|
EN 12766-1:2000
|
Petroleum products and used oils - Determination of PCBs and related products - Part 1: Separation and determination of selected PCB congeners by gas chromatography (GC) using an electron capture detector (ECD)
|
|
EN 12766-3:2004/AC:2007
|
PETROLEUM PRODUCTS AND USED OILS - DETERMINATION OF PCBS AND RELATED PRODUCTS - PART 3: DETERMINATION AND QUANTIFICATION OF POLYCHLORINATED TERPHENYLS (PCT) AND POLYCHLORINATED BENZYL TOLUENES (PCBT) CONTENT BY GAS CHROMATOGRAPHY (GC) USING AN ELECTRON CAPTURE DETECTOR (ECD)
|
|
ISO 3016:1994
|
Petroleum products Determination of pour point
|
|
ISO 2719:2016
|
Determination of flash point — Pensky-Martens closed cup method
|
|
ISO/IEC 17025:2005
|
General requirements for the competence of testing and calibration laboratories
|
|
EN 60156:1995
|
Insulating liquids - Determination of the breakdown voltage at power frequency - Test method
|
|
EN 60422:2013
|
Mineral insulating oils in electrical equipment - Supervision and maintenance guidance
|
|
IEC 61125:1992
|
Unused hydrocarbon based insulating liquids - Test methods for evaluating the oxidation stability
|
|
ISO 3675:1998
|
Crude petroleum and liquid petroleum products Laboratory determination of density Hydrometer method
|
|
EN ISO 3104:1996
|
Petroleum products - Transparent and opaque liquids - Determination of kinematic viscosity and calculation of dynamic viscosity (ISO 3104:1994)
|
|
IEC 60422:2013
|
Mineral insulating oils in electrical equipment - Supervision and maintenance guidance
|
|
IEC 60156:1995
|
Insulating liquids - Determination of the breakdown voltage at power frequency - Test method
|
|
EN 61125:1993/A1:2004
|
UNUSED HYDROCARBON-BASED INSULATING LIQUIDS - TEST METHODS FOR EVALUATING THE OXIDATION STABILITY
|
|
IEC 60599:2015
|
Mineral oil-filled electrical equipment in service - Guidance on the interpretation of dissolved and free gases analysis
|
|
EN ISO 12185:1996
|
Crude petroleum and petroleum products - Determination of density - Oscillating U-tube method (ISO 12185:1996)
|
|
EN 60867:1994
|
Insulating liquids - Specifications for unused liquids based on synthetic aromatic hydrocarbons
|
|
ASTM D 7151 : 2015 : REDLINE
|
Standard Test Method for Determination of Elements in Insulating Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
|
|
EN 61619:1997
|
Insulating liquids - Contamination by polychlorinated biphenyls (PCBs) - Method of determination by capillary column gas chromatography
|
|
EN 61099:2010
|
Insulating liquids - Specifications for unused synthetic organic esters for electrical purposes
|
|
IEC 62535:2008
|
Insulating liquids - Test method for detection of potentially corrosive sulphur in used and unused insulating oil
|
|
IEC 60475:2011
|
Method of sampling insulating liquids
|
|
EN 61203:1994
|
Synthetic organic esters for electrical purposes - Guide for maintenance of transformer esters in equipment
|
|
IEC 60567:2011
|
Oil-filled electrical equipment - Sampling of gases and analysis of free and dissolved gases - Guidance
|
|
IEC 61099:2010
|
Insulating liquids - Specifications for unused synthetic organic esters for electrical purposes
|
|
EN ISO 3675:1998
|
Crude petroleum and liquid petroleum products - Laboratory determination of density - Hydrometer method (ISO 3675:1998)
|
|
EN 61198:1994
|
Mineral insulating oils - Methods for the determination of 2-furfural and related compounds
|
|
EN 60814:1997
|
Insulating liquids - Oil-impregnated paper and pressboard - Determination of water by automatic coulometric Karl Fischer titration
|
|
EN 62535:2009
|
Insulating liquids - Test method for detection of potentially corrosive sulphur in used and unused insulating oil
|
|
IEC 60836:2015
|
Specifications for unused silicone insulating liquids for electrotechnical purposes
|
|
EN 60970:2007/corrigendum:2008
|
INSULATING LIQUIDS - METHODS FOR COUNTING AND SIZING PARTICLES
|
|
IEC 60296:2012 RLV
|
Fluids for electrotechnical applications - Unused mineral insulating oils for transformers and switchgear
|
|
ISO 12185:1996
|
Crude petroleum and petroleum products — Determination of density — Oscillating U-tube method
|
|
EN 60599:2016
|
Mineral oil-filled electrical equipment in service - Guidance on the interpretation of dissolved and free gases analysis
|
|
EN ISO 9001:2015
|
Quality management systems - Requirements (ISO 9001:2015)
|
|
EN 60296:2012
|
Fluids for electrotechnical applications - Unused mineral insulating oils for transformers and switchgear
|
|
EN 60836:2015
|
Specifications for unused silicone insulating liquids for electrotechnical purposes
|
|
EN 60247:2004
|
Insulating liquids - Measurement of relative permittivity, dielectric dissipation factor (tan d) and d.c. resistivity
|
|
IEC 60944:1988
|
Guide for the maintenance of silicone transformer liquids
|
|
IEC 60666:2010
|
Detection and determination of specified additives in mineral insulating oils
|
|
IEC 60867:1993
|
Insulating liquids - Specifications for unused liquids based on synthetic aromatic hydrocarbons
|
|
EN 12766-2:2001
|
Petroleum products and used oils - Determination of PCBs and related products - Part 2: Calculation of polychlorinated biphenyl (PCB) content
|
|
ISO 9001:2015
|
Quality management systems — Requirements
|
|
IEC 60814:1997
|
Insulating liquids - Oil-impregnated paper and pressboard - Determination of water by automatic coulometric Karl Fischer titration
|
|
EN ISO 2719:2016
|
Determination of flash point - Pensky-Martens closed cup method (ISO 2719:2016)
|
|
IEC 60247:2004
|
Insulating liquids - Measurement of relative permittivity, dielectric dissipation factor (tan d) and d.c. resistivity
|
|
EN 50195:1996
|
Code of practice for the safe use of fully enclosed askarel-filled electrical equipment
|
|
ISO 2049:1996
|
Petroleum products Determination of colour (ASTM scale)
|
|
IEC 61619:1997
|
Insulating liquids - Contamination by polychlorinated biphenyls (PCBs) - Method of determination by capillary column gas chromatography
|
|
EN 50225:1996
|
Code of practice for the safe use of fully enclosed oil-filled electrical equipment which may be contaminated with PCBs
|
|
IEC 61198:1993
|
Mineral insulating oils - Methods for the determination of 2-furfural and related compounds
|
|
EN 60567:2011
|
OIL-FILLED ELECTRICAL EQUIPMENT - SAMPLING OF GASES AND ANALYSIS OF FREE AND DISSOLVED GASES - GUIDANCE (IEC 60567:2011)
|
|
EN 60666 : 2010
|
DETECTION AND DETERMINATION OF SPECIFIED ADDITIVES IN MINERAL INSULATING OILS
|
Important note : All end users must be registered with an Account prior to user licenses being assigned.