
|
Standard Practice for Certificates of Reference Materials for Water Analysis |
|
FD ISO GUIDE 34 : 2010 FD
|
GENERAL REQUIREMENTS FOR THE COMPETENCE OF REFERENCE MATERIAL PRODUCERS |
|
PD ISO/TR 16476:2016
|
REFERENCE MATERIALS - ESTABLISHING AND EXPRESSING METROLOGICAL TRACEABILITY OF QUANTITY VALUES ASSIGNED TO REFERENCE MATERIALS |
|
PD 6532-5:1997
|
REFERENCE MATERIALS - QUALITY SYSTEM GUIDELINES FOR THE PRODUCTION OF REFERENCE MATERIALS |
|
OIML D 18 : 2008
|
THE USE OF CERTIFIED REFERENCE MATERIALS IN FIELDS COVERED BY METROLOGICAL CONTROL EXERCISED BY NATIONAL SERVICES OF LEGAL METROLOGY. BASIC PRINCIPLES |
|
BS ISO 14606:2015
|
Surface chemical analysis. Sputter depth profiling. Optimization using layered systems as reference materials |
|
15/30327269 DC : 0
|
BS EN ISO 17034 - GENERAL REQUIREMENTS FOR THE COMPETENCE OF REFERENCE MATERIAL PRODUCERS |
|
NF EN ISO 15351 : 2010
|
STEEL AND IRON - DETERMINATION OF NITROGEN CONTENT - THERMAL CONDUCTIMETRIC METHOD AFTER FUSION IN A CURRENT OF INERT GAS (ROUTINE METHOD) |
|
06/30159593 DC : 0
|
BS ISO/IEC 15457-3 - IDENTIFICATION CARDS - THIN FLEXIBLE CARDS - PART 3: TEST METHODS |
|
08/30182372 DC : DRAFT JULY 2008
|
BS EN 15842 - FOODSTUFFS - DETECTION OF FOOD ALLERGENS - GENERAL CONSIDERATIONS AND VALIDATION OF METHODS |
|
ASTM D 6596 : 2000 : R2005
|
Standard Practice for Ampulization and Storage of Gasoline and Related Hydrocarbon Materials |
|
ASTM D 6362 : 1998 : R2013
|
Standard Practice for Certificates of Reference Materials for Water Analysis |
|
ASTM E 2437 : 2005
|
Standard Practice for Designing and Validating Performance-Based Test Methods for the Analysis of Metals, Ores, and Related Materials (Withdrawn 2014) |
|
PREN 3976 : 200P1
|
AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TEST METHOD - CHEMICAL ANALYSIS FOR THE DETERMINATION OF HYDROGEN CONTENT |
|
CEI UNI 70099 : 2010
|
INTERNATIONAL VOCABULARY OF METROLOGY - BASIC AND GENERAL CONCEPTS AND ASSOCIATED TERMS (VIM) |
|
CEI UNI EN ISO/IEC 17025 : 2008
|
GENERAL REQUIREMENTS FOR THE COMPETENCE OF TESTING AND CALIBRATION LABORATORIES |
|
ASTM E 1834 : 2011
|
Standard Test Method for Analysis of Nickel Alloys by Graphite Furnace Atomic Absorption Spectrometry |
|
ASTM E 2594 : 2009
|
Standard Test Method for Analysis of Nickel Alloys by Inductively Coupled Plasma Atomic Emission Spectrometry (Performance-Based Method) |
|
I.S. EN ISO 15194:2009
|
IN VITRO DIAGNOSTIC MEDICAL DEVICES - MEASUREMENT OF QUANTITIES IN SAMPLES OF BIOLOGICAL ORIGIN - REQUIREMENTS FOR CERTIFIED REFERENCE MATERIALS AND THE CONTENT OF SUPPORTING DOCUMENTATION |
|
ASTM E 2594 : 2009 : R2014
|
Standard Test Method for Analysis of Nickel Alloys by Inductively Coupled Plasma Atomic Emission Spectrometry (Performance-Based Method) |
|
ASTM E 2371 : 2013
|
Standard Test Method for Analysis of Titanium and Titanium Alloys by Direct Current Plasma and Inductively Coupled Plasma Atomic Emission Spectrometry (Performance-Based Test Methodology) |
|
ISO/IEC 17025:2017
|
General requirements for the competence of testing and calibration laboratories |
|
ASTM C 1128 : 2018 : REDLINE
|
Standard Guide for Preparation of Working Reference Materials for Use in Analysis of Nuclear Fuel Cycle Materials |
|
