MIL A 8625 : F

Superseded

Superseded A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Add to Watchlist

View superseded by

This Standard has been added successfully to your Watchlist
Please visit My Watchlist to see all standards that you are watching.

Please log in or create an account to add this standard to your Watchlist.

We could not add this standard to your Watchlist.
Please retry or contact support for assistance.

You have already added this standard to your Watchlist.
Visit My Watchlist to view the full list.

ANODIC COATINGS FOR ALUMINUM AND ALUMINUM ALLOYS

Available format(s): Hardcopy, PDF

Superseded date: 13-03-2021

Language(s):

Published date: 10-09-1993

Publisher: US Military Specs/Standards/Handbooks

Add to Watchlist

Table of Contents - (Show below) - (Hide below)

1. SCOPE
2. APPLICABLE DOCUMENTS
3. REQUIREMENTS
4. QUALITY ASSURANCE PROVISIONS
5. PACKAGING
6. NOTES

Abstract - (Show below) - (Hide below)

Describes the requirements for six types and two classes of electrolytically formed anodic coatings on aluminum and aluminum alloys for non-architectural applications.

General Product Information - (Show below) - (Hide below)

Committee	AREA MFFP
Development Note	Supersedes SAE AMS A 8625 (10/2003)
Document Type	Standard
ISBN
Pages
Published
Publisher	US Military Specs/Standards/Handbooks
Status	Superseded
Superseded By	MIL-PRF-8625F:2003+AMD 2:2020
Supersedes	SAE AMS A 8625 : 2003 MIL A 8625 : E MIL C 60539 : 66 NOTICE 1 MIL C 60536 : NOTICE 1

International Equivalents – Equivalent Standard(s) & Relationship - (Show below) - (Hide below)

Equivalent Standard(s)	Relationship
SAE AMS 2471 : 2014	Similar to
SAE AMS 2472 : 2014	Similar to
SAE AMS 2469 : 2014	Similar to
SAE AMS 2470 : 2013	Similar to

Standards Referenced By This Book - (Show below) - (Hide below)

