|
SAE AMS 2419 : 2015
|
PLATING, CADMIUM-TITANIUM |
|
MIL-I-24092 Revision D:1993
|
INSULATING VARNISHES AND SOLVENTLESS RESINS FOR APPLICATION BY THE DIP PROCESS |
|
TT E 529 : G
|
ENAMEL, ALKYD, SEMIGLOSS, LOW VOC CONTENT |
|
TT V 51 : F
|
VARNISH, ASPHALT |
|
SAE AMS 2473 : 2013
|
CHEMICAL FILM TREATMENT FOR ALUMINUM ALLOYS, GENERAL PURPOSE COATING |
|
MIL S 11030 : F
|
SEALING COMPOUND, SINGLE-COMPONENT, NON-CURING, POLYSULFIDE BASE |
|
MIL M 45202 : C
|
MAGNESIUM ALLOY, ANODIC TREATMENT OF |
|
MIL C 16173 : E
|
CORROSION PREVENTIVE COMPOUND, SOLVENT CUTBACK, COLD APPLICATION |
|
MIL E 46096 : C
|
ENAMEL, LUSTRELESS, QUICK DRYING, STYRENATED ALKYD TYPE, SOLAR HEAT REFLECTING |
|
MIL-P-52192 Revision B:1971
|
PRIMER COATING, EPOXY |
|
SAE AMS 2412 : 2015
|
PLATING, SILVER, COPPER STRIKE, LOW BAKE |
|
SAE AMS 2424 : 2010
|
PLATING, NICKEL LOW-STRESSED DEPOSIT |
|
TT-W-572 Revision B:1969
|
WOOD PRESERVATIVE: WATER-REPELLANT |
|
MIL A 81801 : A
|
ANODIC COATINGS FOR ZINC AND ZINC ALLOYS |
|
SAE AMS 2404 : 2013
|
PLATING, ELECTROLESS NICKEL |
|
SAE AMS 2422 : 2014
|
PLATING, GOLD |
|
MIL P 14105 : D
|
PAINT, HEAT-RESISTING (FOR STEEL SURFACES) |
|
MIL C 81740 : 0
|
COATING, ALUMINUM AND ALUMINUM ALLOYS (METALLIC COMPOUND DECOMPOSITION) |
|
MIL-STD-1303 Revision B:1975
|
PAINTING OF NAVAL ORDNANCE EQUIPMENT |
|
TT S 300 : A
|
SHELLAC, CUT |
|
MIL L 3150 : C
|
LUBRICATING OIL, PRESERVATIVE MEDIUM |
|
MIL P 15931 : F
|
PAINT, ANTIFOULING, VINYL (FORMULAS NO. 121A, AND 129A) |
|
MIL C 87115 : A
|
COATING, IMMERSION ZINC FLAKE/CHROMATE DISPERSION |
|
MIL L 11195 : D
|
LACQUER, LUSTRELESS, HOT SPRAY |
|
SAE AMS 2475H : 2009
|
PROTECTIVE TREATMENTS, MAGNESIUM ALLOYS |
|
MIL P 21563 : B
|
POINT SYSTEM, FLUORESCENT, FOR AIRCRAFT APPLICATION (ASA) |
|
TT P 662 : B
|
PRIMER SURFACER, SANDING, LACQUER AND ENAMEL TYPE |
|
MIL-D-23003 Revision A:1980
|
|
|
MIL L 2638 : D
|
LACQUER, VINYL RESIN, GASOLINE AND WATER RESISTANT |
|
MIL C 17711 : B
|
COATINGS, CHROMATE, FOR ZINC ALLOY CASTINGS AND HOT-DIP GALVANIZED SURFACES |
|
TT E 522 : A
|
ENAMEL, PHENOLIC, OUTSIDE |
|
MIL C 83445 : A
|
COATING SYSTEM, POLYURETHANE, NON-YELLOWING WHITE, RAIN EROSION RESISTANT, THERMALLY REFLECTIVE |
|
SAE AMS 2402 : 2013
|
PLATING, ZINC |
|
TT C 494 : B
|
COATING COMPOUND, BITUMINOUS, SOLVENT TYPE, ACID RESISTANT |
|
MIL W 5044 : C
|
WALKWAY COMPOUND, NONSLIP AND WALKWAY MATTING, NONSLIP |
|
