ISO/IEC Guide 98:1993

Withdrawn

View Superseded by

Guide to the expression of uncertainty in measurement (GUM)

Available format(s)

Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users

Withdrawn date

23-09-2021

Language(s)

English, French

Published date

01-01-1993

Publisher

International Organization for Standardization

DocumentType	Guide
Pages	105
PublisherName	International Organization for Standardization
Status	Withdrawn
SupersededBy	ISO/IEC Guide 98-3:2008

I.S. EN IEC 62828-1:2018	REFERENCE CONDITIONS AND PROCEDURES FOR TESTING INDUSTRIAL AND PROCESS MEASUREMENT TRANSMITTERS - PART 1: GENERAL PROCEDURES FOR ALL TYPES OF TRANSMITTERS
09/30165942 DC : 0	BS ISO 21438-3 - WORKPLACE ATMOSPHERES - DETERMINATION OF INORGANIC ACIDS BY ION CHROMATOGRAPHY - PART 3: HYDROFLUORIC ACID AND PARTICULATE FLUORIDES
17/30349825 DC : 0	BS EN ISO 10704 - WATER QUALITY - GROSS ALPHA AND GROSS BETA ACTIVITY - TEST METHOD USING THIN SOURCE DEPOSIT
DD CEN ISO/TS 15530-3:2007	Geometrical product specifications (GPS). Coordinate measuring machines (CMM). Technique for determining the uncertainty of measurement Use of calibrated workpieces or standards
09/30187538 DC : 0	BS EN 15979 - TESTING OF CERAMIC RAW AND BASIC MATERIALS - DIRECT DETERMINATION OF MASS FRACTIONS OF IMPURITIES IN POWDERS AND GRANULES OF SILICON CARBIDE BY OES BY DC ARC EXCITATION
13/30247422 DC : 0	BS EN 62220-1-1 - MEDICAL ELECTRICAL EQUIPMENT - CHARACTERISTICS OF DIGITAL X-RAY IMAGING DEVICES - PART 1-1: DETERMINATION OF THE DETECTIVE QUANTUM EFFICIENCY - DETECTORS USED IN RADIOGRAPHIC IMAGING
BS EN 62494-1:2008	Medical electrical equipment. Exposure index of digital X-ray imaging systems Definitions and requirements for general radiography
BS EN 15305:2008	Non-destructive testing. Test method for residual stress analysis by X-ray diffraction
DD ISO/TS 29041:2008	Gas mixtures. Gravimetric preparation. Mastering correlations in composition
I.S. EN ISO 4869-3:2007	ACOUSTICS - HEARING PROTECTORS - PART 3: MEASUREMENT OF INSERTION LOSS OF EAR-MUFF TYPE PROTECTORS USING AN ACOUSTIC TEST FIXTURE
BS EN 62220-1-3:2008	Medical electrical equipment. Characteristics of digital X-ray imaging devices Determination of the detective quantum efficiency. Detectors used in dynamic imaging
ISO 5130:2007	Acoustics Measurements of sound pressure level emitted by stationary road vehicles
OIML R 80-1 : 2009	ROAD AND RAIL TANKERS WITH LEVEL GAUGING - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS
BS ISO 12789-2:2008	Reference radiation fields. Simulated workplace neutron fields Calibration fundamentals related to the basic quantities
08/30192855 DC : 0	BS ISO 5-4 - PHOTOGRAPHY AND GRAPHIC TECHNOLOGY - SPECTRAL DENSITY MEASUREMENTS - PART 4: GEOMETRIC CONDITIONS FOR REFLECTION DENSITY
ISO 1088:2007	Hydrometry Velocity-area methods using current-meters Collection and processing of data for determination of uncertainties in flow measurement
08/30173423 DC : DRAFT JULY 2008	BS EN 60601-2-5 - MEDICAL ELECTRICAL EQUIPMENT - PART 2-5: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF ULTRASONIC PHYSIOTHERAPY EQUIPMENT
09/30205921 DC : 0	BS EN 1794-2 - ROAD TRAFFIC NOISE REDUCING DEVICES - NON-ACOUSTIC PERFORMANCE - PART 2: GENERAL SAFETY AND ENVIRONMENTAL REQUIREMENTS
PREN ISO 80601-2-61 : DRAFT 2009	MEDICAL ELECTRICAL EQUIPMENT - PART 2-61: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF PULSE OXIMETER EQUIPMENT FOR MEDICAL USE
12/30234846 DC : 0	BS ISO 19238 - RADIATION PROTECTION - PERFORMANCE CRITERIA FOR SERVICE LABORATORIES PERFORMING BIOLOGICAL DOSIMETRY BY CYTOGENETICS
08/30182096 DC : 0	BS ISO 27894 - VACUUM TECHNOLOGY - VACUUM GAUGES - SPECIFICATIONS FOR HOT CATHODE IONIZATION GAUGES
09/30196964 DC : 0	BS EN ISO 25178-7 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 7: SOFTWARE MEASUREMENT STANDARDS
09/30187541 DC : 0	BS EN 15991 - TESTING OF CERAMIC AND BASIC MATERIALS - DIRECT DETERMINATION OF MASS FRACTIONS OF IMPURITIES IN POWDERS AND GRANULES OF NON-OXIDIC CERAMIC RAW AND BASIC MATERIALS BY INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROSCOPY (ICP OES) WITH ELECTROTHERMAL VAPORISATION (ETV)
CEI EN 60942 : 2004	ELECTROACOUSTICS SOUND CALIBRATORS
S.R. CEN ISO/TR 22007-5:2014	PLASTICS - DETERMINATION OF THERMAL CONDUCTIVITY AND THERMAL DIFFUSIVITY - PART 5: RESULTS OF INTERLABORATORY TESTING OF POLY(METHYL METHACRYLATE) SAMPLES (ISO/TR 22007-5:2011)
UNI EN ISO 9241-305 : 2009	ERGONOMICS OF HUMAN-SYSTEM INTERACTION - PART 305: OPTICAL LABORATORY TEST METHODS FOR ELECTRONIC VISUAL DISPLAYS
08/30189820 DC : DRAFT SEP 2008	BS EN ISO 8253-1 - ACOUSTICS - AUDIOMETRIC TEST METHODS - PART 1: BASIC PURE-TONE AIR AND BONE CONDUCTION THRESHOLD AUDIOMETRY
UNI EN ISO 6145-4 : 2009	GAS ANALYSIS - PREPARATION OF CALIBRATION GAS MIXTURES USING DYNAMIC VOLUMETRIC METHODS - PART 4: CONTINUOUS SYRINGE INJECTION METHOD
09/30205918 DC : 0	BS EN 1794-1 - ROAD TRAFFIC NOISE REDUCING DEVICES - NON-ACOUSTIC PERFORMANCE - PART 1: MECHANICAL PERFORMANCE AND STABILITY REQUIREMENTS
DD ISO/TS 19101-2:2008	Geographic information. Reference model Imagery
ISO 11843-5:2008	Capability of detection — Part 5: Methodology in the linear and non-linear calibration cases
BS EN ISO 6145-11:2008	Gas analysis. Preparation of calibration gas mixtures using dynamic volumetric methods Electrochemical generation
DIN EN 1793-4:2015-05	ROAD TRAFFIC NOISE REDUCING DEVICES - TEST METHOD FOR DETERMINING THE ACOUSTIC PERFORMANCE - PART 4: INTRINSIC CHARACTERISTICS - IN SITU VALUES OF SOUND DIFFRACTION
13/30290089 DC : 0	IEC 62321 2ND EDITION - DETERMINATION OF CERTAIN SUBSTANCES IN ELECTROTECHNICAL PRODUCTS - PART 8: PHTHALATES IN POLYMERS BY PYROLYZER GAS CHROMATOGRAPHY-MASS SPECTROMETRY (PY-GC-MS), ION ATTACHMENT MASS SPECTROMETRY (IAMS), GAS CHROMATOGRAPHY-MASS SPECTROMETRY (GC-MS) AND LIQUID CHROMATOGRAPHY - MASS SPECTROMETRY (LC-MS)
ISO 5667-20:2008	Water quality Sampling Part 20: Guidance on the use of sampling data for decision making Compliance with thresholds and classification systems
08/30152625 DC : DRAFT APR 2008	BS ISO 16110-2 - HYDROGEN GENERATORS USING FUEL PROCESSING TECHNOLOGIES - PART 2: PROCEDURES TO DETERMINE EFFICIENCY
EN ISO 8041:2005/AC:2008	HUMAN RESPONSE TO VIBRATION - MEASURING INSTRUMENTATION
11/30236685 DC : 0	BS ISO/IEC 18047-2 - INFORMATION TECHNOLOGY - RADIO FREQUENCY IDENTIFICATION DEVICE CONFORMANCE TEST METHODS - PART 2: TEST METHODS FOR AIR INTERFACE COMMUNICATIONS BELOW 135 KHZ