DIN EN ISO 6974-2 E : 2012
|
NATURAL GAS - DETERMINATION OF COMPOSITION AND ASSOCIATED UNCERTAINTY BY GAS CHROMATOGRAPHY - PART 2: UNCERTAINTY CALCULATIONS (ISO 6974-2:2012) |
|
DIN EN ISO 10993-12 E : 2012
|
BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 12: SAMPLE PREPARATION AND REFERENCE MATERIALS (ISO 10993-12:2012) |
|
ISO 6974-1:2012
|
Natural gas — Determination of composition and associated uncertainty by gas chromatography — Part 1: General guidelines and calculation of composition |
|
BS EN ISO 10993-12:2012
|
BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 12: SAMPLE PREPARATION AND REFERENCE MATERIALS |
|
BS EN ISO 14111:1999
|
NATURAL GAS - GUIDELINES TO TRACEABILITY IN ANALYSIS |
|
EN 12287 : 1999
|
IN VITRO DIAGNOSTIC MEDICAL DEVICES - MEASUREMENT OF QUANTITIES IN SAMPLES OF BIOLOGICAL ORIGIN - DESCRIPTION OF REFERENCE MATERIALS |
|
DIN ISO 6141:2004-05
|
GAS ANALYSIS - REQUIREMENTS FOR CERTIFICATES FOR CALIBRATION GASES AND GAS MIXTURES |
|
DIN EN ISO 148-3:2017-04
|
METALLIC MATERIALS - CHARPY PENDULUM IMPACT TEST - PART 3: PREPARATION AND CHARACTERIZATION OF CHARPY V-NOTCH TEST PIECES FOR INDIRECT VERIFICATION OF PENDULUM IMPACT MACHINES (ISO 148-3:2016) |
|
EN ISO 148-3:2016
|
Metallic materials - Charpy pendulum impact test - Part 3: Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines (ISO 148-3:2016) |
|
UNI EN ISO 10993-12 : 2012
|
BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 12: SAMPLE PREPARATION AND REFERENCE MATERIALS |
|
ASTM E 1724 : 1995
|
Standard Guide for Testing and Certification of Metal and Metal-Related Reference Materials |
|
10/30215322 DC : 0
|
BS EN ISO 6974-1 - NATURAL GAS - DETERMINATION OF COMPOSITION AND ASSOCIATED UNCERTAINTY BY GAS CHROMATOGRAPHY - PART 1: GENERAL GUIDELINES AND CALCULATION OF COMPOSITION |
|
ASTM D 6596:2000
|
Standard Practice for Ampulization and Storage of Gasoline and Related Hydrocarbon Materials |
|
BS EN ISO 148-3:2016
|
Metallic materials. Charpy pendulum impact test Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines |
|
UNI EN 15842 : 2010
|
FOODSTUFFS - DETECTION OF FOOD ALLERGENS - GENERAL CONSIDERATIONS AND VALIDATION OF METHODS |
|
13/30285580 DC : 0
|
BS EN ISO 16961 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - INTERNAL PROTECTIVE COATING AND LINING OF ABOVE GROUND STEEL STORAGE TANKS |
|
10/30203803 DC : 0
|
BS ISO 6974-2 - NATURAL GAS - DETERMINATION OF COMPOSITION AND ASSOCIATED UNCERTAINTY BY GAS CHROMATOGRAPHY - PART 2: UNCERTAINTY CALCULATIONS |
|
OIML V 2-200 : 2012
|
INTERNATIONAL VOCABULARY OF METROLOGY - BASIC AND GENERAL CONCEPTS AND ASSOCIATED TERMS (VIM) |
|
UNI CEN/TR 10317 : 2009
|
EUROPEAN CERTIFIED REFERENCE MATERIALS (EURONORM-CRMS) FOR THE DETERMINATION OF THE CHEMICAL COMPOSITION OF IRON AND STEEL PRODUCTS PREPARED UNDER THE AUSPICES OF THE EUROPEAN COMMITTEE FOR IRON AND STEEL STANDARDIZATION |
|
ISO Guide 32:1997
|
Calibration in analytical chemistry and use of certified reference materials |
|
DIN EN 15842:2010-06
|
FOODSTUFFS - DETECTION OF FOOD ALLERGENS - GENERAL CONSIDERATIONS AND VALIDATION OF METHODS |
|
PD ISO GUIDE 35:2017
|
Reference materials. Guidance for characterization and assessment of homogeneity and stability |
|
DIN EN ISO 15351:2010-08
|
