We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
  • SAE ARP 1917 : 2002

    Superseded A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
    Add to Watchlist
    This Standard has been added successfully to your Watchlist
    Please visit My Watchlist to see all standards that you are watching.
    Please log in or to add this standard to your Watchlist.
    We could not add this standard to your Watchlist.
    Please retry or contact support for assistance.
    We could not add this standard to your Watchlist.
    Please retry or contact support for assistance.
    You have already added this standard to your Watchlist.
    Visit My Watchlist to view the full list.

    CLARIFICATION OF TERMS USED IN AEROSPACE METALS SPECIFICATIONS

    Available format(s): 

    Superseded date:  03-01-2016

    Language(s): 

    Published date:  01-01-2002

    Publisher:  SAE International

    Add to Watchlist

    Sorry this product is not available in your region.

    Add To Cart

    General Product Information - (Show below) - (Hide below)

    Document Type Standard
    Publisher SAE International
    Status Superseded
    Superseded By

    Standards Referenced By This Book - (Show below) - (Hide below)

    SAE AMS 5504 : 2018 STEEL, CORROSION AND HEAT-RESISTANT, SHEET, STRIP, AND PLATE, 12.5CR (410), ANNEALED
    SAE AMS 5702 : 2018 NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 41.5NI - 16CR - 37FE - 2.9CB (NB) - 1.8TI, CONSUMABLE ELECTRODE REMELTED OR VACUUM INDUCTION MELTED, 1750 DEGREES F (954 DEGREES C) SOLUTION HEAT TREATED
    SAE AMS 4403 : 2017 ALUMINUM ALLOY, DIE FORGINGS, 7.5ZN - 1.6CU - 1.5MG - 0.12ZR (7085-T7452), SOLUTION HEAT TREATED, COMPRESSION STRESS-RELIEVED, AND OVERAGED
    SAE AMS 5808 : 2018 STEEL, CORROSION AND HEAT-RESISTANT, WELDING WIRE, 19CR - 13NI - 2.5MO, HIGH FERRITE GRADE, TRACE ELEMENT CONTROLLED
    SAE AMS 6439 : 2016 STEEL SHEET, STRIP, AND PLATE, 1.05CR - 0.55NI - 1.0MO - 0.12V (0.42 - 0.48C) (D6AC), CONSUMABLE ELECTRODE VACUUM MELTED, ANNEALED
    SAE AMS 4955 : 2016 TITANIUM ALLOY, WELDING WIRE 8AL - 1MO - 1V
    SAE AMS 2259 : 2017 CHEMICAL CHECK ANALYSIS LIMITS, WROUGHT LOW-ALLOY AND CARBON STEELS
    SAE AMS 4599 : 2017 ALUMINUM ALLOY, SHEET AND PLATE, 6.3CU - 0.30MN - 0.06TI - 0.10V - 0.18ZR, SOLUTION AND PRECIPITATION HEAT TREATED (2219 -T81/-T851)
    SAE AMS 4035 : 2017 ALUMINUM ALLOY, SHEET AND PLATE, 4.4CU - 1.5MG - 0.60MN (2024-0) ANNEALED; OR WHEN SPECIFIED, 'AS FABRICATED' (2024-F)
    SAE AMS 5697 : 2018 STEEL, CORROSION-RESISTANT, WIRE, 19CR - 9.5NI (304), SOLUTION HEAT TREATED
    SAE AMS 4250 : 2018 ALUMINUM ALLOY, PLATE - 8.1ZN - 2.3MG - 1.0CU - ZR (7449-T7651) SOLUTION HEAT TREATED, STRESS RELIEVED, AND OVERAGED
    SAE AMS 4095 : 2018 ALUMINUM ALLOY, ALCLAD SHEET AND PLATE 6.3CU - 0.30MN - 0.18ZR - 0.10V - 0.06TI ALCLAD 2219-T31; SHEET, SOLUTION HEAT TREATED AND COLD WORKED ALCLAD 2219-T351; PLATE, SOLUTION HEAT TREATED AND STRESS RELIEVED
    SAE AMS 4040 : 2018 ALUMINUM ALLOY, SHEET AND PLATE, ALCLAD 4.4CU - 1.5MG - 0.60MN (2024-O WITH 1-1/2% ALCLAD); ANNEALED
    SAE AMS 4163 : 2017 ALUMINUM ALLOY, EXTRUSIONS 6.3CU - 0.30MN - 0.18ZR - 0.10V - 0.06TI (2219-T3511) SOLUTION HEAT TREATED, STRESS-RELIEVED BY STRETCHING, AND STRAIGHTENED
    SAE AMS 6950 : 2017 TITANIUM ALLOY BARS, FORGINGS, AND FORGING STOCK 4AL - 2.5V - 1.5 FE SINGLE HEARTH MELTED, ANNEALED
    SAE AMS 3050/7 : 2017 PERFORMANCE SPECIFICATION ANTI-SEIZE THREAD COMPOUND, HIGH TEMPERATURE - 'COPPER+GRAPHITE+ALUMINUM' ONLY
    SAE AMS 4472 : 2017 ALUMINUM ALLOY, PLATE, 4.0CU - 1.0LI - 0.40MG - 0.35AG - 0.13ZR (2195-T34), SOLUTION HEAT TREATED AND STRESS RELIEVED
    SAE AMS 4909 : 2016 TITANIUM ALLOY, SHEET, STRIP, AND PLATE 5AL - 2.5SN, EXTRA LOW INTERSTITIAL ANNEALED
    SAE AMS 4249B : 2012 (R2018) ALUMINUM ALLOY CASTINGS 7.0SI - 0.58MG - 0.15TI - 0.06BE (D357.0-T6) SOLUTION AND PRECIPITATION HEAT TREATED (REQUIRING FATIGUE AND FRACTURE TOUGHNESS TESTING)
    SAE AMS 4916L : 2017 TITANIUM ALLOY SHEET, STRIP, AND PLATE 8AL - 1MO - 1V DUPLEX ANNEALED
    SAE AMS 6276 : 2016 STEEL, BARS, FORGINGS, AND TUBING, 0.50CR - 0.55NI - 0.20MO (0.18 - 0.23C) (SAE 8620), CONSUMABLE ELECTRODE VACUUM REMELTED
    SAE AMS 3050/3 : 2017 PERFORMANCE SPECIFICATION ANTI-SEIZE THREAD COMPOUND, HIGH TEMPERATURE - NICKEL ONLY
    SAE AMS6450K : 2017 STEEL, SPRING WIRE 0.95CR - 0.22V (0.48 - 0.53C) (SAE 6150) ANNEALED AND COLD DRAWN
    SAE AMS 7735 : 2018 ALLOY WIRE, ROUND, 35PD - 30AG - 14CU - 10AU - 10PT - 0.85ZN, SOLUTION HEAT TREATED
    SAE AMS 4338 : 2007 ALUMINUM ALLOY, EXTRUSIONS, 4.0CU - 1.3MG - 0.60MN (2026-T3511), SOLUTION HEAT TREATED AND STRESS RELIEVED BY STRETCHING
    SAE AMS 5441 : 2016 NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, NI - 18CR - 2.8MO - 5.5CB(NB) - 0.70TI - 1.50AL - 10FE - 9CO - 1W, CONSUMABLE ELECTRODE REMELTED OR VACUUM INDUCTION MELTED, 1775 DEGREES F (968 DEGREES C) SOLUTION HEAT TREATED, PRECIPITATION-HARDENABLE
    SAE AMS 6526 : 2016 STEEL, BARS, FORGINGS, TUBING, AND RINGS, 1.0CR - 7.5NI - 4.5CO - 1.0MO - 0.09V (0.29 - 0.34C), CONSUMABLE ELECTRODE VACUUM REMELTED, ANNEALED
    SAE AMS 4940 : 2017 TITANIUM SHEET, STRIP, AND PLATE COMMERCIALLY PURE ANNEALED, 25.0 KSI (172 MPA) YIELD STRENGTH
    SAE AMS 4342 : 2018 ALUMINUM ALLOY, EXTRUSIONS, 6.2ZN - 2.3CU - 2.2MG - 0.12ZR (7050-T74511), SOLUTION HEAT TREATED, STRESS RELIEVED, STRAIGHTENED, AND OVERAGED
    SAE AMS 4078 : 2011 ALUMINUM ALLOY SHEET AND PLATE, 5.6ZN - 2.5MG - 1.6CU - 0.23CR, 7075: (-T73 SHEET, -T7351 PLATE), SOLUTION HEAT TREATED AND OVERAGED
    SAE AMS 4939C : 2017 TITANIUM ALLOY SHEET, STRIP, AND PLATE, 3AL - 8V - 6CR - 4MO - 4ZR, SOLUTION HEAT TREATED
    SAE AMS 4458 : 2016 ALUMINUM ALLOY, PLATE (2.7 CU - 1.8 LI - 0.7 ZN) 2099-T86, SOLUTION HEAT TREATED, COLD WORKED AND ARTIFICIALLY AGED
    SAE AMS 5780 : 2018 STEEL, CORROSION AND HEAT-RESISTANT, WELDING WIRE, 15.5CR - 4.5NI - 2.9MO - 0.10N
    SAE AMS 6280 : 2017 STEEL BARS, FORGINGS, AND RINGS, 0.50CR - 0.55NI - 0.20MO (0.28 - 0.33C) (SAE 8630)
    SAE AMS 2434 : 2017 PLATING, TIN-ZINC ALLOY
    SAE AMS 4315 : 2017 ALUMINUM ALLOY SHEET AND PLATE, 5.6ZN - 2.5MG - 1.6CU - 0.23CR, 7075: (-T76 SHEET, -T7651 PLATE), SOLUTION AND PRECIPITATION HEAT TREATED
    SAE AMS 4992 : 2014 CASTING, STRUCTURAL INVESTMENT, TITANIUM ALLOY 6AL - 4V HOT ISOSTATICALLY PRESSED
    SAE AMS 4372 : 2018 ALUMINUM ALLOY, PLATE, 3.5CU - 1.0LI - 0.40MG - 0.35MN - 0.45AG - 0.12ZR (2050-T34), SOLUTION HEAT TREATED AND STRESS RELIEVED
