Name: NASA STD 6001 : 2011
Brand: NASA

FLAMMABILITY, OFFGASSING, AND COMPATIBILITY REQUIREMENTS AND TEST PROCEDURES

Published date

01-01-2011

Publisher

National Aeronautics and Space Administration

DOCUMENT HISTORY LOG
FOREWORD
1. SCOPE
2. APPLICABLE DOCUMENTS
3. ACRONYMS AND DEFINITIONS
4. EVALUATION AND TESTING OF MATERIALS
5. APPLICABLE MATERIAL TESTS
6. SYSTEM EVALUATIONS
7. TEST METHODS
APPENDIX
A - Supplemental Tests
B - Certification of Facilities
C - Reference Documents
D - Submitting Material for Testing
E - Requirements Compliance Matrix

Sets up National Aeronautics and Space Administration (NASA) program requirements for evaluation, testing, and selection of materials to preclude unsafe conditions related to flammability, offgassing, and fluid compatibility.

DevelopmentNote	Supersedes EIA 364-89. (09/2006) Supersedes NASA STD 6001(INT). (10/2011)
DocumentType	Standard
PublisherName	National Aeronautics and Space Administration
Status	Current
Supersedes	NASA STD 6001(INT) : 2009

BS EN 16602-70-21:2014	Space product assurance. Flammability testing for the screening of space materials
MIL-STD-1411 Revision B:2010	INSPECTION AND MAINTENANCE OF COMPRESSED GAS CYLINDERS
NASA SSTD 8070 0091 : 2014	SSC REQUIREMENTS FOR MATERIALS USED IN LOX/GOX SERVICE
ASTM E 1549/E1549M : 2013	Standard Specification for ESD Controlled Garments Required in Cleanrooms and Controlled Environments for Spacecraft for Non-Hazardous and Hazardous Operations
MIL-PRF-85045 Revision G:2014	Cables, Fiber Optic, General Specification for
MIL-DTL-197 Revision M:2016	PACKAGING OF BEARINGS, ASSOCIATED PARTS AND SUBASSEMBLIES
RR-C-901 Revision E:2010	CYLINDERS, COMPRESSED GAS: SEAMLESS SHATTERPROOF, HIGH PRESSURE DOT 3AA STEEL, AND 3AL ALUMINUM
ASTM E 2352 : 2019	Standard Practice for Aerospace Cleanrooms and Associated Controlled Environments—Cleanroom Operations
ASTM E 2352 : 2004	Standard Practice for Aerospace Cleanrooms and Associated Controlled Environments-Cleanroom Operations
NASA KSC NE 9187 : 2008	SENSORS, TRANSDUCERS AND SIGNAL CONDUCTING SYSTEMS SELECTION PROCESS
NASA MSFC PROC 3687 : 2015	MATERIAL SPECIFICATION FOR POLYURETHANE FOAM - SPRAYABLE
I.S. EN 14100:2002	SPACE PRODUCT ASSURANCE - THE DETERMINATION OF OFFGASSING PRODUCTS FROM MATERIALS AND ASSEMBLED ARTICLES TO BE USED IN A MANNED SPACE VEHICLE CREW COMPARTMENT
I.S. EN 14090:2002	SPACE PRODUCT ASSURANCE - FLAMMABILITY TESTING FOR THE SCREENING OF SPACE MATERIALS
MIL-DTL-2 Revision G:2006	VALVES, CYLINDER, GAS (FOR COMPRESSED OR LIQUEFIED GASES), GENERAL SPECIFICATION FOR
NASA KSC KTI 5210 : 2012	MATERIAL SELECTION LIST FOR OXYGEN SERVICE
I.S. EN 16602-70-29:2014	SPACE PRODUCT ASSURANCE - DETERMINATION OF OFFGASSING PRODUCTS FROM MATERIALS AND ASSEMBLED ARTICLES TO BE USED IN A MANNED SPACE VEHICLE CREW COMPARTMENT
ASTM E 1549/E1549M : 2013 : R2016	Standard Specification for ESD Controlled Garments Required in Cleanrooms and Controlled Environments for Spacecraft for Non-Hazardous and Hazardous Operations
ASTM E 2352 : 2004 : R2010	Standard Practice for Aerospace Cleanrooms and Associated Controlled Environments-Cleanroom Operations
NASA RPTSTD 8070 0001 : 2010 CHANGE 2 2013	SURFACE CLEANLINESS STANDARD OF FLUID SYSTEMS FOR ROCKET ENGINE TEST FACILITIES OF THE NASA ROCKET PROPULSION TEST PROGRAM
NASA KSC E 165 : 2009	ELECTRICAL GROUND SUPPORT EQUIPMENT FABRICATION, SPECIFICATION FOR