Steel and iron - Determination of nitrogen content - Thermal conductimetric method after fusion in a current of inert gas (Routine method) (ISO 15351:1999) |
|
07/30157023 DC : 0
|
BS EN ISO 15194 - IN VITRO DIAGNOSTIC MEDICAL DEVICES - MEASUREMENT OF QUANTITIES IN SAMPLES OF BIOLOGICAL ORIGIN - REQUIREMENTS FOR CERTIFIED REFERENCE MATERIALS AND THE CONTENT OF SUPPORTING DOCUMENTATION |
|
I.S. EN ISO 17034:2016
|
GENERAL REQUIREMENTS FOR THE COMPETENCE OF REFERENCE MATERIAL PRODUCERS (ISO 17034:2016) |
|
ASTM D 6596 : 2000 : R2016
|
Standard Practice for Ampulization and Storage of Gasoline and Related Hydrocarbon Materials |
|
BS EN ISO/IEC 17025:2017
|
General requirements for the competence of testing and calibration laboratories |
|
NF EN 15842 : 2010
|
FOODSTUFFS - DETECTION OF FOOD ALLERGENS - GENERAL CONSIDERATIONS AND VALIDATION OF METHODS |
|
ASTM D 6362 : 1998 : R2008
|
Standard Practice for Certificates of Reference Materials for Water Analysis |
|
I.S. EN ISO 148-3:2016
|
METALLIC MATERIALS - CHARPY PENDULUM IMPACT TEST - PART 3: PREPARATION AND CHARACTERIZATION OF CHARPY V-NOTCH TEST PIECES FOR INDIRECT VERIFICATION OF PENDULUM IMPACT MACHINES (ISO 148-3:2016) |
|
I.S. EN 14726:2005
|
ALUMINIUM AND ALUMINIUM ALLOYS - CHEMICAL ANALYSIS - GUIDELINE FOR SPARK OPTICAL EMISSION SPECTROMETRIC ANALYSIS |
|
DIN EN ISO 10993-12:2012-10
|
Biological evaluation of medical devices - Part 12: Sample preparation and reference materials (ISO 10993-12:2012) |
|
DIN EN ISO 6974-1:2012-11
|
Natural gas - Determination of composition and associated uncertainty by gas chromatography - Part 1: General guidelines and calculation of composition (ISO 6974-1:2012) |
|
UNE-EN 196-2:2014
|
Method of testing cement - Part 2: Chemical analysis of cement |
|
I.S. EN ISO 6974-1:2012
|
NATURAL GAS - DETERMINATION OF COMPOSITION AND ASSOCIATED UNCERTAINTY BY GAS CHROMATOGRAPHY - PART 1: GENERAL GUIDELINES AND CALCULATION OF COMPOSITION (ISO 6974-1:2012) |
|
I.S. EN ISO 10723:2012
|
NATURAL GAS - PERFORMANCE EVALUATION FOR ANALYTICAL SYSTEMS (ISO 10723:2012) |
|
I.S. EN ISO 6974-2:2012
|
NATURAL GAS - DETERMINATION OF COMPOSITION AND ASSOCIATED UNCERTAINTY BY GAS CHROMATOGRAPHY - PART 2: UNCERTAINTY CALCULATIONS (ISO 6974-2:2012) |
|
DIN EN ISO 10723:2013-04
|
NATURAL GAS - PERFORMANCE EVALUATION FOR ANALYTICAL SYSTEMS (ISO 10723:2012) |
|
I.S. EN ISO 10993-8:2000
|
BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 8: SELECTION AND QUALIFICATION OF REFERENCE MATERIALS FOR BIOLOGICAL TESTS |
|
I.S. EN ISO 10993-12:2012
|
BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 12: SAMPLE PREPARATION AND REFERENCE MATERIALS (ISO 10993-12:2012) |
|
I.S. EN 196-2:2013
|
METHODS OF TESTING CEMENT - PART 2: CHEMICAL ANALYSIS OF CEMENT |
|
DIN EN 196-2:2013-10
|
METHODS OF TESTING CEMENT - PART 2: CHEMICAL ANALYSIS OF CEMENT |
|
PD 6532-3:2000
|
REFERENCE MATERIALS - GUIDE TO THE CONTENTS OF CERTIFICATES OF REFERENCE MATERIALS - GUIDE TO THE USES OF CERTIFIED REFERENCE MATERIALS |
|
BS 4559-4(2000) : 2000 AMD 16907
|
METHODS FOR PREPARATION OF CALIBRATION GAS MIXTURES - CERTIFICATE OF MIXTURE PREPARATION |
|
BS 0-3:1997
|
A STANDARD FOR STANDARDS - PART 3: SPECIFICATION FOR STRUCTURE, DRAFTING AND PRESENTATION |
|
PD 6532-5:2000
