SAE AS 1227 : 2013
Current
Current
The latest, up-to-date edition.
HOSE ASSEMBLY, CONVOLUTED POLYTETRAFLUOROETHYLENE, METALLIC REINFORCED, LOW PRESSURE, UP TO 400 DEGREES F, AIRCRAFT
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
02-01-2013
Publisher
1. SCOPE
2. REFERENCES
3. TECHNICAL REQUIREMENTS
4. QUALITY ASSURANCE PROVISIONS
5. PREPARATION FOR DELIVERY
6. NOTES
This SAE Aerospace Standard (AS) defines the requirements for a convoluted polytetrafluoroethylene (PTFE) lined, metallic reinforced, hose assembly suitable for use in aerospace fluid systems at temperatures between -65 °F and 400 °F for Class 1 assembly, -65 °F and 275 °F for Class 2 assembly, and at operating pressures perTable 1.
| Committee |
G-3
|
| DocumentType |
Standard
|
| Pages |
23
|
| PublisherName |
SAE International
|
| Status |
Current
|
| Supersedes |
| SAE AIR 5128 : 2012 | ELECTRICAL BONDING OF AIRCRAFT FUEL SYSTEMS |
| SAE ARP 4925 : 2014 | AEROSPACE DESIGN AND INSTALLATION OF COMMERCIAL TRANSPORT HELICOPTER HYDRAULIC SYSTEMS |
| A-A-59471 Base Document:1999 | Dry Cleaning Presses and Finishing Equipment (Naval Shipboard) |
| SAE AS 150 : 2017 | HOSE ASSEMBLY, TYPE CLASSIFICATIONS OF, BASIC PERFORMANCE AND FIRE RESISTANCE |
| SAE ARP 4752 : 2013 | AEROSPACE - DESIGN AND INSTALLATION OF COMMERCIAL TRANSPORT AIRCRAFT HYDRAULIC SYSTEMS |
| SAE AIR 5693 : 2014 | COMPATIBILITY OF PTFE HOSE ASSEMBLIES WITH TYPICAL FLUIDS FOUND IN AEROSPACE APPLICATIONS |
| SAE AMS 5689 : 2012 | STEEL, CORROSION AND HEAT RESISTANT, WIRE 18CR - 10.5NI - 0.40TI (321) SOLUTION HEAT TREATED |
| SAE AMS5659S : 2016 | Steel, Corrosion-Resistant, Bars, Wire, Forgings, Rings, and Extrusions 15Cr - 4.5Ni - 0.30Cb (Nb) - 3.5Cu<br> |
| SAE AMS 5645 : 2016 | STEEL, CORROSION AND HEAT RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS, 18CR - 10NI - 0.40TI (321), SOLUTION HEAT TREATED |
| SAE ARP 1835 : 2013 | PREPARATION FOR DELIVERY, GENERAL REQUIREMENTS FOR HOSE ASSEMBLIES |
| SAE AS 611F : 2010 | HOSE ASSEMBLY AND TUBING, POLYTETRAFLUOROETHYLENE, CLEANING METHODS FOR |
| ASTM A 262 : 2015 : REDLINE | Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels |
| MIL-STD-130 Revision N:2007 | IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY |
| NAS1760:2015 | FITTING END, FLARELESS ACORN, STANDARD DIMENSIONS FOR |
| MIL-PRF-7808 Revision L:1997 | LUBRICATING OIL, AIRCRAFT TURBINE ENGINE, SYNTHETIC BASE |
| SAE AMS 5571J:2012(R2018) | STEEL, CORROSION AND HEAT-RESISTANT, SEAMLESS TUBING, 18CR - 10.5NI - 0.70CB (NB) (347), SOLUTION HEAT TREATED |
| SAE AS 1708 : 2017 | FITTING END, INTERNAL FLARE, DESIGN STANDARD |
