1 SCOPE
  1.1 Scope
  1.2 Classification
2 APPLICABLE DOCUMENTS
  2.1 General
  2.2 Government documents
  2.3 Non-Government publications
  2.4 Order of precedence
3 REQUIREMENTS
  3.1 Appendices
  3.2 Qualification
  3.3 Materials
  3.4 Chemical composition
  3.5 Mechanical properties
  3.6 Diffusible hydrogen
  3.7 Nondestructive evaluation
  3.8 Alloy identity
  3.9 Alloy testing
  3.10 In-Process Excavation
  3.11 Stability
  3.12 Rounding procedure
  3.13 Welding machine requirements
  3.14 Lot identification requirements
  3.15 Welding
  3.16 Instrumentation records
4 VERIFICATION
  4.1 Responsibility for inspection
  4.2 Classification of inspections
  4.3 Qualification inspection
  4.4 Quality conformance inspection
  4.5 Nondestructive testing
  4.6 Alloy identity
  4.7 Retests
  4.8 Chemical analysis
  4.9 Diffusible hydrogen control plan
  4.10 Certification of quality conformance
  4.11 Mix-up
  4.12 Welding heat input
5 PACKAGING
  5.1 Packaging
6 NOTES
  6.1 Intended use
  6.2 Acquisition requirements
  6.3 Qualification
  6.4 Definitions
  6.5 Packaging
  6.6 Inspection after delivery
  6.7 Subject term (key word) listing
APPENDIX A ELECTRODES - WELDING, FLUX-CORED, LOW-ALLOY STEEL
           A.1 SCOPE
           A.2 APPLICABLE DOCUMENTS
           A.3 REQUIREMENTS
           A.4 VERIFICATION
           A.5 PACKAGING
           A.6 NOTES
APPENDIX B ELECTRODES AND RODS - WELDING, BARE, SOLID, OR ALLOY
           CORED; AND FLUXES, LOW-ALLOY STEEL
           B.1 SCOPE
           B.2 APPLICABLE DOCUMENTS
           B.3 REQUIREMENTS
           B.4 VERIFICATION
           B.5 PACKAGING
           B.6 NOTES
APPENDIX C ELECTRODES, WELDING, MINERAL COVERED, IRON-POWDER,
           LOW-HYDROGEN MEDIUM, HIGH TENSILE AND HIGHER-STRENGTH
           LOW ALLOY STEELS
           C.1 SCOPE
           C.2 APPLICABLE DOCUMENTS
           C.3 REQUIREMENTS
           C.4 VERIFICATION
           C.5 PACKAGING
           C.6 NOTES