SAE AS1990D:2003(S2016)
Current
Current
The latest, up-to-date edition.
ALUMINUM ALLOY TEMPERS
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
02-01-2016
Publisher
1. SCOPE
2. REFERENCES
3. GENERAL
4. GENERAL RULES DESCRIBING THE ALUMINUM,
ALUMINUM ALLOY-TEMPER SYSTEM
5. LIST OF ALLOY-TEMPERS OF INTEREST TO THE
AEROSPACE INDUSTRY
6. NOTES
ANNEX A
The purpose of this SAE Aerospace Standard (AS) is to provide a description of the temper nomenclature system for aluminum alloys used in the aerospace industry by combining information from different sources for the benefit of the user.
| Committee |
AMS-D
|
| DocumentType |
Standard
|
| Pages |
33
|
| ProductNote |
This version is stabilized
|
| PublisherName |
SAE International
|
| Status |
Current
|
| Supersedes |
| SAE AMS 4319 : 2013 | ALUMINUM ALLOY, ROLLED OR COLD FINISHED, BARS AND RODS 12.2SI - 1.0MG - 0.90CU - 0.90NI (4032-T651) SOLUTION HEAT TREATED, STRESS-RELIEVED, AND ARTIFICIALLY AGED |
| SAE AMS 4113 : 2014 | ALUMINUM ALLOY, EXTRUDED PROFILES 1.0MG - 0.60SI - 0.28CU - 0.20CR (6061-T6) SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 4272 : 2015 | ALUMINUM ALLOY, ALCLAD SHEET AND PLATE (ALCLAD 2029-T8) 3.6 CU, 0.30 MN, 0.95 MG, 0.40 AG, 0.12 ZR SOLUTION HEAT TREATED, COLD WORKED AND AGED |
| SAE AMS 4159 : 2015 | ALUMINUM ALLOY, EXTRUSIONS 7.7ZN - 2.4MG - 1.6CU - 0.16CR (7049-T76511) SOLUTION HEAT TREATED, STRESS RELIEVED, STRAIGHTENED, AND OVERAGED |
| SAE AMS 4364 : 2016 | ALUMINUM ALLOY, PLATE, 7.9ZN - 1.8CU - 2.0MG - 0.10ZR (7099-T7651) SOLUTION HEAT TREATED, STRESS RELIEVED, AND OVERAGED |
| SAE AMS 4173 : 2013 | ALUMINUM ALLOY, EXTRUSIONS 1.0MG - 0.60SI - 0.30CU - 0.20CR (6061-T6511 OR T6510) SOLUTION HEAT TREATED, STRESS RELIEVED BY STRETCHING, STRAIGHTENED, AND PRECIPITATION HEAT TREATED |
| SAE AMS 4046 : 2017 | ALUMINUM ALLOY, SHEET AND PLATE, ALCLAD ONE SIDE 5.6ZN - 2.5MG - 1.6CU - 0.23CR (ALCLAD ONE SIDE 7075; -T6 SHEET -T651 PLATE) SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 4465 : 2015 | ALUMINUM ALLOY, CLAD ONE SIDE SHEET, 0.6MG - 0.35SI - 0.28CU (NO. 23 BRAZING SHEET), AS FABRICATED |
| SAE AMS 4311 : 2012 | ALUMINUM ALLOY, ROLLED OR FORGED RINGS, 5.6ZN - 2.5MG - 1.6CU - 0.23CR (7075-T7351, 7075-T7352), SOLUTION HEAT TREATED, MECHANICALLY STRESS RELIEVED, AND PRECIPITATION HEAT TREATED |
| SAE AMS 4330 : 2018 | ALUMINUM ALLOY, PLATE (2297-T87), 2.8CU - 1.5LI - 0.30MN - 0.12ZR, SOLUTION HEAT TREATED, STRETCHED, AND ARTIFICIALLY AGED |