    SAE AMS 4970 : 2016 TITANIUM ALLOY BARS, WIRE, AND FORGINGS 7AL - 4MO SOLUTION AND PRECIPITATION HEAT TREATED
    SAE AMS 4574F : 2017 NICKEL-COPPER ALLOY, CORROSION RESISTANT, TUBING, SEAMLESS 67NI - 31CU ANNEALED
    SAE AMS 4368 : 2017 ALUMINUM ALLOY, DISCONTINUOUSLY REINFORCED HOT ISOSTATICALLY PRESSED SHAPES 6061B/SIC/40P (3[MU]M) (T1P)
    SAE AMS 5596 : 2017 NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, SHEET, STRIP, FOIL AND PLATE, 52.5NI - 19CR - 3.0MO - 5.1CB (NB) - 0.90TI - 0.50AL - 18FE, CONSUMABLE ELECTRODE REMELTED OR VACUUM INDUCTION MELTED, 1775 DEGREES F (968 DEGREES C) SOLUTION HEAT TREATED
    SAE AMS 4211 : 2012 ALUMINUM ALLOY, PLATE, 6.2ZN - 1.9CU - 2.1MG - 0.10ZR (7040-T7451) SOLUTION HEAT TREATED, STRESS RELIEVED, AND OVERAGED
    SAE AMS 5597 : 2016 NICKEL ALLOY, CORROSION AND HEAT RESISTANT, SHEET, STRIP, AND PLATE, 52.5NI - 19CR - 3.0MO - 5.1CB (NB) - 0.90TI - 0.50AL - 18FE, CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED, 1950 DEGREES F (1066 DEGREES C) SOLUTION HEAT TREATED
    SAE AMS 6260S : 2016 STEEL, BARS, FORGINGS, AND TUBING, 1.2CR - 3.2NI - 0.12MO (0.07 - 0.13C) (9310)
    SAE AMS 4194 : 2018 ALUMINUM ALLOY, SHEET AND PLATE, ALCLAD 4.4CU - 1.5MG - 0.60MN (2024 -T361 SHEET/PLATE WITH 1-1/2% ALCLAD) SOLUTION HEAT TREATED, 6% COLD WORKED AND NATURALLY AGED
    SAE AMS 6953 : 2018 TITANIUM ALLOY SHEET, 6AL - 4SN - 3NB - 0.5MO - 0.3SI, DUPLEX ANNEALED
    SAE AMS 4477 : 2017 ALUMINUM ALLOY, COILED SHEET, 4.4CU - 1.5MG - 0.60MN (2024-T4), SOLUTION TREATED
    SAE AMS 5843 : 2016 COBALT-NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS 19CR - 36CO - 25NI - 7.0MO - 0.50CB (NB) - 2.9TI - 0.20AL - 9.0FE VACUUM INDUCTION PLUS VACUUM CONSUMABLE ELECTRODE MELTED SOLUTION HEAT TREATED, WORK STRENGTHENED, AND AGED
    SAE AMS 6327L : 2017 STEEL BARS AND FORGINGS, 0.50CR - 0.55NI - 0.25MO (0.38 - 0.43C) (SAE 8740), HEAT TREATED, 125 KSI (862 MPA) TENSILE STRENGTH (COMPOSITION SIMILAR TO UNS G87400)
    SAE AMS 4928W : 2017 TITANIUM ALLOY BARS, WIRE, FORGINGS, RINGS, AND DRAWN SHAPES, 6AL - 4V, ANNEALED
    SAE AS 6279 : 2016 STANDARD PRACTICE FOR PRODUCTION, DISTRIBUTION, AND PROCUREMENT OF METAL STOCK
    SAE AMS 4352J : 2017 MAGNESIUM ALLOY, EXTRUSIONS, 5.5ZN - 0.45ZR (ZK60A - T5), PRECIPITATION HEAT TREATED
    SAE AMS 6512 H : 2017 STEEL, MARAGING, BARS, FORGINGS, TUBING, AND RINGS 18NI - 7.8CO - 4.9MO - 0.40TI - 0.10AL CONSUMABLE ELECTRODE VACUUM MELTED, ANNEALED
    SAE AMS 4633 : 2018 BRONZE, ALUMINUM SILICON, RODS, BARS, AND FORGINGS 90CU - 7.0AL - 1.8SI DRAWN AND STRESS RELIEVED (HR50)
    SAE AMS 6308 : 2012 STEEL, BARS AND FORGINGS, 0.90SI - 1.0CR - 2.0NI - 3.2MO - 2.0CU - 0.10V (0.07 - 0.13C), VACUUM ARC OR ELECTROSLAG REMELTED
    SAE AMS 7875 : 2017 POWDER, CHROMIUM CARBIDE PLUS NICKEL-CHROMIUM ALLOY, 75CR[2]C[3] + 25 (80NI - 20CR ALLOY)
    SAE AMS 6408 : 2018 STEEL, HOTWORK TOOL, BARS AND FORGINGS, 5.25CR - 1.5MO - 1.0V (0.35-0.45C) (H-13), ELECTROSLAG REMELTED (ESR) OR CONSUMABLE ELECTRODE VACUUM ARC REMELTED (VAR), ANNEALED
    SAE AMS 4269 : 2017 ALUMINUM ALLOY, SHEET AND PLATE, 4.4CU - 1.5MG - 0.60MN; (2024-T361), SOLUTION HEAT TREATED AND COLD WORKED
    SAE AMS 4341 : 2011 ALUMINUM ALLOY, EXTRUSIONS, 6.2ZN - 2.3CU - 2.2MG - 0.12ZR (7050-T73511), SOLUTION HEAT TREATED, STRESS RELIEVED BY STRETCHING, STRAIGHTENED, AND OVERAGED
    SAE AMS 6352 : 2013 STEEL SHEET, STRIP, AND PLATE, 0.95CR - 0.20MO (0.33 - 0.38C) (SAE 4135)
    SAE AMS 4905 : 2017 TITANIUM ALLOY, DAMAGE-TOLERANT GRADE PLATE, 6AL - 4V, BETA ANNEALED
    SAE AMS 5553 : 2018 NICKEL, SHEET AND STRIP, LOW (0.02 MAX) CARBON, ANNEALED
    SAE AMS 4044 : 2017 ALUMINUM ALLOY, SHEET AND PLATE, 5.6ZN - 2.5MG - 1.6CU - 0.23CR, ANNEALED (7075-O), OR WHEN SPECIFIED, 'AS FABRICATED' (7075-F)
    SAE AMS 2647F : 2017 FLUORESCENT PENETRANT INSPECTION, AIRCRAFT AND ENGINE COMPONENT MAINTENANCE
    SAE AMS 6304 : 2016 LOW-ALLOY STEEL, HEAT-RESISTANT, BARS, FORGINGS, AND TUBING, 0.95CR - 0.55MO - 0.30V (0.40 - 0.50C)
    SAE AMS 5442 : 2017 NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, NI - 18CR - 2.8MO - 5.5CB(NB) - 0.70TI - 1.50AL - 10FE - 9CO - 1W, CONSUMABLE ELECTRODE REMELTED OR VACUUM INDUCTION MELTED, 1775 DEGREES F (968 DEGREES C) SOLUTION AND PRECIPITATION HEAT TREATED
    SAE AMS 5824F : 2017 STEEL, CORROSION-RESISTANT, WELDING WIRE 17CR - 7.1NI - 1.0AL
    SAE AMS 6548 : 2013 STEEL BARS, FORGINGS, AND TUBING, 1.0CR - 3.2NI - 0.2MO (0.12 - 0.17C), PREMIUM AIRCRAFT-QUALITY, ELECTROSLAG REMELTED OR CONSUMABLE ELECTRODE VACUUM REMELTED
    SAE AMS 6409E : 2016 STEEL, BARS, FORGINGS, AND TUBING 0.80CR - 1.8NI - 0.25MO (0.38 - 0.43C) (SAE 4340) SPECIAL AIRCRAFT QUALITY CLEANLINESS, NORMALIZED AND TEMPERED
    SAE AMS 5336 : 2017 STEEL, INVESTMENT CASTINGS, 0.95CR - 0.20MO (0.25 - 0.35C) (4130 MOD) NORMALIZED OR NORMALIZED AND TEMPERED
    SAE AMS 5639 : 2017 STEEL, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, MECHANICAL TUBING, AND RINGS, 19CR - 10NI, SOLUTION HEAT TREATED
    SAE AMS 4967 : 2014 TITANIUM ALLOY, BARS, WIRE, FORGINGS, AND RINGS 6.0AL - 4.0V ANNEALED, HEAT TREATABLE
    SAE AMS 6430J : 2017 STEEL, BARS, FORGINGS, TUBING, AND RINGS, 0.75MN - 0.78CR - 1.8NI - 0.35MO - 0.20V (0.32 - 0.38C), (4335 MODIFIED)
    SAE AMS 6372 : 2017 STEEL, MECHANICAL TUBING, 0.95CR - 0.20MO (0.33 - 0.38C) (SAE 4135)
    SAE AMS 4206 : 2017 ALUMINUM ALLOY, PLATE (7055-T7751), 8.0ZN - 2.3CU - 2.0MG - 0.16ZR, SOLUTION HEAT TREATED, STRESS RELIEVED, AND OVERAGED
    SAE AMS 4343 : 2012 ALUMINUM ALLOY, EXTRUSIONS, 7.7ZN - 2.4MG - 1.6CU - 0.16CR, (7149-T73511) SOLUTION HEAT TREATED, STRESS RELIEVED BY STRETCHING, AND OVERAGED
    SAE AMS 4951 : 2017 TITANIUM WELDING WIRE COMMERCIALLY PURE ENVIRONMENT CONTROLLED PACKAGING
    SAE AMS 6320 : 2017 STEEL BARS, FORGINGS, AND RINGS 0.50CR - 0.55NI - 0.25MO (0.33 - 0.38C) (8735)
    SAE AMS 6484 : 2016 STEEL, BARS, FORGINGS, AND TUBING 0.80CR - 1.8NI - 0.25MO (0.38 - 0.43C) (SAE 4340) NORMALIZED AND TEMPERED
    SAE AMS 4978 : 2018 TITANIUM ALLOY BARS, WIRE, FORGINGS, AND RINGS, 6AL - 6V - 2SN, ANNEALED
    SAE AMS 4296 : 2017 ALUMINUM ALLOY, ALCLAD SHEET AND PLATE 4.3CU - 1.4MG - 0.60MN (ALCLAD 2524-T3) SOLUTION HEAT TREATED AND COLD WORKED
    SAE AMS 6330 : 2017 STEEL BARS, FORGINGS, AND TUBING, 0.65CR - 1.25NI (0.33 - 0.38C)
    SAE AMS 4245 : 2017 ALUMINUM ALLOY, WELDING WIRE, 5.0SI - 1.2CU - 0.50MG (C355.0)
    SAE AMS 5811 : 2012 STEEL, CORROSION AND HEAT RESISTANT, WELDING WIRE, 15CR - 30NI - 1.2MO - 2.2TI - 0.25AL - 0.001B - 0.030V (0.01 - 0.03C), VACUUM INDUCTION MELTED, ENVIRONMENT CONTROLLED PACKAGING
