ISO/TR 15608:2017
Current
The latest, up-to-date edition.
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
English, French
01-02-2017
ISO/TR 15608:2017 provides guidelines for a uniform system for grouping materials for welding purposes. It can also be applied for other purposes, such as heat treatment, forming and non-destructive testing.
It covers grouping systems for the following standardized materials:
? steels;
? aluminium and its alloys;
? copper and its alloys;
? nickel and its alloys;
? titanium and its alloys;
? zirconium and its alloys;
? cast irons.
DocumentType |
Technical Report
|
Pages |
7
|
PublisherName |
International Organization for Standardization
|
Status |
Current
|
Supersedes |
Standards | Relationship |
SA/SNZ TR ISO 15608:2020 | Identical |
DIN CEN ISO/TR 15608:2020-07 | Identical |
DIN CEN ISO/TR 15608:2020-07 | Identical |
FD CEN ISO/TR 15608 : 2017 FD | Identical |
S.R. CEN ISO/TR 15608:2017 | Identical |
CEN ISO/TR 15608:2017 | Identical |
SIS-CEN ISO/TR 15608 : 2017 | Identical |
PD CEN ISO/TR 15608:2017 | Identical |
UNE-CEN ISO/TR 15608:2020 IN | Identical |
NEN NPR CEN ISO/TR 15608 : 2013 | Identical |
CR ISO 15608 : 2000 | Identical |
UNI CEN ISO/TR 15608 : 2012 | Identical |
UNE-CR ISO 15608:2003 | Identical |
DIN V 1738:2000-07 | Corresponds |
ONORM ONR CEN ISO/TR 15608 : 2018 | Identical |
PD CR ISO 15608:2000 | Identical |
DIN CEN ISO/TR 15608;DIN SPEC 8517:2013-08 | Identical |
I.S. CEN ISO TR 15608:2005 | Identical |
NEN NPR CR ISO 15608 : 2000 | Identical |
DIN SPEC 8517 : 2013 | Identical |
DIN-Fachbericht CEN ISO/TR 15608:2006-01 | Identical |
UNE-CEN ISO/TR 15608:2006 IN | Identical |
I.S. CR ISO 15608:2000 | Identical |
BS EN 1708-3:2012 | Welding. Basic weld joint details in steel Clad, buttered and lined pressurized components |
08/30184309 DC : DRAFT SEP 2008 | BS EN 12952-5 - WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 5: WORKMANSHIP AND CONSTRUCTION OF PRESSURE PARTS OF THE BOILER |
DIN EN ISO 17639 E : 2013 | DESTRUCTIVE TESTS ON WELDS IN METALLIC MATERIALS - MACROSCOPIC AND MICROSCOPIC EXAMINATION OF WELDS (ISO 17639:2003) |
14/30266380 DC : 0 | BS EN ISO 15614-8 - SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 8: WELDING OF TUBES TO TUBE-PLATE JOINTS |
15/30324507 DC : 0 | BS EN ISO 15618-1 - QUALIFICATION TESTING OF WELDERS FOR UNDERWATER WELDING - PART 1: DIVER-WELDERS FOR HYPERBARIC WET WELDING |
DIN EN 1011-2:2001-05 | WELDING - RECOMMENDATIONS FOR WELDING OF METALLIC MATERIALS - PART 2: ARC WELDING OF FERRITIC STEELS |
I.S. EN ISO 15614-2:2005 | SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 2: ARC WELDING OF ALUMINIUM AND ITS ALLOYS |
API 6DSS : 2017-08 | SPECIFICATION FOR SUBSEA PIPELINE VALVES |
DIN EN ISO 13585:2012-10 | Brazing - Qualification test of brazers and brazing operators (ISO 13585:2012) |
I.S. EN 287-1:2011 | QUALIFICATION TEST OF WELDERS - FUSION WELDING - PART 1: STEELS |
10/30216705 DC : 0 | BS EN 12953-2 - SHELL BOILERS - PART 2: MATERIALS FOR PRESSURE PARTS OF BOILERS AND ACCESSORIES |
13/30259076 DC : 0 | BS EN 13445-8 - UNFIRED PRESSURE VESSELS - PART 8: ADDITIONAL REQUIREMENTS FOR PRESSURE VESSELS OF ALUMINIUM AND ALUMINIUM ALLOYS |
BS EN 12693:2008 | Refrigerating systems and heat pumps. Safety and environmental requirements. Positive displacement refrigerant compressors |
CEN ISO/TR 20173:2009 | Welding - Grouping systems for materials - American materials (ISO/TR 20173:2009) |
DIN EN ISO 15614-14:2013-12 | SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 14: LASER-ARC HYBRID WELDING OF STEELS, NICKEL AND NICKEL ALLOYS (ISO 15614-14:2013) |
EN 13445-10:2015 | Unfired pressure vessels - Part 10: Additional requirements for pressure vessels of nickel and nickel alloys |
09/30211880 DC : 0 | BS EN 12732 - GAS INFRASTRUCTURE - WELDING STEEL PIPEWORK - FUNCTIONAL REQUIREMENTS |
I.S. EN ISO 15614-7:2016 | SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 7: OVERLAY WELDING |
DIN EN 1708-3:2012-05 | Welding - Basic weld joint details in steel - Part 3: Clad, buttered and lined pressurized components |
11/30235519 DC : 0 | BS EN ISO 15614-14 - SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 14: LASER-ARC HYBRID WELDING OF STEELS, NICKEL AND NICKEL ALLOYS |
PD CEN ISO/TR 20174:2005 | Welding. Grouping systems for materials. Japanese materials |
01/714474 DC : DRAFT NOV 2001 | BS EN 14276-1 - PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 1: VESSELS - GENERAL REQUIREMENTS |
11/30246678 DC : 0 | BS EN 13480-4 - METALLIC INDUSTRIAL PIPING - PART 4: FABRICATION AND INSTALLATION |
04/30125238 DC : DRAFT NOV 2004 | EN 15085-3 - RAILWAY APPLICATIONS - WELDING OF RAILWAY VEHICLES AND COMPONENTS - PART 3: DESIGN REQUIREMENTS |
10/30217107 DC : 0 | BS ISO 9606-1 - APPROVAL TESTING OF WELDERS - FUSION WELDING - PART 1: STEELS |
BS EN 13445-8 : 2014 | UNFIRED PRESSURE VESSELS - PART 8: ADDITIONAL REQUIREMENTS FOR PRESSURE VESSELS OF ALUMINIUM AND ALUMINIUM ALLOYS |
EN ISO 15609-2:2001/A1:2003 | SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE SPECIFICATION - PART 2: GAS WELDING |
PREN ISO 15614-13 : DRAFT 2010 | SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 13: RESISTANCE BUTT (UPSET) AND FLASH WELDING |
CEN ISO/TR 14745:2015 | Welding - Post-weld heat treatment parameters for steels (ISO/TR 14745:2015) |
BS EN 14917 : 2009 | METAL BELLOWS EXPANSION JOINTS FOR PRESSURE APPLICATIONS |
BS EN 1011-6:2005 | Welding. Recommendations for welding of metallic materials Laser beam welding |
ISO/TR 17671-3:2002 | Welding Recommendations for welding of metallic materials Part 3: Arc welding of stainless steels |
15/30320416 DC : 0 | BS EN 1090-2 - EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
PD CEN/TR 14585-3:2017 | Corrugated metal hose assemblies for pressure applications Design method |
UNE-EN ISO 9606-1:2017 | Qualification testing of welders - Fusion welding - Part 1: Steels (ISO 9606-1:2012 including Cor 1:2012 and Cor 2:2013) |
ISO 15614-2:2005 | Specification and qualification of welding procedures for metallic materials Welding procedure test Part 2: Arc welding of aluminium and its alloys |
EN 13445-3:2014/A4:2018 | UNFIRED PRESSURE VESSELS - PART 3: DESIGN |
I.S. EN 13480-2:2017 | METALLIC INDUSTRIAL PIPING - PART 2: MATERIALS |
I.S. EN ISO 15609-1:2004 | SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE SPECIFICATION - PART 1: ARC WELDING |
DIN EN 15085-2:2008-01 | RAILWAY APPLICATIONS - WELDING OF RAILWAY VEHICLES AND COMPONENTS - PART 2: QUALITY REQUIREMENTS AND CERTIFICATION OF WELDING MANUFACTURER |
