MIL-DTL-27272 Revision D:2015
Current
Current
The latest, up-to-date edition.
Fittings, Polytetrafluoroethylene Hose, High-Temperature, Medium-Pressure, General Specification for
Available format(s)
PDF
Published date
11-05-2015
Publisher
1. SCOPE
2. APPLICABLE DOCUMENTS
3. REQUIREMENTS
4. VERIFICATION
5. PACKAGING
6. NOTES
Specifies the requirements for fittings for medium-pressure and high-temperature applications with polytetrafluoroethylene (PTFE) hose conforming to MIL-DTL-27267 and MIL-DTL-25579.
This specification covers the requirements for fittings for medium-pressure and high-temperature applications with polytetrafluoroethylene (PTFE) hose conforming to MIL-DTL-27267 and MIL-DTL-25579 (see 3.1 and 6.1).
| DevelopmentNote |
Supersedes MIL F 27272 (B) (10/2003)
|
| DocumentType |
Standard
|
| Pages |
33
|
| PublisherName |
US Military Specs/Standards/Handbooks
|
| Status |
Current
|
| Supersedes |
| MIL-DTL-32434-4 Base Document:2013 | Hose Assembly, Polytetrafluoroethylene, Convoluted, Reusable Fittings, High Temperature, Medium Pressure, Flareless-to-Flange |
| MS27082 Revision E:2014 | ELBOW, NIPPLE END, SWIVEL FLANGE TO HOSE - 90 DEGREES |
| MS27057 Revision E:2013 | Adapter Assembly, Flared, 90 Degrees Elbow, Tube to Hose - with Swivel Nut |
| MS27072 Revision F:2013 | WIRE, RETAINER |
| MS27385 Revision C:2013 | Adapter Assembly, Flareless, 90 Degrees Forged Elbow, Tube to Hose - with Swivel Nut |
| MS27382 Revision C:2013 | Adapter Assembly, Flareless, 45 Degree Elbow, Tube to Hose-with Swivel Nut |
| MS27381 Revision C:2013 | Adapter, Assembly, Flareless, Straight, Tube to Hose - with Swivel Nut |
| MS27086 Revision D:2013 | Elbow, Nipple End, Flared, Tube to Hose - 90 Degrees Swivel Nut |
| MS27060 Revision E:2013 | Adapter Assembly, Flared, 90 Degrees Forged Elbow, Tube to Hose-with Swivel Nut |
| MS27087 Revision D:2013 | Elbow, Nipple End, Flared, Tube to Hose - 45 Degrees Swivel Nut |
| MS27383 Revision C:2014 | ADAPTER ASSEMBLY, FLARELESS, 90 DEGREES ELBOW, TUBE TO HOSE - WITH SWIVEL NUT |
| MS27056 Revision E:2013 | Adapter Assembly, 45 Degrees Elbow, Swivel Flange to Hose |
| MIL-DTL-32434-3 Base Document:2013 | Hose Assembly, Polytetrafluoroethylene, Convoluted, Reusable Fittings, High Temperature, Medium Pressure, Flare-To-Flange |
| MS27077 Revision D:2014 | FLANGE, SWIVEL, RETAINING |
| MS27076 Revision E:2013 | Nipple, Straight, Swivel Flange |
| MS27387 Revision D:2013 | Elbow Subassembly, Flareless, 45 Degrees, Swivel Nut |
| MS8003 Revision E:2016 | HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, REUSABLE FITTINGS, HIGH TEMPERATURE, MEDIUM PRESSURE, FLARELESS-TO-FLANGE |
| MS8001 Revision E:2016 | HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, REUSABLE FITTINGS, HIGH TEMPERATURE, MEDIUM PRESSURE, FLARELESS-TO-FLARELESS |
| MIL-DTL-25579 Revision H:2014 | Hose Assembly, Polytetrafluoroethylene, High Temperature, Medium Pressure, General Specification for |
| MIL-DTL-27267 Revision D:2012 | Hose, Cres Wire Reinforced, Polytetrafluoroethylene, Four Hundred Fifty Degree Fahrenheit, Medium Pressure |
| MS27055 Revision E:2013 | Adapter Assembly, Flared, 45 Degrees Elbow, Tube to Hose - with Swivel Nut |