I.S. EN 60601-2-5:2015	MEDICAL ELECTRICAL EQUIPMENT - PART 2-5: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF ULTRASONIC PHYSIOTHERAPY EQUIPMENT
09/30196542 DC : 0	BS ISO 9698 - WATER QUALITY - DETERMINATION OF TRITIUM ACTIVITY CONCENTRATION - LIQUID SCINTILLATION COUNTING METHOD
10/30218973 DC : DRAFT JUNE 2010	BS EN 1793-6 - ROAD TRAFFIC NOISE REDUCING DEVICES - TEST METHOD FOR DETERMINING THE ACOUSTIC PERFORMANCE - PART 6: INTRINSIC CHARACTERISTICS - IN SITU VALUES OF AIRBORNE SOUND INSULATION UNDER DIRECT SOUND FIELD CONDITIONS
BIS IS/ISO 10012 : 2003(R2009)	MEASUREMENT MANAGEMENT SYSTEMS - REQUIREMENTS FOR MEASUREMENT PROCESSES AND MEASURING EQUIPMENT
I.S. EN 62058-31:2010	ELECTRICITY METERING EQUIPMENT (A.C.) - ACCEPTANCE INSPECTION - PART 31: PARTICULAR REQUIREMENTS FOR STATIC METERS FOR ACTIVE ENERGY (CLASSES 0,2 S, 0,5 S, 1 AND 2, AND CLASS INDEXES A, B AND C)
DD ISO/TS 13473-4:2008	Characterization of pavement texture by use of surface profiles Spectral analysis of texture profiles
OIML R 81 : 1998	DYNAMIC MEASURING DEVICES AND SYSTEMS FOR CRYOGENIC LIQUIDS
09/30185156 DC : 0	BS EN 1811 - REFERENCE TEST METHODS FOR RELEASE OF NICKEL FROM PRODUCTS INTENDED TO COME INTO DIRECT AND PROLONGED CONTACT WITH THE SKIN
DIN EN ISO 6145-1:2008-11	GAS ANALYSIS - PREPARATION OF CALIBRATION GAS MIXTURES USING DYNAMIC VOLUMETRIC METHODS - PART 1: METHODS OF CALIBRATION
I.S. EN 60601-2-37:2008	MEDICAL ELECTRICAL EQUIPMENT - PART 2-37: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF ULTRASONIC MEDICAL DIAGNOSTIC AND MONITORING EQUIPMENT
BS EN 62127-3 : 2007	ULTRASONICS - HYDROPHONES - PART 3: PROPERTIES OF HYDROPHONES FOR ULTRASONIC FIELDS UP TO 40 MHZ
UNI CEN/TS 16011 : 2013	PLASTICS - RECYCLED PLASTICS - SAMPLE PREPARATION
CEI UNI EN ISO/IEC 17025 : 2008	GENERAL REQUIREMENTS FOR THE COMPETENCE OF TESTING AND CALIBRATION LABORATORIES
NF EN 62127-1 : 2008 AMD 1 2013	ULTRASONICS - HYDROPHONES - PART 1: MEASUREMENT AND CHARACTERIZATION OF MEDICAL ULTRASONIC FIELDS UP TO 40 MHZ
BS EN ISO 17201-1:2005	Acoustics. Noise from shooting ranges Determination of muzzle blast by measurement
UNI EN 12102 : 2014	AIR CONDITIONERS, LIQUID CHILLING PACKAGES, HEAT PUMPS AND DEHUMIDIFIERS WITH ELECTRICALLY DRIVEN COMPRESSORS FOR SPACE HEATING AND COOLING - MEASUREMENT OF AIRBORNE NOISE - DETERMINATION OF THE SOUND POWER LEVEL
BS EN ISO 8041:2005	Human response to vibration. Measuring instrumentation
ISO/TS 25377:2007	Hydrometric uncertainty guidance (HUG)
11/30239716 DC : 0	BS EN 16242 - CONSERVATION OF CULTURAL PROPERTY - PROCEDURES AND INSTRUMENTS FOR MEASURING HUMIDITY IN THE AIR AND MOISTURE EXCHANGES BETWEEN AIR AND CULTURAL PROPERTY
UNE-EN ISO 11205:2010	Acoustics - Noise emitted by machinery and equipment - Engineering method for the determination of emission sound pressure levels in situ at the work station and at other specified positions using sound intensity (ISO 11205:2003)
UNE-EN ISO 14532:2017	Natural gas - Vocabulary (ISO 14532:2014)
ISO 6142:2001	Gas analysis Preparation of calibration gas mixtures Gravimetric method
BS EN ISO 4869-3:2007	Acoustics. Hearing protectors Measurement of insertion loss of ear-muff type protectors using an acoustic test fixture
EN 62058-21:2010	Electricity metering equipment (a.c.) - Acceptance inspection - Part 21: Particular requirements for electromechanical meters for active energy (classes 0,5, 1 and 2 and class indexes A and B)
EN ISO 12179:2000/AC:2008	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD - CALIBRATION OF CONTACT (STYLUS) INSTRUMENTS
EN 62271-109:2009/A1:2013	HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 109: ALTERNATING-CURRENT SERIES CAPACITOR BY-PASS SWITCHES (IEC 62271-109:2008/A1:2013)
EN 62494-1:2008	Medical electrical equipment - Exposure index of digital X-ray imaging systems - Part 1: Definitions and requirements for general radiography
EN 61280-2-9:2009	Fibre optic communication subsystem test procedures - Part 2-9: Digital systems - Optical signal-to-noise ratio measurement for dense wavelength-division multiplexed systems
CEN ISO/TS 25377:2007	Hydrometric uncertainty guidance (HUG) (ISO/TS 25377:2007)
EN 62369-1:2009	Evaluation of human exposure to electromagnetic fields from short range devices (SRDs) in various applications over the frequency range 0 GHz to 300 GHz - Part 1: Fields produced by devices used for electronic article surveillance, radio frequency identification and similar systems
EN 12470-3:2000+A1:2009	Clinical thermometers - Part 3: Performance of compact electrical thermometers (non-predictive and predictive) with maximum device
EN 12470-2:2000+A1:2009	Clinical thermometers - Part 2: Phase change type (dot matrix) thermometers
DIN EN ISO 15971 E : 2014	NATURAL GAS - MEASUREMENT OF PROPERTIES - CALORIFIC VALUE AND WOBBE INDEX (ISO 15971:2008)
NF EN 62058-21 : 2010	ELECTRICITY METERING EQUIPMENT (A.C.) - ACCEPTANCE INSPECTION - PART 21: PARTICULAR REQUIREMENTS FOR ELECTROMECHANICAL METERS FOR ACTIVE ENERGY (CLASSES 0,5, 1 AND 2 AND CLASS INDEXES A AND B)
I.S. EN 60068-3-11:2007	ENVIRONMENTAL TESTING - PART 3-11: SUPPORTING DOCUMENTATION AND GUIDANCE - CALCULATION OF UNCERTAINTY OF CONDITIONS IN CLIMATIC TEST CHAMBERS
UNI 11314 : 2009	METALLIC MATERIALS - CALIBRATION OF STATIC TORQUE MEASURING DEVICES
ISO 20486:2017	Non-destructive testing — Leak testing — Calibration of reference leaks for gases
PD ISO/TR 26762:2008	Natural gas. Upstream area. Allocation of gas and condensate
BS EN 60318-6:2008	Electroacoustics. Simulators of human head and ear Mechanical coupler for the measurement of bone vibrators
BS EN ISO 14509-1:2008	Small craft. Airborne sound emitted by powered recreational craft Pass-by measurement procedures
BS EN 60861:2008	Equipment for monitoring of radionuclides in liquid effluents and surface waters
DD ISO/TS 16610-1:2006	Geometrical product specifications (GPS). Filtration Overview and basic concepts
UNI EN ISO 6145-1 : 2009	GAS ANALYSIS - PREPARATION OF CALIBRATION GAS MIXTURES USING DYNAMIC VOLUMETRIC METHODS - PART 1: METHODS OF CALIBRATION
PD CEN/TS 16011:2013	Plastics. Recycled plastics. Sample preparation
UNE-EN 60601-2-5:2016	Medical electrical equipment - Part 2-5: Particular requirements for the basic safety and essential performance of ultrasonic physiotherapy equipment