UNI EN ISO 15609-1 : 2006 | SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE SPECIFICATION - PART 1: ARC WELDING |
BS EN 13480-5:2017 | Metallic industrial piping Inspection and testing |
BS EN 13480-2:2017 | Metallic industrial piping Materials |
DIN EN 1011-5:2003-10 | WELDING - RECOMMENDATIONS FOR WELDING OF METALLIC MATERIALS - PART 5: WELDING OF CLAD STEEL |
DIN EN 14532-1:2005-02 | WELDING CONSUMABLES - TEST METHODS AND QUALITY REQUIREMENTS - PART 1: PRIMARY METHODS AND CONFORMITY ASSESSMENT OF CONSUMABLES FOR STEEL, NICKEL AND NICKEL ALLOYS |
DIN EN 12732:2014-07 | Gas infrastructure - Welding steel pipework - Functional requirements (includes Amendment A1:2014) |
BS EN ISO 15614-5:2004 | Specification and qualification of welding procedures for metallic materials. Welding procedure test Arc welding of titanium, zirconium and their alloys |
DIN EN 14893:2014-09 | LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE LIQUEFIED PETROLEUM GAS (LPG) WELDED STEEL PRESSURE DRUMS WITH A CAPACITY BETWEEN 150 LITRES AND 1000 LITRES |
14/30278953 DC : 0 | BS ISO 17842-1 - SAFETY OF AMUSEMENT RIDES AND AMUSEMENT DEVICES - PART 1: DESIGN AND MANUFACTURE |
BS EN 1011-7:2004 | Welding. Recommendations for welding of metallic materials Electron beam welding |
DIN EN 13941:2003-10 | DESIGN AND INSTALLATION OF PREINSULATED BONDED PIPE SYSTEMS FOR DIRECT HEATING |
EN 1011-5:2003 | Welding - Recommendations for welding of metallic materials - Part 5: Welding of clad steel |
DIN EN ISO 14555:2017-10 | WELDING - ARC STUD WELDING OF METALLIC MATERIALS (ISO 14555:2017) |
EN 15085-3:2007/AC:2009 | RAILWAY APPLICATIONS - WELDING OF RAILWAY VEHICLES AND COMPONENTS - PART 3: DESIGN REQUIREMENTS |
EN 12952-2:2011 | Water-tube boilers and auxiliary installations - Part 2: Materials for pressure parts of boilers and accessories |
EN ISO 15614-13:2012 | Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 13: Upset (resistance butt) and flash welding (ISO 15614-13:2012) |
EN 12952-5:2011 | Water-tube boilers and auxiliary installations - Part 5: Workmanship and construction of pressure parts of the boiler |
EN 1011-2:2001/A1:2003 | WELDING - RECOMMENDATIONS FOR WELDING OF METALLIC MATERIALS - PART 2: ARC WELDING OF FERRITIC STEELS |
EN 1011-7:2004 | Welding - Recommendations for welding of metallic materials - Part 7: Electron beam welding |
DIN EN 1090-2:2011-10 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
UNI EN 12732 : 2014 | GAS INFRASTRUCTURE - WELDING STEEL PIPEWORK - FUNCTIONAL REQUIREMENTS |
EN 12693:2008 | Refrigerating systems and heat pumps - Safety and environmental requirements - Positive displacement refrigerant compressors |
EN 13480-4:2017 | Metallic industrial piping - Part 4: Fabrication and installation |
EN 12953-2:2012 | Shell boilers - Part 2: Materials for pressure parts of boilers and accessories |
I.S. EN 15085-4:2007 | RAILWAY APPLICATIONS - WELDING OF RAILWAY VEHICLES AND COMPONENTS - PART 4: PRODUCTION REQUIREMENTS |
I.S. EN 15085-3:2007 | RAILWAY APPLICATIONS - WELDING OF RAILWAY VEHICLES AND COMPONENTS - PART 3: DESIGN REQUIREMENTS |
DEFSTAN 02-875/1(2010) : 2010 | WELD OVERLAY CLADDING AND HARDFACING FOR NAVAL APPLICATIONS |
DEFSTAN 02-706/2(2010) : 2010 | WELDING & FABRICATION OF SHIP STRUCTURE FOR HM SUBMARINES AND SURFACE SHIPS NOT IN CLASS |
DIN EN 14917:2012-06 | Metal bellows expansion joints for pressure applications (includes Amendment A1:2012) |
14/30293465 DC : 0 | BS EN 13445-10 - UNFIRED PRESSURE VESSELS - PART 10: ADDITIONAL REQUIREMENTS FOR PRESSURE VESSELS OF NICKEL AND NICKEL ALLOYS |
PD CEN/TR 13445-101:2015 | Unfired pressure vessels. Example of application |
I.S. EN ISO 15614-1:2017 | SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 1: ARC AND GAS WELDING OF STEELS AND ARC WELDING OF NICKEL AND NICKEL ALLOYS (ISO 15614-1:2017, CORRECTED VERSION 2017-10-01) |
13/30248693 DC : 0 | BS EN 14893 - LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE LIQUEFIED PETROLEUM GAS (LPG) WELDED STEEL PRESSURE DRUMS WITH A CAPACITY BETWEEN 150 LITRES AND 1000 LITRES |
09/30186922 DC : 0 | BS EN ISO 13585 - BRAZING - BRAZER QUALIFICATION |
UNI EN 1708-3 : 2012 | WELDING - BASIC WELD JOINT DETAILS IN STEEL - PART 3: CLAD, BUTTERED AND LINED PRESSURIZED COMPONENTS |
16/30336476 DC : 0 | BS EN 287-6 - QUALIFICATION TEST OF WELDERS - FUSION WELDING - PART 6: CAST IRON |
16/30328759 DC : 0 | BS EN 13814-1 - SAFETY OF AMUSEMENT RIDES AND AMUSEMENT DEVICES - PART 1: DESIGN AND MANUFACTURE |
PREN 12732 : DRAFT 2009 | GAS INFRASTRUCTURE - WELDING STEEL PIPEWORK - FUNCTIONAL REQUIREMENTS |
PREN 13480-4 : DRAFT 2011 | METALLIC INDUSTRIAL PIPING - PART 4: FABRICATION AND INSTALLATION |
PREN 1090-2 : DRAFT 2015 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
PD CEN ISO/TR 3834-6:2007 | Quality requirements for fusion welding of metallic materials Guidelines on implementing ISO 3834 |
13/30266359 DC : 0 | BS EN ISO 15614-1 - SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 1: ARC AND GAS WELDING OF STEELS AND ARC WELDING OF NICKEL AND NICKEL ALLOYS |
I.S. EN 13445-2:2014 | UNFIRED PRESSURE VESSELS - PART 2: MATERIALS |
BS EN 13445-10:2015 | Unfired pressure vessels Additional requirements for pressure vessels of nickel and nickel alloys |
UNE-EN 1090-2:2011 | Execution of steel structures and aluminium structures - Part 2: Technical requirements for steel structures |
DIN EN 14893 E : 2014 | LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE LIQUEFIED PETROLEUM GAS (LPG) WELDED STEEL PRESSURE DRUMS WITH A CAPACITY BETWEEN 150 LITRES AND 1000 LITRES |
UNI EN ISO 17639 : 2013 | DESTRUCTIVE TESTS ON WELDS IN METALLIC MATERIALS - MACROSCOPIC AND MICROSCOPIC EXAMINATION OF WELDS |
PREN 764-4 : DRAFT 2012 | PRESSURE EQUIPMENT - PART 4: ESTABLISHMENT OF TECHNICAL DELIVERY CONDITIONS FOR METALLIC MATERIALS |
I.S. CEN ISO TR 20172:2006 | WELDING - GROUPING SYSTEMS FOR MATERIALS - EUROPEAN MATERIALS |
UNE-EN 16668:2016 | Industrial valves - Requirements and testing for metallic valves as pressure accessories |
BS EN 13445-3 : 2014 | UNFIRED PRESSURE VESSELS - PART 3: DESIGN |
I.S. EN 13445-8:2014 | UNFIRED PRESSURE VESSELS - PART 8: ADDITIONAL REQUIREMENTS FOR PRESSURE VESSELS OF ALUMINIUM AND ALUMINIUM ALLOYS |
I.S. EN 13445-10:2015 | UNFIRED PRESSURE VESSELS - PART 10: ADDITIONAL REQUIREMENTS FOR PRESSURE VESSELS OF NICKEL AND NICKEL ALLOYS |
BS EN 13445-2 : 2014 | UNFIRED PRESSURE VESSELS - PART 2: MATERIALS |
