Customer Support: 131 242

  • There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

ISO/TR 22100-3:2016

Current
Current

The latest, up-to-date edition.

Safety of machinery Relationship with ISO 12100 Part 3: Implementation of ergonomic principles in safety standards
Available format(s)

Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users

Language(s)

English

Published date

21-09-2016

ISO/TR 22100-3:2016 describes the main ergonomic risk factors influencing the safety of machinery and gives a framework for incorporating them into the design of machines by the integration of important ergonomic principles relating to:

- avoiding stressful postures and movements during use of the machine;

- designing machines, and more especially hand-held and mobile machines, which can be operated easily;

- avoiding as far as possible noise, vibration, thermal effects;

NOTE 1: The health effects of noise, vibration and adverse thermal conditions are well-known and are not addressed here. However environmental factors can interact with machine design and risks arising from such influences are addressed in this document.

? avoiding linking the operator's working rhythm to an automatic succession of cycles;

? providing local lighting on or in the machine;

NOTE 2: Lighting of the machine or of the surrounding workplace by the machine can have a significant impact on the safety of machine operation and this risk is addressed by this document.

- selecting, locating and identifying manual controls (actuators) so that they are clearly visible and identifiable and appropriately marked where necessary;

- selecting, designing and locating indicators, dials and visual display units.

The approach is based on ISO 12100 with its iterative process to identify significant hazards and reduce risks.

Relevant steps of this iterative process have been adapted to include ergonomic principles, and practical guidance is given to apply standards dealing with ergonomics which are relevant for machinery design.

ISO/TR 22100-3:2016 is intended for use by standards writers and designers of machinery. It can be used when no relevant C-type standards are available.

DocumentType
Technical Report
Pages
39
PublisherName
International Organization for Standardization
Status
Current