| MIL-DTL-32435 Base Document:2013 | Hose, Polytetrafluoroethylene, Convoluted, 450 Degrees F, Medium Pressure |
| MS27061 Revision D:2013 | Nipple Subassembly, Flared, Straight - with Swivel Nut |
| MS27389 Revision D:2014 | ELBOW SUB ASSEMBLY, FLARELESS, 45 DEGREES FORGED, SWIVEL NUT |
| MS27067 Revision D:2013 | Elbow Subassembly, Flared, 45 Degrees Forged, Swivel Nut |
| MS8002 Revision E:2016 | HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, REUSABLE FITTINGS, HIGH TEMPERATURE, MEDIUM PRESSURE, FLARE-TO-FLANGE |
| MS27064 Revision E:2014 | ELBOW SUBASSEMBLY, SWIVEL FLANGE, 45 DEGREES |
| MS27075 Revision D:2013 | NIPPLE, FLARED, TUBE TO HOSE - SWIVEL NUT |
| MS8000 Revision E:2016 | HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, REUSABLE FITTINGS, HIGH TEMPERATURE, MEDIUM PRESSURE, FLARE-TO-FLARE |
| MS27071 Revision D:2013 | UNION, NIPPLE |
| MS27068 Revision D:2013 | Elbow Subassembly, Flared, 90 Degrees Forged, Swivel Nut |
| MS27390 Revision C:2013 | Elbow Subassembly, Flareless, 90 Degrees, Forged, Swivel Nut |
| MS27058 Revision E:2013 | Adapter Assembly, 90 Degrees Elbow, Swivel Flange to Hose |
| MS27384 Revision C:2014 | ADAPTOR ASSEMBLY, FLARELESS, 45 DEGREES FORGED ELBOW, TUBE TO HOSE - WITH SWIVEL NUT |
| MS27065 Revision F:2013 | Elbow Subassembly, Flared, 90 Degrees, Swivel Nut |
| MS27062 Revision D:2013 | Nipple Subassembly, Straight, Swivel Flange |
| MS27070 Revision E:2013 | SLEEVE, HOSE COUPLING |
| MIL-DTL-32434 Base Document:2013 | Hose Assembly, Polytetrafluoroethylene, Convoluted, High Temperature, Medium Pressure, General Specification for |
| MS27391 Revision F:2013 | Nipple, Flareless, Tube to Hose - Swivel Nut |
| MS8004 Revision E:2016 | HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, REUSABLE FITTINGS, HIGH TEMPERATURE, MEDIUM PRESSURE, FLANGE-TO-FLANGE |
| MS27063 Revision F:2013 | Elbow Subassembly, Flared, 45 Degrees, Swivel Nut |
| MIL-DTL-32434-1 Base Document:2013 | Hose, Assembly, Polytetrafluoroethylene, Convoluted, Reusable Fittings, High Temperature, Medium Pressure, Flare-to Flare |
| MS27053 Revision E:2013 | Adapter Assembly, Flared, Straight, Tube to Hose - with Swivel Nut |
| MS27394 Revision C:2014 | ELBOW, FLARELESS, TUBE TO HOSE - 90 DEGREE SWIVEL NUT |
| MS27066 Revision F:2013 | Elbow Subassembly, Swivel Flange, 90 Degrees |
| MS27388 Revision D:2014 | ELBOW SUBASSEMBLY, FLARELESS, 90 DEGREES, SWIVEL NUT |
| MS27386 Revision C:2013 | Nipple Subassembly, Flareless, Straight - with Swivel Nut |
| MS27054 Revision E:2013 | Adapter Assembly, Straight, Swivel Flange to Hose |
| MS27069 Revision H:2017 | SOCKET, HOSE COUPLING |
| MS27059 Revision E:2013 | Adapter Assembly, Flared, 45 Degrees Forged Elbow, Tube to Hose - with Swivel Nut |
| MS27395 Revision D:2014 | ELBOW, FLARELESS, TUBE TO HOSE - 45 DEGREES SWIVEL NUT |
| MS27084 Revision D:2014 | ELBOW, NIPPLE END, SWIVEL FLANGE TO HOSE - 45 DEGREES |
| SAE ARP 4925 : 2014 | AEROSPACE DESIGN AND INSTALLATION OF COMMERCIAL TRANSPORT HELICOPTER HYDRAULIC SYSTEMS |
| SAE ARP 4752 : 2013 | AEROSPACE - DESIGN AND INSTALLATION OF COMMERCIAL TRANSPORT AIRCRAFT HYDRAULIC SYSTEMS |