08/30177421 DC : DRAFT AUG 2008	BS ISO 10302-2 - ACOUSTICS - MEASUREMENT OF AIRBORNE NOISE EMITTED AND STRUCTURE-BORNE VIBRATION INDUCED BY SMALL AIR MOVING DEVICES - PART 2: STRUCTURE-BORNE VIBRATION MEASUREMENTS
OIML R 115 : 1995	CLINICAL ELECTRICAL THERMOMETERS WITH MAXIMUM DEVICE
14/30313017 DC : 0	BS ISO 17183 - SOIL QUALITY - SCREENING SOILS FOR ISOPROPANOL-EXTRACTABLE ORGANIC COMPOUNDS BY DETERMINING EMULSIFICATION INDEX BY LIGHT ATTENUATION
I.S. EN 62311:2008	ASSESSMENT OF ELECTRONIC AND ELECTRICAL EQUIPMENT RELATED TO HUMAN EXPOSURE RESTRICTIONS FOR ELECTROMAGNETIC FIELDS (0 HZ - 300 GHZ)
BS ISO 15971 : 2008	NATURAL GAS - MEASUREMENT OF PROPERTIES - CALORIFIC VALUE AND WOBBE INDEX
13/30231417 DC : 0	BS ISO 16258-2 - WORKPLACE AIR - RESPIRABLE CRYSTALLINE SILICA BY X-RAY DIFFRACTION - PART 2: METHOD BY INDIRECT ANALYSIS
09/30198206 DC : 0	BS ISO 17736 - WORKPLACE AIR QUALITY - DETERMINATION OF ISOCYANATE IN AIR USING A DOUBLE-FILTER SAMPLING DEVICE AND ANALYSIS BY HIGH PRESSURE LIQUID CHROMATOGRAPHY
NF EN 62321 : 2009	ELECTROTECHNICAL PRODUCTS - DETERMINATION OF LEVELS OF SIX REGULATED SUBSTANCES (LEAD, MERCURY, CADMIUM, HEXAVALENT CHROMIUM, POLYBROMINATED BIPHENYLS, POLYBROMINATED DIPHENYL ETHERS)
08/30180118 DC : DRAFT MAR 2008	BS ISO 9277 - DETERMINATION OF THE SPECIFIC SURFACE AREA OF SOLIDS BY GAS ADSORPTION - BET METHOD
BS EN 15483:2008	Ambient air quality. Atmospheric measurements near ground with FTIR spectroscopy
ISO/TS 15530-4:2008	Geometrical Product Specifications (GPS) — Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement — Part 4: Evaluating task-specific measurement uncertainty using simulation
DIN EN ISO 10360-10 E : 2017	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ACCEPTANCE AND REVERIFICATION TESTS FOR COORDINATE MEASURING SYSTEMS (CMS) - PART 10: LASER TRACKERS FOR MEASURING POINT-TO-POINT DISTANCES (ISO 10360-10:2016)
09/30175027 DC : 0	BS ISO 14934-1 - FIRE TESTS - CALIBRATION AND USE OF HEAT FLUX METERS - PART 1: GENERAL PRINCIPLES
BS ISO 18738-1:2012	Measurement of ride quality Lifts (elevators)
DIN ISO/TS 16952-1:2007-03	TECHNICAL PRODUCT DOCUMENTATION - REFERENCE DESIGNATION SYSTEM - PART 1: GENERAL APPLICATION RULES
UNI ISO/TS 21749 : 2009	MEASUREMENT UNCERTAINTY FOR METROLOGICAL APPLICATIONS - REPEATED MEASUREMENTS AND NESTED EXPERIMENTS
08/30193653 DC : 0	BS ISO 17123-1 - OPTICS AND OPTICAL INSTRUMENTS - FIELD PROCEDURES FOR TESTING GEODETIC AND SURVEYING INSTRUMENTS - PART 1: THEORY
BS EN 60601-2-5:2015	Medical electrical equipment Particular requirements for the basic safety and essential performance of ultrasonic physiotherapy equipment
08/30168462 DC : DRAFT APR 2008	BS ISO 1217 - DISPLACEMENT COMPRESSORS - ACCEPTANCE TEST
PD CEN ISO/TR 24094:2007	Analysis of natural gas. Validation methods for gaseous reference materials
BS EN ISO 6145-10:2008	Gas analysis. Preparation of calibration gas mixtures using dynamic volumetric methods Permeation method
BS ISO 21243:2008	Radiation protection. Performance criteria for laboratories performing cytogenetic triage for assessment of mass casualties in radiological or nuclear emergencies. General principles and application to dicentric assay
UNI ISO 16702 : 2010	WORKPLACE AIR QUALITY - DETERMINATION OF TOTAL ORGANIC ISOCYANATE GROUPS IN AIR USING 1-(2-METHOXYPHENYL)PIPERAZINE AND LIQUID CHROMATOGRAPHY
09/30181956 DC : DRAFT MAY 2009	BS ISO 80601-2-61 - MEDICAL ELECTRICAL EQUIPMENT - PART 2-61: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF PULSE OXIMETER EQUIPMENT FOR MEDICAL USE
08/30192767 DC : 0	BS EN 62301 - HOUSEHOLD ELECTRICAL APPLIANCES - MANAGEMENT OF STANDBY POWER
CEI EN 62369-1 : 2013	EVALUATION OF HUMAN EXPOSURE TO ELECTROMAGNETIC FIELDS FROM SHORT RANGE DEVICES (SRDS) IN VARIOUS APPLICATIONS OVER THE FREQUENCY RANGE 0 GHZ TO 300 GHZ - PART 1: FIELDS PRODUCED BY DEVICES USED FOR ELECTRONIC ARTICLE SURVEILLANCE, RADIO FREQUENCY IDENTIFICATION AND SIMILAR SYSTEMS
DIN ISO 12789-2:2013-01	REFERENCE RADIATION FIELDS - SIMULATED WORKPLACE NEUTRON FIELDS - PART 2: CALIBRATION FUNDAMENTALS RELATED TO THE BASIC QUANTITIES (ISO 12789-2:2008)
ISO 18738-1:2012	Measurement of ride quality Part 1: Lifts (elevators)
ISO/TR 26762:2008	Natural gas — Upstream area — Allocation of gas and condensate
I.S. EN ISO 15796:2008	GAS ANALYSIS - INVESTIGATION AND TREATMENT OF ANALYTICAL BIAS
I.S. EN ISO 6145-4:2008	GAS ANALYSIS - PREPARATION OF CALIBRATION GAS MIXTURES USING DYNAMIC VOLUMETRIC METHODS - PART 4: CONTINUOUS SYRINGE INJECTION METHOD
ISO 17183:2016	Soil quality Screening soils for isopropanol-extractable organic compounds by determining emulsification index by light attenuation
BS ISO 5130 : 2007	ACOUSTICS - MEASUREMENTS OF SOUND PRESSURE LEVEL EMITTED BY STATIONARY ROAD VEHICLES
OIML R 114 : 1995	CLINICAL ELECTRICAL THERMOMETERS FOR CONTINUOUS MEASUREMENT
ASTM E 2536 : 2015 : REV A	Standard Guide for Assessment of Measurement Uncertainty in Fire Tests
ISO 17201-1:2005	Acoustics Noise from shooting ranges Part 1: Determination of muzzle blast by measurement
IEC TS 62492-1:2008	Industrial process control devices - Radiation thermometers - Part 1: Technical data for radiation thermometers
UNI EN ISO 14978 : 2006	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS AND REQUIREMENTS FOR GPS MEASURING EQUIPMENT
I.S. EN ISO 19739:2006	NATURAL GAS - DETERMINATION OF SULFUR COMPOUNDS USING GAS CHROMATOGRAPHY
I.S. EN 62494-1:2008	MEDICAL ELECTRICAL EQUIPMENT - EXPOSURE INDEX OF DIGITAL X-RAY IMAGING SYSTEMS - PART 1: DEFINITIONS AND REQUIREMENTS FOR GENERAL RADIOGRAPHY
IEC 62369-1:2008	Evaluation of human exposure to electromagnetic fields from short range devices (SRDs) in various applications over the frequency range 0 GHz to 300 GHz - Part 1: Fields produced by devices used for electronic article surveillance, radio frequency identification and similar systems
EN 62311:2008	Assessment of electronic and electrical equipment related to human exposure restrictions for electromagnetic fields (0 Hz - 300 GHz)
DIN EN ISO 20988 E : 2007	AIR QUALITY - GUIDELINES FOR ESTIMATING MEASUREMENT UNCERTAINTY
IEC 62127-2:2007+AMD1:2013+AMD2:2017 CSV	Ultrasonics - Hydrophones - Part 2: Calibration for ultrasonic fields up to 40 MHz
BS EN 12470-3 : 2000	CLINICAL THERMOMETERS - PART 3: PERFORMANCE OF COMPACT ELECTRICAL THERMOMETERS (NON-PREDICTIVE AND PREDICTIVE) WITH MAXIMUM DEVICE
I.S. EN ISO 21649:2009	NEEDLE-FREE INJECTORS FOR MEDICAL USE - REQUIREMENTS AND TEST METHODS
I.S. EN ISO 5667-1:2006	WATER QUALITY - SAMPLING - PART 1: GUIDANCE ON THE DESIGN OF SAMPLING PROGRAMMES AND SAMPLING TECHNIQUES
