Customer Support: 131 242

  • There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

PD CEN/TR 15419:2017

Current
Current

The latest, up-to-date edition.

Protective clothing. Guidelines for selection, use, care and maintenance of chemical protective clothing
Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

15-12-2017

European foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviations
4 Selection
5 Use and training for safe use
6 Care
7 Maintenance
Annex A (informative) - Rationale
Annex B (informative) - Risk assessment scheme
Annex C (informative) - Example of a label
Bibliography

Primarily intended for users, specifiers and others with responsibility for the procurement and provision of chemical protective clothing.

This Technical Report is primarily intended for users, specifiers and others with responsibility for the procurement and provision of chemical protective clothing. It is also intended to be used by manufacturers in their dialogue with the users of PPE. This Technical Report is intended to clarify the inter-relationship of the set of standards, developed by CEN/TC 162 WG 3, and to explain the main ideas behind these standards. This set of standards has been developed in support of the European legislation on PPE and is currently used as a major technical tool for the assessment and certification of CPC before it is put on the European market. These guidelines are intended to assist users and specifiers in selecting the correct type of CPC for the task to be performed, and to help them ensure it is used according to the manufacturer\'s instructions to provide adequate protection during its entire lifetime. Lifetime and effectiveness of protective clothing depend largely on care and maintenance. When cleaning, disinfection and end-of-life disposal are considered the environmental impact should also be taken into account. This Technical Report does not address chemical nuisance factors without potential impact on a person\'s health and safety, e.g. smell.

Committee
PH/3/3
DocumentType
Standard
Pages
49
PublisherName
British Standards Institution
Status
Current
Supersedes

