Customer Support: 131 242

  • There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

PREN 10253-4 : DRAFT 2017

Current
Current

The latest, up-to-date edition.

BUTT-WELDING PIPE FITTINGS - PART 4: WROUGHT AUSTENITIC & AUSTENITIC-FERRITIC (DUPLEX) STAINLESS STEELS WITH SPECIFIC INSPECTION REQUIREMENTS
Published date

12-01-2013

European foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols and abbreviations
5 Classification of grades and designation
6 Information to be supplied by the purchaser
7 Resistance to internal pressure
8 Manufacturing process
9 Technical requirements
10 Appearance and internal soundness (delivery conditions)
11 Dimensions and tolerances
12 Inspection
13 Sampling
14 Test methods
15 Marking
16 Protection and packaging
Annex A (normative) - Dimensions
Annex B (normative) - Determination of pressure
        factors and wall thickness
Annex C (normative) - Pressure factor Tables for
        fittings of type A
Annex D (informative) - Wall thickness tables for
        fittings of type B
Annex E (informative) - Reference data of strength
        values for creep rupture of austenitic steels in
        the solution annealed condition
Annex ZA (informative) - Relationship between this
         European Standard and the Essential Requirements
         of EU Directive 2014/68/EU
Bibliography

Defines the technical delivery requirements for seamless and welded butt-welding fittings (elbows, concentric and eccentric reducers, equal and reducing tees, caps) made of austenitic and austenitic-ferritic (duplex) stainless steel in two test-categories which are intended for pressure purposes at room temperature, at low temperature or at elevated temperatures, and for the transmission and distribution of fluids and gases.

Committee
ECISS/TC 110
DocumentType
Draft
PublisherName
Comite Europeen de Normalisation
Status
Current