| SAE AMS 4203 : 2012 | ALUMINUM ALLOY, PLATE, 6.2ZN - 1.8CU - 2.4MG - 0.13ZR (7010-T7351) SOLUTION HEAT TREATED, STRESS RELIEVED AND PRECIPITATION HEAT TREATED (COMPOSITION SIMILAR TO UNS A97010) |
| SAE AMS 4162 : 2014 | ALUMINUM ALLOY, EXTRUSIONS, 6.3CU - 0.30MN - 0.18ZR - 0.10V - 0.06TI (2219-T8511), SOLUTION TREATED, STRESS RELIEF STRETCHED, STRAIGHTENED, AND PRECIPITATION HEAT TREATED |
| SAE AMS 4413 : 2012 | ALUMINUM ALLOY, PLATE, 3.5 CU - 1.0LI - .40MG - .35 MN - .45AG - 0.12ZR (2050-T84), SOLUTION HEAT TREATED, STRESS RELIEVED, AND ARTIFICIALLY AGED |
| SAE AMS 4026 : 2014 | ALUMINUM ALLOY, SHEET AND PLATE, 1.0MG - 0.60SI - 0.28CU - 0.20CR (6061; -T4 SHEET, -T451 PLATE), SOLUTION HEAT TREATED AND NATURALLY AGED |
| SAE AMS 4027 : 2014 | ALUMINUM ALLOY, SHEET AND PLATE, 1.0MG - 0.60SI - 0.28CU - 0.20CR (6061; -T6 SHEET, -T651 PLATE), SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 4131 : 2011 | ALUMINUM ALLOY, DIE AND HAND FORGINGS - 5.6ZN - 2.5MG - 1.6CU - 0.23CR (7075-T-74), SOLUTION AND PRECIPITATION HEAT TREATED AND AGED |
| SAE AMS 4223 : 2015 | ALUMINUM ALLOY, CASTINGS, 4.5CU - 0.70AG - 0.30MN - 0.25MG - 0.25TI (A201.0-T4), SOLUTION HEAT TREATED AND NATURALLY AGED |
| SAE AMS 4353 : 2014 | ALUMINUM ALLOY, EXTRUDED ROUND ROD, 3.5CU - 1.0LI - 0.40MG - 0.45AG - 0.12ZR (2050-T84) SOLUTION HEAT TREATED, STRESS RELIEVED BY STRETCHING, AND ARTIFICIALLY AGED |
| SAE AMS 4213 : 2016 | ALUMINUM ALLOY PLATE (2027-T351) 4.4CU - 1.2MG - 0.8MN - 0.10ZR, SOLUTION HEAT TREATED, COLD WORKED AND NATURALLY AGED |
| SAE AMS 4415 : 2015 | ALUMINUM ALLOY EXTRUSIONS, 8.9ZN - 2.2CU - 2.2MG - 0.15ZR (7136-T76511, -T76510) SOLUTION HEAT TREATED, STRESS-RELIEVED, STRAIGHTENED, AND OVERAGED |
| SAE AMS 4459 : 2013 | ALUMINUM ALLOY, EXTRUSION, 2.7CU - 1.8LI - 0.7ZN - 0.3MN - 0.3MG - 0.08ZR (2099-T81), SOLUTION HEAT TREATED, STRESS RELIEVED BY STRETCHING 1 TO 3% AND AGED |
| SAE AMS4304C:2009(S2022) | Aluminum Alloy, Discontinuously Reinforced Sheet 2009/SiC/15w (T8P) Solution Heat Treated, Stretched, and Precipitation Heat Treated(STABILIZED Nov 2022) |
| SAE AMS4458B:2022 | Aluminum Alloy, Plate (2.7 Cu - 1.8 Li - 0.7 Zn) 2099-T86 Solution Heat Treated, Cold Worked, and Artificially Aged |
| SAE AMS4478B:2023 | Aluminum Alloy, Sheet and Plate, Alclad 4.4Cu - 1.5Mg - 0.60Mn (Alclad 2024, -T81 Sheet, -T851 Plate) Solution Heat Treated, Cold Worked and Artificially Aged |
| SAE AMS4466B:2022 | Aluminum Alloy, Sheet and Plate, Alclad 4.4Cu - 1.5Mg - 0.60Mn (Alclad 2024, -T361 Sheet and Plate) Solution Heat Treated, 6% Cold Worked, and Naturally Aged |