MIL S 81963 : B	SERVO-COMPONENT, PRECISION INSTRUMENT, ROTATING, COMMON REQUIREMENTS AND TESTS, GENERAL SPECIFICATION FOR
MIL STD 2110 : 0	RESTORATION, OVERHAUL, AND REPAIR OF ELECTRONIC EQUIPMENT
MIL W 17316 : A	WIND MEASURING SET AN/PMQ-30 (COMPONENTS OF)
SAE AS 8568 : 2012	BINOCULARS, PRISMATIC, HAND-HELD (FOR AERONAUTICAL USE) (7 X 50 AND 6 X 42 (WIDE FIELD))
MIL DTL 43719 : D	MARKING MATERIALS AND MARKERS, ADHESIVE, ELASTOMERIC, PIGMENTED; GENERAL SPECIFICATION FOR
MIL S 26547 : C	STARTER-GENERATOR ENGINE STU-6A
MIL R 71126 : 0	RIFLE, 7.62 MILLIMETER, SNIPER W/DAY OPTICAL SIGHT AND CARRYING CASES - M24
NASM 20470:2013	RIVET, SOLID, UNIVERSAL HEAD, ALUMINIUM ALLOY AND TITANIUM COLUMBIUM ALLOY
MIL H 7195 : G	HARDWARE, PARACHUTE, GENERAL SPECIFICATION FOR
MIL C 38240 : C	COMPUTER, ALTITUDE, ALTITUDE ENCODING CPU 66, GENERAL SPECIFICATION FOR AND MTU 39/A MOUNTING TRAY
MIL I 8580 : B	INDICATOR, TACHOMETER, HELICOPTER, 0-4000 RPM TYPE MA 1
MS 20759 : C	ELBOW, HOSE, FLANGED SWIVEL, 90 DEGREES
MIL T 5842 : B	TRANSPARENT AREAS ON AIRCRAFT SURFACES [WINDSHIELDS AND CANOPIES] RAIN REMOVING AND WASHING SYSTEMS FOR, DEFROSTING, DEICING, DEFOGGING, GENERAL SPECIFICATION FOR
MS 28780 : F	FITTING END, 45 DEGREES ELBOW, ATTACHABLE, HYDRAULIC, HIGH PRESSURE HOSE 3000 PSI, FLARED TUBE
MIL DTL 52404 : C	CONNECTIONS: HOSE, FIRE AND WATER
MIL A 38307 : A	ACCELEROMETER, AIRCRAFT, MX-6663/AJB-7
ASTM F 901 : 2001 : R2007	Standard Specification for Aluminum Transmission Tower Bolts and Nuts
MIL T 38034 : E	TIMER, FIRE CONTROL, BOMBING, DUAL
RR B 00300 : 0	BINDER, NOTE PAD, SPRING-BACK
MIL DTL 52471/10 : B	HOSE ASSEMBLIES, RUBBER, HYDRAULIC PRESSURE-TYPE, TYPE 100R12 FOUR-SPIRAL-WRAP REINFORCEMENT HOSE
MIL DTL 52525/35 : B	FITTINGS, HOSE, SCREW-ON TO 4-BOLT SPLIT-FLANGE, 45 DEGREES BENT TUBE
MIL P 81655 : 0	PITOT STATIC TUBE, L-SHAPED, COMPENSATED, ELECTRICALLY HEATED, GENERAL SPECIFICATION FOR
MIL A 53100 : 0	ARCTIC FUEL SYSTEM SUPPLY POINT (AFSSP)
MIL C 48683 : A	CARTRIDGE, 40MM, M918 TP; PROJECTILE ASSEMBLY FOR METAL PARTS AND LOADING, ASSEMBLING AND PACKAGING
SAE AS 8662 : 1999	KNIFE, HUNTING, SHEATHED, SURVIVAL, PILOTS
MIL DTL 52525/10 : D	FITTINGS, HOSE, SCREW-ON TO 4-BOLT SPLIT-FLANGE, STRAIGHT
MIL E 16400 : H	ELECTRONIC, INTERIOR COMMUNICATIONS AND NAVIGATION EQUIPMENT, NAVAL SHIP AND SHORE, GENERAL SPECIFICATION FOR
MIL DTL 83796/16 : A	HOSE ASSEMBLY, RUBBER, LIGHTWEIGHT, MEDIUM PRESSURE, INTERNAL SUPPORT COIL, FIELD ATTACHABLE END FITTINGS, FLARELESS TO FLANGE
MIL DTL 83796/10 : A	HOSE ASSEMBLY, RUBBER, LIGHT WEIGHT, INTERNAL SUPPORT COIL, MEDIUM PRESSURE, FIELD ATTACHABLE END FITTINGS, FLARE TO FLARE
MIL T 5578 : C	TANK, FUEL, AIRCRAFT, SELF-SEALING
MIL DTL 52525/7 : D	FITTINGS, HOSE, SCREW-ON TO 37 DEGREES FLARE FEMALE SWIVEL, 90 DEGREES BENT TUBE, SHORT DROP
FF R 556 : D	RIVET, SOLID, SMALL, RIVET, SPLIT, SMALL, RIVET TUBULAR SMALL, FLAT WASHER (BURR) AND CAP RIVET, GENERAL PURPOSE
AN 915 : 0014	ELBOW, PIPE, 45 DEGREES
MIL S 24317 : 0	SWITCH, MULTI-STATION, PUSHBUTTON (ILLUMINATED AND NON-ILLUMINATED), GENERAL SPECIFICATION FOR
MIL A 83577 : B	ASSEMBLIES, MOVING MECHANICAL, FOR SPACE AND LAUNCH VEHICLES, GENERAL SPECIFICATION FOR
SAE AS 5604 : 2012	COMPASS: MAGNETIC, PILOT'S STANDBY
SAE AS 5356 : 2017	COUPLING, FUEL LINE, FLEXIBLE, 125 PSI GENERAL SPECIFICATION FOR
MIL A 24741 : 0	ASSEMBLIES, METAL ELECTRICAL BACKPLANE, ONE AND TWO LAYER, GENERAL SPECIFICATION FOR
MIL DTL 23971 : E	POWER DIVIDERS, POWER COMBINERS, AND POWER DIVIDER/COMBINERS, GENERAL SPECIFICATION FOR
MIL DTL 32480 : 0	ADAPTER, HYDRAULIC AND PNEUMATIC, FLARELESS TUBE FITTING TO ORFS CONNECTORS, 1500 TO 3000 PSI AND -65 DEGREES F TO 250 DEGREES F, GENERAL SPECIFICATION FOR
MIL DTL 4510 : F	SPOTLIGHTS, INCANDESCENT, ROOF-MOUNTED, AUTOMOTIVE
MIL I 7062 : C	INDICATOR, POSITION, CONTROL SURFACES, 28 VOLT DC, GENERAL SPECIFICATION FOR
MIL T 22085 : E	TAPES, PRESSURE-SENSITIVE, ADHESIVE, PRESERVATION AND SEALING
MIL C 19853 : D	CARBON REMOVING COMPOUND (FOR USE IN AGITATED TANK)
MS 27086 : D	ELBOW, NIPPLE END, FLARED, TUBE TO HOSE - 90 DEGREE SWIVEL NUT
MIL DTL 83796/11 : A	HOSE ASSEMBLY, RUBBER, LIGHTWEIGHT, MEDIUM PRESSURE, INTERNAL SUPPORT COIL, FIELD ATTACHABLE END FITTINGS, FLARE TO FLARE, WITH LOCKWIRE HOLE
MS 27087 : D	ELBOW, NIPPLE END, FLARED, TUBE TO HOSE - 45 DEGREE SWIVEL NUT
MIL DTL 53072 : F	CHEMICAL AGENT RESISTANT COATING (CARC) SYSTEM - APPLICATION PROCEDURES AND QUALITY CONTROL INSPECTION
MIL P 64008 : 0	PROJECTILE, 155MM: XM825 METAL PARTS ASSEMBLY
MIL C 53072 : B	CHEMICAL AGENT RESISTANT COATING (CARC) SYSTEM APPLICATION PROCEDURES AND QUALITY CONTROL INSPECTION
MIL DTL 45916 : C	INSERT, SCREW THREAD - THREAD CUTTING AND THREAD FORMING
SAE AS 7997A : 1999(S2018)	MOTORS, AIRCRAFT HYDRAULIC, CONSTANT DISPLACEMENT - GENERAL SPECIFICATION FOR
MIL W 13855 : D	WEAPONS, SMALL ARMS AND AIRCRAFT ARMAMENT SUBSYSTEMS, GENERAL SPECIFICATION FOR
MIL V 29592 : 0	VALVE, AIR VENT, AUTOMATIC, HYDRAULIC, LOW PRESSURE TYPE II SYSTEMS, GENERAL SPECIFICATION FOR
MIL PRF 32405 : 0	CLEANER, HAND WIPE, FOR AVIATION AND MISSILE SYSTEMS, METALLIC SUBSTRATES, LOW OR EXEMPT VOC
MIL T 6396 : E	TANKS, AIRCRAFT PROPULSION FLUID SYSTEM, INTERNAL REMOVABLE, NON-SELF-SEALING
MIL PRF 81329 : E	LUBRICANT, SOLID FILM, EXTREME ENVIRONMENT, NATO CODE NUMBER S-1737
MIL DTL 3661 : D	LAMPHOLDERS, INDICATOR LIGHTS, INDICATOR LIGHT HOUSINGS, AND INDICATOR LIGHT LENSES, GENERAL SPECIFICATION FOR
MIL F 27272 : B	FITTING, TETRAFLUOROETHYLENE HOSE, HIGH TEMPERATURE, MEDIUM PRESSURE, GENERAL REQUIREMENTS FOR
MIL T 27252 : A	TEST SET, SYNCHRO, TTU-73/E DC SELSYN, AIRCRAFT INSTRUMENTS
MS 28781 : E	FITTING END, 90 DEGREES ELBOW, ATTACHABLE, HYDRAULIC, HIGH PRESSURE HOSE 3000 PSI, FLARED TUBE
MIL P 26292 : C	PITOT AND STATIC PRESSURE SYSTEMS, INSTALLATION AND INSPECTION OF
MIL DTL 5002 : E	SURFACE TREATMENTS AND INORGANIC COATINGS FOR METAL SURFACES OF WEAPONS SYSTEMS
MIL S 7124 : B	SEALING COMPOUND, POLYSULFIDE, ACCELERATOR REQUIRED FOR AIRCRAFT STRUCTURES
MIL F 52618/9 : A	FITTINGS, PIPE, ALUMINUM ALLOY (THREADED) 150 POUND: GENERAL SPECIFICATION FOR
MIL DTL 39030/6 : C	DUMMY LOADS, ELECTRICAL, COAXIAL, TYPE 5 (N), LOW POWER
MIL T 83460 : 0	TRANSDUCER, MOTIONAL PICKUP TRU-164/A
MIL DTL 52525/32 : A	FITTINGS, HOSE, REINFORCED HYDRAULIC HOSE AND CLAMP-HALVES: FIELD ATTACHABLE (REUSABLE), SCREW-ON TO 37 DEGREES FLARE FEMALE SWIVEL, 45 DEGREES BENT TUBE, FOR USE WITH TYPE 100RE FOUR-SPIRAL-WRAP REINFORCEMENT HOSE
MIL DTL 52525/44 : 0	FITTINGS, HOSE, CRIMP TYPE, SPLIT-FLANGE, 45 DEGREES BENT TUBE
MIL I 7627 : F	INDICATOR, TURN AND SLIP 28V DC
MIL I 83152 : B	INDICATOR, INDICATED-AIRSPEED AVU-22/A (INDICATOR-TRANSDUCER)
MIL DTL 5815/1 : B	ANTENNA, BLADE, UHF, AT-256A/ARC (SERIES N CONNECTOR)
MIL I 7721 : D	INDICATOR, VERTICAL SPEED, 3-INCH
MIL I 38121 : C	INDICATOR, PRESSURE, EGU-9/A
AN 849 : 0013	NIPPLE, HOSE
AN 838 : 0009	ELBOW, TUBE TO HOSE, 90 DEGREES