Standards Relationship
17/30347091 DC Identical
03/108196 DC : 0 Identical

EN ISO 14284:2002 Steel and iron - Sampling and preparation of samples for the determination of chemical composition (ISO 14284:1996)
EN 10052:1993 Vocabulary of heat treatment terms for ferrous products
EN ISO 5817:2014 Welding - Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) - Quality levels for imperfections (ISO 5817:2014)
EN ISO 8493 : 2004 Metallic materials - Tube - Drift-expanding test (ISO 8493:1998)
EN 10228-4:2016 Non-destructive testing of steel forgings - Part 4: Ultrasonic testing of austenitic and austenitic-ferritic stainless steel forgings
EN 10027-2:2015 DESIGNATION SYSTEMS FOR STEELS - PART 2: NUMERICAL SYSTEM
EN 10216-5:2013 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes
EN ISO 6892-1:2016 Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO 6892-1:2016)
ISO 9712:2012 Non-destructive testing Qualification and certification of NDT personnel
EN ISO 10893-10:2011 Non-destructive testing of steel tubes - Part 10: Automated full peripheral ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of longitudinal and/or transverse imperfections (ISO 10893-10:2011)
EN ISO 5173:2010/A1:2011 DESTRUCTIVE TESTS ON WELDS IN METALLIC MATERIALS - BEND TESTS (ISO 5173:2009)
ISO 14732:2013 Welding personnel Qualification testing of welding operators and weld setters for mechanized and automatic welding of metallic materials
EN ISO 8495:2013 Metallic materials - Tube - Ring-expanding test (ISO 8495:2013)
EN ISO 377:2017 Steel and steel products - Location and preparation of samples and test pieces for mechanical testing (ISO 377:2017)
ISO 10893-8:2011 Non-destructive testing of steel tubes Part 8: Automated ultrasonic testing of seamless and welded steel tubes for the detection of laminar imperfections
ISO 6892-1:2016 Metallic materials Tensile testing Part 1: Method of test at room temperature
ISO 9606-1:2012 Qualification testing of welders — Fusion welding — Part 1: Steels
EN 10168:2004 Steel products - Inspection documents - List of information and description
EN ISO 2566-1:1999 Steel - Conversion of elongation values - Part 1: Carbon and low alloy steels (ISO 2566-1:1984)
ISO 8493:1998 Metallic materials Tube Drift-expanding test
EN ISO 3166-1:2014 Codes for the representation of names of countries and their subdivisions - Part 1: Country codes (ISO 3166-1:2013)
EN ISO 14732:2013 Welding personnel - Qualification testing of welding operators and weld setters for mechanized and automatic welding of metallic materials (ISO 14732:2013)
EN ISO 10893-8:2011 Non-destructive testing of steel tubes - Part 8: Automated ultrasonic testing of seamless and welded steel tubes for the detection of laminar imperfections (ISO 10893-8:2011)
ISO 5173:2009 Destructive tests on welds in metallic materials — Bend tests
EN ISO 9712:2012 Non-destructive testing - Qualification and certification of NDT personnel (ISO 9712:2012)
EN 10028-7:2016 Flat products made of steels for pressure purposes - Part 7: Stainless steels
EN ISO 1127:1996 Stainless steel tubes - Dimensions, tolerances and conventional masses per unit length (ISO 1127:1992)
ISO 148-1:2016 Metallic materials — Charpy pendulum impact test — Part 1: Test method
ISO 5817:2014 Welding — Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) — Quality levels for imperfections
EN ISO 10893-7:2011 Non-destructive testing of steel tubes - Part 7: Digital radiographic testing of the weld seam of welded steel tubes for the detection of imperfections (ISO 10893-7:2011)
EN 10217-7:2014 Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes
ISO 15614-1:2017 Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys
EN 13480-3:2017 Metallic industrial piping - Part 3: Design and calculation
EN ISO 10893-4:2011 Non-destructive testing of steel tubes - Part 4: Liquid penetrant inspection of seamless and welded steel tubes for the detection of surface imperfections (ISO 10893-4:2011)
EN 10272:2016 Stainless steel bars for pressure purposes
EN ISO 10893-6:2011 Non-destructive testing of steel tubes - Part 6: Radiographic testing of the weld seam of welded steel tubes for the detection of imperfections (ISO 10893-6:2011)
EN 10222-5:2017 Steel forgings for pressure purposes - Part 5: Martensitic, austenitic and austenitic-ferritic stainless steels
EN 10021:2006 General technical delivery conditions for steel products
EN ISO 10893-2:2011 Non-destructive testing of steel tubes - Part 2: Automated eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections (ISO 10893-2:2011)
ISO 3651-2:1998 Determination of resistance to intergranular corrosion of stainless steels — Part 2: Ferritic,austenitic and ferritic-austenitic (duplex) stainless steels — Corrosion test in media containing sulfuric acid
ISO 2566-1:1984 Steel Conversion of elongation values Part 1: Carbon and low alloy steels
ISO 8495:2013 Metallic materials Tube Ring-expanding test
EN 10204:2004 Metallic products - Types of inspection documents
EN ISO 6892-2:2011 Metallic materials - Tensile testing - Part 2: Method of test at elevated temperature (ISO 6892-2:2011)
EN ISO 3651-2 : 1998 DETERMINATION OF RESISTANCE TO INTERGRANULAR CORROSION OF STAINLESS STEELS - FERRITIC, AUSTENITIC AND FERRITIC-AUSTENITIC (DUPLEX) STAINLESS STEELS - CORROSION TEST IN MEDIA CONTAINING SULFURIC ACID
EN 10027-1:2016 Designation systems for steels - Part 1: Steel names
ISO 3166-1:2013 Codes for the representation of names of countries and their subdivisions Part 1: Country codes
ISO 6892-2:2011 Metallic materials Tensile testing Part 2: Method of test at elevated temperature
EN 10020:2000 Definition and classification of grades of steel
EN ISO 4136:2012 Destructive tests on welds in metallic materials - Transverse tensile test (ISO 4136:2012)
ISO 10893-6:2011 Non-destructive testing of steel tubes Part 6: Radiographic testing of the weld seam of welded steel tubes for the detection of imperfections
ISO 10893-2:2011 Non-destructive testing of steel tubes Part 2: Automated eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections
ISO 4136:2012 Destructive tests on welds in metallic materials Transverse tensile test
ISO 10893-4:2011 Non-destructive testing of steel tubes Part 4: Liquid penetrant inspection of seamless and welded steel tubes for the detection of surface imperfections
EN ISO 148-1:2016 Metallic materials - Charpy pendulum impact test - Part 1: Test method (ISO 148-1:2016)
EN 10266:2003 Steel tubes, fittings and structural hollow sections - Symbols and definitions of terms for use in product standards
EN ISO 9606-1:2017 Qualification testing of welders - Fusion welding - Part 1: Steels (ISO 9606-1:2012 including Cor 1:2012 and Cor 2:2013)
EN 10160:1999 Ultrasonic testing of steel flat product of thickness equal or greater than 6 mm (reflection method)
ISO 10893-7:2011 Non-destructive testing of steel tubes Part 7: Digital radiographic testing of the weld seam of welded steel tubes for the detection of imperfections
ISO 10893-10:2011 Non-destructive testing of steel tubes Part 10: Automated full peripheral ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of longitudinal and/or transverse imperfections
ISO 377:2017 Steel and steel products — Location and preparation of samples and test pieces for mechanical testing
ISO 14284:1996 Steel and iron — Sampling and preparation of samples for the determination of chemical composition
ISO 1127:1992 Stainless steel tubes Dimensions, tolerances and conventional masses per unit length

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Need help?
Call us on 131 242, then click here to start a Screen Sharing session
so we can help right away! Learn more