NEMA ICS 2:2008
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Hardcopy , PDF
31-07-2023
English
17-03-2008
Foreword
Introduction
Part 1 General requirements, manual and magnetic
controllers
1 General
2 Definitions
3 Classification
4 Characteristics and ratings
5 Product information, installation and maintenance
6 Service and storage conditions
7 Construction
8 Performance requirements and tests
9 Application
Part 2 AC noncombination magnetic motor controllers,
rated 600 volts
1 General
2 Definitions
3 Classification
4 Characteristics and ratings
5 Product information, installation and maintenance
6 Service and storage conditions
7 Construction
8 Performance requirements and tests
9 Application
Part 3 Nonmagnetic motor controllers
1 General
2 Definitions
3 Classification
4 Characteristics and ratings
5 Product information, installation and maintenance
6 Service and storage conditions
7 Construction
8 Performance requirements and tests
9 Application
Part 4 Overload relays
1 General
2 Definitions
3 Classification
4 Characteristics and ratings
5 Product information, installation and maintenance
6 Service and storage conditions
7 Construction
8 Performance requirements and tests
9 Application
Part 5 DC general-purpose constant-voltage controllers
1 General
2 Definitions
3 Classification
4 Characteristics and ratings
5 Product information, installation and maintenance
6 Service and storage conditions
7 Construction
8 Performance requirements and tests
9 Application
Part 6 AC combination motor controllers
1 General
2 Definitions
3 Classification
4 Characteristics and ratings
5 Product information, installation and maintenance
6 Service and storage conditions
7 Construction
8 Performance requirements and tests
9 Application
Part 7 Magnetic lighting contactors
1 General
2 Definitions
3 Classification
4 Characteristics and ratings
5 Product information, installation and maintenance
6 Service and storage conditions
7 Construction
8 Performance requirements and tests
9 Application
Annex A Maintenance of motor controllers after a fault
condition
Supplement I Scope of the industrial control and
systems section
Provides general requirements for manual and magnetic controllers. Covers requirements for magnetic and non-magnetic motor controllers, overload relays and magnetic lighting contactors. Errata issued March 2008.
| DevelopmentNote |
Supersedes & incorporates NEMA ICS 2-8. (05/2015)
|
| DocumentType |
Standard
|
| Pages |
3
|
| PublisherName |
National Electrical Manufacturers Association
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| MIL-B-44037 Revision A:1986 | BLENDER, POWERED MIX, MECHANICALLY REFRIGERATED |
| MIL-B-17452 Revision E:1990 | BOILERS, STEAM AND HOT WATER, FIRETUBE - SCOTCH PACKAGED TYPE (320,001 TO 35,000,000 BTU/HR THERMAL OUTPUT CAPACITY) |
| MIL-B-18897 Revision F:1990 | BOILERS, STEAM AND HOT WATER, WATERTUBE (STRAIGHT BARE AND FINNED TUBE), CAST IRON AND FIREBOX, PACKAGED TYPE (40,000 TO 35,000 BTU/HR THERMAL OUTPUT CAPACITY) |
| IEEE 241 : 1990 | ELECTRIC POWER SYSTEMS IN COMMERCIAL BUILDINGS |
| ASME B30.29 : 2012 | SELF-ERECTING TOWER CRANES - SAFETY STANDARD FOR CABLEWAYS, CRANES, DERRICKS, HOISTS, HOOKS, JACKS, AND SLINGS |
| IEEE C37.121-2012 | GUIDE FOR SWITCHGEAR - UNIT SUBSTATION - REQUIREMENTS |
| MIL-M-24738 Base Document:1990 | MONITORS, HIGH TEMPERATURE MOTOR PROTECTION |
| UFC 3-520-01 : 2015 | UNIFIED FACILITIES CRITERIA - INTERIOR ELECTRICAL SYSTEMS |
| F-B-2903 Base Document:1998 | BOILERS, STEAM AND HOT WATER, FIRETUBE, SCOTCH PACKAGED TYPE (320,001 TO 35,000,000 BTU/HR THERMAL OUTPUT CAPACITY) |
| IEEE DRAFT 741 : D1 2006 | CRITERIA FOR THE PROTECTION OF CLASS 1E POWER SYSTEMS AND EQUIPMENT IN NUCLEAR POWER GENERATING STATIONS |
| MIL-B-18796 Revision F:1984 | BURNERS, SINGLE: OIL, GAS, AND GAS-OIL COMBINATION FOR PACKAGED BOILERS (320,001 TO 125,000,000 BTU/HR THERMAL OUTPUT CAPACITY) |
| MIL-G-19826 Revision F:1984 | GENERATOR SET, DIESEL ENGINE, ALTERNATING CURRENT FOR FACILITIES CONSTRUCTION, 1O KW THRU 500 KW (NOT STOCKED) |
| IEEE 141 : 1993 | IEEE Recommended Practice for Electric Power Distribution for Industrial Plants |
| OO-L-2880 Base Document:1997 | LAUNDRY UNIT, SKID-MOUNTED, 100 POUNDS (DRY WEIGHT) PER HOUR |
| F-P-2908 Base Document:1997 | PUMPING UNIT, CONDENSATE, RETURN, AND BOILER FEED PACKAGE |
| IEEE 242-2001 | IEEE Recommended Practice for Protection and Coordination of Industrial and Commercial Power Systems (IEEE Buff Book) |
| MIL-C-3925 Revision H:1989 | COMPRESSOR, RECIPROCATING AND ROTARY POWER DRIVEN, AIR [PAINT SPRAY TYPE] |
| ASME BTH 1 : 2017 | DESIGN OF BELOW-THE-HOOK LIFTING DEVICES |
| ASHRAE HDBK REFRIGERATION : 2014 | ASHRAE HANDBOOK - REFRIGERATION |
| MIL-B-29205 Revision A:1990 | BOILERS, FLUIDIZED BED, STEAM AND HOT WATER, PACKAGED TYPE (330 TO 51,500 POUNDS PER HOUR THERMAL OUTPUT CAPACITY) |
| MIL-B-28685 Base Document:1990 | BAGHOUSE, REVERSE PULSE JET; FOR PACKAGED BOILEK3 FIRED ON COAL OR A COMBINATION OF COAL AND GAS, COAL AND OIL, OR COAL-GAS-OIL (2,000,000 TO 125,000,000 BTU/HR THERMAL OUTPUT CAPACITY) |
| IEEE C37.59-2007 | IEEE Standard Requirements for Conversion of Power Switchgear Equipment |
| IEEE 741-2007 | IEEE Standard Criteria for the Protection of Class 1E Power Systems and Equipment in Nuclear Power Generating Stations |
| MIL-DTL-2212 Revision K:2014 | CONTACTORS AND CONTROLLERS, ELECTRIC MOTOR AC OR DC, AND ASSOCIATED SWITCHING DEVICES |
| F-B-2902 Base Document:1990 | BOILERS, STEAM WATERTUBE (BENT TUBE, MULTI-DRUM AND CROSS DRUM) PACKAGED TYPE (10,000,000 TO 125,000,000 BTU/HR THERMAL OUTPUT CAPACITY) |
| OO-P-2895 Base Document:1997 | PLANT, AGGREGATE, SECONDARY, WITH CONE CRUSHER, MOBILE, 75 TON PER HOUR CAPACITY |
| ANSI E1.42 : 2016 | ENTERTAINMENT TECHNOLOGY - DESIGN, INSTALLATION, AND USE OF ORCHESTRA PIT LIFTS |
| MIL-B-17095 Revision H:1990 | BOILERS, STEAM, WATERTUBE (BENT TUBE, MULTI-DRUM AND CROSS DRUM) PACKAGED TYPE (10,000,000 TO 125,000,000 BTU/HR THERMAL OUTPUT CAPACITY) |
| MIL M 29212 : B NOTICE 1 | MIXING PLANT, ASPHALT, DRUM TYPE, PORTABLE, ELECTRIC MOTOR DRIVEN, 120 TONS PER HOUR CAPACITY |
| NFPA 79 : 2018 | ELECTRICAL STANDARD FOR INDUSTRIAL MACHINERY |
| F-B-2910 Base Document:1998 | BURNERS, SINGLE: OIL, GAS, AND GAS-OIL COMBINATION FOR PACKAGED BOILERS (320,001 TO 125, 000,000 BTU/HR THERMAL OUTPUT CAPACITY) |
| MIL-B-43928 Revision A:1987 | BROILER, CONVEYORIZED, INFRARED, ELECTRIC |
| WW-F-2743 Revision A:1998 | FURNACES, WARM AIR & HEATERS, UNIT, FORCED AIR CIRCULATION, OIL & GAS FIRED |
| CC-G-2745 Base Document:1984 | GENERATOR SETS, DIESEL ENGINE, ALTERNATING CURRENT, FOR FACILITIES CONSTRUCTION; 10 KW THROUGH 1000 KW (NOT STOCKED) |
| XX-C-2816 Revision A:2016 | COMPRESSOR, AIR, RECIPROCATING OR ROTARY, ELECTRIC MOTOR DRIVEN, STATIONARY, 10 HP AND LARGER |
| CSA C22.2 No. 282 : 2013 | PLUGS, RECEPTACLES, AND COUPLERS FOR ELECTRIC VEHICLES |
| NEMA ICS 20:2009 (R2015) | Informational Guide to Electrical Industrial Topics |
| UFC 3-430-11 : 2001 | UNIFIED FACILITIES CRITERIA - BOILER CONTROL SYSTEMS |
| NEMA KS 1:2013 | Heavy Duty Enclosed and Dead-Front Switches (600 Volts Maximum) |
| NEMA ICS8 : 2011 | APPLICATION GUIDE FOR INDUSTRIAL CONTROL AND SYSTEMS CRANE AND HOIST CONTROLLERS |
| NEMA ICS 18:2001 (R2007) | INDUSTRIAL CONTROL AND SYSTEMS: MOTOR CONTROL CENTERS |
| IEEE 421.3-1997 | IEEE Standard for High-Potential Test Requirements for Excitation Systems for Synchronous Machines |
| NEMA ICS 2.4 : 2003(R2012) | INDUSTRIAL CONTROL AND SYSTEMS: NEMA AND IEC DEVICES FOR MOTOR SERVICE - A GUIDE FOR UNDERSTANDING THE DIFFERENCES |
| NEMA ICS 3:2005 (R2010) | INDUSTRIAL CONTROL AND SYSTEMS: MEDIUM VOLTAGE CONTROLLERS RATED 2001 TO 7200 VOLTS AC |
| NEMA ICS 3.1 : 2009(R2014) | GUIDE FOR THE APPLICATION, HANDLING, STORAGE, INSTALLATION, AND MAINTENANCE OF MEDIUM-VOLTAGE AC CONTACTORS, CONTROLLERS, AND CONTROL CENTERS |
| IEEE C37.13.1-2006 | IEEE Standard for Definite Purpose Switching Devices for Use in Metal-Enclosed Low-Voltage Power Circuit Breaker Switchgear |
| IEEE C62.23-1995 | IEEE Application Guide for Surge Protection of Electric Generating Plants |
| NEMA ICS 6-1993 (R2006) | Industrial Control and Systems: Enclosures |
| NEMA ICS 1.3:1986 (R2001, R2009, R2015) | Preventive Maintenance of Industrial Control and Systems Equipment |
| NEMA ICS 9 : 1993 | INDUSTRIAL CONTROL AND SYSTEMS: POWER CIRCUIT ACCESSORIES |
| UFC 3-535-01 : Change 1 | UNIFIED FACILITIES CRITERIA - VISUAL AIR NAVIGATION FACILITIES |
| IEEE C37.96-2012 | IEEE Guide for AC Motor Protection |
| NEMA BU 2 : 1996 | MAJOR REQUIREMENTS RELATED TO THE APPLICATION AND TESTING OF LOW VOLTAGE BUSWAY |
| NEMA ICS 7.1:2014 | Safety Standards for Construction and Guide for Selection, Installation and Operation of Adjustable Speed Drive Systems |
| IEEE 3001.5-2013 | IEEE Recommended Practice for the Application of Power Distribution Apparatus in Industrial and Commercial Power Systems |
| IEEE 3004.8-2016 | IEEE Recommended Practice for Motor Protection in Industrial and Commercial Power Systems |
| IEEE 1290-2015 REDLINE | IEEE Guide for Motor-Operated Valve (MOV) Motor Application, Protection, Control, and Testing in Nuclear Power-Generating Stations |
| IEEE 3001.11-2017 | IEEE Recommended Practice for Application of Controllers and Automation to Industrial and Commercial Power Systems |
| IEEE C37.121-2012 REDLINE | IEEE Guide for Switchgear - Unit Substation - Requirements |
| IEEE 1683-2014 | IEEE Guide for Motor Control Centers Rated up to and including 600 V AC or 1000 V DC with Recommendations Intended to Help Reduce Electrical Hazards |
| NEMA ICS 7 : 2014 | INDUSTRIAL CONTROL AND SYSTEMS: ADJUSTABLE - SPEED DRIVES |
| NEMA MG 1 : 2016 | MOTORS AND GENERATORS |
| NEMA MG 2:2014 | Safety Standard for Construction and Guide for Selection, Installation and Use of Electric Motors and Generators |
| NEMA ICS 1.3:1986 (R2001, R2009, R2015) | Preventive Maintenance of Industrial Control and Systems Equipment |
| CFR 29(PTS1900-1910) : 0 | LABOR - OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR |
| NEMA ICS 1.1-1984 (R1988, R1993, R1998, R2003, R2009, R2015) | Safety Guidelines for the Application, Installation and Maintenance of Solid State Control |
| NEMA ICS 7.1:2014 | Safety Standards for Construction and Guide for Selection, Installation and Operation of Adjustable Speed Drive Systems |
| NEMA ICS 10.2 : 2005 | INDUSTRIAL CONTROL AND SYSTEMS - PART 2: STATIC AC TRANSFER EQUIPMENT |
| NEMA ICS 6-1993 (R2006) | Industrial Control and Systems: Enclosures |
| NEMA ICS 3:2005 (R2010) | INDUSTRIAL CONTROL AND SYSTEMS: MEDIUM VOLTAGE CONTROLLERS RATED 2001 TO 7200 VOLTS AC |
| NEMA ICS 2.1 : 1990 | |
| NEMA ICS 3.1 : 2009(R2014) | GUIDE FOR THE APPLICATION, HANDLING, STORAGE, INSTALLATION, AND MAINTENANCE OF MEDIUM-VOLTAGE AC CONTACTORS, CONTROLLERS, AND CONTROL CENTERS |
| NEMA KS 1:2013 | Heavy Duty Enclosed and Dead-Front Switches (600 Volts Maximum) |
| NEMA ICS 5:2017 | Control Circuit and Pilot Devices |
| NEMA ICS 9 : 1993 | INDUSTRIAL CONTROL AND SYSTEMS: POWER CIRCUIT ACCESSORIES |
| IEC 60947-1:2007+AMD1:2010+AMD2:2014 CSV | Low-voltage switchgear and controlgear - Part 1: General rules |
| NFPA 70 : 2017 | NATIONAL ELECTRICAL CODE |
| ANSI/NEMA AB 3:2013 | Molded-Case Circuit Breakers and Their Application |
| NEMA ICS 2.2 : 83(R1988) | MAINTENANCE OF MOTOR CONTROLLERS AFTER A FAULT CONDITION |
| NEMA ICS 2.4 : 2003(R2012) | INDUSTRIAL CONTROL AND SYSTEMS: NEMA AND IEC DEVICES FOR MOTOR SERVICE - A GUIDE FOR UNDERSTANDING THE DIFFERENCES |
| NEMA ICS 1 : 2000(R2015) | INDUSTRIAL CONTROL AND SYSTEMS: GENERAL REQUIREMENTS |
| NEMA ICS8 : 2011 | APPLICATION GUIDE FOR INDUSTRIAL CONTROL AND SYSTEMS CRANE AND HOIST CONTROLLERS |
| NEMA ICS 4:2015 | Application Guideline for Terminal Blocks |
| NEMA ICS 10.1 : 2005 | INDUSTRIAL CONTROL AND SYSTEMS - PART 1: ELECTROMECHANICAL AC TRANSFER SWITCH EQUIPMENT |
| NEMA ICS 2.3 : 1995(R2008) | INDUSTRIAL CONTROL AND SYSTEMS: INSTRUCTIONS FOR THE HANDLING, INSTALLATION, OPERATION AND MAINTENANCE OF MOTOR CONTROL CENTERS |
| NEMA AB 1 | Molded-Case Circuit Breakers, Molded Case Switches, and Circuit-Breaker Enclosures |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.