NF EN 10025 : 1993

Superseded

PRODUITS LAMINES A CHAUD EN ACIERS DE CONSTRUCTION NON ALLIES - CONDITIONS TECHNIQUES DE LIVRAISON

Superseded date

01-03-2005

Published date

12-01-2013

Publisher

Association Francaise de Normalisation

Cooperating organizations
National foreword
Foreword
1 Scope
2 Normative references
2.1 General standards
2.2 Standards on dimensions and tolerances
2.3 Standards on testing
3 Definitions
4 Information to be supplied by the purchaser
4.1 General
4.2 Options
5 Dimensions, mass and tolerances
5.1 Dimensions and tolerances
5.2 Mass of steel
6 Classification of grades and qualities;
      designation
6.1 Classification of grades and qualities
6.2 Designation
7 Technical requirements
7.1 Steel manufacturing process
7.2 Delivery conditions
7.3 Chemical composition
7.4 Mechanical properties
7.5 Technological properties
7.6 Surface finish
8 Inspection and testing
8.1 General
8.2 Specific inspection and testing
8.3 Sampling
8.4 Test units
8.5 Verification of chemical composition
8.6 Mechanical tests
8.7 Test methods
8.8 Retests and resubmission for testing
8.9 Internal defects
8.10 Inspection documents
9 Marking of flat and long products
10 Complaints after delivery
11 Options
11.1 All products
11.2 Flat products
11.3 Long products
11.4 Semi-finished products
Annex A (normative) Location of samples and test pieces
         (see EURONORM 18)
Annex B (informative) List of national standards which
         correspond with EURONORMS referenced
Annex C (informative) List of corresponding former
         national designations
National annex NA (normative) Non-conflicting national
                  additions
National annex NB (informative) Applicable standards
National annex NC (informative) Committees responsible
National annex ND (informative) Cross-references

Lays down requirements for long products and flat products of hot rolled non-alloy, base and quality steels. Intended for use in welded, bolted and riveted structures, for service at ambient temperatures. Not intended to be heat treated except products delivered in the delivery condition N. Stress relief annealing if permitted. Products delivered in N condition may be normalized and hot formed after delivery. Does not apply to coated products. Covers definitions, information to be supplied by the purchaser, dimensions, mass and tolerances, classification of qualities, designation, technical requirements, inspection and testing, marking for flat and long products, complaints after delivery and options.

DocumentType	Standard
PublisherName	Association Francaise de Normalisation
Status	Superseded
Supersedes	NFA 35 501 : 1987

Standards	Relationship
UNE-EN 10025:1994	Identical
BS EN 10025:1993	Identical
EN 10025:1990/A1:1993	Identical
UNI EN 10025 : 1995	Identical
DIN EN 10025:1994-03	Identical
I.S. EN 10025:1994	Identical

XP P98 541 : 2005 XP	TEMPORARY ROAD TRAFFIC SIGNS - TRAFFIC SIGNS AND SUPPORTS - MAIN DIMENSIONS AND TOLERANCES
XP ENV 13381-4 : 2002 XP	TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 4: APPLIED PROTECTION TO STEEL MEMBERS
NF ENV 1993-5 : 2002 FD	EUROCODE 3: DESIGN OF STEEL STRUCTURES - PART 5: PILING
NF EN 12285-1 : 2003	WORKSHOP FABRICATED TANKS - PART 1: HORIZONTAL CYLINDRICAL SINGLE SKIN AND DOUBLE SKIN TANKS FOR THE UNDERGROUND STORAGE OF FLAMMABLE AND NON-FLAMMABLE WATER POLLUTING LIQUIDS
XP P98 531 : 99 XP	PERMANENT ROAD TRAFFIC SIGNS - PRINCIPAL DIMENSIONS OF TRAFFIC SIGNS AND SUPPORTS - VALUES AND DIMENSIONAL TOLERANCES
NF EN 1993 1-10 : 2005	EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-10: MATERIAL TOUGHNESS AND THROUGH-THICKNESS PROPERTIES
NFP 34 205 : 1997	BUILDING WORKS - ROOFING WITH PROFILED SHEETING MADE OF COATED STEEL SHEET - PART 1: TECHNICAL CLAUSES - PART 2: SPECIAL CLAUSES
NFA 36 715 : 2003	UNPACKAGED STEELS - LONG STEEL PRODUCTS INTENDED FOR CONTACT WITH FOODSTUFFS, PRODUCTS AND BEVERAGES FOR HUMAN AND ANIMAL CONSUMPTION - UNCOATED, NON STAINLESS, UNALLOYED AND ALLOYED STEELS
NF ENV 1998 1-3 : 2003 XP	EUROCODE 8 - DESIGN PROVISIONS FOR EARTHQUAKE RESISTANCE OF STRUCTURES AND NATIONAL APPLICATION DOCUMENT - PART 1-3: GENERAL RULES - SPECIFIC RULES FOR VARIOUS MATERIALS AND ELEMENTS
NFP 93 354 : 2011	BUILDING SITE EQUIPMENT - BRACKET SCAFFOLDING - PRODUCT SPECIFICATION - TEST METHOD
NFP 93 523 : 2002	BUILDING SITE EQUIPMENT - TEMPORARY METALLIC STAIRWAYS INTENDED FOR PUBLIC USE
NF EN 50216-10 : 2009	POWER TRANSFORMER AND REACTOR FITTINGS - PART 10: OIL-TO-AIR HEAT EXCHANGERS
NFP 22 501-1 : 98 XP	EXECUTION OF STEEL STRUCTURES - PART 1: GENERAL RULES AND RULES FOR BUILDINGS
NFP 22 311 : 92 AMD 2 2002 XP	STEEL CONSTRUCTION - EUROCODE 3: "DESIGN OF STEEL STRUCTURES" AND NATIONAL APPLICATION DOCUMENT - PART 1-1: GENERAL RULES AND RULES FOR BUILDINGS
NFE 52 140 : 2006	FORGED SHACKLES FOR GENERAL LIFTING PURPOSES - DEE SHACKLES AND BOW SHACKLES - GRADES 4 AND 8
XP P98 421 : 2006 XP	ROAD SAFETY BARRIERS - BN4 SAFETY BARRIERS - COMPOSITION, OPERATION, HOLDING PERFORMANCES, INSTALLATION AND MOUNTING CONDITIONS, COMPONENTS
XP ENV 13381-2 : 2002 XP	TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 2: VERTICAL PROTECTIVE MEMBRANES
NF EN 13155 : 2003 + A2 2009	CRANES - SAFETY - NON-FIXED LOAD LIFTING ATTACHMENTS
NF ENV 1993-2 : 2000 XP	EUROCODE 3: DESIGN OF STEEL STRUCTURES AND NATIONAL APPLICATION DOCUMENT - PART 2: STEEL BRIDGES
NFP 98 550 : 96 XP	VERTICAL ROAD TRAFFIC SIGNS - GANTRIES, CANTILEVERS AND HIGH MASTS - CALCULATION SPECIFICATIONS, INSTALLATION AND CONTROL
NF EN 1993-3-2 : 2007	EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 3-2: TOWERS, MASTS AND CHIMNEYS - CHIMNEYS
NFP 22 101-2/CN : 2009	EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES - NATIONAL ADDITION TO NF EN 1090-2:2009
XP P98 540 : 2005 XP	TEMPORARY ROAD TRAFFIC SIGNS - TRAFFIC SIGNS AND SUPPORTS - PERFORMANCE, TECHNICAL CHARACTERISTICS AND SPECIFICATIONS
NF CEN/TS 13001-3-1 : 2005 XP	CRANES - GENERAL DESIGN - PART 3-1: LIMIT STATES AND PROOF OF COMPETENCE OF STEEL STRUCTURES
XP P98 424 : 98 XP	ROAD SAFETY BARRIERS - BN5 SAFETY BARRIERS - COMPOSITION, OPERATION, HOLDING PERFORMANCES, INSTALLATION AND MOUNTING CONDITIONS, COMPONENTS
FD CR 10313 : 2000 FD	CLASSIFICATION OF GRADES OF STEEL - EXAMPLES OF CLASSIFICATION RELATED TO EUROPEAN STANDARDS
XP P98 530 : 99 XP	PERMANENT ROAD TRAFFIC SIGNS - TRAFFIC SIGNS AND SUPPORTS - TECHNICAL CHARACTERISTICS AND SPECIFICATIONS
NF EN 1993 1-2 : 2005	EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-2: GENERAL RULES - STRUCTURAL FIRE DESIGN
NF EN 50216-9 : 2009	POWER TRANSFORMER AND REACTOR FITTINGS - PART 9: OIL-TO-WATER HEAT EXCHANGERS
NF ENV 1998 1-1 : 2000 XP	EUROCODE 8: DESIGN PROVISIONS FOR EARTHQUAKE RESISTANCE OF STRUCTURES AND NATIONAL APPLICATION DOCUMENT - PART 1-1: GENERAL RULES - SEISMIC ACTIONS AND REQUIREMENTS FOR STRUCTURES
NF ENV 1993 1-3 : 99 XP	STEEL CONSTRUCTION - EUROCODE 3: DESIGN OF STEEL STRUCTURES AND NATIONAL APPLICATION DOCUMENT - PART 1-3: GENERAL RULES - SUPPLEMENTARY RULES FOR COLD FORMED THIN GAUGE MEMBERS AND SHEETING
XP P98 422 : 2000 XP	ROAD SAFETY BARRIERS - REINFORCED CONCRETE AND METAL BN1 AND BN2 SAFETY BARRIERS - COMPOSITION, OPERATION, HOLDING PERFORMANCES, INSTALLATION AND MOUNTING CONDITIONS, COMPONENTS
NF EN 1993-4-1 : 2007	EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 4-1: SILOS