|
REFERENCE MATERIALS - GUIDE TO THE CONTENTS OF CERTIFICATES OF REFERENCE MATERIALS - GENERAL REQUIREMENTS FOR THE COMPETENCE OF REFERENCE MATERIAL PRODUCERS |
|
DIN EN ISO 148-3:2015-09 (Draft)
|
METALLIC MATERIALS - CHARPY PENDULUM IMPACT TEST - PART 3: PREPARATION AND CHARACTERIZATION OF CHARPY V-NOTCH TEST PIECES FOR INDIRECT VERIFICATION OF PENDULUM IMPACT MACHINES (ISO 148-3:2016) |
|
BS 7825-1:1995
|
CALIBRATION OF RUBBER AND PLASTICS TEST EQUIPMENT - SPECIFICATION FOR PRINCIPLES AND GENERAL REQUIREMENTS |
|
BS ISO 29581-2:2010
|
CEMENT - TEST METHODS - PART 2: CHEMICAL ANALYSIS BY X-RAY FLUORESCENCE |
|
UNE-EN ISO 17034:2017
|
General requirements for the competence of reference material producers (ISO 17034:2016) |
|
DIN EN 15842 E : 2010
|
FOODSTUFFS - DETECTION OF FOOD ALLERGENS - GENERAL CONSIDERATIONS AND VALIDATION OF METHODS |
|
DIN ISO 6141 E : 2004
|
GAS ANALYSIS - REQUIREMENTS FOR CERTIFICATES FOR CALIBRATION GASES AND GAS MIXTURES |
|
03/317065 DC : DRAFT NOV 2003
|
ISO/IEC 17025 - GENERAL REQUIREMENTS FOR THE COMPETENCE OF TESTING AND CALIBRATION LABS - AMENDMENT 1 |
|
BS EN ISO 15194:2009
|
In vitro diagnostic medical devices. Measurement of quantities in samples of biological origin. Requirements for certified reference materials and the content of supporting documentation |
|
UNE-ISO/IEC GUIA 99:2012 IN
|
International vocabulary of metrology. Basics and general concepts and associated terms (VIM) |
|
BS EN ISO 15351:2010
|
Steel and iron. Determination of nitrogen content. Thermal conductimetric method after fusion in a current of inert gas (Routine method) |
|
PD ISO/TS 14411-1:2017
|
PREPARATION OF PARTICULATE REFERENCE MATERIALS - PART 1: POLYDISPERSE MATERIAL BASED ON PICKET FENCE OF MONODISPERSE SPHERICAL PARTICLES |
|
03/105598 DC : DRAFT MAY 2003
|
BS ISO 18899 - RUBBER - GUIDE TO THE CALIBRATION OF TEST EQUIPMENT |
|
PD CEN/TR 10317:2014
|
EUROPEAN CERTIFIED REFERENCE MATERIALS (EURONORM-CRMS) FOR THE DETERMINATION OF THE CHEMICAL COMPOSITION OF IRON AND STEEL PRODUCTS PREPARED UNDER THE AUSPICES OF THE EUROPEAN COMMITTEE FOR IRON AND STEEL STANDARDIZATION (ECISS) |
|
BIS IS/ISO/IEC 17025 : 2005 AMD 1
|
GENERAL REQUIREMENTS FOR THE COMPETENCE OF TESTING AND CALIBRATION LABORATORIES |
|
14/30296672 DC : 0
|
BS ISO GUIDE 33 - REFERENCE MATERIALS - GOOD PRACTICE IN USING REFERENCE MATERIALS |
|
ISO/IEC Guide 99:2007
|
International vocabulary of metrology Basic and general concepts and associated terms (VIM) |
|
BS ISO 18899:2013
|
Rubber. Guide to the calibration of test equipment |
|
ASTM E 2977 : 2015 : REDLINE
|
Standard Practice for Measuring and Reporting Performance of Fourier-Transform Nuclear Magnetic Resonance (FT-NMR) Spectrometers for Liquid Samples |
|
ISO 14606:2015
|
Surface chemical analysis — Sputter depth profiling — Optimization using layered systems as reference materials |
|
AAMI ISO 14708-5 : 2010
|
IMPLANTS FOR SURGERY - ACTIVE IMPLANTABLE MEDICAL DEVICES - PART 5: CIRCULATORY SUPPORT DEVICES |
|
EN 14726:2005
|
Aluminium and aluminium alloys - Chemical analysis - Guideline for spark optical emission spectrometric analysis |
|
S.R. CEN/TR 10317:2014
|