DGUV INFORMATION 209-068 : 2010
EN 1005-4:2005+A1:2008 Safety of machinery - Human physical performance - Part 4: Evaluation of working postures and movements in relation to machinery
ISO 15265:2004 Ergonomics of the thermal environment Risk assessment strategy for the prevention of stress or discomfort in thermal working conditions
ISO 10075-2:1996 Ergonomic principles related to mental workload Part 2: Design principles
ISO 9241-400:2007 Ergonomics of humansystem interaction Part 400: Principles and requirements for physical input devices
ISO 11226:2000 Ergonomics — Evaluation of static working postures
EN 894-3:2000+A1:2008 Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 3: Control actuators
EN 13557:2003+A2:2008 Cranes - Controls and control stations
EN 12464-1:2011 Light and lighting - Lighting of work places - Part 1: Indoor work places
ISO 14119:2013 Safety of machinery Interlocking devices associated with guards Principles for design and selection
ISO 9241-110:2006 Ergonomics of human-system interaction Part 110: Dialogue principles
EN 547-2:1996+A1:2008 Safety of machinery - Human body measurements - Part 2: Principles for determining the dimensions required for access openings
ISO 9921:2003 Ergonomics Assessment of speech communication
ISO 11228-3:2007 Ergonomics Manual handling Part 3: Handling of low loads at high frequency
ISO 28803:2012 Ergonomics of the physical environment — Application of International Standards to people with special requirements
ISO 11161:2007 Safety of machinery — Integrated manufacturing systems — Basic requirements
ANSI B11 TR1 : 2004 ERGONOMIC GUIDELINES FOR THE DESIGN, INSTALLATION AND USE OF MACHINE TOOLS
ISO/TR 12295:2014 Ergonomics Application document for International Standards on manual handling (ISO 11228-1, ISO 11228-2 and ISO 11228-3) and evaluation of static working postures (ISO 11226)
IEC 61310-2:2007 Safety of machinery - Indication, marking and actuation - Part 2: Requirements for marking
EN 981:1996+A1:2008 Safety of machinery - System of auditory and visual danger and information signals
EN 894-2:1997+A1:2008 Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 2: Displays
ISO 11228-2:2007 Ergonomics Manual handling Part 2: Pushing and pulling
IEC 60073:2002 Basic and safety principles for man-machine interface, marking and identification - Coding principles for indicators and actuators
ISO 3411:2007 Earth-moving machinery Physical dimensions of operators and minimum operator space envelope
ISO/TR 9241-100:2010 Ergonomics of human-system interaction — Part 100: Introduction to standards related to software ergonomics
ISO 9241-210:2010 Ergonomics of human-system interaction Part 210: Human-centred design for interactive systems
ISO 13732-1:2006 Ergonomics of the thermal environment — Methods for the assessment of human responses to contact with surfaces — Part 1: Hot surfaces
ISO 5353:1995 Earth-moving machinery, and tractors and machinery for agriculture and forestry Seat index point
EN 614-2:2000+A1:2008 Safety of machinery - Ergonomic design principles - Part 2: Interactions between the design of machinery and work tasks
ISO 9241-12:1998 Ergonomic requirements for office work with visual display terminals (VDTs) Part 12: Presentation of information
EN 1837:1999+A1:2009 Safety of machinery - Integral lighting of machines
ISO 9355-1:1999 Ergonomic requirements for the design of displays and control actuators — Part 1: Human interactions with displays and control actuators
IEC 60204-1:2016 Safety of machinery - Electrical equipment of machines - Part 1: General requirements
ISO 14738:2002 Safety of machinery — Anthropometric requirements for the design of workstations at machinery
EN 547-1:1996+A1:2008 Safety of machinery - Human body measurements - Part 1: Principles for determining the dimensions required for openings for whole body access into machinery
EN 1005-1:2001+A1:2008 Safety of machinery - Human physical performance - Part 1: Terms and definitions
EN 1005-2:2003+A1:2008 Safety of machinery - Human physical performance - Part 2: Manual handling of machinery and component parts of machinery
ISO 11064-4:2013 Ergonomic design of control centres — Part 4: Layout and dimensions of workstations
IEC 61310-3:2007 Safety of machinery - Indication, marking and actuation - Part 3: Requirements for the location and operation of actuators
ISO 11064-5:2008 Ergonomic design of control centres — Part 5: Displays and controls
ISO/TS 13732-2:2001 Ergonomics of the thermal environment — Methods for the assessment of human responses to contact with surfaces — Part 2: Human contact with surfaces at moderate temperature
EN 13586:2004+A1:2008 Cranes - Access
EN 614-1:2006+A1:2009 Safety of machinery - Ergonomic design principles - Part 1: Terminology and general principles
ISO 12100:2010 Safety of machinery — General principles for design — Risk assessment and risk reduction
ISO 11064-6:2005 Ergonomic design of control centres Part 6: Environmental requirements for control centres
ISO 7731:2003 Ergonomics Danger signals for public and work areas Auditory danger signals
ISO/TR 14121-2:2012 Safety of machinery — Risk assessment — Part 2: Practical guidance and examples of methods
CR 1030-1 : 1995 HAND-ARM VIBRATION - GUIDELINES FOR VIBRATION HAZARDS REDUCTION - PART 1: ENGINEERING METHODS BY DESIGN OF MACHINERY
ISO 26800:2011 Ergonomics — General approach, principles and concepts