TT P 1757 : B
|
PRIMER COATING, ALKYD BASE, ONE COMPONENT |
|
TT L 54 : C
|
LACQUER, SPRAYING, ACID RESISTANT (FOR ALUMINUM SURFACES AROUND STORAGE BATTERIES) |
|
MIL S 4383 : C
|
SEALING COMPOUND, TOPCOAT, FUEL TANK, BUNA-N TYPE |
|
DOD P 23236 : B
|
PAINT COATING SYSTEMS, STEEL SHIP TANK, FUEL AND SALT WATER BALLAST (METRIC) |
|
SAE AMS 2407 : 2012
|
PLATING, CHROMIUM, POROUS |
|
MIL C 13924 : C
|
COATING, OXIDE, BLACK, FOR FERROUS METALS |
|
TT P 659 : C
|
PRIMER COATING & SURFACER SYNTHETIC, TINTS & WHITE, (FOR METAL & WOOD SURFACE) |
|
TT P 25 : F NOTICE 1
|
PRIMER COATING, EXTERIOR UNDERCOAT FOR WOOD, READY-MIXED, WHITE AND TINTS |
|
MIL P 18317 : 0
|
PLATING, BLACK NICKEL (ELECTRODEPOSITED) ON BRASS, BRONZE, OR STEEL |
|
MIL M 3171 : C
|
MAGNESIUM ALLOY PROCESSES FOR PRETREATMENT AND PREVENTION OF CORROSION |
|
TT-E-489 Revision J:1994
|
ENAMEL, ALKYD, GLOSS, (FOR EXTERIOR AND INTERIOR SURFACES) |
|
MIL C 83019 : 0
|
COATING, POLYURETHANE, FOR PROTECTION OF INTEGRAL FUEL TANK SEALING COMPOUND |
|
TT E 485 : F
|
ENAMEL, SEMI-GLOSS, RUST-INHIBITING |
|
MIL P 46093 : A
|
PRIMER COATING, SYNTHETIC (FOR BRAKE DRUMS) |
|
MIL C 22751 : D
|
COATING SYSTEM, EPOXY-POLYAMIDE, CHEMICAL AND SOLVENT RESISTANT, PROCESS FOR APPLICATION OF |
|
MIL STD 193 : L
|
PAINTING PROCEDURES AND MARKING FOR VEHICLES, CONSTRUCTION EQUIPMENT, MATERIAL HANDLING EQUIPMENT, AND SPARE PARTS |
|
SAE AMS 2425 : 2012
|
PLATING, GOLD FOR THERMAL CONTROL |
|
MIL C 23422 : D (2)
|
CHROMIUM PLATING, ELECTRODEPOSITED (ISSUE CONTROLLED REQUESTS BY OTHER THAN DOD) ACTYS MUST BE SUBMITTED VIA THE PREPARING ACTY OF THE SPEC) |
|
MIL P 45209 : B
|
PALLADIUM PLATING, (ELECTRODEPOSITED) |
|
MIL-R-7705 Revision B:1975
|
RADOME, GENERAL SPECIFICATION FOR |
|
SAE AMS2474 : 2013
|
CHEMICAL TREATMENT FOR ALUMINUM ALLOYS, LOW ELECTRICAL RESISTANCE COATING |
|
MIL C 83231 : A
|
COATING, POLYURETHANE, RAIN EROSION RESISTANT FOR EXTERIOR AIRCRAFT AND MISSILE PLASTIC PARTS |
|
ASTM B 456 : 2017 : REDLINE
|
Standard Specification for Electrodeposited Coatings of Copper Plus Nickel Plus Chromium and Nickel Plus Chromium |
|
MIL C 4556 : E
|
COATING KIT, EPOXY, FOR INTERIOR OF STEEL FUEL TANKS |
|
MIL C 81562 : B
|
COATING, CADMIUM, TIN CADMIUM AND ZINC (MECHANICALLY DEPOSITED) |
|
MIL-I-46058 Revision C:1972
|
INSULATING COMPOUND, ELECTRICAL (FOR COATING PRINTED CIRCUIT ASSEMBLIES) |
|
MIL C 27725 : B
|