EUROPEAN CERTIFIED REFERENCE MATERIALS (EURONORM-CRMS) FOR THE DETERMINATION OF THE CHEMICAL COMPOSITION OF IRON AND STEEL PRODUCTS PREPARED UNDER THE AUSPICES OF THE EUROPEAN COMMITTEE FOR IRON AND STEEL STANDARDIZATION (ECISS) |
|
ISO/TS 14411-1:2017
|
Preparation of particulate reference materials Part 1: Polydisperse material based on picket fence of monodisperse spherical particles |
|
BS EN 15842:2010
|
Foodstuffs. Detection of food allergens. General considerations and validation of methods |
|
ISO Guide 30:2015
|
Reference materials Selected terms and definitions |
|
UNI EN ISO 15351 : 2010
|
STEEL AND IRON - DETERMINATION OF NITROGEN CONTENT - THERMAL CONDUCTIMETRIC METHOD AFTER FUSION IN A CURRENT OF INERT GAS (ROUTINE METHOD) |
|
ISO Guide 34:2009
|
General requirements for the competence of reference material producers |
|
DIN EN ISO 6974-2:2012-11
|
Natural gas - Determination of composition and associated uncertainty by gas chromatography - Part 2: Uncertainty calculations (ISO 6974-2:2012) |
|
UNE-EN ISO 6974-2:2013
|
Natural gas - Determination of composition and associated uncertainty by gas chromatography - Part 2: Uncertainty calculations (ISO 6974-2:2012) |
|
BS EN 14726:2005
|
ALUMINIUM AND ALUMINIUM ALLOYS - CHEMICAL ANALYSIS - GUIDELINE FOR SPARK OPTICAL EMISSION SPECTROMETRIC ANALYSIS |
|
UNE-EN ISO 6974-1:2013
|
Natural gas - Determination of composition and associated uncertainty by gas chromatography - Part 1: General guidelines and calculation of composition (ISO 6974-1:2012) |
|
BS EN 12287:1999
|
IN VITRO DIAGNOSTIC MEDICAL DEVICES - MEASUREMENT OF QUANTITIES IN SAMPLES OF BIOLOGICAL ORIGIN - DESCRIPTION OF REFERENCE MATERIALS |
|
EN ISO 6974-2:2012
|
Natural gas - Determination of composition and associated uncertainty by gas chromatography - Part 2: Uncertainty calculations (ISO 6974-2:2012) |
|
UNI EN 196-2 : 2013
|
METHOD OF TESTING CEMENT - PART 2: CHEMICAL ANALYSIS OF CEMENT |
|
UNI EN ISO 6974-2 : 2012
|
NATURAL GAS - DETERMINATION OF COMPOSITION AND ASSOCIATED UNCERTAINTY BY GAS CHROMATOGRAPHY - PART 2: UNCERTAINTY CALCULATIONS |
|
EN ISO 15351:2010
|
Steel and iron - Determination of nitrogen content - Thermal conductimetric method after fusion in a current of inert gas (Routine method) (ISO 15351:1999) |
|
UNI EN ISO 6974-1 : 2012
|
NATURAL GAS - DETERMINATION OF COMPOSITION AND ASSOCIATED UNCERTAINTY BY GAS CHROMATOGRAPHY - PART 1: GENERAL GUIDELINES AND CALCULATION OF COMPOSITION |
|
UNI EN ISO 10723 : 2013
|
NATURAL GAS - PERFORMANCE EVALUATION FOR ANALYTICAL SYSTEMS |
|
UNE-EN ISO 148-3:2017
|
Metallic materials - Charpy pendulum impact test - Part 3: Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines (ISO 148-3:2016) |
|
PD ISO/TR 11773:2013
|
GLOBAL DISTRIBUTION OF REFERENCE MATERIALS |
|
12/30271500 DC : 0
|
BS ISO GUIDE 80 - GUIDANCE FOR IN-HOUSE PRODUCTION OF REFERENCE MATERIALS FOR QUALITY CONTROL (QCMS) |
|
PD ISO Guide 34:2009
|
GENERAL REQUIREMENTS FOR THE COMPETENCE OF REFERENCE MATERIAL PRODUCERS |
|
DIN EN ISO 15194:2009-10
|
IN VITRO DIAGNOSTIC MEDICAL DEVICES - MEASUREMENT OF QUANTITIES IN SAMPLES OF BIOLOGICAL ORIGIN - REQUIREMENTS FOR CERTIFIED REFERENCE MATERIALS AND THE CONTENT OF SUPPORTING DOCUMENTATION |
|
BS EN ISO 16961:2015
|
Petroleum, petrochemical and natural gas industries. Internal coating and lining of steel storage tanks |