ISO/TR 17671-4:2002 | Welding Recommendations for welding of metallic materials Part 4: Arc welding of aluminium and aluminium alloys |
UNE-CEN ISO/TR 20173:2013 IN | Welding - Grouping systems for materials - American materials (ISO/TR 20173:2009) |
S.R. CEN ISO/TR 14745:2015 | WELDING - POST-WELD HEAT TREATMENT PARAMETERS FOR STEELS (ISO/TR 14745:2015) |
I.S. EN 13480-5:2017 | METALLIC INDUSTRIAL PIPING - PART 5: INSPECTION AND TESTING |
UNI EN ISO 15614-14 : 2013 | SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 14: LASER-ARC HYBRID WELDING OF STEELS, NICKEL AND NICKEL ALLOYS |
UNE-EN 13480-5:2017 | Metallic industrial piping - Part 5: Inspection and testing |
EN 13480-5:2017 | Metallic industrial piping - Part 5: Inspection and testing |
BS EN ISO 15614-1:2017 | Specification and qualification of welding procedures for metallic materials. Welding procedure test Arc and gas welding of steels and arc welding of nickel and nickel alloys |
UNI EN 1090-2 : 2011 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
EN 10088-1:2014 | Stainless steels - Part 1: List of stainless steels |
S.R. CEN ISO/TR 20173:2009 | WELDING - GROUPING SYSTEMS FOR MATERIALS - AMERICAN MATERIALS |
DIN EN 15085-4:2008-01 | Railway applications - Welding of railway vehicles and components - Part 4: Production requirements |
DIN EN ISO 15614-13:2012-10 | Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 13: Upset (resistance butt) and flash welding (ISO 15614-13:2012) |
DIN EN 1011-7:2004-10 | Welding - Recommendations for welding of metallic materials - Part 7: Electron beam welding |
DIN EN 1011-6:2006-03 | WELDING - RECOMMENDATION FOR WELDING OF METALLIC MATERIALS - PART 6: LASER BEAM WELDING |
DIN EN ISO 17642-3 E : 2005 | DESTRUCTIVE TESTS ON WELDS IN METALLIC MATERIALS - COLD CRACKING TESTS FOR WELDMENTS - ARC WELDING PROCESSES - PART 3: EXTERNALLY LOADED TESTS |
DIN EN ISO 15614-2:2005-07 | Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 2: Arc welding of aluminium and its alloys (ISO 15614-2:2005); German version EN ISO 15614-2:2005 |
UNE-EN 12542:2011 | LPG equipment and accessories - Static welded steel cylindrical tanks, serially produced for the storage of Liquefied Petroleum Gas (LPG) having a volume not greater than 13 m³ - Design and manufacture |
BS EN 14532-1:2004 | Welding consumables. Test methods and quality requirements Primary methods and conformity assessment of consumables for steel, nickel and nickel alloys |
BS EN 1011-5:2003 | Welding. Recommendations for welding of metallic materials Welding of clad steel |
BS EN 287-1:2011 | Qualification test of welders. Fusion welding Steels |
UNE-EN ISO 14555:2017 | Welding - Arc stud welding of metallic materials (ISO 14555:2017) |
I.S. EN 12542:2010 | LPG EQUIPMENT AND ACCESSORIES - STATIC WELDED STEEL CYLINDRICAL TANKS, SERIALLY PRODUCED FOR THE STORAGE OF LIQUEFIED PETROLEUM GAS (LPG) HAVING A VOLUME NOT GREATER THAN 13 M[3] - DESIGN AND MANUFACTURE |
I.S. EN ISO 15618-1:2016 | QUALIFICATION TESTING OF WELDERS FOR UNDERWATER WELDING - PART 1: HYPERBARIC WET WELDING (ISO 15618-1:2016) |
DIN EN 12542:2010-12 | LPG EQUIPMENT AND ACCESSORIES - STATIC WELDED STEEL CYLINDRICAL TANKS, SERIALLY PRODUCED FOR THE STORAGE OF LIQUEFIED PETROLEUM GAS (LPG) HAVING A VOLUME NOT GREATER THAN 13 M[3] - DESIGN AND MANUFACTURE |
DIN EN 10088-1:2014-12 | Stainless steels - Part 1: List of stainless steels; German version EN 10088-1:2014 |
I.S. EN 12953-2:2012 | SHELL BOILERS - PART 2: MATERIALS FOR PRESSURE PARTS OF BOILERS AND ACCESSORIES |
I.S. EN 13480-4:2017 | METALLIC INDUSTRIAL PIPING - PART 4: FABRICATION AND INSTALLATION |
I.S. EN 10088-1:2014 | STAINLESS STEELS - PART 1: LIST OF STAINLESS STEELS |
I.S. EN 12732:2013 | GAS INFRASTRUCTURE - WELDING STEEL PIPEWORK - FUNCTIONAL REQUIREMENTS |
I.S. EN ISO 14555:2017 | WELDING - ARC STUD WELDING OF METALLIC MATERIALS (ISO 14555:2017) |
I.S. EN 12952-2:2011 | WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 2: MATERIALS FOR PRESSURE PARTS OF BOILERS AND ACCESSORIES |
I.S. EN 14893:2014 | LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE LIQUEFIED PETROLEUM GAS (LPG) WELDED STEEL PRESSURE DRUMS WITH A CAPACITY BETWEEN 150 LITRES AND 1000 LITRES |
I.S. EN 13941:2009 | DESIGN AND INSTALLATION OF PREINSULATED BONDED PIPE SYSTEMS FOR DISTRICT HEATING |
I.S. EN 12952-5:2011 | WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 5: WORKMANSHIP AND CONSTRUCTION OF PRESSURE PARTS OF THE BOILER |
I.S. EN ISO 15614-13:2012 | SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 13: UPSET (RESISTANCE BUTT) AND FLASH WELDING (ISO 15614-13:2012) |
I.S. EN ISO 15614-8:2016 | SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 8: WELDING OF TUBES TO TUBE-PLATE JOINTS (ISO 15614-8:2016) |
I.S. EN 764-4:2014 | PRESSURE EQUIPMENT - PART 4: ESTABLISHMENT OF TECHNICAL DELIVERY CONDITIONS FOR METALLIC MATERIALS |
DIN EN 12732:2000-09 | GAS INFRASTRUCTURE - WELDING STEEL PIPEWORK - FUNCTIONAL REQUIREMENTS |
UNI EN 15085-3 : 2008 | RAILWAY APPLICATIONS - WELDING OF RAILWAY VEHICLES AND COMPONENTS - PART 3: DESIGN REQUIREMENTS |
UNI EN ISO 15613 : 2005 | SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - QUALIFICATION BASED ON PRE-PRODUCTION WELDING TEST |
UNE-EN ISO 15614-7:2017 | Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 7: Overlay welding (ISO 15614-7:2016) |
12/30260023 DC : 0 | BS EN 13480-8 - METALLIC INDUSTRIAL PIPING - PART 8: ADDITIONAL REQUIREMENTS FOR ALUMINIUM AND ALUMINIUM ALLOYS |
UNI EN 12693 : 2008 | REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - POSITIVE DISPLACEMENT REFRIGERANT COMPRESSORS |
00/708222 DC : DRAFT MAY 2000 | BS EN ISO 15614-1 SPECIFICATION AND APPROVAL OF WELDING PROCEDURES FOR METALLIC MATERIALS -WELDING PROCEDURE TEST - PART 1: ARC AND GAS WELDING OF STEELS AND ARC WELDING OF NICKEL AND NICKEL ALLOYS |
12/30259070 DC : 0 | BS EN 764-4 - PRESSURE EQUIPMENT - PART 4: ESTABLISHMENT OF TECHNICAL DELIVERY CONDITIONS FOR METALLIC MATERIALS |
BS PD EN ISO/TR 17844 : 2004 | WELDING - COMPARISON OF STANDARDIZED METHODS FOR THE AVOIDANCE OF COLD CRACKS |
02/710860 DC : DRAFT SEP 2002 | BS EN 14532-3 - WELDING CONSUMABLES - TEST METHODS AND QUALITY REQUIREMENTS - PART 3: CONFORMITY ASSESSMENT OF WIRE ELECTRODES, WIRES AND RODS FOR WELDING OF ALUMINIUM ALLOYS |
08/30184300 DC : DRAFT SEP 2008 | BS EN 12952-2 - WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 2: MATERIALS FOR PRESSURE PARTS OF BOILERS AND ACCESSORIES |
CEN ISO/TR 20172:2009 | Welding - Grouping systems for materials - European materials (ISO/TR 20172:2009) |