ISO 2860:1992 Earth-moving machinery — Minimum access dimensions
IEC 60447:2004 Basic and safety principles for man-machine interface, marking and identification - Actuating principles
ISO 11429:1996 Ergonomics System of auditory and visual danger and information signals
CEN/TR 614-3:2010 Safety of machinery - Part 3: Ergonomic principles for the design of mobile machinery
ISO 15534-3:2000 Ergonomic design for the safety of machinery — Part 3: Anthropometric data
ISO 10075-3:2004 Ergonomic principles related to mental workload Part 3: Principles and requirements concerning methods for measuring and assessing mental workload
ISO 7250-1:2017 Basic human body measurements for technological design — Part 1: Body measurement definitions and landmarks
EN 953:1997+A1:2009 Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards
EN 842:1996+A1:2008 Safety of machinery - Visual danger signals - General requirements, design and testing
ISO 21281:2005 Construction and layout of pedals of self-propelled sit-down rider-controlled industrial trucks Rules for the construction and layout of pedals
EN 547-3:1996+A1:2008 Safety of machinery - Human body measurements - Part 3: Anthropometric data
ISO 1503:2008 Spatial orientation and direction of movement — Ergonomic requirements
DGUV INFORMATION 209-069 : 2010 ERGONOMISCHE MASCHINENGESTALTUNG VON WERKZEUGMASCHINEN DER METALLBEARBEITUNG
ISO 9355-3:2006 Ergonomic requirements for the design of displays and control actuators — Part 3: Control actuators
ISO 11428:1996 Ergonomics Visual danger signals General requirements, design and testing
EN 12464-2:2014 Light and lighting - Lighting of work places - Part 2: Outdoor work places
ISO 13857:2008 Safety of machinery Safety distances to prevent hazard zones being reached by upper and lower limbs
EN 13490:2001+A1:2008 Mechanical vibration - Industrial trucks - Laboratory evaluation and specification of operator seat vibration
ISO/IEC Guide 71:2014 Guide for addressing accessibility in standards
ISO 11064-3:1999 Ergonomic design of control centres — Part 3: Control room layout
ISO 11399:1995 Ergonomics of the thermal environment Principles and application of relevant International Standards
ISO 15535:2012 General requirements for establishing anthropometric databases
ISO 11064-1:2000 Ergonomic design of control centres Part 1: Principles for the design of control centres
ISO 15534-1:2000 Ergonomic design for the safety of machinery — Part 1: Principles for determining the dimensions required for openings for whole-body access into machinery
IEC 61310-1:2007 Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual, acoustic and tactile signals
ISO/TR 22411:2008 Ergonomics data and guidelines for the application of ISO/IEC Guide 71 to products and services to address the needs of older persons and persons with disabilities
ISO 7250-3:2015 Basic human body measurements for technological design — Part 3: Worldwide and regional design ranges for use in product standards
ISO 4254-1:2013 Agricultural machinery — Safety — Part 1: General requirements
EN 1005-3:2002+A1:2008 Safety of machinery - Human physical performance - Part 3: Recommended force limits for machinery operation
ISO 9241-300:2008 Ergonomics of human-system interaction — Part 300: Introduction to electronic visual display requirements
ISO 15536-1:2005 Ergonomics Computer manikins and body templates Part 1: General requirements
ISO 13732-3:2005 Ergonomics of the thermal environment Methods for the assessment of human responses to contact with surfaces Part 3: Cold surfaces
ISO 15537:2004 Principles for selecting and using test persons for testing anthropometric aspects of industrial products and designs
ISO 11228-1:2003 Ergonomics Manual handling Part 1: Lifting and carrying
ISO 20282-1:2006 Ease of operation of everyday products Part 1: Design requirements for context of use and user characteristics
ISO 2867:2011 Earth-moving machinery Access systems
ISO 15534-2:2000 Ergonomic design for the safety of machinery — Part 2: Principles for determining the dimensions required for access openings
ISO 6385:2016 Ergonomics principles in the design of work systems
EN 12643:2014 Earth-moving machinery - Rubber-tyred machines - Steering requirements (ISO 5010:1992 modified)
ISO 11064-2:2000 Ergonomic design of control centres Part 2: Principles for the arrangement of control suites
EN 894-4:2010 Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 4: Location and arrangement of displays and control actuators
ISO/TR 7250-2:2010 Basic human body measurements for technological design Part 2: Statistical summaries of body measurements from national populations
ISO 9355-2:1999 Ergonomic requirements for the design of displays and control actuators — Part 2: Displays
ISO Guide 78:2008 Safety of machinery Rules for drafting and presentation of safety standards
ISO 23125:2015 Machine tools Safety Turning machines
ISO 11064-7:2006 Ergonomic design of control centres Part 7: Principles for the evaluation of control centres
EN 894-1:1997+A1:2008 Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 1: General principles for human interactions with displays and control actuators

View more information
$326.02
Including GST where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Need help?
Call us on 131 242, then click here to start a Screen Sharing session
so we can help right away! Learn more