Customer Support: 131 242

  • There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

PD CEN/TS 16811-3:2015

Current
Current

The latest, up-to-date edition.

Winter maintenance equipment. De-icing agents Other solid and liquid de-icing agents. Requirements and test methods
Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

30-11-2015

European foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Requirements and test methods
5 Sampling
Annex A (normative) - Product description for other
        solid and liquid de-icing agents
Annex B (normative) - Sampling
Annex C (normative) - Test methods
Annex D (informative) - Determination of de-icing
        performance (Inzell-Test)
Annex E (informative) - Transport, handling and storage
Annex F (informative) - Technical aspects of durability
        of concrete
Annex G (informative) - Test results with the chlorides
        of sodium, calcium and magnesium
Bibliography

Describes general specifications and performance criteria of other solid and liquid de-icing agents than chlorides of sodium, calcium and magnesium, hereinafter referred to products, which are used with their particular properties for specific uses in winter service on roads and other traffic areas, with the exception of runways and parking areas of aircrafts.

This Technical Specification defines general specifications and performance criteria of other solid and liquid de-icing agents than chlorides of sodium, calcium and magnesium, hereinafter referred to products, which are used with their particular properties for specific uses in winter service on roads and other traffic areas, with the exception of runways and parking areas of aircrafts. It establishes the test methods to control them. The products include inorganic and organic de-icing agents, and mixtures of chlorides of sodium, calcium, magnesium and potassium with organic and inorganic components which are intended for special properties like inhibition of corrosion, enhanced melting capacity or improved spreading pattern. NOTE This Technical Specification defines specifications and performance criteria and offers for each a variation in the form of classes of requirements. This does not mean that there are products likely to respond to all the classes and criteria of the standard. Therefore, when defining the demand the user needs to make sure prior the appropriateness of his choice and the availability of suitable products.

Committee
B/513
DocumentType
Standard
Pages
44
PublisherName
British Standards Institution
Status
Current

Standards Relationship
CEN/TS 16811-3:2015 Identical

CEN/TS 15597-2:2012 Winter maintenance equipment - Spreading machines (gritting machines) - Part 2: Requirements for distribution and its test
ISO 11130:2010 Corrosion of metals and alloys Alternate immersion test in salt solution
ISO 9377-2:2000 Water quality Determination of hydrocarbon oil index Part 2: Method using solvent extraction and gas chromatography
EN ISO 11885:2009 Water quality - Determination of selected elements by inductively coupled plasma optical emission spectrometry (ICP-OES) (ISO 11885:2007)
EN 573-5:2007 Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 5: Codification of standardized wrought products
EN 27888 : 1993 WATER QUALITY - DETERMINATION OF ELECTRICAL CONDUCTIVITY
EN 573-2:1994 Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 2: Chemical symbol based designation system
EN ISO 3104:1996 Petroleum products - Transparent and opaque liquids - Determination of kinematic viscosity and calculation of dynamic viscosity (ISO 3104:1994)
ISO 5815-1:2003 Water quality Determination of biochemical oxygen demand after n days (BODn) Part 1: Dilution and seeding method with allylthiourea addition
EN ISO 1461:2009 Hot dip galvanized coatings on fabricated iron and steel articles - Specifications and test methods (ISO 1461:2009)
PREN 16811-1 : DRAFT 2014 WINTER SERVICE EQUIPMENT - DE-ICING AGENTS - PART 1: SODIUM CHLORIDE - REQUIREMENTS AND TEST METHODS
EN 13036-1:2010 Road and airfield surface characteristics - Test methods - Part 1: Measurement of pavement surface macrotexture depth using a volumetric patch technique
ISO 565:1990 Test sieves — Metal wire cloth, perforated metal plate and electroformed sheet — Nominal sizes of openings
EN 1484 : 1997 WATER ANALYSIS - GUIDELINES FOR THE DETERMINATION OF TOTAL ORGANIC CARBON (TOC) AND DISSOLVED ORGANIC CARBON (DOC)
ISO 1461:2009 Hot dip galvanized coatings on fabricated iron and steel articles — Specifications and test methods
ISO 2591-1:1988 Test sieving — Part 1: Methods using test sieves of woven wire cloth and perforated metal plate
ISO 12846:2012 Water quality — Determination of mercury — Method using atomic absorption spectrometry (AAS) with and without enrichment
ISO 6060:1989 Water quality — Determination of the chemical oxygen demand
ISO 11885:2007 Water quality Determination of selected elements by inductively coupled plasma optical emission spectrometry (ICP-OES)
ISO 8397:1988 Solid fertilizers and soil conditioners Test sieving
PREN 16811-2 : DRAFT 2014 WINTER MAINTENANCE EQUIPMENT - DE-ICING AGENTS - PART 2: CALCIUM CHLORIDE AND MAGNESIUM CHLORIDE - REQUIREMENTS AND TEST METHODS
ISO 1523:2002 Determination of flash point — Closed cup equilibrium method
ISO 758:1976 Liquid chemical products for industrial use — Determination of density at 20 degrees C
ISO 15705:2002 Water quality Determination of the chemical oxygen demand index (ST-COD) Small-scale sealed-tube method
EN 14231:2003 Natural stone test methods - Determination of the slip resistance by means of the pendulum tester
EN 10025-5:2004 Hot rolled products of structural steels - Part 5: Technical delivery conditions for structural steels with improved atmospheric corrosion resistance
ISO 7888:1985 Water quality — Determination of electrical conductivity
EN 15597-1:2009 Winter maintenance equipment — Spreading machines (gritting machines) — Part 1: General requirements and definitions for spreading machines
EN 10025-2:2004/AC:2005 HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR NON-ALLOY STRUCTURAL STEELS
EN 15144:2007 Winter maintenance equipment - Terminology - Terms for winter maintenance
EN 1236 : 1995 FERTILIZERS - DETERMINATION OF BULK DENSITY (LOOSE)
EN 15749:2009 Fertilizers - Determination of sulfates content using three different methods
ISO 649-2:1981 Laboratory glassware — Density hydrometers for general purposes — Part 2: Test methods and use
EN 1235:1995/A1:2003 SOLID FERTILIZERS - TEST SIEVING
EN 573-3:2013 Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 3: Chemical composition and form of products
EN 573-1:2004 Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 1: Numerical designation system
ISO 2479:1972 Sodium chloride for industrial use — Determination of matter insoluble in water or in acid and preparation of principal solutions for other determinations
EN ISO 9377-2 : 2000 WATER QUALITY - DETERMINATION OF HYDROCARBON OIL INDEX - PART 2: METHOD USING SOLVENT EXTRACTION AND GAS CHROMATOGRAPHY (ISO 9377-2:2000)
EN 206:2013+A1:2016 Concrete - Specification, performance, production and conformity
ISO 2480:1972 Sodium chloride for industrial use — Determination of sulphate content — Barium sulphate gravimetric method
ISO 3944:1992 Fertilizers — Determination of bulk density (loose)
EN ISO 1523:2002 Determination of flash point - Closed cup equilibrium method (ISO 1523:2002)
EN 932-1:1996 Tests for general properties of aggregates - Part 1: Methods for sampling

View more information
$478.43
Including GST where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Need help?
Call us on 131 242, then click here to start a Screen Sharing session
so we can help right away! Learn more