Customer Support: 131 242

  • There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

KTA 1408.1 : 2015 COR 2016

Current
Current

The latest, up-to-date edition.

QUALITY ASSURANCE OF WELD FILLER METALS AND WELDING CONSUMABLES FOR PRESSURE AND ACTIVITY-RETAINING SYSTEMS IN NUCLEAR POWER PLANTS - PART 1: QUALIFICATION TESTING
Published date

12-01-2013

Fundamentals
1 Scope
2 Definitions
3 Requirements regarding the manufacturer's
   works
4 Assessment of the suitability of weld filler
   metals and welding consumables
5 Workability of weld filler metals
6 Limitation of the range of application
7 Supplementary tests
8 Certificates
9 Transfer of qualification test
10 Extension of the validity of the qualification
   test
Annex A: Data sheets for weld filler metals
Annex B: Declaration of identity
Annex C: Extent of the tests to be carried out
         within the scope of the plant internal
         quality assurance for the validity extension
         of the qualification tests of weld filler
         metals and welding consumables
Annex D: Verification of the welding behaviour of
         rod electrodes
Annex E: Testing for susceptibility to hot cracking
         (ring segment specimen)
Annex F: Additional requirements (values in mass
         percentage) regarding the chemical composition
         of all-weld metal of coated rod electrodes,
         flux cored wire electrodes and wire flux
         combinations as well as the chemical composition
         of massive products
Annex G: Suitability assessment of weld filler metals
         and welding consumables in the case of
         small quantities (application-specific
         individual material appraisal)
Annex H: Regulations referred to in this Safety
         Standard

Pertains to the qualification testing of weld filler metals and welding consumables which are to be used in the fabrication of product forms, parts and sub-assemblies for pressure-retaining walls of components of stationary nuclear power plants with light water reactors.

DevelopmentNote
Supersedes VDTUEV 1753 KERNTECHNIK. (03/2002) DRAFT 2017 issued in November 2017. (12/2017)
DocumentType
Standard
PublisherName
Kerntechnischer Ausschuss
Status
Current
Supersedes

KTA 3407 : 2014 PIPE PENETRATIONS THROUGH THE REACTOR CONTAINMENT VESSEL
KTA 3211.1 : 2015 PRESSURE AND ACTIVITY RETAINING COMPONENTS OF SYSTEMS OUTSIDE THE PRIMARY CIRCUIT - PART 1: MATERIALS
KTA 3201.3 : 2007(R2012) COMPONENTS OF THE REACTOR COOLANT PRESSURE BOUNDARY OF LIGHT WATER REACTORS - PART 3: MANUFACTURE