00/708223 DC : DRAFT MAY 2000 | BS EN ISO 15614-9 - SPECIFICATION AND APPROVAL OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 9: UNDERWATER HYPERBARIC WET WELDING |
UNI CEN ISO/TR 3834-6 : 2012 | QUALITY REQUIREMENTS FOR FUSION WELDING OF METALLIC MATERIALS - PART 6: GUIDELINES ON IMPLEMENTING ISO 3834 |
DD CEN/TS 14421:2006 | Hose tail and ferrule for crimping and swaging |
ISO/TR 20173:2009 | Welding Grouping systems for materials American materials |
10/30217417 DC : 0 | BS EN ISO 15614-13 - SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 13: RESISTANCE BUTT (UPSET) AND FLASH WELDING |
PD CEN ISO/TR 14745:2015 | Welding. Post-weld heat treatment parameters for steels |
07/30160966 DC : 0 | BS EN ISO 9606-1 - QUALIFICATION TEST OF WELDERS - FUSION WELDING - PART 1: STEELS |
BS EN ISO 15614-3:2008 | Specification and qualification of welding procedures for metallic materials. Welding procedure test Fusion welding of non-alloyed and low-alloyed cast irons |
PREN 13941 : DRAFT 2009 | DESIGN AND INSTALLATION OF REINSULATED BONDED PIPE SYSTEMS FOR DISTRICT HEATING |
05/30114218 DC : DRAFT FEB 2005 | EN 13480-8 - METALLIC INDUSTRIAL PIPING - PART 8: ADDITIONAL REQUIREMENTS FOR ALUMINIUM AND ALUMINIUM ALLOY PIPING |
PD CEN ISO/TR 20172:2009 | Welding. Grouping systems for materials. European materials |
DIN EN 14917 E : 2012 | METAL BELLOWS EXPANSION JOINTS FOR PRESSURE APPLICATIONS |
I.S. EN ISO 13585:2012 | BRAZING - QUALIFICATION TEST OF BRAZERS AND BRAZING OPERATORS (ISO 13585:2012) |
I.S. CEN ISO TR 20174:2006 | WELDING - GROUPING SYSTEMS FOR MATERIALS - JAPANESE MATERIALS |
I.S. EN 13445-3:2014 | UNFIRED PRESSURE VESSELS - PART 3: DESIGN |
PREN 287-6 : DRAFT 2016 | QUALIFICATION TEST OF WELDERS - FUSION WELDING - PART 6: CAST IRON |
UNI EN ISO 13585 : 2012 | BRAZING - QUALIFICATION TEST OF BRAZERS AND BRAZING OPERATORS |
PREN 287-1 : DRAFT 2010 | QUALIFICATION TEST OF WELDERS - FUSION WELDING - PART 1: STEELS |
UNE-EN 13445-10:2016 | Unfired pressure vessels - Part 10: Additional requirements for pressure vessels of nickel and nickel alloys |
I.S. CEN ISO TR 20173:2006 | WELDING - GROUPING SYSTEMS FOR MATERIALS - AMERICAN MATERIALS |
BS EN ISO 15614-7:2016 | Specification and qualification of welding procedures for metallic materials. Welding procedure test Overlay welding |
EN 13445-2:2014/A2:2018 | UNFIRED PRESSURE VESSELS - PART 2: MATERIALS |
DIN EN 1092-1:2016-05 (Draft) | FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 1: STEEL FLANGES |
I.S. EN ISO 15612:2004 | SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - QUALIFICATION BY ADOPTION OF A STANDARD WELDING PROCEDURE |
I.S. EN ISO 13918:2018 | WELDING - STUDS AND CERAMIC FERRULES FOR ARC STUD WELDING (ISO 13918:2017) |
PREN 13480-8 : DRAFT 2012 | METALLIC INDUSTRIAL PIPING - PART 8: ADDITIONAL REQUIREMENTS FOR ALUMINIUM AND ALUMINIUM ALLOYS |
BS EN 16668 : 2016 | INDUSTRIAL VALVES - REQUIREMENTS AND TESTING FOR METALLIC VALVES AS PRESSURE ACCESSORIES |
PREN 12542 : DRAFT 2016 | LPG EQUIPMENT AND ACCESSORIES - STATIC WELDED STEEL CYLINDRICAL TANKS, SERIALLY PRODUCED FOR THE STORAGE OF LIQUEFIED PETROLEUM GAS (LPG) HAVING A VOLUME NOT GREATER THAN 13 M[3] - DESIGN AND MANUFACTURE |
EN 1090-2:2008+A1:2011 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
UNE-EN 12952-5:2012 | Water-tube boilers and auxiliary installations - Part 5: Workmanship and construction of pressure parts of the boiler |
EN ISO 13918:2018 | Welding - Studs and ceramic ferrules for arc stud welding (ISO 13918:2017, Corrected version 2018-05) |
ISO/TR 10809-2:2011 | Cast irons Part 2: Welding |
DIN EN 1090-2:2015-07 (Draft) | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
BS EN 1090-2 : 2008 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
ISO 17842-1:2015 | Safety of amusement rides and amusement devices — Part 1: Design and manufacture |
ISO 15609-2:2001 | Specification and qualification of welding procedures for metallic materials Welding procedure specification Part 2: Gas welding |
I.S. EN 14917:2009 | METAL BELLOWS EXPANSION JOINTS FOR PRESSURE APPLICATIONS |
DIN EN ISO 15614-6 E : 2007 | SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 6: ARC AND GAS WELDING OF COPPER AND ITS ALLOYS |
DIN EN 14532-2:2005-02 | WELDING CONSUMABLES - TEST METHODS AND QUALITY REQUIREMENTS - PART 2: SUPPLEMENTARY METHODS AND CONFORMITY ASSESSMENT OF CONSUMABLES FOR STEEL, NICKEL AND NICKEL ALLOYS |
DIN EN 15085-3:2010-01 | Railway applications - Welding of railway vehicles and components - Part 3: Design requirements |
DIN EN ISO 15614-5 E : 2004 | SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 5: ARC WELDING OF TITANIUM, ZIRCONIUM AND THEIR ALLOYS |
DIN EN ISO 15609-1:2005-01 | SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE SPECIFICATION - PART 1: ARC WELDING |
DIN EN 287-1:2011-11 | QUALIFICATION TEST OF WELDERS - FUSION WELDING - PART 1: STEELS |
DIN EN ISO 17642-3:2005-09 | Destructive tests on welds in metallic materials - Cold cracking tests for weldments - Arc welding processes - Part 3: Externally loaded tests (ISO 17642-3:2005) |
BS EN 15085-2:2007 | Railway applications. Welding of railway vehicles and components Quality requirements and certification of welding manufacturer |
ISO/TR 20174:2005 | Welding Grouping systems for materials Japanese materials |
BS EN 15085-3:2007 | Railway applications. Welding of railway vehicles and components Design requirements |
UNE-EN 764-4:2015 | Pressure equipment - Part 4: Establishment of technical delivery conditions for metallic materials |
ISO 9606-1:2012 | Qualification testing of welders — Fusion welding — Part 1: Steels |
CEN ISO/TR 20174:2005 | Welding - Grouping systems for materials - Japanese materials (ISO/TR 20174:2005) |
EN 1011-6:2005 | Welding - Recommendation for welding of metallic materials - Part 6: Laser beam welding |
UNI EN 12542 : 2010 | LPG EQUIPMENT AND ACCESSORIES - STATIC WELDED STEEL CYLINDRICAL TANKS, SERIALLY PRODUCED FOR THE STORAGE OF LIQUEFIED PETROLEUM GAS (LPG) HAVING A VOLUME NOT GREATER THAN 13 MUE - DESIGN AND MANUFACTURE |
I.S. EN 15085-2:2007 | RAILWAY APPLICATIONS - WELDING OF RAILWAY VEHICLES AND COMPONENTS - PART 2: QUALITY REQUIREMENTS AND CERTIFICATION OF WELDING MANUFACTURER |
UNE-EN 287-1:2011 | Qualification test of welders - Fusion welding - Part 1: Steels |
EN 15085-2:2007 | Railway applications - Welding of railway vehicles and components - Part 2: Quality requirements and certification of welding manufacturer |