| SAE AS 1701 : 2017 | LUBRICANT, SOLID FILM |
| ISO/IEC 17025:2005 | General requirements for the competence of testing and calibration laboratories |
| MS33786 Revision B:2013 | Fitting, Installation, Flared Tube and Hose, Swivel |
| NAS1760:2015 | FITTING END, FLARELESS ACORN, STANDARD DIMENSIONS FOR |
| MIL-PRF-7808 Revision L:1997 | LUBRICATING OIL, AIRCRAFT TURBINE ENGINE, SYNTHETIC BASE |
| ANSI/NCSL Z540 3 : 2006(R2013) | REQUIREMENTS FOR THE CALIBRATION OF MEASURING AND TEST EQUIPMENT |
| AWS C3.7M/C3.7 : 2011 | SPECIFICATION FOR ALUMINUM BRAZING |
| MIL-PRF-5606 Revision H:2002 | HYDRAULIC FLUID, PETROLEUM BASE; AIRCRAFT, MISSILE, AND ORDNANCE |
| MS27057 Revision E:2013 | Adapter Assembly, Flared, 90 Degrees Elbow, Tube to Hose - with Swivel Nut |
| AWS C3.6M/C3.6 : 2016 | SPECIFICATION FOR FURNACE BRAZING |
| SAE AS 4395 : 2013 | FITTING END, FLARED, TUBE CONNECTION, DESIGN STANDARD |
| AWS C3.5M/C3.5 : 2016 | SPECIFICATION FOR INDUCTION BRAZING |
| MIL-PRF-680 Revision C:2010 | DEGREASING SOLVENT |
| AWS C3.4M/C3.4 : 2016 | SPECIFICATION FOR TORCH BRAZING |
| SAE ARP 908 : 2013 | TORQUE REQUIREMENTS, INSTALLATION AND QUALIFICATION TEST, HOSE AND TUBE FITTING |
| SAE AMS 2672 : 2012 | BRAZING, ALUMINUM TORCH OR FURNACE |
| SAE AS 5272 : 2016 | LUBRICANT, SOLID FILM, HEAT CURED, CORROSION INHIBITING, PROCUREMENT SPECIFICATION |
| SAE AS 8879 : 2004 | SCREW THREADS - UNJ PROFILE, INCH CONTROLLED RADIUS ROOT WITH INCREASED MINOR DIAMETER |
| MS27053 Revision E:2013 | Adapter Assembly, Flared, Straight, Tube to Hose - with Swivel Nut |
| MIL A 8625 : F | ANODIC COATINGS FOR ALUMINUM AND ALUMINUM ALLOYS |
| MIL-DTL-27267 Revision D:2012 | Hose, Cres Wire Reinforced, Polytetrafluoroethylene, Four Hundred Fifty Degree Fahrenheit, Medium Pressure |
| MIL-DTL-25579 Revision H:2014 | Hose Assembly, Polytetrafluoroethylene, High Temperature, Medium Pressure, General Specification for |
| SAE AMS 2673 : 2012 | BRAZING, ALUMINUM AND ALUMINUM ALLOYS MOLTEN FLUX (DIP) |
| SAE AS 2078 : 2015 | TEST METHODS, HOSE ASSEMBLIES, POLYTETRAFLUOROETHYLENE (PTFE) |
| MIL-DTL-25579-1 Base Document:2003 | Hose Assembly Length Measurement for NAS 1760 and MS8000 Series Seal,(Globe Seal, or Radius Seal) to Flareless Fitting End Design |
| SAE AMS 2700E : 2011 | PASSIVATION OF CORROSION RESISTANT STEELS |
| MIL-PRF-83282 Revision D:1997 | HYDRAULIC FLUID, FIRE RESISTANT, SYNTHETIC HYDROCARBON BASE, METRIC, NATO CODE NUMBER H-537 |
| SAE AS 33514 : 2015 | FITTING END, STANDARD DIMENSIONS FOR FLARELESS TUBE CONNECTION AND GASKET SEAL |
| SAE AS 4375 : 2013 | FITTING END, FLARELESS, DESIGN STANDARD |
| ASTM D 471 : 2016-02 | TEST METHOD FOR RUBBER PROPERTY - EFFECT OF LIQUIDS |
| AWS D17.1/D17.1M : 2012 | SPECIFICATION FOR FUSION WELDING FOR AEROSPACE APPLICATIONS |
| MIL-PRF-46010 Revision H:2013 | LUBRICANT, SOLID FILM, HEAT CURED, CORROSION INHIBITING NATO CODE S-1738 |
| MIL-S-7742 Revision D:1991 | SCREW THREADS, STANDARD, OPTIMUM SELECTED SERIES, GENERAL SPECIFICATION FOR |
$32.74
Including GST where applicable
AUD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
PDF - English
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.