| SAE AMS 5656F : 2015 | STEEL, CORROSION RESISTANT, BARS, WIRE, FORGINGS, EXTRUSIONS, AND RINGS, 9.0MN - 20CR - 6.5NI - 0.27N, SOLUTION HEAT TREATED |
| SAE AMS 5643 : 2016 | STEEL, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, MECHANICAL TUBING, AND RINGS, 16CR - 4.0NI - 0.30CB (NB) - 4.0CU, SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE |
| SAE AS 4395 : 2013 | FITTING END, FLARED, TUBE CONNECTION, DESIGN STANDARD |
| SAE AMS 5697 : 2012 | STEEL, CORROSION-RESISTANT, WIRE, 19CR - 9.5NI (304), SOLUTION HEAT TREATED |
| SAE AMS 5690 : 2015 | STEEL, CORROSION AND HEAT RESISTANT, WIRE, 17CR - 12NI - 2.5MO (316), SOLUTION HEAT TREATED |
| SAE AMS 5573 : 2012 | STEEL, CORROSION AND HEAT-RESISTANT, SEAMLESS TUBING, 17CR - 12NI - 2.5MO (SAE 30316), SOLUTION HEAT TREATED |
| SAE AS 1055 : 2013 | FIRE TESTING OF FLEXIBLE HOSE, TUBE ASSEMBLIES, COILS, FITTINGS AND SIMILAR SYSTEM COMPONENTS |
| MIL-HDBK-831 Revision A:2013 | PREPARATION OF TEST REPORTS |
| ASME B46.1 : 2009 | SURFACE TEXTURE (SURFACE ROUGHNESS, WAVINESS, AND LAY) |
| SAE AMS 5647 : 2017 | STEEL, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, MECHANICAL TUBING, AND RINGS, 19CR - 9.5NI, SOLUTION HEAT TREATED |
| SAE AMS 5648 : 2016 | STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS, 17CR - 12NI - 2.5MO (316), SOLUTION HEAT TREATED |
| SAE ARP 908 : 2013 | TORQUE REQUIREMENTS, INSTALLATION AND QUALIFICATION TEST, HOSE AND TUBE FITTING |
| SAE AMS QQ P 35 : 1998 | PASSIVATION TREATMENTS FOR CORROSION-RESISTANT STEEL |
| MIL-PRF-87257 Revision C:2017 | HYDRAULIC FLUID, FIRE RESISTANT, LOW TEMPERATURE, SYNTHETIC HYDROCARBON BASE, AIRCRAFT AND MISSILE |
| SAE AS 7003 : 2008 | NADCAP PROGRAM REQUIREMENTS |
| SAE AS 7112 : 1997 | NATIONAL AEROSPACE AND DEFENSE CONTRACTORS ACCREDITATION PROGRAM REQUIREMENTS FOR FLUID SYSTEM COMPONENTS |
| SAE AMS 5567 : 2015 | STEEL, CORROSION RESISTANT, SEAMLESS OR WELDED HYDRAULIC TUBING, 19CR - 10NI (304), SOLUTION HEAT TREATED |
| SAE AMS 5637 : 2012 | STEEL, CORROSION RESISTANT, BARS AND WIRE 18CR - 9.0NI (SAE 30302) SOLUTION HEAT TREATED, COLD DRAWN AND STRESS RELIEVED 125 KSI (862 MPA) TENSILE STRENGTH |
| SAE AMS 5646 : 2014 | STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS, 18CR - 11NI - 0.60CB(NB) (347), SOLUTION HEAT TREATED |
| SAE AS 8879 : 2004 | SCREW THREADS - UNJ PROFILE, INCH CONTROLLED RADIUS ROOT WITH INCREASED MINOR DIAMETER |
| SAE AMS 5575 : 2013 | STEEL, CORROSION AND HEAT-RESISTANT, WELDED TUBING, 18CR - 10.5NI - 0.70CB (NB) (347), SOLUTION HEAT TREATED |
| SAE AMS 5570 : 2013 | STEEL, CORROSION AND HEAT-RESISTANT, SEAMLESS TUBING 18CR - 11NI - 0.40TI (321), SOLUTION HEAT TREATED |
| MIL A 8625 : F | ANODIC COATINGS FOR ALUMINUM AND ALUMINUM ALLOYS |