|
13/30294275 DC : 0
|
BS ISO GUIDE 30 - REFERENCE MATERIALS - SELECTED TERMS AND DEFINITIONS |
|
CEN/TR 10317:2014
|
European certified reference materials (EURONORM-CRMs) for the determination of the chemical composition of iron and steel products prepared under the auspices of the European Committee for Iron and Steel Standardization (ECISS) |
|
09/30210426 DC : 0
|
BS EN ISO 15351 - STEEL AND IRON - DETERMINATION OF NITROGEN CONTENT - THERMAL CONDUCTIMETRIC METHOD AFTER FUSION IN A CURRENT OF INERT GAS (ROUTINE METHOD) |
|
PD ISO GUIDE 30:2015
|
REFERENCE MATERIALS - SELECTED TERMS AND DEFINITIONS |
|
PREN 45001 : DRAFT 1997
|
GENERAL REQUIREMENTS FOR THE COMPETENCE OF TESTING AND CALIBRATION LABORATORIES |
|
ASTM D 6808 : 2002 : R2012
|
Standard Practice for Competency Requirements of Reference Material Producers for Water Analysis |
|
03/109441 DC : DRAFT JUNE 2003
|
EN 14726 - ALUMINIUM AND ALUMINIUM ALLOYS - CHEMICAL ANALYSIS - GUIDELINE FOR SPARK OPTICAL EMISSION SPECTROMETRIC ANALYSIS |
|
UNI CEI 70099 : 2008
|
INTERNATIONAL VOCABULARY OF METROLOGY - BASIC AND GENERAL CONCEPTS AND ASSOCIATED TERMS (VIM) |
|
UNI EN 3976 : 2008
|
AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TEST METHOD - CHEMICAL ANALYSIS FOR THE DETERMINATION OF HYDROGEN CONTENT |
|
I.S. EN ISO 15351:2010
|
STEEL AND IRON - DETERMINATION OF NITROGEN CONTENT - THERMAL CONDUCTIMETRIC METHOD AFTER FUSION IN A CURRENT OF INERT GAS (ROUTINE METHOD) |
|
NF EN ISO 15194 : 2009
|
IN VITRO DIAGNOSTIC MEDICAL DEVICES - MEASUREMENT OF QUANTITIES IN SAMPLES OF BIOLOGICAL ORIGIN - REQUIREMENTS FOR CERTIFIED REFERENCE MATERIALS AND THE CONTENT OF SUPPORTING DOCUMENTATION |
|
CEI UNI EN ISO 17034 : 1ED 2018
|
GENERAL REQUIREMENTS FOR THE COMPETENCE OF REFERENCE MATERIAL PRODUCERS |
|
CSA Z15189 : 2003
|
MEDICAL LABORATORIES - PARTICULAR REQUIREMENTS FOR QUALITY AND COMPETENCE |
|
BS ISO 17034 : 2016
|
GENERAL REQUIREMENTS FOR THE COMPETENCE OF REFERENCE MATERIAL PRODUCERS |
|
ASTM D 6362 : 1998
|
Standard Practice for Certificates of Reference Materials for Water Analysis |
|
ASTM D 6808 : 2002
|
Standard Practice for Competency Requirements of Reference Material Producers for Water Analysis |
|
ASTM D 6596 : 2000 : R2011
|
Standard Practice for Ampulization and Storage of Gasoline and Related Hydrocarbon Materials |
|
ISO 18899:2013
|
Rubber — Guide to the calibration of test equipment |
|
I.S. EN 15842:2010
|
FOODSTUFFS - DETECTION OF FOOD ALLERGENS - GENERAL CONSIDERATIONS AND VALIDATION OF METHODS |
|
ISO/TS 16195:2013
|
Nanotechnologies Guidance for developing representative test materials consisting of nano-objects in dry powder form |
|
EN ISO 6141:2015
|
Gas analysis - Contents of certificates for calibration gas mixtures (ISO 6141:2015) |
|
I.S. EN ISO 6141:2015
|
GAS ANALYSIS - CONTENTS OF CERTIFICATES FOR CALIBRATION GAS MIXTURES (ISO 6141:2015) |
|
BS EN ISO 6974-2:2012
|
NATURAL GAS - DETERMINATION OF COMPOSITION AND ASSOCIATED UNCERTAINTY BY GAS CHROMATOGRAPHY - PART 2: UNCERTAINTY CALCULATIONS (ISO 6974-2:2012) |
|
ISO 16961:2015
|
Petroleum, petrochemical and natural gas industries Internal coating and lining of steel storage tanks |
|
UNE-EN ISO 10993-12:2013
|