MIL DTL 52525/1 : D	FITTINGS, HOSE, SCREW-ON TO 37 DEGREES FLARE FEMALE SWIVEL, STRAIGHT, SAE-J516 TYPE, FOR ASSEMBLY WITH SAE-J517, TYPE 100R2 HOSE
MIL DTL 52525/43 : 0	FITTINGS, HOSE, CRIMP TYPE, SPLIT-FLANGE, STRAIGHT
MIL DTL 52525/11 : C	FITTINGS, HOSE, SCREW-ON TO 4-BOLT SPLIT-FLANGE, 45 DEGREES BENT TUBE
MIL R 8236 : F	REEL, SHOULDER HARNESS, INERTIA LOCK
MIL S 29574 : 0	SEALING COMPOUND, POLYTHIOETHER, FOR AIRCRAFT STRUCTURES, FUEL AND HIGH TEMPERATURE RESISTANT, FAST CURING AT AMBIENT AND LOW TEMPERATURE
MIL I 27197 : C	INDICATOR, AIRSPEED, MACH NUMBER AND MAXIMUM ALLOWABLE SPEED
MIL A 5885 : D	ACCELEROMETER, AIRCRAFT
MIL A 8243 : D	ANTI-ICING AND DEICING-DEFROSTING FLUIDS
MIL D 83320 : 0	DETECTOR, MAGNETIC AZIMUTH DSU-14/A
MIL C 38214 : B	COMPASS, MAGNETIC,MOUNTED
MIL I 81969 : B	INSTALLING AND REMOVAL TOOLS, CONNECTOR ELECTRICAL CONTACT, GENERAL SPECIFICATION FOR
MIL I 983 : E	INTERIOR COMMUNICATION EQUIPMENT, NAVAL SHIPBOARD, BASIC DESIGN REQUIREMENTS FOR
MIL P 9388 : B	PUMP, PRESSURE, OIL FREE AIR TYPE MA-2
MIL I 85071 : A	INVERTERS, AIRCRAFT, DC TO AC, GENERAL SPECIFICATION FOR
MIL DTL 27188 : C	INDICATOR, PRESSURE EGU-2/A, OIL, 0-100 PSI
MIL PRF 32359 : 0	CLEANER, GENERAL, FOR GROUND VEHICLES AND GROUND SUPPORT EQUIPMENT, HAP-FREE
MIL DTL 32372 : A	FITTING, ADAPTER, HYDRAULIC AND PNEUMATIC, NPTF TO ORFS CONNECTORS, 1500 TO 3000 PSI AND -65 DEGREES F TO 250 DEGREES F
MIL HDBK 11991 : 0	DESIGN OF ELECTRICAL, ELECTRONIC, AND ELECTRO-MECHANICAL EQUIPMENT, GUIDED MISSILE AND ASSOCIATED WEAPONS SYSTEMS
MIL C 27298 : B	CLOCK, AIRCRAFT, MECHANICAL ABU AND 9-A
AN 815 : 0010	UNION - FLARED TUBE
MIL T 38473 : A	TIMER, PRECISION, BOMBING, 0 - 30 MINUTES
MIL C 8605 : B	CAP, PRESSURE FUEL SERVICING
MIL A 38140 : B	ALTIMETER, PRESSURE AAU-16/A
MIL DTL 52525/40 : B	FITTINGS, HOSE, CRIMP TYPE, SPLIT-FLANGE, STRAIGHT
MIL H 81014 : A NOTICE 1	HOOK, HELICOPTER, EXTERNAL CARGO, 20,000 POUND CAPACITY, TYPE C
MIL STD 193 : L	PAINTING PROCEDURES AND MARKING FOR VEHICLES, CONSTRUCTION EQUIPMENT, MATERIAL HANDLING EQUIPMENT, AND SPARE PARTS
MIL G 25597 : D	GYROSCOPE, DISPLACEMENT, ROLL AND PITCH, TYPE MD-1
MIL A 83377 : B	ADHESIVE BONDING (STRUCTURAL) FOR AEROSPACE AND OTHER SYSTEMS, REQUIREMENTS FOR
MIL V 82466 : 0	VACUUM-AIR-NITROGEN DISTRIBUTION SYSTEM
MIL L 50794 : 0	LINEAR SHAPED CHARGE ASSEMBLY
MIL PRF 85322 : C	COATING, ELASTOMERIC, POLYURETHANE, RAIN-EROSION
MIL B 28617 : C	BOOMS, FLOATING BARRIER, OIL (FOR HARBOR USE)
MIL C 85322 : B	COATING ELASTOMERIC, POLYURETHANE, RAIN EROSION RESISTANT, FOR EXTERIOR AIRCRAFT USE
MIL P 85582 : B	PRIMER COATINGS: EPOXY, WATERBORNE
MIL DTL 8878 : L	TURNBUCKLES, POSITIVE SAFETYING, GENERAL SPECIFICATION FOR
MIL B 8568 : B	BINOCULAR, PRISMATIC, HAND-HELD [FOR AERONAUTICAL USE] 7 X 50 AND 6 X 42 WIDE FIELD [ASG]
MIL S 25879 : C	SWITCH, RADIO FREQUENCY TRANSMISSION LINE SA-521A/A
MIL T 21208 : 0	TEST SET, RADIO AN/ARM-32
A B 2787 : 0	BOOMS: FLOATING OIL AND DEBRIS CONTAMINANT, DEPLOYABLE (FOR HARBOR USE)
MIL DTL 28748/15 : 0	CONNECTORS, ELECTRICAL, HEXAGONAL, RACK AND PANEL, MINIATURE, PLUG-RECEPTACLE, FEMALE SOLDER CUP OR PRINTED WIRING BOARD SOCKET CONTACTS, SIZE 20
MIL S 45933 : 0	STUD, KEYRING LOCKED, 125 AND 160 KSI FTU, GENERAL SPECIFICATION FOR
MIL T 27305 : C	TRANSFORMER AND INDUCTORS [AUDIO, POWER AND HIGH POWER PULSE] INDUCTOR, POWER TF5S04ZZ
MIL C 60827 : A	CARTRIDGE IMPULSE, XM259, ASSEMBLY
MS 27076 : E	NIPPLE, STRAIGHT, SWIVEL FLANGE
AN 846 : 0009	ELBOW, HOSE, 45 DEGREES
MIL D 3898 : B	DRAFTING MACHINE AND SCALES GENERAL SPECIFICATION FOR
GGG W 00686 : C	WRENCH TORQUE
MIL S 9395 : F	SWITCHES, PRESSURE, [ABSOLUTE, GAGE AND DIFFERENTIAL] GENERAL SPECIFICATION FOR
MIL C 7135 : F	COMPRESSOR, PNEUMATIC, 3000 PSI 2 SCFM AERO 2A AERO 2A-1 AERO 2B AND AERO 2B-1
MIL DTL 6484 : D	LIGHTS, COCKPIT UTILITY, AIRCRAFT, GENERAL SPECIFICATION FOR
MIL I 81186 : 0	INDICATOR, RATE OF FUEL FLOW SYNCHRO TYPE, M590360
MIL DTL 83796/7 : D	HOSE ASSEMBLY, RUBBER, LIGHTWEIGHT, MEDIUM PRESSURE, FIELD ATTACHABLE END FITTINGS, FLARELESS TO FLANGE
MIL M 7255 : B	MANOMETER, PRESSURE, DIFFERENTIAL AND ABSOLUTE TYPE E 1
MIL C 28748/8 : E	CONNECTOR, ELECTRICAL, RECTANGULAR, RACK AND PANEL, SOLDER TYPE SOCKET CONTACTS, SIZE 22
MIL F 22735 : C	FILM, ELASTOMERIC, FLUORESCENT, FOR WEAPONS SYSTEMS
MIL B 5806 : F	BOX, SHIPPING, AND STORAGE, HELICOPTER BLADE
MIL-PRF-23145C:2018	INFLATION ASSEMBLIES, LIFE PRESERVER
MIL I 21206 : B	INDICATOR, RATE OF FLOW, FUEL; EFU-7/A (300-5000-15000 PPH)
MIL DTL 0050872 : D	CARTRIDGE, 40 MM: HEDP, M433
MIL I 27709 : A	INDICATOR, ATTITUDE ARU-14/A, REMOTE
MIL DTL 83796/4 : C	HOSE ASSEMBLY, RUBBER, LIGHTWEIGHT, MEDIUM PRESSURE, FIELD ATTACHABLE END FITTINGS, FLARELESS TO FLARELESS WITH LOCKWIRE HOLE
MIL E 5627 : B	EXTINGUISHERS, FIRE, CARBON DIOXIDE, PORTABLE
MIL DTL 81963 : C	SERVOCOMPONENTS, PRECISION INSTRUMENT, ROTATING, COMMON REQUIREMENTS AND TESTS, GENERAL SPECIFICATION FOR
MIL E 17341 : C	ENGINE, GAS TURBINE, PROPULSION & AUXILIARY NAVAL SHIPBOARD
MIL DTL 52471/1 : C	HOSE ASSEMBLIES, RUBBER, HYDRAULIC PRESSURE-TYPE, TYPE 100R1, SINGLE-WIRE BRAIDED REINFORCEMENT HOSE
MIL T 83823 : 0	TRUCK, FIRE FIGHTING (STRUCTURAL OR BRUSH STRUCTURAL)
MIL S 81733 : C	SEALING AND COATING COMPOUND CORROSION INHIBITIVE
MIL DTL 52525/6 : C	FITTINGS, HOSE, SCREW-ON TO 37 DEGREES FLARE FEMALE SWIVEL, 45 DEGREES BENT TUBE
TT P 1757 : B	PRIMER COATING, ALKYD BASE, ONE COMPONENT
MIL DTL 39030 : F	DUMMY LOADS, ELECTRICAL, COAXIAL AND STRIPLINE, GENERAL SPECIFICATION FOR
MIL DTL 21604 : G	SWITCHES, ROTARY, MULTIPOLE AND SELECTOR, GENERAL SPECIFICATION FOR
MIL PRF 87978 : A	REMOVER, PAINT, EPOXY AND POLYURETHANE SYSTEMS, TANK TYPE, AMBIENT TEMPERATURE, FOR AIRCRAFT WHEELS AND LANDING GEAR COMPONENTS
MIL PRF 83419 : F	ALTIMETER, SERVO CONTROLLED, AUTOMATIC PRESSURE STANDBY
TT R 2918 : A	REMOVAL, PAINT, NO HAZARDOUS AIR POLLUTANTS (HAPS)
MIL S 12158 : D	SEALING COMPOUND, NONCURING, POLYBUTANE
MIL A 55503 : 0	ATTITUDE HEADING REFERENCE SET AN/ASN-76
MIL T 8878 : D	TURNBUCKLE, POSITIVE SAFETYING
MIL DTL 83798/4 : D	FITTINGS, RUBBER HOSE, LIGHTWEIGHT, MEDIUM PRESSURE, FLARELESS, SWIVEL NUT, STRAIGHT
MIL DTL 0048683 : B	CARTRIDGE 40 MM PRACTICE - TP M918 - PROJECTILE ASSEMBLY FOR METAL PARTS AND LOADING, ASSEMBLING AND PACKAGING
MS 27387 : D	ELBOW SUB ASSEMBLY, FLARELESS, 45 DEGREES, SWIVEL NUT
MIL DTL 52525/36 : B	FITTINGS, HOSE, CRIMP TYPE, SPLIT-FLANGE, 90 DEGREES BENT TUBE
MIL A 38267 : A	APPLICATION OF POLYURETHANE FUEL TANK COATINGS
MIL V 85855 : 0	VALVE, QUICK DISCONNECT, FOR THE PROTECTIVE ASSEMBLY, CHEMICAL, RADIOLOGICAL
MS 9095 : B	NIPPLE, TUBE - ALUMINUM, BOSS
MIL DTL 52525/15 : C	FITTINGS, HOSE, SCREW-ON TO 4-BOLT SPLIT-FLANGE, 90 DEGREES BENT TUBE
MIL R 87978 : LATEST	REMOVER, PAINT, EPOXY AND POLYURETHANE SYSTEMS, TANK TYPE: AMBIENT TEMPERATURE, FOR AIRCRAFT WHEELS AND LANDING GEAR COMPONENTS
GG D 475 : A	DIVIDER, SPACING, EQUAL
MIL I 27196 : C	INDICATOR, VERTICAL VELOCITY AAU-9/A, INTEGRALLY LIGHTED