| SAE AMS 4117 : 2015 | ALUMINUM ALLOY, ROLLED OR COLD FINISHED BARS, RODS, AND WIRE AND FLASH WELDED RINGS, 1.0MG - 0.60SI - 0.28CU - 0.20CR (6061; -T6, -T651) |
| SAE AMS 4127 : 2012 | ALUMINUM ALLOY, FORGINGS AND ROLLED OR FORGED RINGS, (6061-T6) SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AS 2078 : 2015 | TEST METHODS, HOSE ASSEMBLIES, POLYTETRAFLUOROETHYLENE (PTFE) |
| SAE AMS 4069 : 2015 | ALUMINUM ALLOY, DRAWN, ROUND SEAMLESS TUBING, CLOSE TOLERANCE, 2.5MG - 0.25CR (5052-0) ANNEALED |
| MIL-STD-100 Revision G:1997 | ENGINEERING DRAWINGS |
| MIL-PRF-83282 Revision D:1997 | HYDRAULIC FLUID, FIRE RESISTANT, SYNTHETIC HYDROCARBON BASE, METRIC, NATO CODE NUMBER H-537 |
| SAE AMS 5639 : 2017 | STEEL, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, MECHANICAL TUBING, AND RINGS, 19CR - 10NI, SOLUTION HEAT TREATED |
| MIL H 5606 : G | HYDRAULIC FLUID, PETROLEUM BASE; AIRCRAFT; MISSILE AND ORDNANCE |
| SAE AS 33514 : 2015 | FITTING END, STANDARD DIMENSIONS FOR FLARELESS TUBE CONNECTION AND GASKET SEAL |
| SAE AMS 4082 : 2014 | ALUMINUM ALLOY, SEAMLESS DRAWN TUBING, 1.0MG - 0.60SI - 0.28CU - 0.20CR (6061-T6) SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AS 150 : 2014 | HOSE ASSEMBLY, TYPE CLASSIFICATIONS OF, BASIC PERFORMANCE AND FIRE RESISTANCE |
| SAE AMS 4339 : 2004 | ALUMINUM ALLOY, ROLLED OR COLD FINISHED BARS AND RODS 4.4CU - 1.5MG - 0.60MN (2024-T-851) SOLUTION HEAT TREATED, COLD WORKED, AND ARTIFICIALLY AGED |
| SAE AMS5644E:1964(S2017) | STEEL, BARS AND FORGINGS, CORROSION RESISTANT, 17CR - 7NI - 1AL |
| SAE AMS 5636 : 2006 | STEEL, CORROSION-RESISTANT, BARS AND WIRE, 18CR - 9.0NI (SAE 30302), SOLUTION HEAT TREATED AND COLD DRAWN, 100 KSI (689 MPA) TENSILE STRENGTH |
| ASTM D 471 : 2016-02 | TEST METHOD FOR RUBBER PROPERTY - EFFECT OF LIQUIDS |
| SAE AMS 5653 : 2012 | STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS, 17CR - 12NI - 2.5MO (0.030 MAX C) (316L), SOLUTION HEAT TREATED |
| SAE AMS 5556 : 2016 | STEEL, CORROSION AND HEAT-RESISTANT, SEAMLESS OR WELDED HYDRAULIC TUBING 18CR - 11NI - 0.70CB (347) SOLUTION HEAT TREATED |
| SAE AMS 4121 : 2017 | ALUMINUM ALLOY BARS, RODS, AND WIRE, ROLLED, DRAWN, OR COLD FINISHED, 4.5CU - 0.85SI - 0.80MN - 0.50MG (2014-T6, -T651), SOLUTION AND PRECIPITATION HEAT TREATED |
| NAS847:2012 | CAPS AND PLUGS, PROTECTIVE, DUST AND MOISTURE SEAL |
| SAE AMS 5557 : 2012 | STEEL, CORROSION AND HEAT RESISTANT, SEAMLESS OR WELDED HYDRAULIC TUBING, 18.5CR - 10.5NI - 0.40TI (SAE 30321), SOLUTION HEAT TREATED |
$245.53
Including GST where applicable
AUD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - English
PDF - English
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.