    SAE AMS 4071 : 2017 ALUMINUM ALLOY, DRAWN, ROUND, SEAMLESS HYDRAULIC TUBING, 2.5MG - 0.25CR (5052-O), ANNEALED
    SAE AMS 4730 : 2017 NICKEL-COPPER ALLOY WIRE, CORROSION-RESISTANT, 67NI - 31CU ANNEALED (400)
    SAE AMS5659S : 2016 Steel, Corrosion-Resistant, Bars, Wire, Forgings, Rings, and Extrusions 15Cr - 4.5Ni - 0.30Cb (Nb) - 3.5Cu
    SAE AMS 4954 : 2017 TITANIUM ALLOY, WELDING WIRE 6AL - 4V
    SAE AMS 1424/2 : 2016 DEICING/ANTI-ICING FLUID, AIRCRAFT SAE TYPE 1 NON-GLYCOL BASED
    SAE AMS 5930 : 2017 STEEL, CORROSION-RESISTANT, BARS AND FORGINGS 13.0CR - 2.5NI - 5.5CO - 2.0MO - 0.60V (0.05 - 0.09C) VACUUM INDUCTION PLUS VACUUM CONSUMABLE ELECTRODE MELTED
    SAE AMS 4285 : 2017 ALUMINUM ALLOY CASTINGS, CENTRIFUGAL, 7.0SI - 0.30MG (356.0-T6), SOLUTION AND PRECIPITATION HEAT TREATED
    SAE AMS 6952 : 2018 TITANIUM ALLOY, FORGINGS, 5.8AL - 4.0SN - 3.5ZR - 2.8MO - 0.7NB - 0.35SI - 0.06C, SOLUTION AND PRECIPITATION HEAT TREATED
    SAE AMS 1428/2 : 2017 FLUID, AIRCRAFT DEICING/ANTI-ICING, NON-NEWTONIAN (PSEUDOPLASTIC), SAE TYPES 2, 3, AND 4 NON-GLYCOL BASED
    SAE AMS 7498 : 2016 RINGS, FLASH WELDED TITANIUM AND TITANIUM ALLOYS
    SAE AMS 4971L : 2017 TITANIUM ALLOY, BARS, WIRE, FORGINGS, AND RINGS, 6AL - 6V - 2SN, ANNEALED, HEAT TREATABLE
    SAE AMS 5648 : 2016 STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS, 17CR - 12NI - 2.5MO (316), SOLUTION HEAT TREATED
    SAE AMS 4255 : 2012 ALUMINUM ALLOY, CLAD ONE SIDE SHEET - 0.6MG - 0.35SI - 0.28CU (NO. 21 BRAZING SHEET) AS FABRICATED
    SAE AMS 4949 : 2017 TITANIUM, SHEET, LAMINATED, SURFACE BONDED
    SAE AMS 5689 : 2018 STEEL, CORROSION AND HEAT RESISTANT, WIRE 18CR - 10.5NI - 0.40TI (321) SOLUTION HEAT TREATED
    SAE AMS 4299 : 2018 ALUMINUM ALLOY, PLATE (7449-T7951), 8.1ZN - 1.8CU - 2.3MG SOLUTION HEAT TREATED, STRESS RELIEVED, AND OVERAGED
    SAE AMS 5664 : 2017 NICKEL ALLOY, CORROSION AND HEAT RESISTANT, BARS, FORGINGS, AND RINGS, 52.5NI - 19CR - 3.0MO - 5.1CB (NB) - 0.90TI - 0.50AL - 18FE, CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED 1950 DEGREES F (1066 DEGREES C) SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE
    SAE AMS 6455 : 2016 STEEL, SHEET, STRIP, AND PLATE, 0.95CR - 0.22V (0.48 - 0.53C) (SAE 6150)
    SAE AMS 2404 : 2018 PLATING, ELECTROLESS NICKEL
    SAE AMS 3050/5 : 2017 PERFORMANCE SPECIFICATION ANTI-SEIZE THREAD COMPOUND, HIGH TEMPERATURE - PTFE ONLY
    SAE AMS 4979J : 2017 TITANIUM ALLOY, BARS, WIRE, FORGINGS, AND RINGS, 6AL - 6V - 2SN, SOLUTION AND PRECIPITATION HEAT TREATED
    SAE AMS 5663 : 2016 NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS 52.5NI - 19CR - 3.0MO - 5.1CB (NB) - 0.90TI - 0.50AL - 18FE CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED 1775 DEGREES F (968 DEGREES C) SOLUTION AND PRECIPITATION HEAT TREATED
    SAE AMS 4461 : 2012 ALUMINUM ALLOY, SHEET AND PLATE, ALCLAD, 4.4CU - 1.5MG - 0.60MN (ALCLAD 2024-O, SHEET AND PLATE) ANNEALED; OR WHEN SPECIFIED, 'AS FABRICATED' (2024-F)
    SAE AMS 4406 : 2018 ALUMINUM ALLOY, CENTRIFUGAL CASTINGS, 5.6ZN - 2.5MG - 1.6CU - 0.23CR (709.0-T61), HOT ISOSTATICALLY PRESSED, SOLUTION AND PRECIPITATION HEAT TREATED
    SAE AMS 4277 : 2018 ALUMINUM ALLOY, SHEET - 5.6ZN - 2.5MG - 1.6CU - 0.23CR (7075-O) ANNEALED, FINE GRAINED
    SAE AMS 6951 : 2017 TITANIUM ALLOY, SHEET 5AL - 4V - 0.75MO - 0.5FE ANNEALED
    SAE AMS 4339 : 2018 ALUMINUM ALLOY, ROLLED OR COLD FINISHED BARS AND RODS 4.4CU - 1.5MG - 0.60MN (2024-T-851) SOLUTION HEAT TREATED, COLD WORKED, AND ARTIFICIALLY AGED
    SAE AMS 4290 : 2017 ALUMINUM ALLOY, DIE CASTINGS 9.5SI - 0.50MG (360.0-F), AS CAST
    SAE AMS 1428/1 : 2017 FLUID, AIRCRAFT DEICING/ANTI-ICING, NON-NEWTONIAN (PSEUDOPLASTIC), SAE TYPES 2, 3, AND 4 GLYCOL (CONVENTIONAL AND NON-CONVENTIONAL) BASED
    SAE AMS 6527 : 2018 STEEL, BARS AND FORGINGS, 2.0CR - 10NI - 14CO - 1.0MO (0.15 - 0.19C), VACUUM MELTED, NORMALIZED AND OVERAGED
    SAE AMS6328N : 2017 STEEL, BARS, FORGINGS, AND TUBING, 0.50CR - 0.55NI - 0.25MO (0.48 TO 0.53C) (SAE 8750)
    SAE AMS 4676 : 2017 NICKEL-COPPER ALLOY, CORROSION-RESISTANT, BARS AND FORGINGS, 66.5NI - 3.0AL - 0.62TI - 28CU, HOT-FINISHED, PRECIPITATION HARDENABLE
    SAE AMS 5537 : 2017 COBALT ALLOY, CORROSION AND HEAT-RESISTANT, SHEET, STRIP, FOIL, AND PLATE, 52CO - 20CR - 10NI - 15W, SOLUTION HEAT TREATED
    SAE AMS 4002 : 2018 ALUMINUM ALLOY TUBING, SEAMLESS, DRAWN 1.8CU - 1.0MG - 0.8SI - 0.20CR SOLUTION HEAT TREATED, STRESS-RELIEVED BY STRETCHING, AND AGED (2013-T6511)
    SAE AMS 4613 : 2017 ALUMINUM ALLOY, SHEET AND PLATE, 6.3CU - 0.30MN - 0.06TI - 0.10V - 0.18ZR, SOLUTION HEAT TREATED, COLD WORKED (8%) AND PRECIPITATION HEAT TREATED (2219 -T87)
    SAE AMS 4963 : 2016 TITANIUM ALLOY, BARS, WIRE, FORGINGS, AND RINGS, 6.0AL - 4.0V, ANNEALED, HEAT TREATABLE, MODIFIED STRENGTH
    SAE AMS 4956 : 2016 TITANIUM ALLOY WELDING WIRE, 6AL - 4V, EXTRA LOW INTERSTITIAL, ENVIRONMENT CONTROLLED PACKAGING
    SAE AMS 6317K : 2017 STEEL BARS AND FORGINGS, 1.8NI - 0.25MO (0.38 - 0.43C) (4640), HEAT TREATED, 125 KSI (862 MPA) TENSILE STRENGTH
    SAE AMS 2545 : 2017 CONTROLLED PNEUMATIC NEEDLE PEENING, STRAIGHTENING AND FORMING
    SAE AMS 1428 : 2017 FLUID, AIRCRAFT DEICING/ANTI-ICING, NON-NEWTONIAN, (PSEUDOPLASTIC), SAE TYPES 2, 3 AND 4
    SAE AMS 4079 : 2017 ALUMINUM ALLOY, DRAWN, ROUND, SEAMLESS, TUBING, 1.0MG - 0.60SI - 0.28CU - 0.20CR (6061-O), CLOSE TOLERANCE, ANNEALED
    SAE AMS 5898 : 2018 STEEL, CORROSION RESISTANT, BARS, WIRE, AND FORGINGS, 15.2CR - 1.0MO - 0.40N - (0.28 - 0.34C), CONSUMABLE ELECTRODE MELTED UNDER PRESSURE
    SAE AMS 6323 : 2017 STEEL, MECHANICAL TUBING 0.50CR - 0.55NI - 0.25MO (0.38 - 0.43C) (SAE 8740)
    SAE AMS 4612 : 2017 BRASS, NAVAL, BARS AND RODS 60.5CU - 38.5ZN - 0.75SN HARD TEMPER (H04)
    SAE AMS 4193 : 2017 ALUMINUM ALLOY SHEET AND PLATE, 4.4CU - 1.5MG - 0.60MN (2024-T861), SOLUTION HEAT TREATED, COLD WORKED, AND PRECIPITATION HEAT TREATED
    SAE AMS 5085 : 2017 STEEL SHEET, STRIP, AND PLATE, 0.48 - 0.55C (SAE 1050)
    SAE AMS 6551 : 2013 STEEL BARS, FORGINGS AND TUBING 1.75CR - 4.0NI - 0.5MO - (0.35 - 0.40C) PREMIUM AIRCRAFT QUALITY CONSUMABLE ELECTRODE VACUUM REMELTED
    SAE AMS 5629H : 2016 STEEL, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, RINGS, AND EXTRUSIONS, 13CR - 8.0NI - 2.2MO - 1.1AL, VACUUM INDUCTION PLUS CONSUMABLE ELECTRODE MELTED, SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE
    SAE AMS 2631 : 2017 ULTRASONIC INSPECTION, TITANIUM AND TITANIUM ALLOY BAR, BILLET AND PLATE