| SAE AMS4613B:2022 | Aluminum Alloy, Sheet and Plate, 6.3Cu - 0.30Mn - 0.06Ti - 0.10V - 0.18Zr, Solution Heat Treated, Cold Worked (8%) and Precipitation Heat Treated (2219 -T87) |
| SAE AMS 4325 : 2013 | ALUMINUM ALLOY, EXTRUDED WIDE PANEL PROFILES (7150-T77511), 6.4ZN - 2.4MG - 2.2CU - 0.12ZR, SOLUTION HEAT TREATED, STRESS-RELIEVED, STRAIGHTENED AND OVERAGED |
| SAE AMS 4172 : 2013 | ALUMINUM ALLOY, EXTRUSIONS 1.0MG - 0.60SI - 0.28CU - 0.20CR (6061-T4511 OR T4510) SOLUTION HEAT TREATED AND STRESS RELIEVED BY STRETCHING |
| SAE AMS 4274 : 2013 | ALUMINUM ALLOY, ALCLAD SHEET, 4.4CU - 1.5MG - 0.60MN (ALCLAD 2024-0), ANNEALED, FINE GRAIN |
| SAE AMS 4068 : 2015 | ALUMINUM ALLOY, DRAWN SEAMLESS TUBING, 6.3CU - 0.30MN - 0.18ZR - 0.10V - 0.06TI (2219-T3511), SOLUTION HEAT TREATED AND STRESS RELIEVED BY STRETCHING |
| SAE AMS 4351 : 2014 | ALUMINUM ALLOY, PLATE (7065-T7651) 7.7ZN - 2.1CU - 1.65MG - 0.10ZR SOLUTION HEAT TREATED, STRESS-RELIEVED, AND OVERAGED |
| SAE AMS 4081 : 2014 | ALUMINUM ALLOY TUBING, HYDRAULIC, SEAMLESS, DRAWN, ROUND, 1.0MG - 0.60SI - 0.28CU - 0.20CR (6061-T4) SOLUTION HEAT TREATED AND NATURALLY AGED |
| SAE AMS 4235 : 2015 | ALUMINUM ALLOY CASTINGS, 4.6CU - 0.35MN - 0.25MG - 0.22TI (A206.0-T7), SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 4186 : 2012 | ALUMINUM ALLOY, BARS, RODS, AND WIRE, ROLLED OR COLD FINISHED, 5.6ZN - 2.5MG - 1.6CU - 0.23CR (7075-F), AS FABRICATED OR WHEN SPECIFIED, ANNEALED (7075-O) |
| SAE AMS 4141 : 2014 | ALUMINUM ALLOY DIE FORGINGS, 5.6ZN - 2.5MG - 1.6CU - 0.23CR (7075-T73), SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 4476 : 2013 | ALUMINUM ALLOY, EXTRUSIONS 5.6ZN - 2.5MG - 1.6CU - 0.23CR (7075-O), ANNEALED |
| SAE AMS 4469 : 2013 | ALUMINUM ALLOY TUBING, SEAMLESS, DRAWN, 1.8 CU - 1.0 MG - 0.8 SI - 0.20 CR, SOLUTION HEAT TREATED, STRESS-RELIEVED BY STRETCHING, AND AGED (2013-T4511) |
| SAE AMS 4128 : 2013 | ALUMINUM ALLOY BARS, ROLLED OR COLD FINISHED, 1.0MG - 0.60SI - 0.30CU - 0.20CR (6061-T451), SOLUTION HEAT TREATED AND STRESS RELIEVED BY STRETCHING |
| SAE AMS 4208 : 2016 | ALUMINUM ALLOY SHEET, 6.0CU - 0.40ZR - (2004-F), AS ROLLED |
| SAE AMS 4482 : 2012 | CAST ALUMINUM ALLOY COMPOSITE 4.6 CU - 3.4TI - 1.4B - 0.75AG - 0.27MG (A205.0/TIB2/3P-T7P) SAND CAST, SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 4050 : 2014 | ALUMINUM ALLOY, PLATE, 6.2ZN - 2.3CU - 2.2MG - 0.12ZR (7050-T7451), SOLUTION HEAT TREATED, STRESS RELIEVED, AND OVERAGED |