COATING, CORROSION PREVENTIVE, FOR AIRCRAFT INTEGRAL FUEL TANKS |
|
MIL P 20689 : D
|
PLASTIC PLASTISOL (FOR COATING METALLIC OBJECTS) |
|
MIL C 450 : C
|
COATING COMPOUND, BITUMINOUS SOLVENT TYPE, BLACK (FOR AMMUNITION) |
|
MIL-S-8802 Revision F:1990
|
SEALING COMPOUND, TEMPERATURE-RESISTANT, INTEGRAL FUEL TANKS AND FUEL CELL CAVITIES, HIGH ADHESION |
|
MIL P 22332 : B
|
PAINT, PRIMING, EXTERIOR AND INTERIOR (FOR AMMUNITION) |
|
MIL P 15328 : LATEST
|
PRIMER PRETREATMENT FORMULA 117 FOR METALS |
|
ASTM B 545 : 2013 : REDLINE
|
Standard Specification for Electrodeposited Coatings of Tin |
|
MIL P 47184 : A
|
PLATING, NICKEL-TUNGSTEN, ELECTRODEPOSIT ON ALUMINUM ALLOYS, BY SELECTIVE (BRUSH) METHOD |
|
SAE AMS 2415 : 2012
|
PLATING, LEAD AND INDIUM |
|
DOD E 1115 : C
|
ENAMEL, INTERIOR, ALKYD, WHITE [FORMULA NO.30] METRIC |
|
MIL V 173 : C
|
VARNISH, MOISTURE AND FUNGUS RESISTANT (FOR TREATMENT OF COMMUNICATIONS, ELECTRONICS, AND ASSOCIATED EQUIPMENT) |
|
MIL F 18264 : D
|
FINISHES: ORGANIC, WEAPONS SYSTEM, APPLICATION AND CONTROL OF |
|
MIL L 81352 : A
|
LACQUER, ACRYLIC (FOR NAVAL WEAPONS SYSTEMS) |
|
TT-C-520 Revision B:1973
|
COATING COMPOUND BITUMINOUS SOLVENT TYPE UNDERBODY |
|
MIL E 46136 : A
|
ENAMEL, SEMI-GLOSS, ALKYD, SOLAR HEAT REFLECTING, OLIVE DRAB |
|
MIL S 5002 : D
|
SURFACE TREATMENTS AND INORGANIC COATINGS FOR METAL SURFACES OF WEAPONS SYSTEMS |
|
SAE AMS 2418 : 2017
|
PLATING, COPPER |
|
MIL L 19538 : C
|
LACQUER, ACRYLIC NITROCELLULOSE, CAMOUFLAGE (FOR AIRCRAFT USE) |
|
SAE AMS 2468 : 1999
|
HARD ANODIC COATING TREATMENT OF ALUMINUM ALLOYS |
|
MIL F 495 : E
|
FINISH CHEMICAL, BLACK FOR COPPER ALLOYS |
|
TT F 336 : E
|
FILLER, WOOD, PASTE |
|
SAE AMS 2426E : 2013
|
COATING, CADMIUM VACUUM DEPOSITION |
|
MIL P 23377 : G
|
PRIMER COATING, EPOXY, HIGH SOLIDS |
|
MIL L 52909 : NOTICE 1
|
LACQUER, ACRYLIC, CAMOUFLAGE, LUSTERLESS |
|
MIL P 15929 : C
|
PRIMER COATING, SHIPBOARD, VINYL-RED LEAD (FORMULA 119 - FOR HOT SPRAY) |
|
TT V 109 : C
|
VARNISH, INTERIOR, ALKYD RESIN |
|
MIL C 14538 : C
|
CHROMIUM PLATING, BLACK (ELECTRODEPOSITED) |
|
MIL N 55392 : A
|
NICKEL CARBON, POROUS, ELECTRODEPOSITED, FOR CAMOUFLAGE |
|
ASTM A 380 : 2006
|
Standard Practice for Cleaning, Descaling, and Passivation of Stainless Steel Parts, Equipment, and Systems |
|
MIL R 46085 : B
|
RHODIUM PLATING, ELECTRODEPOSITED |
|
MIL C 83466 : LATEST
|
|
|
MIL E 52835 : A
|