NASA SPEC 5004A : 2003	WELDING OF AEROSPACE GROUND SUPPORT EQUIPMENT AND RELATED NONCONVENTIONAL FACILITIES
NASA KSC C 123 : 2009	SURFACE CLEANLINESS OF GROUND SUPPORT EQUIPMENT FLUID SYSTEMS, SPECIFICATION FOR
NASA SSTD 8070 0126 : 2014	TUBING SYSTEMS FOR FACILITY SYSTEMS, SPECIAL TEST EQUIPMENT, AND AEROSPACE HARDWARE
NASA MSFC SPEC 164 : 2010	CLEANLINESS OF COMPONENTS FOR USE IN OXYGEN, FUEL, AND PNEUMATIC SYSTEMS, SPECIFICATION FOR
NASA STD 5008 : 2011	PROTECTIVE COATING OF CARBON STEEL, STAINLESS STEEL, AND ALUMINUM ON LAUNCH STRUCTURES, FACILITIES, AND GROUND SUPPORT EQUIPMENT
NASA STD 6016(INT) : 2006	STANDARD MATERIALS AND PROCESSES REQUIREMENTS FOR SPACECRAFT
NASA STD 5005 : 2013	STANDARD FOR THE DESIGN AND FABRICATION OF GROUND SUPPORT EQUIPMENT
NASA STD 5005(INT) : 2007	THE DESIGN AND FABRICATION OF GROUND SUPPORT EQUIPMENT
NASA KSC DE 512-SM : 2012	FACILITY SYSTEMS, GROUND SUPPORT SYSTEMS, AND GROUND SUPPORT EQUIPMENT GENERAL DESIGN REQUIREMENTS
NASA STD 6016 : 2016	STANDARD MATERIALS AND PROCESSES REQUIREMENTS FOR SPACECRAFT
NASA STD 8719.24 : 2011	NASA EXPENDABLE LAUNCH VEHICLE PAYLOAD SAFETY REQUIREMENTS
NASA MSFC STD 3012 : 2012	ELECTRICAL, ELECTRONIC, AND ELECTROMECHANICAL (EEE) PARTS MANAGEMENT AND CONTROL REQUIREMENTS FOR MSFC SPACE FLIGHT HARDWARE
NASA MSFC SPEC 3686 : A2015	MATERIAL SPECIFICATION FOR POLYURETHANE FOAM - SPRAYABLE
NASA PRC 5001 : 2011	PROCESS SPECIFICATION FOR CLEANING OF HARDWARE
NASA MSFC SPEC 494 : 2009	INSTALLATION OF HARNESS ASSEMBLIES (ELECTRICAL WIRING), SPACE VEHICLE, GENERAL SPECIFICATION FOR
MIL-DTL-83522 Revision E:2013	Connectors, Fiber Optic, Single Ferrule, General Specification for
NASA SSTD 8070 0006 : 2014	COMPONENT SERVICING PROCESSES AND DOCUMENTATION
NASA PRC 4005 : 2011	PROCESS SPECIFICATION FOR FLAME RETARDANT TREATMENT OF FABRICS AND WEBBINGS
I.S. EN 16602-70:2016	SPACE PRODUCT ASSURANCE - MATERIALS, MECHANICAL PARTS AND PROCESSES
ASTM D 7194 : 2012 : REDLINE	Standard Specification for Aerospace Parts Machined from Polychlorotrifluoroethylene (PCTFE)
NASA PRC 9010 : 2005	PROCESS SPECIFICATION FOR BAKING MATERIALS TO REDUCE TOXIC OFFGASSING
BS EN 14100:2001	Space product assurance. The determination of offgassing products from materials and assembled articles to be used in a manned space vehicle crew compartment
EN 14090:2002	Space product assurance - Flammability testing for the screening of space materials
EN 16602-70-21:2014	Space product assurance - Flammability testing for the screening of space materials
EN 14100:2001	Space product assurance - The determination of offgassing products from materials and assembled articles to be used in a manned space vehicle crew compartment
SAE AS 6294/1 : 2017	REQUIREMENTS FOR PLASTIC ENCAPSULATED MICROCIRCUITS IN SPACE APPLICATIONS
BS EN 16602-70:2016	Space product assurance. Materials, mechanical parts and processes
I.S. EN 16602-70-21:2014	SPACE PRODUCT ASSURANCE - FLAMMABILITY TESTING FOR THE SCREENING OF SPACE MATERIALS
BS EN 14090:2002	Space product assurance. Flammability testing for the screening of space materials
EN 16602-70:2016	Space product assurance - Materials, mechanical parts and processes
PREN 6095 : 200P1	AEROSPACE SERIES - ROTARY FASTENERS - STRUCTURAL AND NON-STRUCTURAL APPLICATIONS - TECHNICAL SPECIFICATION
ASME PVHO 1 : 2016	SAFETY STANDARD FOR PRESSURE VESSELS FOR HUMAN OCCUPANCY