DIN EN ISO 6892-2:2011-05 METALLIC MATERIALS - TENSILE TESTING - PART 2: METHOD OF TEST AT ELEVATED TEMPERATURE
DIN EN ISO 6507-1:2016-08 (Draft) METALLIC MATERIALS - VICKERS HARDNESS TEST - PART 1: TEST METHOD
DIN EN ISO 6847:2013-11 WELDING CONSUMABLES - DEPOSITION OF A WELD METAL PAD FOR CHEMICAL ANALYSIS (ISO 6847:2013)
DIN EN ISO 9606-1:2013-12 QUALIFICATION TESTING OF WELDERS - FUSION WELDING - PART 1: STEELS (ISO 9606-1:2012 INCLUDING COR 1:2012 AND COR 2:2013)
DIN EN ISO 21952:2012-08 Welding consumables - Wire electrodes, wires, rods and deposits for gas-shielded arc welding of creep-resisting steels - Classification (ISO 21952:2012)
DIN EN ISO 14343:2017-08 WELDING CONSUMABLES - WIRE ELECTRODES, STRIP ELECTRODES, WIRES AND RODS FOR ARC WELDING OF STAINLESS AND HEAT RESISTING STEELS - CLASSIFICATION (ISO 14343:2017)
DIN EN ISO 3580:2017-08 WELDING CONSUMABLES - COVERED ELECTRODES FOR MANUAL METAL ARC WELDING OF CREEP-RESISTING STEELS - CLASSIFICATION (ISO 3580:2017)
DIN EN ISO 3581:2015-04 (Draft) WELDING CONSUMABLES - COVERED ELECTRODES FOR MANUAL METAL ARC WELDING OF STAINLESS AND HEAT-RESISTING STEELS - CLASSIFICATION (ISO 3581:2016, CORRECTED VERSION 2017-11-01)
DIN EN ISO 18274:2011-04 Welding consumables - Solid wire electrodes, solid strip electrodes, solid wires and solid rods for fusion welding of nickel and nickel alloys - Classification (ISO 18274:2010)
DIN EN ISO 14171:2015-08 (Draft) WELDING CONSUMABLES - SOLID WIRE ELECTRODES, TUBULAR CORED ELECTRODES AND ELECTRODE/FLUX COMBINATIONS FOR SUBMERGED ARC WELDING OF NON ALLOY AND FINE GRAIN STEELS - CLASSIFICATION (ISO 14171:2016)
DIN EN ISO 13916:1996-11 WELDING - MEASUREMENT OF PREHEATING TEMPERATURE, INTERPASS TEMPERATURE AND PREHEAT MAINTENANCE TEMPERATURE (ISO 13916:2017)
DIN EN ISO 17634:2015-12 WELDING CONSUMABLES - TUBULAR CORED ELECTRODES FOR GAS SHIELDED METAL ARC WELDING OF CREEP-RESISTING STEELS - CLASSIFICATION (ISO 17634:2015)
DIN EN ISO 14172:2016-02 Welding consumables - Covered electrodes for manual metal arc welding of nickel and nickel alloys - Classification (ISO 14172:2015)
DIN EN ISO 9016:2013-02 Destructive tests on welds in metallic materials - Impact tests - Test specimen location, notch orientation and examination (ISO 9016:2012)
DIN EN ISO 3651-1:1998-08 DETERMINATION OF RESISTANCE TO INTERGRANULAR CORROSION OF STAINLESS STEELS - PART 1: FERRITIC, AUSTENITIC AND FERRITIC-AUSTENITIC (DUPLEX) STAINLESS STEELS - CORROSION TEST IN NITRIC ACID MEDIUM BY MEASUREMENT OF LOSS IN MASS (HUEY TEST)
DIN EN ISO 17641-2:2016-03 DESTRUCTIVE TESTS ON WELDS IN METALLIC MATERIALS - HOT CRACKING TESTS FOR WELDMENTS - ARC WELDING PROCESSES - PART 2: SELFRESTRAINT TESTS (ISO 176412:2015)
DIN EN ISO 6892-1:2017-02 METALLIC MATERIALS - TENSILE TESTING - PART 1: METHOD OF TEST AT ROOM TEMPERATURE (ISO 6892-1:2016)
DIN EN ISO 18275:2012-07 WELDING CONSUMABLES - COVERED ELECTRODES FOR MANUAL METAL ARC WELDING OF HIGH-STRENGTH STEELS - CLASSIFICATION (ISO 18275:2011)