ENAMEL, MODIFIED ALKYD, CAMOUFLAGE, LUSTERLESS |
|
MIL P 21600 : A
|
PAINT SYSTEM, FLUORESCENT, REMOVABLE, FOR AIRCRAFT APPLICATION |
|
TT C 542 : E
|
COATING, POLYURETHANE, OIL-FREE, MOISTURE-CURING |
|
SAE AMS 2469 : 2014
|
HARD ANODIC COATING ON ALUMINUM AND ALUMINUM ALLOYS |
|
MIL T 12879 : A
|
TREATMENT, CHEMICAL, PREPAINT AND CORROSION INHIBITIVE, FOR ZINC SURFACES |
|
MIL E 46117 : A
|
|
|
MIL E 52798 : A
|
ENAMEL, ALKYD CAMOUFLAGE |
|
MIL C 20218 : P
|
CHROMIUM PLATING, ELECTRODEPOSITED, POROUS |
|
MIL P 24441 : B
|
PAINT, EPOXY POLYAMIDE, GENERAL SPECIFICATION FOR |
|
MIL P 38336 : A
|
PRIMER COATING, INORGANIC, ZINC DUST PIGMENTED, SELF-CURING, FOR STEEL SURFACES |
|
TT E 527 : D
|
ENAMEL, ALKYD, LUSTERLESS, LOW VOC CONTENT |
|
MIL L 14486 : A NOTICE 1
|
LACQUER, VINYL RESIN, SEMI-GLOSS |
|
MIL STD 870 : C
|
CADMIUM PLATING, LOW EMBRITTLEMENT, ELECTRODEPOSITION |
|
QQ C 320 : B
|
CHROMIUM PLATING (ELECTRODEPOSITED) |
|
TT E 490 : E
|
ENAMEL, SILICONE ALKYD COPOLYMER, SEMIGLOSS (FOR EXTERIOR & INTERIOR NON RESIDENTIAL USE) |
|
MIL T 10727 : C
|
TIN PLATING, ELECTRODEPOSITED OR HOT-DIPPED FOR FERROUS AND NONFERROUS METALS |
|
SAE AMS 2423 : 2015
|
PLATING, NICKEL, HARD DEPOSIT |
|
MIL C 46168 : D
|
COATING, ALIPHATIC POLYURETHANE, CHEMICAL AGENT RESISTANT |
|
MIL-C-81797 Revision A:1994
|
COATING, INORGANICALLY BONDED ALUMINUM (ELECTROPHORECTICALLY DEPOSITED) |
|
TT L 58 : E
|
LACQUER, SPRAYING, CLEAR AND PIGMENTED, (GENERAL INTERIOR USE) |
|
MIL-P-15930 Revision C:1981
|
PRIMER COATING, SHIPBOARD, VINYL-ZINC CHROMATE (FORMULA NO. 120 - FOR HOT SPRAY) |
|
MIL STD 808 : A
|
FINISH, MATERIALS AND PROCESSES FOR CORROSION PREVENTION AND CONTROL IN SUPPORT EQUIPMENT |
|
MIL C 5056 : 0
|
COATING, PERMANENT RESIN, PROCESS FOR APPLICATION OF TO AIRCRAFT PARTS |
|
QQ S 365 : D
|
SILVER PLATING, ELECTRODEPOSITED, GENERAL REQUIREMENTS FOR |
|
SAE AMS 2478 : 2012
|
ANODIC TREATMENT OF MAGNESIUM ALLOYS ACID TYPE, FULL COAT |
|
MIL R 3043 : B
|
RESIN COATING, UNPIGMENTED FOR ENGINE COMPONENTS AND METAL PARTS |
|
SAE AMS 2408K : 2013(R2019)
|
PLATING, TIN |
|
MIL C 27315 : A
|
COATING SYSTEMS, ELASTOMERIC, THERMALLY REFLECTIVE AND RAIN EROSION RESISTANT |
|
MIL C 7460 : A
|
CHROMIUM PLATING, POROUS CHANNEL TYPE, AIRCRAFT ENGINE CYLINDERS, GENERAL SPECIFICATIONS FOR |
|
SAE AMS 2479 : 2012
|
ANODIC TREATMENT OF MAGNESIUM ALLOYS ACID TYPE, THIN COAT |
|
MIL C 8514 : C
|
COATING, COMPOUND, METAL PRETREATMENT, RESIGN ACID [ASG] |
|
MIL C 22750 : F
|
COATING, EPOXY, VOC-COMPLIANT |
|
TT E 515 : A
|
ENAMEL, ALKYD, LUSTERLESS, QUICK-DRYING |
|
MIL G 45204 : C
|
GOLD PLATING, ELECTRODEPOSITED |
|
MIL L 46138 : 0
|
LACQUER, LUSTRELESS, ACRYLIC NITROCELLULOSE, SOLAR HEAT REFLECTING, OLIVE DRAB |
|
TT L 20 : A
|
LACQUER CAMOUFLAGE |
|
MIL C 46127 : A
|
COATING, GRAY, UNDERCOAT (SOLAR HEAT REFLECTING) |
|
MIL P 22636 : NOTICE 1
|
PRIMER COATING; FOR RED FUMING NITRIC ACID RESISTANT PAINT |
|
MIL-C-81751 Revision B:1972
|
COATING, METALLIC CERAMIC |
|
MIL F 14072 : D
|
FINISHES FOR GROUND BASED ELECTRONIC EQUIPMENT |
|
MIL T 704 : K
|
TREATMENT AND PAINTING OF MATERIAL |
|
SAE AMS 2401 : 2013
|
PLATING, CADMIUM, LOW HYDROGEN CONTENT DEPOSIT |
|
MIL-STD-865 Revision D:2007
|
SELECTIVE, BRUSH PLATING, ELECTRO-DESPOSITION |
|
MIL C 5541 : E
|
CHEMICAL CONVERSION COATINGS ON ALUMINUM AND ALUMINUM ALLOYS |
|
TT E 1593 : B
|
ENAMEL, SILICONE ALKYD COPOLYMER, GLOSS (FOR EXTERIOR AND INTERIOR USE) |
|
MIL A 8625 : F
|
ANODIC COATINGS FOR ALUMINUM AND ALUMINUM ALLOYS |
|
SAE AMS 2411 : 2013
|
PLATING, SILVER FOR HIGH TEMPERATURE APPLICATIONS |
|
SAE AMS 2406 : 2015
|
PLATING, CHROMIUM, HARD DEPOSIT |
|
MIL P 46856 : 0
|
PRIMER COATING EPOXY, PROCESS FOR APPLICATION OF |
|
MIL P 23408 : B
|
PLATING: TIN-CADMIUM (ELECTRODEPOSITED) |
|
MIL-STD-753 Revision C:1990
|
CORROSION RESISTANT STEEL PARTS, SAMPLING INSPECTION AND TESTING FOR SURFACE PASSIVATION |
|
SAE AMS 2472 : 2014
|
ANODIC TREATMENT OF ALUMINUM ALLOYS, SULFURIC ACID PROCESS, DYED COATING |
|
MIL E 480 : A
|
ENAMEL, BAKING, PHENOL-OR-UREA-FORMALDEHYDE |
|
MIL P 26915 : C
|
PRIMER COATING, ZINC DUST PIGMENTED, FOR STEEL SURFACES |
|
MIL T 16070 : B NOTICE 1
|
TREATMENT, MILDEW RESISTANT, FOR ROPE |
|
MIL-E-52891 Revision B:1988
|
ENAMEL, LUSTERLESS, ZINC PHOSPHATE, STYRENATED ALKYD TYPE |
|
MIL-STD-186 Revision F:2002
|
PROTECTIVE FINISHING SYSTEMS FOR ROCKETS, GUIDED MISSILES, SUPPORT EQUIPMENT AND RELATED MATERIALS |
|
MIL P 46847 : B
|
PLASTIC MATERIAL, FOAMED POLYURETHANE FOR ENCAPSULATING ELECTRONIC COMPONENTS |
|
TT-P-28 Revision H:2007
|
PAINT, ALUMINUM, HEAT RESISTING |
|
MIL L 46064 : A
|
LEAD TIN ALLOY COATING (ELECTRODEPOSITED) |
|
TT P 664 : D
|
PRIMER, COATING, ALKYD, CORROSION INHIBITING, LEAD AND CHROMATE FREE, VOC COMPLIANT |
|
MIL S 81733 : C
|
SEALING AND COATING COMPOUND CORROSION INHIBITIVE |