    SAE AMS 5951 : 2017 NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, SHEET, STRIP, AND PLATE, 57NI - 20CR - 10CO - 8.5MO - 2.1TI - 1.5AL - 0.005B, VACUUM INDUCTION AND CONSUMABLE ELECTRODE MELTED, SOLUTION HEAT TREATED, PRECIPITATION HEAT TREATABLE
    SAE AMS 4490 : 2017 MAGNESIUM ALLOY CASTINGS, DIE, 9.0AL - 0.70ZN (AZ91D, TEMPER F), AS CAST
    SAE AMS 6434 : 2016 STEEL, SHEET, STRIP, AND PLATE, 0.78CR - 1.8NI - 0.35MO - 0.20V (0.33 - 0.38C) (4335 MOD)
    SAE AMS 5647 : 2017 STEEL, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, MECHANICAL TUBING, AND RINGS, 19CR - 9.5NI, SOLUTION HEAT TREATED
    SAE AMS 6274 : 2016 STEEL BARS, FORGINGS AND TUBING, 0.50CR - 0.55NI - 0.20MO (0.18 - 0.23C) (SAE 8620)
    SAE AMS 3050/4 : 2017 PERFORMANCE SPECIFICATION ANTI-SEIZE THREAD COMPOUND, HIGH TEMPERATURE - MOLYBDENUM DISULPHIDE; GRAPHITE ONLY
    SAE AMS5337E : 2017 STEEL, MARAGING, INVESTMENT CASTINGS, 18.5NI - 9.0CO - 5.0MO - 0.70TI - 0.12AL, VACUUM MELTED, HOMOGENIZED, OVERAGED, AND SOLUTION HEAT TREATED
    SAE AMS 4712 : 2017 COPPER ALLOY, WIRE 65CU - 35ZN ANNEALED (O61)
    SAE AMS 4031 : 2017 ALUMINUM ALLOY, SHEET AND PLATE, 6.3CU - 0.30MN - 0.18ZR - 0.10V - 0.06TI (2219-O) ANNEALED OR WHEN SPECIFIED, 'AS FABRICATED' (2219-F)
    SAE AMS 2771 : 2017 HEAT TREATMENT OF ALUMINUM ALLOY CASTINGS
    SAE AMS 4348 : 2018 CORE, HONEYCOMB, ALUMINUM ALLOY, CORROSION INHIBITED FOR SANDWICH CONSTRUCTION 5052, 350 (177)
    SAE AMS 4478 : 2018 ALUMINUM ALLOY, SHEET AND PLATE, ALCLAD, 4.4CU - 1.5MG - 0.60MN (ALCLAD 2024, -T81 SHEET, -T851 PLATE), SOLUTION HEAT TREATED, COLD WORKED AND ARTIFICIALLY AGED
    SAE AMS 5505 : 2018 STEEL, CORROSION AND HEAT RESISTANT, SHEET, STRIP, AND PLATE, 12CR (410 MODIFIED), FERRITE CONTROLLED, ANNEALED
    SAE AMS 4625 : 2016 PHOSPHOR BRONZE BARS, RODS, AND TUBING, 95CU - 5SN, HARD TEMPER
    SAE AMS 4094 : 2018 ALUMINUM ALLOY, SHEET AND PLATE, ALCLAD 6.3CU - 0.30MN - 0.18ZR - 0.10V - 0.06TI ALCLAD 2219-T81 SHEET SOLUTION HEAT TREATED, COLD WORKED, AND PRECIPITATION HEAT TREATED ALCLAD 2219-T851 PLATE SOLUTION HEAT TREATED, STRESS RELIEVED, AND PRECIPITATION HEAT TREATED
    SAE AMS 5338 : 2017 STEEL, INVESTMENT CASTINGS, 0.95CR - 0.20MO (0.35 - 0.45C) (4140 MOD), NORMALIZED OR NORMALIZED AND TEMPERED
    SAE AMS 5046 : 2017 CARBON STEEL, SHEET, STRIP, AND PLATE, (SAE 1020 AND 1025)
    SAE AMS 2418 : 2017 PLATING, COPPER
    SAE AMS 4291 : 2017 ALUMINUM ALLOY, DIE CASTINGS, 8.5SI - 3.5CU (A380.0-F), AS CAST
    SAE AMS 2380 : 2017 APPROVAL AND CONTROL OF PREMIUM-QUALITY TITANIUM ALLOYS
    SAE AMS 6456 : 2017 STEEL, WELDING WIRE, 0.80CR - 1.8NI - 0.25MO (0.35 - 0.40C) (SAE 4340 MOD), VACUUM MELTED, ENVIRONMENT-CONTROLLED PACKAGING
    SAE AMS 4981 : 2017 TITANIUM ALLOY BARS, WIRE, AND FORGINGS, 6.0AL - 2.0SN - 4.0ZR - 6.0MO, SOLUTION AND PRECIPITATION HEAT TREATED
    SAE AMS 6547 : 2013 STEEL BARS, FORGINGS, AND TUBINGS, 1.0CR - 3.2NI - 0.2MO - (0.12 - 0.17C), AIRCRAFT QUALITY
    SAE AMS 4946 : 2016 TITANIUM ALLOY TUBING, SEAMLESS, HYDRAULIC, 3AL - 2.5V, TEXTURE CONTROLLED, COLD WORKED, STRESS RELIEVED
    SAE AMS 4892 : 2017 ALLOY CASTINGS, CORROSION AND HEAT-RESISTANT, 66NI - 29CU - 4.0SI, AS CAST
    SAE AMS 1424 : 2017 FLUID, AIRCRAFT DEICING/ANTI-ICING, SAE TYPE 1
    SAE AMS 4617 : 2017 ALUMINUM ALLOY, EXTRUSIONS, 5.6ZN - 2.5MG - 1.6CU - 0.23CR (7075-T73, 7075-T73511, 7075-T73510), SOLUTION HEAT TREATED, STRESS RELIEVED BY STRETCHING WHEN REQUIRED, AND OVERAGED
    SAE AMS 6411 : 2018 STEEL BARS, FORGINGS, AND TUBING, 0.88CR - 1.8NI - 0.42MO - 0.08V (0.28 - 0.33C) (4330 MOD) CONSUMABLE ELECTRODE REMELTED
    SAE AMS 5604 J: 2018 STEEL, CORROSION RESISTANT, SHEET, STRIP, AND PLATE, 16.5CR - 4.0NI - 4.0CU - 0.30CB, SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE
    SAE AMS 4416 : 2017 ALUMINUM ALLOY, EXTRUDED PROFILES (2196-T8511) 2.9CU - 1.7LI - 0.4MG - 0.4AG - 0.10ZR SOLUTION HEAT TREATED, STRESS RELIEVED BY STRETCHING AND ARTIFICIALLY AGED
    SAE AMS 4276 : 2018 ALUMINUM ALLOY, SHEET - 4.4CU - 1.5MG - 0.60MN (2024-O) ANNEALED, FINE GRAINED
    SAE AMS 4544 H: 2017 NICKEL-COPPER ALLOY, CORROSION RESISTANT, SHEET, STRIP, AND PLATE 67NI - 30CU, ANNEALED
    SAE AMS 4473 : 2017 ALUMINUM ALLOY PLATE (2624-T39), 4.1CU - 1.4MG - 0.6MN, SOLUTION HEAT TREATED, COLD WORKED AND NATURALLY AGED
    SAE AMS 5826 : 2017 STEEL, CORROSION AND HEAT-RESISTANT, WELDING WIRE 15CR - 5.1NI - 0.30CB(NB) - 3.2CU
    SAE AMS 4462 : 2018 ALUMINUM ALLOY, SHEET AND PLATE, ALCLAD, 4.4CU - 1.5MG - 0.60MN (ALCLAD 2024, -T3 SHEET, -T351 PLATE), SOLUTION HEAT TREATED, COLD WORKED AND NATURALLY AGED
    SAE AMS 4015 : 2018 ALUMINUM ALLOY, SHEET AND PLATE 2.5MG - 0.25CR (5052-O) ANNEALED
    SAE AMS 4365 : 2017 ALUMINUM ALLOY, PLATE, 7.9ZN - 1.2CU - 2.1MG - 0.10ZR (7097-T7651) SOLUTION HEAT TREATED, STRESS RELIEVED, AND OVERAGED
    SAE AMS 4345 : 2012 ALUMINUM ALLOY, EXTRUSIONS - 6.4ZN - 2.4MG - 2.2CU - 0.12ZR (7150-T77511) SOLUTION HEAT TREATED, STRESS-RELIEVED, STRAIGHTENED, AND OVERAGED
    SAE AMS 4085 : 2011 ALUMINUM ALLOY SHEET, 5.7ZN - 2.2MG - 1.6CU - 0.22CR (7475-T761), SOLUTION HEAT TREATED AND OVERAGED
    SAE AMS 5599 : 2016 NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, SHEET, STRIP, AND PLATE, 62NI - 21.5CR - 9.0MO - 3.7 CB (NB), ANNEALED
    SAE AMS 6495 : 2016 STEEL BARS, FORGINGS, AND TUBING, 1.0CR - 2.50NI - 2.0MO - 1.10SI (0.10 - 0.20C), PREMIUM AIRCRAFT-QUALITY, ELECTROSLAG REMELTED OR CONSUMABLE ELECTRODE VACUUM REMELTED
    SAE AMS 5712 : 2016 NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 53NI - 19CR - 11CO - 9.8MO - 3.2TI - 1.6AL - 0.006B, VACUUM MELTED, SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE
    SAE AMS 4407 : 2018 ALUMINUM ALLOY, PLATE (7056-T7651), 9.1ZN - 1.6CU - 1.9MG, SOLUTION HEAT TREATED, STRESS RELIEVED, AND OVERAGED
    SAE AMS 6407 : 2017 STEEL, BARS, FORGINGS, AND TUBING, 1.2CR - 2.0NI - 0.45MO (0.27 - 0.33C)
    SAE AMS 4991 : 2014 TITANIUM ALLOY CASTINGS, INVESTMENT 6AL - 4V HOT ISOSTATIC PRESSED, ANNEAL OPTIONAL
    SAE AMS 5773 : 2012 STEEL, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, MECHANICAL TUBING, AND RINGS, 15CR - 6.5NI - 0.75MO - 0.30 CB (NB) - 1.5CU, CONSUMABLE ELECTRODE REMELTED, SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE
    SAE AMS 6265 : 2016 STEEL, BARS, FORGINGS, AND TUBING, 1.2CR - 3.25NI - 0.12MO (0.07 - 0.13C) (9310), VACUUM CONSUMABLE ELECTRODE REMELTED
    SAE AMS 6349 : 2017 STEEL BARS, 0.95CR - 0.20MO (0.38 TO 0.43C) (SAE 4140), NORMALIZED
    SAE AMS 4558 : 2017 BRASS, SEAMLESS TUBING, 66.5CU - 31.5ZN - 1.6PB, DRAWN TEMPER (H58)