SAE AS 4373 : 2012	TEST METHODS FOR INSULATED ELECTRIC WIRE
ISO/IEC 17025:2005	General requirements for the competence of testing and calibration laboratories
MIL-PRF-26539 Revision G:2017	PROPELLANTS, DINITROGEN TETROXIDE
ASTM D 3294 : 2015 : REDLINE	Standard Specification for Polytetrafluoroethylene (PTFE) Resin Molded Sheet and Molded Basic Shapes
MIL-STD-2223 Base Document:1992	TEST METHODS FOR INSULATED ELECTRIC WIRE
ASTM G 72 : 2001	Standard Test Method for Autogenous Ignition Temperature of Liquids and Solids in a High-Pressure Oxygen-Enriched Environment
ASTM E 502 : 2007	Standard Test Method for Selection and Use of ASTM Standards for the Determination of Flash Point of Chemicals by Closed Cup Methods
MIL-PRF-27404 Revision D:2012	PROPELLANT, MONOMETHYLHYDRAZINE
ASTM D 1310 : 2014 : REDLINE	Standard Test Method for Flash Point and Fire Point of Liquids by Tag Open-Cup Apparatus
MIL-PRF-26536 Revision G:2017	PROPELLANT, HYDRAZINE
MIL-PRF-25604 Revision F:2014	PROPELLANT, UNS-DIMETHYLHYDRAZINE
ISO 14624-1:2003	Space systems — Safety and compatibility of materials — Part 1: Determination of upward flammability of materials
NASA JSC 29353 : 2014	FLAMMABILITY CONFIGURATION ANALYSIS FOR SPACECRAFT APPLICATIONS
ISO 14624-3:2005	Space systems — Safety and compatibility of materials — Part 3: Determination of offgassed products from materials and assembled articles
NASA STD 5005 : 2013	STANDARD FOR THE DESIGN AND FABRICATION OF GROUND SUPPORT EQUIPMENT
ASTM G 86 : 1998 : REV A	Standard Test Method for Determining Ignition Sensitivity of Materials to Mechanical Impact in Ambient Liquid Oxygen and Pressurized Liquid and Gaseous Oxygen Environments
ISO 14624-4:2003	Space systems — Safety and compatibility of materials — Part 4: Determination of upward flammability of materials in pressurized gaseous oxygen or oxygen-enriched environments
MIL-PRF-27402 Revision D:2014	PROPELLANT, HYDRAZINE - UNS-DIMETHYLHYDRAZINE (50% N[2]H[4] - 50% UDMH)
ASTM D 240 : 2017 : REDLINE	Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter
ASTM G 74 : 2013 : REDLINE	Standard Test Method for Ignition Sensitivity of Nonmetallic Materials and Components by Gaseous Fluid Impact
NASA STD 6016 : 2016	STANDARD MATERIALS AND PROCESSES REQUIREMENTS FOR SPACECRAFT
ISO 14624-2:2003	Space systems — Safety and compatibility of materials — Part 2: Determination of flammability of electrical-wire insulation and accessory materials
ASTM E 1354 : 2017 : REDLINE	Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter