Customer Support: 131 242

  • There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

NF EN 60939-1 : 2011

Current
Current

The latest, up-to-date edition.

PASSIVE FILTER UNITS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION - PART 1: GENERIC SPECIFICATION
Published date

12-01-2013

1 General
  1.1 Scope
  1.2 Normative references
2 Technical data
  2.1 Units, symbols and terminology
  2.2 Definitions
  2.3 Preferred values
  2.4 Marking
3 Quality assessment procedures
  3.1 General
  3.2 Primary stage of manufacture
  3.3 Subcontracting
  3.4 Structurally similar filters
  3.5 Qualification approval procedures
  3.6 Capability approval procedures
  3.7 Rework and repair work
  3.8 Release for delivery
  3.9 Certified test records
  3.10 Delayed delivery
  3.11 Alternative test methods
  3.12 Unchecked parameters
4 Test and measurement procedures
  4.1 General
  4.2 Standard atmospheric conditions
  4.3 Drying
  4.4 Visual examination and check of dimensions
  4.5 Voltage tests
  4.6 Insertion loss
  4.7 Discharge resistance
  4.8 Robustness of terminations
  4.9 Resistance to soldering heat
  4.10 Solderability
  4.11 Rapid change of temperature
  4.12 Vibration
  4.13 Bump
  4.14 Shock
  4.15 Container sealing
  4.16 Climatic sequence
  4.17 Damp heat, steady state
  4.18 Temperature rise
  4.19 Current overload
  4.20 Endurance
  4.21 Charge and discharge test
  4.22 Passive flammability
  4.23 Active flammability
  4.24 Solvent resistance of marking
  4.25 Component solvent resistance
Annex ZA (normative) Normative references to international
                     publications with their corresponding
                     European publications

Applies to passive filter units for electromagnetic interference suppression for use within, or associated with, electronic or electrical equipment and machines.

DevelopmentNote
Indice de classement: C93-030-1. PR NF EN 60939-1 February 2004. (02/2004) PR NF EN 60939-1 July 2010. (07/2010)
DocumentType
Standard
PublisherName
Association Francaise de Normalisation
Status
Current

Standards Relationship
NBN EN 60939-1 : 2010 Identical
DIN EN 60939-1 : 2011 Identical
IEC 60939-1:2010 Identical
BS EN 60939-1:2010 Identical
EN 60939-1:2010 Identical

NF EN 60939-2 : 2005 PASSIVE FILTER UNITS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION - PART 2: SECTIONAL SPECIFICATION: PASSIVE FILTER UNITS FOR WHICH SAFETY TESTS ARE APPROPRIATE - TEST METHODS AND GENERAL REQUIREMENTS

IEC 60384-14:2013+AMD1:2016 CSV Fixed capacitors for use in electronic equipment - Part 14: Sectional specification - Fixed capacitors for electromagnetic interference suppression and connection to the supply mains
IEC 60068-1:2013 Environmental testing - Part 1: General and guidance
IEC 60068-2-27:2008 Environmental testing - Part 2-27: Tests - Test Ea and guidance: Shock
IEC 60068-2-20:2008 Environmental testing - Part 2-20: Tests - Test T: Test methods for solderability and resistance to soldering heat of devices with leads
IEC 60068-2-21:2006 Environmental testing - Part 2-21: Tests - Test U: Robustness of terminations and integral mounting devices
IEC 60068-2-13:1983 Basic environmental testing procedures - Part 2-13: Tests - Test M: Low air pressure
IEC 60085:2007 Electrical insulation - Thermal evaluation and designation
IEC 60410:1973 Sampling plans and procedures for inspection by attributes
IEC 60294:2012 Measurement of the dimensions of a cylindrical component with axial terminations
IEC 60068-2-17:1994 Basic environmental testing procedures - Part 2-17: Tests - Test Q: Sealing
IEC 60068-2-2:2007 Environmental testing - Part 2-2: Tests - Test B: Dry heat
IEC 60062:2016 Marking codes for resistors and capacitors
CISPR 17:2011 Methods of measurement of the suppression characteristics of passive EMC filtering devices
IEC 60068-2-29:1987 Environmental testing. Part 2: Tests. Test Eb and guidance: Bump
IEC 60068-2-1:2007 Environmental testing - Part 2-1: Tests - Test A: Cold
IEC 60695-11-5 : 2.0 FIRE HAZARD TESTING - PART 11-5: TEST FLAMES - NEEDLE-FLAME TEST METHOD - APPARATUS, CONFIRMATORY TEST ARRANGEMENT AND GUIDANCE
IEC 60068-2-14:2009 Environmental testing - Part 2-14: Tests - Test N: Change of temperature
IEC 60068-2-30:2005 Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Need help?
Call us on 131 242, then click here to start a Screen Sharing session
so we can help right away! Learn more