| SAE AMS 4202 : 2005 | ALUMINUM ALLOY, PLATE - 5.7ZN - 2.2MG - 1.6CU - 0.22CR (7475-T7351), SOLUTION HEAT TREATED, STRESS RELIEVED BY STRETCHING, AND PRECIPITATION HEAT TREATED |
| SAE AMS 4216 : 2013 | ALUMINUM ALLOY, SHEET, 1.0MG - 0.8SI - 0.8CU - 0.50MN, (6013-T6), SOLUTION HEAT TREATED AND ARTIFICIALLY AGED |
| SAE AMS 4156 : 2015 | ALUMINUM ALLOY, EXTRUSIONS 0.68MG - 0.40SI (6063-T6) SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 4320 : 2014 | ALUMINUM ALLOY FORGINGS, 7.7ZN - 2.5MG - 1.5CU - 0.16CR (7149-T73), SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 4031 : 2017 | ALUMINUM ALLOY, SHEET AND PLATE, 6.3CU - 0.30MN - 0.18ZR - 0.10V - 0.06TI (2219-O) ANNEALED OR WHEN SPECIFIED, 'AS FABRICATED' (2219-F) |
| SAE AMS 4143 : 2012 | ALUMINUM ALLOY FORGINGS AND ROLLED OR FORGED RINGS, 6.3CU - 0.30MN - 0.18ZR - 0.10V - 0.06TI (2219-T6), SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 4204 : 2013 | ALUMINUM ALLOY, PLATE, 6.2ZN - 1.8CU - 2.4MG - 0.13ZR (7010-T7651), SOLUTION HEAT TREATED, STRESS RELIEVED, AND PRECIPITATION HEAT TREATED |
| SAE AMS 4257 : 2014 | ALUMINUM ALLOY, EXTRUSION 3.7CU - 1.15LI - 0.5ZN - 0.45AG - 0.4MG - 0.3MN - 0.1ZR (2055-T84) SOLUTION HEAT TREATED, STRESS RELIEVED BY STRETCHING 2% TO 5% AND AGED |
| SAE AMS 4115 : 2015 | ALUMINUM ALLOY, ROLLED OR COLD-FINISHED, BARS, RODS, WIRE, AND FLASH WELDED RINGS, ANNEALED, 1.0MG - 0.60SI - 0.28CU - 0.20CR (6061-O) |
| SAE AMS 4314 : 2012 | ALUMINUM ALLOY, RINGS, ROLLED OR FORGED 4.5CU - 0.85SI - 0.80MN - 0.50MG (2014-T651, 2014-T652) SOLUTION HEAT TREATED, MECHANICALLY STRESS RELIEVED AND PRECIPITATION HEAT TREATED |
| SAE AMS 4458 : 2016 | ALUMINUM ALLOY, PLATE (2.7 CU - 1.8 LI - 0.7 ZN) 2099-T86, SOLUTION HEAT TREATED, COLD WORKED AND ARTIFICIALLY AGED |
| SAE AMS 4117 : 2015 | ALUMINUM ALLOY, ROLLED OR COLD FINISHED BARS, RODS, AND WIRE AND FLASH WELDED RINGS, 1.0MG - 0.60SI - 0.28CU - 0.20CR (6061; -T6, -T651) |
| SAE AMS 2772 : 2016 | HEAT TREATMENT OF ALUMINUM ALLOY RAW MATERIALS |
| SAE AMS 4278 : 2013 | ALUMINUM ALLOY, ALCLAD SHEET 5.6ZN - 2.5MG - 1.6CU - 0.23CR (ALCLAD 7075-0) ANNEALED, FINE GRAINED |
| SAE AMS 4306 : 2018 | ALUMINUM ALLOY, PLATE, 6.4ZN - 2.4MG - 2.2CU - 0.12ZR (7150-T6151), SOLUTION HEAT TREATED, STRESS RELIEVED, AND AGED |
| SAE AMS 4410 : 2013 | ALUMINUM ALLOY PLATE (7081-T7451), 7.2ZN - 1.5CU - 2.0MG - 0.10ZR, SOLUTION HEAT TREATED, STRESS RELIEVED AND OVERAGED |