EN 12542:2010 | LPG equipment and accessories - Static welded steel cylindrical tanks, serially produced for the storage of Liquefied Petroleum Gas (LPG) having a volume not greater than 13 m³ - Design and manufacture |
EN ISO 15610:2003 | Specification and qualification of welding procedures for metallic materials - Qualification based on tested welding consumables (ISO 15610:2003) |
EN ISO 15613:2004 | Specification and qualification of welding procedures for metallic materials - Qualification based on pre-production welding test (ISO 15613:2004) |
EN 14532-3:2004 | Welding consumables - Test methods and quality requirements - Part 3: Conformity assessment of wire electrodes, wires and rods for welding of aluminium alloys |
EN ISO 17642-3:2005 | Destructive tests on welds in metallic materials - Cold cracking tests for weldments - Arc welding processes - Part 3: Externally loaded tests (ISO 17642-3:2005) |
EN 15085-4:2007 | Railway applications - Welding of railway vehicles and components - Part 4: Production requirements |
UNI EN ISO 15614-5 : 2005 | SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 5: ARC WELDING OF TITANIUM, ZIRCONIUM AND THEIR ALLOYS |
UNI EN 12952-5 : 2011 | WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 5: WORKMANSHIP AND CONSTRUCTION OF PRESSURE PARTS OF THE BOILER |
UNI EN ISO 15614-4 : 2006 | SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 4: FINISHING WELDING OF ALUMINIUM CASTINGS |
UNI EN 13941 : 2011 | DESIGN AND INSTALLATION OF PREINSULATED BONDED PIPE SYSTEMS FOR DISTRICT HEATING |
UNI EN ISO 15614-2 : 2006 | SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 2: ARC WELDING OF ALUMINIUM AND ITS ALLOYS |
UNI EN 12952-2 : 2011 | WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 2: MATERIALS FOR PRESSURE PARTS OF BOILERS AND ACCESSORIES |
UNI EN 14893 : 2014 | LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE LIQUEFIED PETROLEUM GAS (LPG) WELDED STEEL PRESSURE DRUMS WITH A CAPACITY BETWEEN 150 LITRES AND 1000 LITRES |
EN ISO 15618-1:2016 | Qualification testing of welders for underwater welding - Part 1: Hyperbaric wet welding (ISO 15618-1:2016) |
UNI EN 12953-2 : 2012 | SHELL BOILERS - PART 2: MATERIALS FOR PRESSURE PARTS OF BOILERS AND ACCESSORIES |
UNI EN ISO 9606-2 : 2006 | Qualification test of welders - Fusion welding - Part 1: Aluminium and aluminium alloys |
I.S. EN ISO 15614-4:2005 | SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 4: FINISHING WELDING OF ALUMINIUM CASTINGS |
UNI EN 10088-1 : 2014 | STAINLESS STEELS - PART 1: LIST OF STAINLESS STEELS |
UNI EN 287-1 : 2012 | QUALIFICATION TEST OF WELDERS - FUSION WELDING - PART 1: STEELS |
ONORM EN ISO 17639 : 2013 | DESTRUCTIVE TESTS ON WELDS IN METALLIC MATERIALS - MACROSCOPIC AND MICROSCOPIC EXAMINATION OF WELDS (ISO 17639:2003) |
16/30336084 DC : 0 | BS EN ISO 14555 - WELDING - ARC STUD WELDING OF METALLIC MATERIALS |
PD ISO/TR 10809-2:2011 | Cast irons Welding |
09/30186448 DC : 0 | BS EN 13941 - DESIGN AND INSTALLATION OF REINSULATED BONDED PIPE SYSTEMS FOR DISTRICT HEATING |
AWS D14.8M:2009 | STANDARD METHODS FOR THE AVOIDANCE OF COLD CRACKS |
16/30336440 DC : DRAFT MAR 2016 | BS EN 1092-1 - FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 1: STEEL FLANGES |
I.S. EN 1708-3:2012 | WELDING - BASIC WELD JOINT DETAILS IN STEEL - PART 3: CLAD, BUTTERED AND LINED PRESSURIZED COMPONENTS |
16/30335964 DC : 0 | BS EN ISO 15612 - SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - QUALIFICATION BY ADOPTION OF A STANDARD WELDING PROCEDURE SPECIFICATION |
13/30266377 DC : 0 | BS EN ISO 15614-7 - SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 7: OVERLAY WELDING |
16/30342991 DC : 0 | BS EN ISO 13918 - WELDING - STUDS AND CERAMIC FERRULES FOR ARC STUD WELDING |
PREN 12972 : DRAFT 2017 | TANKS FOR TRANSPORT OF DANGEROUS GOODS - TESTING, INSPECTION AND MARKING OF METALLIC TANKS |
BS EN ISO 15614-14:2013 | Specification and qualification of welding procedures for metallic materials. Welding procedure test Laser-arc hybrid welding of steels, nickel and nickel alloys |
02/710859 DC : DRAFT SEP 2002 | BS EN 14532-2 - WELDING CONSUMABLES - TEST METHODS AND QUALITY REQUIREMENTS - PART 2: SUPPLEMENTARY METHODS AND CONFORMITY ASSESSMENT OF CONSUMABLES FOR STEEL, NICKEL AND NICKEL ALLOYS |
UNI EN 14917 : 2012 | METAL BELLOWS EXPANSION JOINTS FOR PRESSURE APPLICATIONS |
DIN EN 13445-10:2016-05 | Unfired pressure vessels - Part 10: Additional requirements for pressure vessels of nickel and nickel alloys |
BS EN ISO 17639:2013 | Destructive tests on welds in metallic materials. Macroscopic and microscopic examination of welds |
03/115441 DC : DRAFT OCT 2003 | BS EN ISO 15614-6 - SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - ARC WELDING OF COPPER AND ITS ALLOYS |
DIN EN ISO 15614-7:2015-01 (Draft) | SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 7: OVERLAY WELDING (ISO 15614-7:2016) |
I.S. EN 287-6:2010 | QUALIFICATION TEST OF WELDERS - FUSION WELDING - PART 6: CAST IRON |
UNE-EN 13480-8:2017 | Metallic industrial piping - Part 8: Additional requirements for aluminium and aluminium alloy piping (Endorsed by Asociación Española de Normalización in September of 2019.) |
UNI EN 287-6 : 2010 | QUALIFICATION TEST OF WELDERS - FUSION WELDING - PART 6: CAST IRON |
BS EN ISO 9606-1:2017 | Qualification testing of welders. Fusion welding Steels |
ISO 13847:2013 | Petroleum and natural gas industries — Pipeline transportation systems — Welding of pipelines |
UNI EN ISO 15614-3 : 2008 | SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 3: FUSION WELDING OF NON-ALLOYED AND LOW-ALLOYED CAST IRONS |
DIN EN 287-6:2016-03 (Draft) | QUALIFICATION TEST OF WELDERS - FUSION WELDING - PART 6: CAST IRON |
I.S. EN ISO 17639:2013 | DESTRUCTIVE TESTS ON WELDS IN METALLIC MATERIALS - MACROSCOPIC AND MICROSCOPIC EXAMINATION OF WELDS (ISO 17639:2003) |
S.R. CEN/TR 14585-3:2017 | CORRUGATED METAL HOSE ASSEMBLIES FOR PRESSURE APPLICATIONS - PART 3: DESIGN METHOD |
BS EN ISO 15609-2:2001 | Specification and qualification of welding procedures for metallic materials. Welding procedure specification Gas welding |
ISO/TR 17671-2:2002 | Welding Recommendations for welding of metallic materials Part 2: Arc welding of ferritic steels |
UNI EN ISO 15612 : 2006 | SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - QUALIFICATION BY ADOPTION OF A STANDARD WELDING PROCEDURE |
UNI EN 1092-1 : 2013 | FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 1: STEEL FLANGES |
ISO/TR 14745:2015 | Welding Post-weld heat treatment parameters for steels |
UNE-EN ISO 15614-1:2018 | Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys (ISO 15614-1:2017, Corrected version 2017-10-01) |
17/30360691 DC : 0 | BS EN 12972 - TANKS FOR TRANSPORT OF DANGEROUS GOODS - TESTING, INSPECTION AND MARKING OF METALLIC TANKS |
I.S. CEN ISO TR 3834-6:2007 | QUALITY REQUIREMENTS FOR FUSION WELDING OF METALLIC MATERIALS - PART 6: GUIDELINES ON IMPLEMENTING ISO 3834 |
16/30326248 DC : 0 | BS EN 12542 - LPG EQUIPMENT AND ACCESSORIES - STATIC WELDED STEEL CYLINDRICAL TANKS, SERIALLY PRODUCED FOR THE STORAGE OF LIQUEFIED PETROLEUM GAS (LPG) HAVING A VOLUME NOT GREATER THAN 13 M[3] - DESIGN AND MANUFACTURE |
EN 13445-8 : 2014 COR 2017 | UNFIRED PRESSURE VESSELS - PART 8: ADDITIONAL REQUIREMENTS FOR PRESSURE VESSELS OF ALUMINIUM AND ALUMINIUM ALLOYS |
I.S. EN ISO 15614-3:2008 | SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 3: FUSION WELDING OF NON-ALLOYED AND LOW-ALLOYED CAST IRONS |
API 6D :2015 | SPECIFICATION FOR PIPELINE AND PIPING VALVES |
PREN 14893 : DRAFT 2013 | LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE LIQUEFIED PETROLEUM GAS (LPG) WELDED STEEL PRESSURE DRUMS WITH A CAPACITY BETWEEN 150 LITRES AND 1000 LITRES |
DIN EN 12693:2016-10 (Draft) | REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - POSITIVE DISPLACEMENT REFRIGERANT COMPRESSORS |
I.S. EN 12693:2008 | REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - POSITIVE DISPLACEMENT REFRIGERANT COMPRESSORS |
ISO 15614-7:2016 | Specification and qualification of welding procedures for metallic materials Welding procedure test Part 7: Overlay welding |
EN 287-6:2018 | Qualification test of welders - Fusion welding - Part 6: Cast irons |
I.S. CEN TS 14421:2006 | HOSE TAIL AND FERRULE FOR CRIMPING AND SWAGING |
I.S. EN 1011-6:2006 | WELDING - RECOMMENDATION FOR WELDING OF METALLIC MATERIALS - PART 6: LASER BEAM WELDING |
S.R. CEN ISO TR 20172:2009 | WELDING - GROUPING SYSTEMS FOR MATERIALS - EUROPEAN MATERIALS |
BS EN 13480-2:2017+A3:2018 | Metallic industrial piping Materials |
DIN EN 14532-3:2005-02 | WELDING CONSUMABLES - TEST METHODS AND QUALITY REQUIREMENTS - PART 3: CONFORMITY ASSESSMENT OF WIRE ELECTRODES, WIRES AND RODS FOR WELDING OF ALUMINIUM ALLOYS |
DIN EN ISO 15614-2 E : 2005 | SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 2: ARC WELDING OF ALUMINIUM AND ITS ALLOYS |
DIN EN 13831:2007-12 | Closed expansion vessels with built in diaphragm for installation in water |
BS EN 12284:2003 | Refrigerating systems and heat pumps. Valves. Requirements, testing and marking |
BS EN ISO 15613:2004 | Specification and qualification of welding procedures for metallic materials. Qualification based on pre-production welding test |
BS EN 12542:2010 | LPG equipment and accessories. Static welded steel cylindrical tanks, serially produced for the storage of liquefied petroleum gas (LPG) having a volume not greater than 13 m<sup>3</sup>. Design and manufacture |
ISO 15614-14:2013 | Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 14: Laser-arc hybrid welding of steels, nickel and nickel alloys |
BS ISO 17842-1:2015 | Safety of amusement rides and amusement devices Design and manufacture |
ISO 14555:2017 | Welding — Arc stud welding of metallic materials |
ISO 15614-13:2012 | Specification and qualification of welding procedures for metallic materials Welding procedure test Part 13: Upset (resistance butt) and flash welding |
BS EN 14532-2:2004 | Welding consumables. Test methods and quality requirements Supplementary mekthods and conformity assessment of consumables for steel, nickel and nickel alloys |
ISO 17642-3:2005 | Destructive tests on welds in metallic materials — Cold cracking tests for weldments — Arc welding processes — Part 3: Externally loaded tests |
ISO 15614-6:2006 | Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 6: Arc and gas welding of copper and its alloys |
ISO 15614-3:2008 | Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 3: Fusion welding of non-alloyed and low-alloyed cast irons |
BS EN ISO 9606-2:2004 | Qualification test of welders. Fusion welding Aluminium and aluminium alloys |
BS EN ISO 15618-2:2002 | Qualification testing of welders for under-water welding Diver-welders and welding operators for hyperbaric dry welding |
UNE-EN 12952-2:2012 | Water-tube boilers and auxiliary installations - Part 2: Materials for pressure parts of boilers and accessories |
BS EN 12952-5:2011 | Water-tube boilers and auxiliary installations Workmanship and construction of pressure parts of the boiler |
BS EN 13480-4:2017 | Metallic industrial piping Fabrication and installation |
ISO/TR 17844:2004 | Welding Comparison of standardised methods for the avoidance of cold cracks |
UNE-EN 12953-2:2013 | Shell boilers - Part 2: Materials for pressure parts of boilers and accessories |
UNE-EN ISO 15618-1:2017 | Qualification testing of welders for underwater welding - Part 1: Hyperbaric wet welding (ISO 15618-1:2016) |
UNE-EN ISO 15614-8:2016 | Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 8: Welding of tubes to tube-plate joints (ISO 15614-8:2016) |
UNE-EN 13480-4:2017 | Metallic industrial piping - Part 4: Fabrication and installation (Endorsed by Asociación Española de Normalización in September of 2019.) |
BS EN 764-4:2014 | Pressure equipment Establishment of technical delivery conditions for metallic materials |
ISO 13585:2012 | Brazing Qualification test of brazers and brazing operators |
UNE-EN ISO 15614-13:2013 | Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 13: Upset (resistance butt) and flash welding (ISO 15614-13:2012) |
BS EN 15085-4:2007 | Railway applications. Welding of railway vehicles and components Production requirements |
BS EN ISO 17642-3:2005 | Destructive tests on welds in metallic materials. Cold cracking tests for weldments. Arc welding processes Externally loaded tests |
BS EN ISO 15610:2003 | Specification and qualification of welding procedures for metallic materials. Qualification based on tested welding consumables |
ISO 15613:2004 | Specification and qualification of welding procedures for metallic materials Qualification based on pre-production welding test |
ISO 15618-2:2001 | Qualification testing of welders for underwater welding Part 2: Diver-welders and welding operators for hyperbaric dry welding |
BS EN ISO 15614-2:2005 | Specification and qualification of welding procedures for metallic materials. Welding procedure test Arc welding of aluminium and its alloys |
EN 13480-2:2017 | Metallic industrial piping - Part 2: Materials |
ISO 15614-4:2005 | Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 4: Finishing welding of aluminium castings |