MIL I 27279 : B	INDICATOR, MACH NUMBER AVU-11/A, INTEGRAL LIGHTING
MIL B 24535 : A	BURNER, CARBON MONOXIDE AND HYDROGEN, CATALYTIC TYPE (MARK V)
MIL R 007885 : C SUPP 1	RIVETS; BLIND, STRUCTURAL, LOCKED AND FRICTION RETAINED SPINDLE, GENERAL SPECIFICATION FOR
MIL I 18369 : C	INFLATION EQUIPMENT, CARBON DIOXIDE, FOR MULTIPLACE LIFE RAFTS
DOD E 83578 : A	EXPLOSIVE ORDNANCE FOR SPACE VEHICLES, GENERAL SPECIFICATION FOR (METRIC)
MIL F 50869 : E	FUZE, PIBD M550 LESS SPITBACK ASSEMBLY METAL PARTS & LOADING ASSEMBLING AND PACKING
MIL L 19537 : C	LACQUER, ACRYLIC NITROCELLULOSE GLOSS (FOR AIRCRAFT USE)
MIL T 52993 : 0	TABLE, PHOTOINTERPRETER & ANALYST, ILLUMINATED, SPLIT STAGE
MIL DTL 0063092 : B	CARTRIDGES, 40 MM, WHITE STAR, PARACHUTE, M583A1 GREEN STAR, PARACHUTE, M661 RED STAR, PARACHUTE, M662 METAL PARTS AND LOADING, ASSEMBLIES
MIL C 23367 : 0	COMPUTER, FLIGHT DIRECTOR, AIRCRAFT
MIL DTL 25949 : F	ACCELEROMETER, AIRCRAFT RANGE -5 TO 10G UNITS, INTEGRALLY LIGHTED
MIL I 45932 : 0	INSERT, SCREW THREAD, THIN WALL, LOCK IN
SAE AS 6116 : 2016	ALUMINUM FITTINGS, AXIALLY SWAGED TUBE WITH FLARELESS SEPERABLE, FLUID SYSTEM, UP TO 1500 PSI (10340 KPA) MAXIMUM, SPECIFICATION FOR
PREN 6068 : 200P2	AEROSPACE SERIES - PIN, QUICK RELEASE, SELF-RETAINING, POSITIVE LOCKING, SINGLE ACTING, BUTTON HANDLE
SAE ARP 1616 : 2017	SELF-SEALING BREAKAWAY VALVES FOR CRASH-RESISTANT AIRCRAFT FUEL AND OIL SYSTEMS
SAE AS 39631 : 1999	UNIVERSAL JOINT, ANTIFRICTION BEARINGS
DSCC 84191 : K	EXTRACTOR, ELECTRICAL CARD, METAL
SAE AS 1472 : 2013	HOSE ASSEMBLY, LOW PRESSURE, POTABLE WATER
I.S. EN 6080:2016	AEROSPACE SERIES - RIVET, 100 DEGREES NORMAL FLUSH HEAD, CLOSE TOLERANCE - INCH SERIES
SAE AMS C 27725 : 2016	COATING, CORROSION PREVENTATIVE, FOR AIRCRAFT INTEGRAL FUEL TANKS, FOR USE TO 250 DEGREES F (121 DEGREES C)
SAE AS 12500 : 2018	CORROSION PREVENTION AND DETERIORATION CONTROL IN ELECTRONIC COMPONENTS AND ASSEMBLIES
ASTM D 2651 : 2001 : R2008	Standard Guide for Preparation of Metal Surfaces for Adhesive Bonding
ASTM D 1730 : 2009 : R2014	Standard Practices for Preparation of Aluminum and Aluminum-Alloy Surfaces for Painting
ASTM D 1730 : 2009	Standard Practices for Preparation of Aluminum and Aluminum-Alloy Surfaces for Painting
ASTM F 1110 : 2009	Standard Test Method for Sandwich Corrosion Test
SAE AS 95234A : 2020	CONNECTORS, ELECTRICAL, REVERSE BAYONET, GENERAL SPECIFICATION FOR
MIL DTL 28754/11 : F	CONNECTORS, ELECTRICAL, MODULAR, TYPE 4, 40 CONTACT, RIGHT ANGLE (FOR SOLID OR DIP FRAME)
MIL DTL 6162 : C	GENERATORS AND STARTER-GENERATORS, ELECTRICAL DIRECT CURRENT, NOMINAL 30 VOLTS, AIRCRAFT GENERAL SPECIFICATION FOR
MIL-DTL-28754/59A:2016	CONNECTORS, ELECTRICAL, MODULAR, TYPE 4, CONNECTOR, 100 PIN, CENTER CONTACT TAILS ON .100 CENTERS (CERAMIC COMPATIBLE)
MIL DTL 25707/1 : C	ANTENNA, FLUSH MOUNT TYPE AT-740/A
SAE AS 4468 G : 2017	HOSE ASSEMBLY, 125 PSI, LINED SILICONE, POTABLE WATER, PROCUREMENT SPECIFICATION
A A 59789 : B	HOLDER, ELECTRICAL CARD, WEDGE RETAINERS, 5 PIECE, FOR COLD PLATE APPLICATIONS, GENERAL REQUIREMENTS FOR
MIL R 85880 : 0	ROCKET, JET ASSISTED TAKE OFF (JATO) PROPULSION SYSTEM, GENERAL DEVELOPMENT SPECIFICATION FOR
MIL DTL 24317 : B	SWITCHES, MULTISTATION, PUSHBUTTON, ILLUMINATED AND NON-ILLUMINATED), GENERAL SPECIFICATION FOR
SAE AS 4841 : 2017	FITTINGS, 37 DEGREES INTERNAL FLARE, FLUID CONNECTION, PROCUREMENT SPECIFICATION
MIL C 85829 : 0	COUPLING ASSEMBLY, HOSE, CHEMICAL, BIOLOGICAL, RADIOLOGICAL PROTECTIVE
MIL V 7891 : E	VALVE, OXYGEN FILLER, LOW AND PRESSURE
SAE AMS C 19853 : 1998	CARBON REMOVING COMPOUND (FOR USE IN AGITATED TANK)
MS 27082 : E	ELBOW, NIPPLE END, SWIVEL FLANGE TO HOSE - 90 DEGREES
MIL S 8802 : F	SEALING COMPOUND, TEMPERATURE-RESISTANT, INTEGRAL FUEL TANKS AND FUEL CELL CAVITIES, HIGH ADHESION
MIL I 6447 : C	INDICATOR, TRUE AIRSPEED TYPE M 1A
DOD I 63274 : A	INSERT, SCREW THREAD THIN WALL, LOCKED IN, METRIC, GENERAL SPECIFICATION FOR
A A 2653 : 0	BINDER, NOTE PAD, SPRING-BACK
DEFSTAN 00-77(PT1)/1(2005) : INTERIM	ASAAC STANDARDS - PART 1: PROPOSED STANDARDS FOR PACKAGING
MIL G 19053 : C	GAGE - AIRCRAFT, CAPACITANCE, LIQUID OXYGEN CONVERTER, GENERAL SPECIFICATION FOR
MIL C 60982 : B	CASE, CARTRIDGE, 40MM, M169 PART FOR
AN 841 : 0007	ADAPTER - HOSE TO FLARED TUBE
MIL DTL 24800 : 0	CLEANING COMPOUND - AQUEOUS - OXYGEN SYSTEMS COMPONENTS
MIL S 5002 : D	SURFACE TREATMENTS AND INORGANIC COATINGS FOR METAL SURFACES OF WEAPONS SYSTEMS
MIL M 8609 : B	MOTOR, DC 28 VOLT SYSTEM AIRCRAFT, GENERAL SPECIFICATION FOR
MIL C 81945 : B	COATING COMPOUND, WEAPON INSULATION, INTUMESCENT
MIL L 46147 : B	LUBRICANT, SOLID FILM, AIR CURED (CORROSION INHIBITING)
MIL C 83231 : A	COATING, POLYURETHANE, RAIN EROSION RESISTANT FOR EXTERIOR AIRCRAFT AND MISSILE PLASTIC PARTS
MIL P 21600 : A	PAINT SYSTEM, FLUORESCENT, REMOVABLE, FOR AIRCRAFT APPLICATION
MIL R 23016 : A	RADIO SET AN/ARC-94
SAE AS 4444 : 2013	FITTINGS, 24 DEGREE CONE FLARELESS, FLUID CONNECTION, 5000 PSI
MIL DTL 83796/6 : D	HOSE ASSEMBLY, RUBBER, LIGHTWEIGHT, MEDIUM PRESSURE, FIELD ATTACHABLE END FITTINGS, FLARE TO FLANGE, WITH LOCKWIRE HOLE
MIL STD 2156 : 0	LAUNCHER, RAIL, GUIDED MISSILE, AIRCRAFT, GENERAL DESIGN CRITERIA FOR
MIL F 83870 : A	FILTER ELEMENT, FLUID PRESSURE, TRANSMISSION, AIRCRAFT DISPOSABLE, 20 MICRON ABSOLUTE
SAE AS 81934 : 2016	BEARINGS, SLEEVE, PLAIN AND FLANGED, SELF-LUBRICATING
MIL T 38049 : A	TRANSMITTER, PRESSURE TRU 60A
MIL C 60872 : A	CARTRIDGE, DELAY, XM271, ASSEMBLY
MIL DTL 83796/14 : A	HOSE ASSEMBLY, RUBBER, LIGHTWEIGHT, MEDIUM PRESSURE, INTERNAL SUPPORT COIL, FIELD ATTACHABLE END FITTINGS, FLARE TO FLANGE
MIL DTL 25427 : B	COUPLING ASSEMBLY, HYDRAULIC, SELF SEALING, QUICK DISCONNECT, GENERAL SPECIFICATION FOR
A A 59432 : B	PLUGS, PIPE, MAGNETIC, HEADLESS: IRON, STEEL OR ALUMINUM ALLOY
MS 27061 : D	NIPPLE SUBASSEMBLY, FLARED, STRAIGHT - WITH SWIVEL NUT
MIL C 7413 : B	COUPLING, QUICK DISCONNECT, AUTOMATIC SHUTOFF, GENERAL SPECIFICATION FOR
MIL C 60643 : A	CARTRIDGE, IMPULSE, M127 ASSEMBLY
MIL I 45934 : 0	INSERT, SCREW THREAD, KEYRING LOCKED, SELF LOCKING AND NON SELF LOCKING, 125, 180, AND 220 KSI FTU: GENERAL SPECIFICATION FOR
MIL DTL 26518 : C	CONNECTORS, ELECTRICAL, MINIATURE, RACK AND PANEL, ENVIRONMENT RESISTANT, 200 DEGREES C AMBIENT TEMPERATURE - GENERAL SPECIFICATION FOR
MIL DTL 28754/22 : H	CONNECTORS, ELECTRICAL, MODULAR, FRAME, CASTING, TYPE 4, SINGLE SPAN
A A 59950 : 0	HOLDER, ELECTRICAL CARD, WEDGE RETAINERS, 7 BODY, FOR COLD PLATE APPLICATIONS, GENERAL REQUIREMENTS FOR
MIL T 22913 : C	TIMER (FOR TORPEDO MARK 37 MOD 2)
MIL T 62032 : H	TRUCK, TANK, FUEL SERVICING, AND AIRCRAFT FUEL SERVICING, 1,000 - 4,000 GALLON, DIESEL & GASOLINE ENGINE DRIVEN, 16,000 GVW, 4X2, 4X4. 6 X 4 & 6X6 COMMERCIAL
MIL C 85049 : A	CONNECTOR ACCESSORIES, ELECTRICAL GENERAL SPECIFICATION FOR
MIL C 60945 : B	CARTRIDGE, 40MM, PRACTICE, M385A1 DUMMY CARTRIDGE, 40MM HIGH VELOCITY, M922 PROJECTILE PARTS FOR