DIN EN ISO 14341:2011-04 WELDING CONSUMABLES - WIRE ELECTRODES AND WELD DEPOSITS FOR GAS SHIELDED METAL ARC WELDING OF NON ALLOY AND FINE GRAIN STEELS - CLASSIFICATION
DIN EN ISO 4136:2013-02 Destructive tests on welds in metallic materials - Transverse tensile test (ISO 4136:2012)
DIN EN ISO 26304:2011-11 WELDING CONSUMABLES - SOLID WIRE ELECTRODES, TUBULAR CORED ELECTRODES AND ELECTRODE-FLUX COMBINATIONS FOR SUBMERGED ARC WELDING OF HIGH STRENGTH STEELS - CLASSIFICATION (ISO 26304:2011)
DIN EN ISO 6947:2011-08 WELDING AND ALLIED PROCESSES - WELDING POSITIONS
DIN EN ISO 9015-1:2011-05 Destructive tests on welds in metallic materials - Hardness testing - Part 1: Hardness test on arc welded joints (ISO 9015-1:2001)
DIN EN 10204:2005-01 Metallic products - Types of inspection documents; German version EN 10204:2004
DIN EN ISO 24598:2012-08 WELDING CONSUMABLES - SOLID WIRE ELECTRODES, TUBULAR CORED ELECTRODES AND ELECTRODE-FLUX COMBINATIONS FOR SUBMERGED ARC WELDING OF CREEP-RESISTING STEELS - CLASSIFICATION (ISO 24598:2012)
DIN EN ISO 5173:2012-02 Destructive tests on welds in metallic materials - Bend tests (ISO 5173:2009 + Amd. 1:2011)
DIN EN ISO 18276:2016-02 (Draft) WELDING CONSUMABLES - TUBULAR CORED ELECTRODES FOR GAS-SHIELDED AND NON-GAS-SHIELDED METAL ARC WELDING OF HIGH STRENGTH STEELS - CLASSIFICATION (ISO 18276:2017)
DIN EN ISO 14175:2008-06 WELDING CONSUMABLES - GASES AND GAS MIXTURES FOR FUSION WELDING AND ALLIED PROCESSES
DIN EN ISO 17633:2016-02 (Draft) WELDING CONSUMABLES - TUBULAR CORED ELECTRODES AND RODS FOR GAS SHIELDED AND NON-GAS SHIELDED METAL ARC WELDING OF STAINLESS AND HEAT-RESISTING STEELS - CLASSIFICATION
DIN EN ISO 544:2011-06 WELDING CONSUMABLES - TECHNICAL DELIVERY CONDITIONS FOR FILLER MATERIALS AND FLUXES - TYPE OF PRODUCT, DIMENSIONS, TOLERANCES AND MARKINGS (ISO 544:2017)
DIN EN ISO 16834:2012-08 WELDING CONSUMABLES - WIRE ELECTRODES, WIRES, RODS AND DEPOSITS FOR GAS SHIELDED ARC WELDING OF HIGH STRENGTH STEELS - CLASSIFICATION (ISO 16834:2012)
DIN EN ISO 17632:2016-05 WELDING CONSUMABLES - TUBULAR CORED ELECTRODES FOR GAS SHIELDED AND NON-GAS SHIELDED METAL ARC WELDING OF NON-ALLOY AND FINE GRAIN STEELS - CLASSIFICATION (ISO 17632:2015)
DIN EN 14532-2:2005-02 WELDING CONSUMABLES - TEST METHODS AND QUALITY REQUIREMENTS - PART 2: SUPPLEMENTARY METHODS AND CONFORMITY ASSESSMENT OF CONSUMABLES FOR STEEL, NICKEL AND NICKEL ALLOYS
DIN EN ISO 15792-1:2012-01 WELDING CONSUMABLES - TEST METHODS - PART 1: TEST METHODS FOR ALL-WELD METAL TEST SPECIMENS IN STEEL, NICKEL AND NICKEL ALLOYS (ISO 15792-1:2000 + AMD 1:2011)
DIN EN 14532-1:2005-02 WELDING CONSUMABLES - TEST METHODS AND QUALITY REQUIREMENTS - PART 1: PRIMARY METHODS AND CONFORMITY ASSESSMENT OF CONSUMABLES FOR STEEL, NICKEL AND NICKEL ALLOYS
DIN EN ISO 3690:2012-07 WELDING AND ALLIED PROCESSES - DETERMINATION OF HYDROGEN CONTENT IN ARC WELD METAL (ISO 3690:2012)

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Need help?
Call us on 131 242, then click here to start a Screen Sharing session
so we can help right away! Learn more