NASA STD 5005(INT) : 2007

Name: NASA STD 5005(INT) : 2007
Brand: NASA

Superseded

View Superseded by

THE DESIGN AND FABRICATION OF GROUND SUPPORT EQUIPMENT

Superseded date

13-03-2009

Published date

01-01-2007

Publisher

National Aeronautics and Space Administration

DOCUMENT HISTORY LOG
FOREWORD
1. SCOPE
   1.1 Purpose
   1.2 Applicability
   1.3 Intended Use
2. APPLICABLE DOCUMENTS
   2.1 General
   2.2 Government Documents
   2.3 Non-Government Documents
   2.4 Order of Precedence
3. ACRONYMS AND DEFINITIONS
   3.1 Acronyms and Abbreviations
   3.2 Definitions
4. GENERAL REQUIREMENTS
   4.1 General
   4.2 Functional Designations
   4.3 Characteristics
   4.4 Documentation
   4.5 Logistics
   4.6 Personnel and Training
   4.7 Qualification
   4.8 Quality Assurance
   4.9 Packaging
5. DESIGN AND CONSTRUCTION REQUIREMENTS
   5.1 Structural Design
   5.2 Mechanical Design
   5.3 Electrical/Electronic Design
   5.4 Parts
   5.5 Electromagnetic Interference (EMI)
   5.6 Identification Markings and Labels
   5.7 Interchangeability
   5.8 Safety
   5.9 Human Factors
   5.10 Security
   5.11 Materials and Processes (M&P)
Appendix A - Sample Material Usage Agreement (KSC Form 21-475)
Appendix B - Deliverables
Appendix C - Reference Documents

Establishes top-level requirements and guidance for design and fabrication of ground support equipment (GSE) to assist NASA space flight programs/projects in providing robust, safe, reliable, maintainable, supportable, and cost-effective GSE.

DevelopmentNote	Supersedes NASA STD 5005B. Expiration Date: 07-20-2008. (08/2007)
DocumentType	Standard
PublisherName	National Aeronautics and Space Administration
Status	Superseded
SupersededBy	NASA STD 5005 : 2013