Biological evaluation of medical devices - Part 12: Sample preparation and reference materials (ISO 10993-12:2012) |
|
ISO 10993-12:2012
|
Biological evaluation of medical devices Part 12: Sample preparation and reference materials |
|
UNE-EN ISO 10723:2013
|
Natural gas - Performance evaluation for analytical systems (ISO 10723:2012) |
|
BS EN ISO 6141:2015
|
Gas analysis. Contents of certificates for calibration gas mixtures |
|
ISO 10723:2012
|
Natural gas Performance evaluation for analytical systems |
|
ISO 15351:1999
|
Steel and iron — Determination of nitrogen content — Thermal conductimetric method after fusion in a current of inert gas (Routine method) |
|
ISO 6974-2:2012
|
Natural gas — Determination of composition and associated uncertainty by gas chromatography — Part 2: Uncertainty calculations |
|
BS EN ISO 6974-1:2012
|
NATURAL GAS - DETERMINATION OF COMPOSITION AND ASSOCIATED UNCERTAINTY BY GAS CHROMATOGRAPHY - PART 1: GENERAL GUIDELINES AND CALCULATION OF COMPOSITION |
|
UNE-EN ISO 6141:2015
|
Gas analysis - Contents of certificates for calibration gas mixtures (ISO 6141:2015) |
|
BS EN ISO 10723:2012
|
NATURAL GAS - PERFORMANCE EVALUATION FOR ANALYTICAL SYSTEMS |
|
ISO 17034:2016
|
General requirements for the competence of reference material producers |
|
EN ISO 10723:2012
|
Natural gas - Performance evaluation for analytical systems (ISO 10723:2012) |
|
EN ISO 17034:2016
|
General requirements for the competence of reference material producers (ISO 17034:2016) |
|
EN ISO 10993-8 : 2000
|
BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 8: SELECTION AND QUALIFICATION OF REFERENCE MATERIALS FOR BIOLOGICAL TESTS |
|
EN 15842:2010
|
Foodstuffs - Detection of food allergens - General considerations and validation of methods |
|
EN 3976:2006
|
Aerospace series - Titanium and titanium alloys - Test method - Chemical analysis for the determination of hydrogen content |
|
EN ISO 6974-1:2012/AC:2012
|
NATURAL GAS - DETERMINATION OF COMPOSITION AND ASSOCIATED UNCERTAINTY BY GAS CHROMATOGRAPHY - PART 1: GENERAL GUIDELINES AND CALCULATION OF COMPOSITION (ISO 6974-1:2012/COR 1:2012) |
|
EN ISO 15194:2009
|
In vitro diagnostic medical devices - Measurement of quantities in samples of biological origin - Requirements for certified reference materials and the content of supporting documentation (ISO 15194:2009) |
|
EN ISO 16961:2015
|
Petroleum, petrochemical and natural gas industries - Internal coating and lining of steel storage tanks (ISO 16961:2015) |
|
EN 196-2:2013
|
Method of testing cement - Part 2: Chemical analysis of cement |
|
ISO Guide 35:2017
|
Reference materials Guidance for characterization and assessment of homogeneity and stability |
|
BS EN ISO 17034:2016 (published 2016-12)
|
General requirements for the competence of reference material producers |
|
PD ISO/TS 20460:2015
|
Paper and board. Automated on-line testing. Metrological comparability between standardized measurements and output of on-line gauges |
|
BS ISO 14595:2014
|
Microbeam analysis. Electron probe microanalysis. Guidelines for the specification of certified reference materials (CRMs) |
|
ISO/TR 16476:2016
|
Reference materials — Establishing and expressing metrological traceability of quantity values assigned to reference materials |