|
SAE AMS 2481K : 2015
|
Phosphate Treatment Antichafing |
|
MIL E 52929 : 0
|
ENAMEL, ALKYD, CAMOUFLAGE, FLASH DRY |
|
MIL C 3301 : C
|
COMPOUND, ASPHALTIC, HOT MELT [CAVITY LINING] |
|
TT P 636 : D
|
PRIMER COATING, ALKYD, WOOD AND FERROUS METAL |
|
SAE AMS 2400 : 2013
|
PLATING, CADMIUM |
|
TT L 32 : A
|
LACQUER, CELLULOSE NITRATE, GLOSS, FOR AIRCRAFT USE |
|
SAE AMS 2480 : 2013
|
PHOSPHATE TREATMENT PAINT BASE |
|
TT V 121 : H
|
VARNISH, SPAR, WATER RESISTING |
|
MIL P 50002 : B
|
PHOSPHATE COATING COMPOUNDS, FOR PHOSPHATING FERROUS METALS |
|
MIL-STD-1501 Revision F:2011
|
CHROMIUM PLATING, LOW EMBRITTLEMENT, ELECTRODEPOSITION |
|
SAE AMS 2403 : 2015
|
PLATING, NICKEL, GENERAL PURPOSE |
|
MIL L 19537 : C
|
LACQUER, ACRYLIC NITROCELLULOSE GLOSS (FOR AIRCRAFT USE) |
|
MIL C 14550 : B
|
COPPER PLATING (ELECTRODEPOSITED) |
|
MIL P 81728 : A
|
PLATING, TIN LEAD, (ELECTRODEPOSITED) |
|
MIL A 38267 : A
|
APPLICATION OF POLYURETHANE FUEL TANK COATINGS |
|
MIL V 12276 : D
|
VARNISH, PHENOLIC, BAKING |
|
SAE AMS 2476 : 2012
|
ELECTROLYTIC TREATMENT FOR MAGNESIUM ALLOYS, ALKALINE TYPE, FULL COAT |
|
MIL S 8784 : B
|
SEALING COMPOUND, LOW ADHESION, FOR REMOVABLE PANELS AND FUEL TANK INSPECTION PLATES |
|
CCC D 950 : F
|
DYEING AND AFTER TREATING PROCESSES FOR COTTON CLOTHS |
|
MIL W 13518 : C
|
WOOD PRESERVATIVE, TETRACHLOROPHENOL AND PENTACHLOROPHENOL, SURFACE SEALING COMPOUND |
|
MIL C 60539 : 66 NOTICE 1
|
COATING, ANODIC, CONVENTIONAL FOR ALUMINUM AND ALUMINUM ALLOY |
|
MIL S 46844 : C
|
SOLDER BATH SOLDERING OF PRINTED WIRING ASSEMBLIES |
|
MIL C 60536 : NOTICE 1
|
|
|
MIL T 12664 : B
|
TREATMENT, FUNGUS RESISTANT, PARANITROPHENOL, FOR CORK PRODUCTS |
|
SAE AMS 2410 : 2010
|
PLATING, SILVER, NICKEL STRIKE, HIGH BAKE |
|
MIL W 5050 : A
|
WALKWAY, COATING AND MATTING, NONSLIP, AIRCRAFT APPLICATION OF |
|
MIL P 27418 : 0
|
PLATING, SOFT NICKEL (ELECTRODEPOSITED, SULFAMATE BATH) |
|
MIL P 87112 : 0
|
PRIMER COATING, ELASTOMERIC, POLYSULFIDE, CORROSION INHIBITING |
|
MIL T 21330 : E
|
TREATMENT, INSECT RESISTANT, FOR PAPER |
|
MIL C 23217 : B
|
COATING, ALUMINUM, VACUUM DEPOSITED (ASG) |
|
TT-P-645 Revision C:2013
|
PAINT, ALKYD TYPE, FORMULA NUMBER 84 |
|
MIL C 26074 : E
|
COATINGS, ELECTROLESS NICKEL, REQUIREMENTS FOR |
|
MIL P 46105 : 0
|
PRIMER COATING: WELD-THROUGH, ZINC-RICH |
|
MIL P 14458 : A NOTICE 1
|
PAINT, RUBBER, RED FUMING NITRIC ACID RESISTANT |
|