I.S. EN 12470-2:2000	CLINICAL THERMOMETERS - PART 2: PHASE CHANGE TYPE (DOT MATRIX) THERMOMETERS
I.S. EN ISO 11205:2009	ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - ENGINEERING METHOD FOR THE DETERMINATION OF EMISSION SOUND PRESSURE LEVELS IN SITU AT THE WORK STATION AND AT OTHER SPECIFIED POSITIONS USING SOUND INTENSITY
I.S. EN ISO 9614-3:2009	ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES USING SOUND INTENSITY - PART 3: PRECISION METHOD FOR MEASUREMENT BY SCANNING
ASME B46.1 : 2009	SURFACE TEXTURE (SURFACE ROUGHNESS, WAVINESS, AND LAY)
BS EN 61280-2-9:2009	Fibre optic communication subsystem test procedures Digital systems. Optical signal-to-noise ratio measurement for dense wavelength-division multiplexed systems
11/30241721 DC : 0	BS EN 62321-6 ED1 - DETERMINATION OF CERTAIN SUBSTANCES IN ELECTROTECHNICAL PRODUCTS - PART 6: DETERMINATION OF POLYBROMINATED BIPHENYLS AND POLYBROMINATED DIPHENYL ETHERS IN POLYMERS AND ELECTRONICS BY GC-MS, IAMS AND HPLC-UV
OIML R 140 : 2007	MEASURING SYSTEMS FOR GASEOUS FUEL
DIN EN ISO 6145-4:2008-11	Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 4: Continuous syringe injection method (ISO 6145-4:2004)
DD ISO/TS 15530-4:2008	Geometrical product specifications (GPS). Coordinate measuring machines (CMM). Technique for determining the uncertainty of measurement Evaluating task-specific measurement uncertainty using simulation
I.S. EN ISO 9919:2009	MEDICAL ELECTRICAL EQUIPMENT - PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF PULSE OXIMETER EQUIPMENT FOR MEDICAL USE
09/30125465 DC : 0	BS ISO 8769 - REFERENCE SOURCES - CALIBRATION OF SURFACE CONTAMINATION MONITORS - ALPHA-, BETA- AND PHOTON EMITTERS
I.S. EN 50492:2008	BASIC STANDARD FOR THE IN-SITU MEASUREMENT OF ELECTROMAGNETIC FIELD STRENGTH RELATED TO HUMAN EXPOSURE IN THE VICINITY OF BASE STATIONS
BS ISO 16000-8:2007	Indoor air Determination of local mean ages of air in buildings for characterizing ventilation conditions
13/30286032 DC : 0	BS ISO 22514-1 - STATISTICAL METHODS IN PROCESS MANAGEMENT - CAPABILITY AND PERFORMANCE - PART 1: GENERAL PRINCIPLES AND CONCEPTS
BS EN 60068-3-11:2007	Environmental testing Supporting documentation and guidance - Calculation of uncertainty of conditions in climatic test chambers
BS EN ISO 6145-4:2008	Gas analysis. Preparation of calibration gas mixtures using dynamic volumetric methods Continuous syringe injection method
DD ISO/TS 19036 : 2006	MICROBIOLOGY OF FOOD AND ANIMAL FEEDING STUFFS - GUIDELINES FOR THE ESTIMATION OF MEASUREMENT UNCERTAINTY FOR QUANTITATIVE DETERMINATIONS
08/30139611 DC : DRAFT JUNE 2008	BS ISO/IEC 17007 - CONFORMITY ASSESSMENT - GUIDELINES FOR DRAFTING NORMATIVE DOCUMENTS SUITABLE FOR USE FOR CONFORMITY ASSESSMENT
09/30205176 DC : 0	ISO/TS 25680 - MEDICAL LABORATORIES - CALCULATION AND EXPRESSION OF MEASUREMENT UNCERTAINTY
BS EN 62369-1:2009	Evaluation of human exposure to electromagnetic fields from short range devices (SRDs) in various applications over the frequency range 0 GHz to 300 GHz Fields produced by devices used for electronic article surveillance, radio frequency identification and similar systems
UNI EN 15483 : 2009	AMBIENT AIR QUALITY - ATMOSPHERIC MEASUREMENTS NEAR GROUND WITH FTIR SPECTROSCOPY
BS EN ISO 16000-15:2008	Indoor air Sampling strategy for nitrogen dioxide (NO2)
DIN EN ISO 10360-10:2017-03	Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 10: Laser trackers for measuring point-to-point distances (ISO 10360-10:2016)
UNI EN ISO 6145-11 : 2009	GAS ANALYSIS - PREPARATION OF CALIBRATION GAS MIXTURES USING DYNAMIC VOLUMETRIC METHODS - PART 11: ELECTROCHEMICAL GENERATION
NF EN 62058-31 : 2010	ELECTRICITY METERING EQUIPMENT (A.C.) - ACCEPTANCE INSPECTION - PART 31: PARTICULAR REQUIREMENTS FOR STATIC METERS FOR ACTIVE ENERGY (CLASSES 0,2 S, 0,5 S, 1 AND 2 AND CLASS INDEXES A, B AND C)
DIN EN 15483 E : 2009	AMBIENT AIR QUALITY - ATMOSPHERIC MEASUREMENTS NEAR GROUND WITH FTIR SPECTROSCOPY
OIML R 137-1 : 2006	GAS METERS - PART 1: REQUIREMENTS
OIML R 129 : 2000	MULTI-DIMENSIONAL MEASURING INSTRUMENTS
PD CEN ISO/TR 22007-5:2014	Plastics. Determination of thermal conductivity and thermal diffusivity Results of interlaboratory testing of poly(methyl methacrylate) samples
09/30198179 DC : 0	BS EN ISO 17450-2 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS - PART 2: BASIC TENETS, SPECIFICATIONS, OPERATORS AND UNCERTAINTIES
BS ISO 1088:2007	Hydrometry. Velocity-area methods using current-meters. Collection and processing of data for determination of uncertainties in flow measurement
17/30339109 DC : 0	BS ISO 17123-9 - OPTICS AND OPTICAL INSTRUMENTS - FIELD PROCEDURES FOR TESTING GEODETIC AND SURVEYING INSTRUMENTS - PART 9: TERRESTRIAL LASER SCANNERS
ISO/IEC Guide 99:2007	International vocabulary of metrology Basic and general concepts and associated terms (VIM)
BS EN 62233:2008	Measurement methods for electromagnetic fields of household appliances and similar apparatus with regard to human exposure
UNI ISO 11648-2 : 2008	STATISTICAL ASPECTS OF SAMPLING FROM BULK MATERIALS - PART 2: SAMPLING OF PARTICULATE MATERIALS
NF EN 60861 : 2008	EQUIPMENT FOR MONITORING OF RADIONUCLIDES IN LIQUID EFFLUENTS AND SURFACE WATERS
ISO 14509-1:2008	Small craft — Airborne sound emitted by powered recreational craft — Part 1: Pass-by measurement procedures
UNE-EN ISO 10360-10:2017	Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 10: Laser trackers for measuring point-to-point distances (ISO 10360-10:2016)
BS EN 62271-100 : 2009	HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 100: ALTERNATING-CURRENT CIRCUIT-BREAKERS (IEC 62271-100:2008)
CSA C22.2 No. 60601.2.37 : 2008 : R2014	MEDICAL ELECTRICAL EQUIPMENT - PART 2-37: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF ULTRASONIC MEDICAL DIAGNOSTIC AND MONITORING EQUIPMENT
ISO/TS 29041:2008	Gas mixtures — Gravimetric preparation — Mastering correlations in composition
I.S. EN ISO 6145-10:2008	GAS ANALYSIS - PREPARATION OF CALIBRATION GAS MIXTURES USING DYNAMIC VOLUMETRIC METHODS - PART 10: PERMEATION METHOD
ISO 15011-4:2017	Health and safety in welding and allied processes — Laboratory method for sampling fume and gases — Part 4: Fume data sheets
UNI EN ISO 15796 : 2009	GAS ANALYSIS - INVESTIGATION AND TREATMENT OF ANALYTICAL BIAS