| SAE AMS 4200 : 2017 | ALUMINUM ALLOY PLATE, 7.7ZN - 2.4MG - 1.6CU - 0.16CR (7049-T7351), SOLUTION HEAT TREATED, STRESS RELIEVED, AND PRECIPITATION HEAT TREATED |
| SAE AMS 4412 : 2015 | ALUMINUM ALLOY, SHEET, 3.2CU - 0.52MG - 0.30AG - 0.12ZR (2198-T8), SOLUTION HEAT TREATED, COLD WORKED, AND ARTIFICIALLY AGED |
| SAE AMS 4154 : 2015 | ALUMINUM ALLOY, EXTRUSIONS 5.6ZN - 2.5MG - 1.6CU - 0.23CR (7075-T6, 7075-T6510, 7075-T6511) SOLUTION HEAT TREATED, STRESS RELIEVED BY STRETCHING WHEN REQUIRED AND PRECIPITATION HEAT TREATED |
| SAE AMS 4183 : 2016 | ALUMINUM ALLOY, EXTRUDED PROFILES (2027-T3511) 4.4CU - 1.2MG - 0.8MN - 0.10ZR, SOLUTION HEAT TREATED AND STRESS RELIEVED BY STRETCHING |
| SAE AMS 4209 : 2016 | ALUMINUM ALLOY SHEET, ALCLAD, 6.0CU - 0.40ZR - (2004-F), AS ROLLED |
| SAE AMS 4409 : 2013 | ALUMINUM ALLOY, PLATE, 4.0ZN - 2.0MG - 0.32MN (7019-T651), SOLUTION HEAT TREATED, STRESS RELIEVED AND ARTIFICIALLY AGED |
| SAE AMS 4331 : 2014 | ALUMINUM ALLOY EXTRUSIONS 7.8ZN - 2.6MG - 2.0CU - 0.10ZR - (7068-T6511) SOLUTION HEAT TREATED, STRESS RELIEVED, AND PRECIPITATION HEAT TREATED |
| SAE AMS 4160 : 2013 | ALUMINUM ALLOY, EXTRUSIONS 1.0MG - 0.60SI - 0.28CU - 0.20CR (6061-0), ANNEALED |
| SAE AMS 4411 : 2013 | ALUMINUM ALLOY PLATE (7081-T7651), 7.2ZN - 1.5CU - 2.0MG - 0.10ZR, SOLUTION HEAT TREATED, STRESS RELIEVED AND OVERAGED |
| SAE AMS 4127 : 2012 | ALUMINUM ALLOY, FORGINGS AND ROLLED OR FORGED RINGS, (6061-T6) SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 4479 : 2015 | ALUMINUM ALLOY, EXTRUDED PROFILES (2824-T3511) 4.0CU - 1.35MG - 0.7MN SOLUTION HEAT TREATED AND STRESS RELIEVED BY STRETCHING |
| SAE AMS 4084 : 2017 | ALUMINUM ALLOY SHEET, 5.7ZN - 2.2MG - 1.6CU - 0.22CR (7475-T61), SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 4304 : 2015 | ALUMINUM ALLOY, DISCONTINUOUSLY REINFORCED SHEET, 2009/SIC/15W (T8P), SOLUTION HEAT TREATED, STRETCHED, AND PRECIPITATION HEAT TREATED |
| SAE AMS 4165 : 2013 | ALUMINUM ALLOY, EXTRUSIONS, 4.4CU - 1.5MG - 0.60MN (2024-T3511), SOLUTION HEAT TREATED, STRESS-RELIEVED BY STRETCHING, AND STRAIGHTENED |
| SAE AMS 4122 : 2012 | ALUMINUM ALLOY BARS, RODS, AND WIRE ROLLED OR COLD FINISHED, AND RINGS, 5.6ZN - 2.5MG - 1.6CU - 0.23CR (7075-T6, 7075-T651), SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 4201 : 2014 | ALUMINUM ALLOY PLATE 6.2ZN - 2.3CU - 2.2MG - 0.12ZR (7050-T7651) SOLUTION HEAT TREATED, STRESS RELIEVED, AND OVERAGED |
| SAE AMS 4205 : 2015 | ALUMINUM ALLOY, PLATE 6.2ZN - 1.8CU - 2.4MG - 0.13ZR (7010-T7451) SOLUTION HEAT TREATED, STRESS RELIEVED, AND PRECIPITATION HEAT TREATED |
