Customer Support: 131 242

  • There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

NF ISO 8434-6 : 2009

Current
Current

The latest, up-to-date edition.

METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 6: 60 DEGREES CONE CONNECTORS WITH OR WITHOUT O-RING
Published date

12-01-2013

Avant-propos
Introduction
1 Domaine d'application
2 Références normatives
3 Termes et définitions
4 Matériaux
   4.1 Généralités
   4.2 Corps de connecteurs
   4.3 Écrous
   4.4 Joints toriques
5 Exigences relatives à la pression/température
6 Désignation des connecteurs
7 Exigences relatives aux tubes
8 Cotes surplats et tolérances
9 Conception
   9.1 Connecteurs
   9.2 Dimensions
   9.3 Tolérances de passage
   9.4 Tolérances angulaires
   9.5 Détails du contour
   9.6 Orifices et éléments mâles
10 Filetages
   10.1 Extrémités de raccordement de connecteurs à
        cone à 60 degrés
   10.2 Éléments mâles (extrémités de raccordement)
11 Fabrication
   11.1 Construction
   11.2 Qualité d'exécution
   11.3 Finition
   11.4 Protection des connecteurs
   11.5 Arêtes
12 Instructions de montage
13 Informations relatives à l'achat
14 Marquage des composants
15 Essai de performance et de qualification
   15.1 Exigences de performance
   15.2 Formulaire de données d'essai
16 Phrase d'identification (référence à la présente partie
   de l'ISO 8434)
Annexe A (informative) - Détails des gorges de filetage
         préférentielles lorsque des joints composites
         sont utilisés
Bibliographie

La présente partie de l'ISO 8434 spécifie les exigences générales et dimensionnelles pour la conception et la performance des connecteurs à cone à 60 degrés et des embouts à souder avec ou sans joint torique, réalisés en acier pour des diamètres extérieurs de tubes compris entre 6 mm et 50 mm inclus, ou des diamètres de tuyaux flexibles compris entre 5 et 51 inclus. Ces connecteurs sont utilisés dans les transmissions hydrauliques et pneumatiques et pour les applications générales dans les limites de pression et de température spécifiées dans la présente partie de l'ISO 8434. Ils sont prévus pour le raccordement de tubes et de tuyaux flexibles à des orifices conformes à l'ISO 6149-1 et à l'ISO 1179-1. Ces connecteurs permettent des raccordements étanches, plein débit dans les systèmes hydrauliques fonctionnant aux pressions de service indiquées dans le Tableau 1.

DevelopmentNote
Indice de classement: E48-064-6. PR NF ISO 8434-6 April 2007. (04/2007)
DocumentType
Standard
PublisherName
Association Francaise de Normalisation
Status
Current

Standards Relationship
ISO 8434-6:2009 Identical

ISO 1179-1:2013 Connections for general use and fluid power — Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing — Part 1: Threaded ports
ISO 5598:2008 Fluid power systems and components Vocabulary
ISO 4759-1:2000 Tolerances for fasteners — Part 1: Bolts, screws, studs and nuts — Product grades A, B and C
ISO 3305:1985 Plain end welded precision steel tubes — Technical conditions for delivery
ISO 6149-3:2006 Connections for hydraulic fluid power and general use Ports and stud ends with ISO 261 metric threads and O-ring sealing Part 3: Dimensions, design, test methods and requirements for light-duty (L series) stud ends
ISO 19879:2010 Metallic tube connections for fluid power and general use Test methods for hydraulic fluid power connections
ISO 6149-1:2006 Connections for hydraulic fluid power and general use Ports and stud ends with ISO 261 metric threads and O-ring sealing Part 1: Ports with truncated housing for O-ring seal
ISO 3304:1985 Plain end seamless precision steel tubes — Technical conditions for delivery
ISO 9227:2017 Corrosion tests in artificial atmospheres — Salt spray tests
ISO 261:1998 ISO general purpose metric screw threads General plan
ISO 10763:1994 Hydraulic fluid power Plain-end, seamless and welded precision steel tubes Dimensions and nominal working pressures
ISO 3601-3:2005 Fluid power systems O-rings Part 3: Quality acceptance criteria
ISO 48:2010 Rubber, vulcanized or thermoplastic Determination of hardness (hardness between 10 IRHD and 100 IRHD)
ISO 1179-2:2013 Connections for general use and fluid power — Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing — Part 2: Heavy-duty (S series) and light-duty (L series) stud ends with elastomeric sealing (type E)
ISO 228-1:2000 Pipe threads where pressure-tight joints are not made on the threads Part 1: Dimensions, tolerances and designation
ISO 1179-3:2007 Connections for general use and fluid power Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing Part 3: Light-duty (L series) stud ends with sealing by O-ring with retaining ring (types G and H)

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Need help?
Call us on 131 242, then click here to start a Screen Sharing session
so we can help right away! Learn more