CLEANER, HAND WIPE, FOR AVIATION AND MISSILE SYSTEMS, METALLIC SUBSTRATES, LOW OR EXEMPT VOC

Available format(s)

PDF

Publisher

US Military Specs/Standards/Handbooks

1. SCOPE
2. APPLICABLE DOCUMENTS
3. REQUIREMENTS
4. VERIFICATION
5. PACKAGING
6. NOTES

Specifies hand wipe cleaners that do not contain hazardous air pollutants (HAP) (Clean Air Act 112(b)) and contain a low content of volatile organic compounds (VOC) or an exempt VOC (40 CFR 51.100) for use on aviation and missile systems.

Committee	FSC 6850
DevelopmentNote	NOTICE 1 - Notice of Validation. (11/2017)
DocumentType	Standard
Pages	28
PublisherName	US Military Specs/Standards/Handbooks
Status	NA

ASTM D 1353 : 2013 : REDLINE	Standard Test Method for Nonvolatile Matter in Volatile Solvents for Use in Paint, Varnish, Lacquer, and Related Products
FED-STD-313 Revision D:1996	MATERIAL SAFETY DATA, TRANSPORTATION DATA AND DISPOSAL DATA FOR HAZARDOUS MATERIALS FURNISHED TO GOVERNMENT ACTIVITIES
SAE AMS QQ A 250/12 : 2013	ALUMINUM ALLOY 7075, PLATE AND SHEET
SAE AMS S 8802 : 2015	SEALING COMPOUND, FUEL RESISTANT, INTEGRAL FUEL TANKS AND FUEL CELL CAVITIES
CFR 40 PART 63, VOL. 6 OF 6 : JUL 2017	PROTECTION OF ENVIRONMENT
MIL-PRF-81733 Revision D:1998	SEALING AND COATING COMPOUND, CORROSION INHIBITIVE
CFR 40 PART 63, VOL. 4 OF 6 : JUL 2017	PROTECTION OF ENVIRONMENT
SAE AMS 4911 : 2014	TITANIUM ALLOY, SHEET, STRIP, AND PLATE, 6AL - 4 V, ANNEALED
CFR 40 PART 63, VOL. 2 OF 6 : JUL 2017	PROTECTION OF ENVIRONMENT
CFR 40(PTS400-424) : JUL 2017	PROTECTION OF ENVIRONMENT - ENVIRONMENTAL PROTECTION AGENCY
SAE AMS QQ A 250/4 : 2015	ALUMINUM ALLOY 2024, PLATE AND SHEET
SAE AMS 6512 : 2012	STEEL, MARAGING, BARS, FORGINGS, TUBING, AND RINGS 18NI - 7.8CO - 4.9MO - 0.40TI - 0.10AL CONSUMABLE ELECTRODE VACUUM MELTED, ANNEALED
MIL-DTL-81381 Revision C:2005	WIRE, ELECTRIC, POLYIMIDE-INSULATED, COPPER OR COPPER ALLOY
MIL-PRF-23377 Revision K:2012	PRIMER COATINGS: EPOXY, HIGH-SOLIDS
CFR 40(PTS260-265) : JUL 2017	PROTECTION OF ENVIRONMENT - ENVIRONMENTAL PROTECTION AGENCY
SAE AMS 2759 : 2014	HEAT TREATMENT OF STEEL PARTS, GENERAL REQUIREMENTS
MIL-PRF-680 Revision C:2010	DEGREASING SOLVENT
ASTM F 22 : 2013 : REDLINE	Standard Test Method for Hydrophobic Surface Films by the Water-Break Test
CFR 40 PART 63, VOL. 5 OF 6 : JUL 2017	PROTECTION OF ENVIRONMENT
SAE AMS 5629H : 2016	STEEL, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, RINGS, AND EXTRUSIONS, 13CR - 8.0NI - 2.2MO - 1.1AL, VACUUM INDUCTION PLUS CONSUMABLE ELECTRODE MELTED, SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE
ASTM E 70	TEST METHOD FOR PH OF AQUEOUS SOLUTIONS WITH THE GLASS ELECTRODE
MIL-DTL-5541 Revision F:2006	Chemical Conversion Coatings on Aluminum and Aluminum Alloys
SAE AMS P 83310 : 2016	PLASTIC SHEET, POLYCARBONATE, TRANSPARENT
MIL-PRF-22750 Revision G:2011	COATING, EPOXY, HIGH-SOLIDS
A-A-58054 Base Document:1996	ABRASIVE MATS, NON-WOVEN, NON-METALLIC
SAE AMS 6359 : 2015	STEEL, SHEET, STRIP, AND PLATE 0.80CR - 1.8NI - 0.25MO (0.38 - 0.43C) (SAE 4340)
MIL-DTL-53039 Revision E:2013	COATING, ALIPHATIC POLYURETHANE, SINGLE COMPONENT, CHEMICAL AGENT RESISTANT
CFR 40(PTS50-51) : JUL 2017	PROTECTION OF ENVIRONMENT - ENVIRONMENTAL PROTECTION AGENCY
MIL-PRF-81322 Revision G:2005	GREASE, AIRCRAFT, GENERAL PURPOSE, WIDE TEMPERATURE RANGE, NATO CODE G-395
MIL-DTL-64159 Revision B:2011	CAMOUFLAGE COATING, WATER DISPERSIBLE ALIPHATIC POLYURETHANE, CHEMICAL AGENT RESISTANT
SAE AMS 4377 : 2011	MAGNESIUM ALLOY, SHEET AND PLATE, 3.0AL - 1.0ZN - 0.20MN (AZ31B-H24), COLD ROLLED, PARTIALLY ANNEALED
CFR 40 PART 63, VOL. 1 OF 6 : JUL 2017	PROTECTION OF ENVIRONMENT - ENVIRONMENTAL PROTECTION AGENCY
MIL A 8625 : F	ANODIC COATINGS FOR ALUMINUM AND ALUMINUM ALLOYS
SAE AMS 5046 : 2012	CARBON STEEL, SHEET, STRIP, AND PLATE, (SAE 1020 AND 1025)
SAE ARP 1755 : 2000	EFFECT OF CLEANING AGENTS ON AIRCRAFT ENGINE MATERIALS, STOCK LOSS TEST METHOD
SAE AMS S 8840 : 1999	STEEL SHEET AND STRIP, CORROSION-RESISTANT, PRECIPITATION HARDENING (AM350 AND AM355), PREMIUM QUALITY
SAE AMS 3204 : 2009	RUBBER SYNTHETIC, LOW-TEMPERATURE RESISTANT, 25 - 35
SAE AMS 2629 : 2017	FLUID, JET REFERENCE
MIL-PRF-83282 Revision D:1997	HYDRAULIC FLUID, FIRE RESISTANT, SYNTHETIC HYDROCARBON BASE, METRIC, NATO CODE NUMBER H-537
SAE AMS H 6875 : 2010	HEAT TREATMENT OF STEEL RAW MATERIALS
CFR 40 PART 63, VOL. 3 OF 6 : JUL 2017	PROTECTION OF ENVIRONMENT
MIL-PRF-85582 Revision E:2012	PRIMER COATINGS: EPOXY, WATERBORNE
FED-STD-141 Revision D:2001	PAINT, VARNISH, LACQUER AND RELATED MATERIALS, METHODS OF INSPECTION, SAMPLING AND TESTING
ASTM D 471 : 2016-02	TEST METHOD FOR RUBBER PROPERTY - EFFECT OF LIQUIDS
SAE AMS 3209 : 2014	CHLOROPRENE (CR) RUBBER, WEATHER RESISTANT, 65 - 75
ASTM D 3359 : 2017 : REDLINE	Standard Test Methods for Rating Adhesion by Tape Test
SAE AMS M 3171 : 1998	MAGNESIUM ALLOY, PROCESSES FOR PRETREATMENT AND PREVENTION OF CORROSION ON