|
ASTM F 1941/F1941M : 2016 : REDLINE
|
Standard Specification for Electrodeposited Coatings on Mechanical Fasteners, Inch and Metric
|
|
SAE AMS 5737 : 2012
|
STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS AND TUBING, 15CR - 25.5NI - 1.2MO - 2.1TI - 0.006B - 0.30V, CONSUMABLE ELECTRODE MELTED, 1650 DEGREES F (899 DEGREES C), SOLUTION AND PRECIPITATION HEAT TREATED
|
|
SAE AMS QQ P 416 : 2016
|
PLATING, CADMIUM (ELECTRODEPOSITED)
|
|
SAE AMS 6322 : 2014
|
STEEL BARS, FORGINGS, AND RINGS, 0.50CR - 0.55NI - 0.25MO (0.38 - 0.43C) (SAE 8740)
|
|
MIL-DTL-45932-3 Revision C:2015
|
INSERT, SCREW THREAD - THIN WALL, LOCKED IN, OVERSIZE REPLACER
|
|
SAE AMS 5643 : 2016
|
STEEL, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, MECHANICAL TUBING, AND RINGS, 16CR - 4.0NI - 0.30CB (NB) - 4.0CU, SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE
|
|
MIL-DTL-45932-1 Revision D:2015
|
INSERT, SCREW THREAD - THIN WALL, LOCKED IN
|
|
ASME B46.1 : 2009
|
SURFACE TEXTURE (SURFACE ROUGHNESS, WAVINESS, AND LAY)
|
|
SAE AMS 4650 : 2013
|
COPPER-BERYLLIUM ALLOY, BARS, RODS, SHAPES, AND FORGINGS 98CU - 1.9BE SOLUTION HEAT TREATED TB00 (A)
|
|
MIL-DTL-5541 Revision F:2006
|
Chemical Conversion Coatings on Aluminum and Aluminum Alloys
|
|
SAE AMS 5734 : 2012
|
STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, AND TUBING, 15CR - 25.5NI - 1.2MO - 2.1TI - 0.006B - 0.30V, CONSUMABLE ELECTRODE MELTED, 1650 DEGREES F (899 DEGREES C) SOLUTION HEAT TREATED
|
|
SAE AS 5272 : 2016
|
LUBRICANT, SOLID FILM, HEAT CURED, CORROSION INHIBITING, PROCUREMENT SPECIFICATION
|
|
SAE AMS 5732 : 2012
|
STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, TUBING AND RINGS, 15CR - 25.5NI - 1.2MO - 2.1TI - 0.006B - 0.30V, CONSUMABLE ELECTRODE MELTED 1800 DEGREES F (982 DEGREES C), SOLUTION AND PRECIPITATION HEAT TREATED
|
|
NASM1312-6:2013
|
FASTENER TEST METHODS, METHOD 6, HARDNESS
|
|
ASTM E 1417/E1417M : 2016 : REDLINE
|
Standard Practice for Liquid Penetrant Testing
|
|
SAE AS 8879 : 2004
|
SCREW THREADS - UNJ PROFILE, INCH CONTROLLED RADIUS ROOT WITH INCREASED MINOR DIAMETER
|
|
SAE AMS 5731 : 2012
|
STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS, 15CR - 25.5NI - 1.2MO - 2.1TI - 0.006B - 0.30V, CONSUMABLE ELECTRODE MELTED, 1800 DEGREES F (982 DEGREES C) SOLUTION HEAT TREATED
|
|
SAE AIR 4127 : 2015
|
STEEL: CHEMICAL COMPOSITION AND HARDENABILITY
|
|
SAE AMS 2411 : 2013
|
PLATING, SILVER FOR HIGH TEMPERATURE APPLICATIONS
|
|
SAE AMS 4117 : 2015
|
ALUMINUM ALLOY, ROLLED OR COLD FINISHED BARS, RODS, AND WIRE AND FLASH WELDED RINGS, 1.0MG - 0.60SI - 0.28CU - 0.20CR (6061; -T6, -T651)
|
|
MIL-DTL-45932-2 Revision C:2015
|
INSERT, SCREW THREAD - THIN WALL, LOCKED IN, NON METALLIC LOCKING ELEMENT (-60 DEGREES TO +250 DEGREES FAHRENHEIT)
|
|
SAE AMS 2700E : 2011
|
PASSIVATION OF CORROSION RESISTANT STEELS
|
|
L-P-410 Revision A:1966
|
PLASTIC, POLYAMIDE (NYLON), RIGID: RODS, TUBES, FLATS, MOLDED AND CAST PARTS
|
|
SAE AMS 6370 : 2016
|
STEEL, BARS, FORGINGS, AND RINGS, 0.95CR - 0.20MO (0.28 - 0.33C) (SAE 4130)
|
|
SAE AMS 4128 : 2013
|
ALUMINUM ALLOY BARS, ROLLED OR COLD FINISHED, 1.0MG - 0.60SI - 0.30CU - 0.20CR (6061-T451), SOLUTION HEAT TREATED AND STRESS RELIEVED BY STRETCHING
|
|
SAE AMS QQ A 225/6 : 1998
|
ALUMINUM ALLOY, 2024, BAR, ROD, AND WIRE; ROLLED, DRAWN, OR COLD FINISHED
|
|
FED-STD-H28 Revision A:1994
|
Screw-Thread Standards for Federal Services
|
|
ASTM B 928/B928M : 2015 : REDLINE
|
Standard Specification for High Magnesium Aluminum-Alloy Products for Marine Service and Similar Environments
|
|
MIL-PRF-46010 Revision H:2013
|
LUBRICANT, SOLID FILM, HEAT CURED, CORROSION INHIBITING NATO CODE S-1738
|
|
MIL-S-7742 Revision D:1991
|
SCREW THREADS, STANDARD, OPTIMUM SELECTED SERIES, GENERAL SPECIFICATION FOR
|
Important note : All end users must be registered with an Account prior to user licenses being assigned.