I.S. EN 62220-1-3:2008	MEDICAL ELECTRICAL EQUIPMENT - CHARACTERISTICS OF DIGITAL X-RAY IMAGING DEVICES - PART 1-3: DETERMINATION OF THE DETECTIVE QUANTUM EFFICIENCY - DETECTORS USED IN DYNAMIC IMAGING
I.S. EN 62471:2008	PHOTOBIOLOGICAL SAFETY OF LAMPS AND LAMP SYSTEMS
CEI EN 62058-21 : 2011	ELECTRICITY METERING EQUIPMENT (A.C.) - ACCEPTANCE INSPECTION - PART 21: PARTICULAR REQUIREMENTS FOR ELECTROMECHANICAL METERS FOR ACTIVE ENERGY (CLASSES 0,5, 1 AND 2 AND CLASS INDEXES A AND B)
UNI EN ISO 15971 : 2014	NATURAL GAS - MEASUREMENT OF PROPERTIES - CALORIFIC VALUE AND WOBBE INDEX
ISO 18589-1:2005	Measurement of radioactivity in the environment Soil Part 1: General guidelines and definitions
UNE-EN 62369-1:2011	Evaluation of human exposure to electromagnetic fields from short range devices (SRDs) in various applications over the frequency range 0 GHz to 300 GHz -- Part 1: Fields produced by devices used for electronic article surveillance, radio frequency identification and similar systems
ASTM D 7911 : 2014	Standard Guide for Using Reference Material to Characterize Measurement Bias Associated with Volatile Organic Compound Emission Chamber Test
I.S. EN 15483:2008	AMBIENT AIR QUALITY - ATMOSPHERIC MEASUREMENTS NEAR GROUND WITH FTIR SPECTROSCOPY
ISO 16702:2007	Workplace air quality — Determination of total organic isocyanate groups in air using 1-(2-methoxyphenyl)piperazine and liquid chromatography
IEC 62058-31:2008	Electricity metering equipment (AC) - Acceptance inspection - Part 31: Particular requirements for static meters for active energy (classes 0,2 S, 0,5 S, 1 and 2)
BS EN ISO 9919:2009	Medical electrical equipment. Particular requirements for the basic safety and essential performance of pulse oximeter equipment for medical use
ISO 6145-1:2003	Gas analysis Preparation of calibration gas mixtures using dynamic volumetric methods Part 1: Methods of calibration
IEC 61280-2-9:2009	Fibre optic communication subsystem test procedures - Part 2-9: Digital systems - Optical signal-to-noise ratio measurement for dense wavelength-division multiplexed systems
ASA/ANSI S12.75:2012(R2020)	METHODS FOR THE MEASUREMENT OF NOISE EMISSIONS FROM HIGH PERFORMANCE MILITARY JET AIRCRAFT
BIS IS 1608 : 2005	METALLIC MATERIALS - TENSILE TESTING AT AMBIENT TEMPERATURE
I.S. EN ISO 8655-6:2002	PISTON-OPERATED VOLUMETRIC APPARATUS - PART 6: GRAVIMETRIC METHODS FOR THE DETERMINATION OF MEASUREMENT ERROR
EN ISO 16000-15:2008	Indoor air - Part 15: Sampling strategy for nitrogen dioxide (NO2) (ISO 16000-15:2008)
EN ISO 9241-305:2008	Ergonomics of human-system interaction - Part 305: Optical laboratory test methods for electronic visual displays (ISO 9241-305:2008)
UNI EN 12470-4 : 2009	CLINICAL THERMOMETERS - PART 4: PERFORMANCE OF ELECTRICAL THERMOMETERS FOR CONTINUOUS MEASUREMENT
PREN ISO 25178-7 : DRAFT 2009	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 7: SOFTWARE MEASUREMENT STANDARDS
UNI EN ISO 11205 : 2009	ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - ENGINEERING METHOD FOR THE DETERMINATION OF EMISSION SOUND PRESSURE LEVELS IN SITU AT THE WORK STATION AND AT OTHER SPECIFIED POSITIONS USING SOUND INTENSITY
UNI EN 12470-3 : 2009	CLINICAL THERMOMETERS - PART 3: PERFORMANCE OF COMPACT ELECTRICAL THERMOMETERS (NON-PREDICTIVE AND PREDICTIVE) WITH MAXIMUM DEVICE
UNI EN ISO 9614-3 : 2009	ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES USING SOUND INTENSITY - PART 3: PRECISION METHOD FOR MEASUREMENT BY SCANNING
UNI EN 12470-2 : 2009	CLINICAL THERMOMETERS - PART 2: PHASE CHANGE TYPE (DOT MATRIX) THERMOMETERS
EN ISO 9919:2009	Medical electrical equipment - Particular requirements for the basic safety and essential performance of pulse oximeter equipment for medical use (ISO 9919:2005)
UNI EN ISO 9919 : 2009	MEDICAL ELECTRICAL EQUIPMENT - PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF PULSE OXIMETER EQUIPMENT FOR MEDICAL USE
DIN EN 1793-4 E : 2015	ROAD TRAFFIC NOISE REDUCING DEVICES - TEST METHOD FOR DETERMINING THE ACOUSTIC PERFORMANCE - PART 4: INTRINSIC CHARACTERISTICS - IN SITU VALUES OF SOUND DIFFRACTION
08/30173520 DC : DRAFT FEB 2008	BS EN 15758 - CONSERVATION OF CULTURAL PROPERTY - PROCEDURES AND INSTRUMENTS FOR MEASURING TEMPERATURES OF THE AIR AND THE SURFACES OF OBJECTS
IEEE/ANSI C63.5-2017 REDLINE	American National Standard for Electromagnetic Compatibility--Radiated Emission Measurements in Electromagnetic Interference (EMI) Control--Calibration and Qualification of Antennas (9 kHz to 40 GHz)
DIN EN 15483:2009-02	AMBIENT AIR QUALITY - ATMOSPHERIC MEASUREMENTS NEAR GROUND WITH FTIR SPECTROSCOPY
IEC 62303:2008	Radiation protection instrumentation - Equipment for monitoring airborne tritium
PD ISO/TR 9464:2008	Guidelines for the use of ISO 5167:2003
DD IEC TS 62492-1 : DRAFT 2008	INDUSTRIAL PROCESS CONTROL DEVICES - RADIATION THERMOMETERS - PART 1: TECHNICAL DATA FOR RADIATION THERMOMETERS
14/30288436 DC : 0	BS EN ISO 27971 - CEREALS AND CEREAL PRODUCTS - COMMON WHEAT (TRITICUM AESTIVUM L.) - DETERMINATION OF ALVEOGRAPHIC PROPERTIES OF DOUGH AT CONSTANT HYDRATION FROM COMMERCIAL OR TEST FLOURS AND TEST MILLING METHODOLOGY
BS EN ISO 15796:2008	Gas analysis. Investigation and treatment of analytical bias
PREN 15979 : DRAFT 2009	TESTING OF CERAMIC RAW AND BASIC MATERIALS - DIRECT DETERMINATION OF MASS FRACTIONS OF IMPURITIES IN POWDERS AND GRANULES OF SILICON CARBIDE BY OES BY DC ARC EXCITATION
09/30165939 DC : 0	BS ISO 30011 - WORKPLACE AIR - DETERMINATION OF METALS AND METALLOIDS IN AIRBORNE PARTICULATE MATTER BY INDUCTIVELY COUPLED PLASMA MASS SPECTROMETRY
ISO/TS 13473-4:2008	Characterization of pavement texture by use of surface profiles — Part 4: Spectral analysis of surface profiles
08/30176438 DC : DRAFT JAN 2008	BS EN 60645-1 - ELECTRO ACOUSTICS - AUDIOMETRIC EQUIPMENT - PART 1: PURE-TONE AUDIOMETERS
OIML R 99-1 & 2 : 2008	INSTRUMENTS FOR MEASURING VEHICLE EXHAUST EMISSIONS - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS; PART 2: METROLOGICAL CONTROLS AND PERFORMANCE TESTS
IEC 62058-21:2008	Electricity metering equipment (AC) - Acceptance inspection - Part 21: Particular requirements for electromechanical meters for active energy (classes 0,5, 1 and 2)
BS ISO 5667-20:2008	Water quality. Sampling Guidance on the use of sampling data for decision making. Compliance with thresholds and classification systems
ISO 21243:2008	Radiation protection — Performance criteria for laboratories performing cytogenetic triage for assessment of mass casualties in radiological or nuclear emergencies — General principles and application to dicentric assay
OIML R 117-1 : 2007	DYNAMIC MEASURING SYSTEMS FOR LIQUIDS OTHER THAN WATER - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS
07/30126052 DC : 0	BS ISO 22514-1 - STATISTICAL METHODS IN PROCESS MANAGEMENT - CAPABILITY AND PERFORMANCE - PART 1: GENERAL PRINCIPLES AND CONCEPTS
12/30191872 DC : 0	BS EN 60601-2-62 - MEDICAL ELECTRICAL EQUIPMENT - PART 2-62: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF HIGH INTENSITY THERAPEUTIC ULTRASOUND (HITU) SYSTEM
S.R. CLC/TR 50462:2008	RULES FOR THE DETERMINATION OF UNCERTAINTIES IN THE MEASUREMENT OF THE LOSSES ON POWER TRANSFORMERS AND REACTORS
BS EN ISO 16610-85:2013	Geometrical product specifications (GPS). Filtration Morphological areal filters: Segmentation
PREN 16523-2 : DRAFT 2013	DETERMINATION OF MATERIAL RESISTANCE TO PERMEATION BY CHEMICALS - PART 2: PERMEATION BY GASEOUS CHEMICAL UNDER CONDITIONS OF CONTINUOUS CONTACT
PREN 1811 : DRAFT 2009	REFERENCE TEST METHOD FOR RELEASE OF NICKEL FROM POST ASSEMBLIES WHICH ARE INSERTED INTO PIERCED PARTS OF THE HUMAN BODY AND PRODUCTS INTENDED TO COME INTO DIRECT AND PROLONGED CONTACT WITH THE SKIN
DIN EN ISO 9241-305:2009-06	ERGONOMICS OF HUMAN-SYSTEM INTERACTION - PART 305: OPTICAL LABORATORY TEST METHODS FOR ELECTRONIC VISUAL DISPLAYS
UNI EN ISO 16000-12 : 2008	INDOOR AIR - PART 12: SAMPLING STRATEGY FOR POLYCHLORINATED BIPHENYLS (PCBS), POLYCHLORINATED DIBENZO-P-DIOXINS (PCDDS), POLYCHLORINATED DIBENZOFURANS (PCDFS) AND POLYCYCLIC AROMATIC HYDROCARBONS (PAHS)
09/30191982 DC : 0	BS ISO 21748 - GUIDANCE FOR THE USE OF REPEATABILITY, REPRODUCIBILITY AND TRUENESS ESTIMATES IN MEASUREMENT UNCERTAINTY ESTIMATION
BS EN ISO 14912:2006	Gas analysis. Conversion of gas mixture composition data
08/30157876 DC : 0
08/30158227 DC : DRAFT JUNE 2008	BS EN ISO 21258 - STATIONARY SOURCE EMISSIONS - DETERMINATION OF THE MASS CONCENTRATION OF DINITROGEN MONOXIDE - REFERENCE METHOD - NON-DISPERSIVE INFRARED METHOD
14/30297521 DC : 0	BS EN 16272-4 - RAILWAY APPLICATIONS - TRACK - NOISE BARRIERS AND RELATED DEVICES ACTING ON AIRBORNE SOUND PROPAGATION - TEST METHOD FOR DETERMINING THE ACOUSTIC PERFORMANCE - PART 4: INTRINSIC CHARACTERISTICS - IN SITU VALUES OF SOUND DIFFRACTION UNDER DIRECT SOUND FIELD CONDITIONS
BS EN 62471:2008	Photobiological safety of lamps and lamp systems
CEI EN 62220-1-3 : 2010	MEDICAL ELECTRICAL EQUIPMENT - CHARACTERISTICS OF DIGITAL X-RAY IMAGING DEVICES - PART 1: DETERMINATION OF THE DETECTIVE QUANTUM EFFICIENCY - DETECTORS USED IN DYNAMIC IMAGING
BS ISO 15796 : 2005	GAS ANALYSIS - INVESTIGATION AND TREATMENT OF ANALYTICAL BIAS
09/30168992 DC : 0	BS ISO 1100-2 - HYDROMETRY MEASUREMENT OF LIQUID FLOW IN OPEN CHANNELS - PART 2: DETERMINATION OF THE STAGE-DISCHARGE RELATION
ISO/TS 16610-1:2006	Geometrical product specifications (GPS) Filtration Part 1: Overview and basic concepts
BS ISO 18589-1:2005	Measurement of radioactivity in the environment. Soil General guidelines and definitions
09/30192061 DC : 0	BS ISO 11382 - OPTICS AND PHOTONICS - OPTICAL MATERIALS AND COMPONENTS - CHARACTERIZATION OF OPTICAL MATERIALS USED IN THE INFRARED SPECTRAL RANGE FROM 0,78 [MU]M TO 25 [MU]M
UNI EN ISO 15011-4 : 2009	HEALTH AND SAFETY IN WELDING AND ALLIED PROCESSES - LABORATORY METHOD FOR SAMPLING FUME AND GASES - PART 4: FUME DATA SHEETS
CAN/CSA-C62301:2011(R2016)	HOUSEHOLD ELECTRICAL APPLIANCES - MEASUREMENT OF STANDBY POWER
UNI CEI 70099 : 2008	INTERNATIONAL VOCABULARY OF METROLOGY - BASIC AND GENERAL CONCEPTS AND ASSOCIATED TERMS (VIM)
UNI ISO 11648-1 : 2008	STATISTICAL ASPECTS OF SAMPLING FROM BULK MATERIALS - PART 1: GENERAL PRINCIPLES
DIN EN ISO 15971:2014-09	Natural gas - Measurement of properties - Calorific value and Wobbe index (ISO 15971:2008)
ANSI/ASA S12.75 : 2012	METHODS FOR THE MEASUREMENT OF NOISE EMISSIONS FROM HIGH PERFORMANCE MILITARY JET AIRCRAFT
ASTM G 213 : 2017	Standard Guide for Evaluating Uncertainty in Calibration and Field Measurements of Broadband Irradiance with Pyranometers and Pyrheliometers
S.R. CEN/TS 16011:2013	PLASTICS - RECYCLED PLASTICS - SAMPLE PREPARATION
UNI EN 15305 : 2008	NON-DESTRUCTIVE TESTING - TEST METHOD FOR RESIDUAL STRESS ANALYSIS BY X-RAY DIFFRACTION
EN 62271-100 : 2009 AMD 2/COR 18	HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 100: ALTERNATING-CURRENT CIRCUIT-BREAKERS (IEC 62271-100:2008/A2:2017/COR1:2018)
BIS IS 1500 : 2005	METHOD FOR BRINELL HARDNESS TEST FOR METALLIC MATERIALS
PREN 1794-2 : DRAFT 2009	ROAD TRAFFIC NOISE REDUCING DEVICES - NON-ACOUSTIC PERFORMANCE - PART 2: GENERAL SAFETY AND ENVIRONMENTAL REQUIREMENTS
I.S. EN 62271-109:2009	HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 109: ALTERNATING-CURRENT SERIES CAPACITOR BY-PASS SWITCHES (IEC 62271-109:2008 (EQV))
CSA C22.2 No. 60601.2.37:2008	MEDICAL ELECTRICAL EQUIPMENT - PART 2-37: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF ULTRASONIC MEDICAL DIAGNOSTIC AND MONITORING EQUIPMENT
I.S. EN 15305:2008	NON-DESTRUCTIVE TESTING - TEST METHOD FOR RESIDUAL STRESS ANALYSIS BY X-RAY DIFFRACTION
EN ISO 14509-1:2008	Small craft - Airborne sound emitted by powered recreational craft - Part 1: Pass-by measurement procedures (ISO 14509-1:2008)
I.S. EN ISO 10846-5:2009	ACOUSTICS AND VIBRATION - LABORATORY MEASUREMENT OF VIBROACOUSTIC TRANSFER PROPERTIES OF RESILIENT ELEMENTS - PART 5: DRIVING POINT METHOD FOR DETERMINATION OF THE LOW-FREQUENCY TRANSFER STIFFNESS OF RESILIENT SUPPORTS FOR TRANSLATORY MOTION
ANSI S12.76 : 2017	METHODS FOR MEASUREMENT OF SUPERSONIC JET NOISE FROM UNINSTALLED MILITARY AIRCRAFT ENGINES
EN IEC 62828-1:2018	Reference conditions and procedures for testing industrial and process measurement transmitters - Part 1: General procedures for all types of transmitters
EN ISO 17201-1:2005/AC:2009	ACOUSTICS - NOISE FROM SHOOTING RANGES - PART 1: DETERMINATION OF MUZZLE BLAST BY MEASUREMENT
BS EN ISO 6145-1:2008	Gas analysis. Preparation of calibration gas mixtures using dynamic volumetric methods Methods of calibration
TS 102 706 : 1.3.1	ENVIRONMENTAL ENGINEERING (EE); MEASUREMENT METHOD FOR ENERGY EFFICIENCY OF WIRELESS ACCESS NETWORK EQUIPMENT
ISO/TR 9464:2008	Guidelines for the use of ISO 5167:2003
I.S. EN 61280-2-9:2009	FIBRE OPTIC COMMUNICATION SUBSYSTEM TEST PROCEDURES - PART 2-9: DIGITAL SYSTEMS - OPTICAL SIGNAL-TO-NOISE RATIO MEASUREMENT FOR DENSE WAVELENGTH-DIVISION MULTIPLEXED SYSTEMS