MIL DTL 83798/5 : E	FITTINGS, RUBBER HOSE, LIGHTWEIGHT, MEDIUM PRESSURE, FLARELESS, SWIVEL NUT, 45 DEGREES
MIL P 21415 : C	PROTECTIVE FINISH AND PAINTING FOR POLARIS FLEET BALLISTIC MISSILE
MIL C 46241 : F	CARTRIDGE, AIRCRAFT EJECTION SEAT, CATAPULT, M36
MIL HDBK 510 : A	AEROSPACE FUELS CERTIFICATION
MIL C 83124 : 0	CARTRIDGE ACTUATED DEVICES PROPELLANT ACTUATED DEVICES GENERAL DESIGN SPECIFICATION FOR
MIL A 19736 : A	AIR REFUELLING SYSTEMS, GENERAL SPECIFICATION FOR
MIL E 50796 : 0	EXPANDING SHIELDED MILD DETONATING CORD ASSEMBLY
MIL T 52983 : G	TANK, FABRIC, COLLAPSIBLE, 3,000 10,000 20,000 AND 50,000 GALLON, FUEL
MIL C 83445 : A	COATING SYSTEM, POLYURETHANE, NON-YELLOWING WHITE, RAIN EROSION RESISTANT, THERMALLY REFLECTIVE
MIL STD 1250 : A	CORROSION PREVENTION AND DETERIORATION CONTROL IN ELECTRONIC COMPONENTS AND ASSEMBLIES
SAE AS 1969 : 2013	COUPLING ASSEMBLY, SELF-HEALING, QUICK DISCONNECT FUEL AND OIL SYSTEM COMPONENTS
AN 842 : 0013	ELBOW - PIPE TO HOSE, 90 DEGREES
MIL C 7958 : A	CONTROL, PUSH PULL, FLEXIBLE AND RIGID
BS ISO 7169:2014	AEROSPACE - SEPARABLE TUBE FITTINGS FOR FLUID SYSTEMS, FOR 24 DEGREES CONES, FOR PRESSURES UP TO 3000 PSI OR 21000 KPA - PROCUREMENT SPECIFICATION, INCH/METRIC
FF B 575 : C	BOLTS, HEXAGON AND SQUARE
MIL B 42079 : 0	BRACE ASSEMBLY ADJUSTABLE BED
MIL C 87936 : A	CLEANING COMPOUNDS, AIRCRAFT EXTERIOR SURFACES, WATER DILUTABLE
GG S 161 : D	SCALES, DRAFTING, AND SCALES, PLOTTING (GENERAL SPECIFICATION)
MIL D 83029 : A	DRIVE ASSEMBLY, CONSTANT SPEED, GENERAL SPECIFICATION FOR
MIL H 81529 : 0	HOOK, HELICOPTER EXTERNAL CARGO, 6,000 POUND CAPACITY TYPE A
MIL I 25091 : B	INDICATOR, CABIN AIR PRESSURE, PRESSURIZED AIRCRAFT, 1-7/8 INCH DIAL, TYPE MA-2
MIL P 5994 : D	PUMP, HYDRAULIC, ELECTRIC MOTOR DRIVEN, VARIABLE DELIVERY, GENERAL SPECIFICATION FOR
MIL R 83178 : A	REGULATOR, OXYGEN, DILUTER DEMAND, AUTOMATIC PRESSURE BREATHING, GENERAL SPECIFICATION FOR
MIL P 23470 : C	PIN-RIVET, THREADED AND COLLAR, PIN-RIVET, THREADED, TORQUE CONTROLLED, PRE-STRESS, SELF-LOCKING, GENERAL SPECIFICATION FOR
MIL V 7899 : C	VALVE, CHECK, AIRCRAFT FUEL SYSTEM
MIL G 23337 : 0	GAGE - PRESSURE, DIAL INDICATING
MIL A 27195 : A	ACCELEROMETER, AIRCRAFT, MECHANICAL ABU-6/A
MIL G 26611 : D	GENERATOR, TACHOMETER GEU-7/A, MINIATURE
MIL A 6589 : A	AMPLIFIER, ELECTRONIC CONTROL, SINGLE CHANNEL, TYPE A-2
MIL R 43040 : B	REMOVAL TOOLS, CONNECTOR, ELECTRICAL, CONTACT
MIL DTL 0060944 : B	CARTRIDGE, 40 MM - PRACTICE, M385A1
MIL P 514 : D	PLATE, IDENTIFICATION, INSTRUCTION AND MARKING BLANK
MIL J 2829 : E	JOINT SEALING PACKING
MS 27389 : D	ELBOW SUB ASSEMBLY, FLARELESS, 45 DEGREES FORGED, SWIVEL NUT
MIL R 81553 : B	REGULATOR, CHEST MOUNTED, OXYGEN, POSITIVE PRESSURE, CRU-79/P
MIL P 26517 : A	POWER SUPPLY, TRANSFORMER-RECTIFIER, AIRCRAFT, GENERAL SPECIFICATION FOR
MIL C 82594 : 0	CORROSION PREVENTIVE COMPOUND AND SURFACE SEALER FOR NONFERROUS METALS
AN 844 : 0013	ELBOW - PIPE TO HOSE, 45 DEGREES
MS 3180 : G	CONNECTORS, ELECTRICAL CIRCULAR, COVER, PROTECTIVE, PLUG, MIL-DTL-26482 SERIES 1 AND 2, BAYONET COUPLING
MIL DTL 39030/11 : A	DUMMY LOAD, ELECTRICAL, COAXIAL, TYPE 5 (N), HIGH POWER
MIL DTL 28754/9 : E	CONNECTORS, ELECTRICAL, MODULAR, TYPE 4, DOUBLE SPAN, CONNECTOR ASSEMBLY, (DIP FRAME)
MIL DTL 24251/3 : D	SHIELD, ELECTRON TUBE, HEAT DISSIPATING 7 AND 9 PIN, MINIATURE (SPLIT SHELL)
MIL PRF 22885/114 : 0	SWITCHES, PUSHBUTTON, WHITE LIGHT EMITTING DIODE (LED) OR 4 LAMP REPLACEABLE INCANDESCENT ILLUMINATED, STANDARD, NIGHT VISION IMAGING SYSTEM (NVIS) AND SUNLIGHT READABLE DISPLAYS, DIMMABLE, SPDT, DPDT AND 4PDT, LOW LEVEL TO 7 AMPERES, SEALED AND UNSEALED, SOLDER AND COMMON TERMINATION SYSTEM (CTS) TERMINATIONS
MIL T 19576 : A	TRANSMITTER, REMOTE COMPASS, THIN WING TYPE ML-1 (UNSTABILIZED)
MIL C 28748/5 : D	CONNECTOR, ELECTRICAL, RECTANGULAR, RACK AND PANEL, SOLDER TYPE PIN CONTACTS, SIZE 2O
MIL D 9063 : B	DESEALANT, INTEGRAL FUEL AND OIL TANKS
MS 24132 : G	SHIELD, ELECTRICAL, CONNECTOR, FOR 7, 9, 14, 20, AND 26 RACK AND PANEL CONTACT CONNECTORS
MIL C 55302/26 : E	CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES, PLUG 30 THRU 140- CONTACT POSITIONS, FOR PRINTED WIRING BOARDS (.100SQ. GRID)
MIL S 25057 : B	SCREEN SYSTEM, AIR INLET, AIRCRAFT TURBINE ENGINE, GENERAL SPECIFICATION FOR
MS 18192 : G	SHIELD, ELECTRICAL CONNECTORS FOR 7, 9, 14, 20, 26, 34, 42, 50 AND 75 CONTACT CONNECTORS
MIL I 5133 : C	INDICATOR, ATTITUDE TYPE J 8
MIL G 22077 : C	GENERATOR SETS, GAS TURBINE, DIRECT AND ALTERNATING CURRENT NAVAL SHIPBOARD USE
MIL C 38999 : J	CONNECTOR, ELECTRICAL, CIRCULAR, MINIATURE, HIGH DENSITY, QUICK DISCONNECT (BAYONET THREADED & BREECH COUPLING) ENVIRONMENT RESISTANT, REMOVABLE CRIMP & HERMETIC SOLDER CONTACTS
MIL DTL 83526/21 : C	CONNECTOR, FIBER OPTIC, CIRCULAR HERMAPHRODITIC, BULKHEAD, LOW PROFILE WITHOUT STRAIN RELIEF, JAM-NUT MOUNT, 2 AND 4 POSITIONS, EXPANDED BEAM
MS 3181 : G	CONNECTORS, ELECTRICAL CIRCULAR, COVER, PROTECTIVE, RECEPTACLE, MIL-DTL-26482 SERIES 1 AND 2, BAYONET COUPLING
MIL C 5604 : B	COMPASS, MAGNETIC, PILOTS STANDBY
MIL S 85377 : A	SWITCH, STEPPING, DIRECT CURRENT AIRCRAFT DISPENSER
AN 807 : 0007	ADAPTER, STRAIGHT, TUBE TO HOSE
MS 27067 : D	ELBOW SUBASSEMBLY, FLARED, 45 DEGREES FORGED, SWIVEL NUT
MIL C 46941 : A	CARTRIDGE, IMPULSE, M146 ASSEMBLY
MIL PRF 23377 : K	PRIMER COATINGS: EPOXY, HIGH-SOLIDS
MIL H 87111 : A	HEAT SINKS, SEMICONDUCTOR DEVICES, GENERAL SPECIFICATION FOR
MIL HDBK 1250 : A	CORROSION PREVENTION AND DETERIORATION CONTROL IN ELECTRONIC COMPONENTS AND ASSEMBLIES
MIL C 43616 : C	CLEANING COMPOUND, AIRCRAFT SURFACE
MIL I 23870 : 0	INDICATOR, FUEL RATE OF FLOW, 0 TO 15 GPM
MIL STD 1516 : B	UNIFIED CODE FOR COATINGS AND FINISHES FOR DOD MATERIAL
MIL P 7034 : D	PULLEY, GROOVE, ANTIFRICTION BEARING, GREASE LUBRICATED, AIRCRAFT
MIL DTL 52525/13 : C	FITTINGS, HOSE, CRIMP TYPE, SPLIT-FLANGE STRAIGHT
MIL DTL 38999 : M	CONNECTORS, ELECTRICAL, CIRCULAR, MINIATURE, HIGH DENSITY, QUICK DISCONNECT (BAYONET, THREADED OR BREECH COUPLING), ENVIRONMENT RESISTANT WITH CRIMP REMOVABLE CONTACTS OR HERMETICALLY SEALED WITH FIXED, SOLDERABLE CONTACTS, GENERAL SPECIFICATION FOR
MIL S 6150 : D	STARTER, ENGINE, ELECTRICAL, DIRECT CRANKING, AIRCRAFT 28 VOLT DC
MIL STD 2198 : 0	DESIGN REQUIREMENTS FOR METAL ELECTRICAL BACKPLANE ASSEMBLIES
MIL DTL 32464 : A	FITTINGS, ADAPTER, HYDRAULIC AND PNEUMATIC, 37 DEGREES SPHERICAL TO ANPT CONNECTORS, 1500 TO 3000 PSI, GENERAL SPECIFICATION FOR
MIL S 83427 : 0	SURVIVAL KIT CONTAINERS, CNU-129(V)/P AND CNU-130/P
MIL C 60604 : A	CARTRIDGE, THRUSTER, M119
MIL C 38271 : B	CONNECTOR, OXYGEN MASK TO REGULATOR CRU-60/P
MIL F 24666 : 0	FILTER ELEMENT, SHIP FUEL SYSTEM PREFILTER, NONCLEANABLE, HIGH EFFICIENCY
MIL C 6864 : C	CLEANING COMPOUND, SOLVENT, OIL COOLER
MIL DTL 24127 : A	EDUCTORS, GASOLINE, OIL, OR WATER
TT P 2756 : A	POLYURETHANE COATING - SELF-PRIMING TOPCOAT, LOW VOLATILE ORGANIC COMPOUND (VOC) CONTENT
ASTM F 901 : 2001 : R2012	Standard Specification for Aluminum Transmission Tower Bolts and Nuts