    SAE AMS 4915 : 2017 TITANIUM ALLOY SHEET, STRIP, AND PLATE 8AL - 1V - 1MO SINGLE ANNEALED
    SAE AMS4897D : 2016 TITANIUM ALLOY, SHEET AND STRIP, 15MO - 3.0AL - 2.8CB - 0.20SI
    SAE AMS 3050/8 : 2017 PERFORMANCE SPECIFICATION ANTI-SEIZE THREAD COMPOUND, HIGH TEMPERATURE - 'GRAPHITE+ALUMINUM' ONLY
    SAE AMS 4779 : 2018 NICKEL ALLOY, BRAZING FILLER METAL, 94NI - 3.5SI - 1.8B, 1800 DEGREES F (982 DEGREES C) SOLIDUS, 1950 DEGREES F (1066 DEGREES C) LIQUIDUS
    SAE AMS 5608 : 2016 COBALT ALLOY, CORROSION AND HEAT RESISTANT, SHEET, STRIP, AND PLATE, 40CO - 22CR - 22NI - 14.5W - 0.07LA, SOLUTION HEAT TREATED
    SAE AMS 4893 : 2017 ALLOY CASTINGS, CORROSION AND HEAT-RESISTANT, 66NI - 29CU - 4.0SI, SOLUTION TREATED
    SAE AMS 5694 : 2018 STEEL, CORROSION AND HEAT RESISTANT, WELDING WIRE, 27CR - 21.5NI
    SAE AMS 2449 : 2010 GRINDING OF HVOF SPRAYED TUNGSTEN CARBIDE COATINGS APPLIED TO HIGH STRENGTH STEELS
    SAE AMS 4189 : 2016 ALUMINUM ALLOY WELDING WIRE, 4.1SI-0.20 MG (4643)
    SAE AMS 3050/1 : 2017 PERFORMANCE SPECIFICATION ANTI-SEIZE THREAD COMPOUND, HIGH TEMPERATURE - COPPER ONLY
    SAE AMS 5687N : 2018 NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, WIRE, 74NI - 15.5CR - 8.0FE, ANNEALED
    SAE AMS 5703 : 2018 NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 41.5NI - 16CR - 37FE - 2.9CB - 1.8TI, CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED, 1750 DEGREES F (954 DEGREES C) SOLUTION, STABILIZATION, AND PRECIPITATION HEAT TREATED
    SAE AMS 6354 : 2016 STEEL, SHEET, STRIP, AND PLATE, 0.75SI - 0.62CR - 0.20MO - 0.10ZR (0.10 - 0.17C)
    SAE AMS4933F : 2017 TITANIUM ALLOY EXTRUSIONS AND FLASH WELDED RINGS 8AL - 1MO - 1V SOLUTION HEAT TREATED AND STABILIZED
    SAE AMS 6509A : 2017 STEEL BARS AND FORGINGS 3.5CR - 7.5NI - 16.3CO - 1.75MO - 0.2W - (0.09 - 0.13C) DOUBLE VACUUM MELTED, NORMALIZED, ANNEALED
    SAE AMS 4251 : 2017 ALUMINUM ALLOY SHEET, 2.7CU - 2.2LI - 0.12ZR (2090-T83), SOLUTION HEAT TREATED, COLD WORKED, AND PRECIPITATION HEAT TREATED
    SAE AMS 5650 : 2018 STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, MECHANICAL TUBING, AND RINGS, 23CR - 13.5NI (309S), SOLUTION HEAT TREATED
    SAE AMS 6501 : 2017 STEEL, MARAGING, WELDING WIRE, 18NI - 8.0CO - 4.9MO - 0.40TI - 0.10AL, VACUUM INDUCTION MELTED, ENVIRONMENT CONTROLLED PACKAGING
    SAE AMS 5934 : 2016 STEEL, EXTRA HIGH TOUGHNESS, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, RINGS, AND EXTRUSIONS, 13CR - 8.0NI - 2.2MO - 1.1AL, VACUUM INDUCTION PLUS CONSUMABLE ELECTRODE MELTED, SOLUTION HEAT TREATED, PRECIPITATION-HARDENABLE
    SAE AMS 4976 : 2017 TITANIUM ALLOY, FORGINGS, 6.0AL - 2.0SN - 4.0ZR - 2.0MO - 08SI, SOLUTION AND PRECIPITATION HEAT TREATED
    SAE AMS 6539 : 2013 STEEL BARS, FORGINGS, AND TUBING, 1.7CR - 3.8NI - 0.3MO - (0.32-0.38 C), AIRCRAFT-QUALITY
    SAE AMS 4045 : 2016 ALUMINUM ALLOY SHEET AND PLATE 5.6ZN - 2.5MG - 1.6CU - 0.23CR 7075: (-T6 SHEET, -T651 PLATE) SOLUTION AND PRECIPITATION HEAT TREATED
    SAE AMS 5713K : 2016 NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 53NI - 19CR - 11CO - 9.8MO - 3.2TI - 1.6AL - 0.006B, VACUUM MELTED, SOLUTION AND PRECIPITATION HEAT TREATED
    SAE AMS 6463 : 2013 WIRE, STEEL WELDING, 18.5NI - 8.5CO - 5.2MO - 0.72TI - 0.10AL, (MARAGE 300), VACUUM MELTED, ENVIRONMENT CONTROLLED PACKAGING
    SAE AMS 4417 : 2018 CASTINGS, SAND, MAGNESIUM ALLOY, 1.5AG - 2.1DI - 0.08CU - 0.70ZR (EQ21A - T6), SOLUTION AND PRECIPITATION HEAT TREATED
    SAE AMS 4463 : 2017 ALUMINUM ALLOY, PLATE (7255-T7751) 8.0ZN - 2.3CU - 2.0MG - 0.12ZR, SOLUTION HEAT TREATED, STRESS RELIEVED, AND OVERAGED
    SAE AMS 4917 : 2017 TITANIUM ALLOY SHEET, STRIP, AND PLATE 13.5V - 11CR - 3.0AL - SOLUTION HEAT TREATED
    SAE AMS 6415 : 2016 STEEL, BARS, FORGINGS, AND TUBING 0.80CR - 1.8NI - 0.25MO (0.38 - 0.43C) (SAE 4340)
    SAE AMS 4212 : 2016 ALUMINUM ALLOY CASTINGS, 5.0SI - 1.2CU - 0.50MG (355.0-T6), SOLUTION AND PRECIPITATION HEAT TREATED
    SAE AMS 6381 : 2017 STEEL, MECHANICAL TUBING, 0.95CR - 0.20MO (0.38 - 0.43C) (SAE 4140)
    SAE AMS 6414 : 2016 STEEL, BARS, FORGINGS, AND TUBING 0.80CR - 1.8NI - 0.25MO (0.38 - 0.43C) (SAE 4340) VACUUM CONSUMABLE ELECTRODE REMELTED
    SAE AMS 2466 : 2018 HARD ANODIC COATING OF MAGNESIUM ALLOYS
    SAE AMS 4225 : 2018 ALUMINUM ALLOY, HEAT-RESISTANT, CASTINGS, 5.0CU - 1.5NI - 0.25MN - 0.25SB - 0.25CO - 0.20TI - 0.20ZR (203.0-T6), SOLUTION HEAT TREATED AND PRECIPITATION HEAT TREATED
    SAE AMS 4017 : 2018 ALUMINUM ALLOY SHEET AND PLATE, 2.5MG - 0.25CR, (5052-H34), STRAIN-HARDENED, HALF-HARD, AND STABILIZED
    SAE AMS 6305 : 2016 STEEL, HEAT-RESISTANT, BARS, FORGINGS, AND TUBING, 0.95CR - 0.55MO - 0.30V (0.40 - 0.50C), VACUUM ARC REMELTED
    SAE AMS 5846 : 2016 ALLOY, CORROSION AND HEAT-RESISTANT, BARS AND FORGINGS, 53NI - 15CR - 18.5CO - 5.0MO - 3.2TI - 4.2AL - 0.03B, DOUBLE VACUUM MELTED SOLUTION, STABILIZATION, AND PRECIPITATION HEAT TREATED
    SAE AMS 4121 : 2017 ALUMINUM ALLOY BARS, RODS, AND WIRE, ROLLED, DRAWN, OR COLD FINISHED, 4.5CU - 0.85SI - 0.80MN - 0.50MG (2014-T6, -T651), SOLUTION AND PRECIPITATION HEAT TREATED
    SAE AMS 5532 : 2017 IRON ALLOY, CORROSION AND HEAT-RESISTANT, SHEET, STRIP, AND PLATE, 30FE - 21CR - 20NI - 20CO - 3.0MO - 2.5W - 1.0CB(NB) - 0.15N, SOLUTION HEAT TREATED
    SAE AMS4675E : 2017 NICKEL-COPPER ALLOY, CORROSION-RESISTANT, BARS AND FORGINGS, 67NI - 30CU
    SAE AMS 4048 : 2016 ALUMINUM ALLOY SHEET AND PLATE, ALCLAD 5.6ZN - 2.5MG - 1.6CU - 0.23CR (ALCLAD 7075-O) ANNEALED OR WHEN SPECIFIED, 'AS FABRICATED' (ALCLAD 7075-F)
    SAE AMS 5655 : 2016 STEEL, CORROSION AND HEAT RESISTANT, BARS, WIRE, AND FORGINGS 12.5CR - 0.75NI - 1.0MO - 1.0W - 0.24V (0.20-0.25C) HARDENED AND TEMPERED
    SAE AMS 4616 : 2012 SILICON BRONZE BARS, RODS, FORGINGS, AND TUBING 92CU - 3.2SI - 2.8ZN - 1.5FE STRESS RELIEVED
    SAE AMS 5841 : 2016 COBALT-NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS 19CR - 36CO - 25NI - 7.0MO - 0.50CB (NB) - 2.9TI - 0.20AL - 9.0FE VACUUM INDUCTION PLUS VACUUM CONSUMABLE ELECTRODE MELTED SOLUTION HEAT TREATED FOR WORK STRENGTHENING
    SAE AMS 7002 : 2018 PROCESS REQUIREMENTS FOR PRODUCTION OF METAL POWDER FEEDSTOCK FOR USE IN ADDITIVE MANUFACTURING OF AEROSPACE PARTS
    SAE AMS 5517 : 2010 STEEL, CORROSION RESISTANT, SHEET AND STRIP, 18CR - 8NI (301) COLD ROLLED, 125 KSI (862 MPA) TENSILE STRENGTH
    SAE AMS 3050/9 : 2017 PERFORMANCE SPECIFICATION ANTI-SEIZE THREAD COMPOUND, HIGH TEMPERATURE - 'GRAPHITE+CALCIUM FLUORIDE' ONLY
    SAE AMS 4921 : 2016 TITANIUM BARS, WIRE, FORGINGS, AND RINGS COMMERCIALLY PURE, 70 KSI (483 MPA) YIELD STRENGTH