ISO 9241-305:2008	Ergonomics of human-system interaction — Part 305: Optical laboratory test methods for electronic visual displays
IEC 62220-1-3:2008	Medical electrical equipment - Characteristics of digital X-ray imaging devices - Part 1-3: Determination of the detective quantum efficiency - Detectors used in dynamic imaging
IEC 61966-5:2008	Multimedia systems and equipment - Colour measurement and management - Part 5: Equipment using plasma display panels
ISO 6145-11:2005	Gas analysis Preparation of calibration gas mixtures using dynamic volumetric methods Part 11: Electrochemical generation
ISO 4869-3:2007	Acoustics — Hearing protectors — Part 3: Measurement of insertion loss of ear-muff type protectors using an acoustic test fixture
BS EN ISO 20988:2007	Air quality. Guidelines for estimating measurement uncertainty
IEC 62321:2008	Electrotechnical products - Determination of levels of six regulated substances (lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls, polybrominated diphenyl ethers)
ISO 15796:2005	Gas analysis Investigation and treatment of analytical bias
ISO 6145-10:2002	Gas analysis — Preparation of calibration gas mixtures using dynamic volumetric methods — Part 10: Permeation method
ISO/TR 22007-5:2011	Plastics Determination of thermal conductivity and thermal diffusivity Part 5: Results of interlaboratory testing of poly(methyl methacrylate) samples
IEC 62494-1:2008	Medical electrical equipment - Exposure index of digital X-ray imaging systems - Part 1: Definitions and requirements for general radiography
ISO 14912:2003	Gas analysis — Conversion of gas mixture composition data
UNE-EN ISO 9614-3:2010	Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 3: Precision method for measurement by scanning (ISO 9614-3:2002)
IEC 62271-109:2008+AMD1:2013 CSV	High-voltage switchgear and controlgear - Part 109: Alternating-current series capacitor by-pass switches
BS EN 12470-2 : 2001	CLINICAL THERMOMETERS - PHASE CHANGE TYPE (DOT MATRIX) THERMOMETERS
ISO/TS 15530-3:2004	Geometrical Product Specifications (GPS) Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement Part 3: Use of calibrated workpieces or standards
ISO 20988:2007	Air quality Guidelines for estimating measurement uncertainty
UNE-CEN/TS 16011:2015 EX	Plastics - Recycled plastics - Sample preparation
ISO 12179:2000	Geometrical Product Specifications (GPS) Surface texture: Profile method Calibration of contact (stylus) instruments
ISO 15971:2008	Natural gas Measurement of properties Calorific value and Wobbe index
EN 60318-6:2008	Electroacoustics - Simulators of human head and ear - Part 6: Mechanical coupler for the measurement of bone vibrators
EN ISO 6145-10:2008	Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 10: Permeation method (ISO 6145-10:2002)
I.S. EN ISO 12179:2000	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD - CALIBRATION OF CONTACT (STYLUS) INSTRUMENTS
EN ISO 15796:2008	Gas analysis - Investigation and treatment of analytical bias (ISO 15796:2005)
EN ISO 4869-3:2007	Acoustics - Hearing protectors - Part 3: Measurement of insertion loss of ear-muff type protectors using an acoustic test fixture (ISO 4869-3:2007)
EN ISO 6145-1:2008	Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 1: Methods of calibration (ISO 6145-1:2003)
EN ISO 8655-6:2002/AC:2009	PISTON-OPERATED VOLUMETRIC APPARATUS - PART 6: GRAVIMETRIC METHODS FOR THE DETERMINATION OF MEASUREMENT ERROR (ISO 8655-6:2002/Cor 1:2008)
EN 15483:2008	Ambient air quality - Atmospheric measurements near ground with FTIR spectroscopy
EN ISO 6145-11:2008	Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 11: Electrochemical generation (ISO 6145-11:2005)
EN ISO 6145-4:2008	Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 4: Continuous syringe injection method (ISO 6145-4:2004)
EN ISO 20988:2007	Air quality - Guidelines for estimating measurement uncertainty (ISO 20988:2007)
EN ISO 14912:2006/AC:2007	GAS ANALYSIS - CONVERSION OF GAS MIXTURE COMPOSITION DATA (ISO 14912:2003/Cor 1:2006)
UNI EN ISO 5667-1 : 2007	WATER QUALITY - SAMPLING - PART 1: GUIDANCE ON THE DESIGN OF SAMPLING PROGRAMMES AND SAMPLING TECHNIQUES
EN ISO 5667-1 : 2006 COR 2007	WATER QUALITY - SAMPLING - PART 1: GUIDANCE ON THE DESIGN OF SAMPLING PROGRAMMES AND SAMPLING TECHNIQUES
I.S. EN ISO 14509-1:2008	SMALL CRAFT - AIRBORNE SOUND EMITTED BY POWERED RECREATIONAL CRAFT - PART 1: PASS-BY MEASUREMENT PROCEDURES
DIN EN ISO 6145-11:2008-11	GAS ANALYSIS - PREPARATION OF CALIBRATION GAS MIXTURES USING DYNAMIC VOLUMETRIC METHODS - PART 11: ELECTROCHEMICAL GENERATION
09/30169001 DC : 0	BS ISO 2425 - HYDROMETRY - MEASUREMENT OF LIQUID FLOW IN OPEN CHANNELS UNDER TIDAL CONDITIONS
BS EN ISO 9241-305:2008	Ergonomics of human-system interaction Optical laboratory test methods for electronic visual displays
I.S. EN ISO 16000-15:2008	INDOOR AIR - PART 15: SAMPLING STRATEGY FOR NITROGEN DIOXIDE (NO[2])
CEI EN 62494-1 : 2010	MEDICAL ELECTRICAL EQUIPMENT - EXPOSURE INDEX OF DIGITAL X-RAY IMAGING SYSTEMS - PART 1: DEFINITIONS AND REQUIREMENTS FOR GENERAL RADIOGRAPHY
CEI CLC/TR 50462 : 2009	RULES FOR THE DETERMINATION OF UNCERTAINTIES IN THE MEASUREMENT OF THE LOSSES ON POWER TRANSFORMERS AND REACTORS
16/30341847 DC : 0	BS EN 62321-8 - DETERMINATION OF CERTAIN SUBSTANCES IN ELECTROTECHNICAL PRODUCTS - PART 8: PHTHALATES IN POLYMERS BY GAS CHROMATOGRAPHY-MASS SPECTROMETRY (GC- MS), PYROLYSIS/THERMAL DESORPTION-GAS CHROMATOGRAPHY-MASS SPECTROMETRY (PY/TD-GC-MS)
I.S. EN 62058-21:2010	ELECTRICITY METERING EQUIPMENT (A.C.) - ACCEPTANCE INSPECTION - PART 21: PARTICULAR REQUIREMENTS FOR ELECTROMECHANICAL METERS FOR ACTIVE ENERGY (CLASSES 0,5, 1 AND 2 AND CLASS INDEXES A AND B)
08/30192849 DC : 0	BS ISO 5-2 - PHOTOGRAPHY AND GRAPHIC TECHNOLOGY - SPECTRAL DENSITY MEASUREMENTS - PART 2: GEOMETRIC CONDITIONS FOR TRANSMISSION DENSITY
10/30213842 DC : 0	BS EN ISO 11608-5 - NEEDLE-BASED INJECTION SYSTEMS FOR MEDICAL USE - REQUIREMENTS AND TEST METHODS - PART 5: AUTOMATED FUNCTIONS
I.S. EN 62369-1:2009	EVALUATION OF HUMAN EXPOSURE TO ELECTROMAGNETIC FIELDS FROM SHORT RANGE DEVICES (SRDS) IN VARIOUS APPLICATIONS OVER THE FREQUENCY RANGE 0 GHZ TO 300 GHZ - PART 1: FIELDS PRODUCED BY DEVICES USED FOR ELECTRONIC ARTICLE SURVEILLANCE, RADIO FREQUENCY IDENTIFICATION AND SIMILAR SYSTEMS
BS ISO 16702:2007	Workplace air quality. Determination of total organic isocyanate groups in air using 1-(2-methoxyphenyl) piperazine and liquid chromatography
DD CEN ISO/TS 25377:2007	Hydrometric uncertainty guide