Standards Relationship
CEN/TR 15419:2017 Identical

EN 943-1:2015 Protective clothing against dangerous solid, liquid and gaseous chemicals, including liquid and solid aerosols - Part 1: Performance requirements for Type 1 (gas-tight) chemical protective suits
EN 530:2010 Abrasion resistance of protective clothing material - Test methods
ISO 13934-1:2013 Textiles — Tensile properties of fabrics — Part 1: Determination of maximum force and elongation at maximum force using the strip method
EN ISO 17491-4:2008/A1:2016 Protective clothing - Test methods for clothing providing protection against chemicals - Part 4: Determination of resistance to penetration by a spray of liquid (spray test) (ISO 17491-4:2008/Amd 1:2016)
EN 943-2:2002 Protective clothing against liquid and gaseous chemicals, including liquid aerosols and solid particles - Part 2: Performance requirements for "gas-tight" (Type 1) chemical protective suits for emergency teams (ET)
EN ISO 374-1:2016 Protective gloves against dangerous chemicals and micro-organisms - Part 1: Terminology and performance requirements for chemical risks (ISO 374-1:2016)
EN ISO 13982-2:2004 Protective clothing for use against solid particulates - Part 2: Test method of determination of inward leakage of aerosols of fine particles into suits (ISO 13982-2:2004)
EN 13034:2005+A1:2009 Protective clothing against liquid chemicals - Performance requirements for chemical protective clothing offering limited protective performance against liquid chemicals (Type 6 and Type PB [6] equipment)
ISO 6530:2005 Protective clothing — Protection against liquid chemicals — Test method for resistance of materials to penetration by liquids
ISO 9073-4:1997 Textiles Test methods for nonwovens Part 4: Determination of tear resistance
EN ISO 13934-1:2013 Textiles - Tensile properties of fabrics - Part 1: Determination of maximum force and elongation at maximum force using the strip method (ISO 13934-1:2013)
EN 14786:2006 Protective clothing - Determination of resistance to penetration by sprayed liquid chemicals, emulsions and dispersions - Atomizer test
EN ISO 17491-3:2008 Protective clothing - Test methods for clothing providing protection against chemicals - Part 3: Determination of resistance to penetration by a jet of liquid (jet test) (ISO 17491-3:2008)
EN ISO 7854 : 1997 RUBBER- OR PLASTICS-COATED FABRICS - DETERMINATION OF RESISTANCE TO DAMAGE BY FLEXING
EN ISO 14116:2015 Protective clothing - Protection against flame - Limited flame spread materials, material assemblies and clothing (ISO 14116:2015)
89/686/EEC : 1989 AMD 5 2012 COUNCIL DIRECTIVE OF 21 DECEMBER 1989 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO PERSONAL PROTECTIVE EQUIPMENT
ISO 13688:2013 Protective clothing — General requirements
EN 1149-1:2006 Protective clothing - Electrostatic properties - Part 1: Test method for measurement of surface resistivity
EN 16523-1:2015 Determination of material resistance to permeation by chemicals - Part 1: Permeation by liquid chemical under conditions of continuous contact
EN 1073-1:2016/AC:2016 PROTECTIVE CLOTHING AGAINST SOLID AIRBORNE PARTICLES INCLUDING RADIOACTIVE CONTAMINATION - PART 1: REQUIREMENTS AND TEST METHODS FOR COMPRESSED AIR LINE VENTILATED PROTECTIVE CLOTHING, PROTECTING THE BODY AND THE RESPIRATORY TRACT
ISO 14116:2015 Protective clothing — Protection against flame — Limited flame spread materials, material assemblies and clothing
ISO 26986:2010 Resilient floor coverings Expanded (cushioned) poly(vinyl chloride) floor covering Specification
EN ISO 9073-4:1997 TEXTILES - TEST METHODS FOR NONWOVENS - PART 4: DETERMINATION OF TEAR RESISTANCE
EN 863:1995 Protective clothing - Mechanical properties - Test method: Puncture resistance
EN 13274-4:2001 Respiratory protective devices - Methods of test - Part 4: Flame tests
EN 133:2001 Respiratory protective devices - Classification
ISO 13982-1:2004 Protective clothing for use against solid particulates — Part 1: Performance requirements for chemical protective clothing providing protection to the full body against airborne solid particulates (type 5 clothing)
EN ISO 13982-1:2004/A1:2010 Protective clothing for use against solid particulates - Part 1: Performance requirements for chemical protective clothing providing protection to the full body against airborne solid particulates (type 5 clothing) - Amendment 1 (ISO 13982-1:2004/Amd 1:2010)
ISO 374-1:2016 Protective gloves against dangerous chemicals and micro-organisms Part 1: Terminology and performance requirements for chemical risks
ISO 7854:1995 Rubber- or plastics-coated fabrics Determination of resistance to damage by flexing
EN 420:2003+A1:2009 Protective gloves - General requirements and test methods
EN ISO 9001:2015 Quality management systems - Requirements (ISO 9001:2015)
EN ISO 6530:2005 Protective clothing - Protection against liquid chemicals - Test method for resistance of materials to penetration by liquids (ISO 6530:2005)
EN 14325:2004 Protective clothing against chemicals - Test methods and performance classification of chemical protective clothing materials, seams, joins and assemblages
EN ISO 13938-1 : 1999 TEXTILES - BURSTING PROPERTIES OF FABRICS - PART 1: HYDRAULIC METHOD FOR DETERMINATION OF BURSTING STRENGTH AND BURSTING DISTENSION
ISO 13982-2:2004 Protective clothing for use against solid particulates — Part 2: Test method of determination of inward leakage of aerosols of fine particles into suits
ISO 9001:2015 Quality management systems — Requirements
EN ISO 13688:2013 Protective clothing - General requirements (ISO 13688:2013)
EN 14605:2005+A1:2009 Protective clothing against liquid chemicals - performance requirements for clothing with liquid-tight (Type 3) or spray-tight (Type 4) connections, including items providing protection to parts of the body only (Types PB [3] and PB [4])
ISO 17491-3:2008 Protective clothing — Test methods for clothing providing protection against chemicals — Part 3: Determination of resistance to penetration by a jet of liquid (jet test)
ISO 13938-1:1999 Textiles Bursting properties of fabrics Part 1: Hydraulic method for determination of bursting strength and bursting distension
EN 1149-5:2008 Protective clothing - Electrostatic properties - Part 5: Material performance and design requirements
EN ISO 26986:2012/AC:2012 RESILIENT FLOOR COVERINGS - EXPANDED (CUSHIONED) POLY(VINYL CHLORIDE) FLOOR COVERING - SPECIFICATION (ISO 26986:2010)
ISO 6529:2013 Protective clothing Protection against chemicals Determination of resistance of protective clothing materials to permeation by liquids and gases
EN 464:1994 Protective clothing - Protection against liquid and gaseous chemicals, including aerosols and solid particles - Test method: Determination of leak-tightness of gas-tight suits (Internal pressure test)
ISO 17491-4:2008 Protective clothing Test methods for clothing providing protection against chemicals Part 4: Determination of resistance to penetration by a spray of liquid (spray test)
EN 14126:2003/AC:2004 PROTECTIVE CLOTHING - PERFORMANCE REQUIREMENTS AND TESTS METHODS FOR PROTECTIVE CLOTHING AGAINST INFECTIVE AGENTS
EN 1149-3:2004 Protective clothing - Electrostatic properties - Part 3: Test methods for measurement of charge decay
EN 1073-2:2002 Protective clothing against radioactive contamination - Part 2: Requirements and test methods for non-ventilated protective clothing against particulate radioactive contamination

View more information
$541.18
Including GST where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Need help?
Call us on 131 242, then click here to start a Screen Sharing session
so we can help right away! Learn more