|
NF ISO 14595 : 2006
|
MICROBEAM ANALYSIS - ELECTRON PROBE MICROANALYSIS - GUIDELINES FOR THE SPECIFICATION OF CERTIFIED REFERENCE MATERIALS (CRMS) |
|
PD ISO GUIDE 33:2015
|
Reference materials. Good practice in using reference materials |
|
INCITS/ISO TS 19159-1 : 2015
|
GEOGRAPHIC INFORMATION - CALIBRATION AND VALIDATION OF REMOTE SENSING IMAGERY SENSORS AND DATA - PART 1: OPTICAL SENSORS |
|
EN ISO 10993-12:2012
|
Biological evaluation of medical devices - Part 12: Sample preparation and reference materials (ISO 10993-12:2012) |
|
97/402277 DC : DRAFT APR 1997
|
PREN 45001 - GENERAL REQUIREMENTS FOR THE COMPETENCE OF TESTING AND CALIBRATION LABORATORIES |
|
UNI EN ISO 15194 : 2009
|
IN VITRO DIAGNOSTIC MEDICAL DEVICES - MEASUREMENT OF QUANTITIES IN SAMPLES OF BIOLOGICAL ORIGIN - REQUIREMENTS FOR CERTIFIED REFERENCE MATERIALS AND THE CONTENT OF SUPPORTING DOCUMENTATION |
|
ISO Guide 33:2015
|
Reference materials Good practice in using reference materials |
|
ISO 29581-2:2010
|
Cement Test methods Part 2: Chemical analysis by X-ray fluorescence |
|
ISO/TS 20460:2015
|
Paper and board — Automated on-line testing — Metrological comparability between standardized measurements and output of on-line gauges |
|
ANSI/AAMI/ISO 10993-12:2012
|
BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 12: SAMPLE PREPARATION AND REFERENCE MATERIALS |
|
I.S. EN ISO 16961:2015
|
PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - INTERNAL COATING AND LINING OF STEEL STORAGE TANKS (ISO 16961:2015) |
|
ISO 14708-5:2010
|
Implants for surgery Active implantable medical devices Part 5: Circulatory support devices |
|
ASTM E 1831 : 1996
|
Standard Guide for Preparing Certificates for Reference Materials Relating to Chemical Composition of Metals, Ores, and Related Materials (Withdrawn 2005) |
|
ASTM D 6808 : 2002 : R2007
|
Standard Practice for Competency Requirements of Reference Material Producers for Water Analysis |
|
DIN EN 14726 E : 2005
|
ALUMINIUM AND ALUMINIUM ALLOYS - CHEMICAL ANALYSIS - GUIDELINE FOR SPARK OPTICAL EMISSION SPECTROMETRIC ANALYSIS |
|
ASTM E 1724 : 1995 : R2001
|
Standard Guide for Testing and Certification of Metal and Metal-Related Reference Materials (Withdrawn 2010) |
|
ISO 15194:2009
|
In vitro diagnostic medical devices Measurement of quantities in samples of biological origin Requirements for certified reference materials and the content of supporting documentation |
|
DIN EN ISO 6974-1 E : 2012
|
NATURAL GAS - DETERMINATION OF COMPOSITION AND ASSOCIATED UNCERTAINTY BY GAS CHROMATOGRAPHY - PART 1: GENERAL GUIDELINES AND CALCULATION OF COMPOSITION (ISO 6974-1:2012) |
|
BS EN 196-2:2013
|
Method of testing cement Chemical analysis of cement |
|
ISO 148-3:2016
|
Metallic materials — Charpy pendulum impact test — Part 3: Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines |
|
BS EN 3976:2006
|
AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TEST METHOD - CHEMICAL ANALYSIS FOR THE DETERMINATION OF HYDROGEN CONTENT |
|
DIN EN 14726:2005-12
|
ALUMINIUM AND ALUMINIUM ALLOYS - CHEMICAL ANALYSIS - GUIDELINE FOR SPARK OPTICAL EMISSION SPECTROMETRIC ANALYSIS |
|
DIN EN ISO 6141:2015-07
|
GAS ANALYSIS - CONTENTS OF CERTIFICATES FOR CALIBRATION GAS MIXTURES (ISO 6141:2015) |