DIN EN ISO 6145-10:2008-11	GAS ANALYSIS - PREPARATION OF CALIBRATION GAS MIXTURES USING DYNAMIC VOLUMETRIC METHODS - PART 10: PERMEATION METHOD
BS ISO 17183:2016	Soil quality. Screening soils for isopropanol-extractable organic compounds by determining emulsification index by light attenuation
BS EN 62321:2009	Electrotechnical products. Determination of levels of six regulated substances (lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls, polybrominated diphenyl ethers)
BS ISO 12789-1:2008	Reference radiation fields. Simulated workplace neutron fields Characteristics and methods of production
CSA C62301:2011	HOUSEHOLD ELECTRICAL APPLIANCES - MEASUREMENT OF STANDBY POWER
I.S. EN ISO 6145-11:2008	GAS ANALYSIS - PREPARATION OF CALIBRATION GAS MIXTURES USING DYNAMIC VOLUMETRIC METHODS - PART 11: ELECTROCHEMICAL GENERATION
CLC/TR 50462:2008	Rules for the determination of uncertainties in the measurement of the losses on power transformers and reactors
I.S. EN 60861:2008	EQUIPMENT FOR MONITORING OF RADIONUCLIDES IN LIQUID EFFLUENTS AND SURFACE WATERS
I.S. EN ISO 15971:2014	NATURAL GAS - MEASUREMENT OF PROPERTIES - CALORIFIC VALUE AND WOBBE INDEX (ISO 15971:2008)
UNI EN ISO 6145-10 : 2009	GAS ANALYSIS - PREPARATION OF CALIBRATION GAS MIXTURES USING DYNAMIC VOLUMETRIC METHODS - PART 10: PERMEATION METHOD
BS ISO 11843-5 : 2008	CAPABILITY OF DETECTION - PART 5: METHODOLOGY IN THE LINEAR AND NON-LINEAR CALIBRATION CASES
ISO/TS 19036:2006	Microbiology of food and animal feeding stuffs Guidelines for the estimation of measurement uncertainty for quantitative determinations
I.S. EN 62321:2009	ELECTROTECHNICAL PRODUCTS - DETERMINATION OF LEVELS OF SIX REGULATED SUBSTANCES (LEAD, MERCURY, CADMIUM, HEXAVALENT CHROMIUM, POLYBROMINATED BIPHENYLS, POLYBROMINATED DIPHENYL ETHERS)
UNE-EN ISO 15971:2014	Natural gas - Measurement of properties - Calorific value and Wobbe index (ISO 15971:2008)
I.S. EN ISO 17201-1:2005	ACOUSTICS - NOISE FROM SHOOTING RANGES - PART 1: DETERMINATION OF MUZZLE BLAST BY MEASUREMENT
I.S. EN 62127-3:2007	ULTRASONICS - HYDROPHONES - PART 3: PROPERTIES OF HYDROPHONES FOR ULTRASONIC FIELDS UP TO 40 MHZ (IEC 62127-3:2007 (EQV))
CEI EN 62058-31 : 2012	ELECTRICITY METERING EQUIPMENT (A.C.) - ACCEPTANCE INSPECTION - PART 31: PARTICULAR REQUIREMENTS FOR STATIC METERS FOR ACTIVE ENERGY (CLASSES 0,2 S, 0,5 S, 1 AND 2, AND CLASS INDEXES A, B AND C)
IEC 60601-2-5:2009	Medical electrical equipment - Part 2-5: Particular requirements for the basic safety and essential performance of ultrasonic physiotherapy equipment
ISO 12789-2:2008	Reference radiation fields — Simulated workplace neutron fields — Part 2: Calibration fundamentals related to the basic quantities
I.S. EN ISO 6145-1:2008	GAS ANALYSIS - PREPARATION OF CALIBRATION GAS MIXTURES USING DYNAMIC VOLUMETRIC METHODS - PART 1: METHODS OF CALIBRATION
ISO/TS 19101-2:2008	Geographic information Reference model Part 2: Imagery
I.S. EN ISO 9241-305:2009	ERGONOMICS OF HUMAN-SYSTEM INTERACTION - PART 305: OPTICAL LABORATORY TEST METHODS FOR ELECTRONIC VISUAL DISPLAYS
I.S. CEN ISO/TS 25377:2007	HYDROMETRIC UNCERTAINTY GUIDANCE (HUG)
I.S. EN 60318-6:2008	ELECTROACOUSTICS - SIMULATORS OF HUMAN HEAD AND EAR - PART 6: MECHANICAL COUPLER FOR THE MEASUREMENT OF BONE VIBRATORS
EN 62127-3:2007/A1:2013	ULTRASONICS - HYDROPHONES - PART 3: PROPERTIES OF HYDROPHONES FOR ULTRASONIC FIELDS UP TO 40 MHZ (IEC 62127-3:2007/A1:2013)
ISO 5667-1:2006	Water quality Sampling Part 1: Guidance on the design of sampling programmes and sampling techniques
BS EN ISO 12179:2001	Geometrical product specifications (GPS). Surface texture. Profile method. Calibration of contact (stylus) instruments
ISO 6145-4:2004	Gas analysis Preparation of calibration gas mixtures using dynamic volumetric methods Part 4: Continuous syringe injection method
BS EN ISO 8655-6:2002	Piston-operated volumetric apparatus Gravimetric methods for the determination of measurement error
ISO 9919:2005	Medical electrical equipment Particular requirements for the basic safety and essential performance of pulse oximeter equipment for medical use
ISO 8655-6:2002	Piston-operated volumetric apparatus Part 6: Gravimetric methods for the determination of measurement error
ISO 8041:2005	Human response to vibration Measuring instrumentation
EN 62220-1-3:2008	Medical electrical equipment - Characteristics of digital X-ray imaging devices - Part 1-3: Determination of the detective quantum efficiency - Detectors used in dynamic imaging
CEN ISO/TR 22007-5:2014	Plastics - Determination of thermal conductivity and thermal diffusivity - Part 5: Results of interlaboratory testing of poly(methyl methacrylate) samples (ISO/TR 22007-5:2011)
CEN/TS 16011:2013	Plastics - Recycled plastics - Sample preparation
CEN ISO/TS 15530-3:2007	Geometrical product specifications (GPS) - Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement - Part 3: Use of calibrated workpieces or standards (ISO/TS 15530-3:2004)
DIN EN ISO 20988:2007-09	AIR QUALITY - GUIDELINES FOR ESTIMATING MEASUREMENT UNCERTAINTY
EN 62471:2008	Photobiological safety of lamps and lamp systems
EN 60601-2-5:2015	Medical electrical equipment - Part 2-5: Particular requirements for the basic safety and essential performance of ultrasonic physiotherapy equipment
EN 62321:2009	Electrotechnical products - Determination of levels of six regulated substances (lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls, polybrominated diphenyl ethers)
EN 60861:2008	Equipment for monitoring of radionuclides in liquid effluents and surface waters
DIN EN ISO 4869-3:2007-09	Acoustics - Hearing protectors - Part 3: Measurement of insertion loss of ear-muff type protectors using an acoustic test fixture (ISO 4869-3:2007); German version EN ISO 4869-3:2007
EN 60068-3-11:2007	Environmental testing - Part 3-11: Supporting documentation and guidance - Calculation of uncertainty of conditions in climatic test chambers
EN 15305:2008/AC:2009	NON-DESTRUCTIVE TESTING - TEST METHOD FOR RESIDUAL STRESS ANALYSIS BY X-RAY DIFFRACTION

ISO Guide 35:2017	Reference materials Guidance for characterization and assessment of homogeneity and stability
ISO 5725:1986	Precision of test methods Determination of repeatability and reproducibility for a standard test method by inter-laboratory tests
ISO 3534-1:2006	Statistics — Vocabulary and symbols — Part 1: General statistical terms and terms used in probability