MIL L 58085 : A	LIGHT, BEACON, ANTI COLLISION AIRCRAFT
MIL STD 2131 : A	LAUNCHER, EJECTION GUIDED MISSILE, AIRCRAFT, GENERAL DESIGN CRITERIA FOR
MIL T 704 : K	TREATMENT AND PAINTING OF MATERIAL
MS 20760 : D	ADAPTER, STRAIGHT, FLANGE TO TUBE
MIL DTL 32371 : 0	FITTINGS, ADAPTER, HYDRAULIC AND PNEUMATIC, SPHERICAL TO ORFS CONNECTORS, 1500 TO 3000 PSI, GENERAL SPECIFICATION FOR
MIL P 8564 : D	PNEUMATIC SYSTEM COMPONENTS, AERONAUTICAL, GENERAL SPECIFICATION FOR [ASG]
MIL B 8075 : D	BRAKE CONTROL SYSTEMS, ANTI SKID, AIRCRAFT WHEELS, INSTRUCTIONS FOR PREPARATION OF
MIL M 85831 : 0	MASK, HELICOPTER AIRCREWMAN, CHEMICAL, BIOLOGICAL, RADIOLOGICAL PROTECTIVE, NON-OXYGEN
SAE AS 17852 : 2012	REDUCERS, OXYGEN PRESSURE
MIL DTL 28754 : E	CONNECTORS, ELECTRICAL, MODULAR, AND COMPONENT PARTS GENERAL SPECIFICATION FOR
MIL DTL 83526/20 : C	CONNECTOR, FIBER OPTIC PLUG, CIRCULAR HERMAPHRODITIC, IN-LINE MOUNT, 2 AND 4 POSITIONS, EXPANDED BEAM
MIL I 38715 : B	INDICATOR, COMBUSTIBLE GAS AND TOXIC GAS
MIL L 8937 : D	LUBRICANT, SOLID FILM, HEAT CURED, CORROSION INHIBITING, [NATO CODE NUMBER S 1738]
MIL T 53055 : C	TANK, 3,000 GALLON & 4600 GALLON FABRIC, COLLAPSIBLE, DRINKING WATER, SEMI-TRAILER MOUNTED
MIL F 7179 : G	FINISHES, COATINGS, AND SEALANTS FOR THE PROTECTION OF AEROSPACE WEAPONS SYSTEM
MIL S 83352 : B	SIGNAL KIT, PERSONNEL, DISTRESS, A/P25S-5A
MIL C 4928 : A	CHARGER, BATTERY, SILICON DIODE, TYPE A-1
MIL A 63576 : A	ALUMINUM OXIDE COATINGS, LUBRICATIVE, FOR ALUMINUM AND ALUMINUM ALLOYS
MIL C 83723 : E	CONNECTORS, ELECTRICAL (CIRCULAR, ENVIRONMENT RESISTING) RECEPTACLES AND PLUGS GENERAL SPECIFICATION FOR
MIL DTL 85110 : B	BAR, REPEATABLE RELEASE HOLDBACK (RRHB), AIRCRAFT LAUNCHING, GENERAL REQUIREMENT FOR
SAE AS 85731 : 2015	FASTENER, POSITIVE LOCKING, ELECTRONIC EQUIPMENT, GENERAL SPECIFICATION FOR
SAE AS 18280 : 2017	FITTINGS, 24 DEGREES CONE FLARELESS, FLUID CONNECTION, 3000 PSI
NASM 24694 : 0	SCREW, MACHINE, FLAT COUNTERSUNK HEAD, 100 DEGREES, STRUCTURAL, CROSS RECESSED, UNC-3A AND UNF-3A
SAE AS 85028 : 2017	CONNECTOR, ELECTRICAL, RECTANGULAR, INDIVIDUAL CONTACT SEALING, POLARIZED CENTER JACKSCREW, GENERAL SPECIFICATION FOR
SAE AS 1701 : 2017	LUBRICANT, SOLID FILM
SAE AS 5994 : 2013	PUMP UNITS, HYDRAULIC, ELECTRIC MOTOR DRIVEN, VARIABLE DELIVERY
MIL G 18997 : E	GAUGE, PRESSURE, DIAL INDICATING
DSCC 84103 : J	HOLDER, ELECTRICAL CARD, WEDGE RETAINER, 3-PIECE, SCREW ACTUATED
MIL DTL 5421 : D	TUBES, PITOT, ELECTRICALLY HEATED, AIRCRAFT
MIL DTL 85061C : 2009	COUPLING, FUEL LINE, FLEXIBLE, 125 PSI
MIL DTL 83796/18 : A	HOSE ASSEMBLY, RUBBER, LIGHTWEIGHT, MEDIUM PRESSURE, INTERNAL SUPPORT COIL, FIELD ATTACHABLE END FITTINGS, FLANGE TO FLANGE
MIL PRF 81975 : C	COUPLINGS, REGULATED, AERIAL PRESSURE REFUELING TYPE MA-2, TYPE MA-3 AND TYPE MA-4
MIL DTL 26633 : F	HOSE ASSEMBLY, NONCONDUCTIVE, POLYTETRAFLUOROETHYLENE, OXYGEN
MIL C 83982 : 0	COMPOUND, SEALING, FLUID RESISTANT
MS 18199 : C	PLATE, RETAINING, RECEPTACLE ELECTRICAL CONNECTOR, FOR 34, 42, 50 AND 75 CONTACT CONNECTORS
MIL DTL 52525/5 : D	FITTINGS, HOSE, SCREW-ON TO 37 DEGREES FLARE FEMALE SWIVEL, STRAIGHT
MIL DTL 52525/34 : B	FITTINGS, HOSE, SCREW-ON TO 4-BOLT SPLIT-FLANGE, STRAIGHT
MIL DTL 52525/2 : C	FITTINGS, HOSE, SCREW-ON TO 37 DEGREES FLARE FEMALE SWIVEL, 45 DEGREES BENT TUBE
MIL M 9397 : E	FREQUENCY CONVERTER, MOBILE, TYPE MC-1A
MS 27064 : E	ELBOW SUBASSEMBLY, SWIVEL FLANGE, 45 DEGREES
MIL S 6807 : D	SWITCHES, ROTARY, SELECTOR POWER - GENERAL SPECIFICATION FOR
MIL S 28827 : A	SWITCH, THERMOSTATIC, (VOLATILE LIQUID) HERMETICALLY SEALED GENERAL SPECIFICATION FOR
A A 59812 : A	HOLDER, ELECTRICAL CARD, METAL CARD GUIDE, MULTIPLE PIECE, GENERAL REQUIREMENTS FOR
SAE AS 8181 : 1997	DETECTOR, ICE, AIR INTAKE DUCT, AIRCRAFT ENGINES AND AIRFRAME SYSTEMS, GENERAL SPECIFICATION FOR
FAA AC 150/5345-45 : 2007	LOW-IMPACT RESISTANT (LIR) STRUCTURES
MIL C 24356 : A	COUPLING, SEGMENTED AND SPLIT CLAMPS REATTACHABLE, 2-1/2-, 4-, 6- AND 7- INCH, FOR REFUELING-AT-SEA HOSE
MIL B 36492 : 0	BED, ORTHOPEDIC
MIL T 25193 : B	TRANSMITTER, REMOTE COMPASS, TYPE C-2 (UNSTABILIZED)
MIL I 8474 : C	INSPECTION OF ALUMINUM ALLOY PARTS, ANODIZING PROCESS FOR
MIL I 5418 : B	INDICATOR: AIRSPEED, PITOT STATIC, SENSITIVE, 50-650 KNOTS
MIL S 8812 : D	STEERING SYSTEM, AIRCRAFT GENERAL REQUIREMENTS FOR
MIL C 46946 : B	CARTRIDGE, IMPULSE, M43 ASSEMBLY
ASTM F 901 : 2001	Standard Specification for Aluminum Transmission Tower Bolts and Nuts
MIL T 5421 : B	TUBE, PITOT, ELECTRICALLY HEATED, AIRCRAFT
MIL DTL 83796/15 : A	HOSE ASSEMBLY, RUBBER, LIGHTWEIGHT, MEDIUM PRESSURE, INTERNAL SUPPORT COIL, FIELD ATTACHABLE END FITTINGS, FLARE TO FLANGE, WITH LOCKWIRE HOLE
MS 27075 : D	NIPPLE, FLARED, TUBE TO HOSE - SWIVEL NUT
MIL I 70756 : 0	INERT PROJECTILE ASSEMBLY LESS ESCAPEMENT ASSEMBLY METAL PARTS AND ASSEMBLING AND PACKAGING
MIL C 27725 : B	COATING, CORROSION PREVENTIVE, FOR AIRCRAFT INTEGRAL FUEL TANKS
MS 27071 : D	UNION, NIPPLE
MIL W 8604 : A	WELDING, FUSION, ALUMINUM ALLOYS, PROCESSING AND PERFORMANCE OF
MIL M 7997 : C	MOTOR, AIRCRAFT HYDRAULIC, CONSTANT DISPLACEMENT GENERAL SPECIFICATION FOR
MIL C 83873 : A	CLEANING COMPOUND, PRECOATING SURFACE, AIRCRAFT & AEROSPACE GROUND EQUIPMENT (AGE)
MIL DTL 26482 : H	CONNECTORS, ELECTRICAL, CIRCULAR, MINIATURE, QUICK DISCONNECT, ENVIRONMENT RESISTING, RECEPTACLES AND PLUGS, GENERAL SPECIFICATION FOR
MIL C 81904 : B	COATING COMPOUND, THERMAL INSULATION, ABLATIVE
MIL K 8662 : E	KNIFE, HUNTING, SHEATHED, SURVIVAL PILOT S
TT R 248 : B	REMOVER, PAINT AND LACQUER, SOLVENT TYPE
MIL PRF 46010 : H	LUBRICANT, SOLID FILM, HEAT CURED, CORROSION INHIBITING NATO CODE S-1738
MIL DTL 28754/25 : B	CONNECTORS, ELECTRICAL, MODULAR, GUIDE, RETAINING
MIL A 24533 : B	ACTUATORS, ROTARY HYDRAULIC RACK AND PINION
MIL HDBK 510-1 : A	AEROSPACE FUELS CERTIFICATION
MIL DTL 3928 : H	SWITCHES, RADIO-FREQUENCY TRANSMISSION LINE, (COAXIAL AND MICROSTRIP), GENERAL SPECIFICATION FOR
MIL DTL 19068 : B	VALVES, SHUTTLE, HYDRAULIC, AIRCRAFT, TYPE 2 SYSTEMS
MS 20762 : D	ELBOW, FLARED TUBE, FLANGED, SWIVEL, 90 DEGREES
MIL DTL 50647 : B	CARTRIDGE, DELAY, M293 ASSEMBLY
MS 27068 : D	ELBOW SUBASSEMBLY, FLARED, 90 DEGREES FORGED, SWIVEL NUT
MIL F 18264 : D	FINISHES: ORGANIC, WEAPONS SYSTEM, APPLICATION AND CONTROL OF
MS 27390 : C	ELBOW SUB ASSEMBLY, FLARELESS, 90 DEGREES, FORGED, SWIVEL NUT
MIL P 21563 : B	POINT SYSTEM, FLUORESCENT, FOR AIRCRAFT APPLICATION (ASA)
MIL DTL 3954 : D	DUMMY LOADS, ELECTRICAL, WAVEGUIDE, GENERAL SPECIFICATION FOR
NASM 23460 : 2004	PIN, QUICK-RELEASE, SELF-RETAINING, POSITIVE-LOCKING
NASA MSFC STD 156 : 1962	RIVETING, FABRICATING AND INSPECTION, STANDARD FOR
DSCC 85122 : G	INDICATOR ASSEMBLIES: RED, YELLOW, GREEN; PLAIN AND FILTERED LENSES; PANEL-SEALED, AND PANEL AND REAR SEALED
MIL-DTL-7034F:2005	PULLEYS, GROOVE, ANTIFRICTION BEARING, GREASE LUBRICATED, AIRCRAFT, GENERAL SPECIFICATION FOR
MIL PRF 6864 : F	CLEANING COMPOUND, SOLVENT, OIL COOLER
MIL S 85510 : 0
