Name: PREN 12972 : DRAFT 2017
Brand: CEN

TANKS FOR TRANSPORT OF DANGEROUS GOODS - TESTING, INSPECTION AND MARKING OF METALLIC TANKS

Published date

12-01-2013

Publisher

Comite Europeen de Normalisation

European foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions, symbols and abbreviations
4 Inspections and tests
5 Procedures and documentation for inspections and tests
Annex A (informative) - Applicable items of tank
        inspection - Survey Table
Annex B (normative) - Technical data sheet for type approval
Annex C (informative) - Certificate of initial, periodic and
        intermediate inspection and exceptional check
Annex D (informative) - Tank plates for fixed tanks (tank vehicles)
        and demountable tanks for the transport of dangerous goods
Annex E (normative) - Tank plates for tank containers for the
        transport of dangerous goods
Annex F (normative) - Manufacturing tolerances
       (based on EN 13445-4:2014 [14])
Bibliography

Defines testing, inspection and marking for the type approval, initial inspection, periodic inspection, intermediate inspection and exceptional check of metallic tanks (shell and equipment) of fixed tanks (tank vehicles), demountable tanks, rail tank wagons, portable tanks and tank containers for the transport of dangerous goods.

Committee	TC 296
DocumentType	Draft
PublisherName	Comite Europeen de Normalisation
Status	Current

Standards	Relationship
17/30360691 DC : 0	Identical
05/30117503 DC : DRAFT APR 2005	Identical
12/30259217 DC : 0	Identical
17/30360691 DC : DRAFT AUG 2017	Identical

EN 1432:1997	Swap bodies - Swap tanks - Dimensions, requirements, test methods, operation conditions
ISO 17636-1:2013	Non-destructive testing of welds — Radiographic testing — Part 1: X- and gamma-ray techniques with film
EN ISO 6520-1:2007	Welding and allied processes - Classification of geometric imperfections in metallic materials - Part 1: Fusion welding (ISO 6520-1:2007)
ISO 17643:2015	Non-destructive testing of welds Eddy current testing of welds by complex-plane analysis
EN ISO 5817:2014	Welding - Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) - Quality levels for imperfections (ISO 5817:2014)
ISO 9606-4:1999	Approval testing of welders — Fusion welding — Part 4: Nickel and nickel alloys
ISO 6520-1:2007	Welding and allied processes Classification of geometric imperfections in metallic materials Part 1: Fusion welding
EN ISO 3834-2:2005	Quality requirements for fusion welding of metallic materials - Part 2: Comprehensive quality requirements (ISO 3834-2:2005)
ISO 9606-2:2004	Qualification test of welders — Fusion welding — Part 2: Aluminium and aluminium alloys
ISO 11666:2010	Non-destructive testing of welds Ultrasonic testing Acceptance levels
ISO 10042:2005	Welding Arc-welded joints in aluminium and its alloys Quality levels for imperfections
EN ISO 3452-1:2013	Non-destructive testing - Penetrant testing - Part 1: General principles (ISO 3452-1:2013, Corrected version 2014-05-01)
ISO 23277:2015	Non-destructive testing of welds Penetrant testing Acceptance levels
ISO 15614-2:2005	Specification and qualification of welding procedures for metallic materials Welding procedure test Part 2: Arc welding of aluminium and its alloys
ISO 17635:2016	Non-destructive testing of welds — General rules for metallic materials
EN ISO 6520-2:2013	Welding and allied processes - Classification of geometric imperfections in metallic materials - Part 2: Welding with pressure (ISO 6520-2:2013)
EN 12079-1 : 2006	OFFSHORE CONTAINERS AND ASSOCIATED LIFTING SETS - PART 1: OFFSHORE CONTAINERS - DESIGN, MANUFACTURE AND MARKING
EN ISO 5173:2010/A1:2011	DESTRUCTIVE TESTS ON WELDS IN METALLIC MATERIALS - BEND TESTS (ISO 5173:2009)
ISO 14732:2013	Welding personnel Qualification testing of welding operators and weld setters for mechanized and automatic welding of metallic materials
EN 14025:2013+A1:2016	TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - METALLIC PRESSURE TANKS - DESIGN AND CONSTRUCTION
ISO/TR 15608:2017	Welding Guidelines for a metallic materials grouping system
ISO 14731:2006	Welding coordination Tasks and responsibilities
EN ISO 23278 : 2015	NON-DESTRUCTIVE TESTING OF WELDS - MAGNETIC PARTICLE TESTING - ACCEPTANCE LEVELS (ISO 23278:2015)
ISO 9606-1:2012	Qualification testing of welders — Fusion welding — Part 1: Steels
EN ISO 23277:2015	Non-destructive testing of welds - Penetrant testing - Acceptance levels (ISO 23277:2015)
EN ISO 9606-4:1999	Approval testing of welders - Fusion welding - Part 4: Nickel and nickel alloys (ISO 9606-4:1999)
EN ISO 9016:2012	Destructive tests on welds in metallic materials - Impact tests - Test specimen location, notch orientation and examination (ISO 9016:2012)
EN ISO 9015-1:2011	Destructive tests on welds in metallic materials - Hardness testing - Part 1: Hardness test on arc welded joints (ISO 9015-1:2001)
EN ISO 14732:2013	Welding personnel - Qualification testing of welding operators and weld setters for mechanized and automatic welding of metallic materials (ISO 14732:2013)
EN 12493:2013+A1:2014/AC:2015	LPG EQUIPMENT AND ACCESSORIES - WELDED STEEL PRESSURE VESSELS FOR LPG ROAD TANKERS - DESIGN AND MANUFACTURE
ISO 5173:2009	Destructive tests on welds in metallic materials — Bend tests
ISO 23278:2015	Non-destructive testing of welds Magnetic particle testing Acceptance levels
ISO 17640:2017	Non-destructive testing of welds Ultrasonic testing Techniques, testing levels, and assessment
ISO 148-1:2016	Metallic materials — Charpy pendulum impact test — Part 1: Test method
EN ISO 17643 : 2015	NON-DESTRUCTIVE TESTING OF WELDS - EDDY CURRENT EXAMINATION OF WELDS BY COMPLEX PLANE ANALYSIS (ISO 17643:2015)
ISO 5817:2014	Welding — Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) — Quality levels for imperfections
ISO 3452-1:2013	Non-destructive testing Penetrant testing Part 1: General principles
EN 12266-1:2012	Industrial valves - Testing of metallic valves - Part 1: Pressure tests, test procedures and acceptance criteria - Mandatory requirements
ISO 15614-1:2017	Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys
EN 13445-4 : 2014 COR 2017	UNFIRED PRESSURE VESSELS - PART 4: FABRICATION
ISO 15609-1:2004	Specification and qualification of welding procedures for metallic materials Welding procedure specification Part 1: Arc welding
EN ISO 17637:2016	Non-destructive testing of welds - Visual testing of fusion-welded joints (ISO 17637:2016)
EN ISO 17639:2013	Destructive tests on welds in metallic materials - Macroscopic and microscopic examination of welds (ISO 17639:2003)
ISO 3834-2:2005	Quality requirements for fusion welding of metallic materials Part 2: Comprehensive quality requirements
EN ISO 15614-2:2005	Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 2: Arc welding of aluminium and its alloys (ISO 15614-2:2005)
EN ISO 17635:2016	Non-destructive testing of welds - General rules for metallic materials (ISO 17635:2016)
ISO 17636-2:2013	Non-destructive testing of welds — Radiographic testing — Part 2: X- and gamma-ray techniques with digital detectors
ISO 1496-3:1995	Series 1 freight containers Specification and testing Part 3: Tank containers for liquids, gases and pressurized dry bulk
EN ISO 9606-2:2004	Qualification test of welders - Fusion welding - Part 2: Aluminium and aluminium alloys (ISO 9606-2:2004)
UIC 591 : 3ED 2007	ROLLER UNITS FOR HORIZONTAL TRANSSHIPMENT - TECHNICAL CONDITIONS GOVERNING THEIR USE IN INTERNATIONAL TRAFFIC
ISO 17639:2003	Destructive tests on welds in metallic materials Macroscopic and microscopic examination of welds
EN ISO 14731:2006	Welding coordination - Tasks and responsibilities (ISO 14731:2006)
CEN ISO/TR 15608:2017	Welding - Guidelines for a metallic materials grouping system (ISO/TR 15608:2017)
ISO 17637:2016	Non-destructive testing of welds Visual testing of fusion-welded joints
EN ISO 15609-1:2004	Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 1: Arc welding (ISO 15609-1:2004)
EN ISO 17636-2:2013	Non-destructive testing of welds - Radiographic testing - Part 2: X- and gamma-ray techniques with digital detectors (ISO 17636-2:2013)
EN 13094:2015	Tanks for the transport of dangerous goods - Metallic tanks with a working pressure not exceeding 0,5 bar - Design and construction
ISO 6520-2:2013	Welding and allied processes — Classification of geometric imperfections in metallic materials — Part 2: Welding with pressure
EN ISO 4136:2012	Destructive tests on welds in metallic materials - Transverse tensile test (ISO 4136:2012)
ISO 9016:2012	Destructive tests on welds in metallic materials Impact tests Test specimen location, notch orientation and examination
ISO 4136:2012	Destructive tests on welds in metallic materials Transverse tensile test
EN ISO 148-1:2016	Metallic materials - Charpy pendulum impact test - Part 1: Test method (ISO 148-1:2016)
EN 837-1:1996/AC:1998	PRESSURE GAUGES - BOURDON TUBE PRESSURE GAUGES - DIMENSIONS, METROLOGY, REQUIREMENTS AND TESTING
EN 837-2:1997	Pressure gauges - Part 2: Selection and installation recommendations for pressure gauges
ISO 15607:2003	Specification and qualification of welding procedures for metallic materials General rules
EN ISO 17636-1:2013	Non-destructive testing of welds - Radiographic testing - Part 1: X- and gamma-ray techniques with film (ISO 17636-1:2013)
EN ISO 9606-1:2017	Qualification testing of welders - Fusion welding - Part 1: Steels (ISO 9606-1:2012 including Cor 1:2012 and Cor 2:2013)
EN ISO 17638:2016	Non-destructive testing of welds - Magnetic particle testing (ISO 17638:2016)
EN 837-3:1996	Pressure gauges - Part 3: Diaphragm and capsule pressure gauges - Dimensions, metrology, requirements and testing
ISO 9015-1:2001	Destructive tests on welds in metallic materials Hardness testing Part 1: Hardness test on arc welded joints
EN 14564:2013	Tanks for transport of dangerous goods - Terminology
ISO 17638:2016	Non-destructive testing of welds Magnetic particle testing
UIC 592-4 : 3ED 2007	SWAP BODIES FOR GRAB HANDLING AND SPREADER GRIPPING - TECHNICAL CONDITIONS
EN ISO 15607:2003	Specification and qualification of welding procedures for metallic materials - General rules (ISO 15607:2003)
EN ISO 9606-3 : 1999	Approval testing of welders - Fusion welding - Part 3: Copper and copper alloys (ISO 9606-3:1999)
ISO 9606-3:1999	Approval testing of welders — Fusion welding — Part 3: Copper and copper alloys