ISO 17639:2003 | Destructive tests on welds in metallic materials Macroscopic and microscopic examination of welds |
BS EN 12732 : 2013 | GAS INFRASTRUCTURE - WELDING STEEL PIPEWORK - FUNCTIONAL REQUIREMENTS |
BS EN 13831:2007 | Closed expansion vessels with built-in diaphragm for installation in water |
BS EN 14532-3:2004 | Welding consumables. Test methods and quality requirements Conformity assessment of wire electrodes, wires and rods for welding of aluminium alloys |
UNE-EN 12732:2014+A1:2014 | Gas infrastructure - Welding steel pipework - Functional requirements |
BS EN ISO 15614-4:2005 | Specification and qualification of welding procedures for metallic materials. Welding procedure test Finishing welding of aluminium castings |
ISO 15618-1:2016 | Qualification testing of welders for underwater welding Part 1: Hyperbaric wet welding |
BS EN 13941 : 2009 | DESIGN AND INSTALLATION OF PREINSULATED BONDED PIPE SYSTEMS FOR DISTRICT HEATING |
BS EN ISO 15614-8:2016 | Specification and qualification of welding procedures for metallic materials. Welding procedure test Welding of tubes to tube-plate joints |
BS EN ISO 14555:2017 | Welding. Arc stud welding of metallic materials |
EN ISO 15618-2:2001 | Qualification testing of welders for under-water welding - Part 2: Diver-welders and welding operators for hyperbaric dry welding (ISO 15618-2:2001) |
EN 14893:2014 | LPG equipment and accessories - Transportable Liquefied Petroleum Gas (LPG) welded steel pressure drums with a capacity between 150 litres and 1 000 litres |
EN ISO 9606-1:2017 | Qualification testing of welders - Fusion welding - Part 1: Steels (ISO 9606-1:2012 including Cor 1:2012 and Cor 2:2013) |
EN ISO 14555:2017 | Welding - Arc stud welding of metallic materials (ISO 14555:2017) |
EN 287-1:2011 | Qualification test of welders - Fusion welding - Part 1: Steels |
EN 13941:2009+A1:2010 | Design and installation of preinsulated bonded pipe systems for district heating |
EN 14532-1:2004 | Welding consumables - Test methods and quality requirements - Part 1: Primary methods and conformity assessment of consumables for steel, nickel and nickel alloys |
EN ISO 15614-2:2005 | Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 2: Arc welding of aluminium and its alloys (ISO 15614-2:2005) |
EN 14532-2:2004 | Welding consumables - Test methods and quality requirements - Part 2: Supplementary methods and conformity assessment of consumables for steel, nickel and nickel alloys |
EN ISO 15609-1:2004 | Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 1: Arc welding (ISO 15609-1:2004) |
EN ISO 15614-3:2008 | Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 3: Fusion welding of non-alloyed and low-alloyed cast irons (ISO 15614-3:2008) |
EN ISO 9606-2:2004 | Qualification test of welders - Fusion welding - Part 2: Aluminium and aluminium alloys (ISO 9606-2:2004) |
EN ISO/TR 17844 : 2004 | WELDING - COMPARISON OF STANDARDISED METHODS FOR THE AVOIDANCE OF COLD CRACKS |
EN 1708-3:2012 | Welding - Basic weld joint details in steel - Part 3: Clad, buttered and lined pressurized components |
EN ISO 15614-14:2013 | Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 14: Laser-arc hybrid welding of steels, nickel and nickel alloys (ISO 15614-14:2013) |
EN ISO 15614-8:2016 | Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 8: Welding of tubes to tube-plate joints (ISO 15614-8:2016) |
EN ISO 15614-6:2006 | Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 6: Arc and gas welding of copper and its alloys (ISO 15614-6:2006) |
EN 13831:2007 | Closed expansion vessels with built in diaphragm for installation in water |
EN ISO 15614-5:2004 | Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 5: Arc welding of titanium, zirconium and their alloys (ISO 15614-5:2004) |
EN ISO 15614-4:2005/AC:2007 | SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 4: FINISHING WELDING OF ALUMINIUM CASTINGS |
EN 764-4:2014 | Pressure equipment - Part 4: Establishment of technical delivery conditions for metallic materials |
PREN 10253-2 : DRAFT 2017 | BUTT-WELDING PIPE FITTINGS - PART 2: NON ALLOY AND FERRITIC ALLOY STEELS WITH SPECIFIC INSPECTION REQUIREMENTS |
05/30114324 DC : DRAFT FEB 2005 | EN ISO 14555 - WELDING - ARC STUD WELDING OF METALLIC MATERIALS |
UNE-EN 14893:2014 | LPG equipment and accessories - Transportable Liquefied Petroleum Gas (LPG) welded steel pressure drums with a capacity between 150 litres and 1 000 litres |
10/30235392 DC : 0 | BS EN 287-1 - QUALIFICATION TEST OF WELDERS - FUSION WELDING - PART 1: STEELS |
ISO 13918:2017 | Welding — Studs and ceramic ferrules for arc stud welding |
12/30257658 DC : 0 | BS EN ISO 14555 - WELDING - ARC STUD WELDING OF METALLIC MATERIALS |
PREN ISO 15614-6 : DRAFT 2003 | SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 6: ARC WELDING OF COPPER AND ITS ALLOYS |
CEN/TR 14585-3:2017 | Corrugated metal hose assemblies for pressure applications - Part 3: Design method |
I.S. EN ISO 9606-2:2005 | QUALIFICATION TEST OF WELDERS - FUSION WELDING - PART 2: ALUMINIUM AND ALUMINIUM ALLOYS |
15/30317351 DC : 0 | BS EN 13480-8:2012/A2 - METALLIC INDUSTRIAL PIPING - PART 8: ADDITIONAL REQUIREMENTS FOR ALUMINIUM AND ALUMINIUM ALLOY PIPING |
DIN EN ISO 15614-3 E : 2008 | SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 3: FUSION WELDING OF NON-ALLOYED AND LOW-ALLOYED CAST IRONS |
BS EN ISO 13585:2012 | Brazing. Qualification test of brazers and brazing operators |
17/30351224 DC : 0 | BS EN 14276-1 - PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 1: VESSELS - GENERAL REQUIREMENTS |
02/710858 DC : DRAFT SEP 2002 | BS EN 14532-1 - WELDING CONSUMABLES - TEST METHODS AND QUALITY REQUIREMENTS - PART 1: PRIMARY METHODS AND CONFORMITY ASSESSMENT OF CONSUMABLES FOR STEEL, NICKEL AND NICKEL ALLOYS |
S.R. CEN ISO/TR 20172:2021 | Welding - Grouping systems for materials - European materials (ISO/TR 20172:2021) |
11/30254165 DC : 0 | BS EN 10088-1 - STAINLESS STEELS - PART 1: LIST OF STAINLESS STEELS |
DIN EN 13445-10 E : 2016 | UNFIRED PRESSURE VESSELS - PART 10: ADDITIONAL REQUIREMENTS FOR PRESSURE VESSELS OF NICKEL AND NICKEL ALLOYS |
DIN EN ISO 17639:2013-12 | Destructive tests on welds in metallic materials - Macroscopic and microscopic examination of welds (ISO 17639:2003) |
PREN 13445-8 : DRAFT 2013 | UNFIRED PRESSURE VESSELS - PART 8: ADDITIONAL REQUIREMENTS FOR PRESSURE VESSELS OF ALUMINIUM AND ALUMINIUM ALLOYS |
PREN 14276-1 : DRAFT 2017 | PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 1: VESSELS - GENERAL REQUIREMENTS |