| SAE AMS 4347 : 2014 | ALUMINUM ALLOY SHEET, 1.0MG - 0.8SI - 0.8CU - 0.5MN (6013-T4), SOLUTION HEAT TREATED AND NATURALLY AGED |
| SAE AMS 4150 : 2013 | ALUMINUM ALLOY, EXTRUSIONS AND RINGS 1.0MG - 0.60SI - 0.28CU - 0.20CR - (6061-T6) SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 4286 : 2015 | ALUMINUM ALLOY CASTINGS, PERMANENT MOLD, 7.0SI - 0.32MG (356.0-T51), AS-CAST THEN PRECIPITATION HEAT TREATED |
| SAE AMS 4147 : 2012 | ALUMINUM ALLOY FORGINGS 5.6ZN - 2.5MG - 1.6CU - 0.23CR (7075-T7352) SOLUTION HEAT TREATED, STRESS RELIEVED BY COMPRESSION, AND OVERAGED |
| SAE AMS 4460 : 2015 | ALUMINUM ALLOY, CLAD TWO SIDES SHEET, 0.6MG - 0.35SI - 0.28CU (NO. 24 BRAZING SHEET), AS FABRICATED |
| SAE AMS 4474 : 2015 | ALUMINUM ALLOY, SHEET AND PLATE, 4.0CU - 1.0LI - 0.40MG - 0.35AG - 0.13ZR (2195-T8), SOLUTION HEAT TREATED, COLD WORKED, AND ARTIFICIALLY AGED |
| SAE AMS 4089 : 2014 | ALUMINUM ALLOY, PLATE 1.6CU - 2.2MG - 0.22CR - 5.7ZN (7475-T7651) SOLUTION HEAT TREATED, STRESS RELIEVED BY STRETCHING, AND PRECIPITATION HEAT TREATED |
| SAE AMS 4118 : 2014 | ALUMINUM ALLOY, ROLLED OR COLD FINISHED BARS, RODS, AND WIRE, 4.0CU - 0.70MN - 0.60MG - 0.50SI (2017; -T4, -T451), SOLUTION HEAT TREATED |
| SAE AMS 4404 : 2014 | ALUMINUM ALLOY, EXTRUDED PROFILES (6056-T4511), 1.0SI - 0.90MG - 0.80CU - 0.60MN - 0.40ZN, SOLUTION HEAT TREATED AND STRESS-RELIEVED BY STRETCHING |
| SAE AMS 4025 : 2014 | ALUMINUM ALLOY, SHEET AND PLATE, 1.0MG - 0.60SI - 0.28CU - 0.20CR (6061-O) ANNEALED |
| SAE AMS 4333 : 2015 | ALUMINUM ALLOY, DIE FORGINGS 6.2ZN - 2.3CU - 2.2MG - 0.12ZR (7050-T7452) SOLUTION HEAT TREATED, COMPRESSION STRESS-RELIEVED, AND OVERAGED |
| SAE AMS 4152 : 2007 | ALUMINUM ALLOY EXTRUSIONS 4.4CU - 1.5MG - 0.60MN (2024-T3) SOLUTION HEAT TREATED |
| SAE AMS 4236 : 2015 | ALUMINUM ALLOY CASTINGS, 4.6CU - 0.35MN - 0.25MG - 0.22TI (A206.0-T4), SOLUTION HEAT TREATED AND NATURALLY AGED |
| SAE AMS 4470 : 2012 | ALUMINUM ALLOY, PLATE (7085-T7451), 7.5ZN - 1.6CU - 1.5MG - 0.12ZR, SOLUTION HEAT TREATED, STRESS-RELIEVED, AND OVERAGED |
| SAE AMS 4305 : 2012 | ALUMINUM ALLOY, EXTRUDED PROFILES (7449-T79511) 8.1ZN - 1.8CU - 2.2MG - 0.16ZR SOLUTION HEAT TREATED, STRESS RELIEVED, AND OVERAGED (COMPOSITION SIMILAR TO UNS A97449) |
| SAE AMS 4366 : 2014 | ALUMINUM ALLOY, EXTRUDED PROFILES (2065-T84) 4.2CU - 1.2LI - 0.52MG - 0.32MN - 0.32AG - 0.1ZR SOLUTION HEAT TREATED, STRESS RELIEVED BY STRETCHING AND ARTIFICIALLY AGED |