NASA STD 6001(INT) : 2009

FLAMMABILITY, OFFGASSING, AND COMPATIBILITY REQUIREMENTS AND TEST PROCEDURES

MIL-DTL-5015 Revision H:2000	CONNECTORS, ELECTRICAL, CIRCULAR THREADED, AN TYPE - GENERAL SPECIFICATION FOR
NASA STD 8719.9 : 2015	LIFTING STANDARD
SAE AS 8090 : 2016	MOBILITY, TOWED AEROSPACE GROUND EQUIPMENT, GENERAL REQUIREMENTS FOR
SAE AMS 2759/6 : 2005	GAS NITRIDING OF LOW-ALLOY STEEL PARTS
NASA STD 8739.5 : 2015	WORKMANSHIP STANDARD FOR FIBER OPTIC TERMINATIONS, CABLE ASSEMBLIES, AND INSTALLATION
ASNT SNT TC 1A : 2016	TOPICAL OUTLINES FOR QUALIFICATION OF NONDESTRUCTIVE TESTING PERSONNEL
MIL-STD-130 Revision N:2007	IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY
MIL-PRF-39012 Revision F:2014	CONNECTORS, COAXIAL, RADIO FREQUENCY, GENERAL SPECIFICATION FOR
SAE J 474 : 1985	ELECTROPLATING AND RELATED FINISHES
AISC 325 : 2017	STEEL CONSTRUCTION MANUAL
NASA STD 8739.1 : 2016	WORKMANSHIP STANDARD FOR POLYMERIC APPLICATION ON ELECTRONIC ASSEMBLIES
SAE AMS 2488 : 2000	ANODIC TREATMENT - TITANIUM AND TITANIUM ALLOYS SOLUTION PH 13 OR HIGHER
NASA STD 8739.3 : 1998	SOLDERED ELECTRICAL CONNECTIONS
SAE AMS 2175 : 2010	CASTINGS, CLASSIFICATION AND INSPECTION OF
NASA STD 6001 : 2011	FLAMMABILITY, OFFGASSING, AND COMPATIBILITY REQUIREMENTS AND TEST PROCEDURES
MIL-STD-810 Revision G:2008	ENVIRONMENTAL ENGINEERING CONSIDERATIONS AND LABORATORY TESTS
SAE AMS 2770 : 2015	HEAT TREATMENT OF WROUGHT ALUMINUM ALLOY PARTS
SAE AS 4787 : 2013	EDDY CURRENT INSPECTION OF CIRCULAR HOLES IN NONFERROUS METALLIC AIRCRAFT ENGINE HARDWARE
NASA STD 8739.2 : 1999	WORKMANSHIP STANDARD FOR SURFACE MOUNT TECHNOLOGY
SAE AMS 2647 : 2014	FLUORESCENT PENETRANT INSPECTION, AIRCRAFT AND ENGINE COMPONENT MAINTENANCE
MIL-HDBK-700 Revision A:1975	PLASTICS
AWS C3.5 : 1999	SPECIFICATION FOR INDUCTION BRAZING
NASA STD 4003 : 2013	ELECTRICAL BONDING FOR NASA LAUNCH VEHICLES, SPACECRAFT, PAYLOADS, AND FLIGHT EQUIPMENT
ASTM G 88 : 2013 : REDLINE	Standard Guide for Designing Systems for Oxygen Service
MIL-STD-1686 Revision C:1995	ELECTROSTATIC DISCHARGE CONTROL PROGRAM FOR PROTECTION OF ELECTRICAL AND ELECTRONIC PARTS, ASSEMBLIES AND EQUIPMENT (EXCLUDING ELECTRICALLY INITIATED EXPLOSIVE DEVICES)
MIL-DTL-22992 Revision H:2015	Connectors, Plugsand Receptacles, Electrical, Waterproof, Quick Disconnect, Heavy Duty Type, General Specification for
SAE AMS 2759/3 : 2015	HEAT TREATMENT PRECIPITATION-HARDENING CORROSION-RESISTANT, MARAGING, AND SECONDARY HARDENING STEEL PARTS
AWS C3.3 : 2008	RECOMMENDED PRACTICES FOR THE DESIGN, MANUFACTURE, AND EXAMINATION OF CRITICAL BRAZED COMPONENTS
NFPA 496 : 2017	PURGED AND PRESSURIZED ENCLOSURES FOR ELECTRICAL EQUIPMENT
ASTM A 380 : 2006	Standard Practice for Cleaning, Descaling, and Passivation of Stainless Steel Parts, Equipment, and Systems
MIL-HDBK-454 Revision B:2007	GENERAL GUIDELINES FOR ELECTRONIC EQUIPMENT
MIL-STD-889 Revision C:2016	DISSIMILAR METALS
IPC HDBK 001 : E	HANDBOOK AND GUIDE TO SUPPLEMENT J-STD-001
ISO 15389:2001	Space systems — Flight-to-ground umbilicals
AWS C3.2M/C3.2 : 2008	STANDARD METHOD FOR EVALUATING THE STRENGTH OF BRAZED JOINTS
IEEE/ASTM SI_10-2010	American National Standard for Metric Practice
AWS C3.4 : 1999	SPECIFICATION FOR TORCH BRAZING
ASTM D 5363 : 2016 : REDLINE	Standard Specification for Anaerobic Single-Component Adhesives (AN)
SAE AS 22759 : 2014	WIRE, ELECTRICAL, FLUOROPOLYMER-INSULATED, COPPER OR COPPER ALLOY
NASA STD 5008 : 2011	PROTECTIVE COATING OF CARBON STEEL, STAINLESS STEEL, AND ALUMINUM ON LAUNCH STRUCTURES, FACILITIES, AND GROUND SUPPORT EQUIPMENT
NASA STD 6008(INT) : 2006	NASA FASTENER MANAGEMENT AND CONTROL PRACTICES
SAE AMS 2759/7 : 2010	CARBURIZING AND HEAT TREATMENT OF CARBURIZING GRADE STEEL PARTS
SAE AMS 2759/2 : 2010	HEAT TREATMENT OF LOW-ALLOY STEEL PARTS MINIMUM TENSILE STRENGTH 220 KSI (1517 MPA) AND HIGHER