MIL L 46159 : A
|
LACQUER, ACRYLIC, LOW REFLECTIVE, OLIVE DRAB |
|
QQ-P-416 Revision F:1991
|
PLATING, CADMIUM (ELECTRODEPOSITED) |
|
MIL C 83488 : C
|
COATING, ALUMINUM, ION VAPOR DEPOSITED |
|
MIL P 14553 : C
|
PRIMER COATING, DIPPING AUTOMOTIVE |
|
MIL-C-8837 Revision B:1983
|
COATING, CADMIUM (VACUUM DEPOSITED) |
|
MIL P 7962 : D
|
PRIMER COATING, CELLULOSE NITRATE MODIFIED ALKYD TYPE, CORROSION INHIBITING, FAST DRYING [FOR SPRAY APPLICATION OVER PRETREATMENT COATING |
|
SAE AMS 2405E: 2013
|
ELECTROLESS NICKEL PLATING, LOW PHOSPHORUS |
|
MIL L 46142 : 0
|
LACQUER, LUSTRELESS, SOLAR HEAT REFLECTING |
|
DOD P 16232 : F
|
PHOSPHATE COATING, HEAVY, MANGANESE OR ZINC BASE (FOR FERROUS METALS) |
|
MIL L 13762 : B
|
LEAD ALLOY COATING, HOT DIP (FOR IRON AND STEEL PARTS) |
|
QQ-T-425 Revision B:1976
|
TINPLATE, ELECTROLYTIC |
|
MIL P 11414 : E
|
PRIMER COATING, LACQUER, RUST INHIBITING |
|
SAE AMS 2471 : 2014
|
ANODIC TREATMENT OF ALUMINUM ALLOYS SULFURIC ACID PROCESS, UNDYED COATING |
|
MIL HDBK 132 : A
|
PROTECTIVE FINISHES FOR METAL AND WOOD SURFACES |
|
MIL C 83286 : B
|
COATING URETHANE, ALIPHATIC ISOCYANATE, FOR AEROSPACE APPLICATIONS |
|
SAE AMS 2414 : 2016
|
PLATING, LEAD |
|
MIL E 15090 : C
|
ENAMEL, EQUIPMENT, LIGHT GRAY (FORMULA NO. 111) |
|
MIL L 52043 : C
|
LACQUER, SEMI GLOSS, CELLULOSE NITRATE |
|
MIL L 13808 : B
|
LEAD PLATING (ELECTRODEPOSITED) |
|
MIL-STD-1503 Revision C:2007
|
PREPARATION OF ALUMINUM ALLOYS FOR SURFACE TREATMENT AND INORGANIC COATING |
|
TT-C-490 Revision F:2013
|
CHEMICAL CONVERSION COATINGS AND PRETREATMENTS FOR METALLIC SUBSTRATES (BASE FOR ORGANIC COATINGS) |
|
MIL STD 868 : B
|
NICKEL PLATING, LOW EMBRITTLEMENT, ELECTRO-DEPOSITION |
|
MIL L 3891 : B
|
LUMINESCENT MATERIAL AND EQUIPMENT [NONRADIOACTIVE] |
|
QQ N 290 : A
|
NICKEL PLATING (ELECTRODEPOSITED) |
|
VV-L-800 Revision C:1983
|
LUBRICATING OIL, GENERAL PURPOSE, PRESERVATIVE, (WATER-DISPLACING, LOW TEMPERATURE) |
|
MIL STD 194 : A NOTICE 2
|
SYSTEM FOR PAINTING AND FINISHING FIRE-CONTROL MATERIEL |
|
MIL-F-7179 Revision G:1993
|
FINISHES, COATINGS, AND SEALANTS FOR THE PROTECTION OF AEROSPACE WEAPONS SYSTEM |
|
TT V 119 : D
|
VARNISH, SPAR, PHENOLIC RESIN |
|
SAE AMS 2470 : 2013
|
ANODIC TREATMENT OF ALUMINUM ALLOYS, CHROMIC ACID PROCESS |
|
MIL S 11031 : B
|
SEALING COMPOUND, ADHESIVE. CURING (POLYSULFIDE BASE) |
|
MIL STD 171 : F
|
FINISHING OF METAL AND WOOD SURFACES |