MIL DTL 7899 : D	VALVES, CHECK, AIRCRAFT FUEL SYSTEM
NASA PRC 5006 : 2003	PROCESS SPECIFICATION FOR THE ANODIZING OF ALUMINUM ALLOYS
MIL E 917 : E	ELECTRIC POWER EQUIPMENT, BASIC REQUIREMENTS (NAVAL SHIPBOARD USE)
MIL S 7852 : B	SEAT, AIRCREW, ADJUSTABLE SWIVEL TYPE E-1
MIL B 26793 : B	BLOWER, GASOLINE ENGINE DRIVEN, TYPE A-1
MIL A 26107 : D	AIR CONDITIONER, TRAILER-MOUNTED, FREON CYCLE, 11-1/2 TON REFRIGERATING CAPACITY, TYPE MA-3
MIL A 6425 : B	ADAPTOR, PRESSURE FUEL SERVICING, AIRCRAFT, GENERAL SPECIFICATION FOR
MIL C 38404 : E	COUPLING, HOSE, REATTACHABLE SCREW-ON
MIL A 38331 : 0	AMPLIFIER-POWER SUPPLY AM-4080/ASN-55, LEVELLING
MIL F 50994 : 0	FUZE, ROCKET M423 MODIFIED (BUNKER) LESS BOOSTER AND LEAD
MIL V 8610 : B	VALVE, FUEL SHUTOFF SOLENOID OPERATED, 28 VOLT, DC
MIL S 49036 : 0	SUPPRESSOR, ELECTRICAL TRANSIENT
MIL F 50905 : 0	FUZE, ROCKET, M427, MOD 5 LOADING ASSEMBLING AND PACKING
MIL B 48600 : A	BASE PLUG ASSEMBLY
SAE AS 22520 : 2011	CRIMPING TOOLS, WIRE TERMINATION, GENERAL SPECIFICATION FOR
MIL I 27273 : A	INVERTER, POWER, STATIC, GENERAL SPECIFICATION FOR
MIL G 8798 : 0	GAGE SYSTEM, FUEL QUANTITY, CAPACITOR TYPE NONVACUUM TUBE, INTEGRALLY LIGHTED GENERAL SPECIFICATION FOR
MIL I 21203 : A	INDICATOR, ATTITUDE, SPHERICAL, DIRECT READING, FAST ERECTING, ELECTRIC GYRO
MIL V 8057 : F	VALVE, OXYGEN, PRESSURE BUILDUP AND VENT
MIL DTL 8348 : K	GAGE ASSEMBLIES, AIR PRESSURE, DIAL INDICATING CHUCK TYPE, SELF-CONTAINED
MIL A 19940 : 0	AMPLIFIER, CONTROL SINGLE CHANNEL, S-2 COMPASS
MIL G 22169 : 0	GYRO, VERTICAL AND MOUNT
MIL DTL 32373 : 0	PLUG, MACHINE THREAD, MAGNETIC: DRAIN
MIL C 18053 : A	CONTROL AMPLIFIER, ALTITUDE (P-1 AUTOMATIC PILOT RADAR SET, AN/APN-22)
MIL F 85731 : 0	FASTENER, POSITIVE LOCKING, ELECTRONIC EQUIPMENT GENERAL SPECIFICATION FOR
MIL D 60873 : A	DELAY ELEMENT, CARTRIDGE, XM69, ASSEMBLY
MIL L 13629 : C NOTICE 1	LACQUER, AIR DRYING FOR CRIMPED PARTS
MS 28760 : E	FITTING END, STRAIGHT, ATTACHABLE, HYDRAULIC AND PNEUMATIC, HIGH PRESSURE HOSE 3000 PSI, FLARED TUBE
MIL H 9890 : E	HARDWARE, INDIVIDUAL LOAD CARRYING EQUIPMENT: AND HARDWARE, MISCELLANEOUS
MIL T 0053055 : B	TANK, 3000 GALLON & 4600 GALLON FABRIC, COLLAPSIBLE, DRINKING WATER, SEMI-TRAILER MOUNTED
MIL A 7237 : B	AIR INDUCTION SYSTEM, RECIPROCATING ENGINE, GENERAL SPECIFICATION FOR
MIL L 0046010 : D	LUBRICANT, SOLID FILM, HEAT CURED, CORROSION INHIBITING
MIL T 5350 : E	TRANSMITTER, SYNCHRO OPERATED, AIRCRAFT, GENERAL SPECIFICATION FOR
MIL DTL 6807 : F	SWITCHES, ROTARY, SELECTOR POWER, GENERAL SPECIFICATION FOR
NASM 24693 : 0	SCREW, MACHINE, FLAT COUNTERSUNK HEAD, 100 DEGREES, CROSS RECESSED, UNC-2A AND UNF-2A
MIL PRF 64266 : B	CONNECTORS, FIBER OPTIC, CIRCULAR AND RECTANGULAR, PLUG AND RECEPTACLE STYLE, MULTIPLE REMOVABLE GENDERLESS TERMINI, ENVIRONMENT RESISTING GENERAL SPECIFICATION FOR
MIL PRF 46147 : D	LUBRICANT, SOLID FILM, AIR CURED, CORROSION INHIBITING
MIL R 19750 : A	REGULATOR; VOLTAGE, 28 V, 120 DEGREE C, FOR 30 V DIRECT-CURRENT GENERATOR, GENERAL SPECIFICATION FOR
MIL P 19834 : B	PLATE, IDENTIFICATION, METAL FOIL, ADHESIVE BACKED
MIL R 50781 : 0	RESOLVER, ELECTRICAL LINEAR GENERAL SPECIFICATION FOR
SAE AS 4060 : 2013	TUBE FITTINGS SWAGED JOINT, ROLLER EXPANDER, MANUAL PROCESS, REQUIREMENTS FOR
MIL DTL 32460 : A	ADAPTER, HYDRAULIC AND PNEUMATIC, 37 DEGREES FLARE TUBE FITTING TO ORFS CONNECTORS, 1500 TO 3000 PSI AND -65 DEGREES F TO 250 DEGREES F, GENERAL SPECIFICATION FOR
MIL DTL 83796/1 : C	HOSE ASSEMBLY, RUBBER, LIGHTWEIGHT, MEDIUM PRESSURE, FIELD ATTACHABLE END FITTINGS, FLARE TO FLARE
MIL DTL 83796/5 : D	HOSE ASSEMBLY, RUBBER, LIGHTWEIGHT, MEDIUM PRESSURE, FIELD ATTACHABLE END FITTINGS, FLARE TO FLANGE
MIL DTL 83798 : D	FITTING, RUBBER HOSE, LIGHTWEIGHT, MEDIUM PRESSURE, GENERAL SPECIFICATION FOR
MIL DTL 15291 : G	SWITCHES, ROTARY, SNAP ACTION AND DETENT/SPRING RETURN ACTION, GENERAL SPECIFICATION FOR
MIL P 63514 : A	PROJECTILE, 105MM, TP-T, M489A1, METAL PARTS ASSEMBLY
MIL DTL 52525/38 : B	FITTINGS, HOSE, SCREW-ON TO 37 DEGREES FLARE FEMALE SWIVEL, 45 DEGREES BENT TUBE
MIL B 29186 : 0	BARRIER SYSTEM: FLOATING, OIL AND DEBRIS CONTAINMENT (FOR PERMANENT INSTALLATION)
FF N 845 : D	NUT, PLAIN, WING, INCH AND METRIC
MIL DTL 83796/13 : 0	HOSE ASSEMBLY, RUBBER, LIGHTWEIGHT, MEDIUM PRESSURE, INTERNAL SUPPORT COIL, FIELD ATTACHABLE END FITTINGS, FLARELESS TO FLARELESS, WITH LOCKWIRE HOLE
MIL DTL 52525/3 : D	FITTINGS, HOSE, SCREW-ON TO 37 DEGREES FLARE FEMALE SWIVEL, 90 DEGREES BENT TUBE, SHORT DROP
MIL L 81329 : C	LUBRICANT, SOLID FILM, EXTREME ENVIRONMENT, NATO CODE NUMBER S-1737, METRIC
MIL V 5461 : C	VALVE, VACUUM BREAKING
MIL T 7771 : B	TUBE, EXTENSION, GYRO STABILIZED DRIFT METER
MIL PRF 85285 : E	COATING: POLYURETHANE, AIRCRAFT AND SUPPORT EQUIPMENT
MIL A 38726 : 0	ADAPTER ASSEMBLY, REUSABLE, FLEXIBLE HOSE, LOW PRESSURE
MIL C 83821 : 0	CRANE, WHEEL MOUNTED, CRASH, ROUGH TERRAIN, HYDRAULIC FULL REVOLVING, 4X4, DED, FIGHTER TYPE AIRCRAFT
MIL PRF 22885/115 : 0	SWITCHES, PUSHBUTTON, ULTRA-COMPACT, LED ILLUMINATION, NVIS, SEALED
MIL I 82356 : NOTICE 1	INSTRUMENTS, SIMULATED, FOR AIRCRAFT TRAINING DEVICES; GENERAL SPECIFICATION FOR
MIL P 19692 : E	PUMPS, HYDRAULIC, VARIABLE FLOW, GENERAL SPECIFICATION FOR
MIL C 28748/6 : D	CONNECTOR, ELECTRICAL, RECTANGULAR, RACK AND PANEL, SOLDER TYPE SOCKET CONTACTS, SIZE 2O
MIL D 43699 : C	DRUMS, FABRIC, COLLAPSIBLE, (DRINKING WATER, 55-,250- & 500 GALLON CAPACITIES)
MIL C 63063 : 0	CASE, CARTRIDGE, 40MM, M169; PLUG, BASE FOR
MIL C 18438 : B	CHARGER, BATTERY, GENERATOR TYPE
MIL HDBK 349 : 0	MANUFACTURE AND INSPECTION OF ADHESIVE BONDED, ALUMINUM HONEYCOMB SANDWICH ASSEMBLIES FOR AIRCRAFT
MIL S 22710 : E	SWITCHES, ROTARY (PRINTED CIRCUIT), (THUMBWHEEL, INLINE, AND PUSHBUTTON), GENERAL SPECIFICATION FOR
MIL F 5509 : D	FITTING, FLARED TUBE, FLUID CONNECTION
MS 27062 : D	NIPPLE SUBASSEMBLY, STRAIGHT, SWIVEL FLANGE
MIL P 81985 : 0	PEENING OF METALS
MIL DTL 60247 : B	CARTRIDGE, DELAY, M155 ASSEMBLY
MIL A 81852 : A	ALTIMETER-ENCODER AAU-32/A
MIL PRF 83936 : C	REMOVER, PAINT, TANK TYPE - FOR AIRCRAFT WHEELS, LANDING GEAR COMPONENTS AND OTHER AIRCRAFT AND SUPPORT EQUIPMENT
MIL I 22075 : C	INDICATOR, BEARING DISTANCE-HEADING; ID - 663D/U
MIL I 85832 : 0	INTERCOM, HELICOPTER AIRCREWMAN, CHEMICAL, BIOLOGICAL, RADIOLOGICAL PROTECTIVE SET
SAE AMS P 21600 : 2013	PAINT SYSTEM, FLUORESCENT, REMOVABLE, FOR AIRCRAFT APPLICATION
MS 20757 : C	CONNECTOR, FIXED FLANGE, TO HOSE
DOD M 24672 : 0	MOLDS, AND MOLD HEATING PLATEN FOR MOLDING ELECTRICAL CONNECTORS AND CABLES (METRIC)
MIL R 47321 : 0	REGULATOR, PRESSURE
MIL D 28803 : A	DISPLAY, OPTOELECTRONIC, READOUTS, BACK LIGHTED SEGMENTED, GENERAL SPECIFICATION FOR
MIL S 45310 : H NOTICE 1	SEMITRAILER, TANK, GASOLINE AND FUEL OIL, COMMERCIAL
MIL C 22263 : B	COUPLING FUEL LINE, FLEXIBLE, 125 PSI, GENERAL SPECIFICATION FOR
MS 18204 : F	SHELL, ELECTRICAL, CONNECTOR, RECEPTACLE, RECTANGULAR, POLARIZING
MIL STD 808 : A	FINISH, MATERIALS AND PROCESSES FOR CORROSION PREVENTION AND CONTROL IN SUPPORT EQUIPMENT