ESD S20.20 : 2014	PROTECTION OF ELECTRICAL AND ELECTRONIC PARTS, ASSEMBLIES AND EQUIPMENT (EXCLUDING ELECTRICALLY INITIATED EXPLOSIVE DEVICES)
SAE AMS 2772 : 2016	HEAT TREATMENT OF ALUMINUM ALLOY RAW MATERIALS
NASA STD 8739.4 : 2016	WORKMANSHIP STANDARD FOR CRIMPING, INTERCONNECTING CABLES, HARNESSES, AND WIRING
IPC 2221B:2012	GENERIC STANDARD ON PRINTED BOARD DESIGN
AWS D17.1 : 2001	SPECIFICATION FOR FUSION WELDING FOR AEROSPACE APPLICATIONS
MIL-DTL-38999 Revision M:2015	Connectors, Electrical, Circular, Miniature, High Density, Quick Disconnect (Bayonet, Threaded or Breech Coupling), Environment Resistant with Crimp Removable Contacts or Hermetically Sealed with Fixed, Solderable Contacts, General Specification for
SAE AMS 2759/8 : 2007	ION NITRIDING
SAE AMS 2759/1 : 2009	HEAT TREATMENT OF CARBON AND LOW-ALLOY STEEL PARTS, MINIMUM TENSILE STRENGTH BELOW 220 KSI (1517 MPA)
MIL-HDBK-263 Revision B:1994	ELECTROSTATIC DISCHARGE CONTROL HANDBOOK FOR PROTECTION OF ELECTRICAL & ELECTRONIC PARTS, ASSEMBLIES & EQUIPMENT
MIL-DTL-16878 Revision H:2012	WIRE, ELECTRICAL, INSULATED, GENERAL SPECIFICATION FOR
MIL-STD-461 Revision G:2015	REQUIREMENTS FOR THE CONTROL OF ELECTROMAGNETIC INTERFERENCE CHARACTERISTICS OF SUBSYSTEMS AND EQUIPMENT
SAE AS 50861 : 2011	WIRE, ELECTRIC, POLYVINYL CHLORIDE INSULATED, COPPER OR COPPER ALLOY
SAE AMS H 81200 : 2014	HEAT TREATMENT OF TITANIUM AND TITANIUM ALLOYS
NFPA 70 : 2017	NATIONAL ELECTRICAL CODE
CFR 29(PT1910.1000 TO END) : 0	LABOR - OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR
AWS C3.6 : 1999	SPECIFICATION FOR FURNACE BRAZING
SAE AMS 2759/9 : 2009	HYDROGEN EMBRITTLEMENT RELIEF (BAKING) OF STEEL PARTS
ASTM E 2375 : 2016 : REDLINE	Standard Practice for Ultrasonic Testing of Wrought Products
MIL-STD-1576 Base Document:1984	ELECTROEXPLOSIVE SUBSYSTEM SAFETY REQUIREMENTS AND TEST METHODS FOR SPACE SYSTEMS
ASTM E 1444 : 2005	Standard Practice for Magnetic Particle Testing
NASA HDBK 1001 : 0	TERRESTRIAL ENVIRONMENT (CLIMATIC) CRITERIA HANDBOOK FOR USE IN AEROSPACE VEHICLE DEVELOPMENT
SAE ARP 1247 : 2010	AIRCRAFT GROUND SUPPORT EQUIPMENT - GENERAL REQUIREMENTS
MMPDS 02 : 2005	METALLIC MATERIALS PROPERTIES DEVELOPMENT AND STANDARDIZATION (MMPDS)
SAE AMS 2759/11 : 2005	STRESS RELIEF OF STEEL PARTS
MIL-STD-1472 Revision G:2012	HUMAN ENGINEERING
ASTM D 7194 : 2012 : REDLINE	Standard Specification for Aerospace Parts Machined from Polychlorotrifluoroethylene (PCTFE)
MIL-HDBK-149 Revision B:1984	Rubber
SAE AMS 2774 : 2016	HEAT TREATMENT, WROUGHT NICKEL ALLOY AND COBALT ALLOY PARTS
AWS C3.7 : 1999	SPECIFICATION FOR ALUMINUM BRAZING
ASTM G 63 : 2015 : REDLINE	Standard Guide for Evaluating Nonmetallic Materials for Oxygen Service
CGA C 7 : 2014	GUIDE TO CLASSIFICATION AND LABELING OF COMPRESSED GASES
SAE AMS 2759/5 : 2004	HEAT TREATMENT, MARTENSITIC CORROSION-RESISTANT STEEL PARTS
NASA SPEC 5004 : 0	WELDING OF AEROSPACE GROUND SUPPORT EQUIPMENT AND RELATED NONCONVENTIONAL FACILITIES
AIAA R 100 : A 2001	RECOMMENDED PRACTICE FOR PARTS MANAGEMENT
MIL-HDBK-6870 Revision B:2012	NONDESTRUCTIVE INSPECTION PROGRAM REQUIREMENTS FOR AIRCRAFT AND MISSILE MATERIALS AND PARTS
SAE AMS 2759/4 : 2008	HEAT TREATMENT, AUSTENITIC CORROSION-RESISTANT STEEL PARTS
SAE AMS 2759/10 : 2014	AUTOMATED GASEOUS NITRIDING CONTROLLED BY NITRIDING POTENTIAL
MIL-HDBK-17-1 Revision F:2002	COMPOSITE MATERIALS HANDBOOK - VOLUME 1: POLYMER MATRIX COMPOSITES GUIDELINES FOR CHARACTERIZATION OF STRUCTURAL MATERIALS
FED-STD-595 Revision C:2008	COLORS USED IN GOVERNMENT PROCUREMENT
NASA STD 8739.8 : 2004	SOFTWARE ASSURANCE STANDARD
AIAA G 095 : 2004	GUIDE TO SAFETY OF HYDROGEN AND HYDROGEN SYSTEMS
CFR 49(PTS100-185) : 0	TRANSPORTATION
SAE ARP 4402 : 2013	EDDY CURRENT INSPECTION OF OPEN FASTENER HOLES IN ALUMINUM AIRCRAFT STRUCTURE
MIL-HDBK-695 Revision F:2017	RUBBER PRODUCTS: RECOMMENDED SHELF LIFE
ACI 318 PACK : 2008	BUILDING CODE REQUIREMENTS FOR STRUCTURAL CONCRETE (ACI 318-08) & PCA NOTES ON ACI 318-08