CEN/TS 1317-8:2012
|
Road restraint systems - Part 8: Motorcycle road restraint systems which reduce the impact severity of motorcyclist collisions with safety barriers
|
EN 12390-3:2009/AC:2011
|
TESTING HARDENED CONCRETE - PART 3: COMPRESSIVE STRENGTH OF TEST SPECIMENS
|
EN 1194:1999
|
Timber structures - Glued laminated timber - Strength classes and determination of characteristic values
|
EN 13183-1:2002/AC:2003
|
MOISTURE CONTENT OF A PIECE OF SAWN TIMBER - DETERMINATION BY OVEN DRY METHOD
|
EN 335-2:2006
|
Durability of wood and wood-based products - Definition of use classes - Part 2: Application to solid wood
|
EN 10051:2010
|
Continuously hot-rolled strip and plate/sheet cut from wide strip of non-alloy and alloy steels - Tolerances on dimensions and shape
|
EN ISO 180:2000/A2:2013
|
PLASTICS - DETERMINATION OF IZOD IMPACT STRENGTH (ISO 180:2000/AMD 2:2013)
|
CEN/TR 1317-6 : 2012
|
ROAD RESTRAINT SYSTEMS - PART 6: PEDESTRIAN RESTRAINT SYSTEM - PEDESTRIAN PARAPETS
|
EN ISO 1461:2009
|
Hot dip galvanized coatings on fabricated iron and steel articles - Specifications and test methods (ISO 1461:2009)
|
EN 485-2:2016
|
ALUMINIUM AND ALUMINIUM ALLOYS - SHEET, STRIP AND PLATE - PART 2: MECHANICAL PROPERTIES
|
EN 1317-3:2010
|
Road restraint systems - Part 3: Performance classes, impact test acceptance criteria and test methods for crash cushions
|
EN 13036-4:2011
|
Road and airfield surface characteristics - Test methods - Part 4: Method for measurement of slip/skid resistance of a surface: The pendulum test
|
PREN 1317-4 : DRAFT 2012
|
ROAD RESTRAINT SYSTEMS - PART 4: PERFORMANCE CLASSES, IMPACT TEST ACCEPTANCE CRITERIA AND TEST METHODS FOR TRANSITIONS AND REMOVABLE BARRIER SECTIONS
|
EN 10025:1990/A1:1993
|
HOT ROLLED PRODUCTS OF NON-ALLOY STRUCTURAL STEELS - TECHNICAL DELIVERY CONDITIONS
|
EN 10346:2015
|
Continuously hot-dip coated steel flat products for cold forming - Technical delivery conditions
|
ISO 1461:2009
|
Hot dip galvanized coatings on fabricated iron and steel articles — Specifications and test methods
|
EN 10080:2005
|
Steel for the reinforcement of concrete - Weldable reinforcing steel - General
|
EN 933-2:1995
|
Tests for geometrical properties of aggregates - Part 2: Determination of particle size distribution - Test sieves, nominal size of apterures
|
ISO 8349:2002
|
Road vehicles — Measurement of road surface friction
|
EN 933-1:2012
|
Tests for geometrical properties of aggregates - Part 1: Determination of particle size distribution - Sieving method
|
EN ISO 9001:2015
|
Quality management systems - Requirements (ISO 9001:2015)
|
EN 1317-2 : 1998
|
ROAD RESTRAINT SYSTEMS - PART 2: PERFORMANCE CLASSES, IMPACT TEST ACCEPTANCE CRITERIA AND TEST METHODS FOR SAFETY BARRIERS INCLUDING VEHICLE PARAPETS
|
EN ISO 179 : 1996
|
PLASTICS - DETERMINATION OF CHARPY IMPACT STRENGTH
|
EN ISO 14713-1:2017
|
Zinc coatings - Guidelines and recommendations for the protection against corrosion of iron and steel in structures - Part 1: General principles of design and corrosion resistance (ISO 14713-1:2017)
|
EN 10204:2004
|
Metallic products - Types of inspection documents
|
ISO 9001:2015
|
Quality management systems — Requirements
|
EN 338:2016
|
Structural timber - Strength classes
|
EN 206-1:2000/A2:2005
|
CONCRETE - PART 1: SPECIFICATION, PERFORMANCE, PRODUCTION AND CONFORMITY
|
EN ISO 10684:2004/AC:2009
|
Fasteners - Hot dip galvanized coatings (ISO 10684:2004/Cor 1:2008)
|
EN 12390-6:2009
|
Testing hardened concrete - Part 6: Tensile splitting strength of test specimens
|
EN 1992-1-1:2004/A1:2014
|
EUROCODE 2: DESIGN OF CONCRETE STRUCTURES - PART 1-1: GENERAL RULES AND RULES FOR BUILDINGS
|
EN 335-1:2006
|
Durability of wood and wood- based products - Definition of use classes - Part 1: General
|
PREN 1317-7 : DRAFT 2012
|
ROAD RESTRAINT SYSTEMS - PART 7: PERFORMANCE CLASSES, IMPACT TEST ACCEPTANCE CRITERIA AND TEST METHODS FOR TERMINALS OF SAFETY BARRIERS
|
EN 1317-1:2010
|
Road restraint systems - Part 1: Terminology and general criteria for test methods
|