    SAE AMS 1424/1 : 2016 DEICING/ANTI-ICING FLUID, AIRCRAFT SAE TYPE 1 GLYCOL (CONVENTIONAL AND NON-CONVENTIONAL) BASED
    SAE AMS 5350 : 2017 STEEL, CORROSION AND MODERATE HEAT-RESISTANT, INVESTMENT CASTINGS, 12.5CR (410), HARDENED AND TEMPERED
    SAE AMS 4374 : 2016 ALUMINUM ALLOY, EXTRUDED PROFILES, 8.9ZN - 2.2CU - 2.2MG - 0.15ZR (7136-T73511), SOLUTION HEAT TREATED, STRESS RELIEVED BY STRETCHING, STRAIGHTENED, AND OVERAGED
    SAE AMS 6302K : 2017 LOW-ALLOY STEEL, HEAT-RESISTANT, BARS, FORGINGS, AND TUBING, 0.65SI - 1.25CR - 0.50MO - 0.25V (0.28 - 0.33C)
    SAE AMS 4344 : 2011 ALUMINUM ALLOY, EXTRUSIONS, 5.6ZN - 2.5MG - 1.6CU - 0.23CR (7175-T73511), SOLUTION HEAT TREATED, STRESS RELIEVED BY STRETCHING, STRAIGHTENED, AND OVERAGED
    SAE AMS 5402 : 2004 NICKEL ALLOY, CORROSION AND HEAT RESISTANT, INVESTMENT CASTINGS 62NI - 21.5CR - 9.0MO - 3.6CB (NB) AS CAST
    SAE AMS 1435 : 2012 FLUID, GENERIC, DEICING/ANTI-ICING, RUNWAYS AND TAXIWAYS
    SAE AMS 6431 : 2017 STEEL, BARS, FORGINGS, AND TUBING, 1.05CR - 0.55NI - 1.0MO - 0.11V (0.45 - 0.50C) (D6AC), VACUUM CONSUMABLE ELECTRODE REMELTED
    SAE AMS 6514 : 2017 STEEL, MARAGING, BARS, FORGINGS, TUBING, AND RINGS 18.5NI - 9.0CO - 4.9MO - 0.65TI - 0.10AL CONSUMABLE ELECTRODE VACUUM MELTED, ANNEALED
    SAE AMS 6487 : 2016 STEEL, BARS, AND FORGINGS, 5.0CR - 1.3MO - 0.50V (0.38 - 0.43C) (H-11), CONSUMABLE ELECTRODE VACUUM MELTED
    SAE AMS 4677 : 2017 NICKEL-COPPER ALLOY, CORROSION RESISTANT, BARS AND FORGINGS 66.5NI - 2.9AL - 30CU ANNEALED
    SAE AMS 6544 : 2013 STEEL, PLATE, 2.0CR - 10NI - 8.0CO - 1.0MO (0.10 - 0.14C) (HY-180), DOUBLE VACUUM MELTED, SOLUTION HEAT TREATED
    SAE AMS 2370 : 2016 QUALITY ASSURANCE SAMPLING AND TESTING, CARBON AND LOW-ALLOY STEEL WROUGHT PRODUCTS AND FORGING STOCK
    SAE AMS 5906C : 2018 STEEL, CORROSION-RESISTANT, SHEET AND STRIP, 18CR - 9.0NI (SAE 30302), COLD ROLLED, FULL HARD, 185 KSI (1276 MPA) TENSILE STRENGTH
    SAE AMS 4408 : 2018 ALUMINUM ALLOY, PLATE (7140-T7651), 6.6ZN - 1.8CU - 2.0MG - 0.10ZR, SOLUTION HEAT TREATED, STRESS RELIEVED, AND OVERAGED
    SAE AMS 4326 : 2018 ALUMINUM ALLOY, 2013, EXTRUDED BAR, ROD, AND PROFILES, 1.0MG - 0.80SI - 1.8CU - 0.20CR (2013- T6511), SOLUTION HEAT TREATED, STRESS-RELIEVED BY STRETCHING, AND AGED
    SAE AMS 4217 : 2018 ALUMINUM ALLOY, CASTINGS, 7.0SI - 0.32MG (356.0-T6), SOLUTION AND PRECIPITATION HEAT TREATED
    SAE AMS 6557 : 2013 STEEL, BARS, WIRE, AND FORGINGS, 9V - 5.25CR - 1.3MO (1.80 - 1.95C), POWDER METALLURGY PRODUCT, HOT ISOSTATICALLY PRESSED
    SAE AMS 2728 : 2012 HEAT TREATMENT OF WROUGHT COPPER BERYLLIUM ALLOY PARTS
    SAE AMS 5132L : 2017 STEEL, BARS, 0.90 - 1.03C
    SAE AMS 4244 : 2016 ALUMINUM ALLOY, WELDING WIRE, 4.6CU - 0.35MN - 0.25MG - 0.22TI FOR WELDING A206.0 TYPE ALLOYS
    SAE AMS 2368 : 2017 SAMPLING AND TESTING OF WROUGHT TITANIUM RAW MATERIAL EXCEPT FORGINGS AND FORGING STOCK
    SAE AMS 4485A : 2017 MAGNESIUM ALLOY, EXTRUSIONS 4.0Y - 2.25ND - 0.5ZR (WE43C - T5) PRECIPITATION HEAT TREATED
    SAE AMS 3050/2 : 2017 PERFORMANCE SPECIFICATION ANTI-SEIZE THREAD COMPOUND, HIGH TEMPERATURE - ALUMINUM ONLY
    SAE AMS 6523H : 2017 STEEL, SHEET, STRIP, AND PLATE, 0.75CR - 9.0NI - 4.5CO - 1.0MO - 0.09V (0.17 - 0.23C) VACUUM CONSUMABLE ELECTRODE MELTED, ANNEALED
    SAE AMS 6454 : 2011 STEEL, SHEET, STRIP, AND PLATE, 1.8NI - 0.80CR - 0.25MO (0.38 - 0.43C) (SAE 4340) VACUUM CONSUMABLE ELECTRODE REMELTED
    SAE AMS 4174 : 2016 ALUMINUM ALLOY, FLASH WELDED RINGS, 5.6ZN - 2.5MG - 1.6CU - 0.23CR (7075-T73), SOLUTION AND PRECIPITATION HEAT TREATED
    SAE AMS 4123 : 2011 ALUMINUM ALLOY, ROLLED OR COLD FINISHED BARS AND RODS (7075-T651) SOLUTION AND PRECIPITATION HEAT TREATED
    SAE AMS 2371 : 2016 QUALITY ASSURANCE SAMPLING AND TESTING, CORROSION AND HEAT-RESISTANT STEELS AND ALLOYS, WROUGHT PRODUCTS AND FORGING STOCK
    SAE AMS 4107 : 2018 ALUMINUM ALLOY DIE FORGINGS (7050-T74) SOLUTION HEAT TREATED AND OVERAGED
    SAE AMS5554G:2016 STEEL, CORROSION AND HEAT-RESISTANT, SEAMLESS TUBING, 16.5CR - 4.5NI - 2.9MO - 0.10N, ANNEALED
    SAE AMS 6525 : 2016 STEEL, BARS, FORGINGS, TUBING, AND RINGS, 0.75CR - 9.0NI - 4.5CO - 1.0MO - 0.09V (0.17 - 0.23C), CONSUMABLE ELECTRODE VACUUM MELTED
    SAE AMS 7001 : 2018 NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, POWDER FOR ADDITIVE MANUFACTURING, 62NI - 21.5CR - 9.0MO - 3.65NB
    SAE AMS 6516 : 2017 STEEL, BARS AND FORGINGS 1CR - 10NI - 7CO - 2MO - 1.3W - 0.1V - (0.28 - 0.32C) VACUUM INDUCTION MELTED, VACUUM ARC REMELTED, NORMALIZED AND ANNEALED PRECIPITATION HARDENABLE
    SAE AMS4221E : 2016 ALUMINUM ALLOY, PLATE, 4.4CU - 1.5MG - 0.60MN (2124-T8151) SOLUTION HEAT TREATED, STRESS RELIEVED, AND PRECIPITATION HEAT TREATED
    SAE AMS 4149 : 2016 ALUMINUM ALLOY, DIE AND HAND FORGINGS, 5.6ZN - 2.5MG - 1.6CU - 0.23CR (7175-T74), SOLUTION AND PRECIPITATION HEAT TREATED
    SAE AMS 4375 : 2017 SHEET AND PLATE, MAGNESIUM ALLOY - 3.0AL - 1.0ZN - 0.20MN (AZ31B-0) ANNEALED AND RECRYSTALLIZED
    SAE AMS 5662 : 2016 NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS 52.5NI - 19CR - 3.0MO - 5.1CB (NB) - 0.90TI - 0.50AI - 18FE CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED 1775 DEGREES F (968 DEGREES C) SOLUTION HEAT TREATED, PRECIPITATION-HARDENABLE
    SAE AMS 5825 : 2017 STEEL, CORROSION-RESISTANT, WELDING WIRE 16.4CR - 4.8NI - 0.22CB(NB) - 3.6CU
    SAE AMS 5540 : 2017 NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, SHEET, STRIP, AND PLATE, 74NI - 15.5CR - 8.0FE, ANNEALED
    SAE AMS 2821 : 2017 SALTS, HEAT-TREATING (FOR METALS)
    SAE AMS 4120 : 2018 ALUMINUM ALLOY, ROLLED OR COLD FINISHED BARS, RODS, AND WIRE, 4.4CU - 1.5MG - 0.60MN (2024), SOLUTION HEAT TREATED AND NATURALLY AGED (T4), SOLUTION HEAT TREATED, COLD WORKED, AND NATURALLY AGED (T351)
    SAE AMS 5917 : 2011 METAL INJECTION MOLDED NICKEL BASED, ALLOY 718 PARTS, HOT ISOSTATICALLY PRESSED, SOLUTIONED AND AGED
    SAE AMS 4313 : 2016 ALUMINUM ALLOY, ROLLED OR FORGED RINGS, 6.3CU - 0.30MN - 0.18ZR - 0.10V - 0.06TI (2219-T351, 2219-T352) SOLUTION HEAT TREATED AND MECHANICALLY STRESS RELIEVED
    SAE AMS 4041 : 2012-07 ALUMINUM ALLOY, SHEET AND PLATE, ALCLAD 4.4CU - 1.5MG - 0.60MN (2024, -T3 SHEET/-T351 PLATE WITH 1-1/2% ALCLAD) SOLUTION HEAT TREATED, COLD WORKED AND NATURALLY AGED
    SAE AMS 4475 : 2017 ALUMINUM ALLOY, COILED SHEET, ALCLAD, 4.4CU - 1.5MG - 0.60MN (ALCLAD 2024; -T4 COILED SHEET), SOLUTION HEAT TREATED
    SAE AMS 6529 : 2017 STEEL, BARS, 0.95CR - 0.20MO (0.38 - 0.43C) (SAE 4140), SPECIAL AIRCRAFT-QUALITY CLEANLINESS, NORMALIZED