I.S. EN ISO 9606-1:2017 | QUALIFICATION TESTING OF WELDERS - FUSION WELDING - PART 1: STEELS (ISO 9606-1:2012 INCLUDING COR 1:2012 AND COR 2:2013) |
I.S. EN 1090-2:2008 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
S.R. CEN/TR 13445-101:2015 | UNFIRED PRESSURE VESSELS - PART 101: EXAMPLE OF APPLICATION |
UNE-EN 13445-2:2015 | Unfired pressure vessels - Part 2: Materials |
ISO/TR 17671-6:2005 | Welding Recommendations for welding of metallic materials Part 6: Laser beam welding |
EN 14917:2009+A1:2012 | Metal bellows expansion joints for pressure applications |
UNE-EN ISO 15614-14:2014 | Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 14: Laser-arc hybrid welding of steels, nickel and nickel alloys (ISO 15614-14:2013) |
UNE-EN 13445-8:2015 | Unfired pressure vessels - Part 8: Additional requirements for pressure vessels of aluminium and aluminium alloys |
I.S. EN ISO 15614-14:2013 | SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 14: LASER-ARC HYBRID WELDING OF STEELS, NICKEL AND NICKEL ALLOYS (ISO 15614-14:2013) |
UNI CEN ISO/TR 17844 : 2012 | WELDING - COMPARISON OF STANDARDISED METHODS FOR THE AVOIDANCE OF COLD CRACKS |
DIN EN 1011-3:2001-01 | WELDING - RECOMMENDATIONS FOR WELDING OF METALLIC - MATERIALS - PART 3: ARC WELDING OF STAINLESS STEELS |
UNI EN 13445-8 : 2015 | UNFIRED PRESSURE VESSELS - PART 8: ADDITIONAL REQUIREMENTS FOR PRESSURE VESSELS OF ALUMINIUM AND ALUMINIUM ALLOYS |
BS EN 1011-3:2000 | Welding. Recommendations for welding of metallic materials Arc welding of stainless steels |
PREN 10088-1 : DRAFT 2011 | STAINLESS STEELS - PART 1: LIST OF STAINLESS STEELS |
CEN/TR 13445-101:2015 | Unfired pressure vessels - Example of application |
UNE-EN 14917:2011 | Metal bellows expansion joints for pressure applications |
PD CEN ISO/TR 20173:2009 | Welding. Grouping systems for materials. American materials |
ISO/TR 3834-6:2007 | Quality requirements for fusion welding of metallic materials — Part 6: Guidelines on implementing ISO 3834 |
ISO 15614-1:2017 | Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys |
DIN EN 764-4:2015-03 | PRESSURE EQUIPMENT - PART 4: ESTABLISHMENT OF TECHNICAL DELIVERY CONDITIONS FOR METALLIC MATERIALS |
DIN EN 12953-2:2012-05 | Shell boilers - Part 2: Materials for pressure parts of boilers and accessories |
DIN EN 12952-2:2011-10 | Water-tube boilers and auxiliary installations - Part 2: Materials for pressure parts of boilers and accessories |
DIN EN 12952-5:2012-01 | Water-tube boilers and auxiliary installations - Part 5: Workmanship and construction of pressure parts of the boiler |
ISO 9606-2:2004 | Qualification test of welders — Fusion welding — Part 2: Aluminium and aluminium alloys |
BS EN ISO 15614-6:2006 | Specification and qualification of welding procedures for metallic materials. Welding procedure test Arc and gas welding of copper and its alloys |
UNE-EN 10088-1:2015 | Stainless steels - Part 1: List of stainless steels |
BS EN 12953-2:2012 | Shell boilers Materials for pressure parts of boilers and accessories |
BS EN 14893:2014 | LPG equipment and accessories. Transportable Liquefied Petroleum Gas (LPG) welded steel pressure drums with a capacity between 150 litres and 1 000 litres |
BS EN ISO 15618-1:2016 | Qualification testing of welders for underwater welding Hyperbaric wet welding |
BS EN 10088-1:2014 | Stainless steels List of stainless steels |
BS EN ISO 15614-13:2012 | Specification and qualification of welding procedures for metallic materials. Welding procedure test Upset (resistance butt) and flash welding |
ISO 15614-8:2016 | Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 8: Welding of tubes to tube-plate joints |
BS EN 12952-2:2011 | Water-tube boilers and auxiliary installations Materials for pressure parts of boilers and accessories |
BS EN 1011-4:2000 | Welding. Recommendations for welding of metallic materials Arc welding of aluminium and aluminium alloys |
ISO/TR 20172:2009 | Welding Grouping systems for materials European materials |
BS EN 1011-2:2001 | Welding. Recommendations for welding of metallic materials Arc welding of ferritic steels |
DIN EN 12693:2008-09 | REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - POSITIVE DISPLACEMENT REFRIGERANT COMPRESSORS |
CEN ISO/TR 3834-6:2007 | Quality requirements for fusion welding of metallic materials - Part 6: Guidelines on implementing ISO 3834 (ISO/TR 3834-6:2007) |
CEN/TS 14421 : 2006 | HOSE TAIL AND FERRULE FOR CRIMPING AND SWAGING |
EN ISO 13585:2012 | Brazing - Qualification test of brazers and brazing operators (ISO 13585:2012) |
DIN EN ISO 15614-3:2008-06 | SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 3: FUSION WELDING OF NON-ALLOYED AND LOW-ALLOYED CAST IRONS |
EN 12284 : 2003 | REFRIGERATING SYSTEMS AND HEAT PUMPS - VALVES - REQUIREMENTS, TESTING AND MARKING |
DIN EN ISO 15614-5:2004-07 | Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 5: Arc welding of titanium, zirconium and their alloys (ISO 15614-5:2004) |
DIN EN ISO 15614-6:2007-01 | Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 6: Arc and gas welding of copper and its alloys (ISO 15614-6:2006) |
EN ISO 17639:2013 | Destructive tests on welds in metallic materials - Macroscopic and microscopic examination of welds (ISO 17639:2003) |
DIN EN ISO 15613:2004-09 | Specification and qualification of welding procedures for metallic materials - Qualification based on pre-production welding test (ISO 15613:2004) |
DIN EN 287-1:2004-05 | QUALIFICATION TEST OF WELDERS - FUSION WELDING - PART 1: STEELS |
EN 12732:2013+A1:2014 | Gas infrastructure - Welding steel pipework - Functional requirements |
UNI EN ISO 15614-13 : 2012 | SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 13: UPSET (RESISTANCE BUTT) AND FLASH WELDING |
UNE-EN 13480-2:2017 | Metallic industrial piping - Part 2: Materials (Endorsed by Asociación Española de Normalización in September of 2019.) |
UNE-EN 12732:2014 | Gas infrastructure - Welding steel pipework - Functional requirements |
ISO/TR 20172:2009 | Welding Grouping systems for materials European materials |
AS/NZS ISO 13918:2020 | Welding - Studs and ceramic ferrules for arc stud welding |
ISO/TR 20173:2009 | Welding Grouping systems for materials American materials |
AS/NZS 2205.5.1:2019 | Methods for destructive testing of welds in metal Macroscopic and microscopic examination of welds |
ISO/TR 20174:2005 | Welding Grouping systems for materials Japanese materials |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.