PREN 3155-083 : DRAFT 2018 COR 18
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
26-12-2023
06-05-2014
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Required characteristics
5 Designation
6 Marking
7 Technical specification
Defines the required characteristics, tests and tooling applicable to female electrical contacts, type A, crimp, class S, size 8, used in elements of connection according to EN 3155-002.
DevelopmentNote |
To be read in conjunction with PREN 3155-001. (05/2014)
|
DocumentType |
Draft
|
PublisherName |
Aerospace & Defence Industries Association of Europe
|
Status |
Superseded
|
EN 2591-212:2005 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 212: Surface transfer impedance |
EN 2591-306 : 1998 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 306: MOULD GROWTH |
EN 2591-301 : 1996 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 301: ENDURANCE AT TEMPERATURE |
EN 3155-001:2016 | Aerospace series - Electrical contacts used in elements of connection - Part 001: Technical Specification |
EN 2591-305 : 1997 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 305: RAPID CHANGE OF TEMPERATURE |
EN 2591-319 : 1997 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 319: GASTIGHTNESS OF SOLDERLESS WRAPPED CONNECTIONS |
EN 2591-213 : 1997 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 213: SHIELDING EFFECTIVENESS FROM 100 MHZ TO 1 GHZ |
EN 2591-418 : 2001 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 418: GAUGE INSERTION/EXTRACTION FORCES (FEMALE CONTACTS) |
EN 2591-425 : 2001 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 425: UNWRAPPING CAPABILITY, SOLDERLESS WRAPPED CONNECTIONS |
EN 2591-502 : 2001 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 502: RESTRICTED ENTRY |
EN 2591-316 : 1997 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 316: OZONE RESISTANCE |
EN 2591-315:2015 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 315: Fluid resistance |
EN 2591-220:2005 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 220: Contact/conductor joint ageing by current and temperature cycling |
EN 2591-203 : 1996 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 203: ELECTRICAL CONTINUITY AT MICROVOLT LEVEL |
EN 4165-001:2015/AC:2017 | AEROSPACE SERIES - CONNECTORS, ELECTRICAL, RECTANGULAR, MODULAR - OPERATING TEMPERATURE 175 DEGREES C CONTINUOUS - PART 001: TECHNICAL SPECIFICATION |
EN 2591-201 : 1996 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 201: CONTACT RESISTANCE - LOW LEVEL |
EN 2591-101:1994 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 101: Visual examination |
EN 2591-417 : 2001 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 417: TENSILE STRENGTH (CRIMPED CONNECTION) |
EN 2591-102:1996 | Aerospace series - Elements of electrical and optical connection - Test methods - Part A2: Examination of dimensions and mass |
EN 2083 : 2001 | AEROSPACE SERIES - COPPER AND COPPER ALLOY CONDUCTORS FOR ELECTRICAL CABLES - PRODUCT STANDARD |
EN 2591-424 : 2001 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 424: STRIPPING FORCE, SOLDERLESS WRAPPED CONNECTIONS |
EN 2591-514:2002 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 514: Solderability of contacts with self-contained solder and flux |
EN 2591-406 : 1998 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 406: MECHANICAL ENDURANCE |
SAE AS 22520/23 : 2015 | CRIMP TOOLS, TYPE 1, TERMINAL, HAND OR POWER ACTUATED, WIRE TERMINATION, PNEUMATIC TOOL FOR WIRE BARREL SIZES 0000 THROUGH 8 |
EN 2591-513:2002 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 513: Magnetic permeability |
EN 2591-223:2007 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 223: Measurement of characteristic impedance of a coaxial connector or contact |
EN 2591-204 : 1996 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 204: DISCONTINUITY OF CONTACTS IN THE MICROSECOND RANGE |
ISO 8843:2005 | Aircraft — Crimp-removable contacts for electrical connectors — Identification system |
EN 2591-206 : 1996 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 206: MEASUREMENTS OF INSULATION RESISTANCE |
EN 2591-507:2002 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 507: Plating porosity |
EN 2591-210 : 1998 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 210: ELECTRICAL OVERLOAD |
EN 2591-509:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 509: Adhesion of coating on contacts |
EN 4434:2005 | Aerospace series - Copper or copper alloy lightweight conductors for electrical cables - Product standard (Normal and tight tolerances) |
EN 2591-501:2002 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 501: Soft solderability |
EN 2591-402:2012 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 402: Shock |
EN 2591-503 : 2001 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 503: CONTACT DEFORMATION AFTER CRIMPING |
EN 2591-202 : 1996 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 202: CONTACT RESISTANCE AT RATED CURRENT |
EN 3155-065:2015 | Aerospace series - Electrical contacts used in elements of connection - Part 065: Contacts, electrical, male, type A, crimp, class S, size 8 - Product standard |
EN 2591-221:2007 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 221: Voltage Standing Wave Ratio (VSWR) |
TR 4831 : 2014 | AEROSPACE SERIES - APPLICABLE CRIMPING TOOLS FOR ELECTRICAL CONTACT PRODUCT STANDARDS - EN 3155-065 AND EN 3155-083 |
EN 2591-211:2002 | Aerospaces series - Elements of electrical and optical connection - Test Methods - Part 211: Capacitance |
EN 2591-508:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 508: Measurement of thickness of coating on contacts |
EN 2591-222:2007 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 222: Insertion Loss (I.L.) |
EN 3155-002:2011 | Aerospace series - Electrical contacts used in elements of connection - Part 002: List and utilization of contacts |
SAE AS 22520 : 2011 | CRIMPING TOOLS, WIRE TERMINATION, GENERAL SPECIFICATION FOR |
EN 2591-307:2012 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 307: Salt mist |
EN 2591-207 : 1996 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 207: VOLTAGE PROOF TEST |
EN 2591-416 : 2001 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 416: CONTACT BENDING STRENGTH |
EN 3645-001:2015 | Aerospace series - Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 °C or 200 °C continuous - Part 001: Technical specification |
EN 2591-415 : 2001 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 415: TEST PROBE DAMAGE (FEMALE CONTACTS) |
EN 2591-403:2012 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 403: Sinusoidal and random vibration |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.