Name: ONORM EN 12301 : 2009
Brand: ON

ONORM EN 12301 : 2009

Withdrawn

View Superseded by

PLASTICS AND RUBBER MACHINES - CALENDERS - SAFETY REQUIREMENTS

Withdrawn date

15-02-2020

Published date

12-01-2013

Publisher

Osterreichisches Normungsinstitut/Austrian Standards

Foreword
Introduction
1 Scope
2 Normative references
3 Definitions
4 List of hazards
      4.1 Mechanical hazards
      4.2 Electrical hazards
      4.3 Thermal hazards
      4.4 Hazards due to noise
      4.5 Hazards generated by neglecting ergonomic
             principles
      4.6 Hazards due to failure to energy supply
      4.7 Hazards due to failure of the control systems
      4.8 Slip, trip and fall hazards
5 Safety requirements and/or measures
      5.1 Mechanical hazards
      5.2 Electrical hazards
      5.3 Thermal hazards
      5.4 Hazards due to noise
      5.5 Hazards generated by neglecting ergonomic
             principles
      5.6 Hazards due to failure to energy supply
      5.7 Hazards due to failure of the control systems
      5.8 Slip, trip and fall hazards
6 Verification of the safety requirements and/or
      measures
7 Information for use
      7.1 Instruction handbook
      7.2 Marking
Annex A (informative) Examples of different types of
                      calenders
Annex B (informative) Examples of calendering processes
Annex C (informative) Hazards generated by the materials
                      being processed
Annex D (informative) Calculation of dimension L of the
                      trapping zone (for rolls of equal
                      diameters)
Annex E (informative) Fixed guards at the trapping zone
Annex F (informative) Example of a particular type of guard
                      with limited movement preventing
                      access to the trapping zone
Annex ZA (informative) Clauses of this European Standard
                       addressing essential requirements or
                       other provisions of EU directives
Bibliography

Requirements for safety relating to the design and construction of multi-roll calenders intended for the processing of rubber or plastics are defined. The calender alone, including all components fixed to its frame are concerned with this standard. Examples of various types of calenders are shown in Annex A and calendering processes are shown in Annex B. The standard deals with the significant hazards listed in Clause 4. The following machines are excluded: two-roll calender forming an integral unit with an extruder (roller head); two or three-roll polishing, laminating and embossing units (which are not calenders) installed downstream of extruders in film processing lines.

Committee	TC 052
DocumentType	Standard
PublisherName	Osterreichisches Normungsinstitut/Austrian Standards
Status	Withdrawn
SupersededBy	ÖNORM EN 12301: 2020 02 15

Standards	Relationship
EN 12301:2000+A1:2008	Identical
DIN EN 12301:2015-12 (Draft)	Identical
BS EN 12301 : 2000	Identical
UNE-EN 12301:2001	Identical
UNI EN 12301 : 2008	Identical
I.S. EN 12301:2000	Identical
NBN EN 12301 : 2000 + A1 2008	Identical
NEN EN 12301 : 2000 + A1 2008	Identical
NS EN 12301 : 2000 + A1 2008	Identical
SN EN 12301 : 2000 + A1 2008	Identical
NF EN 12301 : 2000 + A1 2008	Identical
DIN EN 12301:2010-02	Identical

ONORM EN ISO 3743-2 : 2009	ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES USING SOUND PRESSURE - ENGINEERING METHODS FOR SMALL, MOVABLE SOURCES IN REVERBERANT FIELDS - PART 2: METHODS FOR SPECIAL REVERBERATION TEST ROOMS
ISO 11202:2010	Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections
ISO 4871:1996	Acoustics — Declaration and verification of noise emission values of machinery and equipment
ISO 3744:2010	Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for an essentially free field over a reflecting plane
ISO/TR 11688-1:1995	Acoustics Recommended practice for the design of low-noise machinery and equipment Part 1: Planning
ISO 3743-2:1994	Acoustics Determination of sound power levels of noise sources using sound pressure Engineering methods for small, movable sources in reverberant fields Part 2: Methods for special reverberation test rooms
ONORM EN ISO 13857 : 2008	SAFETY OF MACHINERY - SAFETY DISTANCES TO PREVENT HAZARD ZONES BEING REACHED BY UPPER AND LOWER LIMBS
ISO 9614-1:1993	Acoustics — Determination of sound power levels of noise sources using sound intensity — Part 1: Measurement at discrete points
ISO 9614-2:1996	Acoustics — Determination of sound power levels of noise sources using sound intensity — Part 2: Measurement by scanning
ONORM EN ISO 11204 : AUG 2010	ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORK STATION AND AT OTHER SPECIFIED POSITIONS APPLYING ACCURATE ENVIRONMENTAL CORRECTIONS
ISO 3746:2010	Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Survey method using an enveloping measurement surface over a reflecting plane
ISO 12100-2:2003	Safety of machinery Basic concepts, general principles for design Part 2: Technical principles
ISO 13857:2008	Safety of machinery Safety distances to prevent hazard zones being reached by upper and lower limbs
ISO 11203:1995	Acoustics — Noise emitted by machinery and equipment — Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level
ISO 12100-1:2003	Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology
ISO/TR 11688-2:1998	Acoustics Recommended practice for the design of low-noise machinery and equipment Part 2: Introduction to the physics of low-noise design
ONORM EN ISO 11203 : 2010	ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORK STATION AND AT OTHER SPECIFIED POSITIONS FROM THE SOUND POWER LEVEL
ISO 11201:2010	Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections
ISO 11204:2010	Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions applying accurate environmental corrections
ONORM EN ISO 11202 : 2010	ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORK STATION AND AT OTHER SPECIFIED POSITIONS APPLYING APPROXIMATE ENVIRONMENTAL CORRECTIONS
ISO 3743-1:2010	Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for small movable sources in reverberant fields Part 1: Comparison method for a hard-walled test room