MIL C 5033 : C	CLOCK, AIRCRAFT, CIVIL DATE 24 HOUR DIAL 2 3/4 IN DIAMETER
MIL B 233 : D	BOXES, SUPPLY SUPPORT ITEMS, STOWAGE AND STORAGE
MIL A 47309 : A	AMPLIFIER, PNEUMATIC
A A 55628 : A	NUT, PLAIN, CAP, HIGH CROWN UNC-2B AND UNF-2B
MIL S 25073 : 0
MS 20756 : F	FLANGE, SWIVEL, RETAINING
MIL DTL 28754/7 : D	CONNECTORS, ELECTRICAL, MODULAR, TYPE 4, SINGLE SPAN, CONNECTOR ASSEMBLY
MIL A 23547 : E	ANTENNA COUPLER, CU-9370/UR
MIL DTL 52525/9 : C	FITTINGS, HOSE, SCREW-ON TO 37 DEGREES FLARE FEMALE SWIVEL, STRAIGHT
MIL T 25439 : A (1)	TRANSMITTER, RATE OF FLOW, IN-FLIGHT REFUELLING, 0-10,000 PPM, TYPE MB-3
MIL DTL 83796/3 : C	HOSE ASSEMBLY, RUBBER, LIGHTWEIGHT, MEDIUM PRESSURE, FIELD ATTACHABLE END FITTINGS, FLARELESS TO FLARELESS
MIL C 85642 : 0	COMMUNICATIONS CENTRAL AN/ASC-26
MIL B 38401 : A	BEACON SET, RADIO AN/URT-33
MIL I 6839 : C	INDICATOR, POSITION, LANDING GEAR
MIL H 53062 : 0	HOSE ASSEMBLY, RUBBER LIGHTWEIGHT, COLLAPSIBLE 6 INCH; FOR POL SERVICE
FF W 84 : A	WASHER, LOCK (SPRING)
MIL C 50446 : A	CASE, CARTRIDGE, 40MM, M118 PARTS FOR
MIL A 81851 : B	ALTIMETER AAU-31/A
MIL T 27200 : C	TRANSMITTER, RATE GYROSCOPE TRU-2A/A
MIL T 48295 : 0	TEST SET, ELECTRICAL CIRCUIT, BOMB DISPENSER A/E 24T-79
AN 914 : 0011	ELBOW, PIPE, INTERNAL AND EXTERNAL THREAD, 90 DEGREES
MIL S 58112 : 0	SLING, MULTI LEG, HELICOPTER, EXTERNAL CARGO
MIL DTL 25308 : C	GAGE, PRESSURE, DIAL INDICATING, HYDRAULIC, TYPE ME-1
MIL DTL 83796/9 : C	HOSE ASSEMBLY, RUBBER, LIGHTWEIGHT, MEDIUM PRESSURE, FIELD ATTACHABLE END FITTINGS, FLANGE TO FLANGE
MIL C 22520 : F	CRIMPING TOOLS, TERMINAL HAND OR POWER ACTUATED, WIRE TERMINATION AND TOOL KITS - GENERAL SPECIFICATION FOR
SAE AS 19692 : 2016	AEROSPACE - MILITARY TYPE VARIABLE DELIVERY, PRESSURE COMPENSATED HYDRAULIC PUMP
ASTM D 2651 : 2001	Standard Guide for Preparation of Metal Surfaces for Adhesive Bonding
MIL A 27328 : 0	AMPLIFIER-INDICATOR GROUP, ALTITUDE VERTICAL SPEED A/A24G-7
SAE ARP 1281 : 2002	ACTUATORS: AIRCRAFT FLIGHT CONTROLS, POWER OPERATED, HYDRAULIC, GENERAL SPECIFICATION FOR
MIL S 8805/95 : F	SWITCH, PUSH 2 PDT MOMENTARY 1 AMPERE, SEALED AND UNSEALED, EMI AND NON EMI SHIELDED
MIL DTL 28754/94 : A	CONNECTORS, ELECTRICAL, MODULAR, CONNECTOR FRAME, TYPE 4, DIP, 0.4 PITCH, FORMAT C, D AND E
MIL I 7304 : B	INDICATOR, PRESSURE TORQUE SENSITIVE TYPE A 9
MIL I 5488 : A	INDICATOR TURN AND SLIP 28V DC 2 3/4 SIX, TYPE MD 10
MIL I 5482 : C	INDICATOR, PRESSURE, SYNCHRO, AIRCRAFT 165 DEGREE SCALE
FF N 836 : E	NUT, SQUARE, HEXAGON, CAP, SLOTTED, CASTLE, KNURLED, WELDING AND SINGLE BALL SEAT
MIL A 29563 : 0	ANTENNA SYSTEM, AIMS SHIPBOARD, ELECTRONICALLY STEERED OE-120/UPX
MIL DTL 50714 : C	INITIATOR, PROPELLANT ACTUATED, DELAY, M113 ASSEMBLY
MS 20761 : C	ELBOW, FLARED TUBE, FLANGED, SWIVEL, 45 DEGREES
MIL DTL 55302/26 : G	CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: PLUG, 30 THRU 140 CONTACT POSITIONS, FOR PRINTED WIRING BOARDS (.100 SQ. GRID)
MIL C 81790 : A	CONNECTORS, RECEPTACLE, EXTERNAL ELECTRIC POWER, AIRCRAFT, GENERAL SPECIFICATION FOR
SAE AMS P 81985 : 2001	PEENING OF METALS
SAE AS 27194C : 2014(S2018)	SEAL, BONDED, ALUMINUM ALLOY 6061-T6, AMS4027, MOLD IN GROOVE, NBR RUBBER, AMS-P-5315
SAE AS 6449 : 2017	SOLID FILM LUBRICANT
SAE AS 6026 : 2013	CONTROL UNIT, PRESSURE GENERATING, MANUALLY OPERATED, AIRCRAFT HYDRAULIC BRAKE SYSTEM
SAE ARP 4058 : 2017	GENERAL SPECIFICATION GUIDE FOR MECHANICAL GEARED ROTARY ACTUATORS
SAE AMS T 22085 : 1999	TAPES, PRESSURE-SENSITIVE, ADHESIVE, PRESERVATION & SEALING
SAE AS 6450 : 2012(S2019)	LUBRICANT APPLICATION, SOLID FILM, HEAT CURED, POTABLE WATER, HYDRAULIC, AND OTHER FLUID SYSTEMS
SAE AS 4842 : 2016	FITTINGS AND BOSSES, PIPE THREADED, FLUID CONNECTION
SAE AS 1297 : 2008(S2014)	REDUCERS, PNEUMATIC PRESSURE, MISSILE
BS EN 4660-004:2011 (published 2011-03)	Aerospace series. Modular and open avionics architectures Packaging
ASTM F 1110 : 2009 : R2014	Standard Test Method for Sandwich Corrosion Test
MS 24693 : K	SCREW, MACHINE, FLAT COUNTERSUNK HEAD, 100 DEG, CROSS RECESSED, UNC-2A AND UNF-2A (IN./MM)
MIL DTL 28754/47 : C	CONNECTORS, ELECTRICAL MODULAR, TYPE 4, CONNECTOR, 100 PIN, RIGHT ANGLE CONTACT TAILS ON .100 CENTERS
MIL DTL 52525/17 : C	FITTINGS, CLAMP-HALVES, FLANGE TO PORT, FOR 4-BOLT SPLIT-FLANGE
MIL-DTL-45910 D : 2015	INSERT, SCREW THREAD-LOCKED IN AND RING LOCKED, SERRATED GENERAL SPECIFICATION FOR
MIL DTL 83361 : B	INDICATOR, PRESSURE, OIL, DUAL, 0-100 PSI, EGU-18/A
UNI EN 4473 : 2010	AEROSPACE SERIES - ALUMINIUM PIGMENTED COATINGS FOR FASTENERS - TECHNICAL SPECIFICATION
MIL PRF 57267 : 0	COUPLING, AERIAL PRESSURE REFUELING TYPE MA-5
MIL STD 186 : F	PROTECTIVE FINISHING SYSTEMS FOR ROCKETS, GUIDED MISSILES, SUPPORT EQUIPMENT AND RELATED MATERIALS
MIL DTL 28754/10 : D	CONNECTORS, ELECTRICAL, MODULAR, CONNECTOR, TYPE 4, 40 PIN, CONTACT TAILS ON 0.050 CENTERS
MIL DTL 28754/101 : A	CONNECTORS, ELECTRICAL, MODULAR, TYPE 4, CONNECTOR, 0.6 PITCH, 250 CONTACT, CENTER
STANAG 4626 : 2013	MODULAR AND OPEN AVIONICS ARCHITECTURE
MIL DTL 52525/31 : B	FITTINGS, HOSE, SCREW-ON TO 37 DEGREES FLARE FEMALE SWIVEL
A A 59832 : B	EXTRACTOR, ELECTRICAL CARD, METAL, GENERAL REQUIREMENTS FOR
MIL R 19309 : D	RELAY, SENSITIVE (FOR TORPEDO MARK 37 MOD 2)
DOD C 63976 : 0	CASE, CARTRIDGE, 30MM, AMMUNITION FOR M788 M789 AND M799 SERIES OF 30 MM, AMMUNITION
MIL G 6162 : B	GENERATOR AND STARTER GENERATOR, ELECTRIC DIRECT CURRENT, NOMINAL 30 VOLTS AIRCRAFT GENERAL SPECIFICATION
MIL L 23398 : D	LUBRICANT, SOLID FILM, AIR DRYING, CORROSION INHIBITING, NATO CODE NUMBER S 749
MIL DTL 26894 : D	HOSE AND HOSE ASSEMBLY, RUBBER, GASOLINE, REFUELING, LOW TEMPERATURE
MIL DTL 52525 : F	FITTINGS, HOSE, HYDRAULIC, REUSABLE, FIELD-ATTACHABLE AND CLAMP-HALVES, TO MATE WITH SAE-J517 TYPE HOSES, GENERAL SPECIFICATION FOR
MIL DTL 28803 : C	DISPLAY, OPTOELECTRONIC, SEGMENTED READOUTS, BACKLIGHTED, GENERAL SPECIFICATION FOR
I.S. EN 6101:2016	AEROSPACE SERIES - RIVET, 100 DEGREES MEDIUM FLUSH HEAD, CLOSE TOLERANCE - INCH SERIES
MIL F 18280 : F	FITTING, FLARELESS TUBE, FLUID CONNECTION
MIL I 5099 : B	INDICATOR CABIN AIR PRESSURE, 1-7/8 INCH DIAL, TYPE MA-1
MIL I 25725 : A	INDICATOR, TORQUE PRESSURE, MAGNESYN STYLE, SINGLE CLAMP MOUNTED, 2 IN SIZE, 50-400 PSI TYPE A-8
MIL I 18804 : B	INDICATOR, VERTICAL SPEED, 0 - 6000 FPM, 2 INCH
NASA MSFC SPEC 250 : 1963	PROTECTIVE FINISHES FOR SPACE VEHICLE STRUCTURES AND ASSOCIATED FLIGHT EQUIPMENT GENERAL SPECIFICATION FOR
MS 18200 : B	PLATE, RETAINING, RECEPTACLE ELECTRICAL CONNECTOR, FOR SIZE 66 AND 104 CONTACT CONNECTORS
MIL D 6055 : D	DRUM, METAL REUSABLE, SHIPPING AND STORAGE [CAP FROM 88 TO 510 CUBIC INCHES]
MIL I 85889 : 0	IGNITER, JET ASSISTED TAKE OFF (JATO) PROPULSION SYSTEM, GENERAL DEVELOPMENT SPECIFICATION FOR
MIL P 17842 : NOTICE 1	POWER PLANT VIBRATION ISOLATOR, DESIGN AND INSTALLATION REQUIREMENTS
MIL I 38135 : B (3)	INDICATOR, INDICATED AIRSPEED AVU 19/A STANDBY
MIL R 24358 : 0