    SAE AMS 6448 : 2013 STEEL, BARS, FORGINGS AND TUBING 0.95CR - 0.22V (0.48 - 0.53C) (SAE 6150)
    SAE AMS 5357 : 2017 STEEL, CORROSION RESISTANT, INVESTMENT CASTINGS, 15CR - 4.6NI - 0.22CB - 2.8CU, SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE
    SAE AMS 3025 : 2018 POLYALKYLENE GLYCOL HEAT TREAT QUENCHANT
    SAE AMS 4467 : 2017 ALUMINUM ALLOY, SHEET AND PLATE, ALCLAD 4.4CU 1.5MG 0.60MN (ALCLAD 2024, -T861 SHEET & PLATE) SOLUTION HEAT TREATED, 6% COLD WORKED AND ARTIFICIALLY AGED
    SAE AMS 5632 : 2018 STEEL, CORROSION-RESISTANT, BARS, WIRE, AND FORGINGS, 17CR - 0.50MO (0.95 - 1.20C) (440F), FREE-MACHINING, ANNEALED
    SAE AMS 5635 : 2018 STEEL, CORROSION-RESISTANT, BARS, WIRE, AND FORGINGS, 18CR - 9NI - 0.21PB (303PB), FREE-MACHINING, SOLUTION HEAT TREATED
    SAE AMS 2249 : 2017 CHEMICAL CHECK ANALYSIS LIMITS, TITANIUM AND TITANIUM ALLOYS
    SAE AMS 4157 : 2018 ALUMINUM ALLOY EXTRUSIONS, 7.7ZN - 2.4MG - 1.6CU - 0.16CR (7049-T73511), SOLUTION HEAT TREATED, STRESS RELIEVED, AND OVERAGED
    SAE AMS 4327 : 2016 ALUMINUM ALLOY, PLATE (2098-O), 3.5CU - 1.1LI - 0.50MG - 0.40AG - 0.11ZR, ANNEALED
    SAE AIR 4779 : 2014 USER'S GUIDE TO AMS SPECIFICATIONS
    SAE AMS 4942 : 2018 TITANIUM TUBING, SEAMLESS, ANNEALED, 40.0 KSI (275 MPA) YIELD STRENGTH
    SAE AMS 6511 : 2012 STEEL, MARAGING, BARS, FORGINGS, TUBING, AND RINGS 18NI - 8.5CO - 3.2MO - 0.20TI - 0.10AL DOUBLE VACUUM MELTED, ANNEALED
    SAE AMS 4935 : 2017 TITANIUM ALLOY EXTRUSIONS AND FLASH WELDED RINGS, 6AL - 4V, ANNEALED, BETA PROCESSED
    SAE AMS 6257 : 2016 STEEL BARS, FORGINGS, AND TUBING, 1.6SI - 0.82CR - 1.8NI - 0.40MO - 0.08V (0.40 - 0.44C), CONSUMABLE ELECTRODE VACUUM REMELTED, NORMALIZED AND TEMPERED
    S.R. CWA 16762:2014 CEN WORKSHOP AGREEMENT - CEN/WS SERES - ICT STANDARDS IN SUPPORT OF AN EREPORTING FRAMEWORK FOR THE ENGINEERING MATERIALS SECTOR
    SAE AMS 6559 : 2013 STEEL, BARS, WIRE, AND FORGINGS 9.75V - 5.25CR - 1.3MO (2.40 - 2.55C) POWDER METALLURGY PRODUCT HOT ISOSTATICALLY PRESSED
    SAE AMS 2409 : 2016 PLATING, IMMERSION TIN FOR ALUMINUM ALLOYS
    SAE AMS 6346 : 2013 STEEL BARS, 0.95CR - 0.20MO (0.28 TO 0.33C) (SAE 4130), HARDENED AND TEMPERED, 125 KSI (862 MPA) TENSILE STRENGTH
    SAE AMS 6424 : 2017 STEEL BARS, FORGINGS, AND TUBING 0.80CR - 1.8NI - 0.25MO (0.49 - 0.55C)
    SAE AMS 5876 : 2018 COBALT ALLOY, CORROSION AND HEAT-RESISTANT, STRIP, 20CR - 15NI - 40CO - 7.0MO - 16FE, VACUUM INDUCTION PLUS CONSUMABLE ELECTRODE REMELTED, SOLUTION HEAT TREATED AND COLD ROLLED
    SAE AMS 4553D : 2017 BRASS, SEAMLESS, TUBING 85CU - 15ZN ANNEALED (O61)
    SAE AMS 6277 : 2016 STEEL BARS, FORGINGS, AND TUBING, 0.50CR - 0.55NI - 0.20MO (0.18 - 0.23C) (SAE 8620), VACUUM ARC OR ELECTROSLAG REMELTED
    SAE AMS 6371L : 2017 STEEL, MECHANICAL TUBING, 0.95CR - 0.20MO (0.28 - 0.33C) (SAE 4130)
    SAE AMS 5918 : 2011 COBALT ALLOY, CORROSION AND HEAT RESISTANT, BARS, 62CO - 28CR - 6MO, WARM-WORKED
    SAE AMS 4945 : 2014 TITANIUM ALLOY TUBING, SEAMLESS, HYDRAULIC 3AL - 2.5V, CONTROLLED CONTRACTILE STRAIN RATIO COLD WORKED, STRESS RELIEVED
    SAE AMS 6556 : 2013 STEEL, BARS, WIRE, AND FORGINGS, 8V - 4CR - 4W - 3MO (2.45 - 2.55C), POWDER METALLURGY PRODUCT, HOT ISOSTATICALLY PRESSED
    SAE AMS 5700G : 2018 STEEL, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 13.5CR - 13.5NI - 0.35MO - 2.2W, ANNEALED
    SAE AMS 5714 : 2018 ALLOY BARS, FORGINGS, AND RINGS, CORROSION AND HEAT-RESISTANT, 73NI - 15.5CR - 2.5TI - 0.70AL - 7.0FE, PRECIPITATION-HARDENABLE
    SAE AMS 5666H : 2016 NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, EXTRUSIONS, AND RINGS, 62NI - 21.5CR - 9.0MO - 3.65CB (NB), ANNEALED
    SAE AMS 2428 : 2017 PLATING, COBALT-PHOSPHORUS, NANOCRYSTALLINE
    SAE AMS 4941 G : 2017 TITANIUM TUBING, WELDED, 40 KSI (276 MPA) YIELD STRENGTH
    SAE AMS 4434 : 2017 MAGNESIUM ALLOY CASTINGS, SAND, 9.0AL - 2.0ZN (AZ92A-T6), SOLUTION AND PRECIPITATION HEAT TREATED
    SAE AMS 4993F : 2017 TITANIUM ALLOY, BLENDED POWDER COMPACTS, SINTERED, 6AL - 4V
    SAE AMS 5558H : 2016 STEEL, CORROSION AND HEAT-RESISTANT, WELDED TUBING 18CR - 10.5NI - 0.70CB (NB) (347) THIN WALL SOLUTION HEAT TREATED
    SAE AMS 5768 : 2018 ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 21CR - 20NI - 20CO - 3.0MO - 2.5W - 1.0CB - 0.15N - 31FE, SOLUTION AND PRECIPITATION HEAT TREATED
    SAE AMS 6494 : 2016 STEEL BARS, FORGINGS, AND TUBING, 1.0CR - 2.50NI - 2.0MO - 1.10SI (0.10 - 0.20C) AIRCRAFT-QUALITY
    SAE AMS 4464 : 2017 ALUMINUM ALLOY PLATE (2624-T351) 4.1CU - 1.4MG - 0.6MN, SOLUTION HEAT TREATED, COLD WORKED AND NATURALLY AGED
    SAE AMS 4049 : 2016 ALUMINUM ALLOY, SHEET AND PLATE, ALCLAD 5.6ZN - 2.5MG - 1.6CU - 0.23CR (ALCLAD 7075; -T6 SHEET - T651 PLATE) SOLUTION AND PRECIPITATION HEAT TREATED
    SAE AMS 4601 : 2017 ALUMINUM ALLOY, SHEET AND PLATE, 6.3CU - 0.30MN - 0.06TI - 0.10V - 0.18ZR, SOLUTION HEAT TREATED, COLD WORKED AND NATURALLY AGED (2219 -T31/-T351)
    SAE AMS 5862M:2017 STEEL, CORROSION-RESISTANT, SHEET, STRIP, AND PLATE, 15CR - 4.5NI - 0.30CB (NB) - 3.5CU, CONSUMABLE ELECTRODE REMELTED, SOLUTION HEAT TREATED, PRECIPITATION-HARDENABLE
    SAE AMS 4975 : 2017 TITANIUM ALLOY, BARS, WIRE, AND RINGS, 6.0AL - 2.0SN - 4.0ZR - 2.0MO - 0.08SI, SOLUTION AND PRECIPITATION HEAT TREATED
    SAE AMS 5916 : 2017 ALLOY, CORROSION AND HEAT-RESISTANT, SHEET, STRIP, AND PLATE, 35FE - 24CR - 37NI - 0.65CB(NB) - 0.2N, ANNEALED
    SAE AMS 4350 : 2017 MAGNESIUM ALLOY, EXTRUSIONS 6.5A1 - 0.95ZN (AZ61A-F) AS EXTRUDED
    SAE AMS 4357 : 2016 ALUMINUM ALLOY, DIE FORGINGS 3.5CU - 1.0LI - 0.04MG - 0.35MN - 0.45AG - 0.12ZR (2050-T852) SOLUTION HEAT TREATED, COLD WORKED AND ARTIFICIALLY AGED
    SAE AMS 3920 : 2014 ACCEPTANCE CRITERIA, ADHESIVE-BONDED METAL-FACED SANDWICH STRUCTURES
    SAE AMS 5631 : 2018 STEEL, CORROSION-RESISTANT, BARS AND FORGINGS, 17CR (0.60 - 0.75C) (440A)
    SAE AMS 2375 : 2017-07 CONTROL OF FORGINGS REQUIRING FIRST ARTICLE APPROVAL
    SAE AMS 6303 : 2018 STEEL BARS AND FORGINGS, LOW ALLOY, HEAT-RESISTANT, 0.65SI - 1.25CR - 0.50MO - 0.85V (0.25 - 0.30C)
    SAE AMS 6946 : 2014 TITANIUM ALLOY, SHEET, STRIP, AND PLATE 4AL - 2.5V - 1.5FE, ANNEALED
    SAE AMS 4959 : 2017 TITANIUM ALLOY WIRE 13.5V - 11CR - 3AL SPRING TEMPER
    SAE AMS 4443 : 2017 MAGNESIUM ALLOY, SAND CASTINGS, 4.5ZN - 0.75ZR (ZK51A-T5) PRECIPITATION HEAT TREATED
    SAE AMS 4340 : 2011 ALUMINUM ALLOY, EXTRUSIONS, 6.2ZN - 2.3CU - 2.2MG - 0.12ZR (7050-T76511), SOLUTION HEAT TREATED, STRESS RELIEVED, STRAIGHTENED, AND OVERAGED