| SAE AMS 4179 : 2016 | ALUMINUM ALLOY FORGINGS, 5.6ZN - 2.5MG - 1.6CU - 0.23CR (7175-T7452), SOLUTION HEAT TREATED, STRESS RELIEVED, AND PRECIPITATION HEAT TREATED |
| SAE AMS 4361 : 2014 | ALUMINUM ALLOY, PLATE (7065-T7451) 7.7ZN - 2.1CU - 1.65MG - 0.10ZR SOLUTION HEAT TREATED, STRESS-RELIEVED, AND OVERAGED |
| SAE AMS 4161 : 2013 | ALUMINUM ALLOY, EXTRUSIONS 1.0MG - 0.60SI - 0.28CU - 0.20CR (6061-T4) SOLUTION HEAT TREATED AND NATURALLY AGED |
| SAE AMS 4243 : 2014 | ALUMINUM ALLOY, ALCLAD SHEET 6.2ZN - 2.3CU - 2.2MG - 0.12ZR (ALCLAD 7050-T76) SOLUTION HEAT TREATED AND OVERAGED |
| SAE AMS 4037 : 2014 | ALUMINUM ALLOY, SHEET AND PLATE, 4.4CU - 1.5MG - 0.60MN (2024; -T3 FLAT SHEET, -T351 PLATE) SOLUTION HEAT TREATED |
| SAE AMS 4116 : 2015 | ALUMINUM ALLOY, BARS, RODS, AND WIRE, 1.0MG - 0.60SI - 0.30CU - 0.20CR (6061-T4), COLD FINISHED, SOLUTION HEAT TREATED AND NATURALLY AGED |
| SAE AMS 4066 : 2013 | ALUMINUM ALLOY, DRAWN, ROUND SEAMLESS TUBING 6.3CU - 0.30MN - 0.18ZR - 0.10V - 0.06TI - (2219-T8511) SOLUTION HEAT TREATED, STRESS RELIEVED BY STRETCHING AND PRECIPITATION HEAT TREATED |
| SAE AMS 4323 : 2015 | ALUMINUM ALLOY, HAND FORGINGS 5.6ZN - 2.5MG - 1.6CU - 0.23CR (7075-T7452) SOLUTION HEAT TREATED, STRESS RELIEVED, AND PRECIPITATION HEAT TREATED |
| SAE AMS 4126 : 2010 | ALUMINUM ALLOY, DIE AND HAND FORGINGS AND ROLLED RINGS - 5.6ZN - 2.5MG - 1.6CU - 0.23CR (7079-T6) SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 4164 : 2013 | ALUMINUM ALLOY, EXTRUSIONS, 4.4CU - 1.5MG - 0.60MN (2024-T3510), STRESS-RELIEF STRETCHED, UNSTRAIGHTENED |
| SAE AMS 4336 : 2013 | ALUMINUM ALLOY, EXTRUDED ROD, BAR, AND PROFILES (7055-T76511) - 8.0ZN - 2.3CU - 2.0MG - 0.16ZR - SOLUTION HEAT TREATED, STRESS-RELIEVED, AND OVERAGED |
| SAE AMS 4088 : 2015 | ALUMINUM ALLOY, DRAWN, SEAMLESS TUBING 4.4CU - 1.5MG - 0.60MN (2024-T3) SOLUTION HEAT TREATED AND COLD WORKED |
| SAE AMS 4414 : 2013 | ALUMINUM ALLOY, HAND FORGINGS, 7.5ZN - 1.6CU - 1.5MG - 0.12ZR (7085-T7452), SOLUTION HEAT TREATED, COMPRESSION STRESS-RELIEVED, AND OVERAGED |
| SAE AMS 4080 : 2016 | ALUMINUM ALLOY, DRAWN SEAMLESS TUBING, 1.0MG - 0.60SI - 0.28CU - 0.20CR (6061-0), ANNEALED |
| SAE AMS 4124 : 2012 | ALUMINUM ALLOY, ROLLED OR COLD FINISHED BARS, RODS, AND WIRE - 5.6ZN - 2.5MG - 1.6CU - 0.23CR (7075-T7351), SOLUTION HEAT TREATED, STRESS RELIEVED BY STRETCHING, AND OVERAGED |
| SAE AMS 4132 : 2013 | ALUMINUM ALLOY, DIE AND HAND FORGINGS, ROLLED RINGS, AND FORGING STOCK, 2.3CU - 1.6MG - 1.1FE - 1.0NI - 0.18SI - 0.07TI (2618-T61), SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 4100 : 2016 | ALUMINUM ALLOY, ALCLAD, SHEET, 5.7ZN - 2.2MG - 1.6CU - 0.22CR (ALCLAD 7475-T761), SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 4029 : 2012 | ALUMINUM ALLOY SHEET AND PLATE (2014; -T6 SHEET, -T651 PLATE) SOLUTION AND PRECIPITATION HEAT TREATED (COMPOSITION SIMILAR TO UNS A92014) |
| SAE AMS 4457 : 2014 | ALUMINUM ALLOY, SHEET 3.5CU - 1.1LI - 0.50MG - 0.40AG - 0.12ZR (2098-T8) SOLUTION HEAT TREATED, COLD WORKED, AND ARTIFICIALLY AGED |
| SAE AMS 4324 : 2016 | ALUMINUM ALLOY, EXTRUDED ROD, BAR AND PROFILES (7055-T74511), 8.0ZN - 2.3CU - 2.0MG - 0.16ZR, SOLUTION HEAT TREATED, STRESS-RELIEVED, AND OVERAGED |
| SAE AMS 4471 : 2014 | CAST ALUMINUM ALLOY COMPOSITE 4.6CU - 3.4TI - 1.4B - 0.75AG - 0.27MG (205.0/TIB[2]/3P-T7P) INVESTMENT CAST, SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 4153 : 2015 | ALUMINUM ALLOY, EXTRUSIONS 4.5CU - 0.85SI - 0.80MN - 0.50MG (2014-T6) SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 4356 : 2016 | ALUMINUM ALLOY SEAMLESS DRAWN ROUND TUBING, 2.3 CU - 8.0 ZN - 2.0 MG - 0.16 ZR (7155-T76), SOLUTION HEAT TREATED AND AGED |
| SAE AMS 4242 : 2015 | ALUMINUM ALLOY, CASTINGS, 4.7CU - 0.60AG - 0.35MN - 0.25MG - 0.25TI (B201.0-T7), SOLUTION HEAT TREATED AND OVERAGED |
| SAE AMS 4096 : 2016 | ALUMINUM ALLOY SHEET AND PLATE, ALCLAD, 6.3CU - 0.30MN - 0.18ZR - 0.10V - 0.06TI (ALCLAD 2219-O), ANNEALED |
| SAE AMS 4354 : 2016 | ALUMINUM ALLOY, PLATE, 7.9ZN - 1.8CU - 2.0MG - 0.10ZR (7099-T7451) SOLUTION HEAT TREATED, STRESS RELIEVED, AND OVERAGED |
| SAE AMS 4287 : 2013 | ALUMINUM ALLOY, EXTRUSION, 2.7 CU - 1.8 LI - 0.7 ZN - 0.3 MN - 0.3 MG - 0.08 ZR (2099-T83), SOLUTION HEAT TREATED, STRESS RELIEVED BY STRETCHING 1% TO 4% AND AGED |
| SAE AMS4342G:2023 | Aluminum Alloy, Extrusions 6.2Zn - 2.3Cu - 2.2Mg - 0.12Zr (7050-T74511) Solution Heat Treated, Stress Relieved, Straightened, and Overaged |
| SAE AMS4193E:2023 | Aluminum Alloy, Sheet, and Plate 4.4Cu - 1.5Mg - 0.60Mn (2024-T861) Solution Heat Treated, Cold Worked, and Precipitation Heat Treated |
| ANSI H35.1/H35.1M : 2017 | ALLOY AND TEMPER DESIGNATION SYSTEMS FOR ALUMINUM |
| EN 515:2017 | Aluminium and aluminium alloys - Wrought products - Temper designations |
| ISO 2107:2007 | Aluminium and aluminium alloys — Wrought products — Temper designations |
$274.19
Including GST where applicable
AUD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - English
PDF - English
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.