CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-116: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR PROTECTIVE HOUSINGS FOR USE WITH 8-WAY SHIELDED AND UNSHIELDED CONNECTORS FOR FREQUENCIES UP TO 600 MHZ FOR INDUSTRIAL ENVIRONMENTS INCORPORATING THE IEC 60603-7 SERIES INTERFACE - VARIANT 13 RELATED TO IEC 61076-3-106 - LOCKING LEVER

Published date

12-01-2013

Publisher

Association Francaise de Normalisation

AVANT-PROPOS
1 Données générales
  1.1 Domaine d'application
  1.2 Références normatives
2 Termes et définitions
3 Informations relatives aux dimensions
  3.1 Caractéristiques communes
  3.2 Généralités
  3.3 Disposition des contacts de tous les types de
      connecteurs
  3.4 Etanchéité IP65 et IP
  3.5 Variante 13 - CEI 60603-7 industrielle - Levier
      de verrouillage
  3.6 Informations concernant la sortie et le montage
  3.7 Généralités
  3.8 Informations concernant le montage pour la variante
      13, embase
  3.9 Bouchon pour embase, variante 13
4 Calibres
  4.1 Connecteurs, interface CEI 60603-7
5 Caractéristiques
  5.1 Catégorie climatique
  5.2 Caractéristiques électriques
  5.3 Caractéristiques de transmission
6 Programme d'essai
  6.1 Généralités
  6.2 Procédures d'essai et méthodes de mesure
  6.3 Préconditionnement
  6.4 Câblage et montage des échantillons
  6.5 Disposition pour l'essai de la résistance de contact
  6.6 Disposition pour les essais de contrainte dynamique
      (phase d'essai AP2)
  6.7 Programme d'essais de base (minimal)
  6.8 Programme d'essais complet

La présente partie de la CEI 61076 couvre les boîtiers de protection pour améliorer les connecteurs à 8 voies blindés et non blindés existants utilisant l'interface décrite dans la CEI 60603-7-2, la CEI 60603-7-3, la CEI 60603-7-4, la CEI 60603-7-5 et la CEI 60603-7-7 pour les caractéristiques IP65 et IP67 conformément à la CEI 60529, utilisés dans les environnements industriels.

DevelopmentNote	Indice de classement: C93-406-3-116. PR NF EN 61076-3-116 May 2007. (05/2007)
DocumentType	Standard
PublisherName	Association Francaise de Normalisation
Status	Current

Standards	Relationship
IEC 61076-3-116:2008	Identical
EN 61076-3-116 : 2008	Identical