    SAE AMS 5339 : 2017 STEEL, MARAGING, INVESTMENT CASTINGS, 17NI - 10CO - 4.6MO - 0.30TI - 0.06AL, VACUUM MELTED, HOMOGENIZED, OVERAGED AND SOLUTION HEAT TREATED
    SAE AMS 5955 : 2016 STEEL, CORROSION-RESISTANT, BARS, WIRE, AND FORGINGS 10CR - 12NI - 2MO - 1.45AL - 1.15TI VACUUM INDUCTION PLUS VACUUM CONSUMABLE ELECTRODE MELTED SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE
    SAE AMS 6267J: 2016 STEEL BARS, FORGINGS, AND TUBING, 1.2CR - 3.25NI - 0.12MO (0.07 - 0.13C) (9310), ELECTROSLAG REMELTED OR CONSUMABLE ELECTRODE VACUUM REMELTED
    SAE AMS 7000 : 2018 LASER-POWDER BED FUSION (L-PBF) PRODUCED PARTS, NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, 62NI - 21.5CR - 9.0MO - 3.65NB STRESS RELIEVED, HOT ISOSTATIC PRESSED AND SOLUTION ANNEALED
    SAE AMS 6360 : 2013 STEEL TUBING, SEAMLESS, 0.95CR - 0.20MO (0.28 - 0.33C) (SAE 4130), NORMALIZED OR STRESS RELIEVED
    SAE AMS 4268 : 2017 ALUMINUM ALLOY, SHEET AND PLATE, 4.4CU - 1.5MG - 0.60MN; (2024-T81 SHEET, -T851 PLATE), SOLUTION HEAT TREATED, COLD WORKED AND ARTIFICIALLY AGED
    SAE AMS 5618 : 2017 STEEL, CORROSION-RESISTANT, BARS, WIRE, AND FORGINGS, 17CR - 0.52MO (0.95 - 1.20C) (440C), CONSUMABLE ELECTRODE VACUUM MELTED
    SAE AMS 4329 : 2017 ALUMINUM ALLOY, PLATE (7085-T7651), 7.5ZN - 1.6CU - 1.5MG - 0.12ZR, SOLUTION HEAT TREATED, STRESS-RELIEVED, AND OVERAGED
    SAE AMS 6528 : 2017 STEEL, BARS, 0.95CR - 0.20MO (0.28 - 0.33C) (SAE 4130), SPECIAL AIRCRAFT QUALITY CLEANLINESS, NORMALIZED
    SAE AMS 6931 : 2017 TITANIUM ALLOY BARS, FORGINGS AND FORGING STOCK, 6.0AL - 4.0V, ANNEALED
    SAE AMS 6435 : 2017 STEEL, SHEET, STRIP, AND PLATE, 0.75MN - 0.78CR - 1.8NI - 0.35MO - 0.20V (0.33 - 0.38C) (4335 MOD), VACUUM CONSUMABLE ELECTRODE MELTED, ANNEALED
    SAE AMS 5506 : 2018 STEEL, CORROSION AND HEAT RESISTANT, SHEET, STRIP, AND PLATE, 13CR (0.30 - 0.40C) (420), ANNEALED
    SAE AMS 6560 : 2013 STEEL BARS, WIRE AND FORGINGS 10CO - 7MO - 6V - 6W - 4CR (2.2 - 2.4C) PREMIUM AIRCRAFT-QUALITY FOR BEARING APPLICATIONS INERT GAS ATOMIZED AND HOT ISOSTATICALLY PRESSED CONSOLIDATED
    SAE AMS 6457E : 2017 STEEL, WELDING WIRE, 0.95CR - 0.20MO (0.28 - 0.33C) (SAE 4130), VACUUM MELTED, ENVIRONMENT CONTROLLED PACKAGING
    SAE AMS 4284 : 2017 ALUMINUM ALLOY CASTINGS, PERMANENT MOLD, 7.0SI - 0.30MG (356.0-T6), SOLUTION AND PRECIPITATION HEAT TREATED
    SAE AMS 2420 : 2017 PLATING OF ALUMINUM FOR SOLDERABILITY ZINC IMMERSION PRE-TREATMENT PROCESS
    SAE AMS 6532 : 2014 STEEL, BARS AND FORGINGS, 3.1CR - 11.5NI - 13.5CO - 1.2MO (0.21 - 0.25C) VACUUM MELTED, NORMALIZED AND OVERAGED, PRECIPITATION HARDENABLE
    SAE AMS 6255F : 2016 STEEL BARS, FORGINGS, AND TUBING, 1.1SI - 1.45CR - 1.0MO - 0.08AL (0.16 - 0.22C), DOUBLE VACUUM MELTED
    SAE AMS 2355 : 2017 QUALITY ASSURANCE, SAMPLING AND TESTING, ALUMINUM ALLOYS AND MAGNESIUM ALLOY, WROUGHT PRODUCTS (EXCEPT FORGING STOCK), AND ROLLED, FORGED, OR FLASH WELDED RINGS
    SAE AMS 2759 : 2014 HEAT TREATMENT OF STEEL PARTS, GENERAL REQUIREMENTS
    SAE AMS 6348 : 2013 STEEL, BARS, 0.95CR - 0.20MO (0.28 TO 0.33C) (SAE 4130), NORMALIZED
    SAE AMS 7707 : 2018 IRON, COMMERCIALLY PURE, BAR, SHEET, STRIP, AND PLATE HOT ROLLED, UNANNEALED
    SAE AMS 4402 : 2018 ALUMINUM ALLOY, EXTRUDED PROFILES (2024-T432), 4.4CU - 1.5MG - 0.6MN, ANNEALED, STRETCH FORMED, SOLUTION HEAT TREATED AND STRESS RELIEVED BY STRETCHING
    SAE AMS 4359 : 2016 ALUMINUM ALLOY, EXTRUDED PROFILES (2395-T84), 3.95CU - 1.15LI - 0.3AG - 0.5MG - 0.1ZR, SOLUTION HEAT TREATED, STRESS RELIEVED BY STRETCHING, AND AGED
    SAE AMS6481D:2017 STEEL BARS, FORGINGS, AND TUBING, NITRIDING, 3CR - 1MO - 0.2V - (0.29 - 0.36C), PREMIUM AIRCRAFT-QUALITY FOR BEARING APPLICATIONS, DOUBLE VACUUM MELTED
    SAE AMS 3379 : 2013(R2018) SEALING COMPOUND, POLYSULFIDE RUBBER PREFORMED STRIPS FOR SEALING REMOVABLE DOORS, SKINS, AND PANELS
    SAE AMS 5643 : 2018 STEEL, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, MECHANICAL TUBING, AND RINGS, 16CR - 4.0NI - 0.30CB (NB) - 4.0CU, SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE
    SAE AMS 4966 : 2017 TITANIUM ALLOY, FORGINGS, 5AL - 2.5SN, ANNEALED, 110 KSI (758 MPA) YIELD STRENGTH
    SAE AMS 6475 : 2013 STEEL, NITRIDING, BARS, FORGINGS, AND TUBING, 1.1CR - 3.5NI - 0.25MO - 1.2AL (0.21 - 0.26C)
    SAE AMS 4466 : 2017 ALUMINUM ALLOY, SHEET AND PLATE, ALCLAD, 4.4CU - 1.5MG - 0.60MN (ALCLAD 2024, -T361 SHEET & PLATE), SOLUTION HEAT TREATED, 6% COLD WORKED AND NATURALLY AGED
    SAE AMS 4405 : 2012 ALUMINUM ALLOY, ALCLAD SHEET (6156-T4), 1.0SI - 0.90CU - 0.60MN - 0.90MG, SOLUTION HEAT TREATED AND NATURALLY AGED
    SAE AMS 4332 : 2012 ALUMINUM ALLOY, EXTRUDED PROFILES (7349-T76511) 8.1ZN - 1.7CU - 2.2MG - 0.16ZR SOLUTION HEAT TREATED, STRESS-RELIEVED, AND OVERAGED
    SAE AMS 3415 : 2017 FLUX, ALUMINUM DIP BRAZING 1030 DEGREES F (554 DEGREES C) OR LOWER LIQUIDUS
    SAE AMS 5866 : 2016 STEEL, CORROSION-RESISTANT, FLAT WIRE, 18CR - 9.0NI (302), SPRING TEMPER
    SAE AMS 6290 : 2013 STEEL, BARS AND FORGINGS, CARBURIZING, 1.8NI - 0.25MO (0.11 - 0.17C) (SAE 4615)
    SAE AMS 5718E : 2016 STEEL, BARS, FORGINGS, TUBING, AND RINGS, CORROSION RESISTANT, 11.8CR - 2.5NI - 1.8MO - 0.33V (0.08 - 0.15C), ANNEALED
    SAE AMS 5410 : 2017 NICKEL ALLOY, CORROSION AND HEAT RESISTANT, INVESTMENT CASTINGS, 61NI - 16CR - 8.5CO - 1.8MO - 2.6W - 0.85CB (NB) - 3.4TI - 1.8TA - 3.4AL - 0.010B - 0.05ZR, VACUUM MELTED, VACUUM CAST AS CAST, OR SOLUTION TREATED, OR SOLUTION AND PRECIPITATION HARDENED
    SAE AMS 5585 : 2016 ALLOY, CORROSION AND HEAT RESISTANT, WELDED TUBING, 32FE - 21CR - 20NI - 20CO - 3MO - 2.5W - 1.0CB (NB) - 0.15N, SOLUTION HEAT TREATED
    SAE AMS 5716 : 2016 IRON-NICKEL ALLOY, HEAT RESISTANT, BARS, WIRE, FORGINGS, AND RINGS, 44FE - 18.5CR - 35.5NI - 1.1SI, SOLUTION HEAT TREATED
    SAE AMS 4911 : 2018 TITANIUM ALLOY, SHEET, STRIP, AND PLATE, 6AL - 4 V, ANNEALED
    SAE AMS 6558 : 2013 STEEL, BARS, WIRE, AND FORGINGS 10.5MO - 6W - 3.75CR - 2V (1.25 - 1.40C) POWDER METALLURGY PRODUCT HOT ISOSTATICALLY PRESSED
    SAE AMS 3050/6 : 2017 PERFORMANCE SPECIFICATION ANTI-SEIZE THREAD COMPOUND, HIGH TEMPERATURE - 'NICKEL+GRAPHITE' ONLY
    SAE AMS 5333 : 2017 STEEL, INVESTMENT CASTINGS, 0.50CR - 0.55NI - 0.25MO (0.11 - 0.17C) (SAE 8615), NORMALIZED
    SAE AMS 4973 : 2016 TITANIUM ALLOY FORGINGS, 8AL - 1MO - 1V, SOLUTION HEAT TREATED AND STABILIZED
    NASA HDBK 6025 : 2014 GUIDELINES FOR THE SPECIFICATION AND CERTIFICATION OF TITANIUM ALLOYS FOR NASA FLIGHT APPLICATIONS
    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective