Customer Support: 131 242

  • There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

S.R. CEN/TR 1295-3:2007

Current
Current

The latest, up-to-date edition.

STRUCTURAL DESIGN OF BURIED PIPELINES UNDER VARIOUS CONDITIONS OF LOADING - PART 3: COMMON METHOD
Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

01-01-2007

Preview

Foreword
Introduction
1 Scope
2 References
3 Structural design issues
  3.1 Soils
  3.2 Pipe materials
  3.3 Types of loading
4 Principles used in Annex A (Option 1) and Annex B (Option 2)
  4.1 General
  4.2 Principles used in Annex A (Option 1)
  4.3 Principles used in Annex B (Option 2)
5 Synopsis
Annex A Structural design of buried pipelines - Option 1
      A.1 General
      A.2 Terms and definitions
      A.3 Symbols
      A.4 Principle
      A.5 Installation conditions
      A.6 Initial loads
      A.7 Soil parameters
      A.8 Load distributions
      A.9 Loads acting on the pipe
      A.10 Internal pressure
      A.11 Pipe deflection
      A.12 Analysis of bending moments, normal forces,
           stresses and strains
      A.13 Longitudinal effects
      A.14 Stability analysis (only required for flexible pipes)
      A.15 Calculated factors of safety from the design procedure
           and analysis
      A.16 Minimum factors of safety and failure probability
Annex AA Classification of soils
Annex AB Factors of safety and failure probability
Annex AC Soil mechanics background on soil moduli
Annex AD General remarks on stability analyses for buried pipes
Annex AE Finite element analysis
Annex AF Detailed notes relative to longitudinal effects
Annex AG Flowchart and worked examples
Annex B Structural design of buried pipelines - Option 2
      B.1 General
      B.2 Terms and definitions
      B.3 Symbols
      B.4 Principle
      B.5 Pipe parameters
      B.6 Installation conditions and related calculation parameters
      B.7 Stiffness criterion
      B.8 Loadings
      B.9 Load and interaction pressure distributions
      B.10 Buckling
      B.11 Ring deflection
      B.12 Bending moments, axial forces, stresses and strains
      B.13 Verification of safety in use
      B.14 Summary of design procedures and relevant verifications
      B.15 Analysis of longitudinal effects
      B.16 Analysis of seismic action
Annex BA Classification of soils
Annex BB Factors of safety and failure probability
Annex BC Background on soil moduli
Annex BD Rigid, semi-rigid and flexible pipes - A proposal for a
         definition of ranges of system behaviour
Annex BE Background of the Marston method
Annex BF Longitudinal effects - Notes of B.15
Annex BG Worked examples
Annex C Classification of soils
Annex D Factors of safety and failure probability
      D.1 Rudiments of the theory of probabilistic reliability
      D.2 Analysis of reliability of buried piping systems
      D.3 Scatter of parameters
      D.4 Results of the analysis
Annex E Longitudinal effects
      E.1 Longitudinal effects
      E.2 Failure behaviour due to longitudinal effects
      E.3 Failure modes
      E.4 Longitudinal effects
Annex F Detailed notes relative to longitudinal effects
        (according to A.13 and B.15)
Bibliography

Defines calculation methods for the structural design of water supply pipelines, drains and sewers, and other water industry pipelines, whether operating at atmospheric, greater or lesser pressure.

DocumentType
Standard
Pages
208
PublisherName
National Standards Authority of Ireland
Status
Current

Standards Relationship
CEN/TR 1295-3:2007 Identical

DIN 18196:2011-05 Earthworks and foundations - Soil classification for civil engineering purposes
EN 1295-1:1997 Structural design of buried pipelines under various conditions of loading - Part 1: General requirements
NFT 57 105 : 1977 METHODS OF TESTING PLASTICS - GLASS REINFORCED PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES - THREE POINT METHOD
EN 1991-2:2003/AC:2010 EUROCODE 1: ACTIONS ON STRUCTURES - PART 2: TRAFFIC LOADS ON BRIDGES
ATV-DVWK-A 127 : 2000 STANDARDS FOR THE STRUCTURAL CALCULATION OF DRAINS AND SEWERS
EN 805:2000 Water supply - Requirements for systems and components outside buildings
DIN 18127:2012-09 SOIL, INVESTIGATION AND TESTING - PROCTOR-TEST
EN 476:2011 General requirements for components used in drains and sewers
CEN/TR 1295-2:2005 Structural design of buried pipelines under various conditions of loading - Part 2: Summary of nationally established methods of design
NFP 94 110 : 1991 SOLS : RECONNAISSANCE ET ESSAIS - ESSAI PRESSIOMETRIQUE MENARD
EN 1610:2015 Construction and testing of drains and sewers
EN 1998-1:2004/A1:2013 EUROCODE 8: DESIGN OF STRUCTURES FOR EARTHQUAKE RESISTANCE - PART 1: GENERAL RULES, SEISMIC ACTIONS AND RULES FOR BUILDINGS
EN 1998-4:2006 Eurocode 8 - Design of structures for earthquake resistance - Part 4: Silos, tanks and pipelines
ENV 1046:2001 Plastics piping and ducting systems - Systems outside building structures for the conveyance of water or sewage - Practices for installation above and below ground
EN 1998-5 : 2004 EUROCODE 8: DESIGN OF STRUCTURES FOR EARTHQUAKE RESISTANCE - PART 5: FOUNDATIONS, RETAINING STRUCTURES AND GEOTECHNICAL ASPECTS

View more information
$432.47
Including GST where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Need help?
Call us on 131 242, then click here to start a Screen Sharing session
so we can help right away! Learn more