IEC 60603-7-1:2011	Connectors for electronic equipment - Part 7-1: Detail specification for 8-way, shielded, free and fixed connectors
NF EN 60603-7 : 2010	CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 7: DETAIL SPECIFICATION FOR 8-WAY, UNSHIELDED, FREE AND FIXED CONNECTORS
IEC 61076-1:2006	Connectors for electronic equipment - Product requirements - Part 1: Generic specification
NF EN 60603-7-4 : 2010	CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 7-4: DETAIL SPECIFICATION FOR 8-WAY, UNSHIELDED, FREE AND FIXED CONNECTORS, FOR DATA TRANSMISSIONS WITH FREQUENCIES UP TO 250 MHZ
NF EN 61076-1 : 2006	CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 1: GENERIC SPECIFICATION
IEC 60068-1:2013	Environmental testing - Part 1: General and guidance
IEC 60603-7-2:2010	Connectors for electronic equipment - Part 7-2: Detail specification for 8-way, unshielded, free and fixed connectors, for data transmissions with frequencies up to 100 MHz
NF EN 60664-1 : 2007	INSULATION COORDINATION FOR EQUIPMENT WITHIN LOW-VOLTAGE SYSTEMS - PART 1: PRINCIPLES, REQUIREMENTS AND TESTS
NF EN 60603-7-7 : 2012	CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 7-7: DETAIL SPECIFICATION FOR 8-WAY, SHIELDED, FREE AND FIXED CONNECTORS FOR DATA TRANSMISSION WITH FREQUENCIES UP TO 600 MHZ
NF EN 60603-7-5 : 2011	CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 7-5: DETAIL SPECIFICATION FOR 8-WAY, SHIELDED, FREE AND FIXED CONNECTORS, FOR DATA TRANSMISSIONS WITH FREQUENCIES UP TO 250 MHZ
NF EN 60603-7-1 : 2012	CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 7-1: DETAIL SPECIFICATION FOR 8-WAY, SHIELDED, FREE AND FIXED CONNECTORS
NF EN 60529 : 92 AMD 2 2014	DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE)
NF EN 60603-7-2 : 2011	CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 7-2: DETAIL SPECIFICATION FOR 8-WAY, UNSHIELDED, FREE AND FIXED CONNECTORS, FOR DATA TRANSMISSION WITH FREQUENCIES UP TO 100 MHZ
NFC 01 581 : 82 AMD 1 1999	ELECTROTECHNICAL VOCABULARY - CHAPTER 581 - ELECTROMECHANICAL COMPONENTS FOR ELECTRONIC EQUIPMENT
NF EN 60512-1 : 2001	CONNECTORS FOR ELECTRONIC EQUIPMENT - TEST AND MEASUREMENTS - PART 1: GENERAL
IEC 61156-2:2010	Multicore and symmetrical pair/quad cables for digital communications - Part 2: Symmetrical pair/quad cables with transmission characteristics up to 100 MHz - Horizontal floor wiring - Sectional specification
IEC 60603-7-3:2010	Connectors for electronic equipment - Part 7-3: Detail specification for 8-way, shielded, free and fixed connectors, for data transmission with frequencies up to 100 MHz
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV	Degrees of protection provided by enclosures (IP Code)
IEC 60603-7:2008+AMD1:2011 CSV	Connectors for electronic equipment - Part 7: Detail specification for 8-way, unshielded, free and fixed connectors
NF EN 60068-1 : 2014	ENVIRONMENTAL TESTING - PART 1: GENERAL AND GUIDANCE
NF EN 60068 2-14 : 2009	ENVIRONMENTAL TESTING - PART 2-14: TESTS - TEST N: CHANGE OF TEMPERATURE
IEC 60512-1-100:2012	Connectors for electronic equipment - Tests and measurements - Part 1-100: General - Applicable publications
NF EN 60512-1-100 : 2012	CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 1-100: GENERAL - APPLICABLE PUBLICATIONS
IEC 61156-4:2009	Multicore and symmetrical pair/quad cables for digital communications - Part 4: Riser cables - Sectional specification
IEC 60603-7-5:2010	Connectors for electronic equipment - Part 7-5: Detail specification for 8-way, shielded, free and fixed connectors, for data transmissions with frequencies up to 250 MHz
IEC 61156-3:2008	Multicore and symmetrical pair/quad cables for digital communications - Part 3: Work area cable - Sectional specification
IEC 60512-1:2001	Connectors for electronic equipment - Tests and measurements - Part 1: General
IEC 60068-2-14:2009	Environmental testing - Part 2-14: Tests - Test N: Change of temperature
IEC 60603-7-7:2010	Connectors for electronic equipment - Part 7-7: Detail specification for 8-way, shielded, free and fixed connectors for data transmission with frequencies up to 600 MHz
IEC 60664-1:2007	Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests
IEC 60050-581:2008	International Electrotechnical Vocabulary (IEV) - Part 581: Electromechanical components for electronic equipment
NF EN 60603-7-3 : DEC 2010	CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 7-3: DETAIL SPECIFICATION FOR 8-WAY, SHIELDED, FREE AND FIXED CONNECTORS, FOR DATA TRANSMISSIONS WITH FREQUENCIES UP TO 100 MHZ
IEC 60603-7-4:2010	Connectors for electronic equipment - Part 7-4: Detail specification for 8-way, unshielded, free and fixed connectors, for data transmissions with frequencies up to 250 MHz
IEC 60068-2-30:2005	Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)